Add DT binding document for the Ilitek ILI210x and ILI251x
touchscreen controllers.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This patch adds a new vibrator driver that supports various Qualcomm
MSM SOCs. Driver was tested on a LG Nexus 5 (hammerhead) phone.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

On some platforms (e.g.: ARCH_BRCMSTB) it is possible to enter
"poweroff" while leaving some wake-up sources enabled such as key
presses in order to allow for the system to wake-up.

Wire up a .shutdown() callback which calls into the existing
gpio_keys_suspend() since the logic is essentially the same.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

We should rely on the interrupt trigger (level vs edge) set up by the
firmware or board code instead of forcing what we consider appropriate.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Some of the #defined register values are one-bit flags. Convert them to
use the BIT(x) macro instead of 1 byte hexadecimal values. This improves
readability and clarifies the intent.
Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

of_touchscreen.c provides a common interface for a axis inversion and
swapping of touchscreens. Therefore use it in the sx8654 driver.
Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The sx8654 and sx8650 are quite similar, therefore add support for the
sx8650 within the sx8654 driver.
Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Reviewed-by: Rob Herring <robh@kernel.org>
[dtor: use __be16 in sx8650_irq, add missing del_timer_sync]
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

As the sx865[456] share the same datasheet and differ only in the
presence of a "capacitive proximity detection circuit" and a "haptics
motor driver for LRA/ERM" add them to the compatbiles. As the driver
doesn't implement these features it should be no problem.
Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The sx8654 features a NRST input which may be connected to a GPIO.
Therefore add support for hard-resetting the sx8654 via this NRST.

If the reset-gpio property is provided the sx8654 is resetted via NRST
instead of the soft-reset via I2C.
Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This adds myself as an author of the st1232 driver module as Tony's
email address doesn't seem to work anymore.
Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Add support for the Sitronix ST1633 touchscreen controller to the st1232
driver. A protocol spec can be found here:
www.ampdisplay.com/documents/pdf/AM-320480B6TZQW-TC0H.pdf
Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Unfortunately the evervision focaltech implementation uses two offset
registers, one for the x coordinate and one for y.

This patch extends the driver to handle those offset registers only for
devices that support these.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Currently only the threshold and gain parameters can be read.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Evervision displays are using different Focaltech touchscreen
controllers. This commit adds the initial support for the ones using the
FT5726 controller. Receiving the touch data is the same as for the
GENERIC_FT but the x and y cooridnates are swapped. The main differences
are the register addresses where the GAIN and THRESHOLD parameters are
stored.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

iSOrt includes in alphabetical order and remove duplicated include file
linux/kernel.h
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

One of the more common cases of allocation size calculations is finding the
size of a structure that has a zero-sized array at the end, along with memory
for some number of elements for that array. For example:

struct foo {
    int stuff;
    void *entry[];
};

instance = kzalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL);

Instead of leaving these open-coded and prone to type mistakes, we can now
use the new struct_size() helper:

instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL);

This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

One of the more common cases of allocation size calculations is finding the
size of a structure that has a zero-sized array at the end, along with
memory for some number of elements for that array. For example:

struct foo {
    int stuff;
    void *entry[];
};

instance = kzalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL);

Instead of leaving these open-coded and prone to type mistakes, we can now
use the new struct_size() helper:

instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL);

This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Merge with mainline to bring in the new APIs.

regmap_bulk_read() can return a non zero value on failure. The fix checks
if the function call succeeded before calling mod_timer. The issue was
identified by a static analysis tool.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The touchkey variant found on aries board is slighty different,
it uses a fixed regulator and writes/read to the same place
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Not all devices use the same keycodes in the same order,
so add possibility to define keycodes for buttons present
on actual hardware.

If keycodes property is not present, we assume that device has
at least MENU and BACK keys.
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

tm2-touchkey doesn't have brightness levels, but only on/off states,
so replace LED_FULL with LED_ON.
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The touchkey on midas boards is almost identical.
The only real difference is that it uses the same register for both
keycode and base.
Signed-off-by: Simon Shields <simon@lineageos.org>
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The Microsoft documenation for the PNP0C40 device aka the
"Windows-compatible button array" describes the 5th GpioInt listed in
the resources as: '5. Interrupt corresponding to the "Rotation Lock"
button, if supported'.

Notice this describes the 5th entry as a button while we sofar have been
mapping it to EV_SW, SW_ROTATE_LOCK. On my Point of View TAB P1006W-232
which actually comes with a rotation-lock button, the button indeed is a
button and not a slider/switch. An image search for other Windows tablets
has found 2 more models with a rotation-lock button and on both of those
it too is a push-button and not a slider/switch.

