- 30 May, 2018 40 commits
-
-
Tom Abraham authored
[ Upstream commit a06ad633 ] Calling swapon() on a zero length swap file on SSD can lead to a divide-by-zero. Although creating such files isn't possible with mkswap and they woud be considered invalid, it would be better for the swapon code to be more robust and handle this condition gracefully (return -EINVAL). Especially since the fix is small and straightforward. To help with wear leveling on SSD, the swapon syscall calculates a random position in the swap file using modulo p->highest_bit, which is set to maxpages - 1 in read_swap_header. If the swap file is zero length, read_swap_header sets maxpages=1 and last_page=0, resulting in p->highest_bit=0 and we divide-by-zero when we modulo p->highest_bit in swapon syscall. This can be prevented by having read_swap_header return zero if last_page is zero. Link: http://lkml.kernel.org/r/5AC747C1020000A7001FA82C@prv-mh.provo.novell.comSigned-off-by:
Thomas Abraham <tabraham@suse.com> Reported-by: <Mark.Landis@Teradata.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Danilo Krummrich authored
[ Upstream commit a0b0d1c3 ] proc_sys_link_fill_cache() does not take currently unregistering sysctl tables into account, which might result into a page fault in sysctl_follow_link() - add a check to fix it. This bug has been present since v3.4. Link: http://lkml.kernel.org/r/20180228013506.4915-1-danilokrummrich@dk-develop.de Fixes: 0e47c99d ("sysctl: Replace root_list with links between sysctl_table_sets") Signed-off-by:
Danilo Krummrich <danilokrummrich@dk-develop.de> Acked-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
-
Dave Hansen authored
[ Upstream commit 639d6aaf ] __ro_after_init data gets stuck in the .rodata section. That's normally fine because the kernel itself manages the R/W properties. But, if we run __change_page_attr() on an area which is __ro_after_init, the .rodata checks will trigger and force the area to be immediately read-only, even if it is early-ish in boot. This caused problems when trying to clear the _PAGE_GLOBAL bit for these area in the PTI code: it cleared _PAGE_GLOBAL like I asked, but also took it up on itself to clear _PAGE_RW. The kernel then oopses the next time it wrote to a __ro_after_init data structure. To fix this, add the kernel_set_to_readonly check, just like we have for kernel text, just a few lines below in this function. Signed-off-by:
Dave Hansen <dave.hansen@linux.intel.com> Acked-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Joerg Roedel authored
[ Upstream commit e3e28812 ] The pmd_set_huge() and pud_set_huge() functions are used from the generic ioremap() code to establish large mappings where this is possible. But the generic ioremap() code does not check whether the PMD/PUD entries are already populated with a non-leaf entry, so that any page-table pages these entries point to will be lost. Further, on x86-32 with SHARED_KERNEL_PMD=0, this causes a BUG_ON() in vmalloc_sync_one() when PMD entries are synced from swapper_pg_dir to the current page-table. This happens because the PMD entry from swapper_pg_dir was promoted to a huge-page entry while the current PGD still contains the non-leaf entry. Because both entries are present and point to a different page, the BUG_ON() triggers. This was actually triggered with pti-x32 enabled in a KVM virtual machine by the graphics driver. A real and better fix for that would be to improve the page-table handling in the generic ioremap() code. But that is out-of-scope for this patch-set and left for later work. Reported-by:
David H. Gutteridge <dhgutteridge@sympatico.ca> Signed-off-by:
Joerg Roedel <jroedel@suse.de> Reviewed-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Waiman Long <llong@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: keescook@google.com Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20180411152437.GC15462@8bytes.orgSigned-off-by:
-
Johannes Thumshirn authored
