- 29 Nov, 2013 40 commits
-
-
Guenter Roeck authored
commit e41fae2b upstream. Bit 2 of status register 2 on MAX6696 (external diode 2 open) sets ALERT; the bit thus has to be listed in alert_alarms. Also display a message in the alert handler if the condition is encountered. Even though not all overtemperature conditions cause ALERT to be set, we should not ignore them in the alert handler. Display messages for all out-of-range conditions. Reported-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christoffer Dall authored
commit 40c2729b upstream. Using virt_to_phys on percpu mappings is horribly wrong as it may be backed by vmalloc. Introduce kvm_kaddr_to_phys which translates both types of valid kernel addresses to the corresponding physical address. At the same time resolves a typing issue where we were storing the physical address as a 32 bit unsigned long (on arm), truncating the physical address for addresses above the 4GB limit. This caused breakage on Keystone. Reported-by:
Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by:
Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Edwards authored
commit 27ef63c7 upstream. When determining the page size we could use to map with the IOMMU, the page size should also be aligned with the hva, not just the gfn. The gfn may not reflect the real alignment within the hugetlbfs file. Most of the time, this works fine. However, if the hugetlbfs file is backed by non-contiguous huge pages, a multi-huge page memslot starts at an unaligned offset within the hugetlbfs file, and the gfn is aligned with respect to the huge page size, kvm_host_page_size() will return the huge page size and we will use that to map with the IOMMU. When we later unpin that same memslot, the IOMMU returns the unmap size as the huge page size, and we happily unpin that many pfns in monotonically increasing order, not realizing we are spanning non-contiguous huge pages and partially unpin the wrong huge page. Ensure the IOMMU mapping page size is aligned with the hva corresponding to the gfn, which does reflect the alignment within the hugetlbfs file. Reviewed-by:
Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by:
Greg Edwards <gedwards@ddn.com> Signed-off-by:
Gleb Natapov <gleb@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kevin Hao authored
commit ab4ead02 upstream. In commit 8a4d0a68 "ftrace: Use breakpoint method to update ftrace caller", we choose to use breakpoint method to update the ftrace caller. But we also need to skip over the breakpoint in function ftrace_int3_handler() for them. Otherwise weird things would happen. Signed-off-by:
Kevin Hao <haokexin@gmail.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paolo Bonzini authored
commit daf72722 upstream. When I was looking at RHEL5.9's failure to start with unrestricted_guest=0/emulate_invalid_guest_state=1, I got it working with a slightly older tree than kvm.git. I now debugged the remaining failure, which was introduced by commit 660696d1 (KVM: X86 emulator: fix source operand decoding for 8bit mov[zs]x instructions, 2013-04-24) introduced a similar mis-emulation to the one in commit 8acb4207 (KVM: fix sil/dil/bpl/spl in the mod/rm fields, 2013-05-30). The incorrect decoding occurs in 8-bit movzx/movsx instructions whose 8-bit operand is sil/dil/bpl/spl. Needless to say, "movzbl %bpl, %eax" does occur in RHEL5.9's decompression prolog, just a handful of instructions before finally giving control to the decompressed vmlinux and getting out of the invalid guest state. Because OpMem8 bypasses decode_modrm, the same handling of the REX prefix must be applied to OpMem8. Reported-by:
Michele Baldessari <michele@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Gleb Natapov <gleb@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thomas Renninger authored
