- 04 Jul, 2024 1 commit
-
-
Johannes Berg authored
The NAN code referenced in this commit isn't actually present in the driver (any more), and the commit didn't add the extra NAN entry. Thus, the -1 is incorrect. Reported-by:
Alexander Wetzel <Alexander@wetzel-home.de> Closes: https://lore.kernel.org/20240702104128.26394-1-Alexander@wetzel-home.de Fixes: 5c38beda ("wifi: iwlwifi: mvm: unify and fix interface combinations") Link: https://patch.msgid.link/20240702130001.8c871a3f0b5a.I08a6542f52f63c5bd66bf3feb09e1998ce7c60e5@changeidSigned-off-by:
Johannes Berg <johannes.berg@intel.com>
-
- 03 Jul, 2024 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/ath/athKalle Valo authored
ath.git patches for v6.11 We have moved to a new group-managed repo, and this is the first pull request from that repo, and from me. Fingers crossed... We have some new features in ath12k along with some cleanups in ath11k and ath12k. Also notable are some device-tree changes to allow certain ath11k and ath12k devices to work with a new power sequencing subsystem. Major changes: ath12k * DebugFS support for datapath statistics * WCN7850: support for WoW (Wake on WLAN) * WCN7850: device-tree bindings ath11k * QCA6390: device-tree bindings
-
- 01 Jul, 2024 7 commits
-
-
Dinesh Karthikeyan authored
Add support to request pdev TQM stats from firmware through HTT stats type 6. This stat type gives information such as TQM error, MPDU related information and TQM pdev stats. Sample output: ------------- echo 6 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_TX_TQM_ERROR_STATS_TLV: q_empty_failure = 0 q_not_empty_failure = 0 add_msdu_failure = 0 TQM_ERROR_RESET_STATS: tqm_cache_ctl_err = 0 tqm_soft_reset = 0 tqm_reset_total_num_in_use_link_descs = 0 ..... HTT_TX_TQM_GEN_MPDU_STATS_TLV: gen_mpdu_end_reason = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0 HTT_TX_TQM_LIST_MPDU_STATS_TLV: list_mpdu_end_reason = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0 HTT_TX_TQM_LIST_MPDU_CNT_TLV_V: list_mpdu_cnt_hist = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0 HTT_TX_TQM_PDEV_STATS_TLV_V: msdu_count = 0 mpdu_count = 0 remove_msdu = 0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by:
Dinesh Karthikeyan <quic_dinek@quicinc.com> Signed-off-by:
Roopni Devanathan <quic_rdevanat@quicinc.com> Acked-by:
Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by:
Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240625042217.1303332-4-quic_rdevanat@quicinc.com
-
Dinesh Karthikeyan authored
Add support to request pdev error stats from firmware through HTT stats type 5. This stats type gives information such as list of pdev errors, reasons for reset, logging information about recovery, drain and war stats. etc. Sample output: ------------- echo 5 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_HW_STATS_PDEV_ERRS_TLV: mac_id = 0 tx_abort = 0 tx_abort_fail_count = 0 rx_abort = 53 ..... PDEV_PHY_WARM_RESET_REASONS: phy_warm_reset_reason_phy_m3 = 0 phy_warm_reset_reason_tx_hw_stuck = 0 phy_warm_reset_reason_num_cca_rx_frame_stuck = 0 ..... WAL_RX_RECOVERY_STATS: wal_rx_recovery_rst_mac_hang_count = 0 wal_rx_recovery_rst_known_sig_count = 0 wal_rx_recovery_rst_no_rx_count = 0 ..... HTT_RX_DEST_DRAIN_STATS: rx_dest_drain_rx_descs_leak_prevention_done = 0 rx_dest_drain_rx_descs_saved_cnt = 0 rx_dest_drain_rxdma2reo_leak_detected = 0 ..... HTT_HW_STATS_INTR_MISC_TLV: hw_intr_name = AMPI mask = 0 count = 2 HTT_HW_STATS_WHAL_TX_TLV: mac_id = 0 last_unpause_ppdu_id = 0 hwsch_unpause_wait_tqm_write = 0 ..... HTT_HW_WAR_STATS_TLV: mac_id = 0 hw_war 0 = 0 hw_war 1 = 0 ..... Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by:
-
Dinesh Karthikeyan authored
