- 23 Mar, 2023 4 commits
-
-
Krzysztof Kozlowski authored
The WSA881x shutdown GPIO is active low (SD_N), but Linux driver assumed DTS always comes with active high. Since Linux drivers were updated to handle proper flag, correct the DTS. The change is not backwards compatible with older Linux kernel. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230322193051.826167-5-krzysztof.kozlowski@linaro.org
-
Krzysztof Kozlowski authored
The WSA881x shutdown GPIO is active low (SD_N), but Linux driver assumed DTS always comes with active high. Since Linux drivers were updated to handle proper flag, correct the DTS. The change is not backwards compatible with older Linux kernel. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230322193051.826167-4-krzysztof.kozlowski@linaro.org
-
Krzysztof Kozlowski authored
The WSA881x shutdown GPIO is active low (SD_N), but Linux driver assumed DTS always comes with active high. Since Linux drivers were updated to handle proper flag, correct the DTS. The change is not backwards compatible with older Linux kernel. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230322193051.826167-3-krzysztof.kozlowski@linaro.org
-
Krzysztof Kozlowski authored
The WSA881x shutdown GPIO is active low (SD_N), but Linux driver assumed DTS always comes with active high. Since Linux drivers were updated to handle proper flag, correct the DTS. The change is not backwards compatible with older Linux kernel. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230322193051.826167-2-krzysztof.kozlowski@linaro.org
-
- 22 Mar, 2023 4 commits
-
-
Johan Hovold authored
The bob supply is used by several pmic regulators and components which are not (yet fully) described in the devicetree. Mark the regulator as always-on for now. Fixes: f29077d8 ("arm64: dts: qcom: sc8280xp-x13s: Add soundcard support") Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230322113318.17908-5-johan+linaro@kernel.org
-
Johan Hovold authored
The s12b supply is used by several pmic regulators as well as the wlan/bluetooth radio which are not yet fully described in the devicetree. Mark the regulator as always-on for now. Fixes: f29077d8 ("arm64: dts: qcom: sc8280xp-x13s: Add soundcard support") Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230322113318.17908-4-johan+linaro@kernel.org
-
Johan Hovold authored
The s10b supply is used by several components that are not (yet) described in devicetree (e.g. ram, charger, ec) and must not be disabled. Mark the regulator as always-on. Fixes: f29077d8 ("arm64: dts: qcom: sc8280xp-x13s: Add soundcard support") Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230322113318.17908-3-johan+linaro@kernel.org
-
Johan Hovold authored
The s11b supply is used by the wlan module (as well as some of the pmics) which are not yet fully described in the devicetree. Mark the regulator as always-on for now. Fixes: 123b30a7 ("arm64: dts: qcom: sc8280xp-x13s: enable WiFi controller") Cc: stable@vger.kernel.org # 6.2 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230322113318.17908-2-johan+linaro@kernel.org
-
- 09 Mar, 2023 10 commits
-
-
Manivannan Sadhasivam authored
The UFS controller on SM8550 supports cache coherency, hence add the "dma-coherent" property to mark it as such. Fixes: 35cf1aaa ("arm64: dts: qcom: sm8550: Add UFS host controller and phy nodes") Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230308054630.7202-1-manivannan.sadhasivam@linaro.org
-
Brian Masney authored
The cdsp.mbn firmware that's referenced in sa8540p-ride.dts is actually named cdsp0.mbn in the deliverables from Qualcomm. Let's go ahead and correct the name to match what's in Qualcomm's deliverable. Signed-off-by: Brian Masney <bmasney@redhat.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230307232340.2370476-1-bmasney@redhat.com
-
Manivannan Sadhasivam authored
The UFS controller on SM8450 supports cache coherency, hence add the "dma-coherent" property to mark it as such. Fixes: 07fa917a ("arm64: dts: qcom: sm8450: add ufs nodes") Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230307153201.180626-2-manivannan.sadhasivam@linaro.org
-
Manivannan Sadhasivam authored
The UFS controller on SM8350 supports cache coherency, hence add the "dma-coherent" property to mark it as such. Fixes: 59c7cf81 ("arm64: dts: qcom: sm8350: Add UFS nodes") Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230307153201.180626-1-manivannan.sadhasivam@linaro.org
-
Krzysztof Kozlowski authored