Further evidence can be found in the HUT extension HUTRR52 from Microsoft
which adds rotation lock support to the HUT, which describes 2 different
usages: "0xC9 System Display Rotation Lock Button" and
"0xCA System Display Rotation Lock Slider Switch" note that switch is seen
as a separate thing here and the non switch wording is an exact match for
the "Windows-compatible button array" spec wording.

TL;DR: our current mapping of the 5th GPIO to SW_ROTATE_LOCK is wrong
because the 5th GPIO is for a push-button not a switch.

This commit fixes this by maping the 5th GPIO to KEY_ROTATE_LOCK_TOGGLE.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The ACPI0011 _DSD button descriptor on a CHT based Intel Compute Sticks
contains a mapping for usage-page 0x01 usage-id 0xca.

As described in hutrr52_system_display_rotation_lock_controls_0.pdf this
should be mapped as a "System Display Rotation Lock Slider Switch", this
commit adds support for this, silencing the following warning:

soc_button_array ACPI0011:00: Unknown button index 4 upage 01 usage ca,
ignoring
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

If the user attempts to update Atmel device with an invalid configuration
cfg file, error handling code is trying to free cfg file memory which is
not allocated yet hence results into kernel crash.

This patch fixes the order of memory free operations.
Signed-off-by: Sanjeev Chugh <sanjeev_chugh@mentor.com>
Fixes: a4891f10 ("Input: atmel_mxt_ts - zero terminate config firmware file")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Pull vfs fixes from Al Viro:
 "A couple of fixes - no common topic ;-)"

[ The aio spectre patch also came in from Jens, so now we have that
  doubly fixed .. ]

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  proc/sysctl: don't return ENOMEM on lookup when a table is unregistering
  aio: fix spectre gadget in lookup_ioctx

Pull SCSI fixes from James Bottomley:
 "This is two simple target fixes and one discard related I/O starvation
  problem in sd.

  The discard problem occurs because the discard page doesn't have a
  mempool backing so if the allocation fails due to memory pressure, we
  then lose the forward progress we require if the writeout is on the
  same device. The fix is to back it with a mempool"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: sd: use mempool for discard special page
  scsi: target: iscsi: cxgbit: add missing spin_lock_init()
  scsi: target: iscsi: cxgbit: fix csk leak

Pull compiler_types.h fix from Miguel Ojeda:
 "A cleanup for userspace in compiler_types.h: don't pollute userspace
  with macro definitions (Xiaozhou Liu)

  This is harmless for the kernel, but v4.19 was released with a few
  macros exposed to userspace as the patch explains; which this removes,
  so it *could* happen that we break something for someone (although
  leaving inline redefined is probably worse)"

* tag 'compiler-attributes-for-linus-v4.20' of https://github.com/ojeda/linux:
  include/linux/compiler_types.h: don't pollute userspace with macro definitions

Pull auxdisplay fix from Miguel Ojeda:
 "charlcd: fix x/y command parsing (Mans Rullgard)"

* tag 'auxdisplay-for-linus-v4.20' of https://github.com/ojeda/linux:
  auxdisplay: charlcd: fix x/y command parsing

This reverts commit 55956b59.

commit 55956b59 ("vfs: Allow userns root to call mknod on owned filesystems.")
enabled mknod() in user namespaces for userns root if CAP_MKNOD is
available. However, these device nodes are useless since any filesystem
mounted from a non-initial user namespace will set the SB_I_NODEV flag on
the filesystem. Now, when a device node s created in a non-initial user
namespace a call to open() on said device node will fail due to:

bool may_open_dev(const struct path *path)
{
        return !(path->mnt->mnt_flags & MNT_NODEV) &&
                !(path->mnt->mnt_sb->s_iflags & SB_I_NODEV);
}

The problem with this is that as of the aforementioned commit mknod()
creates partially functional device nodes in non-initial user namespaces.
In particular, it has the consequence that as of the aforementioned commit
open() will be more privileged with respect to device nodes than mknod().
Before it was the other way around. Specifically, if mknod() succeeded
then it was transparent for any userspace application that a fatal error
must have occured when open() failed.

All of this breaks multiple userspace workloads and a widespread assumption
about how to handle mknod(). Basically, all container runtimes and systemd
live by the slogan "ask for forgiveness not permission" when running user
namespace workloads. For mknod() the assumption is that if the syscall
succeeds the device nodes are useable irrespective of whether it succeeds
in a non-initial user namespace or not. This logic was chosen explicitly
to allow for the glorious day when mknod() will actually be able to create
fully functional device nodes in user namespaces.
A specific problem people are already running into when running 4.18 rc
kernels are failing systemd services. For any distro that is run in a
container systemd services started with the PrivateDevices= property set
will fail to start since the device nodes in question cannot be
opened (cf. the arguments in [1]).

