Pull befs fix from Luis de Bethencourt:
 "One fix from Fabian Frederick making the nfs client still work after a
  cache drop"

* tag 'befs-v4.12-rc1' of git://github.com/luisbg/linux-befs:
  befs: make export work with cold dcache

Pull initramfs fix from Stafford Horne:
 "This is a fix for an issue that has caused 4.11 to not boot on
  OpenRISC. I should have caught this during the 4.11 cycle but I had
  been busy on testing some other series of patches.

  I would have considered pushing it though a different path but Al Viro
  suggested submitting directly to you.

  Also, its just one as I havent really got anything else ready on my
  queue for 4.12.

  Summary:

   - Ensure fput() flush is done even for builtin initramfs"

* tag 'initramfs-fix-4.12-rc1' of git://github.com/stffrdhrn/linux:
  initramfs: Always do fput() and load modules after rootfs populate

Pull arm64 updates from Catalin Marinas:

 - kdump support, including two necessary memblock additions:
   memblock_clear_nomap() and memblock_cap_memory_range()

 - ARMv8.3 HWCAP bits for JavaScript conversion instructions, complex
   numbers and weaker release consistency

 - arm64 ACPI platform MSI support

 - arm perf updates: ACPI PMU support, L3 cache PMU in some Qualcomm
   SoCs, Cortex-A53 L2 cache events and DTLB refills, MAINTAINERS update
   for DT perf bindings

 - architected timer errata framework (the arch/arm64 changes only)

 - support for DMA_ATTR_FORCE_CONTIGUOUS in the arm64 iommu DMA API

 - arm64 KVM refactoring to use common system register definitions

 - remove support for ASID-tagged VIVT I-cache (no ARMv8 implementation
   using it and deprecated in the architecture) together with some
   I-cache handling clean-up

 - PE/COFF EFI header clean-up/hardening

 - define BUG() instruction without CONFIG_BUG

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (92 commits)
  arm64: Fix the DMA mmap and get_sgtable API with DMA_ATTR_FORCE_CONTIGUOUS
  arm64: Print DT machine model in setup_machine_fdt()
  arm64: pmu: Wire-up Cortex A53 L2 cache events and DTLB refills
  arm64: module: split core and init PLT sections
  arm64: pmuv3: handle pmuv3+
  arm64: Add CNTFRQ_EL0 trap handler
  arm64: Silence spurious kbuild warning on menuconfig
  arm64: pmuv3: use arm_pmu ACPI framework
  arm64: pmuv3: handle !PMUv3 when probing
  drivers/perf: arm_pmu: add ACPI framework
  arm64: add function to get a cpu's MADT GICC table
  drivers/perf: arm_pmu: split out platform device probe logic
  drivers/perf: arm_pmu: move irq request/free into probe
  drivers/perf: arm_pmu: split cpu-local irq request/free
  drivers/perf: arm_pmu: rename irq request/free functions
  drivers/perf: arm_pmu: handle no platform_device
  drivers/perf: arm_pmu: simplify cpu_pmu_request_irqs()
  drivers/perf: arm_pmu: factor out pmu registration
  drivers/perf: arm_pmu: fold init into alloc
  drivers/perf: arm_pmu: define armpmu_init_fn
  ...

Pull powerpc updates from Michael Ellerman:
 "Highlights include:

   - Larger virtual address space on 64-bit server CPUs. By default we
     use a 128TB virtual address space, but a process can request access
     to the full 512TB by passing a hint to mmap().

   - Support for the new Power9 "XIVE" interrupt controller.

   - TLB flushing optimisations for the radix MMU on Power9.

   - Support for CAPI cards on Power9, using the "Coherent Accelerator
     Interface Architecture 2.0".

   - The ability to configure the mmap randomisation limits at build and
     runtime.

   - Several small fixes and cleanups to the kprobes code, as well as
     support for KPROBES_ON_FTRACE.

   - Major improvements to handling of system reset interrupts,
     correctly treating them as NMIs, giving them a dedicated stack and
     using a new hypervisor call to trigger them, all of which should
     aid debugging and robustness.

   - Many fixes and other minor enhancements.

  Thanks to: Alastair D'Silva, Alexey Kardashevskiy, Alistair Popple,
  Andrew Donnellan, Aneesh Kumar K.V, Anshuman Khandual, Anton
  Blanchard, Balbir Singh, Ben Hutchings, Benjamin Herrenschmidt,
  Bhupesh Sharma, Chris Packham, Christian Zigotzky, Christophe Leroy,
  Christophe Lombard, Daniel Axtens, David Gibson, Gautham R. Shenoy,
  Gavin Shan, Geert Uytterhoeven, Guilherme G. Piccoli, Hamish Martin,
  Hari Bathini, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Mahesh J
  Salgaonkar, Mahesh Salgaonkar, Masami Hiramatsu, Matt Brown, Matthew
  R. Ochs, Michael Neuling, Naveen N. Rao, Nicholas Piggin, Oliver
  O'Halloran, Pan Xinhui, Paul Mackerras, Rashmica Gupta, Russell
  Currey, Sukadev Bhattiprolu, Thadeu Lima de Souza Cascardo, Tobin C.
  Harding, Tyrel Datwyler, Uma Krishnan, Vaibhav Jain, Vipin K Parashar,
  Yang Shi"

* tag 'powerpc-4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (214 commits)
  powerpc/64s: Power9 has no LPCR[VRMASD] field so don't set it
  powerpc/powernv: Fix TCE kill on NVLink2
  powerpc/mm/radix: Drop support for CPUs without lockless tlbie
  powerpc/book3s/mce: Move add_taint() later in virtual mode
  powerpc/sysfs: Move #ifdef CONFIG_HOTPLUG_CPU out of the function body
  powerpc/smp: Document irq enable/disable after migrating IRQs
  powerpc/mpc52xx: Don't select user-visible RTAS_PROC
  powerpc/powernv: Document cxl dependency on special case in pnv_eeh_reset()
  powerpc/eeh: Clean up and document event handling functions
  powerpc/eeh: Avoid use after free in eeh_handle_special_event()
  cxl: Mask slice error interrupts after first occurrence
  cxl: Route eeh events to all drivers in cxl_pci_error_detected()
  cxl: Force context lock during EEH flow
  powerpc/64: Allow CONFIG_RELOCATABLE if COMPILE_TEST
  powerpc/xmon: Teach xmon oops about radix vectors
  powerpc/mm/hash: Fix off-by-one in comment about kernel contexts ids
  powerpc/pseries: Enable VFIO
  powerpc/powernv: Fix iommu table size calculation hook for small tables
  powerpc/powernv: Check kzalloc() return value in pnv_pci_table_alloc
  powerpc: Add arch/powerpc/tools directory
  ...