[ Upstream commit 74c6c715 ] NVMe over Fabrics 1.0 Section 5.2 "Discovery Controller Properties and Command Support" Figure 31 "Discovery Controller – Admin Commands" explicitly listst all commands but "Get Log Page" and "Identify" as reserved, but NetApp report the Linux host is sending Keep Alive commands to the discovery controller, which is a violation of the Spec. We're already checking for discovery controllers when configuring the keep alive timeout but when creating a discovery controller we're not hard wiring the keep alive timeout to 0 and thus remain on NVME_DEFAULT_KATO for the discovery controller. This can be easily remproduced when issuing a direct connect to the discovery susbsystem using: 'nvme connect [...] --nqn=nqn.2014-08.org.nvmexpress.discovery' Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Fixes: 07bfcd09 ("nvme-fabrics: add a generic NVMe over Fabrics library") Reported-by:
Martin George <marting@netapp.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Keith Busch <keith.busch@intel.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Rich Felker authored
[ Upstream commit 96a59899 ] When responding to a debug trap (breakpoint) in userspace, the kernel's trap handler raised SIGTRAP but returned from the trap via a code path that ignored pending signals, resulting in an infinite loop re-executing the trapping instruction. Signed-off-by:
Rich Felker <dalias@libc.org> Signed-off-by:
-
Yelena Krivosheev authored
[ Upstream commit e81b5e01 ] In mvneta_port_up() we enable relevant RX and TX port queues by write queues bit map to an appropriate register. q_map must be ZERO in the beginning of this process. Signed-off-by:
Yelena Krivosheev <yelena@marvell.com> Acked-by:
Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Toshiaki Makita authored
[ Upstream commit ae474573 ] In some situation vlan packets do not have ethernet headers. One example is packets from tun devices. Users can specify vlan protocol in tun_pi field instead of IP protocol, and skb_vlan_untag() attempts to untag such packets. skb_vlan_untag() (more precisely, skb_reorder_vlan_header() called by it) however did not expect packets without ethernet headers, so in such a case size argument for memmove() underflowed and triggered crash. ==== BUG: unable to handle kernel paging request at ffff8801cccb8000 IP: __memmove+0x24/0x1a0 arch/x86/lib/memmove_64.S:43 PGD 9cee067 P4D 9cee067 PUD 1d9401063 PMD 1cccb7063 PTE 2810100028101 Oops: 000b [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 17663 Comm: syz-executor2 Not tainted 4.16.0-rc7+ #368 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__memmove+0x24/0x1a0 arch/x86/lib/memmove_64.S:43 RSP: 0018:ffff8801cc046e28 EFLAGS: 00010287 RAX: ffff8801ccc244c4 RBX: fffffffffffffffe RCX: fffffffffff6c4c2 RDX: fffffffffffffffe RSI: ffff8801cccb7ffc RDI: ffff8801cccb8000 RBP: ffff8801cc046e48 R08: ffff8801ccc244be R09: ffffed0039984899 R10: 0000000000000001 R11: ffffed0039984898 R12: ffff8801ccc244c4 R13: ffff8801ccc244c0 R14: ffff8801d96b7c06 R15: ffff8801d96b7b40 FS: 00007febd562d700(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff8801cccb8000 CR3: 00000001ccb2f006 CR4: 00000000001606e0 DR0: 0000000020000000 DR1: 0000000020000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600 Call Trace: memmove include/linux/string.h:360 [inline] skb_reorder_vlan_header net/core/skbuff.c:5031 [inline] skb_vlan_untag+0x470/0xc40 net/core/skbuff.c:5061 __netif_receive_skb_core+0x119c/0x3460 net/core/dev.c:4460 __netif_receive_skb+0x2c/0x1b0 net/core/dev.c:4627 netif_receive_skb_internal+0x10b/0x670 net/core/dev.c:4701 netif_receive_skb+0xae/0x390 net/core/dev.c:4725 tun_rx_batched.isra.50+0x5ee/0x870 drivers/net/tun.c:1555 tun_get_user+0x299e/0x3c20 drivers/net/tun.c:1962 tun_chr_write_iter+0xb9/0x160 drivers/net/tun.c:1990 call_write_iter include/linux/fs.h:1782 [inline] new_sync_write fs/read_write.c:469 [inline] __vfs_write+0x684/0x970 fs/read_write.c:482 vfs_write+0x189/0x510 fs/read_write.c:544 SYSC_write fs/read_write.c:589 [inline] SyS_write+0xef/0x220 fs/read_write.c:581 do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x454879 RSP: 002b:00007febd562cc68 