The second LPASS pin controller IO address is supposed to be the MCC range which contains the slew rate registers. The Linux driver then accesses slew rate register with hard-coded offset (0xa000). However the DTS contained the address of slew rate register as the second IO address, thus any reads were effectively pass the memory space and lead to "Internal error: synchronous external aborts" when applying pin configuration. Fixes: 6de7f9c3 ("arm64: dts: qcom: sm8550: add GPR and LPASS pin controller") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230302154724.856062-1-krzysztof.kozlowski@linaro.org
-
Srinivas Kandagatla authored
VA dmics 0, 1, 2 micbias on X13s are connected to WCD MICBIAS1, WCD MICBIAS1 and WCD MICBIAS3 respectively. Reflect this in dt to get dmics working. Also fix dmics to go via VA Macro instead of TX macro to fix device switching. Fixes: 8c1ea87e80b4 ("arm64: dts: qcom: sc8280xp-x13s: Add soundcard support") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230302115741.7726-5-srinivas.kandagatla@linaro.org
-
Srinivas Kandagatla authored
The version of dmic that is on X13s panel supports clock frequency of range 1 Mhz to 4.8 MHz for normal operation. So correct the existing node to reflect this. Fixes: 8c1ea87e80b4 ("arm64: dts: qcom: sc8280xp-x13s: Add soundcard support") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230302115741.7726-4-srinivas.kandagatla@linaro.org
-
Srinivas Kandagatla authored
Tx macro soundwire clock is for some reason is incorrectly assigned to va macro, fix this and use tx macro clock instead. Fixes: 1749a8ae49a3 ("arm64: dts: qcom: sc8280xp: add SoundWire and LPASS") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230302115741.7726-3-srinivas.kandagatla@linaro.org
-
Srinivas Kandagatla authored
Some of the SoundWire frameshapping data seems incorrect, fix these values. Fixes: 1749a8ae49a3 ("arm64: dts: qcom: sc8280xp: add SoundWire and LPASS") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230302115741.7726-2-srinivas.kandagatla@linaro.org
-
Krzysztof Kozlowski authored
The WSA2 assigned-clocks were copied from WSA, but the WSA2 uses its own. Fixes: 14341e76 ("arm64: dts: qcom: sm8450: add Soundwire and LPASS") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230308123129.232642-1-krzysztof.kozlowski@linaro.org
-
- 07 Mar, 2023 2 commits
-
-
Krishna chaitanya chundru authored
If the controller is not marked as cache coherent, then kernel will try to ensure coherency during dma-ops and that may cause data corruption. So, mark the PCIe node as dma-coherent as the devices on PCIe bus are cache coherent. Cc: stable@vger.kernel.org Fixes: 92e0ee9f ("arm64: dts: qcom: sc7280: Add PCIe and PHY related node") Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/1677584952-17496-1-git-send-email-quic_krichai@quicinc.com
-
Yang Xiwen authored
The previous commit mistakenly introduced sim_ctrl_default as pinctrl, this is incorrect, the interface for sim card selection varies between different devices and should not be placed in the dtsi. This commit selects external SIM card slot for ufi001c as default. uf896 selects the correct SIM card slot automatically, thus does not need this pinctrl node. Fixes: faf69431 ("arm64: dts: qcom: msm8916-thwc: Add initial device trees") Signed-off-by: Yang Xiwen <forbidden405@foxmail.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/tencent_7036BCA256055D05F8C49D86DF7F0E2D1A05@qq.com
-
- 06 Mar, 2023 7 commits
-
-
Jianhua Lu authored
Missing vendor name for venus firmware path. Add it. Fixes: a41b6175 ("arm64: dts: qcom: sm8250: Add device tree for Xiaomi Mi Pad 5 Pro") Signed-off-by: Jianhua Lu <lujianhua000@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230221123633.25145-1-lujianhua000@gmail.com
-
Konrad Dybcio authored
Use the correct compatibles for the four kinds of CPU cores used on SM8550, based on the value of their MIDR_EL1 registers: CPU7: 0x411fd4e0 - CX3 r1p1 CPU5-6: 0x412fd470 - CA710 r?p? CPU3-4: 0x411fd4d0 - CA715 r?p? CPU0-2: 0x411fd461 - CA510 r?p? Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230216110803.3945747-2-konrad.dybcio@linaro.org
-
Abel Vesa authored
The default bias pull up value for the tlmm i2c data clk states is 2.2kOhms. Add this value to make sure the driver factors in the i2c pull up bit when writing the config register. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230209074510.4153294-2-abel.vesa@linaro.org
-
Konrad Dybcio authored
This was omitted when first introducing the node. Fix it. Fixes: fe6fd26a ("arm64: dts: qcom: sm6375: Add ADSP&CDSP") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230109135647.339224-5-konrad.dybcio@linaro.org
-
Konrad Dybcio authored
The commit mentioned in the fixes tag erroneously enabled SPI5 unconditionally. Undo it. Fixes: 25aab0b8 ("arm64: dts: qcom: sm6115: Add geni debug uart node for qup0") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230216124921.3985834-1-konrad.dybcio@linaro.org
-
Manivannan Sadhasivam authored
