An error occurred fetching the project authors.
- 01 Apr, 2019 40 commits
-
-
Michal Hocko authored
BugLink: https://bugs.launchpad.net/bugs/1822271 [ Upstream commit efad4e47 ] Patch series "mm, memory_hotplug: fix uninitialized pages fallouts", v2. Mikhail Zaslonko has posted fixes for the two bugs quite some time ago [1]. I have pushed back on those fixes because I believed that it is much better to plug the problem at the initialization time rather than play whack-a-mole all over the hotplug code and find all the places which expect the full memory section to be initialized. We have ended up with commit 2830bf6f ("mm, memory_hotplug: initialize struct pages for the full memory section") merged and cause a regression [2][3]. The reason is that there might be memory layouts when two NUMA nodes share the same memory section so the merged fix is simply incorrect. In order to plug this hole we really have to be zone range aware in those handlers. I have split up the original patch into two. One is unchanged (patch 2) and I took a different approach for `removable' crash. [1] http://lkml.kernel.org/r/20181105150401.97287-2-zaslonko@linux.ibm.com [2] https://bugzilla.redhat.com/show_bug.cgi?id=1666948 [3] http://lkml.kernel.org/r/20190125163938.GA20411@dhcp22.suse.cz This patch (of 2): Mikhail has reported the following VM_BUG_ON triggered when reading sysfs removable state of a memory block: page:000003d08300c000 is uninitialized and poisoned page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p)) Call Trace: is_mem_section_removable+0xb4/0x190 show_mem_removable+0x9a/0xd8 dev_attr_show+0x34/0x70 sysfs_kf_seq_show+0xc8/0x148 seq_read+0x204/0x480 __vfs_read+0x32/0x178 vfs_read+0x82/0x138 ksys_read+0x5a/0xb0 system_call+0xdc/0x2d8 Last Breaking-Event-Address: is_mem_section_removable+0xb4/0x190 Kernel panic - not syncing: Fatal exception: panic_on_oops The reason is that the memory block spans the zone boundary and we are stumbling over an unitialized struct page. Fix this by enforcing zone range in is_mem_section_removable so that we never run away from a zone. Link: http://lkml.kernel.org/r/20190128144506.15603-2-mhocko@kernel.orgSigned-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Mikhail Zaslonko <zaslonko@linux.ibm.com> Debugged-by: Mikhail Zaslonko <zaslonko@linux.ibm.com> Tested-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Juerg Haefliger <juerg.haefliger@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Qian Cai authored
BugLink: https://bugs.launchpad.net/bugs/1822271 [ Upstream commit a8e911d1 ] If the kernel is configured with KASAN_EXTRA, the stack size is increasted significantly because this option sets "-fstack-reuse" to "none" in GCC [1]. As a result, it triggers stack overrun quite often with 32k stack size compiled using GCC 8. For example, this reproducer https://github.com/linux-test-project/ltp/blob/master/testcases/kernel/syscalls/madvise/madvise06.c triggers a "corrupted stack end detected inside scheduler" very reliably with CONFIG_SCHED_STACK_END_CHECK enabled. There are just too many functions that could have a large stack with KASAN_EXTRA due to large local variables that have been called over and over again without being able to reuse the stacks. Some noticiable ones are size 7648 shrink_page_list 3584 xfs_rmap_convert 3312 migrate_page_move_mapping 3312 dev_ethtool 3200 migrate_misplaced_transhuge_page 3168 copy_process There are other 49 functions are over 2k in size while compiling kernel with "-Wframe-larger-than=" even with a related minimal config on this machine. Hence, it is too much work to change Makefiles for each object to compile without "-fsanitize-address-use-after-scope" individually. [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715#c23 Although there is a patch in GCC 9 to help the situation, GCC 9 probably won't be released in a few months and then it probably take another 6-month to 1-year for all major distros to include it as a default. Hence, the stack usage with KASAN_EXTRA can be revisited again in 2020 when GCC 9 is everywhere. Until then, this patch will help users avoid stack overrun. This has already been fixed for arm64 for the same reason via 6e883067 ("arm64: kasan: Increase stack size for KASAN_EXTRA"). Link: http://lkml.kernel.org/r/20190109215209.2903-1-cai@lca.pwSigned-off-by: Qian Cai <cai@lca.pw> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Juerg Haefliger <juerg.haefliger@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Kairui Song authored