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007febd562d6d4 RCX: 0000000000454879 RDX: 0000000000000157 RSI: 0000000020000180 RDI: 0000000000000014 RBP: 000000000072bea0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000000006b0 R14: 00000000006fc120 R15: 0000000000000000 Code: 90 90 90 90 90 90 90 48 89 f8 48 83 fa 20 0f 82 03 01 00 00 48 39 fe 7d 0f 49 89 f0 49 01 d0 49 39 f8 0f 8f 9f 00 00 00 48 89 d1 <f3> a4 c3 48 81 fa a8 02 00 00 72 05 40 38 fe 74 3b 48 83 ea 20 RIP: __memmove+0x24/0x1a0 arch/x86/lib/memmove_64.S:43 RSP: ffff8801cc046e28 CR2: ffff8801cccb8000 ==== We don't need to copy headers for packets which do not have preceding headers of vlan headers, so skip memmove() in that case. Fixes: 4bbb3e0e ("net: Fix vlan untag for bridge and vlan_dev with reorder_hdr off") Reported-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by:
-
Vinayak Menon authored
[ Upstream commit 914b6dff ] A crash is observed when kmemleak_scan accesses the object->pointer, likely due to the following race. TASK A TASK B TASK C kmemleak_write (with "scan" and NOT "scan=on") kmemleak_scan() create_object kmem_cache_alloc fails kmemleak_disable kmemleak_do_cleanup kmemleak_free_enabled = 0 kfree kmemleak_free bails out (kmemleak_free_enabled is 0) slub frees object->pointer update_checksum crash - object->pointer freed (DEBUG_PAGEALLOC) kmemleak_do_cleanup waits for the scan thread to complete, but not for direct call to kmemleak_scan via kmemleak_write. So add a wait for kmemleak_scan completion before disabling kmemleak_free, and while at it fix the comment on stop_scan_thread. [vinmenon@codeaurora.org: fix stop_scan_thread comment] Link: http://lkml.kernel.org/r/1522219972-22809-1-git-send-email-vinmenon@codeaurora.org Link: http://lkml.kernel.org/r/1522063429-18992-1-git-send-email-vinmenon@codeaurora.orgSigned-off-by:
Vinayak Menon <vinmenon@codeaurora.org> Reviewed-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Jan Kiszka authored
[ Upstream commit f8437520 ] Since d5d332d3, a couple of links in scripts/dtc/include-prefixes are additionally required in order to build device trees with the header package. Signed-off-by:
Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by:
Riku Voipio <riku.voipio@linaro.org> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Cong Wang authored
[ Upstream commit b85ab56c ] llc_conn_send_pdu() pushes the skb into write queue and calls llc_conn_send_pdus() to flush them out. However, the status of dev_queue_xmit() is not returned to caller, in this case, llc_conn_state_process(). llc_conn_state_process() needs hold the skb no matter success or failure, because it still uses it after that, therefore we should hold skb before dev_queue_xmit() when that skb is the one being processed by llc_conn_state_process(). For other callers, they can just pass NULL and ignore the return value as they are. Reported-by:
Noam Rathaus <noamr@beyondsecurity.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Stephane Eranian authored
[ Upstream commit 71eb9ee9 ] this patch fix a bug in how the pebs->real_ip is handled in the PEBS handler. real_ip only exists in Haswell and later processor. It is actually the eventing IP, i.e., where the event occurred. As opposed to the pebs->ip which is the PEBS interrupt IP which is always off by one. The problem is that the real_ip just like the IP needs to be fixed up because PEBS does not record all the machine state registers, and in particular the code segement (cs). This is why we have the set_linear_ip() function. The problem was that set_linear_ip() was only used on the pebs->ip and not the pebs->real_ip. We have profiles which ran into invalid callstacks because of this. Here is an example: ..... 0: ffffffffffffff80 recent entry, marker kernel v ..... 1: 000000000040044d <= user address in kernel space! ..... 2: fffffffffffffe00 marker enter user v ..... 3: 000000000040044d ..... 