- 17 Mar, 2011 26 commits
-
-
GuanXuetao authored
This patch implements arch-specific ps2 driver. By reviewed with Dmitry Torokhov: 1. move i8042-ucio.h to drivers/input/serio/i8042-unicore32io.h 2. move puv3_ps2_init() to arch/unicore32/kernel/puv3-core.c 3. remove unused comments. Signed-off-by:Guan Xuetao <gxt@mprc.pku.edu.cn> Acked-by:
Dmitry Torokhov <dtor@mail.ru>
-
GuanXuetao authored
This patch implements arch-specific pci bus driver. Signed-off-by: -
GuanXuetao authored
This patch adds all hardware registers definitions. Signed-off-by: -
GuanXuetao authored
This patch adds machine related core files, also including build infrastructure. Signed-off-by:
Arnd Bergmann <arnd@arndb.de>
-
GuanXuetao authored
This patch implements booting process, including uncompression process. Signed-off-by:
-
GuanXuetao authored
This patch implements the rest low-level libraries. Signed-off-by:
-
GuanXuetao authored
This patch implements low-level uaccess libraries. Signed-off-by:
-
GuanXuetao authored
This patch implements low-level debug libraries with On-Chip-Debugger hardware support. Signed-off-by:
-
GuanXuetao authored
This patch adds ptrace support. Changed from previous version: 1. disable arch_has_single_step and remove single-step instruction handler 2. add 'Ross Biro 1/23/92' contributor information 3. clean unused codes Signed-off-by: -
GuanXuetao authored
This patch implements support for float point unit, which using UniCore-F64 FPU hardware in UniCore32 ISA. Signed-off-by:
-
GuanXuetao authored
This patch adds pm related files, including hibernate and sleep supports. Signed-off-by:
-
GuanXuetao authored
This patch implements signals. Signed-off-by: -
GuanXuetao authored
This patch implements interrupts and gpio handling. UniCore32 has 9 gpio interrupt sources. And gpio device operations are also here. Signed-off-by: -
GuanXuetao authored
This patch implements timer and time. RTC and PWM device drivers are also here. Signed-off-by: -
GuanXuetao authored
This patch implements consistent device DMA handling of memory management. DMA device operations are also here. Signed-off-by:
-
GuanXuetao authored
This patch implements fault handling of memory management. Signed-off-by:
-
GuanXuetao authored
This patch includes generic codes for memory management. Signed-off-by:
-
GuanXuetao authored
This patch implements process/thread related codes. Backtrace and stacktrace are here. Signed-off-by:
-
GuanXuetao authored
This patch implements low level entry and setup codes. Signed-off-by:
-
GuanXuetao authored
This patch includes processor and system headers. System call interface is here. We used the syscall interface the same as asm-generic version. Signed-off-by:
-
GuanXuetao authored
This patch includes some generic stuff including elf and ksyms. Because all one-line asm-generic headers are auto-generated by ASM_GENERIC_HEADERS in arch/unicore32/Makefile, so the rest seems very little. ELF handling functions and module handling functions are also here. Signed-off-by:
-
GuanXuetao authored
This patch implements build infrastructure. Signed-off-by:
-
GuanXuetao authored
This patch changes the implementation of strnlen_user in include/asm-generic/uaccess.h. Originally, it calls strlen() function directly, which may not correctly handle the access of user space in most mmu-enabled architectures. New __strnlen_user is added for using as an architecture specific function. Signed-off-by:
-
GuanXuetao authored
This patch adds ftrace.h into asm-generic headers. The file content could be empty in most architectures. Signed-off-by:
-
GuanXuetao authored
This patch adds sizes.h into asm-generic headers. Only 32-bit version supported. Signed-off-by:
-
GuanXuetao authored
The definitions for the PC-style PIO functions in asm-generic/io.h were meant as dummies so you could compile code on architectures without ISA and PCI buses. However, unicore32 actually wants to use them with a real PCI bus, so they need to be defined to actually address the register window holding the I/O ports. Signed-off-by:
-
- 15 Mar, 2011 1 commit
-
-
Linus Torvalds authored
-
- 14 Mar, 2011 13 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300Linus Torvalds authored
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300: MN10300: atomic_read() should ensure it emits a load MN10300: The SMP_ICACHE_INV_FLUSH_RANGE IPI command does not exist MN10300: Proper use of macros get_user() in the case of incremented pointers
-
git://git.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (26 commits) MIPS: Alchemy: Fix reset for MTX-1 and XXS1500 MIPS: MTX-1: Make au1000_eth probe all PHY addresses MIPS: Jz4740: Add HAVE_CLK MIPS: Move idle task creation to work queue MIPS, Perf-events: Use unsigned delta for right shift in event update MIPS, Perf-events: Work with the new callchain interface MIPS, Perf-events: Fix event check in validate_event() MIPS, Perf-events: Work with the new PMU interface MIPS, Perf-events: Work with irq_work MIPS: Fix always CONFIG_LOONGSON_UART_BASE=y MIPS: Loongson: Fix potentially wrong string handling MIPS: Fix GCC-4.6 'set but not used' warning in arch/mips/mm/init.c MIPS: Fix GCC-4.6 'set but not used' warning in ieee754int.h MIPS: Remove unused code from arch/mips/kernel/syscall.c MIPS: Fix GCC-4.6 'set but not used' warning in signal*.c MIPS: MSP: Fix MSP71xx bpci interrupt handler return value MIPS: Select R4K timer lib for all MSP platforms MIPS: Loongson: Remove ad-hoc cmdline default MIPS: Clear the correct flag in sysmips(MIPS_FIXADE, ...). MIPS: Add an unreachable return statement to satisfy buggy GCCs. ...
