- 27 Aug, 2011 2 commits
-
-
Jarod Wilson authored
Sometimes the init routine is blasting commands out to the hardware faster than it can reply. Throw a brief delay in there to give the hardware a chance to reply before we send the next command. Signed-off-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Jarod Wilson authored
I was recently pointed to the document titled Windows-Media-Center-RC-IR-Collection-Green-Button-Specification-03-08-2011-V2.pdf which as of this writing, is publicly available from download.microsoft.com. It covers a LOT of the gaps in the mceusb driver, which to this point, was written almost entirely by reverse-engineering. First up, I'm updating the defines for all the MCE commands and responses to match their names in the spec. More to come... Signed-off-by:
-
- 07 Aug, 2011 2 commits
-
-
Jose Alberto Reguero authored
tda827x is currently taking the demod IF frequency into account while seeking for the proper tuner range. This is wrong, as the demod IF frequency has nothing to do with the tuner PLL. Signed-off-by:
Jose Alberto Reguero <jareguero@telefonica.net> Signed-off-by:
-
Luiz Ramos authored
Hello, When migrating from Slackware 13.1 to 13.37 (kernel 2.6.33.x to 2.6.37.6), there was some sort of regression with the external webcam installed at the notebook (0x45:6128, SN9C325+OM6802). In the version 2.6.37.6, the images got *very* dark, making the webcam almost unusable, unless if used with direct sunlight. Tracing back what happened, I concluded that changeset 0e4d413a caused some sort of odd effects - including this - to this specific model. Signed-off-by:
Luiz Carlos Ramos <lramos.prof@yahoo.com.br> Acked-by:
Jean-François Moine <moinejf@free.fr> Signed-off-by:
-
- 06 Aug, 2011 9 commits
-
-
Jarod Wilson authored
There are folks with flaky imon hardware out there that doesn't always respond to requests to write to their displays for some reason, which can flood logs quickly when something like lcdproc is trying to constantly update the display, so lets rate-limit all that error spew. Signed-off-by:
-
Ming Lei authored
If the bus has been reset on resume, set the alternate setting to 0. This should be the default value, but some devices crash or otherwise misbehave if they don't receive a SET_INTERFACE request before any other video control request. Microdia's 0c45:6437 camera has been found to require this change or it will stop sending video data after resume. uvc_video.c] Signed-off-by:
Ming Lei <ming.lei@canonical.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: stable@kernel.org Signed-off-by:
-
Mauro Carvalho Chehab authored
This device is not using the proper demod IF. Instead of using the IF macro, it is specifying a IF frequency. This doesn't work, as xc3028 needs to load an specific SCODE for the tuner. In this case, there's no IF table for 5 MHz. Cc: stable@kernel.org Signed-off-by: -
Sakari Ailus authored
Move documentation of structures used in DQEVENT from SUBSCRIBE_EVENT to DQEVENT. Signed-off-by:
Sakari Ailus <sakari.ailus@iki.fi> Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Andy Shevchenko authored
Potentially the adp1653_init_controls could return an error. In our case the error was ignored, meanwhile it means incorrect initialization of V4L2 controls. Additionally we have to free control handler structures in case of apd1653_init_controls or media_entity_init failure. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by:
-
Andy Shevchenko authored
The driver requires platform_data to be present. That's why we need to check and fail in case of the absence of necessary data. Signed-off-by:
-
Olivier Grenie authored
The goal of this patch is to correct a previous patch. In case of error, the err() function should be used instead of dprintk() function. [mchehab@redhat.com: as I've replaced dprintk by deb_info, on the the previous patch, to avoid breaking bisect, I had to fix a merge conflict on this one] Signed-off-by:
Olivier Grenie <olivier.grenie@dibcom.fr> Signed-off-by:
-
Olivier Grenie authored
This patch protects the common buffer access inside the dib0700 in order to manage concurrent access. This protection is done using mutex. Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Florian Mickler <florian@mickler.org> Cc: stable@kernel.org Signed-off-by:
Javier Marcet <javier@marcet.info> Signed-off-by:
Patrick Boettcher <patrick.boettcher@dibcom.fr> [mchehab@redhat.com: dprint requires 3 arguments. Replaced by dib_info] Signed-off-by:
-
Patrick Boettcher authored