Pull namespace updates from Eric Biederman:
 "This is a set of small fixes that were mostly stumbled over during
  more significant development. This proc fix and the fix to
  posix-timers are the most significant of the lot.

  There is a lot of good development going on but unfortunately it
  didn't quite make the merge window"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  proc: Fix unbalanced hard link numbers
  signal: Make kill_proc_info static
  rlimit: Properly call security_task_setrlimit
  signal: Remove unused definition of sig_user_definied
  ia64: Remove unused IA64_TASK_SIGHAND_OFFSET and IA64_SIGHAND_SIGLOCK_OFFSET
  ipc: Remove unused declaration of recompute_msgmni
  posix-timers: Correct sanity check in posix_cpu_nsleep
  sysctl: Remove dead register_sysctl_root

While honouring the DMA_ATTR_FORCE_CONTIGUOUS on arm64 (commit
44176bb3: "arm64: Add support for DMA_ATTR_FORCE_CONTIGUOUS to
IOMMU"), the existing uses of dma_mmap_attrs() and dma_get_sgtable()
have been broken by passing a physically contiguous vm_struct with an
invalid pages pointer through the common iommu API.

Since the coherent allocation with DMA_ATTR_FORCE_CONTIGUOUS uses CMA,
this patch simply reuses the existing swiotlb logic for mmap and
get_sgtable.

Note that the current implementation of get_sgtable (both swiotlb and
iommu) is broken if dma_declare_coherent_memory() is used since such
memory does not have a corresponding struct page. To be addressed in a
subsequent patch.

Fixes: 44176bb3 ("arm64: Add support for DMA_ATTR_FORCE_CONTIGUOUS to IOMMU")
Reported-by: Andrzej Hajda <a.hajda@samsung.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

based on commit b3b42c0d
("fs/affs: make export work with cold dcache")

This adds get_parent function so that nfs client can still work after
cache drop (Tested on NFS v4 with echo 3 > /proc/sys/vm/drop_caches)
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>

In OpenRISC we do not have a bootloader passed initrd, but the built in
initramfs does contain the /init and other binaries, including modules.
The previous commit 08865514 ("initramfs: finish fput() before
accessing any binary from initramfs") made a change to only call fput()
if the bootloader initrd was available, this caused intermittent crashes
for OpenRISC.

This patch changes the fput() to happen unconditionally if any rootfs is
loaded. Also, I added some comments to make it a bit more clear why we
call unpack_to_rootfs() multiple times.

Fixes: 08865514 ("initramfs: finish fput() before accessing any binary from initramfs")
Cc: stable@vger.kernel.org
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Stafford Horne <shorne@gmail.com>

Pull char/misc driver updates from Greg KH:
 "Here is the big set of new char/misc driver drivers and features for
  4.12-rc1.

  There's lots of new drivers added this time around, new firmware
  drivers from Google, more auxdisplay drivers, extcon drivers, fpga
  drivers, and a bunch of other driver updates. Nothing major, except if
  you happen to have the hardware for these drivers, and then you will
  be happy :)

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (136 commits)
  firmware: google memconsole: Fix return value check in platform_memconsole_init()
  firmware: Google VPD: Fix return value check in vpd_platform_init()
  goldfish_pipe: fix build warning about using too much stack.
  goldfish_pipe: An implementation of more parallel pipe
  fpga fr br: update supported version numbers
  fpga: region: release FPGA region reference in error path
  fpga altera-hps2fpga: disable/unprepare clock on error in alt_fpga_bridge_probe()
  mei: drop the TODO from samples
  firmware: Google VPD sysfs driver
  firmware: Google VPD: import lib_vpd source files
  misc: lkdtm: Add volatile to intentional NULL pointer reference
  eeprom: idt_89hpesx: Add OF device ID table
  misc: ds1682: Add OF device ID table
  misc: tsl2550: Add OF device ID table
  w1: Remove unneeded use of assert() and remove w1_log.h
  w1: Use kernel common min() implementation
  uio_mf624: Align memory regions to page size and set correct offsets
  uio_mf624: Refactor memory info initialization
  uio: Allow handling of non page-aligned memory regions
  hangcheck-timer: Fix typo in comment
  ...

Merge tag 'driver-core-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Very tiny pull request for 4.12-rc1 for the driver core this time
  around.

  There are some documentation fixes, an eventpoll.h fixup to make it
  easier for the libc developers to take our header files directly, and
  some very minor driver core fixes and changes.

  All have been in linux-next for a very long time with no reported
  issues"

* tag 'driver-core-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  Revert "kref: double kref_put() in my_data_handler()"
  driver core: don't initialize 'parent' in device_add()
  drivers: base: dma-mapping: use nth_page helper
  Documentation/ABI: add information about cpu_capacity
  debugfs: set no_llseek in DEFINE_DEBUGFS_ATTRIBUTE
  eventpoll.h: add missing epoll event masks
  eventpoll.h: fix epoll event masks

Pull USB updates from Greg KH:
 "Here is the big USB patchset for 4.12-rc1.

  Lots of good stuff here, after many many many attempts, the kernel
  finally has a working typeC interface, many thanks to Heikki and
  Guenter and others who have taken the time to get this merged. It
  wasn't an easy path for them at all.

  There's also a staging driver that uses this new api, which is why
  it's coming in through this tree.

  Along with that, there's the usual huge number of changes for gadget
  drivers, xhci, and other stuff. Johan also finally refactored pretty
  much every driver that was looking at USB endpoints to do it in a
  common way, which will help prevent any "badly-formed" devices from
  causing problems in drivers. That too wasn't a simple task.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits)
  staging: typec: Fairchild FUSB302 Type-c chip driver
  staging: typec: Type-C Port Controller Interface driver (tcpci)
  staging: typec: USB Type-C Port Manager (tcpm)
  usb: host: xhci: remove #ifdef around PM functions
  usb: musb: don't mark of_dev_auxdata as initdata
  usb: misc: legousbtower: Fix buffers on stack
  USB: Revert "cdc-wdm: fix "out-of-sync" due to missing notifications"
  usb: Make sure usb/phy/of gets built-in
  USB: storage: e-mail update in drivers/usb/storage/unusual_devs.h
  usb: host: xhci: print correct command ring address
  usb: host: xhci: delete sp_dma_buffers for scratchpad
  usb: host: xhci: using correct specification chapter reference for DCBAAP
  xhci: switch to pci_alloc_irq_vectors
  usb: host: xhci-plat: set resume_quirk() for R-Car controllers
  usb: host: xhci-plat: add resume_quirk()
  usb: host: xhci-plat: enable clk in resume timing
  usb: host: plat: Enable xHCI plat runtime PM
  USB: serial: ftdi_sio: add device ID for Microsemi/Arrow SF2PLUS Dev Kit
  USB: serial: constify static arrays
  usb: fix some references for /proc/bus/usb
  ...