commit 11f918d3 upstream. Do it the same way as done in microcode_intel.c: use pr_debug() for missing firmware files. There seem to be CPUs out there for which no microcode update has been submitted to kernel-firmware repo yet resulting in scary sounding error messages in dmesg: microcode: failed to load file amd-ucode/microcode_amd_fam16h.bin Signed-off-by:
Thomas Renninger <trenn@suse.de> Acked-by:
Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/1384274383-43510-1-git-send-email-trenn@suse.deSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Fenghua Yu authored
commit 522e6646 upstream. In reboot and crash path, when we shut down the local APIC, the I/O APIC is still active. This may cause issues because external interrupts can still come in and disturb the local APIC during shutdown process. To quiet external interrupts, disable I/O APIC before shutdown local APIC. Signed-off-by:
Fenghua Yu <fenghua.yu@intel.com> Link: http://lkml.kernel.org/r/1382578212-4677-1-git-send-email-fenghua.yu@intel.com [ I suppose the 'issue' is a hang during shutdown. It's a fine change nevertheless. ] Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
J. Bruce Fields authored
commit 365da4ad upstream. This fixes a regression from 24750082 "nfsd4: fix decoding of compounds across page boundaries". The previous code was correct: argp->pagelist is initialized in nfs4svc_deocde_compoundargs to rqstp->rq_arg.pages, and is therefore a pointer to the page *after* the page we are currently decoding. The reason that patch nevertheless fixed a problem with decoding compounds containing write was a bug in the write decoding introduced by 5a80a54d "nfsd4: reorganize write decoding", after which write decoding no longer adhered to the rule that argp->pagelist point to the next page. Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christoph Hellwig authored
commit 987da479 upstream. Use a straight goto error label style in nfsd_setattr to make sure we always do the put_write_access call after we got it earlier. Note that the we have been failing to do that in the case nfsd_break_lease() returns an error, a bug introduced into 2.6.38 with 6a76bebe "nfsd4: break lease on nfsd setattr". Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christoph Hellwig authored
commit 818e5a22 upstream. Split out two helpers to make the code more readable and easier to verify for correctness. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jeff Layton authored
commit 6d769f1e upstream. Currently, when we try to mount and get back NFS4ERR_CLID_IN_USE or NFS4ERR_WRONGSEC, we create a new rpc_clnt and then try the call again. There is no guarantee that doing so will work however, so we can end up retrying the call in an infinite loop. Worse yet, we create the new client using rpc_clone_client_set_auth, which creates the new client as a child of the old one. Thus, we can end up with a *very* long lineage of rpc_clnts. When we go to put all of the references to them, we can end up with a long call chain that can smash the stack as each rpc_free_client() call can recurse back into itself. This patch fixes this by simply ensuring that the SETCLIENTID call will only be retried in this situation if the last attempt did not use RPC_AUTH_UNIX. Note too that with this change, we don't need the (i > 2) check in the -EACCES case since we now have a more reliable test as to whether we should reattempt. Cc: Chuck Lever <chuck.lever@oracle.com> Tested-by/Acked-by: Weston Andros Adamson <dros@netapp.com> Signed-off-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
J. Bruce Fields authored
commit 3378b7f4 upstream. Security labels in setattr calls are currently ignored because we forget to set label->len. Reported-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
