- 24 Nov, 2020 35 commits
-
-
Chris Park authored
[Why] Incorrect panel register settings are applied for power sequence because the register macro is not defined in resource. [How] Implement same register space to future resource files. Signed-off-by: Chris Park <Chris.Park@amd.com> Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Ashley Thomas authored
[Why] Some sink devices wish to have access to the minimum HBlank supported by the ASIC. [How] Make the ASIC minimum HBlank available in Source Device information address 0x340. Signed-off-by: Ashley Thomas <Ashley.Thomas2@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Charlene Liu authored
[why] HDCP 1.4 failed on SL8800 SW w/a test driver use. [how] slower down the HW i2c speed when used by HW i2c. this request: each acquired_i2c_engine setup the i2c speed needed. and set the I2c engine for HDCP use at release_engine. this covers SW using HW I2c engine and HDCP using HW I2c engine. for dmcu using HW I2c engine, needs add similar logic in dmcufw. Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Christian König authored
Same as gmc9, basically filter the fault, reroute or handle it. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Christian König authored
Felix pointed out that we need this for Navi as well. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Christian König authored
Looks like we can't enabled the IH1/IH2 feature for Vega20, make sure retry faults are handled on a separate ring anyway. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Christian König authored
Seems like we won't get the hardware IH1/2 rings on Vega20 working. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Christian König authored
Add a soft IH ring implementation similar to the hardware IH1/2. This can be used if the hardware delegation of interrupts to IH1/2 doesn't work for some reason. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Christian König authored
Return early in case of a ratelimit and don't print leading zeros for the address. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Christian König authored
The address space is only 48bit, not 64bit. And the VMHUBs work with sign extended addresses. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Nirmoy Das authored
Use generic DMA api instead of bus-specific API. Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Nirmoy Das authored
Use generic DMA api instead of bus-specific API. Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Jiansong Chen authored
Update GC golden setting for navy_flounder. Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Likun Gao authored
Update golden setting for sienna_cichlid. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Gustavo A. R. Silva authored
In preparation to enable -Wimplicit-fallthrough for Clang, fix a couple of warnings by explicitly adding a break statement instead of letting the code fall through to the next case, and a fallthrough pseudo-keyword as a replacement for a /* fall through */ comment, Notice that Clang doesn't recognize /* fall through */ comments as implicit fall-through markings. Link: https://github.com/KSPP/linux/issues/115Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Gustavo A. R. Silva authored
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple warnings by explicitly adding multiple break statements instead of just letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Gustavo A. R. Silva authored
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple warnings by explicitly adding multiple fallthrough pseudo-keyword macros, as replacement for /* fall through */ comments. Notice that Clang doesn't recognize /* fall through */ comments as implicit fall-through markings. Link: https://github.com/KSPP/linux/issues/115Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Gustavo A. R. Silva authored
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple warnings by explicitly adding multiple break statements instead of just letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Rodrigo Siqueira authored
The HDCP feature requires at least one connector attached to the device; however, some GPUs do not have a physical output, making the HDCP initialization irrelevant. This patch disables HDCP initialization when the graphic card does not have output. Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
We only need to arbitrate VGA access on VGA compatible devices. Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Bernard Zhao authored
Fix check_patch.pl warning: WARNING: Prefer kmalloc_array over kmalloc with multiply +bps = kmalloc(align_space * sizeof((*data)->bps), GFP_KERNEL); WARNING: Prefer kmalloc_array over kmalloc with multiply +bps_bo = kmalloc(align_space * sizeof((*data)->bps_bo), GFP_KERNEL); kmalloc_array has multiply overflow check, which will be safer. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Bernard Zhao <bernard@vivo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Bernard Zhao authored
Fix check_patch.pl warning: kmalloc_array uses number as first arg, sizeof is generally wrong. +fences = kmalloc_array(sizeof(void *), id_mgr->num_ids, GFP_KERNEL); Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Bernard Zhao <bernard@vivo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
James Zhu authored
Support software ring share memory with vcn firmware. Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
James Zhu authored
Add dec software ring vm functions to support. Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
James Zhu authored
Add vcn software ring decode ring test and decode ib test. Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
James Zhu authored
Add macro, structure and function prototype to support vcn dec software ring. Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
James Zhu authored
refactor dec message functions to add dec software ring support. Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Likun Gao authored
Default runtime logic not changed. Provide an alternative runtime method. (set 1 to use BACO; 2 to use BAMACO) When set reset_method to 4, it will use BACO or BAMACO for gpu reset, according to runpm value. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Likun Gao authored
Some features are still disabled after runtime pm resume. This can take the hardware back. Unlike other projects, this doesn't need pptable retransfer. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Sonny Jiang authored
The UVD firmware is copied to cpu addr in uvd_resume, so it should be used after that. This is to fix a bug introduced by patch drm/amdgpu: fix SI UVD firmware validate resume fail. Signed-off-by: Sonny Jiang <sonny.jiang@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Jinzhou Su authored
Using KIQ to map GFX queues instead of MMIO for gfx async ring, add missing doorbell range setting. v2: fix typo Signed-off-by: Jinzhou.Su <Jinzhou.Su@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Kenneth Feng authored
This has been confirmed that unload message is not needed from SIENNA_CICHLID in reset. Otherwise it will cause the fw wrong state after reset and no response for any messages. Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Kenneth Feng authored
fix the null pointer issue when runtime pm is triggered. Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Bhawanpreet Lakha authored
dpcs reg are missing for dcn302 link encoder regs list, so add them. Just like dcn3 Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Sonny Jiang authored
The SI UVD firmware validate key is stored at the end of firmware, which is changed during resume while playing video. So get the key at sw_init and store it for fw validate using. Signed-off-by: Sonny Jiang <sonny.jiang@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
- 18 Nov, 2020 5 commits
-
-
Tao Zhou authored
Add device id for dimgrey_cavefish. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Tao Zhou authored
add device ID for navy_flounder v2: squash in updates Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Bhawanpreet Lakha authored
[Why] These comments are helpful in understanding which case each if statement handles. [How] Add comments for state transitions (9 possible cases) Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Zhan Liu <zhan.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Bhawanpreet Lakha authored
[Why] We call add display multiple times because DESIRED->ENABLED cannot happen instantaneously. We can't compare the new_state/old_state to avoid this because on unplug we set the state to DESIRED and on hotplug the state will still be DESIRED. [How] Add a flag to dm_connector_state to keep track of when to enable or disable HDCP Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Zhan Liu <zhan.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Tao Zhou authored
There is no need to reset DPM for PPTable uploading on dimgrey_cavefish and PMFW can handle it, same as navy_flounder. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-