Pull networking fixes from David Miller:

 1) The wireless rate info fix from Johannes Berg.

 2) When a RAW socket is in hdrincl mode, we need to make sure that the
    user provided at least a minimally sized ipv4/ipv6 header. Fix from
    Alexander Potapenko.

 3) We must emit IFLA_PHYS_PORT_NAME netlink attributes using
    nla_put_string() so that it is NULL terminated.

 4) Fix a bug in TCP fastopen handling, wherein child sockets
    erroneously inherit the fastopen_req from the parent, and later can
    end up derefencing freed memory or doing a double free. From Eric
    Dumazet.

 5) Don't clear out netdev stats at close time in tg3 driver, from
    YueHaibing.

 6) Fix refcount leak in xt_CT, from Gao Feng.

 7) In nft_set_bitmap() don't leak dummy elements, from Liping Zhang.

 8) Fix deadlock due to taking the expectation lock twice, also from
    Liping Zhang.

 9) Make xt_socket work again with ipv6, from Peter Tirsek.

10) Don't allow IPV6 to be used with IPVS if ipv6.disable=1, from Paolo
    Abeni.

11) Make the BPF loader more flexible wrt. changes to the bpf MAP entry
    layout. From Jesper Dangaard Brouer.

12) Fix ethtool reported device name in aquantia driver, from Pavel
    Belous.

13) Fix build failures due to the compile time size test not working in
    netfilter conntrack. From Geert Uytterhoeven.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits)
  cfg80211: make RATE_INFO_BW_20 the default
  ipv6: initialize route null entry in addrconf_init()
  qede: Fix possible misconfiguration of advertised autoneg value.
  qed: Fix overriding of supported autoneg value.
  qed*: Fix possible overflow for status block id field.
  rtnetlink: NUL-terminate IFLA_PHYS_PORT_NAME string
  netvsc: make sure napi enabled before vmbus_open
  aquantia: Fix driver name reported by ethtool
  ipv4, ipv6: ensure raw socket message is big enough to hold an IP header
  net/sched: remove redundant null check on head
  tcp: do not inherit fastopen_req from parent
  forcedeth: remove unnecessary carrier status check
  ibmvnic: Move queue restarting in ibmvnic_tx_complete
  ibmvnic: Record SKB RX queue during poll
  ibmvnic: Continue skb processing after skb completion error
  ibmvnic: Check for driver reset first in ibmvnic_xmit
  ibmvnic: Wait for any pending scrqs entries at driver close
  ibmvnic: Clean up tx pools when closing
  ibmvnic: Whitespace correction in release_rx_pools
  ibmvnic: Delete napi's when releasing driver resources
  ...

Pull SCSI updates from James Bottomley:
 "This update includes the usual round of major driver updates
  (hisi_sas, ufs, fnic, cxlflash, be2iscsi, ipr, stex). There's also the
  usual amount of cosmetic and spelling stuff"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (155 commits)
  scsi: qla4xxx: fix spelling mistake: "Tempalate" -> "Template"
  scsi: stex: make S6flag static
  scsi: mac_esp: fix to pass correct device identity to free_irq()
  scsi: aacraid: pci_alloc_consistent() failures on ARM64
  scsi: ufs: make ufshcd_get_lists_status() register operation obvious
  scsi: ufs: use MASK_EE_STATUS
  scsi: mac_esp: Replace bogus memory barrier with spinlock
  scsi: fcoe: make fcoe_e_d_tov and fcoe_r_a_tov static
  scsi: sd_zbc: Do not write lock zones for reset
  scsi: sd_zbc: Remove superfluous assignments
  scsi: sd: sd_zbc: Rename sd_zbc_setup_write_cmnd
  scsi: Improve scsi_get_sense_info_fld
  scsi: sd: Cleanup sd_done sense data handling
  scsi: sd: Improve sd_completed_bytes
  scsi: sd: Fix function descriptions
  scsi: mpt3sas: remove redundant wmb
  scsi: mpt: Move scsi_remove_host() out of mptscsih_remove_host()
  scsi: sg: reset 'res_in_use' after unlinking reserved array
  scsi: mvumi: remove code handling zero scsi_sg_count(scmd) case
  scsi: fusion: fix spelling mistake: "Persistancy" -> "Persistency"
  ...

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.12 kernel cycle.

  Core changes:

   - Return NULL from gpiod_get_optional() when GPIOLIB is disabled.
     This was a much discussed change. It affects use cases where people
     write drivers that might or might not be using GPIO resources. I
     have decided that this is the lesser evil right now.

   - Make gpiod_count() behave consistently across different hardware
     descriptions.

   - Fix the syntax around open drain/open source to not infer active
     high/low semantics.

  New drivers:

   - A new single-register fixed-direction framework driver for hardware
     that have lines controlled by a single register that just work in
     one direction (out or in), including IRQ support.

   - Support the Fintek F71889A GPIO SuperIO controller.

   - Support the National NI 169445 MMIO GPIO.

   - Support for the X-Gene derivative of the DWC GPIO controller

   - Support for the Rohm BD9571MWV-M PMIC GPIO controller.

   - Refactor the Gemini GPIO driver to a generic Faraday FTGPIO driver
     and replace both the Gemini and the Moxa ART custom drivers with
     this driver.

  Driver improvements:

   - A whole slew of drivers have their spinlocks chaned to raw
     spinlocks as they provide irqchips, and thus we are progressing on
     realtime compliance.

   - Use devm_irq_alloc_descs() in a slew of drivers, getting managed
     resources.

   - Support for the embedded PWM controller inside the MVEBU driver.

   - Debounce, open source and open drain support for the Aspeed driver.