Full disclosure, Seth made the very sound argument that it is already
possible to end up with partially functional device nodes. Any filesystem
mounted with MS_NODEV set will allow mknod() to succeed but will not allow
open() to succeed. The difference to the case here is that the MS_NODEV
case is transparent to userspace since it is an explicitly set mount option
while the SB_I_NODEV case is an implicit property enforced by the kernel
and hence opaque to userspace.

[1]: https://github.com/systemd/systemd/pull/9483Signed-off-by: Christian Brauner <christian@brauner.io>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Seth Forshee <seth.forshee@canonical.com>
Cc: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We really need the writecombine flag in dma_alloc_wc, fix a stupid
oversight.

Fixes: 7ed1d91a ("dma-mapping: translate __GFP_NOFAIL to DMA_ATTR_NO_WARN")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There are some statements that are indented incorrectly, fix this by
removing the extra tabs.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Merge misc fixes from Andrew Morton:
 "4 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm, page_alloc: fix has_unmovable_pages for HugePages
  fork,memcg: fix crash in free_thread_stack on memcg charge fail
  mm: thp: fix flags for pmd migration when split
  mm, memory_hotplug: initialize struct pages for the full memory section

While playing with gigantic hugepages and memory_hotplug, I triggered
the following #PF when "cat memoryX/removable":

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
  #PF error: [normal kernel read fault]
  PGD 0 P4D 0
  Oops: 0000 [#1] SMP PTI
  CPU: 1 PID: 1481 Comm: cat Tainted: G            E     4.20.0-rc6-mm1-1-default+ #18
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
  RIP: 0010:has_unmovable_pages+0x154/0x210
  Call Trace:
   is_mem_section_removable+0x7d/0x100
   removable_show+0x90/0xb0
   dev_attr_show+0x1c/0x50
   sysfs_kf_seq_show+0xca/0x1b0
   seq_read+0x133/0x380
   __vfs_read+0x26/0x180
   vfs_read+0x89/0x140
   ksys_read+0x42/0x90
   do_syscall_64+0x5b/0x180
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

The reason is we do not pass the Head to page_hstate(), and so, the call
to compound_order() in page_hstate() returns 0, so we end up checking
all hstates's size to match PAGE_SIZE.

Obviously, we do not find any hstate matching that size, and we return
NULL.  Then, we dereference that NULL pointer in
hugepage_migration_supported() and we got the #PF from above.

Fix that by getting the head page before calling page_hstate().

Also, since gigantic pages span several pageblocks, re-adjust the logic
for skipping pages.  While are it, we can also get rid of the
round_up().

[osalvador@suse.de: remove round_up(), adjust skip pages logic per Michal]
  Link: http://lkml.kernel.org/r/20181221062809.31771-1-osalvador@suse.de
Link: http://lkml.kernel.org/r/20181217225113.17864-1-osalvador@suse.deSigned-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 9b6f7e16 ("mm: rework memcg kernel stack accounting") will
result in fork failing if allocating a kernel stack for a task in
dup_task_struct exceeds the kernel memory allowance for that cgroup.

Unfortunately, it also results in a crash.

This is due to the code jumping to free_stack and calling
free_thread_stack when the memcg kernel stack charge fails, but without
tsk->stack pointing at the freshly allocated stack.

This in turn results in the vfree_atomic in free_thread_stack oopsing
with a backtrace like this:

#5 [ffffc900244efc88] die at ffffffff8101f0ab
 #6 [ffffc900244efcb8] do_general_protection at ffffffff8101cb86
 #7 [ffffc900244efce0] general_protection at ffffffff818ff082
    [exception RIP: llist_add_batch+7]
    RIP: ffffffff8150d487  RSP: ffffc900244efd98  RFLAGS: 00010282
    RAX: 0000000000000000  RBX: ffff88085ef55980  RCX: 0000000000000000
    RDX: ffff88085ef55980  RSI: 343834343531203a  RDI: 343834343531203a
    RBP: ffffc900244efd98   R8: 0000000000000001   R9: ffff8808578c3600
    R10: 0000000000000000  R11: 0000000000000001  R12: ffff88029f6c21c0
    R13: 0000000000000286  R14: ffff880147759b00  R15: 0000000000000000
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 #8 [ffffc900244efda0] vfree_atomic at ffffffff811df2c7
 #9 [ffffc900244efdb8] copy_process at ffffffff81086e37
#10 [ffffc900244efe98] _do_fork at ffffffff810884e0
#11 [ffffc900244eff10] sys_vfork at ffffffff810887ff
#12 [ffffc900244eff20] do_syscall_64 at ffffffff81002a43
    RIP: 000000000049b948  RSP: 00007ffcdb307830  RFLAGS: 00000246
    RAX: ffffffffffffffda  RBX: 0000000000896030  RCX: 000000000049b948
    RDX: 0000000000000000  RSI: 00007ffcdb307790  RDI: 00000000005d7421
    RBP: 000000000067370f   R8: 00007ffcdb3077b0   R9: 000000000001ed00
    R10: 0000000000000008  R11: 0000000000000246  R12: 0000000000000040
    R13: 000000000000000f  R14: 0000000000000000  R15: 000000000088d018
    ORIG_RAX: 000000000000003a  CS: 0033  SS: 002b

The simplest fix is to assign tsk->stack right where it is allocated.