-
Linus Torvalds authored
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: ce4100: Set pci ops via callback instead of module init x86/mm: Fix pgd_lock deadlock x86/mm: Handle mm_fault_error() in kernel space x86: Don't check for BIOS corruption in first 64K when there's no need to
-
Linus Torvalds authored
This reverts the parent commit. I hate doing that, but it's generating some discussion ("half of it is right"), and since I am planning on doing the 2.6.38 release later today we can punt it to stable if required. Let's not rock the boat right now. Signed-off-by:Linus Torvalds <torvalds@linux-foundation.org>
-
Oleg Nesterov authored
oom_kill_process() starts with victim_points == 0. This means that (most likely) any child has more points and can be killed erroneously. Also, "children has a different mm" doesn't match the reality, we should check child->mm != t->mm. This check is not exactly correct if t->mm == NULL but this doesn't really matter, oom_kill_task() will kill them anyway. Note: "Kill all processes sharing p->mm" in oom_kill_task() is wrong too. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
-
Florian Fainelli authored
Since commit 32fd6901 (MIPS: Alchemy: get rid of common/reset.c) Alchemy-based boards use their own reset function. For MTX-1 and XXS1500, the reset function pokes at the BCSR.SYSTEM_RESET register, but this does not work. According to Bruno Randolf, this was not tested when written. Previously, the generic au1000_restart() routine called the board specific reset function, which for MTX-1 and XXS1500 did not work, but finally made a jump to the reset vector, which really triggers a system restart. Fix reboot for both targets by jumping to the reset vector. Signed-off-by:
Florian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2093/Acked-by:
Bruno Randolf <br1@einfach.org> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Florian Fainelli authored
When au1000_eth probes the MII bus for PHY address, if we do not set au1000_eth platform data's phy_search_highest_address, the MII probing logic will exit early and will assume a valid PHY is found at address 0. For MTX-1, the PHY is at address 31, and without this patch, the link detection/speed/duplex would not work correctly. CC: stable@kernel.org Signed-off-by:
-
Maurus Cuelenaere authored
Jz4740 supports the clock framework but doesn't have HAVE_CLK defined, so define it! Signed-off-by:
Maurus Cuelenaere <mcuelenaere@gmail.com> To: linux-mips@linux-mips.org To: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/2112/Acked-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
Maksim Rayskiy authored
To avoid forking usermode thread when creating an idle task, move fork_idle to a work queue. If kernel starts with maxcpus= option which does not bring all available cpus online at boot time, idle tasks for offline cpus are not created. If later offline cpus are hotplugged through sysfs, __cpu_up is called in the context of the user task, and fork_idle copies its non-zero mm pointer. This causes BUG() in per_cpu_trap_init. This also avoids issues with resource limits of the CPU writing to sysfs, containers, maybe others. Signed-off-by:
Maksim Rayskiy <mrayskiy@broadcom.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2070/Signed-off-by:
-
Deng-Cheng Zhu authored
Leverage the commit for ARM by Will Deacon: - 446a5a8b ARM: 6205/1: perf: ensure counter delta is treated as unsigned Hardware performance counters on ARM are 32-bits wide but atomic64_t variables are used to represent counter data in the hw_perf_event structure. The armpmu_event_update function right-shifts a signed 64-bit delta variable and adds the result to the event count. This can lead to shifting in sign-bits if the MSB of the 32-bit counter value is set. This results in perf output such as: Performance counter stats for 'sleep 20': 18446744073460670464 cycles <-- 0xFFFFFFFFF12A6000 7783773 instructions # 0.000 IPC 465 context-switches 161 page-faults 1172393 branches 20.154242147 seconds time elapsed This patch ensures that the delta value is treated as unsigned so that the right shift sets the upper bits to zero. Acked-by:
Will Deacon <will.deacon@arm.com> Acked-by:
David Daney <ddaney@caviumnetworks.com> Signed-off-by:
Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: a.p.zijlstra@chello.nl To: fweisbec@gmail.com To: will.deacon@arm.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: wuzhangjin@gmail.com Cc: paulus@samba.org Cc: mingo@elte.hu Cc: acme@redhat.com Cc: matt@console-pimps.org Cc: sshtylyov@mvista.com Patchwork: http://patchwork.linux-mips.org/patch/2015/Signed-off-by:
-
Deng-Cheng Zhu authored
This is the MIPS part of the following commits by Frederic Weisbecker: - f72c1a93 perf: Factorize callchain context handling Store the kernel and user contexts from the generic layer instead of archs, this gathers some repetitive code. - 56962b44 perf: Generalize some arch callchain code - Most archs use one callchain buffer per cpu, except x86 that needs to deal with NMIs. Provide a default perf_callchain_buffer() implementation that x86 overrides. - Centralize all the kernel/user regs handling and invoke new arch handlers from there: perf_callchain_user() / perf_callchain_kernel() That avoid all the user_mode(), current->mm checks and so... - Invert some parameters in perf_callchain_*() helpers: entry to the left, regs to the right, following the traditional (dst, src). - 70791ce9 perf: Generalize callchain_store() callchain_store() is the same on every archs, inline it in perf_event.h and rename it to perf_callchain_store() to avoid any collision. This removes repetitive code. - c1a65932 perf: Drop unappropriate tests on arch callchains Drop the TASK_RUNNING test on user tasks for callchains as this check doesn't seem to make any sense. Also remove the tests for !current that is not supposed to happen and current->pid as this should be handled at the generic level, with exclude_idle attribute. Reported-by:
Wu Zhangjin <wuzhangjin@gmail.com> Acked-by:
Frederic Weisbecker <fweisbec@gmail.com> Acked-by:
-
Deng-Cheng Zhu authored
Ignore events that are in off/error state or belong to a different PMU. This patch originates from the following commit for ARM by Will Deacon: - 65b4711f ARM: 6352/1: perf: fix event validation The validate_event function in the ARM perf events backend has the following problems: 1.) Events that are disabled count towards the cost. 2.) Events associated with other PMUs [for example, software events or breakpoints] do not count towards the cost, but do fail validation, causing the group to fail. This patch changes validate_event so that it ignores events in the PERF_EVENT_STATE_OFF state or that are scheduled for other PMUs. Acked-by:
-
Deng-Cheng Zhu authored
This is the MIPS part of the following commits by Peter Zijlstra: - a4eaf7f1 perf: Rework the PMU methods Replace pmu::{enable,disable,start,stop,unthrottle} with pmu::{add,del,start,stop}, all of which take a flags argument. The new interface extends the capability to stop a counter while keeping it scheduled on the PMU. We replace the throttled state with the generic stopped state. This also allows us to efficiently stop/start counters over certain code paths (like IRQ handlers). It also allows scheduling a counter without it starting, allowing for a generic frozen state (useful for rotating stopped counters). The stopped state is implemented in two different ways, depending on how the architecture implemented the throttled state: 1) We disable the counter: a) the pmu has per-counter enable bits, we flip that b) we program a NOP event, preserving the counter state 2) We store the counter state and ignore all read/overflow events For MIPSXX, the stopped state is implemented in the way of 1.b as above. - 33696fc0 perf: Per PMU disable Changes perf_disable() into perf_pmu_disable(). - 24cd7f54 perf: Reduce perf_disable() usage Since the current perf_disable() usage is only an optimization, remove it for now. This eases the removal of the __weak hw_perf_enable() interface. - b0a873eb perf: Register PMU implementations Simple registration interface for struct pmu, this provides the infrastructure for removing all the weak functions. - 51b0fe39 perf: Deconstify struct pmu sed -ie 's/const struct pmu\>/struct pmu/g' `git grep -l "const struct pmu\>"` Reported-by:
-