This patch protects the I2C buffer access in order to manage concurrent access. This protection is done using mutex. Furthermore, for the dib9000, if a pid filtering command is received during the tuning, this pid filtering command is delayed to avoid any concurrent access issue. Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Florian Mickler <florian@mickler.org> Cc: stable@kernel.org Signed-off-by:
-
- 31 Jul, 2011 11 commits
-
-
Mauro Carvalho Chehab authored
Whan an ioctl is implemented, but the parameters are invalid, the error code should be -EINVAL. However, if the ioctl is not defined, it should return -ENOTTY instead. Reported-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
Change adapter FE pointer as array of FE pointers. Signed-off-by:
-
Mauro Carvalho Chehab authored
The input stop() callback already calls the em28xx_ir_stop method. Calling it again causes an oops. Acked-by:
-
Mauro Carvalho Chehab authored
rc unregister logic were deadly broken, preventing some drivers to be removed. Among the broken things, rc_dev_uevent() is being called during device_del(), causing a data filling on an area that it is not ready anymore. Also, some drivers have a stop callback defined, that needs to be called before data removal, as it stops data polling. Acked-by:
-
Erik Andrén authored
Signed-off-by:
Erik Andrén <erik.andren@gmail.com> Signed-off-by:
-
Erik Andrén authored
Signed-off-by:
-
Erik Andrén authored
No functional changes on this patch. Signed-off-by:
-
Erik Andrén authored
Signed-off-by:
-
Erik Andrén authored
Signed-off-by:
-
- 30 Jul, 2011 13 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6Linus Torvalds authored
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (430 commits) [media] ir-mce_kbd-decoder: include module.h for its facilities [media] ov5642: include module.h for its facilities [media] em28xx: Fix DVB-C maxsize for em2884 [media] tda18271c2dd: Fix saw filter configuration for DVB-C @6MHz [media] v4l: mt9v032: Fix Bayer pattern [media] V4L: mt9m111: rewrite set_pixfmt [media] V4L: mt9m111: fix missing return value check mt9m111_reg_clear [media] V4L: initial driver for ov5642 CMOS sensor [media] V4L: sh_mobile_ceu_camera: fix Oops when USERPTR mapping fails [media] V4L: soc-camera: remove soc-camera bus and devices on it [media] V4L: soc-camera: un-export the soc-camera bus [media] V4L: sh_mobile_csi2: switch away from using the soc-camera bus notifier [media] V4L: add media bus configuration subdev operations [media] V4L: soc-camera: group struct field initialisations together [media] V4L: soc-camera: remove now unused soc-camera specific PM hooks [media] V4L: pxa-camera: switch to using standard PM hooks [media] NetUP Dual DVB-T/C CI RF: force card hardware revision by module param [media] Don't OOPS if videobuf_dvb_get_frontend return NULL [media] NetUP Dual DVB-T/C CI RF: load firmware according card revision [media] omap3isp: Support configurable HS/VS polarities ... Fix up conflicts: - arch/arm/mach-omap2/board-rx51-peripherals.c: cleanup regulator supply definitions in mach-omap2 vs OMAP3: RX-51: define vdds_csib regulator supply - drivers/staging/tm6000/tm6000-alsa.c (trivial)
-
git://oss.sgi.com/xfs/xfsLinus Torvalds authored
* 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: Fix build breakage in xfs_iops.c when CONFIG_FS_POSIX_ACL is not set
-
git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6Linus Torvalds authored
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6: ecryptfs: Make inode bdi consistent with superblock bdi eCryptfs: Unlock keys needed by ecryptfsd
-
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xenLinus Torvalds authored
* 'stable/bug.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/balloon: Fix compile errors - missing header files. xen/grant: Fix compile warning. xen/pciback: remove duplicated #include
-
Greg Dietsche authored
remove unnecessary code that matches this coccinelle pattern if (...) return ret; return ret; Signed-off-by:
Greg Dietsche <Gregory.Dietsche@cuw.edu> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
James Bottomley authored
Fixes this: drivers/char/ramoops.c: In function 'ramoops_init': drivers/char/ramoops.c:221: error: implicit declaration of function 'IS_ERR' drivers/char/ramoops.c:222: error: implicit declaration of function 'PTR_ERR' If it actually builds on other platforms, it's probably getting linux/err.h via some other #include. Signed-off-by:
James Bottomley <JBottomley@Parallels.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6Linus Torvalds authored