   - Misc smaller fixes like spelling and syntax and whatnot"

* tag 'gpio-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (77 commits)
  gpio: f7188x: Add a missing break
  gpio: omap: return error if requested debounce time is not possible
  gpio: Add ROHM BD9571MWV-M PMIC GPIO driver
  gpio: gpio-wcove: fix GPIO IRQ status mask
  gpio: DT bindings, move tca9554 from pcf857x to pca953x
  gpio: move tca9554 from pcf857x to pca953x
  gpio: arizona: Correct check whether the pin is an input
  gpio: Add XRA1403 DTS binding documentation
  dt-bindings: add exar to vendor prefixes list
  gpio: gpio-wcove: fix irq pending status bit width
  gpio: dwapb: use dwapb_read instead of readl_relaxed
  gpio: aspeed: Add open-source and open-drain support
  gpio: aspeed: Add debounce support
  gpio: aspeed: dt: Add optional clocks property
  gpio: aspeed: dt: Fix description alignment in bindings document
  gpio: mvebu: Add limited PWM support
  gpio: Use unsigned int for interrupt numbers
  gpio: f7188x: Add F71889A GPIO support.
  gpio: core: Decouple open drain/source flag with active low/high
  gpio: arizona: Correct handling for reading input GPIOs
  ...

Pull x86 platform-drivers update from Darren Hart:
 "This represents a significantly larger and more complex set of changes
  than those of prior merge windows.

  In particular, we had several changes with dependencies on other
  subsystems which we felt were best managed through merges of immutable
  branches, including one each from input, i2c, and leds. Two patches
  for the watchdog subsystem are included after discussion with Wim and
  Guenter following a collision in linux-next (this should be resolved
  and you should only see these two appear in this pull request). These
  are called out in the "External" section below.

  Summary of changes:
   - significant further cleanup of fujitsu-laptop and hp-wmi
   - new model support for ideapad, asus, silead, and xiaomi
   - new hotkeys for thinkpad and models using intel-vbtn
   - dell keyboard backlight improvements
   - build and dependency improvements
   - intel * ipc fixes, cleanups, and api updates
   - single isolated fixes noted below

  External:
   - watchdog: iTCO_wdt: Add PMC specific noreboot update api
   - watchdog: iTCO_wdt: cleanup set/unset no_reboot_bit functions
   - Merge branch 'ib/4.10-sparse-keymap-managed'
   - Merge branch 'i2c/for-INT33FE'
   - Merge branch 'linux-leds/dell-laptop-changes-for-4.12'

  platform/x86:
   - Add Intel Cherry Trail ACPI INT33FE device driver
   - remove sparse_keymap_free() calls
   - Make SILEAD_DMI depend on TOUCHSCREEN_SILEAD

  asus-wmi:
   - try to set als by default
   - fix cpufv sysfs file permission

  acer-wmi:
   - setup accelerometer when ACPI device was found

  ideapad-laptop:
   - Add IdeaPad V310-15ISK to no_hw_rfkill
   - Add IdeaPad 310-15IKB to no_hw_rfkill

  intel_pmc_ipc:
   - use gcr mem base for S0ix counter read
   - Fix iTCO_wdt GCS memory mapping failure
   - Add pmc gcr read/write/update api's
   - fix gcr offset

  dell-laptop:
   - Add keyboard backlight timeout AC settings
   - Handle return error form dell_get_intensity.
   - Protect kbd_state against races
   - Refactor kbd_led_triggers_store()

  hp-wireless:
   - reuse module_acpi_driver
   - add Xiaomi's hardware id to the supported list

  intel-vbtn:
   - add volume up and down

  INT33FE:
   - add i2c dependency

  hp-wmi:
   - Cleanup exit paths
   - Do not shadow errors in sysfs show functions
   - Use DEVICE_ATTR_(RO|RW) helper macros
   - Refactor dock and tablet state fetchers
   - Cleanup wireless get_(hw|sw)state functions
   - Refactor redundant HPWMI_READ functions
   - Standardize enum usage for constants
   - Cleanup local variable declarations
   - Do not shadow error values
   - Fix detection for dock and tablet mode
   - Fix error value for hp_wmi_tablet_state

  fujitsu-laptop:
   - simplify error handling in acpi_fujitsu_laptop_add()
   - do not log LED registration failures
   - switch to managed LED class devices
   - reorganize LED-related code
   - refactor LED registration
   - select LEDS_CLASS
   - remove redundant fields from struct fujitsu_bl
   - account for backlight power when determining brightness
   - do not log set_lcd_level() failures in bl_update_status()
   - ignore errors when setting backlight power
   - make disable_brightness_adjust a boolean
   - clean up use_alt_lcd_levels handling
   - sync brightness in set_lcd_level()
   - simplify set_lcd_level()
   - merge set_lcd_level_alt() into set_lcd_level()
   - switch to a managed backlight device
   - only handle backlight when appropriate
   - update debug message logged by call_fext_func()
   - rename call_fext_func() arguments
   - simplify call_fext_func()
   - clean up local variables in call_fext_func()
   - remove keycode fields from struct fujitsu_bl
   - model-dependent sparse keymap overrides
   - use a sparse keymap for hotkey event generation
   - switch to a managed hotkey input device
   - refactor hotkey input device setup
   - use a sparse keymap for brightness key events
   - switch to a managed backlight input device
   - refactor backlight input device setup
   - remove pf_device field from struct fujitsu_bl
   - only register platform device if FUJ02E3 is present
   - add and remove platform device in separate functions
   - simplify platform device attribute definitions
   - remove backlight-related attributes from the platform device
   - cleanup error labels in fujitsu_init()
   - only register backlight device if FUJ02B1 is present
   - sync backlight power status in acpi_fujitsu_laptop_add()
   - register backlight device in a separate function
   - simplify brightness key event generation logic
   - decrease indentation in acpi_fujitsu_bl_notify()

  intel-hid:
   - Add missing ->thaw callback
   - do not set parents of input devices explicitly
   - remove redundant set_bit() call
   - use devm_input_allocate_device() for HID events input device
   - make intel_hid_set_enable() take a boolean argument
   - simplify enabling/disabling HID events

  silead_dmi:
   - Add touchscreen info for Surftab Wintron 7.0
   - Abort early if DMI does not match
   - Do not treat all devices as i2c_clients
   - Add entry for Insyde 7W tablets
   - Constify properties arrays

  intel_scu_ipc:
   - Introduce intel_scu_ipc_raw_command()
   - Introduce SCU_DEVICE() macro
   - Remove redundant subarch check
   - Rearrange init sequence
   - Platform data is mandatory

  asus-nb-wmi:
   - Add wapf4 quirk for the X302UA

  dell-*:
   - Call new led hw_changed API on kbd brightness change
   - Add a generic dell-laptop notifier chain

  eeepc-laptop:
   - Skip unknown key messages 0x50 0x51

  thinkpad_acpi:
   - add mapping for new hotkeys
   - guard generic hotkey case"

