- 14 Apr, 2021 18 commits
-
-
Lucas De Marchi authored
Make them independent so we can use DGFX_FEATURES more generically. For future platforms that do not use the GEN nomenclature we will define graphics, media and display separately, so we avoid setting graphics_ver with the GEN() macro. Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
Lucas De Marchi authored
Since we are now converting from a single gen version to graphics_ver, media_ver and display_ver, add the last 2 when printing the device info. Reviewed-by:
-
Lucas De Marchi authored
Now that it's not being used anymore, finish its removal. Like for gen_mask, we replace INTEL_GEN() and IS_GEN() macros to use the new field. Reviewed-by:
-
Lucas De Marchi authored
Replace gen with the new graphics_ver value and use GRAPHICS_VER() in those places. Reviewed-by:
-
Lucas De Marchi authored
Now that it's not used anywhere, remove it from struct intel_device_info. To allow a period in which code will be converted to the new macro, keep IS_GEN_RANGE() around, just redefining it to use the new fields. The size advantage from IS_GEN_RANGE() using a mask is not that big as it has pretty limited use througout the driver: text data bss dec hex filename 2758497 95965 6496 2860958 2ba79e drivers/gpu/drm/i915/i915.ko.old 2758586 95953 6496 2861035 2ba7eb drivers/gpu/drm/i915/i915.ko.new Reviewed-by:
-
Lucas De Marchi authored
Remove the remaining uses of INTEL_GEN_MASK() and the correspondent gen_mask in struct intel_device_info. This will allow the removal of gen_mask later since it's incompatible with the new per-IP versioning scheme. Reviewed-by:
-
Lucas De Marchi authored
Since its introduction 2 years ago, we never used the mask to span more than one gen. Replace gen_mask a single number and start using the new GRAPHICS_VER(). Reviewed-by:
-
Lucas De Marchi authored
Start using the new fields graphics_version for the previous gen checks. Here we rename the "gen" field and replace the comparisons using it to start using the new GRAPHICS_VER(). Other uses of INTEL_GEN() were left as is for automatic conversion later. Reviewed-by:
-
Lucas De Marchi authored
Like it was done in commit 01eb15c9 ("drm/i915: Add DISPLAY_VER() and related macros") add the correspondent macros for graphics and media. Going forward we will prefer checking the versions for the specific IPs (graphics, media and display) rather than grouping everything under a "gen" version. For consistency and to make the maintenance easier, it'd be preferred not to mix the *GEN* macros with the new ones. For older platforms we can simply consider that the previous "gen" number will extend to all 3 IPs. Then we can start replacing its use in the driver. Right now this replacement is not done and only the infrastructure is put in place. We also leave gen and gen_mask inside struct intel_device_info while it's still being used throughout the code. v2: Repurpose IS_{GRAPHICS,MEDIA}_VER() macros to work with a range Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Reviewed-by:
-
Lucas De Marchi authored
While converting the rest of the driver to use GRAPHICS_VER() and MEDIA_VER(), following what was done for display, some discussions went back on what we did for display: 1) Why is the == comparison special that deserves a separate macro instead of just getting the version and comparing directly like is done for >, >=, <=? 2) IS_DISPLAY_RANGE() is weird in that it omits the "_VER" for brevity. If we remove the current users of IS_DISPLAY_VER(), we could actually repurpose it for a range check With (1) there could be an advantage if we used gen_mask since multiple conditionals be combined by the compiler in a single and instruction and check the result. However a) INTEL_GEN() doesn't use the mask since it would make the code bigger everywhere else and b) in the cases it made sense, it also made sense to convert to the _RANGE() variant. So here we repurpose IS_DISPLAY_VER() to work with a [ from, to ] range like was the IS_DISPLAY_RANGE() and convert the current IS_DISPLAY_VER() users to use == and != operators. Aside from the definition changes, this was done by the following semantic patch: @@ expression dev_priv, E1; @@ - !IS_DISPLAY_VER(dev_priv, E1) + DISPLAY_VER(dev_priv) != E1 @@ expression dev_priv, E1; @@ - IS_DISPLAY_VER(dev_priv, E1) + DISPLAY_VER(dev_priv) == E1 @@ expression dev_priv, from, until; @@ - IS_DISPLAY_RANGE(dev_priv, from, until) + IS_DISPLAY_VER(dev_priv, from, until) Cc: Jani Nikula <jani.nikula@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