4: 00000000004004b6 oldest entry Debugging output in get_perf_callchain(): [ 857.769909] CALLCHAIN: CPU8 ip=40044d regs->cs=10 user_mode(regs)=0 The problem is that the kernel entry in 1: points to a user level address. How can that be? The reason is that with PEBS sampling the instruction that caused the event to occur and the instruction where the CPU was when the interrupt was posted may be far apart. And sometime during that time window, the privilege level may change. This happens, for instance, when the PEBS sample is taken close to a kernel entry point. Here PEBS, eventing IP (real_ip) captured a user level instruction. But by the time the PMU interrupt fired, the processor had already entered kernel space. This is why the debug output shows a user address with user_mode() false. The problem comes from PEBS not recording the code segment (cs) register. The register is used in x86_64 to determine if executing in kernel vs user space. This is okay because the kernel has a software workaround called set_linear_ip(). But the issue in setup_pebs_sample_data() is that set_linear_ip() is never called on the real_ip value when it is available (Haswell and later) and precise_ip > 1. This patch fixes this problem and eliminates the callchain discrepancy. The patch restructures the code around set_linear_ip() to minimize the number of times the IP has to be set. Signed-off-by:
Stephane Eranian <eranian@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: kan.liang@intel.com Link: http://lkml.kernel.org/r/1521788507-10231-1-git-send-email-eranian@google.comSigned-off-by:
-
Pawel Dembicki authored
[ Upstream commit 74398925 ] BroadMobi BM806U is an Qualcomm MDM9225 based 3G/4G modem. Tested hardware BM806U is mounted on D-Link DWR-921-C3 router. The USB id is added to qmi_wwan.c to allow QMI communication with the BM806U. Tested on 4.14 kernel and OpenWRT. Signed-off-by:
Pawel Dembicki <paweldembicki@gmail.com> Signed-off-by:
-
Jinbum Park authored
[ Upstream commit 73b9160d ] Define vdso_start, vdso_end as array to avoid compile-time analysis error for the case of built with CONFIG_FORTIFY_SOURCE. and, since vdso_start, vdso_end are used in vdso.c only, move extern-declaration from vdso.h to vdso.c. If kernel is built with CONFIG_FORTIFY_SOURCE, compile-time error happens at this code. - if (memcmp(&vdso_start, "177ELF", 4)) The size of "&vdso_start" is recognized as 1 byte, but n is 4, So that compile-time error is reported. Acked-by:
Jinbum Park <jinb.park7@gmail.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Linus Lüssing authored
[ Upstream commit a752c0a4 ] DHCP connectivity issues can currently occur if the following conditions are met: 1) A DHCP packet from a client to a server 2) This packet has a multicast destination 3) This destination has a matching entry in the translation table (FF:FF:FF:FF:FF:FF for IPv4, 33:33:00:01:00:02/33:33:00:01:00:03 for IPv6) 4) The orig-node determined by TT for the multicast destination does not match the orig-node determined by best-gateway-selection In this case the DHCP packet will be dropped. The "gateway-out-of-range" check is supposed to only be applied to unicasted DHCP packets to a specific DHCP server. In that case dropping the the unicasted frame forces the client to retry via a broadcasted one, but now directed to the new best gateway. A DHCP packet with broadcast/multicast destination is already ensured to always be delivered to the best gateway. Dropping a multicasted DHCP packet here will only prevent completing DHCP as there is no other fallback. So far, it seems the unicast check was implicitly performed by expecting the batadv_transtable_search() to return NULL for multicast destinations. However, a multicast address could have always ended up in the translation table and in fact is now common. To fix this potential loss of a DHCP client-to-server packet to a multicast address this patch adds an explicit multicast destination check to reliably bail out of the gateway-out-of-range check for such destinations. The issue and fix were tested in the following three node setup: - Line topology, A-B-C - A: gateway client, DHCP client - B: gateway server, hop-penalty increased: 30->60, DHCP server - C: gateway server, code modifications to announce FF:FF:FF:FF:FF:FF Without this patch, A would never transmit its DHCP Discover packet due to an always "out-of-range" condition. With this patch, a full DHCP handshake between A and B was possible again. Fixes: be7af5cf ("batman-adv: refactoring gateway handling code") Signed-off-by:
Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
-
Linus Lüssing authored
[ Upstream commit f8fb3419 ] For multicast frames AP isolation is only supposed to be checked on the receiving nodes and never on the originating one. Furthermore, the isolation or wifi flag bits should only be intepreted as such for unicast and never multicast TT entries. By injecting flags to the multicast TT entry claimed by a single target node it was verified in tests that this multicast address becomes unreachable, leading to packet loss. Omitting the "src" parameter to the batadv_transtable_search() call successfully skipped the AP isolation check and made the target reachable again. Fixes: 1d8ab8d3 ("batman-adv: Modified forwarding behaviour for multicast packets") Signed-off-by:
-
Masami Hiramatsu authored
[ Upstream commit dfa453bc ] Add a testcase for probe point definition. This tests symbol, address and symbol+offset syntax. The offset must be positive and smaller than UINT_MAX. Link: http://lkml.kernel.org/r/152129043097.31874.14273580606301767394.stgit@devboxSigned-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Masami Hiramatsu authored
[ Upstream commit 5fbdbed7 ] Add a testcase for string type with kprobe event. This tests good/bad syntax combinations and also the traced data is correct in several way. Link: http://lkml.kernel.org/r/152129038381.31874.9201387794548737554.stgit@devboxSigned-off-by:
-
Masami Hiramatsu authored
[ Upstream commit 871bef20 ] Add a testcase for probe event argument syntax which ensures the kprobe_events interface correctly parses given event arguments. Link: http://lkml.kernel.org/r/152129033679.31874.12705519603869152799.stgit@devboxSigned-off-by:
-
David Rientjes authored
[ Upstream commit 9d3c3354 ] Commit 25160354 ("mm, thp: remove __GFP_NORETRY from khugepaged and madvised allocations") changed the page allocator to no longer detect thp allocations based on __GFP_NORETRY. It did not, however, modify the mem cgroup try_charge() path to avoid oom kill for either khugepaged collapsing or thp faulting. It is never expected to oom kill a process to allocate a hugepage for thp; reclaim is governed by the thp defrag mode and MADV_HUGEPAGE, but allocations (and charging) should fallback instead of oom killing processes. Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1803191409420.124411@chino.kir.corp.google.com Fixes: 25160354 ("mm, thp: remove __GFP_NORETRY from khugepaged and madvised allocations") Signed-off-by:
David Rientjes <rientjes@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
-
Yisheng Xie authored
[ Upstream commit 8970a63e ] Alexander reported a use of uninitialized memory in __mpol_equal(), which is caused by incorrect use of preferred_node. When mempolicy in mode MPOL_PREFERRED with flags MPOL_F_LOCAL, it uses numa_node_id() instead of preferred_node, however, __mpol_equal() uses preferred_node without checking whether it is MPOL_F_LOCAL or not. [akpm@linux-foundation.org: slight comment tweak] Link: http://lkml.kernel.org/r/4ebee1c2-57f6-bcb8-0e2d-1833d1ee0bb7@huawei.com Fixes: fc36b8d3 ("mempolicy: use MPOL_F_LOCAL to Indicate Preferred Local Policy") Signed-off-by:
Yisheng Xie <xieyisheng1@huawei.com> Reported-by:
Alexander Potapenko <glider@google.com> Tested-by:
-
Kalderon, Michal authored
[ Upstream commit b15606f4 ] Return code wasn't set properly when CNQ allocation failed. This only affect error message logging, currently user will receive an error message that says the qedr driver load failed with rc '0', instead of ENOMEM Fixes: ec72fce4 ("qedr: Add support for RoCE HW init") Signed-off-by:
Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by:
Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Kalderon, Michal authored