For uniquely identifying the vadc channels, label property has to be used. The initial commit adding vadc support assumed that the driver will use the unit address along with the node name to identify the channels. But this assumption is now broken by, commit 701c875a ("iio: adc: qcom-spmi-adc5: Fix the channel name") that stripped unit address from channel names. This results in probe failure of the vadc driver: [ 8.380370] iio iio:device0: tried to double register : in_temp_pmic-die-temp_input [ 8.380383] qcom-spmi-adc5 c440000.spmi:pmic@0:adc@3100: Failed to register sysfs interfaces [ 8.380386] qcom-spmi-adc5: probe of c440000.spmi:pmic@0:adc@3100 failed with error -16 Hence, let's get rid of the assumption about drivers and rely on label property to uniquely identify the channels. The labels are derived from the schematics for each PMIC. For internal adc channels such as die and xo, the PMIC names are used as a prefix. Fixes: 7c015134 ("arm64: dts: qcom: sc8280xp-x13s: Add PM8280_{1/2} ADC_TM5 channels") Fixes: 9d41cd17 ("arm64: dts: qcom: sc8280xp-x13s: Add PMR735A VADC channel") Fixes: 3375151a ("arm64: dts: qcom: sc8280xp-x13s: Add PM8280_{1/2} VADC channels") Fixes: 9a6b3042 ("arm64: dts: qcom: sc8280xp-x13s: Add PMK8280 VADC channels") Reported-by: Steev Klimaszewski <steev@kali.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230211052415.14581-1-manivannan.sadhasivam@linaro.org
-
Manivannan Sadhasivam authored
The iommu mask should be 0x3f as per Qualcomm internal documentation. Without the correct mask, the PCIe transactions from the endpoint will result in SMMU faults. Hence, fix it! Cc: stable@vger.kernel.org # 5.19 Fixes: a1c86c68 ("arm64: dts: qcom: sm8150: Add PCIe nodes") Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230224080045.6577-1-manivannan.sadhasivam@linaro.org
-
- 05 Mar, 2023 9 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Commit aa47a7c2 ("lib/cpumask: deprecate nr_cpumask_bits") resulted in the cpumask operations potentially becoming hugely less efficient, because suddenly the cpumask was always considered to be variable-sized. The optimization was then later added back in a limited form by commit 6f9c07be ("lib/cpumask: add FORCE_NR_CPUS config option"), but that FORCE_NR_CPUS option is not useful in a generic kernel and more of a special case for embedded situations with fixed hardware. Instead, just re-introduce the optimization, with some changes. Instead of depending on CPUMASK_OFFSTACK being false, and then always using the full constant cpumask width, this introduces three different cpumask "sizes": - the exact size (nr_cpumask_bits) remains identical to nr_cpu_ids. This is used for situations where we should use the exact size. - the "small" size (small_cpumask_bits) is the NR_CPUS constant if it fits in a single word and the bitmap operations thus end up able to trigger the "small_const_nbits()" optimizations. This is used for the operations that have optimized single-word cases that get inlined, notably the bit find and scanning functions. - the "large" size (large_cpumask_bits) is the NR_CPUS constant if it is an sufficiently small constant that makes simple "copy" and "clear" operations more efficient. This is arbitrarily set at four words or less. As a an example of this situation, without this fixed size optimization, cpumask_clear() will generate code like movl nr_cpu_ids(%rip), %edx addq $63, %rdx shrq $3, %rdx andl $-8, %edx callq memset@PLT on x86-64, because it would calculate the "exact" number of longwords that need to be cleared. In contrast, with this patch, using a MAX_CPU of 64 (which is quite a reasonable value to use), the above becomes a single movq $0,cpumask instruction instead, because instead of caring to figure out exactly how many CPU's the system has, it just knows that the cpumask will be a single word and can just clear it all. Note that this does end up tightening the rules a bit from the original version in another way: operations that set bits in the cpumask are now limited to the actual nr_cpu_ids limit, whereas we used to do the nr_cpumask_bits thing almost everywhere in the cpumask code. But if you just clear bits, or scan for bits, we can use the simpler compile-time constants. In the process, remove 'cpumask_complement()' and 'for_each_cpu_not()' which were not useful, and which fundamentally have to be limited to 'nr_cpu_ids'. Better remove them now than have somebody introduce use of them later. Of course, on x86-64 with MAXSMP there is no sane small compile-time constant for the cpumask sizes, and we end up using the actual CPU bits, and will generate the above kind of horrors regardless. Please don't use MAXSMP unless you really expect to have machines with thousands of cores. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fix from Herbert Xu: "Fix a regression in the caam driver" * tag 'v6.3-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: caam - Fix edesc/iv ordering mixup