-
Lucas De Marchi authored
The macro we use to check is called DISPLAY_VER(). While using this macro and the new ones being added in following changes I made the mistake multiple times when mixing both "ver" and "version". Although it's usually better to prefer the complete name, the shorhand DISPLAY_VER() / GRAPHICS_VER / MEDIA_VER are clear and cause less visual polution. Another issue is when copying the variable to other places. "display.version" would be copied to a "display_version" variable which is long and would make people abbreviate as "version", or "display_ver". In the first case it's not always clear what version refers to, and in the second case it just hints it should be the name in the first place. So, in the same way use used "gen" rather than "generation", use "ver" instead of "version". Signed-off-by:
-
Lucas De Marchi authored
Commit 989634fb ("drm/i915/audio: set HDA link parameters in driver") added INTEL_GEN() in the display code, where it should actually be using DISPLAY_VER(). Switch to the new macro. Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by:
-
Ville Syrjälä authored
Now that glk display version is 10 we can drop a few more glk checks. Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Ville Syrjälä authored
Just let bxt/glk fall back to intel_hpd_pin_default() instead of using skl_hpd_pin() or cnl_hpd_pin(). Doesn't really matter since both functions will end up returning the correct hpd pin anyway, but I find it a bit less confusing when bxt/glk are fully separated from the logic for the other platforms. Reviewed-by:
-
Ville Syrjälä authored
The glk display version change is causing us to again attempt LTTPR detection on glk. We must not do tha since glk doesn't have a long enough AUX timeout. Restore the correct logic to skip the detection. Cc: Matt Roper <matthew.d.roper@intel.com> Fixes: 2b5a4562 ("drm/i915/display: Simplify GLK display version tests") Reviewed-by:
-
Ville Syrjälä authored
We lost a CCS related w/a on glk when the display version became 10 instead of 9. Restore the correct check. Cc: Matt Roper <matthew.d.roper@intel.com> Fixes: 2b5a4562 ("drm/i915/display: Simplify GLK display version tests") Reviewed-by:
-
Ville Syrjälä authored
We lost the FBC 16bpp 512byte stride requirement on glk when we switched from display version 9 to 10. Restore the w/a to avoid enabling FBC with a bad stride and thus display garbage. Cc: Matt Roper <matthew.d.roper@intel.com> Fixes: 2b5a4562 ("drm/i915/display: Simplify GLK display version tests") Reviewed-by:
-
Matt Roper authored
Now that we've eliminated INTEL_GEN(), IS_GEN_RANGE(), etc. from the display code, we should also kill off our use of the IS_GEN9_* macros too. We'll do the conversion manually this time instead of using Coccinelle since the most logical substitution can depend heavily on the code context, and sometimes we can keep the code simpler if we make additional adjustments such as swapping the order of if/else arms. v2: - Restore a lost negation in intel_pll_is_valid(). Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210407203945.1432531-1-matthew.d.roper@intel.com (cherry picked from commit 70bfb307) [Jani: cherry picked to topic branch to reduce conflicts] Signed-off-by:
-
- 08 Apr, 2021 3 commits
-
-
git://anongit.freedesktop.org/drm/drm-intelDave Airlie authored
Features: - Add support for FBs requiring a power-of-two stride padding (Imre) Refactoring: - Disassociate display version from gen (Matt) - Refactor legacy DP and HDMI code to separate files (Ville) - Refactor FB plane code to a separate file (Imre) - Refactor VBT child device info parsing and usage (Jani) - Refactor KBL/TGL/ADL-S display and gt stepping schemes (Jani) Fixes: - DP Link-Training Tunable PHY Repeaters (LTTPR) fixes (Imre) - HDCP fixes (Anshuman) - DP 2.0 HDMI 2.1 PCON Fixed Rate Link (FRL) fixes (Ankit) - Set HDA link parameters in driver (Kai) - Fix enabled_planes bitmask (Ville) - Fix transposed arguments to skl_plane_wm_level() (Ville) - Stop adding planes to the commit needlessly (Ville) Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87v996ml17.fsf@intel.com
-
Dave Airlie authored