[ Upstream commit c3594f22 ] QPs that were configured with ack timeout value lower than 1 msec will not implement re-transmission timeout. This means that if a packet / ACK were dropped, the QP will not retransmit this packet. This can lead to an application hang. Fixes: cecbcddf ("qedr: Add support for QP verbs") Signed-off-by:
-
Chien Tin Tung authored
[ Upstream commit 5f3e3b85 ] The option size check is using optval instead of optlen causing the set option call to fail. Use the correct field, optlen, for size check. Fixes: 6a21dfc0 ("RDMA/ucma: Limit possible option size") Signed-off-by:
Chien Tin Tung <chien.tin.tung@intel.com> Signed-off-by:
Shiraz Saleem <shiraz.saleem@intel.com> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Nicolas Pitre authored
[ Upstream commit 825d4875 ] Some filesystems have timestamps with coarse precision that may allow for a recently built object file to have the same timestamp as the updated time on one of its dependency files. When that happens, the object file doesn't get rebuilt as it should. This is especially the case on filesystems that don't have sub-second time precision, such as ext3 or Ext4 with 128B inodes. Let's prevent that by making sure updated dependency files have a newer timestamp than the first file we created (i.e. autoksyms.h.tmpnew). Reported-by:
Thomas Lindroth <thomas.lindroth@gmail.com> Signed-off-by:
Nicolas Pitre <nico@linaro.org> Tested-by:
-
Stefan Wahren authored
[ Upstream commit 9b9322db ] The commit "regulatory: add NUL to request alpha2" increases the length of alpha2 to 3. This causes a regression on brcmfmac, because brcmf_cfg80211_reg_notifier() expect valid ISO3166 codes in the complete array. So fix this accordingly. Fixes: 657308f7 ("regulatory: add NUL to request alpha2") Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Acked-by:
Franky Lin <franky.lin@broadcom.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Song Liu authored
[ Upstream commit c917e0f2 ] When a perf_event is attached to parent cgroup, it should count events for all children cgroups: parent_group <---- perf_event \ - child_group <---- process(es) However, in our tests, we found this perf_event cannot report reliable results. Here is an example case: # create cgroups mkdir -p /sys/fs/cgroup/p/c # start perf for parent group perf stat -e instructions -G "p" # on another console, run test process in child cgroup: stressapptest -s 2 -M 1000 & echo $! > /sys/fs/cgroup/p/c/cgroup.procs # after the test process is done, stop perf in the first console shows <not counted> instructions p The instruction should not be "not counted" as the process runs in the child cgroup. We found this is because perf_event->cgrp and cpuctx->cgrp are not identical, thus perf_event->cgrp are not updated properly. This patch fixes this by updating perf_cgroup properly for ancestor cgroup(s). Reported-by:
Ephraim Park <ephiepark@fb.com> Signed-off-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <jolsa@redhat.com> Cc: <kernel-team@fb.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/20180312165943.1057894-1-songliubraving@fb.comSigned-off-by:
-
Stefano Brivio authored
[ Upstream commit 03080e5e ] Don't hardcode a MTU value on vti tunnel initialization, ip_tunnel_newlink() is able to deal with this already. See also commit ffc2b6ee ("ip_gre: fix IFLA_MTU ignored on NEWLINK"). Fixes: 1181412c ("net/ipv4: VTI support new module for ip_vti.") Signed-off-by:
Stefano Brivio <sbrivio@redhat.com> Acked-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Stefano Brivio authored