BugLink: https://bugs.launchpad.net/bugs/1822271 [ Upstream commit 2aa958c9 ] Kexec-ing a kernel with "efi=noruntime" on the first kernel's command line causes the following null pointer dereference: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 #PF error: [normal kernel read fault] Call Trace: efi_runtime_map_copy+0x28/0x30 bzImage64_load+0x688/0x872 arch_kexec_kernel_image_load+0x6d/0x70 kimage_file_alloc_init+0x13e/0x220 __x64_sys_kexec_file_load+0x144/0x290 do_syscall_64+0x55/0x1a0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Just skip the EFI info setup if EFI runtime services are not enabled. [ bp: Massage commit message. ] Suggested-by: Dave Young <dyoung@redhat.com> Signed-off-by: Kairui Song <kasong@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Dave Young <dyoung@redhat.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: bhe@redhat.com Cc: David Howells <dhowells@redhat.com> Cc: erik.schmauss@intel.com Cc: fanc.fnst@cn.fujitsu.com Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: kexec@lists.infradead.org Cc: lenb@kernel.org Cc: linux-acpi@vger.kernel.org Cc: Philipp Rudo <prudo@linux.vnet.ibm.com> Cc: rafael.j.wysocki@intel.com Cc: robert.moore@intel.com Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Cc: Yannik Sembritzki <yannik@sembritzki.me> Link: https://lkml.kernel.org/r/20190118111310.29589-2-kasong@redhat.comSigned-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Juerg Haefliger <juerg.haefliger@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Ronnie Sahlberg authored
BugLink: https://bugs.launchpad.net/bugs/1822271 [ Upstream commit 58d15ed1 ] The size of the fixed part of the create response is 88 bytes not 56. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Juerg Haefliger <juerg.haefliger@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Sinan Kaya authored
BugLink: https://bugs.launchpad.net/bugs/1822271 [ Upstream commit 0ee4b5f8 ] Add BACKLIGHT_LCD_SUPPORT for SAMSUNG_Q10 to fix the warning: unmet direct dependencies detected for BACKLIGHT_CLASS_DEVICE. SAMSUNG_Q10 selects BACKLIGHT_CLASS_DEVICE but BACKLIGHT_CLASS_DEVICE depends on BACKLIGHT_LCD_SUPPORT. Copy BACKLIGHT_LCD_SUPPORT dependency into SAMSUNG_Q10 to fix: WARNING: unmet direct dependencies detected for BACKLIGHT_CLASS_DEVICE Depends on [n]: HAS_IOMEM [=y] && BACKLIGHT_LCD_SUPPORT [=n] Selected by [y]: - SAMSUNG_Q10 [=y] && X86 [=y] && X86_PLATFORM_DEVICES [=y] && ACPI [=y] Signed-off-by: Sinan Kaya <okaya@kernel.org> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Juerg Haefliger <juerg.haefliger@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Ming Lu authored
BugLink: https://bugs.launchpad.net/bugs/1822271 [ Upstream commit 5d8fc4a9 ] The issue to be fixed in this commit is when libfc found it received a invalid FLOGI response from FC switch, it would return without freeing the fc frame, which is just the skb data. This would cause memory leak if FC switch keeps sending invalid FLOGI responses. This fix is just to make it execute `fc_frame_free(fp)` before returning from function `fc_lport_flogi_resp`. Signed-off-by: Ming Lu <ming.lu@citrix.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Juerg Haefliger <juerg.haefliger@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Yao Liu authored
BugLink: https://bugs.launchpad.net/bugs/1822271 [ Upstream commit 80ff0017 ] There is a NULL pointer dereference of dev_name in nfs_parse_devname() The oops looks something like: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 ... RIP: 0010:nfs_fs_mount+0x3b6/0xc20 [nfs] ... Call Trace: ? ida_alloc_range+0x34b/0x3d0 ? nfs_clone_super+0x80/0x80 [nfs] ? nfs_free_parsed_mount_data+0x60/0x60 [nfs] mount_fs+0x52/0x170 ? __init_waitqueue_head+0x3b/0x50 vfs_kern_mount+0x6b/0x170 do_mount+0x216/0xdc0 ksys_mount+0x83/0xd0 __x64_sys_mount+0x25/0x30 do_syscall_64+0x65/0x220 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fix this by adding a NULL check on dev_name Signed-off-by: Yao Liu <yotta.liu@ucloud.cn> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Juerg Haefliger <juerg.haefliger@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Andrew Lunn authored
BugLink: https://bugs.launchpad.net/bugs/1822271 [ Upstream commit 7ae710f9 ] On SoC reset all GPIO interrupts are disable. However, if kexec is used to boot into a new kernel, the SoC does not experience a reset. Hence GPIO interrupts can be left enabled from the previous kernel. It is then possible for the interrupt to fire before an interrupt handler is registered, resulting in the kernel complaining of an "unexpected IRQ trap", the interrupt is never cleared, and so fires again, resulting in an interrupt storm. Disable all GPIO interrupts before registering the GPIO IRQ chip. Fixes: 7f2691a1 ("gpio: vf610: add gpiolib/IRQ chip driver for Vybrid") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Juerg Haefliger <juerg.haefliger@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Alexey Khoroshilov authored
BugLink: https://bugs.launchpad.net/bugs/1822271 [ Upstream commit c69c29a1 ] If phy_power_on() fails in rk_gmac_powerup(), clocks are left enabled. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Juerg Haefliger <juerg.haefliger@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Yonglong Liu authored
BugLink: https://bugs.launchpad.net/bugs/1822271 [ Upstream commit cec8abba ] When reading phy registers via Clause 45 MDIO protocol, after write address operation, the driver use another write address operation, so can not read the right value of any phy registers. This patch fixes it. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Juerg Haefliger <juerg.haefliger@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Tomonori Sakita authored