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: remove printks about disabled bridge windows PCI: fold pci_calc_resource_flags() into decode_bar() PCI: treat mem BAR type "11" (reserved) as 32-bit, not 64-bit, BAR PCI: correct pcie_set_readrq write size PCI: pciehp: change wait time for valid configuration access x86/PCI: Preserve existing pci=bfsort whitelist for Dell systems PCI: ARI is a PCIe v2 feature x86/PCI: quirks: Use pci_dev->revision PCI: Make the struct pci_dev * argument of pci_fixup_irqs const. PCI hotplug: cpqphp: use pci_dev->vendor PCI hotplug: cpqphp: use pci_dev->subsystem_{vendor|device} x86/PCI: config space accessor functions should not ignore the segment argument PCI: Assign values to 'pci_obff_signal_type' enumeration constants x86/PCI: reduce severity of host bridge window conflict warnings PCI: enumerate the PCI device only removed out PCI hieratchy of OS when re-scanning PCI PCI: PCIe AER: add aer_recover_queue x86/PCI: select direct access mode for mmconfig option PCI hotplug: Rename is_ejectable which also exists in dock.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xenLinus Torvalds authored
* 'upstream/xen-tracing2' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: xen/tracing: fix compile errors when tracing is disabled.
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-socLinus Torvalds authored
* 'at91/cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: at91: add arch specific ioremap support at91: factorize sram init at91: move register clocks to soc generic init at91: move clock subsystem init to soc generic init at91: use structure to store the current soc at91: remove AT91_DBGU offset from dbgu register macro at91: factorize at91 interrupts init to soc at91: introduce commom AT91_BASE_SYS
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-socLinus Torvalds authored
* 'next/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (21 commits) arm/dt: tegra devicetree support arm/versatile: Add device tree support dt/irq: add irq_domain_generate_simple() helper irq: add irq_domain translation infrastructure dmaengine: imx-sdma: add device tree probe support dmaengine: imx-sdma: sdma_get_firmware does not need to copy fw_name dmaengine: imx-sdma: use platform_device_id to identify sdma version mmc: sdhci-esdhc-imx: add device tree probe support mmc: sdhci-pltfm: dt device does not pass parent to sdhci_alloc_host mmc: sdhci-esdhc-imx: get rid of the uses of cpu_is_mx() mmc: sdhci-esdhc-imx: do not reference platform data after probe mmc: sdhci-esdhc-imx: extend card_detect and write_protect support for mx5 net/fec: add device tree probe support net: ibm_newemac: convert it to use of_get_phy_mode dt/net: add helper function of_get_phy_mode net/fec: gasket needs to be enabled for some i.mx serial/imx: add device tree probe support serial/imx: get rid of the uses of cpu_is_mx1() arm/dt: Add dtb make rule arm/dt: Add skeleton dtsi file ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-socLinus Torvalds authored
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: ARM: zynq: remove incorrectly deleted file ARM: tegra: only select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC
-
git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-watchdogLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-watchdog: (25 commits) watchdog: WatchDog Timer Driver Core - Add minimum and max timeout watchdog: WatchDog Timer Driver Core - Add ioctl call watchdog: WatchDog Timer Driver Core - Add nowayout feature watchdog: WatchDog Timer Driver Core - Add Magic Close feature watchdog: WatchDog Timer Driver Core - Add WDIOC_SETTIMEOUT and WDIOC_GETTIMEOUT ioctl watchdog: WatchDog Timer Driver Core - Add WDIOC_SETOPTIONS ioctl watchdog: WatchDog Timer Driver Core - Add WDIOC_KEEPALIVE ioctl watchdog: WatchDog Timer Driver Core - Add basic ioctl functionality watchdog: WatchDog Timer Driver Core - Add basic framework watchdog: hpwdt: add next gen HP servers watchdog: it8712f_wdt.c: improve includes watchdog: at91sam9/wdt: move register header to drivers watchdog: Add Xilinx watchdog timer driver watchdog: remove empty pm-functions watchdog: sp805: Flush posted writes in enable/disable. watchdog: sp805: Don't write 0 to the load value register. watchdog: imx2_wdt: add device tree probe support watchdog: s3c2410: Add support for device tree based probe watchdog: mpcore_wdt: Add suspend/resume support. watchdog: mtx1-wdt: use dev_{err,info} instead of printk() ...