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 updates from Thomas Gleixner: "A small set of updates for x86: - Return -EIO instead of success when the certificate buffer for SEV guests is not large enough - Allow STIPB to be enabled with legacy IBSR. Legacy IBRS is cleared on return to userspace for performance reasons, but the leaves user space vulnerable to cross-thread attacks which STIBP prevents. Update the documentation accordingly" * tag 'x86-urgent-2023-03-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: virt/sev-guest: Return -EIO if certificate buffer is not large enough Documentation/hw-vuln: Document the interaction between IBRS and STIBP x86/speculation: Allow enabling STIBP with legacy IBRS
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq updates from Thomas Gleixner: "A set of updates for the interrupt susbsystem: - Prevent possible NULL pointer derefences in irq_data_get_affinity_mask() and irq_domain_create_hierarchy() - Take the per device MSI lock before invoking code which relies on it being hold - Make sure that MSI descriptors are unreferenced before freeing them. This was overlooked when the platform MSI code was converted to use core infrastructure and results in a fals positive warning - Remove dead code in the MSI subsystem - Clarify the documentation for pci_msix_free_irq() - More kobj_type constification" * tag 'irq-urgent-2023-03-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/msi, platform-msi: Ensure that MSI descriptors are unreferenced genirq/msi: Drop dead domain name assignment irqdomain: Add missing NULL pointer check in irq_domain_create_hierarchy() genirq/irqdesc: Make kobj_type structures constant PCI/MSI: Clarify usage of pci_msix_free_irq() genirq/msi: Take the per-device MSI lock before validating the control structure genirq/ipi: Fix NULL pointer deref in irq_data_get_affinity_mask()
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs update from Al Viro: "Adding Christian Brauner as VFS co-maintainer" * tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: Adding VFS co-maintainer
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull VM_FAULT_RETRY fixes from Al Viro: "Some of the page fault handlers do not deal with the following case correctly: - handle_mm_fault() has returned VM_FAULT_RETRY - there is a pending fatal signal - fault had happened in kernel mode Correct action in such case is not "return unconditionally" - fatal signals are handled only upon return to userland and something like copy_to_user() would end up retrying the faulting instruction and triggering the same fault again and again. What we need to do in such case is to make the caller to treat that as failed uaccess attempt - handle exception if there is an exception handler for faulting instruction or oops if there isn't one. Over the years some architectures had been fixed and now are handling that case properly; some still do not. This series should fix the remaining ones. Status: - m68k, riscv, hexagon, parisc: tested/acked by maintainers. - alpha, sparc32, sparc64: tested locally - bug has been reproduced on the unpatched kernel and verified to be fixed by this series. - ia64, microblaze, nios2, openrisc: build, but otherwise completely untested" * tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: openrisc: fix livelock in uaccess nios2: fix livelock in uaccess microblaze: fix livelock in uaccess ia64: fix livelock in uaccess sparc: fix livelock in uaccess alpha: fix livelock in uaccess parisc: fix livelock in uaccess hexagon: fix livelock in uaccess riscv: fix livelock in uaccess m68k: fix livelock in uaccess
-
Masahiro Yamada authored
include/linux/compiler-intel.h had no update in the past 3 years. We often forget about the third C compiler to build the kernel. For example, commit a0a12c3e ("asm goto: eradicate CC_HAS_ASM_GOTO") only mentioned GCC and Clang. init/Kconfig defines CC_IS_GCC and CC_IS_CLANG but not CC_IS_ICC, and nobody has reported any issue. I guess the Intel Compiler support is broken, and nobody is caring about it. Harald Arnesen pointed out ICC (classic Intel C/C++ compiler) is deprecated: $ icc -v icc: remark #10441: The Intel(R) C++ Compiler Classic (ICC) is deprecated and will be removed from product release in the second half of 2023. The Intel(R) oneAPI DPC++/C++ Compiler (ICX) is the recommended compiler moving forward. Please transition to use this compiler. Use '-diag-disable=10441' to disable this message. icc version 2021.7.0 (gcc version 12.1.0 compatibility) Arnd Bergmann provided a link to the article, "Intel C/C++ compilers complete adoption of LLVM". lib/zstd/common/compiler.h and lib/zstd/compress/zstd_fast.c were kept untouched for better sync with https://github.com/facebook/zstd Link: https://www.intel.com/content/www/us/en/developer/articles/technical/adoption-of-llvm-complete-icx.htmlSigned-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Al Viro authored