BugLink: https://bugs.launchpad.net/bugs/1822271 [ Upstream commit 6571ebce ] If fill_level was not zero and status was not BUSY, result of "tx_prod - tx_cons - inuse" might be zero. Subtracting 1 unconditionally results invalid negative return value on this case. Make sure not to return an negative value. Signed-off-by: Tomonori Sakita <tomonori.sakita@sord.co.jp> Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp> Reviewed-by: Dalon L Westergreen <dalon.westergreen@linux.intel.com> Acked-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Juerg Haefliger <juerg.haefliger@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Max Filippov authored
BugLink: https://bugs.launchpad.net/bugs/1822271 [ Upstream commit 25384ce5 ] This fixes the following warning at boot when the kernel is booted on a board with more CPU cores than was configured in NR_CPUS: smp_init_cpus: Core Count = 8 smp_init_cpus: Core Id = 0 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at include/linux/cpumask.h:121 smp_init_cpus+0x54/0x74 Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 5.0.0-rc3-00015-g1459333f88a0 #124 Call Trace: __warn$part$3+0x6a/0x7c warn_slowpath_null+0x35/0x3c smp_init_cpus+0x54/0x74 setup_arch+0x1c0/0x1d0 start_kernel+0x44/0x310 _startup+0x107/0x107 Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Juerg Haefliger <juerg.haefliger@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Max Filippov authored
BugLink: https://bugs.launchpad.net/bugs/1822271 [ Upstream commit 8b1c42cd ] Otherwise it is impossible to enable CPUs after booting with 'maxcpus' parameter. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Juerg Haefliger <juerg.haefliger@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Max Filippov authored
BugLink: https://bugs.launchpad.net/bugs/1822271 [ Upstream commit 306b3830 ] Secondary CPU reset vector overlaps part of the double exception handler code, resulting in weird crashes and hangups when running user code. Move exception vectors one page up so that they don't clash with the secondary CPU reset vector. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Juerg Haefliger <juerg.haefliger@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Max Filippov authored
BugLink: https://bugs.launchpad.net/bugs/1822271 [ Upstream commit 32a7726c ] - add missing memory barriers to the secondary CPU synchronization spin loops; add comment to the matching memory barrier in the boot_secondary and __cpu_die functions; - use READ_ONCE/WRITE_ONCE to access cpu_start_id/cpu_start_ccount instead of reading/writing them directly; - re-initialize cpu_running every time before starting secondary CPU to flush possible previous CPU startup results. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Juerg Haefliger <juerg.haefliger@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Max Filippov authored
BugLink: https://bugs.launchpad.net/bugs/1822271 [ Upstream commit 4fe8713b ] ccount_timer_shutdown is called from the atomic context in the secondary_start_kernel, resulting in the following BUG: BUG: sleeping function called from invalid context in_atomic(): 1, irqs_disabled(): 1, pid: 0, name: swapper/1 Preemption disabled at: secondary_start_kernel+0xa1/0x130 Call Trace: ___might_sleep+0xe7/0xfc __might_sleep+0x41/0x44 synchronize_irq+0x24/0x64 disable_irq+0x11/0x14 ccount_timer_shutdown+0x12/0x20 clockevents_switch_state+0x82/0xb4 clockevents_exchange_device+0x54/0x60 tick_check_new_device+0x46/0x70 clockevents_register_device+0x8c/0xc8 clockevents_config_and_register+0x1d/0x2c local_timer_setup+0x75/0x7c secondary_start_kernel+0xb4/0x130 should_never_return+0x32/0x35 Use disable_irq_nosync instead of disable_irq to avoid it. This is safe because the ccount timer IRQ is per-CPU, and once IRQ is masked the ISR will not be called. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Juerg Haefliger <juerg.haefliger@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Suravee Suthikulpanit authored
BugLink: https://bugs.launchpad.net/bugs/1822271 [ Upstream commit 9825bd94 ] When a VM is terminated, the VFIO driver detaches all pass-through devices from VFIO domain by clearing domain id and page table root pointer from each device table entry (DTE), and then invalidates the DTE. Then, the VFIO driver unmap pages and invalidate IOMMU pages. Currently, the IOMMU driver keeps track of which IOMMU and how many devices are attached to the domain. When invalidate IOMMU pages, the driver checks if the IOMMU is still attached to the domain before issuing the invalidate page command. However, since VFIO has already detached all devices from the domain, the subsequent INVALIDATE_IOMMU_PAGES commands are being skipped as there is no IOMMU attached to the domain. This results in data corruption and could cause the PCI device to end up in indeterministic state. Fix this by invalidate IOMMU pages when detach a device, and before decrementing the per-domain device reference counts. Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Suggested-by: Joerg Roedel <joro@8bytes.org> Co-developed-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Fixes: 6de8ad9b ('x86/amd-iommu: Make iommu_flush_pages aware of multiple IOMMUs') Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Juerg Haefliger <juerg.haefliger@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