-
Linus Torvalds authored
When commit 4e34e719 ("fs: take the ACL checks to common code") changed the xyz_check_acl() functions into the more natural xyz_get_acl() interface, we grew two copies of the #define ext2_get_acl NULL define for the non-acl case. Remove the extra one. Reported-by:
Marco Stornelli <marco.stornelli@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
- 29 Jul, 2011 3 commits
-
-
Markus Trippelsdorf authored
commit 4e34e719, that takes the ACL checks to common code, accidentely broke the build when CONFIG_FS_POSIX_ACL is not set: CC fs/xfs/linux-2.6/xfs_iops.o fs/xfs/linux-2.6/xfs_iops.c:1025:14: error: ‘xfs_get_acl’ undeclared here (not in a function) Fix this by declaring xfs_get_acl a static inline function. Signed-off-by:
Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by:
Alex Elder <aelder@sgi.com>
-
Stephen Rothwell authored
drivers/media/rc/ir-mce_kbd-decoder.c:446:16: error: expected declaration specifiers or '...' before string constant drivers/media/rc/ir-mce_kbd-decoder.c:446:1: warning: data definition has no type or storage class drivers/media/rc/ir-mce_kbd-decoder.c:446:1: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE' drivers/media/rc/ir-mce_kbd-decoder.c:446:16: warning: function declaration isn't a prototype drivers/media/rc/ir-mce_kbd-decoder.c:447:15: error: expected declaration specifiers or '...' before string constant drivers/media/rc/ir-mce_kbd-decoder.c:447:1: warning: data definition has no type or storage class drivers/media/rc/ir-mce_kbd-decoder.c:447:1: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' drivers/media/rc/ir-mce_kbd-decoder.c:447:15: warning: function declaration isn't a prototype drivers/media/rc/ir-mce_kbd-decoder.c:448:20: error: expected declaration specifiers or '...' before string constant drivers/media/rc/ir-mce_kbd-decoder.c:448:1: warning: data definition has no type or storage class drivers/media/rc/ir-mce_kbd-decoder.c:448:1: warning: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION' drivers/media/rc/ir-mce_kbd-decoder.c:448:20: warning: function declaration isn't a prototype Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Stephen Rothwell authored
drivers/media/video/ov5642.c:985:1: warning: data definition has no type or storage class drivers/media/video/ov5642.c:985:1: warning: type defaults to 'int' in declaration of 'MODULE_DEVICE_TABLE' drivers/media/video/ov5642.c:985:1: warning: parameter names (without types) in function declaration drivers/media/video/ov5642.c: In function 'ov5642_mod_init': drivers/media/video/ov5642.c:998:9: error: 'THIS_MODULE' undeclared (first use in this function) drivers/media/video/ov5642.c:998:9: note: each undeclared identifier is reported only once for each function it appears in drivers/media/video/ov5642.c: At top level: drivers/media/video/ov5642.c:1009:20: error: expected declaration specifiers or '...' before string constant drivers/media/video/ov5642.c:1009:1: warning: data definition has no type or storage class drivers/media/video/ov5642.c:1009:1: warning: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION' drivers/media/video/ov5642.c:1009:20: warning: function declaration isn't a prototype drivers/media/video/ov5642.c:1010:15: error: expected declaration specifiers or '...' before string constant drivers/media/video/ov5642.c:1010:1: warning: data definition has no type or storage class drivers/media/video/ov5642.c:1010:1: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' drivers/media/video/ov5642.c:1010:15: warning: function declaration isn't a prototype drivers/media/video/ov5642.c:1011:16: error: expected declaration specifiers or '...' before string constant drivers/media/video/ov5642.c:1011:1: warning: data definition has no type or storage class drivers/media/video/ov5642.c:1011:1: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE' drivers/media/video/ov5642.c:1011:16: warning: function declaration isn't a prototype drivers/media/video/ov5642.c: In function 'ov5642_mod_init': drivers/media/video/ov5642.c:999:1: warning: control reaches end of non-void function Signed-off-by:
-