Acked-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
- 04 Mar, 2023 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull more i2c updates from Wolfram Sang: "Some improvements/fixes for the newly added GXP driver and a Kconfig dependency fix" * tag 'i2c-for-6.3-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: gxp: fix an error code in probe i2c: gxp: return proper error on address NACK i2c: gxp: remove "empty" switch statement i2c: Disable I2C_APPLE when I2C_PASEMI is a builtin
-
Linus Torvalds authored
The migration code ends up temporarily stashing information of the wrong type in unused fields of the newly allocated destination folio. That all works fine, but gcc does complain about the pointer type mis-use: mm/migrate.c: In function ‘__migrate_folio_extract’: mm/migrate.c:1050:20: note: randstruct: casting between randomized structure pointer types (ssa): ‘struct anon_vma’ and ‘struct address_space’ 1050 | *anon_vmap = (void *)dst->mapping; | ~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~ and gcc is actually right to complain since it really doesn't understand that this is a very temporary special case where this is ok. This could be fixed in different ways by just obfuscating the assignment sufficiently that gcc doesn't see what is going on, but the truly "proper C" way to do this is by explicitly using a union. Using unions for type conversions like this is normally hugely ugly and syntactically nasty, but this really is one of the few cases where we want to make it clear that we're not doing type conversion, we're really re-using the value bit-for-bit just using another type. IOW, this should not become a common pattern, but in this one case using that odd union is probably the best way to document to the compiler what is conceptually going on here. [ Side note: there are valid cases where we convert pointers to other pointer types, notably the whole "folio vs page" situation, where the types actually have fundamental commonalities. The fact that the gcc note is limited to just randomized structures means that we don't see equivalent warnings for those cases, but it migth also mean that we miss other cases where we do play these kinds of dodgy games, and this kind of explicit conversion might be a good idea. ] I verified that at least for an allmodconfig build on x86-64, this generates the exact same code, apart from line numbers and assembler comment changes. Fixes: 64c8902e ("migrate_pages: split unmap_and_move() to _unmap() and _move()") Cc: Huang, Ying <ying.huang@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge tag 'mm-hotfixes-stable-2023-03-04-13-12' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "17 hotfixes. Eight are for MM and seven are for other parts of the kernel. Seven are cc:stable and eight address post-6.3 issues or were judged unsuitable for -stable backporting" * tag 'mm-hotfixes-stable-2023-03-04-13-12' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mailmap: map Dikshita Agarwal's old address to his current one mailmap: map Vikash Garodia's old address to his current one fs/cramfs/inode.c: initialize file_ra_state fs: hfsplus: fix UAF issue in hfsplus_put_super panic: fix the panic_print NMI backtrace setting lib: parser: update documentation for match_NUMBER functions kasan, x86: don't rename memintrinsics in uninstrumented files kasan: test: fix test for new meminstrinsic instrumentation kasan: treat meminstrinsic as builtins in uninstrumented files kasan: emit different calls for instrumentable memintrinsics ocfs2: fix non-auto defrag path not working issue ocfs2: fix defrag path triggering jbd2 ASSERT mailmap: map Georgi Djakov's old Linaro address to his current one mm/hwpoison: convert TTU_IGNORE_HWPOISON to TTU_HWPOISON lib/zlib: DFLTCC deflate does not write all available bits for Z_NO_FLUSH mm/damon/paddr: fix missing folio_put() mm/mremap: fix dup_anon_vma() in vma_merge() case 4
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Drop orphaned VAS MAINTAINERS entry - Fix build errors with clang and KCSAN - Avoid build errors seen with LD_DEAD_CODE_DATA_ELIMINATION together with recordmcount Thanks to Nathan Chancellor. * tag 'powerpc-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: Avoid dead code/data elimination when using recordmcount powerpc/vmlinux.lds: Add .text.asan/tsan sections powerpc: Drop orphaned VAS MAINTAINERS entry
-