Add support to request transmission scheduler stats from firmware through HTT stats type 4. This stat gives information such as pdev stats scheduled per transmission queue, transmission queue command posted and reaped, scheduler order, scheduler ineligibility and supercycle triggers. Sample output: ------------- echo 4 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_STATS_TX_SCHED_CMN_TLV: mac_id = 0 current_timestamp = 952546828 HTT_TX_PDEV_STATS_SCHED_PER_TXQ_TLV: mac_id = 0 txq_id = 14 sched_policy = 2 ..... HTT_SCHED_TXQ_CMD_POSTED_TLV: sched_cmd_posted = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0 HTT_SCHED_TXQ_CMD_REAPED_TLV: sched_cmd_reaped = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0 HTT_SCHED_TXQ_SCHED_ORDER_SU_TLV: sched_order_su = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0, 17:0, 18:0, 19:0 HTT_SCHED_TXQ_SCHED_INELIGIBILITY: sched_ineligibility = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0, 17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0 HTT_SCHED_TXQ_SUPERCYCLE_TRIGGER: supercycle_triggers = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by:
-
Ramya Gnanasekar authored
Support to dump additional Tx PDEV stats through HTT stats debugfs. Following stats dump are supported: 1. PDEV control path stat to dump Tx management frame count 2. Tx PDEV SIFS histogram stats 3. Tx MU MIMO PPDU stats for 802.11ac, 802.11ax and 802.11be Sample Output: --------------- echo 1 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_TX_PDEV_STATS_CMN_TLV: mac_id = 0 comp_delivered = 0 self_triggers = 13 ...... ...... HTT_TX_PDEV_STATS_CTRL_PATH_TX_STATS: fw_tx_mgmt_subtype = 0:1, 1:0, 2:0, 3:0, 4:38, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:1, 12:0, 13:7, 14:0, 15:0 HTT_TX_PDEV_STATS_SIFS_HIST_TLV: sifs_hist_status = 0:237, 1:185, 2:1, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0 HTT_TX_PDEV_AC_MU_PPDU_DISTRIBUTION_STATS: ac_mu_mimo_num_seq_posted_nr4 = 0 ac_mu_mimo_num_ppdu_posted_per_burst_nr4 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0 ac_mu_mimo_num_ppdu_completed_per_burst_nr4 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0 ac_mu_mimo_num_seq_term_status_nr4 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0 ac_mu_mimo_num_seq_posted_nr8 = 0 ac_mu_mimo_num_ppdu_posted_per_burst_nr8 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0 ac_mu_mimo_num_ppdu_completed_per_burst_nr8 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0 ac_mu_mimo_num_seq_term_status_nr8 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0 HTT_TX_PDEV_AX_MU_PPDU_DISTRIBUTION_STATS: ax_mu_mimo_num_seq_posted_nr4 = 0 ax_mu_mimo_num_ppdu_posted_per_burst_nr4 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0 ax_mu_mimo_num_ppdu_completed_per_burst_nr4 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0 ax_mu_mimo_num_seq_term_status_nr4 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0 ax_mu_mimo_num_seq_posted_nr8 = 0 ax_mu_mimo_num_ppdu_posted_per_burst_nr8 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0 ax_mu_mimo_num_ppdu_completed_per_burst_nr8 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0 ax_mu_mimo_num_seq_term_status_nr8 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0 HTT_TX_PDEV_BE_MU_PPDU_DISTRIBUTION_STATS: be_mu_mimo_num_seq_posted_nr4 = 0 be_mu_mimo_num_ppdu_posted_per_burst_nr4 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0 be_mu_mimo_num_ppdu_completed_per_burst_nr4 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0 be_mu_mimo_num_seq_term_status_nr4 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0 be_mu_mimo_num_seq_posted_nr8 = 0 be_mu_mimo_num_ppdu_posted_per_burst_nr8 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0 be_mu_mimo_num_ppdu_completed_per_burst_nr8 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0 be_mu_mimo_num_seq_term_status_nr8 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by:Ramya Gnanasekar <quic_rgnanase@quicinc.com> Acked-by:
-
Dinesh Karthikeyan authored
Add extended htt stats parser and print the corresponding TLVs associated with the requested htt_stats_type. Add support for TX PDEV related htt stats. Sample output: -------------- echo 1 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_TX_PDEV_STATS_CMN_TLV: mac_id = 0 comp_delivered = 0 self_triggers = 256 hw_queued = 275 hw_reaped = 275 underrun = 241 hw_paused = 0 hw_flush = 0 hw_filt = 1 tx_abort = 0 ppdu_ok = 246 mpdu_requeued = 0 tx_xretry = 0 data_rc = 3 mpdu_dropped_xretry = 0 illegal_rate_phy_err = 0 cont_xretry = 0 tx_timeout = 0 tx_time_dur_data = 0 pdev_resets = 0 phy_underrun = 0 txop_ovf = 0 seq_posted = 247 seq_failed_queueing = 0 seq_completed = 247 seq_restarted = 0 seq_txop_repost_stop = 0 next_seq_cancel = 0 dl_mu_mimo_seq_posted = 0 dl_mu_ofdma_seq_posted = 0 ul_mu_mimo_seq_posted = 0 ul_mu_ofdma_seq_posted = 0 mu_mimo_peer_blacklisted = 0 seq_qdepth_repost_stop = 0 seq_min_msdu_repost_stop = 0 mu_seq_min_msdu_repost_stop = 0 seq_switch_hw_paused = 0 next_seq_posted_dsr = 0 seq_posted_isr = 0 seq_ctrl_cached = 0 mpdu_count_tqm = 0 msdu_count_tqm = 0 mpdu_removed_tqm = 0 msdu_removed_tqm = 0 remove_mpdus_max_retries = 0 mpdus_sw_flush = 0 mpdus_hw_filter = 0 mpdus_truncated = 0 mpdus_ack_failed = 0 mpdus_expired = 0 mpdus_seq_hw_retry = 0 ack_tlv_proc = 0 coex_abort_mpdu_cnt_valid = 0 coex_abort_mpdu_cnt = 5 num_total_ppdus_tried_ota = 5 num_data_ppdus_tried_ota = 0 local_ctrl_mgmt_enqued = 247 local_ctrl_mgmt_freed = 247 local_data_enqued = 0 local_data_freed = 0 mpdu_tried = 0 isr_wait_seq_posted = 0 tx_active_dur_us_low = 0 tx_active_dur_us_high = 0 fes_offsets_err_cnt = 0 HTT_TX_PDEV_STATS_URRN_TLV: urrn_stats = 0:0, 1:241, 2:0 HTT_TX_PDEV_STATS_SIFS_TLV: sifs_status = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0 HTT_TX_PDEV_STATS_FLUSH_TLV: flush_errs = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0, 17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0, 38:0, 39:0, 40:0, 41:0, 42:0, 43:0, 44:0, 45:0, 46:0, 47:0, 48:0, 49:0, 50:0, 51:0, 52:0, 53:0, 54:0, 55:0, 56:0, 57:0, 58:0, 59:0, 60:0, 61:0, 62:0, 63:0, 64:0, 65:0, 66:0, 67:0, 68:0, 69:0, 70:0, 71:0, 72:0, 73:0, 74:0, 75:0, 76:0, 77:0, 78:0, 79:0, 80:0, 81:0, 82:0, 83:0, 84:0, 85:0, 86:0, 87:0, 88:0, 89:0, 90:0, 91:0, 92:0, 93:0, 94:0, 95:0, 96:0, 97:0, 98:0, 99:0, 100:0, 101:0, 102:0, 103:0, 104:0, 105:0, 106:0, 107:0, 108:0, 109:0, 110:0, 111:0, 112:0, 113:0, 114:0, 115:0, 116:0, 117:0, 118:0, 119:0, 120:0, 121:0, 122:0, 123:0, 124:0, 125:0, 126:0, 127:0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by:
-
Dinesh Karthikeyan authored
Add dump_htt_stats file operation to dump the stats value requested for the requested stats_type. Stats sent from firmware will be cumulative. Hence add debugfs to reset the requested stats type. Example with one ath12k device: ath12k `-- pci-0000:06:00.0 |-- mac0 `-- htt_stats |-- htt_stats_type |-- htt_stats_reset Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: -
Dinesh Karthikeyan authored
Create debugfs_htt_stats file when ath12k debugfs support is enabled. Add basic ath12k_debugfs_htt_stats_register and handle htt_stats_type file operations. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by:
-
- 28 Jun, 2024 5 commits
-
-
Johannes Berg authored
This flag is annoying because it puts a lot of logic into mac80211 that could just as well be in the driver (only iwlmvm uses it) and the implementation is also broken for MLO. Remove the flag in favour of calling drv_mgd_prepare_tx() without any conditions even for the deauth-while-assoc case. The drivers that implement it can take the appropriate actions, which for the only user of DEAUTH_NEED_MGD_TX_PREP (iwlmvm) is a bit more tricky than the implementation in mac80211 is anyway, and all others have no need and can just exit if info->was_assoc is set. Reviewed-by:
Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240627132527.94924bcc9c9e.I328a219e45f2e2724cd52e75bb9feee3bf21a463@changeidSigned-off-by:
-
Johannes Berg authored
Some kernel-doc in the header file was mismatched, fix that. Reviewed-by:
-
Ilan Peer authored
The beacon processing should be fully done in the context of the link. This also resolves a bug with CQM handling with MLO as in such a case the RSSI thresholds configuration is maintained in the link context and not in the interface context. Reviewed-by:
Ilan Peer <ilan.peer@intel.com> Link: https://patch.msgid.link/20240627104600.bb2f0f697881.I675b6a8a186b717f3eef79113c27361fd1a7622c@changeidSigned-off-by:
-
Johannes Berg authored
This is now unused in nl80211, so there's no need to set the pointer/length. Reviewed-by:
-
Johannes Berg authored
When a key is requested by userspace, there's really no need to include the key data, the sequence counter is really what userspace needs in this case. The fact that it's included is just a historic quirk. Remove the key data. Reviewed-by:
-
- 27 Jun, 2024 26 commits
-
-
Breno Leitao authored
Embedding net_device into structures prohibits the usage of flexible arrays in the net_device structure. For more details, see the discussion at [1]. Un-embed the net_devices from struct lmac by converting them into pointers, and allocating them dynamically. Use the leverage alloc_netdev() to allocate the net_device object at bgx_lmac_enable(). The free of the device occurs at bgx_lmac_disable(). Do not free_netdevice() if bgx_lmac_enable() fails after lmac->netdev is allocated, since bgx_lmac_disable() is called if bgx_lmac_enable() fails, and lmac->netdev will be freed there (similarly to lmac->dmacs). Link: https://lore.kernel.org/all/20240229225910.79e224cf@kernel.org/ [1] Signed-off-by:
Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20240626173503.87636-1-leitao@debian.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Sagi Grimberg authored
This reverts commit 934c2999. This triggered a usercopy BUG() in systems with HIGHMEM, reported by the test robot in: https://lore.kernel.org/oe-lkp/202406161539.b5ff7b20-oliver.sang@intel.comSigned-off-by:
Sagi Grimberg <sagi@grimberg.me> Link: https://patch.msgid.link/20240626070153.759257-1-sagi@grimberg.meSigned-off-by:
-
Jakub Kicinski authored
Aaron Conole says: ==================== selftests: net: Switch pmtu.sh to use the internal ovs script. Currently, if a user wants to run pmtu.sh and cover all the provided test cases, they need to install the Open vSwitch userspace utilities. This dependency is difficult for users as well as CI environments, because the userspace build and setup may require lots of support and devel packages to be installed, system setup to be correct, and things like permissions and selinux policies to be properly configured. The kernel selftest suite includes an ovs-dpctl.py utility which can interact with the openvswitch module directly. This lets developers and CI environments run without needing too many extra dependencies - just the pyroute2 python package. This series enhances the ovs-dpctl utility to provide support for set() and tunnel() flow specifiers, better ipv6 handling support, and the ability to add tunnel vports, and LWT interfaces. Finally, it modifies the pmtu.sh script to call the ovs-dpctl.py utility rather than the typical OVS userspace utilities. The pmtu.sh can still fall back on the Open vSwitch userspace utilities if the ovs-dpctl.py script can't be used. ==================== Link: https://patch.msgid.link/20240625172245.233874-1-aconole@redhat.comSigned-off-by:
-
Aaron Conole authored
The pmtu testing will require that the OVS module is installed, so do that. Reviewed-by:
Simon Horman <horms@kernel.org> Tested-by:
Aaron Conole <aconole@redhat.com> Link: https://patch.msgid.link/20240625172245.233874-8-aconole@redhat.comSigned-off-by:
-
Aaron Conole authored
The current pmtu test infrastucture requires an installed copy of the ovs-vswitchd userspace. This means that any automated or constrained environments may not have the requisite tools to run the tests. However, the pmtu tests don't require any special classifier processing. Indeed they are only using the vswitchd in the most basic mode - as a NORMAL switch. However, the ovs-dpctl kernel utility can now program all the needed basic flows to allow traffic to traverse the tunnels and provide support for at least testing some basic pmtu scenarios. More complicated flow pipelines can be added to the internal ovs test infrastructure, but that is work for the future. For now, enable the most common cases - wide mega flows with no other prerequisites. Enhance the pmtu testing to try testing using the internal utility, first. As a fallback, if the internal utility isn't running, then try with the ovs-vswitchd userspace tools. Additionally, make sure that when the pyroute2 package is not available the ovs-dpctl utility will error out to properly signal an error has occurred and skip using the internal utility. Reviewed-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
-
Aaron Conole authored
The current iteration of IPv6 support requires explicit fields to be set in addition to not properly support the actual IPv6 addresses properly. With this change, make it so that the ipv6() bare option is usable to create wildcarded flows to match broad swaths of ipv6 traffic. Reviewed-by:
-
Aaron Conole authored
This will be used when setting details about the tunnel to use as transport. There is a difference between the ODP format between tunnel(): the 'key' flag is not actually a flag field, so we don't support it in the same way that the vswitchd userspace supports displaying it. Signed-off-by:
-
Aaron Conole authored
These will be used in upcoming commits to set specific attributes for interacting with tunnels. Since set() will use the key parsing routine, we also make sure to prepend it with an open paren, for the action parsing to properly understand it. Reviewed-by:
-
Aaron Conole authored
Until recently, the ovs-dpctl utility was used with a limited actions set and didn't need to have support for multiple similar actions. However, when adding support for tunnels, it will be important to support multiple set() actions in a single flow. When printing these actions, the existing code will be unable to print all of the sets - it will only print the first. Refactor this code to be easier to read and support multiple actions of the same type in an action list. Reviewed-by:
-
Aaron Conole authored
The OVS module can operate in conjunction with various types of tunnel ports. These are created as either explicit tunnel vport types, OR by creating a tunnel interface which acts as an anchor for the lightweight tunnel support. This patch adds the ability to add tunnel ports to an OVS datapath for testing various scenarios with tunnel ports. With this addition, the vswitch "plumbing" will at least be able to push packets around using the tunnel vports. Future patches will add support for setting required tunnel metadata for lwts in the datapath. The end goal will be to push packets via these tunnels, and will be used in an upcoming commit for testing the path MTU. Reviewed-by:
-
Jeff Johnson authored
With ARCH=s390, make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/s390/net/lcs.o Add the missing invocation of the MODULE_DESCRIPTION() macro. Signed-off-by:
Alexandra Winter <wintera@linux.ibm.com> Link: https://patch.msgid.link/20240625-md-s390-drivers-s390-net-v2-1-5a8a2b2f2ae3@quicinc.comSigned-off-by:
-
Jakub Kicinski authored
Use display hints for formatting scalar attrs. This is specifically useful for formatting IPv4 addresses carried typically as u32. Reviewed-by:
Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/20240626201234.2572964-1-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Merge tag 'wireless-next-2024-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes Berg says: ==================== Highlights this time are: - cfg80211/nl80211: * improvements for 6 GHz regulatory flexibility - mac80211: * use generic netdev stats * multi-link improvements/fixes - brcmfmac: * MFP support (to enable WPA3) - wilc1000: * suspend/resume improvements - iwlwifi: * remove support for older FW for new devices * fast resume (keeping the device configured) - wl18xx: * support newer firmware versions * tag 'wireless-next-2024-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (100 commits) wifi: brcmfmac: of: Support interrupts-extended wifi: brcmsmac: advertise MFP_CAPABLE to enable WPA3 net: rfkill: Correct return value in invalid parameter case wifi: mac80211: fix NULL dereference at band check in starting tx ba session wifi: iwlwifi: mvm: fix rs.h kernel-doc wifi: iwlwifi: fw: api: datapath: fix kernel-doc wifi: iwlwifi: fix remaining mistagged kernel-doc comments wifi: iwlwifi: fix prototype mismatch kernel-doc warnings wifi: iwlwifi: fix kernel-doc in iwl-fh.h wifi: iwlwifi: fix kernel-doc in iwl-trans.h wifi: iwlwifi: pcie: fix kernel-doc wifi: iwlwifi: dvm: fix kernel-doc warnings wifi: iwlwifi: mvm: don't log error for failed UATS table read wifi: iwlwifi: trans: make bad state warnings wifi: iwlwifi: fw: api: fix some kernel-doc wifi: iwlwifi: mvm: remove init_dbg module parameter wifi: iwlwifi: update the BA notification API wifi: iwlwifi: mvm: always unblock EMLSR on ROC end wifi: iwlwifi: mvm: use IWL_FW_CHECK for link ID check wifi: iwlwifi: mvm: don't flush BSSes on restart with MLD API ... ==================== Link: https://patch.msgid.link/20240627114135.28507-3-johannes@sipsolutions.netSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: e3f02f32 ("ionic: fix kernel panic due to multi-buffer handling") d9c04209 ("ionic: Mark error paths in the data path as unlikely") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wirelessJakub Kicinski authored
Johannes Berg says: ==================== Just a few changes: - maintainers: Larry Finger sadly passed away - maintainers: ath trees are in their group now - TXQ FQ quantum configuration fix - TI wl driver: work around stuck FW in AP mode - mac80211: disable softirqs in some new code needing that * tag 'wireless-2024-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: MAINTAINERS: wifi: update ath.git location MAINTAINERS: Remembering Larry Finger wifi: mac80211: disable softirqs for queued frame handling wifi: cfg80211: restrict NL80211_ATTR_TXQ_QUANTUM values wifi: wlcore: fix wlcore AP mode ==================== Link: https://patch.msgid.link/20240627083627.15312-3-johannes@sipsolutions.netSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from can, bpf and netfilter. There are a bunch of regressions addressed here, but hopefully nothing spectacular. We are still waiting the driver fix from Intel, mentioned by Jakub in the previous networking pull. Current release - regressions: - core: add softirq safety to netdev_rename_lock - tcp: fix tcp_rcv_fastopen_synack() to enter TCP_CA_Loss for failed TFO - batman-adv: fix RCU race at module unload time Previous releases - regressions: - openvswitch: get related ct labels from its master if it is not confirmed - eth: bonding: fix incorrect software timestamping report - eth: mlxsw: fix memory corruptions on spectrum-4 systems - eth: ionic: use dev_consume_skb_any outside of napi Previous releases - always broken: - netfilter: fully validate NFT_DATA_VALUE on store to data registers - unix: several fixes for OoB data - tcp: fix race for duplicate reqsk on identical SYN - bpf: - fix may_goto with negative offset - fix the corner case with may_goto and jump to the 1st insn - fix overrunning reservations in ringbuf - can: - j1939: recover socket queue on CAN bus error during BAM transmission - mcp251xfd: fix infinite loop when xmit fails - dsa: microchip: monitor potential faults in half-duplex mode - eth: vxlan: pull inner IP header in vxlan_xmit_one() - eth: ionic: fix kernel panic due to multi-buffer handling Misc: - selftest: unix tests refactor and a lot of new cases added" * tag 'net-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits) net: mana: Fix possible double free in error handling path selftest: af_unix: Check SIOCATMARK after every send()/recv() in msg_oob.c. af_unix: Fix wrong ioctl(SIOCATMARK) when consumed OOB skb is at the head. selftest: af_unix: Check EPOLLPRI after every send()/recv() in msg_oob.c selftest: af_unix: Check SIGURG after every send() in msg_oob.c selftest: af_unix: Add SO_OOBINLINE test cases in msg_oob.c af_unix: Don't stop recv() at consumed ex-OOB skb. selftest: af_unix: Add non-TCP-compliant test cases in msg_oob.c. af_unix: Don't stop recv(MSG_DONTWAIT) if consumed OOB skb is at the head. af_unix: Stop recv(MSG_PEEK) at consumed OOB skb. selftest: af_unix: Add msg_oob.c. selftest: af_unix: Remove test_unix_oob.c. tracing/net_sched: NULL pointer dereference in perf_trace_qdisc_reset() netfilter: nf_tables: fully validate NFT_DATA_VALUE on store to data registers net: usb: qmi_wwan: add Telit FN912 compositions tcp: fix tcp_rcv_fastopen_synack() to enter TCP_CA_Loss for failed TFO ionic: use dev_consume_skb_any outside of napi net: dsa: microchip: fix wrong register write when masking interrupt Fix race for duplicate reqsk on identical SYN ibmvnic: Add tx check to prevent skb leak ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "This became bigger than usual, as it receives a pile of pending ASoC fixes. Most of changes are for device-specific issues while there are a few core fixes that are all rather trivial: - DMA-engine sync fixes - Continued MIDI2 conversion fixes - Various ASoC Intel SOF fixes - A series of ASoC topology fixes for memory handling - AMD ACP fix, curing a recent regression, too - Platform / codec-specific fixes for mediatek, atmel, realtek, etc" * tag 'sound-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (40 commits) ASoC: rt5645: fix issue of random interrupt from push-button ALSA: seq: Fix missing MSB in MIDI2 SPP conversion ASoC: amd: yc: Fix non-functional mic on ASUS M5602RA ALSA: hda/realtek: fix mute/micmute LEDs don't work for EliteBook 645/665 G11. ALSA: hda/realtek: Fix conflicting quirk for PCI SSID 17aa:3820 ALSA: dmaengine_pcm: terminate dmaengine before synchronize ALSA: hda/relatek: Enable Mute LED on HP Laptop 15-gw0xxx ALSA: PCM: Allow resume only for suspended streams ALSA: seq: Fix missing channel at encoding RPN/NRPN MIDI2 messages ASoC: mediatek: mt8195: Add platform entry for ETDM1_OUT_BE dai link ASoC: fsl-asoc-card: set priv->pdev before using it ASoC: amd: acp: move chip->flag variable assignment ASoC: amd: acp: remove i2s configuration check in acp_i2s_probe() ASoC: amd: acp: add a null check for chip_pdev structure ASoC: Intel: soc-acpi: mtl: fix speaker no sound on Dell SKU 0C64 ASoC: q6apm-lpass-dai: close graph on prepare errors ASoC: cs35l56: Disconnect ASP1 TX sources when ASP1 DAI is hooked up ASoC: topology: Fix route memory corruption ASoC: rt722-sdca-sdw: add debounce time for type detection ASoC: SOF: sof-audio: Skip unprepare for in-use widgets on error rollback ...