J. Bruce Fields authored
commit 427d6c66 upstream. Someone noticed exportfs happily accepted exports that would later be rejected when mountd tried to give them to the kernel. Fix this. This is a regression from 4c1e1b34 "nfsd: Store ex_anon_uid and ex_anon_gid as kuids and kgids". Cc: "Eric W. Biederman" <ebiederm@xmission.com> Reported-by:
Yin.JianHong <jiyin@redhat.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Trond Myklebust authored
commit fcb63a9b upstream. Ensure that _nfs4_do_get_security_label() also initialises the SEQUENCE call correctly, by having it call into nfs4_call_sync(). Reported-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jeff Layton authored
commit 12207f69 upstream. Chao reported the following oops when testing labeled NFS: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffffa0568703>] nfs4_xdr_enc_setattr+0x43/0x110 [nfsv4] PGD 277bbd067 PUD 2777ea067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache sg coretemp kvm_intel kvm crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel lrw gf128mul iTCO_wdt glue_helper ablk_helper cryptd iTCO_vendor_support bnx2 pcspkr serio_raw i7core_edac cdc_ether microcode usbnet edac_core mii lpc_ich i2c_i801 mfd_core shpchp ioatdma dca acpi_cpufreq mperf nfsd auth_rpcgss nfs_acl lockd sunrpc xfs libcrc32c sr_mod sd_mod cdrom crc_t10dif mgag200 syscopyarea sysfillrect sysimgblt i2c_algo_bit drm_kms_helper ata_generic ttm pata_acpi drm ata_piix libata megaraid_sas i2c_core dm_mirror dm_region_hash dm_log dm_mod CPU: 4 PID: 25657 Comm: chcon Not tainted 3.10.0-33.el7.x86_64 #1 Hardware name: IBM System x3550 M3 -[7944OEJ]-/90Y4784 , BIOS -[D6E150CUS-1.11]- 02/08/2011 task: ffff880178397220 ti: ffff8801595d2000 task.ti: ffff8801595d2000 RIP: 0010:[<ffffffffa0568703>] [<ffffffffa0568703>] nfs4_xdr_enc_setattr+0x43/0x110 [nfsv4] RSP: 0018:ffff8801595d3888 EFLAGS: 00010296 RAX: 0000000000000000 RBX: ffff8801595d3b30 RCX: 0000000000000b4c RDX: ffff8801595d3b30 RSI: ffff8801595d38e0 RDI: ffff880278b6ec00 RBP: ffff8801595d38c8 R08: ffff8801595d3b30 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801595d38e0 R13: ffff880277a4a780 R14: ffffffffa05686c0 R15: ffff8802765f206c FS: 00007f2c68486800(0000) GS:ffff88027fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000027651a000 CR4: 00000000000007e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 ffff880277865800 ffff880278b6ec00 ffff880277a4a780 ffff8801595d3948 ffffffffa02ad926 ffff8801595d3b30 ffff8802765f206c Call Trace: [<ffffffffa02ad926>] rpcauth_wrap_req+0x86/0xd0 [sunrpc] [<ffffffffa02a1d40>] ? call_connect+0xb0/0xb0 [sunrpc] [<ffffffffa02a1d40>] ? call_connect+0xb0/0xb0 [sunrpc] [<ffffffffa02a1ecb>] call_transmit+0x18b/0x290 [sunrpc] [<ffffffffa02a1d40>] ? call_connect+0xb0/0xb0 [sunrpc] [<ffffffffa02aae14>] __rpc_execute+0x84/0x400 [sunrpc] [<ffffffffa02ac40e>] rpc_execute+0x5e/0xa0 [sunrpc] [<ffffffffa02a2ea0>] rpc_run_task+0x70/0x90 [sunrpc] [<ffffffffa02a2f03>] rpc_call_sync+0x43/0xa0 [sunrpc] [<ffffffffa055284d>] _nfs4_do_set_security_label+0x11d/0x170 [nfsv4] [<ffffffffa0558861>] nfs4_set_security_label.isra.69+0xf1/0x1d0 [nfsv4] [<ffffffff815fca8b>] ? avc_alloc_node+0x24/0x125 [<ffffffff815fcd2f>] ? avc_compute_av+0x1a3/0x1b5 [<ffffffffa055897b>] nfs4_xattr_set_nfs4_label+0x3b/0x50 [nfsv4] [<ffffffff811bc772>] generic_setxattr+0x62/0x80 [<ffffffff811bcfc3>] __vfs_setxattr_noperm+0x63/0x1b0 [<ffffffff811bd1c5>] vfs_setxattr+0xb5/0xc0 [<ffffffff811bd2fe>] setxattr+0x12e/0x1c0 [<ffffffff811a4d22>] ? final_putname+0x22/0x50 [<ffffffff811a4f2b>] ? putname+0x2b/0x40 [<ffffffff811aa1cf>] ? user_path_at_empty+0x5f/0x90 [<ffffffff8119bc29>] ? __sb_start_write+0x49/0x100 [<ffffffff811bd66f>] SyS_lsetxattr+0x8f/0xd0 [<ffffffff8160cf99>] system_call_fastpath+0x16/0x1b Code: 48 8b 02 48 c7 45 c0 00 00 00 00 48 c7 45 c8 00 00 00 00 48 c7 45 d0 00 00 00 00 48 c7 45 d8 00 00 00 00 48 c7 45 e0 00 00 00 00 <48> 8b 00 48 8b 00 48 85 c0 0f 84 ae 00 00 00 48 8b 80 b8 03 00 RIP [<ffffffffa0568703>] nfs4_xdr_enc_setattr+0x43/0x110 [nfsv4] RSP <ffff8801595d3888> CR2: 0000000000000000 The problem is that _nfs4_do_set_security_label calls rpc_call_sync() directly which fails to do any setup of the SEQUENCE call. Have it use nfs4_call_sync() instead which does the right thing. While we're at it change the name of "args" to "arg" to better match the pattern in _nfs4_do_setattr. Reported-by:
Chao Ye <cye@redhat.com> Cc: David Quigley <dpquigl@davequigley.com> Signed-off-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jeff Layton authored
commit 1acd1c30 upstream. commit 6686390b (NFS: remove incorrect "Lock reclaim failed!" warning.) added a test for a delegation before checking to see if any reclaimed locks failed. The test however is backward and is only doing that check when a delegation is held instead of when one isn't. Cc: NeilBrown <neilb@suse.de> Signed-off-by:
Jeff Layton <jlayton@redhat.com> Fixes: 6686390b: NFS: remove incorrect "Lock reclaim failed!" warning. Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Trond Myklebust authored
commit d49f042a upstream. Currently, if the call to nfs_refresh_inode fails, then we end up leaking a reference count, due to the call to nfs4_get_open_state. While we're at it, replace nfs4_get_open_state with a simple call to atomic_inc(); there is no need to do a full lookup of the struct nfs_state since it is passed as an argument in the struct nfs4_opendata, and is already assigned to the variable 'state'. Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Weston Andros Adamson authored
commit d2bfda2e upstream. Cached opens have already been handled by _nfs4_opendata_reclaim_to_nfs4_state and can safely skip being reprocessed, but must still call update_open_stateid to make sure that all active fmodes are recovered. Signed-off-by:
Weston Andros Adamson <dros@netapp.com> Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Weston Andros Adamson authored
commit a43ec98b upstream. This is an unneeded check that could cause the client to fail to recover opens. Signed-off-by:
Weston Andros Adamson <dros@netapp.com> Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Weston Andros Adamson authored
commit f494a607 upstream. _nfs4_opendata_reclaim_to_nfs4_state doesn't expect to see a cached open CLAIM_PREVIOUS, but this can happen. An example is when there are RDWR openers and RDONLY openers on a delegation stateid. The recovery path will first try an open CLAIM_PREVIOUS for the RDWR openers, this marks the delegation as not needing RECLAIM anymore, so the open CLAIM_PREVIOUS for the RDONLY openers will not actually send an rpc. The NULL dereference is due to _nfs4_opendata_reclaim_to_nfs4_state returning PTR_ERR(rpc_status) when !rpc_done. When the open is cached, rpc_done == 0 and rpc_status == 0, thus _nfs4_opendata_reclaim_to_nfs4_state returns NULL - this is unexpected by callers of nfs4_opendata_to_nfs4_state(). This can be reproduced easily by opening the same file two times on an NFSv4.0 mount with delegations enabled, once as RDWR and once as RDONLY then sleeping for a long time. While the files are held open, kick off state recovery and this NULL dereference will be hit every time. An example OOPS: [ 65.003602] BUG: unable to handle kernel NULL pointer dereference at 00000000 00000030 [ 65.005312] IP: [<ffffffffa037d6ee>] __nfs4_close+0x1e/0x160 [nfsv4] [ 65.006820] PGD 7b0ea067 PUD 791ff067 PMD 0 [ 65.008075] Oops: 0000 [#1] SMP [ 