* tag 'platform-drivers-x86-v4.12-1' of git://git.infradead.org/linux-platform-drivers-x86: (108 commits)
  platform/x86: Make SILEAD_DMI depend on TOUCHSCREEN_SILEAD
  platform/x86: asus-wmi: try to set als by default
  platform/x86: asus-wmi: fix cpufv sysfs file permission
  platform/x86: acer-wmi: setup accelerometer when ACPI device was found
  platform/x86: ideapad-laptop: Add IdeaPad V310-15ISK to no_hw_rfkill
  platform/x86: intel_pmc_ipc: use gcr mem base for S0ix counter read
  platform/x86: intel_pmc_ipc: Fix iTCO_wdt GCS memory mapping failure
  watchdog: iTCO_wdt: Add PMC specific noreboot update api
  watchdog: iTCO_wdt: cleanup set/unset no_reboot_bit functions
  platform/x86: intel_pmc_ipc: Add pmc gcr read/write/update api's
  platform/x86: intel_pmc_ipc: fix gcr offset
  platform/x86: dell-laptop: Add keyboard backlight timeout AC settings
  platform/x86: dell-laptop: Handle return error form dell_get_intensity.
  platform/x86: hp-wireless: reuse module_acpi_driver
  platform/x86: intel-vbtn: add volume up and down
  platform/x86: INT33FE: add i2c dependency
  platform/x86: hp-wmi: Cleanup exit paths
  platform/x86: hp-wmi: Do not shadow errors in sysfs show functions
  platform/x86: hp-wmi: Use DEVICE_ATTR_(RO|RW) helper macros
  platform/x86: hp-wmi: Refactor dock and tablet state fetchers
  ...

Pull VFIO updates from Alex Williamson:

 - Updates for SPAPR IOMMU backend including compatibility test and
   memory allocation check (Alexey Kardashevskiy)

 - Updates for type1 IOMMU backend to remove asynchronous locked page
   accounting and remove redundancy (Alex Williamson)

* tag 'vfio-v4.12-rc1' of git://github.com/awilliam/linux-vfio:
  vfio/type1: Reduce repetitive calls in vfio_pin_pages_remote()
  vfio/type1: Prune vfio_pin_page_external()
  vfio/type1: Remove locked page accounting workqueue
  vfio/spapr_tce: Check kzalloc() return when preregistering memory
  vfio/powerpc/spapr_tce: Enforce IOMMU type compatibility check

Pull xen updates from Juergen Gross:
 "Xen fixes and featrues for 4.12. The main changes are:

   - enable building the kernel with Xen support but without enabling
     paravirtualized mode (Vitaly Kuznetsov)

   - add a new 9pfs xen frontend driver (Stefano Stabellini)

   - simplify Xen's cpuid handling by making use of cpu capabilities
     (Juergen Gross)

   - add/modify some headers for new Xen paravirtualized devices
     (Oleksandr Andrushchenko)

   - EFI reset_system support under Xen (Julien Grall)

   - and the usual cleanups and corrections"

* tag 'for-linus-4.12b-rc0b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (57 commits)
  xen: Move xen_have_vector_callback definition to enlighten.c
  xen: Implement EFI reset_system callback
  arm/xen: Consolidate calls to shutdown hypercall in a single helper
  xen: Export xen_reboot
  xen/x86: Call xen_smp_intr_init_pv() on BSP
  xen: Revert commits da72ff5b and 72a9b186
  xen/pvh: Do not fill kernel's e820 map in init_pvh_bootparams()
  xen/scsifront: use offset_in_page() macro
  xen/arm,arm64: rename __generic_dma_ops to xen_get_dma_ops
  xen/arm,arm64: fix xen_dma_ops after 815dd187 "Consolidate get_dma_ops..."
  xen/9pfs: select CONFIG_XEN_XENBUS_FRONTEND
  x86/cpu: remove hypervisor specific set_cpu_features
  vmware: set cpu capabilities during platform initialization
  x86/xen: use capabilities instead of fake cpuid values for xsave
  x86/xen: use capabilities instead of fake cpuid values for x2apic
  x86/xen: use capabilities instead of fake cpuid values for mwait
  x86/xen: use capabilities instead of fake cpuid values for acpi
  x86/xen: use capabilities instead of fake cpuid values for acc
  x86/xen: use capabilities instead of fake cpuid values for mtrr
  x86/xen: use capabilities instead of fake cpuid values for aperf
  ...

Due to the way I did the RX bitrate conversions in mac80211 with
spatch, going setting flags to setting the value, many drivers now
don't set the bandwidth value for 20 MHz, since with the flags it
wasn't necessary to (there was no 20 MHz flag, only the others.)

Rather than go through and try to fix up all the drivers, instead
renumber the enum so that 20 MHz, which is the typical bandwidth,
actually has the value 0, making those drivers all work again.

If VHT was hit used with a driver not reporting it, e.g. iwlmvm,
this manifested in hitting the bandwidth warning in
cfg80211_calculate_bitrate_vht().
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Tested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Andrey reported a crash on init_net.ipv6.ip6_null_entry->rt6i_idev
since it is always NULL.

This is clearly wrong, we have code to initialize it to loopback_dev,
unfortunately the order is still not correct.

loopback_dev is registered very early during boot, we lose a chance
to re-initialize it in notifier. addrconf_init() is called after
ip6_route_init(), which means we have no chance to correct it.

Fix it by moving this initialization explicitly after
ipv6_add_dev(init_net.loopback_dev) in addrconf_init().
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sudarsana Reddy Kalluru says:

====================
qed*: Bug fix series.

The series contains minor bug fixes for qed/qede drivers.

Please consider applying it to 'net' branch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Fail the configuration of advertised speed-autoneg value if the config
update is not supported.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Driver currently uses advertised-autoneg value to populate the
supported-autoneg field. When advertised field is updated, user gets
the same value for supported field. Supported-autoneg value need to be
populated from the link capabilities value returned by the MFW.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Value for status block id could be more than 256 in 100G mode, need to
update its data type from u8 to u16.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

IFLA_PHYS_PORT_NAME is a string attribute, so terminate it with \0.
Otherwise libnl3 fails to validate netlink messages with this attribute.
"ip -detail a" assumes too that the attribute is NUL-terminated when
printing it. It often was, due to padding.