-
Rameshkumar Sundaram authored
Commit 4a3c212e ("wifi: ath12k: add basic WoW functionalities") broke driver initialization, now mac registration is allowed only for devices that advertise WMI_TLV_SERVICE_WOW, but QCN9274 doesn't support WoW and hence mac registration is aborted and driver is de-initialized. Allow mac registration to proceed without WoW Support for devices that don't advertise WMI_TLV_SERVICE_WOW. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Fixes: 4a3c212e ("wifi: ath12k: add basic WoW functionalities") Signed-off-by:
Rameshkumar Sundaram <quic_ramess@quicinc.com> Acked-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfPaolo Abeni authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains two Netfilter fixes for net: Patch #1 fixes CONFIG_SYSCTL=n for a patch coming in the previous PR to move the sysctl toggle to enable SRv6 netfilter hooks from nf_conntrack to the core, from Jianguo Wu. Patch #2 fixes a possible pointer leak to userspace due to insufficient validation of NFT_DATA_VALUE. Linus found this pointer leak to userspace via zdi-disclosures@ and forwarded the notice to Netfilter maintainers, he appears as reporter because whoever found this issue never approached Netfilter maintainers neither via security@ nor in private. netfilter pull request 24-06-27 * tag 'nf-24-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: fully validate NFT_DATA_VALUE on store to data registers netfilter: fix undefined reference to 'netfilter_lwtunnel_*' when CONFIG_SYSCTL=n ==================== Link: https://patch.msgid.link/20240626233845.151197-1-pablo@netfilter.orgSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Ma Ke authored
When auxiliary_device_add() returns error and then calls auxiliary_device_uninit(), callback function adev_release calls kfree(madev). We shouldn't call kfree(madev) again in the error handling path. Set 'madev' to NULL. Fixes: a69839d4 ("net: mana: Add support for auxiliary device") Signed-off-by:
Ma Ke <make24@iscas.ac.cn> Link: https://patch.msgid.link/20240625130314.2661257-1-make24@iscas.ac.cnSigned-off-by:
-
Paolo Abeni authored
Kuniyuki Iwashima says: ==================== af_unix: Fix bunch of MSG_OOB bugs and add new tests. This series rewrites the selftest for AF_UNIX MSG_OOB and fixes bunch of bugs that AF_UNIX behaves differently compared to TCP. Note that the test discovered few more bugs in TCP side, which will be fixed in another series. ==================== Link: https://lore.kernel.org/r/20240625013645.45034-1-kuniyu@amazon.comSigned-off-by:
-
Kuniyuki Iwashima authored
To catch regression, let's check ioctl(SIOCATMARK) after every send() and recv() calls. Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by:
-
Kuniyuki Iwashima authored
Even if OOB data is recv()ed, ioctl(SIOCATMARK) must return 1 when the OOB skb is at the head of the receive queue and no new OOB data is queued. Without fix: # RUN msg_oob.no_peek.oob ... # msg_oob.c:305:oob:Expected answ[0] (0) == oob_head (1) # oob: Test terminated by assertion # FAIL msg_oob.no_peek.oob not ok 2 msg_oob.no_peek.oob With fix: # RUN msg_oob.no_peek.oob ... # OK msg_oob.no_peek.oob ok 2 msg_oob.no_peek.oob Fixes: 314001f0 ("af_unix: Add OOB support") Signed-off-by:
-
Kuniyuki Iwashima authored
When OOB data is in recvq, we can detect it with epoll by checking EPOLLPRI. This patch add checks for EPOLLPRI after every send() and recv() in all test cases. Signed-off-by:
-
Kuniyuki Iwashima authored
When data is sent with MSG_OOB, SIGURG is sent to a process if the receiver socket has set its owner to the process by ioctl(FIOSETOWN) or fcntl(F_SETOWN). This patch adds SIGURG check after every send(MSG_OOB) call. Signed-off-by:
-
Kuniyuki Iwashima authored
When SO_OOBINLINE is enabled on a socket, MSG_OOB can be recv()ed without MSG_OOB flag, and ioctl(SIOCATMARK) will behaves differently. This patch adds some test cases for SO_OOBINLINE. Note the new test cases found two bugs in TCP. 1) After reading OOB data with non-inline mode, we can re-read the data by setting SO_OOBINLINE. # RUN msg_oob.no_peek.inline_oob_ahead_break ... # msg_oob.c:146:inline_oob_ahead_break:AF_UNIX :world # msg_oob.c:147:inline_oob_ahead_break:TCP :oworld # OK msg_oob.no_peek.inline_oob_ahead_break ok 14 msg_oob.no_peek.inline_oob_ahead_break 2) The head OOB data is dropped if SO_OOBINLINE is disabled if a new OOB data is queued. # RUN msg_oob.no_peek.inline_ex_oob_drop ... # msg_oob.c:171:inline_ex_oob_drop:AF_UNIX :x # msg_oob.c:172:inline_ex_oob_drop:TCP :y # msg_oob.c:146:inline_ex_oob_drop:AF_UNIX :y # msg_oob.c:147:inline_ex_oob_drop:TCP :Resource temporarily unavailable # OK msg_oob.no_peek.inline_ex_oob_drop ok 17 msg_oob.no_peek.inline_ex_oob_drop Signed-off-by:
-
