- 26 Nov, 2015 40 commits
-
-
Ondrej Zary authored
Move 870-specific init code to a separate function atp870_init() Signed-off-by:
Ondrej Zary <linux@rainbow-software.org> Reviewed-by:
Hannes Reinicke <hare@suse.de> Acked-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Ondrej Zary authored
Move 885-specific init code to a separate function atp885_init() Signed-off-by:
-
Ondrej Zary authored
Move 880-specific init code to a separate function atp880_init() Signed-off-by:
-
Ondrej Zary authored
Call _init_tables before chip-specific initialization. This avoids code duplication and fixes a bug(?) in 880 init where the values read from flash into atpdev->sp are then overwritten by calling init_tables. Signed-off-by:
-
Ondrej Zary authored
scam_on is used only during probe, no need to keep it later. Signed-off-by:
-
Ondrej Zary authored
Allocate IRQ later during probe to avoid code duplication and also remove the need for weird locking in _probe. (It was probably there to prevent race with the IRQ handler?) Signed-off-by:
-
Ondrej Zary authored
Use pci_request_regions and do it before accessing the I/O ports. Also add missing pci_disable_device() call to atp870u_remove(). Signed-off-by:
-
Ondrej Zary authored
Introduce chip type inline functions to simplify code, allowing to delete dev_id from struct atp_unit. Signed-off-by:
-
Ondrej Zary authored
Move shpnt common code to the top, remove base_io, use pci_resource_len. Signed-off-by:
-
Ondrej Zary authored
chip_ver is used for wide chip detection only. Remove it and use a local variable instead (for 870; 880 and 885 are always wide). Signed-off-by:
-
Ondrej Zary authored
Signed-off-by:
-
Ondrej Zary authored
Move scsi_host_alloc() to the top of _probe() to remove code duplication, *p and unneeded atpdev (de)allocation and copying. While at it, fix the error paths to return real error codes and also add missing pci_disble_device() call. Signed-off-by:
-
Ondrej Zary authored
Signed-off-by:
-
Ondrej Zary authored
Signed-off-by:
-
Ondrej Zary authored
Signed-off-by:
-
Ondrej Zary authored
Signed-off-by:
-
Ondrej Zary authored
tscam_885() is empty (except a delay) so remove it. Signed-off-by:
-
Ondrej Zary authored
Signed-off-by:
-
Ondrej Zary authored
The code for setting host adapter ID is the same for all chips. Move it to a common function. Signed-off-by:
-
Ondrej Zary authored
The ioport region is 0x20 bytes long so accessing 0x3a register using writeb_io is incorrect. Use writeb_base instead. There's no change in behavior as 870 chips have ioport = baseport. Signed-off-by:
-
Ondrej Zary authored
tscam() is using port 0x80 access for delays but that's x86-only. Use udelay(2) instead. Signed-off-by:
-
Ondrej Zary authored
Signed-off-by:
-
Ondrej Zary authored
Now that all the is* functions except is885() are gone, rename is885() to atp_is() to avoid confusion. Don't know what "is" means, though... Signed-off-by:
-
Ondrej Zary authored
Now that is885() supports everything from is870() and the rest of the code is almost identical, remove is870() and use is885() instead. Signed-off-by:
-
Ondrej Zary authored
Move few remaining 870-specific code lines out of is870() Signed-off-by:
-
Ondrej Zary authored
Add remaining 870 support to is885(): - different synw, no synuw - synu[4] = 0x0c - atp_writeb_io(dev, c, 0x04, 0x00); instead of atp_writeb_io(dev, c, 0x14, 0x00); (isn't that a bug?) - atp_writeb_io(dev, c, 0x14, 0xff); instead of atp_writeb_io(dev, c, 0x14, 0x06); - different mbuf[3] and mbuf[4] checks Signed-off-by:
-
Ondrej Zary authored
Don't check chip_ver in is870() but add wide_chip parameter for that. Then add the non-wide support to is885(). Signed-off-by:
-
Ondrej Zary authored
Now that is880() and is885() are almost identical (except for some cpu_relax() calls and debug printks), remove is880() and use is885() instead. Signed-off-by:
-
Ondrej Zary authored
Move few chip-specifis lines out of is880() and is885() so they become almost identical. Signed-off-by:
-
Ondrej Zary authored
Add channel parameter to is870() and is880() functions to simplify comparing them with is885(). Signed-off-by:
-
Ondrej Zary authored
Unify code formatting in is870(), is880() and is885() functions to simplify comparing them. Signed-off-by:
-
Ondrej Zary authored
Signed-off-by:
-
Ondrej Zary authored
Subtract 0x40 to use _io access wrappers. Now it's obvious that is870() and is880() are very similar. Signed-off-by:
-
Ondrej Zary authored
Signed-off-by:
-
Ondrej Zary authored
Introduce *_read? and *_write? wrappers to improve code readability. Also make sure that baseport is always initialized, not only for ATP880. Signed-off-by:
-
Ondrej Zary authored
Signed-off-by:
-
Ondrej Zary authored
Signed-off-by:
-
Ondrej Zary authored
Signed-off-by:
-
Ondrej Zary authored
Signed-off-by:
-
Ondrej Zary authored
Signed-off-by:
-