Link: http://lkml.kernel.org/r/20181214231726.7ee4843c@imladris.surriel.com
Fixes: 9b6f7e16 ("mm: rework memcg kernel stack accounting")
Signed-off-by: Rik van Riel <riel@surriel.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When splitting a huge migrating PMD, we'll transfer all the existing PMD
bits and apply them again onto the small PTEs.  However we are fetching
the bits unconditionally via pmd_soft_dirty(), pmd_write() or
pmd_yound() while actually they don't make sense at all when it's a
migration entry.  Fix them up.  Since at it, drop the ifdef together as
not needed.

Note that if my understanding is correct about the problem then if
without the patch there is chance to lose some of the dirty bits in the
migrating pmd pages (on x86_64 we're fetching bit 11 which is part of
swap offset instead of bit 2) and it could potentially corrupt the
memory of an userspace program which depends on the dirty bit.

Link: http://lkml.kernel.org/r/20181213051510.20306-1-peterx@redhat.comSigned-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: <stable@vger.kernel.org>	[4.14+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If memory end is not aligned with the sparse memory section boundary,
the mapping of such a section is only partly initialized.  This may lead
to VM_BUG_ON due to uninitialized struct page access from
is_mem_section_removable() or test_pages_in_a_zone() function triggered
by memory_hotplug sysfs handlers:

Here are the the panic examples:
 CONFIG_DEBUG_VM=y
 CONFIG_DEBUG_VM_PGFLAGS=y

 kernel parameter mem=2050M
 --------------------------
 page:000003d082008000 is uninitialized and poisoned
 page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p))
 Call Trace:
 ( test_pages_in_a_zone+0xde/0x160)
   show_valid_zones+0x5c/0x190
   dev_attr_show+0x34/0x70
   sysfs_kf_seq_show+0xc8/0x148
   seq_read+0x204/0x480
   __vfs_read+0x32/0x178
   vfs_read+0x82/0x138
   ksys_read+0x5a/0xb0
   system_call+0xdc/0x2d8
 Last Breaking-Event-Address:
   test_pages_in_a_zone+0xde/0x160
 Kernel panic - not syncing: Fatal exception: panic_on_oops

 kernel parameter mem=3075M
 --------------------------
 page:000003d08300c000 is uninitialized and poisoned
 page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p))
 Call Trace:
 ( is_mem_section_removable+0xb4/0x190)
   show_mem_removable+0x9a/0xd8
   dev_attr_show+0x34/0x70
   sysfs_kf_seq_show+0xc8/0x148
   seq_read+0x204/0x480
   __vfs_read+0x32/0x178
   vfs_read+0x82/0x138
   ksys_read+0x5a/0xb0
   system_call+0xdc/0x2d8
 Last Breaking-Event-Address:
   is_mem_section_removable+0xb4/0x190
 Kernel panic - not syncing: Fatal exception: panic_on_oops

Fix the problem by initializing the last memory section of each zone in
memmap_init_zone() till the very end, even if it goes beyond the zone end.

Michal said:

: This has alwways been problem AFAIU.  It just went unnoticed because we
: have zeroed memmaps during allocation before f7f99100 ("mm: stop
: zeroing memory during allocation in vmemmap") and so the above test
: would simply skip these ranges as belonging to zone 0 or provided a
: garbage.
:
: So I guess we do care for post f7f99100 kernels mostly and
: therefore Fixes: f7f99100 ("mm: stop zeroing memory during
: allocation in vmemmap")

Link: http://lkml.kernel.org/r/20181212172712.34019-2-zaslonko@linux.ibm.com
Fixes: f7f99100 ("mm: stop zeroing memory during allocation in vmemmap")
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Suggested-by: Michal Hocko <mhocko@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull sparc fixes from David Miller:
 "Just some small fixes here and there, and a refcount leak in a serial
  driver, nothing serious"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  serial/sunsu: fix refcount leak
  sparc: Set "ARCH: sunxx" information on the same line
  sparc: vdso: Drop implicit common-page-size linker flag