I noticed this as libvirtd failing to start on a system with sfc driver
after upgrading it to Linux 4.11, i.e. when sfc added support for
phys_port_name.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This fixes a race where vmbus callback for new packet arriving
could occur before NAPI is initialized.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

V2: using "aquantia" subsystem tag.

The command "ethtool -i ethX" should display driver name (driver: atlantic)
instead vendor name (driver: aquantia).
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

raw_send_hdrinc() and rawv6_send_hdrinc() expect that the buffer copied
from the userspace contains the IPv4/IPv6 header, so if too few bytes are
copied, parts of the header may remain uninitialized.

This bug has been detected with KMSAN.

For the record, the KMSAN report:

==================================================================
BUG: KMSAN: use of unitialized memory in nf_ct_frag6_gather+0xf5a/0x44a0
inter: 0
CPU: 0 PID: 1036 Comm: probe Not tainted 4.11.0-rc5+ #2455
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:16
 dump_stack+0x143/0x1b0 lib/dump_stack.c:52
 kmsan_report+0x16b/0x1e0 mm/kmsan/kmsan.c:1078
 __kmsan_warning_32+0x5c/0xa0 mm/kmsan/kmsan_instr.c:510
 nf_ct_frag6_gather+0xf5a/0x44a0 net/ipv6/netfilter/nf_conntrack_reasm.c:577
 ipv6_defrag+0x1d9/0x280 net/ipv6/netfilter/nf_defrag_ipv6_hooks.c:68
 nf_hook_entry_hookfn ./include/linux/netfilter.h:102
 nf_hook_slow+0x13f/0x3c0 net/netfilter/core.c:310
 nf_hook ./include/linux/netfilter.h:212
 NF_HOOK ./include/linux/netfilter.h:255
 rawv6_send_hdrinc net/ipv6/raw.c:673
 rawv6_sendmsg+0x2fcb/0x41a0 net/ipv6/raw.c:919
 inet_sendmsg+0x3f8/0x6d0 net/ipv4/af_inet.c:762
 sock_sendmsg_nosec net/socket.c:633
 sock_sendmsg net/socket.c:643
 SYSC_sendto+0x6a5/0x7c0 net/socket.c:1696
 SyS_sendto+0xbc/0xe0 net/socket.c:1664
 do_syscall_64+0x72/0xa0 arch/x86/entry/common.c:285
 entry_SYSCALL64_slow_path+0x25/0x25 arch/x86/entry/entry_64.S:246
RIP: 0033:0x436e03
RSP: 002b:00007ffce48baf38 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 00000000004002b0 RCX: 0000000000436e03
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003
RBP: 00007ffce48baf90 R08: 00007ffce48baf50 R09: 000000000000001c
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000401790 R14: 0000000000401820 R15: 0000000000000000
origin: 00000000d9400053
 save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:362
 kmsan_internal_poison_shadow+0xb1/0x1a0 mm/kmsan/kmsan.c:257
 kmsan_poison_shadow+0x6d/0xc0 mm/kmsan/kmsan.c:270
 slab_alloc_node mm/slub.c:2735
 __kmalloc_node_track_caller+0x1f4/0x390 mm/slub.c:4341
 __kmalloc_reserve net/core/skbuff.c:138
 __alloc_skb+0x2cd/0x740 net/core/skbuff.c:231
 alloc_skb ./include/linux/skbuff.h:933
 alloc_skb_with_frags+0x209/0xbc0 net/core/skbuff.c:4678
 sock_alloc_send_pskb+0x9ff/0xe00 net/core/sock.c:1903
 sock_alloc_send_skb+0xe4/0x100 net/core/sock.c:1920
 rawv6_send_hdrinc net/ipv6/raw.c:638
 rawv6_sendmsg+0x2918/0x41a0 net/ipv6/raw.c:919
 inet_sendmsg+0x3f8/0x6d0 net/ipv4/af_inet.c:762
 sock_sendmsg_nosec net/socket.c:633
 sock_sendmsg net/socket.c:643
 SYSC_sendto+0x6a5/0x7c0 net/socket.c:1696
 SyS_sendto+0xbc/0xe0 net/socket.c:1664
 do_syscall_64+0x72/0xa0 arch/x86/entry/common.c:285
 return_from_SYSCALL_64+0x0/0x6a arch/x86/entry/entry_64.S:246
==================================================================

, triggered by the following syscalls:
  socket(PF_INET6, SOCK_RAW, IPPROTO_RAW) = 3
  sendto(3, NULL, 0, 0, {sa_family=AF_INET6, sin6_port=htons(0), inet_pton(AF_INET6, "ff00::", &sin6_addr), sin6_flowinfo=0, sin6_scope_id=0}, 28) = -1 EPERM

A similar report is triggered in net/ipv4/raw.c if we use a PF_INET socket
instead of a PF_INET6 one.
Signed-off-by: Alexander Potapenko <glider@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

head is previously null checked and so the 2nd null check on head
is redundant and therefore can be removed.

Detected by CoverityScan, CID#1399505 ("Logically dead code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Under fuzzer stress, it is possible that a child gets a non NULL
fastopen_req pointer from its parent at accept() time, when/if parent
morphs from listener to active session.

We need to make sure this can not happen, by clearing the field after
socket cloning.