65.008802] Modules linked in: rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache snd_ens1371 gameport nfsd snd_rawmidi snd_ac97_codec ac97_bus btusb snd_seq snd _seq_device snd_pcm ppdev bluetooth auth_rpcgss coretemp snd_page_alloc crc32_pc lmul crc32c_intel ghash_clmulni_intel microcode rfkill nfs_acl vmw_balloon serio _raw snd_timer lockd parport_pc e1000 snd soundcore parport i2c_piix4 shpchp vmw _vmci sunrpc ata_generic mperf pata_acpi mptspi vmwgfx ttm scsi_transport_spi dr m mptscsih mptbase i2c_core [ 65.018684] CPU: 0 PID: 473 Comm: 192.168.10.85-m Not tainted 3.11.2-201.fc19 .x86_64 #1 [ 65.020113] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/31/2013 [ 65.022012] task: ffff88003707e320 ti: ffff88007b906000 task.ti: ffff88007b906000 [ 65.023414] RIP: 0010:[<ffffffffa037d6ee>] [<ffffffffa037d6ee>] __nfs4_close+0x1e/0x160 [nfsv4] [ 65.025079] RSP: 0018:ffff88007b907d10 EFLAGS: 00010246 [ 65.026042] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 65.027321] RDX: 0000000000000050 RSI: 0000000000000001 RDI: 0000000000000000 [ 65.028691] RBP: ffff88007b907d38 R08: 0000000000016f60 R09: 0000000000000000 [ 65.029990] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 [ 65.031295] R13: 0000000000000050 R14: 0000000000000000 R15: 0000000000000001 [ 65.032527] FS: 0000000000000000(0000) GS:ffff88007f600000(0000) knlGS:0000000000000000 [ 65.033981] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 65.035177] CR2: 0000000000000030 CR3: 000000007b27f000 CR4: 00000000000407f0 [ 65.036568] Stack: [ 65.037011] 0000000000000000 0000000000000001 ffff88007b907d90 ffff88007a880220 [ 65.038472] ffff88007b768de8 ffff88007b907d48 ffffffffa037e4a5 ffff88007b907d80 [ 65.039935] ffffffffa036a6c8 ffff880037020e40 ffff88007a880000 ffff880037020e40 [ 65.041468] Call Trace: [ 65.042050] [<ffffffffa037e4a5>] nfs4_close_state+0x15/0x20 [nfsv4] [ 65.043209] [<ffffffffa036a6c8>] nfs4_open_recover_helper+0x148/0x1f0 [nfsv4] [ 65.044529] [<ffffffffa036a886>] nfs4_open_recover+0x116/0x150 [nfsv4] [ 65.045730] [<ffffffffa036d98d>] nfs4_open_reclaim+0xad/0x150 [nfsv4] [ 65.046905] [<ffffffffa037d979>] nfs4_do_reclaim+0x149/0x5f0 [nfsv4] [ 65.048071] [<ffffffffa037e1dc>] nfs4_run_state_manager+0x3bc/0x670 [nfsv4] [ 65.049436] [<ffffffffa037de20>] ? nfs4_do_reclaim+0x5f0/0x5f0 [nfsv4] [ 65.050686] [<ffffffffa037de20>] ? nfs4_do_reclaim+0x5f0/0x5f0 [nfsv4] [ 65.051943] [<ffffffff81088640>] kthread+0xc0/0xd0 [ 65.052831] [<ffffffff81088580>] ? insert_kthread_work+0x40/0x40 [ 65.054697] [<ffffffff8165686c>] ret_from_fork+0x7c/0xb0 [ 65.056396] [<ffffffff81088580>] ? insert_kthread_work+0x40/0x40 [ 65.058208] Code: 5c 41 5d 5d c3 0f 1f 84 00 00 00 00 00 66 66 66 66 90 55 48 89 e5 41 57 41 89 f7 41 56 41 89 ce 41 55 41 89 d5 41 54 53 48 89 fb <4c> 8b 67 30 f0 41 ff 44 24 44 49 8d 7c 24 40 e8 0e 0a 2d e1 44 [ 65.065225] RIP [<ffffffffa037d6ee>] __nfs4_close+0x1e/0x160 [nfsv4] [ 65.067175] RSP <ffff88007b907d10> [ 65.068570] CR2: 0000000000000030 [ 65.070098] ---[ end trace 0d1fe4f5c7dd6f8b ]--- Signed-off-by:
Weston Andros Adamson <dros@netapp.com> Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Trond Myklebust authored
commit a6f951dd upstream. In nfs4_proc_getlk(), when some error causes a retry of the call to _nfs4_proc_getlk(), we can end up with Oopses of the form BUG: unable to handle kernel NULL pointer dereference at 0000000000000134 IP: [<ffffffff8165270e>] _raw_spin_lock+0xe/0x30 <snip> Call Trace: [<ffffffff812f287d>] _atomic_dec_and_lock+0x4d/0x70 [<ffffffffa053c4f2>] nfs4_put_lock_state+0x32/0xb0 [nfsv4] [<ffffffffa053c585>] nfs4_fl_release_lock+0x15/0x20 [nfsv4] [<ffffffffa0522c06>] _nfs4_proc_getlk.isra.40+0x146/0x170 [nfsv4] [<ffffffffa052ad99>] nfs4_proc_lock+0x399/0x5a0 [nfsv4] The problem is that we don't clear the request->fl_ops after the first try and so when we retry, nfs4_set_lock_state() exits early without setting the lock stateid. Regression introduced by commit 70cc6487 (locks: make ->lock release private data before returning in GETLK case) Reported-by:
Weston Andros Adamson <dros@netapp.com> Reported-by:
Jorge Mora <mora@netapp.com> Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Trond Myklebust authored
commit f3f5a0f8 upstream. In the spec, the security label attribute id is '80', which means that it should be bit number 80-64 == 16 in the 3rd word of the bitmap. Fixes: 4488cc96: NFS: Add NFSv4.2 protocol constants Cc: J. Bruce Fields <bfields@fieldses.org> Cc: Steve Dickson <steved@redhat.com> Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit d08c5ef2 upstream. Some models (or maybe depending on BIOS version) of Sony VAIO with ALC260 give no proper pin configurations as default, resulting in the non-working speaker, etc. Just provide the whole pin configurations via a fixup. Reported-by:
Matthew Markus <mmarkus@hearit.co> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Henningsson authored
commit b8362e70 upstream. BugLink: https://bugs.launchpad.net/bugs/1253636Signed-off-by:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit 0f5a5b85 upstream. BIOS sets MISC_NO_PRESENCE bit wrongly to the pin config on NID 0x0f. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit 0fc28fc0 upstream. When a codec is resumed, it keeps the power on while the resuming phase via hda_keep_power_on(), then turns down via snd_hda_power_down(). At that point, snd_hda_power_down() notifies the power down to the controller, and this may confuse the refcount if the codec was already powered up before the resume. In the end result, the controller goes to runtime suspend even before the codec is kicked off to the power save, and the communication stalls happens. The fix is to add the power-up notification together with hda_keep_power_on(), and clears the flag appropriately. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit d183b4fc upstream. snd_hda_codec_reset() is called either in resetting the whole setup at error paths or hwdep clear/reconfig sysfs triggers. But all of these don't assume that the power has to be off, rather they want to keep the power state unchanged (e.g. reconfig_codec() calls the power up/down by itself). Thus, unconditionally clearing the power state in snd_hda_codec_reset() leads to the inconsistency, confuses the further operation. This patch gets rid of the lines doing that bad thing. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit 7a3e6107 upstream. The only EAPD on AD1986A is on NID 0x1b where usually the speaker. But this doesn't control only the speaker amp but may influence on all outputs, e.g. Lenovo N100 laptop seems to have this issue. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit 468ac413 upstream. We don't change the EAPD bit in set_pin_eapd() if keep_eapd_on flag is set by the codec driver and enable is false. But, we also apply the flipping of enable value according to inv_eapd flag in the same function, and this confused the former check, handled as if it's turned ON. The inverted EAPD check must be applied after keep_eapd_on check, instead. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Henningsson authored
commit 5959a6bc upstream. In case there is both a multifunction headset jack and a Line Out jack, automuting was not working properly from the Line Out jack. This patch fixes that issue. BugLink: https://bugs.launchpad.net/bugs/1250377Tested-by:
Cyrus Lien <cyrus.lien@canonical.com> Signed-off-by:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit 487a588d upstream. BIOS on ASUS W5A laptop with ALC880 codec doesn't provide any pin configurations, so we have to set up all pins manually. Reported-and-tested-by:
nb <nb@dagami.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit 8f42d769 upstream. It's a superset of the existing CX2075x codecs, so we can reuse the existing parser code. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Henningsson authored
commit d5b6b65e upstream. Some HP machines with Realtek codecs have mute LEDs connected to VREF pins. However when these go into runtime suspend, the pin powers down and its pin control is disabled, thus disabling the LED too. This patch fixes that issue by making sure that the pin stays in D0 with correct pin control. BugLink: https://bugs.launchpad.net/bugs/1248465Tested-by:
Franz Hsieh <franz.hsieh@canonical.com> Signed-off-by:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit 33499a15 upstream. Haswell HDMI audio controllers seem to get stuck when unaligned buffer size is used. Let's enable the buffer alignment for the corresponding entries. Since AZX_DCAPS_INTEL_PCH contains AZX_DCAPS_BUFSIZE that disables the buffer alignment forcibly, define AZX_DCAPS_INTEL_HASWELL and put the necessary AZX_DCAPS bits there. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=60769Reported-by:
Alexander E. Patrakov <patrakov@gmail.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit 24eff328 upstream. BIOS on Acer TravelMate 6293 doesn't set up the SPDIF output pin correctly as default, so enable it via a fixup entry. Reported-and-tested-by:
Hagen Heiduck <heiduck.suse@fmail.postpro.net> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit a1114a8c upstream. Add a bitmask to hda_gen_spec indicating NIDs to exclude from the possible volume controls. That is, when the bit is set, the NID corresponding to the bit won't be picked as an output volume control any longer. Basically this is just a band-aid for working around the issue found with CS4208 codec, where only the headphone pin has a volume AMP with different dB steps. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=60811Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kailang Yang authored
commit 1d04c9de upstream. It's just another variant of ALC269 & co. Signed-off-by:
Kailang Yang <kailang@realtek.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit 092f9cd1 upstream. msnd_pinnacle.c is used for both snd-msnd-pinnacle and snd-msnd-classic drivers, and both should have different driver names. Using the same driver name results in the sysfs warning for duplicated entries like kobject: 'msnd-pinnacle.7' (cec33408): kobject_release, parent (null) (delayed) kobject: 'msnd-pinnacle' (cecd4980): kobject_release, parent cf3ad9b0 (delayed) ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:486 sysfs_warn_dup+0x7d/0xa0() sysfs: cannot create duplicate filename '/bus/isa/drivers/msnd-pinnacle' ...... Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit 885845d7 upstream. The commit [8fe7b65a: ALSA: hda - Apply GPIO setup for MacBooks with CS4208] added a fixup entry matching with the vendor id 0x106b. This broke the fixups for previous MBA6,1 and 6,2, since the PCI SSID vendor id matches before evaluating the codec SSIDs. We had a similar issue on Mac with Sigmatel codecs, and solve this problem again similarly, by introducing a skeleton entry matching with the all MacBooks, then remap to the right one. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=64401 Fixes: 8fe7b65a ('ALSA: hda - Apply GPIO setup for MacBooks with CS4208') Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit 8fe7b65a upstream. Apply the existing GPIO0 fixup as default for MacBooks with CS4208 codec. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=64401Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-