ZhangXiaoxu authored
BugLink: https://bugs.launchpad.net/bugs/1822271 [ Upstream commit 53ab60ba ] There is a UBSAN bug report as below: UBSAN: Undefined behaviour in net/netfilter/ipvs/ip_vs_ctl.c:2227:21 signed integer overflow: -2147483647 * 1000 cannot be represented in type 'int' Reproduce program: #include <stdio.h> #include <sys/types.h> #include <sys/socket.h> #define IPPROTO_IP 0 #define IPPROTO_RAW 255 #define IP_VS_BASE_CTL (64+1024+64) #define IP_VS_SO_SET_TIMEOUT (IP_VS_BASE_CTL+10) /* The argument to IP_VS_SO_GET_TIMEOUT */ struct ipvs_timeout_t { int tcp_timeout; int tcp_fin_timeout; int udp_timeout; }; int main() { int ret = -1; int sockfd = -1; struct ipvs_timeout_t to; sockfd = socket(AF_INET, SOCK_RAW, IPPROTO_RAW); if (sockfd == -1) { printf("socket init error\n"); return -1; } to.tcp_timeout = -2147483647; to.tcp_fin_timeout = -2147483647; to.udp_timeout = -2147483647; ret = setsockopt(sockfd, IPPROTO_IP, IP_VS_SO_SET_TIMEOUT, (char *)(&to), sizeof(to)); printf("setsockopt return %d\n", ret); return ret; } Return -EINVAL if the timeout value is negative or max than 'INT_MAX / HZ'. Signed-off-by: ZhangXiaoxu <zhangxiaoxu5@huawei.com> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Juerg Haefliger <juerg.haefliger@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Brian Welty authored
BugLink: https://bugs.launchpad.net/bugs/1822271 [ Upstream commit 904bba21 ] The work completion length for a receiving a UD send with immediate is short by 4 bytes causing application using this opcode to fail. The UD receive logic incorrectly subtracts 4 bytes for immediate value. These bytes are already included in header length and are used to calculate header/payload split, so the result is these 4 bytes are subtracted twice, once when the header length subtracted from the overall length and once again in the UD opcode specific path. Remove the extra subtraction when handling the opcode. Fixes: 77241056 ("IB/hfi1: add driver files") Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Brian Welty <brian.welty@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Juerg Haefliger <juerg.haefliger@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Stephane Eranian authored
BugLink: https://bugs.launchpad.net/bugs/1822271 [ Upstream commit 1497e804 ] This patch fixes an issue in cpumap.c when used with the TOPOLOGY header. In some configurations, some NUMA nodes may have no CPU (empty cpulist). Yet a cpumap map must be created otherwise perf abort with an error. This patch handles this case by creating a dummy map. Before: $ perf record -o - -e cycles noploop 2 | perf script -i - 0x6e8 [0x6c]: failed to process type: 80 After: $ perf record -o - -e cycles noploop 2 | perf script -i - noploop for 2 seconds Signed-off-by: Stephane Eranian <eranian@google.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1547885559-1657-1-git-send-email-eranian@google.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Juerg Haefliger <juerg.haefliger@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Su Yanjun authored
BugLink: https://bugs.launchpad.net/bugs/1822271 [ Upstream commit dd9ee344 ] Recently we run a network test over ipcomp virtual tunnel.We find that if a ipv4 packet needs fragment, then the peer can't receive it. We deep into the code and find that when packet need fragment the smaller fragment will be encapsulated by ipip not ipcomp. So when the ipip packet goes into xfrm, it's skb->dev is not properly set. The ipv4 reassembly code always set skb'dev to the last fragment's dev. After ipv4 defrag processing, when the kernel rp_filter parameter is set, the skb will be drop by -EXDEV error. This patch adds compatible support for the ipip process in ipcomp virtual tunnel. Signed-off-by: Su Yanjun <suyj.fnst@cn.fujitsu.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Juerg Haefliger <juerg.haefliger@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Alistair Strachan authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit 47bb1179 upstream. When initially testing the Camera Terminal Descriptor wTerminalType field (buffer[4]), no mask is used. Later in the function, the MSB is overloaded to store the descriptor subtype, and so a mask of 0x7fff is used to check the type. If a descriptor is specially crafted to set this overloaded bit in the original wTerminalType field, the initial type check will fail (falling through, without adjusting the buffer size), but the later type checks will pass, assuming the buffer has been made suitably large, causing an overflow. Avoid this problem by checking for the MSB in the wTerminalType field. If the bit is set, assume the descriptor is bad, and abort parsing it. Originally reported here: https://groups.google.com/forum/#!topic/syzkaller/Ot1fOE6v1d8 A similar (non-compiling) patch was provided at that time. Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Alistair Strachan <astrachan@google.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Juerg Haefliger <juerg.haefliger@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Ido Schimmel authored