BUG: Double free or freeing an invalid pointer
Unexpected shadow byte: 0xFB
CPU: 3 PID: 20933 Comm: syz-executor3 Not tainted 4.11.0+ #306
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs
01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:16 [inline]
 dump_stack+0x292/0x395 lib/dump_stack.c:52
 kasan_object_err+0x1c/0x70 mm/kasan/report.c:164
 kasan_report_double_free+0x5c/0x70 mm/kasan/report.c:185
 kasan_slab_free+0x9d/0xc0 mm/kasan/kasan.c:580
 slab_free_hook mm/slub.c:1357 [inline]
 slab_free_freelist_hook mm/slub.c:1379 [inline]
 slab_free mm/slub.c:2961 [inline]
 kfree+0xe8/0x2b0 mm/slub.c:3882
 tcp_free_fastopen_req net/ipv4/tcp.c:1077 [inline]
 tcp_disconnect+0xc15/0x13e0 net/ipv4/tcp.c:2328
 inet_child_forget+0xb8/0x600 net/ipv4/inet_connection_sock.c:898
 inet_csk_reqsk_queue_add+0x1e7/0x250
net/ipv4/inet_connection_sock.c:928
 tcp_get_cookie_sock+0x21a/0x510 net/ipv4/syncookies.c:217
 cookie_v4_check+0x1a19/0x28b0 net/ipv4/syncookies.c:384
 tcp_v4_cookie_check net/ipv4/tcp_ipv4.c:1384 [inline]
 tcp_v4_do_rcv+0x731/0x940 net/ipv4/tcp_ipv4.c:1421
 tcp_v4_rcv+0x2dc0/0x31c0 net/ipv4/tcp_ipv4.c:1715
 ip_local_deliver_finish+0x4cc/0xc20 net/ipv4/ip_input.c:216
 NF_HOOK include/linux/netfilter.h:257 [inline]
 ip_local_deliver+0x1ce/0x700 net/ipv4/ip_input.c:257
 dst_input include/net/dst.h:492 [inline]
 ip_rcv_finish+0xb1d/0x20b0 net/ipv4/ip_input.c:396
 NF_HOOK include/linux/netfilter.h:257 [inline]
 ip_rcv+0xd8c/0x19c0 net/ipv4/ip_input.c:487
 __netif_receive_skb_core+0x1ad1/0x3400 net/core/dev.c:4210
 __netif_receive_skb+0x2a/0x1a0 net/core/dev.c:4248
 process_backlog+0xe5/0x6c0 net/core/dev.c:4868
 napi_poll net/core/dev.c:5270 [inline]
 net_rx_action+0xe70/0x18e0 net/core/dev.c:5335
 __do_softirq+0x2fb/0xb99 kernel/softirq.c:284
 do_softirq_own_stack+0x1c/0x30 arch/x86/entry/entry_64.S:899
 </IRQ>
 do_softirq.part.17+0x1e8/0x230 kernel/softirq.c:328
 do_softirq kernel/softirq.c:176 [inline]
 __local_bh_enable_ip+0x1cf/0x1e0 kernel/softirq.c:181
 local_bh_enable include/linux/bottom_half.h:31 [inline]
 rcu_read_unlock_bh include/linux/rcupdate.h:931 [inline]
 ip_finish_output2+0x9ab/0x15e0 net/ipv4/ip_output.c:230
 ip_finish_output+0xa35/0xdf0 net/ipv4/ip_output.c:316
 NF_HOOK_COND include/linux/netfilter.h:246 [inline]
 ip_output+0x1f6/0x7b0 net/ipv4/ip_output.c:404
 dst_output include/net/dst.h:486 [inline]
 ip_local_out+0x95/0x160 net/ipv4/ip_output.c:124
 ip_queue_xmit+0x9a8/0x1a10 net/ipv4/ip_output.c:503
 tcp_transmit_skb+0x1ade/0x3470 net/ipv4/tcp_output.c:1057
 tcp_write_xmit+0x79e/0x55b0 net/ipv4/tcp_output.c:2265
 __tcp_push_pending_frames+0xfa/0x3a0 net/ipv4/tcp_output.c:2450
 tcp_push+0x4ee/0x780 net/ipv4/tcp.c:683
 tcp_sendmsg+0x128d/0x39b0 net/ipv4/tcp.c:1342
 inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:762
 sock_sendmsg_nosec net/socket.c:633 [inline]
 sock_sendmsg+0xca/0x110 net/socket.c:643
 SYSC_sendto+0x660/0x810 net/socket.c:1696
 SyS_sendto+0x40/0x50 net/socket.c:1664
 entry_SYSCALL_64_fastpath+0x1f/0xbe
RIP: 0033:0x446059
RSP: 002b:00007faa6761fb58 EFLAGS: 00000282 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000000017 RCX: 0000000000446059
RDX: 0000000000000001 RSI: 0000000020ba3fcd RDI: 0000000000000017
RBP: 00000000006e40a0 R08: 0000000020ba4ff0 R09: 0000000000000010
R10: 0000000020000000 R11: 0000000000000282 R12: 0000000000708150
R13: 0000000000000000 R14: 00007faa676209c0 R15: 00007faa67620700
Object at ffff88003b5bbcb8, in cache kmalloc-64 size: 64
Allocated:
PID = 20909
 save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59
 save_stack+0x43/0xd0 mm/kasan/kasan.c:513
 set_track mm/kasan/kasan.c:525 [inline]
 kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:616
 kmem_cache_alloc_trace+0x82/0x270 mm/slub.c:2745
 kmalloc include/linux/slab.h:490 [inline]
 kzalloc include/linux/slab.h:663 [inline]
 tcp_sendmsg_fastopen net/ipv4/tcp.c:1094 [inline]
 tcp_sendmsg+0x221a/0x39b0 net/ipv4/tcp.c:1139
 inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:762
 sock_sendmsg_nosec net/socket.c:633 [inline]
 sock_sendmsg+0xca/0x110 net/socket.c:643
 SYSC_sendto+0x660/0x810 net/socket.c:1696
 SyS_sendto+0x40/0x50 net/socket.c:1664
 entry_SYSCALL_64_fastpath+0x1f/0xbe
Freed:
PID = 20909
 save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59
 save_stack+0x43/0xd0 mm/kasan/kasan.c:513
 set_track mm/kasan/kasan.c:525 [inline]
 kasan_slab_free+0x73/0xc0 mm/kasan/kasan.c:589
 slab_free_hook mm/slub.c:1357 [inline]
 slab_free_freelist_hook mm/slub.c:1379 [inline]
 slab_free mm/slub.c:2961 [inline]
 kfree+0xe8/0x2b0 mm/slub.c:3882
 tcp_free_fastopen_req net/ipv4/tcp.c:1077 [inline]
 tcp_disconnect+0xc15/0x13e0 net/ipv4/tcp.c:2328
 __inet_stream_connect+0x20c/0xf90 net/ipv4/af_inet.c:593
 tcp_sendmsg_fastopen net/ipv4/tcp.c:1111 [inline]
 tcp_sendmsg+0x23a8/0x39b0 net/ipv4/tcp.c:1139
 inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:762
 sock_sendmsg_nosec net/socket.c:633 [inline]
 sock_sendmsg+0xca/0x110 net/socket.c:643
 SYSC_sendto+0x660/0x810 net/socket.c:1696
 SyS_sendto+0x40/0x50 net/socket.c:1664
 entry_SYSCALL_64_fastpath+0x1f/0xbe

Fixes: e994b2f0 ("tcp: do not lock listener to process SYN packets")
Fixes: 7db92362 ("tcp: fix potential double free issue for fastopen_req")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since netif_carrier_on() will do nothing if device's
carrier is already on, so it's unnecessary to do
carrier status check.