[ Upstream commit dd1df247 ] This re-introduces the effect of commit a3245236 ("vti4: Don't count header length twice.") which was accidentally reverted by merge commit f895f0cf ("Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec"). The commit message from Steffen Klassert said: We currently count the size of LL_MAX_HEADER and struct iphdr twice for vti4 devices, this leads to a wrong device mtu. The size of LL_MAX_HEADER and struct iphdr is already counted in ip_tunnel_bind_dev(), so don't do it again in vti_tunnel_init(). And this is still the case now: ip_tunnel_bind_dev() already accounts for the header length of the link layer (not necessarily LL_MAX_HEADER, if the output device is found), plus one IP header. For example, with a vti device on top of veth, with MTU of 1500, the existing implementation would set the initial vti MTU to 1332, accounting once for LL_MAX_HEADER (128, included in hard_header_len by vti) and twice for the same IP header (once from hard_header_len, once from ip_tunnel_bind_dev()). It should instead be 1480, because ip_tunnel_bind_dev() is able to figure out that the output device is veth, so no additional link layer header is attached, and will properly count one single IP header. The existing issue had the side effect of avoiding PMTUD for most xfrm policies, by arbitrarily lowering the initial MTU. However, the only way to get a consistent PMTU value is to let the xfrm PMTU discovery do its course, and commit d6af1a31 ("vti: Add pmtu handling to vti_xmit.") now takes care of local delivery cases where the application ignores local socket notifications. Fixes: b9959fd3 ("vti: switch to new ip tunnel code") Fixes: f895f0cf ("Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec") Signed-off-by:
-
Sven Eckelmann authored
[ Upstream commit fc04fdb2 ] batadv_check_unicast_ttvn may redirect a packet to itself or another originator. This involves rewriting the ttvn and the destination address in the batadv unicast header. These field were not yet pulled (with skb rcsum update) and thus any change to them also requires a change in the receive checksum. Reported-by:
Matthias Schiffer <mschiffer@universe-factory.net> Fixes: a73105b8 ("batman-adv: improved client announcement mechanism") Signed-off-by:
-
Matthias Schiffer authored
[ Upstream commit 6f27d2c2 ] Checking for 0 is insufficient: when an SKB without a batadv header, but with a VLAN header is received, hdr_size will be 4, making the following code interpret the Ethernet header as a batadv header. Fixes: be1db4f6 ("batman-adv: make the Distributed ARP Table vlan aware") Signed-off-by:
-
Toshiaki Makita authored
[ Upstream commit 4bbb3e0e ] When we have a bridge with vlan_filtering on and a vlan device on top of it, packets would be corrupted in skb_vlan_untag() called from br_dev_xmit(). The problem sits in skb_reorder_vlan_header() used in skb_vlan_untag(), which makes use of skb->mac_len. In this function mac_len is meant for handling rx path with vlan devices with reorder_header disabled, but in tx path mac_len is typically 0 and cannot be used, which is the problem in this case. The current code even does not properly handle rx path (skb_vlan_untag() called from __netif_receive_skb_core()) with reorder_header off actually. In rx path single tag case, it works as follows: - Before skb_reorder_vlan_header() mac_header data v v +-------------------+-------------+------+---- | ETH | VLAN | ETH | | ADDRS | TPID | TCI | TYPE | +-------------------+-------------+------+---- <-------- mac_len ---------> <-------------> to be removed - After skb_reorder_vlan_header() mac_header data v v +-------------------+------+---- | ETH | ETH | | ADDRS | TYPE | +-------------------+------+---- <-------- mac_len ---------> This is ok, but in rx double tag case, it corrupts packets: - Before skb_reorder_vlan_header() mac_header data v v +-------------------+-------------+-------------+------+---- | ETH | VLAN | VLAN | ETH | | ADDRS | TPID | TCI | TPID | TCI | TYPE | +-------------------+-------------+-------------+------+---- <--------------- mac_len ----------------> <-------------> should be removed <---------------------------> actually will be removed - After skb_reorder_vlan_header() mac_header data v v +-------------------+------+---- | ETH | ETH | | ADDRS | TYPE | +-------------------+------+---- <--------------- mac_len ----------------> So, two of vlan tags are both removed while only inner one should be removed and mac_header (and mac_len) is broken. skb_vlan_untag() is meant for removing the vlan header at (skb->data - 2), so use skb->data and skb->mac_header to calculate the right offset. Reported-by:
Brandon Carpenter <brandon.carpenter@cypherpath.com> Fixes: a6e18ff1 ("vlan: Fix untag operations of stacked vlans with REORDER_HEADER off") Signed-off-by:
-
Lucas Stach authored
[ Upstream commit 6a055b92 ] Right now the vblank event completion is racing with the atomic update, which is especially bad when the PRE is in use, as one of the hardware issue workaround might extend the atomic commit for quite some time. If the vblank IRQ happens to trigger during that time, we will prematurely signal the atomic commit completion to userspace, which causes tearing when userspace re-uses a framebuffer we haven't managed to flip away from yet. Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Cathy Zhou authored
[ Upstream commit cf55612a ] The NETIF_F_GSO_SOFTWARE implies support for GSO on SCTP, but the sunvnet driver does not support GSO for sctp. Here we remove the NETIF_F_GSO_SOFTWARE feature flag and only report NETIF_F_ALL_TSO instead. Signed-off-by:
Cathy Zhou <Cathy.Zhou@Oracle.COM> Signed-off-by:
Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by:
-
Sabrina Dubroca authored
[ Upstream commit d52e5a7e ] Prior to the rework of PMTU information storage in commit 2c8cec5c ("ipv4: Cache learned PMTU information in inetpeer."), when a PMTU event advertising a PMTU smaller than net.ipv4.route.min_pmtu was received, we would disable setting the DF flag on packets by locking the MTU metric, and set the PMTU to net.ipv4.route.min_pmtu. Since then, we don't disable DF, and set PMTU to net.ipv4.route.min_pmtu, so the intermediate router that has this link with a small MTU will have to drop the packets. This patch reestablishes pre-2.6.39 behavior by splitting rtable->rt_pmtu into a bitfield with rt_mtu_locked and rt_pmtu. rt_mtu_locked indicates that we shouldn't set the DF bit on that path, and is checked in ip_dont_fragment(). One possible workaround is to set net.ipv4.route.min_pmtu to a value low enough to accommodate the lowest MTU encountered. Fixes: 2c8cec5c ("ipv4: Cache learned PMTU information in inetpeer.") Signed-off-by:
-
Arvind Yadav authored
[ Upstream commit 537f4146 ] Never directly free @dev after calling device_register(), even if it returned an error! Always use put_device() to give up the reference initialized in this function instead. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Michael Chan authored
[ Upstream commit 3c4fe80b ] During initialization, if we encounter errors, there is a code path that calls bnxt_hwrm_vnic_set_tpa() with invalid VNIC ID. This may cause a warning in firmware logs. Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Florian Westphal authored
[ Upstream commit 932909d9 ] The last rule in the blob has next_entry offset that is same as total size. This made "ebtables32 -A OUTPUT -d de:ad:be:ef:01:02" fail on 64 bit kernel. Fixes: b7181216 ("netfilter: ebtables: CONFIG_COMPAT: don't trust userland offsets") Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Gregory CLEMENT authored
[ Upstream commit 3cd2c313 ] On the CP110 components which are present on the Armada 7K/8K SoC we need to explicitly enable the clock for the registers. However it is not needed for the AP8xx component, that's why this clock is optional. With this patch both clock have now a name, but in order to be backward compatible, the name of the first clock is not used. It allows to still use this clock with a device tree using the old binding. Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Marc Zyngier authored
[ Upstream commit e21da1c9 ] A recent update to the ARM SMCCC ARCH_WORKAROUND_1 specification allows firmware to return a non zero, positive value to describe that although the mitigation is implemented at the higher exception level, the CPU on which the call is made is not affected. Let's relax the check on the return value from ARCH_WORKAROUND_1 so that we only error out if the returned value is negative. Fixes: b092201e ("arm64: Add ARM_SMCCC_ARCH_WORKAROUND_1 BP hardening support") Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