BugLink: https://bugs.launchpad.net/bugs/1822271 [ Upstream commit 87c11f1d ] Similar to commit 44f49dd8 ("ipmr: fix possible race resulting from improper usage of IP_INC_STATS_BH() in preemptible context."), we cannot assume preemption is disabled when incrementing the counter and accessing a per-CPU variable. Preemption can be enabled when we add a route in process context that corresponds to packets stored in the unresolved queue, which are then forwarded using this route [1]. Fix this by using IP6_INC_STATS() which takes care of disabling preemption on architectures where it is needed. [1] [ 157.451447] BUG: using __this_cpu_add() in preemptible [00000000] code: smcrouted/2314 [ 157.460409] caller is ip6mr_forward2+0x73e/0x10e0 [ 157.460434] CPU: 3 PID: 2314 Comm: smcrouted Not tainted 5.0.0-rc7-custom-03635-g22f2712113f1 #1336 [ 157.460449] Hardware name: Mellanox Technologies Ltd. MSN2100-CB2FO/SA001017, BIOS 5.6.5 06/07/2016 [ 157.460461] Call Trace: [ 157.460486] dump_stack+0xf9/0x1be [ 157.460553] check_preemption_disabled+0x1d6/0x200 [ 157.460576] ip6mr_forward2+0x73e/0x10e0 [ 157.460705] ip6_mr_forward+0x9a0/0x1510 [ 157.460771] ip6mr_mfc_add+0x16b3/0x1e00 [ 157.461155] ip6_mroute_setsockopt+0x3cb/0x13c0 [ 157.461384] do_ipv6_setsockopt.isra.8+0x348/0x4060 [ 157.462013] ipv6_setsockopt+0x90/0x110 [ 157.462036] rawv6_setsockopt+0x4a/0x120 [ 157.462058] __sys_setsockopt+0x16b/0x340 [ 157.462198] __x64_sys_setsockopt+0xbf/0x160 [ 157.462220] do_syscall_64+0x14d/0x610 [ 157.462349] entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 0912ea38 ("[IPV6] MROUTE: Add stats in multicast routing module method ip6_mr_forward().") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Amit Cohen <amitc@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Juerg Haefliger <juerg.haefliger@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Andrew Lunn authored
BugLink: https://bugs.launchpad.net/bugs/1822271 [ Upstream commit 6e46e2d8 ] The switch maintains u64 counters for the number of octets sent and received. These are kept as two u32's which need to be combined. Fix the combing, which wrongly worked on u16's. Fixes: 80c4627b ("dsa: mv88x6xxx: Refactor getting a single statistic") Reported-by: Chris Healy <Chris.Healy@zii.aero> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Juerg Haefliger <juerg.haefliger@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Paul Moore authored
BugLink: https://bugs.launchpad.net/bugs/1822271 [ Upstream commit 5578de48 ] There are two array out-of-bounds memory accesses, one in cipso_v4_map_lvl_valid(), the other in netlbl_bitmap_walk(). Both errors are embarassingly simple, and the fixes are straightforward. As a FYI for anyone backporting this patch to kernels prior to v4.8, you'll want to apply the netlbl_bitmap_walk() patch to cipso_v4_bitmap_walk() as netlbl_bitmap_walk() doesn't exist before Linux v4.8. Reported-by: Jann Horn <jannh@google.com> Fixes: 446fda4f ("[NetLabel]: CIPSOv4 engine") Fixes: 3faa8f98 ("netlabel: Move bitmap manipulation functions to the NetLabel core.") Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Juerg Haefliger <juerg.haefliger@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Mike Kravetz authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit cb6acd01 upstream. hugetlb pages should only be migrated if they are 'active'. The routines set/clear_page_huge_active() modify the active state of hugetlb pages. When a new hugetlb page is allocated at fault time, set_page_huge_active is called before the page is locked. Therefore, another thread could race and migrate the page while it is being added to page table by the fault code. This race is somewhat hard to trigger, but can be seen by strategically adding udelay to simulate worst case scheduling behavior. Depending on 'how' the code races, various BUG()s could be triggered. To address this issue, simply delay the set_page_huge_active call until after the page is successfully added to the page table. Hugetlb pages can also be leaked at migration time if the pages are associated with a file in an explicitly mounted hugetlbfs filesystem. For example, consider a two node system with 4GB worth of huge pages available. A program mmaps a 2G file in a hugetlbfs filesystem. It then migrates the pages associated with the file from one node to another. When the program exits, huge page counts are as follows: node0 1024 free_hugepages 1024 nr_hugepages node1 0 free_hugepages 1024 nr_hugepages Filesystem Size Used Avail Use% Mounted on nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool That is as expected. 