It's the same for netif_carrier_off().
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull modules updates from Jessica Yu:

 - Minor code cleanups

 - Fix section alignment for .init_array

* tag 'modules-for-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
  kallsyms: Use bounded strnchr() when parsing string
  module: Unify the return value type of try_module_get
  module: set .init_array alignment to 8

Pull tracing updates from Steven Rostedt:
 "New features for this release:

   - Pretty much a full rewrite of the processing of function plugins.
     i.e. echo do_IRQ:stacktrace > set_ftrace_filter

   - The rewrite was needed to add plugins to be unique to tracing
     instances. i.e. mkdir instance/foo; cd instances/foo; echo
     do_IRQ:stacktrace > set_ftrace_filter The old way was written very
     hacky. This removes a lot of those hacks.

   - New "function-fork" tracing option. When set, pids in the
     set_ftrace_pid will have their children added when the processes
     with their pids listed in the set_ftrace_pid file forks.

   - Exposure of "maxactive" for kretprobe in kprobe_events

   - Allow for builtin init functions to be traced by the function
     tracer (via the kernel command line). Module init function tracing
     will come in the next release.

   - Added more selftests, and have selftests also test in an instance"

* tag 'trace-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (60 commits)
  ring-buffer: Return reader page back into existing ring buffer
  selftests: ftrace: Allow some event trigger tests to run in an instance
  selftests: ftrace: Have some basic tests run in a tracing instance too
  selftests: ftrace: Have event tests also run in an tracing instance
  selftests: ftrace: Make func_event_triggers and func_traceonoff_triggers tests do instances
  selftests: ftrace: Allow some tests to be run in a tracing instance
  tracing/ftrace: Allow for instances to trigger their own stacktrace probes
  tracing/ftrace: Allow for the traceonoff probe be unique to instances
  tracing/ftrace: Enable snapshot function trigger to work with instances
  tracing/ftrace: Allow instances to have their own function probes
  tracing/ftrace: Add a better way to pass data via the probe functions
  ftrace: Dynamically create the probe ftrace_ops for the trace_array
  tracing: Pass the trace_array into ftrace_probe_ops functions
  tracing: Have the trace_array hold the list of registered func probes
  ftrace: If the hash for a probe fails to update then free what was initialized
  ftrace: Have the function probes call their own function
  ftrace: Have each function probe use its own ftrace_ops
  ftrace: Have unregister_ftrace_function_probe_func() return a value
  ftrace: Add helper function ftrace_hash_move_and_update_ops()
  ftrace: Remove data field from ftrace_func_probe structure
  ...

Pull printk updates from Petr Mladek:

 - There is a situation when early console is not deregistered because
   the preferred one matches a wrong entry. It caused messages to appear
   twice.

   This is the 2nd attempt to fix it. The first one was wrong, see the
   commit c6c7d83b ('Revert "console: don't prefer first registered
   if DT specifies stdout-path"').

   The fix is coupled with some small code clean up. Well, the console
   registration code would deserve a big one. We need to think about it.

 - Do not lose information about the preemtive context when the console
   semaphore is re-taken.

 - Do not block CPU hotplug when someone else is already pushing
   messages to the console.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
  printk: fix double printing with earlycon
  printk: rename selected_console -> preferred_console
  printk: fix name/type/scope of preferred_console var
  printk: Correctly handle preemption in console_unlock()
  printk: use console_trylock() in console_cpu_notify()

Merge misc updates from Andrew Morton:

 - a few misc things

 - most of MM

 - KASAN updates

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (102 commits)
  kasan: separate report parts by empty lines
  kasan: improve double-free report format
  kasan: print page description after stacks
  kasan: improve slab object description
  kasan: change report header
  kasan: simplify address description logic
  kasan: change allocation and freeing stack traces headers
  kasan: unify report headers
  kasan: introduce helper functions for determining bug type
  mm: hwpoison: call shake_page() after try_to_unmap() for mlocked page
  mm: hwpoison: call shake_page() unconditionally
  mm/swapfile.c: fix swap space leak in error path of swap_free_entries()
  mm/gup.c: fix access_ok() argument type
  mm/truncate: avoid pointless cleancache_invalidate_inode() calls.
  mm/truncate: bail out early from invalidate_inode_pages2_range() if mapping is empty
  fs/block_dev: always invalidate cleancache in invalidate_bdev()
  fs: fix data invalidation in the cleancache during direct IO
  zram: reduce load operation in page_same_filled
  zram: use zram_free_page instead of open-coded
  zram: introduce zram data accessor
  ...

Makes the report easier to read.

Link: http://lkml.kernel.org/r/20170302134851.101218-10-andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Changes double-free report header from

  BUG: Double free or freeing an invalid pointer
  Unexpected shadow byte: 0xFB

to

  BUG: KASAN: double-free or invalid-free in kmalloc_oob_left+0xe5/0xef

This makes a bug uniquely identifiable by the first report line.  To
account for removing of the unexpected shadow value, print shadow bytes
at the end of the report as in reports for other kinds of bugs.

Link: http://lkml.kernel.org/r/20170302134851.101218-9-andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Moves page description after the stacks since it's less important.

Link: http://lkml.kernel.org/r/20170302134851.101218-8-andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Changes slab object description from:

  Object at ffff880068388540, in cache kmalloc-128 size: 128

to:

  The buggy address belongs to the object at ffff880068388540
   which belongs to the cache kmalloc-128 of size 128
  The buggy address is located 123 bytes inside of
   128-byte region [ffff880068388540, ffff8800683885c0)

Makes it more explanatory and adds information about relative offset of
the accessed address to the start of the object.

Link: http://lkml.kernel.org/r/20170302134851.101218-7-andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Change report header format from:

  BUG: KASAN: use-after-free in unwind_get_return_address+0x28a/0x2c0 at addr ffff880069437950
  Read of size 8 by task insmod/3925

to:

  BUG: KASAN: use-after-free in unwind_get_return_address+0x28a/0x2c0
  Read of size 8 at addr ffff880069437950 by task insmod/3925

The exact access address is not usually important, so move it to the
second line.  This also makes the header look visually balanced.

Link: http://lkml.kernel.org/r/20170302134851.101218-6-andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Simplify logic for describing a memory address.  Add addr_to_page()
helper function.

Makes the code easier to follow.

Link: http://lkml.kernel.org/r/20170302134851.101218-5-andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>