Merge tag 'drm-intel-gt-next-2021-04-06' of git://anongit.freedesktop.org/drm/drm-intel into drm-next Driver Changes: - Prepare for local/device memory support on DG1 by starting to use it for kernel internal allocations: context, ring and engine scratch (Matt A, CQ, Abdiel, Imre) - Sandybridge fix to avoid hard hang on ring resume (Chris) - Limit imported dma-buf size to int32 (Matt A) - Double check heartbeat timeout before resetting (Chris) - Use new tasklet API for execution list (Emil) - Fix SPDX checkpats warnings (Chris) - Fixes for various checkpatch warnings (Chris) - Selftest improvements (Chris) - Move the defer_request waiter active assertion to correct spot (Chris) - Make local-memory probing a GT operation (Matt, Tvrtko) - Protect against request freeing during cancellation on wedging (Chris) - Retire unexpected starting state error dumping (Chris) - Distinction of memory regions in debugging (Zbigniew) - Always flush the submission queue on checking for idle (Chris) - Consolidate 2big error check to helper (Matt) - Decrease number of subplatform bits (Tvrtko) - Remove unused internal request priority levels (Chris) - Document the unused internal header bits in buddy allocator (Matt) - Cleanup the region class/instance encoding (Matt) Signed-off-by:
-
Dave Airlie authored
Merge tag 'mediatek-drm-next-5.13' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next Mediatek DRM Next for Linux 5.13 1. Fine tune the line time for EOTp. 2. Add support mt8192 dpi. 3. Make crtc config-updating atomic. 4. Don't support hdmi connector creation. From: Chun-Kuang Hu <chunkuang.hu@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210405082248.3578-1-chunkuang.hu@kernel.orgSigned-off-by:
-
- 07 Apr, 2021 1 commit
-
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for 5.13: UAPI Changes: Cross-subsystem Changes: Core Changes: - mst: Improve topology logging - edid: Rework and improvements for displayid Driver Changes: - anx7625: Regulators support - bridge: Support for the Chipone ICN6211, Lontium LT8912B - lt9611: Fix 4k panels handling Signed-off-by:
-
- 01 Apr, 2021 4 commits
-
-
Dafna Hirschfeld authored
commit f0119514 ("drm/mediatek: mtk_dpi: Create connector for bridges") broke the display support for elm device since mtk_dpi calls drm_bridge_attach with the flag DRM_BRIDGE_ATTACH_NO_CONNECTOR while mtk_hdmi does not yet support this flag. Fix this by accepting DRM_BRIDGE_ATTACH_NO_CONNECTOR in bridge attachment. Implement the drm_bridge_funcs .detect() and .get_edid() operations, and call drm_bridge_hpd_notify() to report HPD. This provides the necessary API to support disabling connector creation. In addition, the field 'conn' is removed from the mtk_hdmi struct since mtk_hdmi don't create a connector. It is replaced with a pointer 'curr_conn' that points to the current connector which can be access through the global state. This patch is inspired by a similar patch for bridge/synopsys/dw-hdmi.c: commit ec971aaa ("drm: bridge: dw-hdmi: Make connector creation optional") But with the difference that in mtk-hdmi only the option of not creating a connector is supported. Fixes: f0119514 ("drm/mediatek: mtk_dpi: Create connector for bridges") Signed-off-by:
Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Chun-Kuang Hu <chunkuang.hu@kernel.org>
-
Dafna Hirschfeld authored
The bridge operation '.enable' and the audio cb '.get_eld' access hdmi->conn. In the future we will want to support the flag DRM_BRIDGE_ATTACH_NO_CONNECTOR and then we will not have direct access to the connector. The atomic version '.atomic_enable' allows accessing the current connector from the state. This patch switches the bridge to the atomic version to prepare access to the connector in later patches. Signed-off-by:
-
Hsin-Yi Wang authored
When suspending the driver, anx7625_power_standby() will be called to turn off reset-gpios and enable-gpios. However, power supplies are not disabled. To save power, the driver can get the power supply regulators and turn off them in anx7625_power_standby(). Signed-off-by:
Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by:
Robert Foss <robert.foss@linaro.org> Reviewed-by:
Xin Ji <xji@analogixsemi.com> Signed-off-by:
-
Hsin-Yi Wang authored
anx7625 requires 3 power supply regulators. Signed-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
-
- 31 Mar, 2021 14 commits
-
-
Dave Airlie authored
Merge tag 'exynos-drm-next-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next One cleanup - Based on the patch[1], clean up the use of request_irq function series. [1] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next-history.git/commit/?id=cbe16f35bee6880becca6f20d2ebf6b457148552Signed-off-by:
-
ssh://git.freedesktop.org/git/drm/drmDave Airlie authored