2G of huge pages are taken from the free_hugepages counts, and 2G is the size of the file in the explicitly mounted filesystem. If the file is then removed, the counts become: node0 1024 free_hugepages 1024 nr_hugepages node1 1024 free_hugepages 1024 nr_hugepages Filesystem Size Used Avail Use% Mounted on nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool Note that the filesystem still shows 2G of pages used, while there actually are no huge pages in use. The only way to 'fix' the filesystem accounting is to unmount the filesystem If a hugetlb page is associated with an explicitly mounted filesystem, this information in contained in the page_private field. At migration time, this information is not preserved. To fix, simply transfer page_private from old to new page at migration time if necessary. There is a related race with removing a huge page from a file and migration. When a huge page is removed from the pagecache, the page_mapping() field is cleared, yet page_private remains set until the page is actually freed by free_huge_page(). A page could be migrated while in this state. However, since page_mapping() is not set the hugetlbfs specific routine to transfer page_private is not called and we leak the page count in the filesystem. To fix that, check for this condition before migrating a huge page. If the condition is detected, return EBUSY for the page. Link: http://lkml.kernel.org/r/74510272-7319-7372-9ea6-ec914734c179@oracle.com Link: http://lkml.kernel.org/r/20190212221400.3512-1-mike.kravetz@oracle.com Fixes: bcc54222 ("mm: hugetlb: introduce page_huge_active") Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: <stable@vger.kernel.org> [mike.kravetz@oracle.com: v2] Link: http://lkml.kernel.org/r/7534d322-d782-8ac6-1c8d-a8dc380eb3ab@oracle.com [mike.kravetz@oracle.com: update comment and changelog] Link: http://lkml.kernel.org/r/420bcfd6-158b-38e4-98da-26d0cd85bd01@oracle.comSigned-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Juerg Haefliger <juerg.haefliger@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Liu Xiang authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit 72faa7a7 upstream. The irq_pages is the number of pages for irq stack, but not the order which is needed by __get_free_pages(). We can use get_order() to calculate the accurate order. Signed-off-by: Liu Xiang <liu.xiang6@zte.com.cn> Signed-off-by: Paul Burton <paul.burton@mips.com> Fixes: fe8bd18f ("MIPS: Introduce irq_stack") Cc: linux-mips@vger.kernel.org Cc: stable@vger.kernel.org # v4.11+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Juerg Haefliger <juerg.haefliger@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Gustavo A. R. Silva authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit d7ac3c6e upstream. IndexCard is indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/char/applicom.c:418 ac_write() warn: potential spectre issue 'apbs' [r] drivers/char/applicom.c:728 ac_ioctl() warn: potential spectre issue 'apbs' [r] (local cap) Fix this by sanitizing IndexCard before using it to index apbs. Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://lore.kernel.org/lkml/20180423164740.GY17484@dhcp22.suse.cz/ Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Juerg Haefliger <juerg.haefliger@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Jiaxun Yang authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit 02371991 upstream. Some F17h models do not have CPB set in CPUID even though the CPU supports it. Set the feature bit unconditionally on all F17h. [ bp: Rewrite commit message and patch. ] Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Sherry Hurwitz <sherry.hurwitz@amd.com> Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20181120030018.5185-1-jiaxun.yang@flygoat.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Juerg Haefliger <juerg.haefliger@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Rajasingh Thavamani authored
BugLink: https://bugs.launchpad.net/bugs/1822271 [ Upstream commit 232ba3a5 ] With Micrel KSZ8061 PHY, the link may occasionally not come up after Ethernet cable connect. The vendor's (Microchip, former Micrel) errata sheet 80000688A.pdf descripes the problem and possible workarounds in detail, see below. The batch implements workaround 1, which permanently fixes the issue. DESCRIPTION Link-up may not occur properly when the Ethernet cable is initially connected. This issue occurs more commonly when the cable is connected slowly, but it may occur any time a cable is connected. This issue occurs in the auto-negotiation circuit, and will not occur if auto-negotiation is disabled (which requires that the two link partners be set to the same speed and duplex). END USER IMPLICATIONS When this issue occurs, link is not established. Subsequent cable plug/unplaug cycle will not correct the issue. WORk AROUND There are four approaches to work around this issue: 1. This issue can be prevented by setting bit 15 in MMD device address 1, register 2, prior to connecting the cable or prior to setting the Restart Auto-negotiation bit in register 0h. The MMD registers are accessed via the indirect access registers Dh and Eh, or via the Micrel EthUtil utility as shown here: . if using the EthUtil utility (usually with a Micrel KSZ8061 Evaluation Board), type the following commands: > address 1 > mmd 1 > iw 2 b61a . Alternatively, write the following registers to write to the indirect MMD register: Write register Dh, data 0001h Write register Eh, data 0002h Write register Dh, data 4001h Write register Eh, data B61Ah 2. The issue can be avoided by disabling auto-negotiation in the KSZ8061, either by the strapping option, or by clearing bit 12 in register 0h. Care must be taken to ensure that the KSZ8061 and the link partner will link with the same speed and duplex. Note that the KSZ8061 defaults to full-duplex when auto-negotiation is off, but other devices may default to half-duplex in the event of failed auto-negotiation. 3. The issue can be avoided by connecting the cable prior to powering-up or resetting the KSZ8061, and leaving it plugged in thereafter. 4. If the above measures are not taken and the problem occurs, link can be recovered by setting the Restart Auto-Negotiation bit in register 0h, or by resetting or power cycling the device. Reset may be either hardware reset or software reset (register 0h, bit 15). PLAN This errata will not be corrected in the future revision. Fixes: 7ab59dc1 ("drivers/net/phy/micrel_phy: Add support for new PHYs") Signed-off-by: Alexander Onnasch <alexander.onnasch@landisgyr.com> Signed-off-by: Rajasingh Thavamani <T.Rajasingh@landisgyr.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Juerg Haefliger <juerg.haefliger@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Nazarov Sergey authored
BugLink: https://bugs.launchpad.net/bugs/1822271 [ Upstream commit 3da1ed7a ] Extract IP options in cipso_v4_error and use __icmp_send. Signed-off-by: Sergey Nazarov <s-nazarov@yandex.ru> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Juerg Haefliger <juerg.haefliger@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Nazarov Sergey authored
BugLink: https://bugs.launchpad.net/bugs/1822271 [ Upstream commit 9ef6b42a ] Add __icmp_send function having ip_options struct parameter Signed-off-by: Sergey Nazarov <s-nazarov@yandex.ru> Reviewed-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Juerg Haefliger <juerg.haefliger@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Igor Druzhinin authored
BugLink: https://bugs.launchpad.net/bugs/1822271 [ Upstream commit 99e87f56 ] Zero-copy callback flag is not yet set on frag list skb at the moment xenvif_handle_frag_list() returns -ENOMEM. This eventually results in leaking grant ref mappings since xenvif_zerocopy_callback() is never called for these fragments. Those eventually build up and cause Xen to kill Dom0 as the slots get reused for new mappings: "d0v0 Attempt to implicitly unmap a granted PTE c010000329fce005" That behavior is observed under certain workloads where sudden spikes of page cache writes coexist with active atomic skb allocations from network traffic. Additionally, rework the logic to deal with frag_list deallocation in a single place. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Juerg Haefliger <juerg.haefliger@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
YueHaibing authored
BugLink: https://bugs.launchpad.net/bugs/1822271 [ Upstream commit 58bdd544 ] KASAN report this: BUG: KASAN: null-ptr-deref in nfc_llcp_build_gb+0x37f/0x540 [nfc] Read of size 3 at addr 0000000000000000 by task syz-executor.0/5401 CPU: 0 PID: 5401 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 kasan_report+0x171/0x18d mm/kasan/report.c:321 memcpy+0x1f/0x50 mm/kasan/common.c:130 nfc_llcp_build_gb+0x37f/0x540 [nfc] nfc_llcp_register_device+0x6eb/0xb50 [nfc] nfc_register_device+0x50/0x1d0 [nfc] nfcsim_device_new+0x394/0x67d [nfcsim] ? 0xffffffffc1080000 nfcsim_init+0x6b/0x1000 [nfcsim] do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f9cb79dcc58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000280 RDI: 0000000000000003 RBP: 00007f9cb79dcc70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f9cb79dd6bc R13: 00000000004bcefb R14: 00000000006f7030 R15: 0000000000000004 nfc_llcp_build_tlv will return NULL on fails, caller should check it, otherwise will trigger a NULL dereference. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: eda21f16 ("NFC: Set MIU and RW values from CONNECT and CC LLCP frames") Fixes: d646960f ("NFC: Initial LLCP support") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Juerg Haefliger <juerg.haefliger@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Michael Chan authored
BugLink: https://bugs.launchpad.net/bugs/1822271 [ Upstream commit 2b3c6885 ] There have been reports of oversize UDP packets being sent to the driver to be transmitted, causing error conditions. The issue is likely caused by the dst of the SKB switching between 'lo' with 64K MTU and the hardware device with a smaller MTU. Patches are being proposed by Mahesh Bandewar <maheshb@google.com> to fix the issue. In the meantime, add a quick length check in the driver to prevent the error. The driver uses the TX packet size as index to look up an array to setup the TX BD. The array is large enough to support all MTU sizes supported by the driver. The oversize TX packet causes the driver to index beyond the array and put garbage values into the TX BD. Add a simple check to prevent this. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Juerg Haefliger <juerg.haefliger@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Ido Schimmel authored