special i915-gem-next pull as requested - Conversion to dma_resv_locking, obj->mm.lock is gone (Maarten, with help from Thomas Hellström) - watchdog (Tvrtko, one patch to cancel individual request from Chris) - legacy ioctl cleanup (Jason+Ashutosh) - i915-gem TODO and RFC process doc (me) - i915_ prefix for vma_lookup (Liam Howlett) just because I spotted it and put it in here too Signed-off-by:
-
Imre Deak authored
Fix the Documentation/gpu/i915:22: /drivers/gpu/drm/i915/intel_runtime_pm.c:423: WARNING: Inline strong start-string without end-string. warning from the htmldocs build. Fixes: 9d58aa46 ("drm/i915: Fix the GT fence revocation runtime PM logic") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Imre Deak <imre.deak@intel.com> Acked-by:
Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20210330150118.1105079-1-imre.deak@intel.com
-
Jani Nikula authored
Avoid any confusion with High Dynamic Range. No functional changes. Reviewed-by:
-
Jani Nikula authored
The DisplayID specifications explicitly call out 0 as a valid payload length for data blocks. The mere presence of a data block, or the information coded in the block specific data (bits 7:3 in offset 1), may be enough to convey the necessary information. Reviewed-by:
-
Jani Nikula authored
Neatly reduce displayid boilerplate in code. Remove excessive debug logging while at it, no other functional changes. The old displayid iterator becomes unused; remove it as well as make drm_find_displayid_extension() static. Reviewed-by:
-
Jani Nikula authored
Neatly reduce displayid boilerplate in code. No functional changes. Reviewed-by:
-
Jani Nikula authored
Neatly reduce displayid boilerplate in code. No functional changes. Reviewed-by:
-
Jani Nikula authored
Iterating DisplayID blocks across sections (in EDID extensions) is unnecessarily complicated for the caller. Implement DisplayID iterators to go through all blocks in all sections. Usage example: const struct displayid_block *block; struct displayid_iter iter; displayid_iter_edid_begin(edid, &iter); displayid_iter_for_each(block, &iter) { /* operate on block */ } displayid_iter_end(&iter); When DisplayID is stored in EDID extensions, the DisplayID sections map to extensions as described in VESA DisplayID v1.3 Appendix B: DisplayID as an EDID Extension. This is implemented here. When DisplayID is stored in its dedicated DDC device 0xA4, according to VESA E-DDC v1.3, different rules apply for the structure. This is not implemented here, as we don't currently use it, but the idea is you'd have a different call for beginning the iteration, for example simply: displayid_iter_begin(displayid, &iter); instead of displayid_iter_edid_begin(), and everything else would be hidden away in the iterator functions. v2: - sizeof(struct displayid_block) -> sizeof(*block) (Ville) - remove __ prefix from displayid_iter_block Reviewed-by: -
Jani Nikula authored
We'll be adding more DisplayID specific functions going forward, so start off by splitting out a few functions to a separate file. We don't bother with exporting the functions; at least for now they should be needed solely within drm.ko. No functional changes. Reviewed-by:
-
Jani Nikula authored
If there's no need to change it, it should be const. There's more to be done, but start off with changes that make follow-up work easier. No functional changes. Reviewed-by:
-
Boris Brezillon authored
This patch adds the missing MODULE_DEVICE_TABLE definitions on different Mediatek drivers which generates correct modalias for automatic loading when these drivers are compiled as an external module. Signed-off-by:
Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by:
-
Anshuman Gupta authored
Fix LC_Send_L_Prime message timeout to 16 as documented in DP HDCP 2.2 errata page 3. https://www.digital-cp.com/sites/default/files/HDCP%202_2_DisplayPort_Errata_v3_0.pdf Cc: Ramalingam C <ramalingam.c@intel.com> Reviewed-by:
Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by:
Anshuman Gupta <anshuman.gupta@intel.com> Acked-by:
Maxime Ripard <mripard@kernel.org> Signed-off-by:
-
Anshuman Gupta authored
As documented in HDCP 2.2 DP Errata spec transmitter should abort the authentication protocol in case transmitter has not received the entire {AKE_Send_Cert, AKE_Send_H_prime, AKE_Send_Paring_Info} msg within {110,7,5} miliseconds. Adding above msg timeout values and aborting the HDCP authentication in case it timedout to read entire msg. https://www.digital-cp.com/sites/default/files/HDCP%202_2_DisplayPort_Errata_v3_0.pdf v2: - Removed redundant variable msg_can_timedout. [Ankit] Cc: Ramalingam C <ramalingam.c@intel.com> Signed-off-by:
-