BugLink: https://bugs.launchpad.net/bugs/1822271 [ Upstream commit 692c31bd ] When team is used in loadbalance mode a BPF filter can be used to provide a hash which will determine the Tx port. When the netdev is later unregistered the filter is not freed which results in memory leaks [1]. Fix by freeing the program and the corresponding filter when unregistering the netdev. [1] unreferenced object 0xffff8881dbc47cc8 (size 16): comm "teamd", pid 3068, jiffies 4294997779 (age 438.247s) hex dump (first 16 bytes): a3 00 6b 6b 6b 6b 6b 6b 88 a5 82 e1 81 88 ff ff ..kkkkkk........ backtrace: [<000000008a3b47e3>] team_nl_cmd_options_set+0x88f/0x11b0 [<00000000c4f4f27e>] genl_family_rcv_msg+0x78f/0x1080 [<00000000610ef838>] genl_rcv_msg+0xca/0x170 [<00000000a281df93>] netlink_rcv_skb+0x132/0x380 [<000000004d9448a2>] genl_rcv+0x29/0x40 [<000000000321b2f4>] netlink_unicast+0x4c0/0x690 [<000000008c25dffb>] netlink_sendmsg+0x929/0xe10 [<00000000068298c5>] sock_sendmsg+0xc8/0x110 [<0000000082a61ff0>] ___sys_sendmsg+0x77a/0x8f0 [<00000000663ae29d>] __sys_sendmsg+0xf7/0x250 [<0000000027c5f11a>] do_syscall_64+0x14d/0x610 [<000000006cfbc8d3>] entry_SYSCALL_64_after_hwframe+0x49/0xbe [<00000000e23197e2>] 0xffffffffffffffff unreferenced object 0xffff8881e182a588 (size 2048): comm "teamd", pid 3068, jiffies 4294997780 (age 438.247s) hex dump (first 32 bytes): 20 00 00 00 02 00 00 00 30 00 00 00 28 f0 ff ff .......0...(... 07 00 00 00 00 00 00 00 28 00 00 00 00 00 00 00 ........(....... backtrace: [<000000002daf01fb>] lb_bpf_func_set+0x45c/0x6d0 [<000000008a3b47e3>] team_nl_cmd_options_set+0x88f/0x11b0 [<00000000c4f4f27e>] genl_family_rcv_msg+0x78f/0x1080 [<00000000610ef838>] genl_rcv_msg+0xca/0x170 [<00000000a281df93>] netlink_rcv_skb+0x132/0x380 [<000000004d9448a2>] genl_rcv+0x29/0x40 [<000000000321b2f4>] netlink_unicast+0x4c0/0x690 [<000000008c25dffb>] netlink_sendmsg+0x929/0xe10 [<00000000068298c5>] sock_sendmsg+0xc8/0x110 [<0000000082a61ff0>] ___sys_sendmsg+0x77a/0x8f0 [<00000000663ae29d>] __sys_sendmsg+0xf7/0x250 [<0000000027c5f11a>] do_syscall_64+0x14d/0x610 [<000000006cfbc8d3>] entry_SYSCALL_64_after_hwframe+0x49/0xbe [<00000000e23197e2>] 0xffffffffffffffff Fixes: 01d7f30a ("team: add loadbalance mode") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Juerg Haefliger <juerg.haefliger@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Kai-Heng Feng authored
BugLink: https://bugs.launchpad.net/bugs/1822271 [ Upstream commit b33b7cd6 ] Some sky2 chips fire IRQ after S3, before the driver is fully resumed: [ 686.804877] do_IRQ: 1.37 No irq handler for vector This is likely a platform bug that device isn't fully quiesced during S3. Use MSI-X, maskable MSI or INTx can prevent this issue from happening. Since MSI-X and maskable MSI are not supported by this device, fallback to use INTx on affected platforms. BugLink: https://bugs.launchpad.net/bugs/1807259 BugLink: https://bugs.launchpad.net/bugs/1809843Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Juerg Haefliger <juerg.haefliger@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
YueHaibing authored
BugLink: https://bugs.launchpad.net/bugs/1822271 [ Upstream commit 895a5e96 ] syzkaller report this: BUG: memory leak unreferenced object 0xffff88837a71a500 (size 256): comm "syz-executor.2", pid 9770, jiffies 4297825125 (age 17.843s) hex dump (first 32 bytes): 00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N.......... ff ff ff ff ff ff ff ff 20 c0 ef 86 ff ff ff ff ........ ....... backtrace: [<00000000db12624b>] netdev_register_kobject+0x124/0x2e0 net/core/net-sysfs.c:1751 [<00000000dc49a994>] register_netdevice+0xcc1/0x1270 net/core/dev.c:8516 [<00000000e5f3fea0>] tun_set_iff drivers/net/tun.c:2649 [inline] [<00000000e5f3fea0>] __tun_chr_ioctl+0x2218/0x3d20 drivers/net/tun.c:2883 [<000000001b8ac127>] vfs_ioctl fs/ioctl.c:46 [inline] [<000000001b8ac127>] do_vfs_ioctl+0x1a5/0x10e0 fs/ioctl.c:690 [<0000000079b269f8>] ksys_ioctl+0x89/0xa0 fs/ioctl.c:705 [<00000000de649beb>] __do_sys_ioctl fs/ioctl.c:712 [inline] [<00000000de649beb>] __se_sys_ioctl fs/ioctl.c:710 [inline] [<00000000de649beb>] __x64_sys_ioctl+0x74/0xb0 fs/ioctl.c:710 [<000000007ebded1e>] do_syscall_64+0xc8/0x580 arch/x86/entry/common.c:290 [<00000000db315d36>] entry_SYSCALL_64_after_hwframe+0x49/0xbe [<00000000115be9bb>] 0xffffffffffffffff It should call kset_unregister to free 'dev->queues_kset' in error path of register_queue_kobjects, otherwise will cause a mem leak. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 1d24eb48 ("xps: Transmit Packet Steering") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Juerg Haefliger <juerg.haefliger@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Dmitry Eremin authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit 9563fe8a upstream. Buffer overflow of string buffer due to non null terminated string. Use strlcpy() when it's justifiable. Use sizeof(var) instead of constants. Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4629 Reviewed-on: http://review.whamcloud.com/9389Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Juerg Haefliger <juerg.haefliger@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1822271 Not upstream as isdn is long deleted. Fix up a strncpy build warning for isdn_tty_suspend() using strscpy. It's not like anyone uses this code anyway, and this gets rid of a build warnings so that we can see real warnings as they pop up over time. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Juerg Haefliger <juerg.haefliger@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-