- 03 Jun, 2020 26 commits
-
-
Chuhong Yuan authored
[ Upstream commit ff8ce319 ] This driver calls kthread_run() in probe, but forgets to call kthread_stop() in probe failure and remove. Add the missed kthread_stop() to fix it. Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Andrew Oakley authored
[ Upstream commit da7a8f1a ] This is another TRX40 based motherboard with ALC1220-VB USB-audio that requires a static mapping table. This motherboard also has a PCI device which advertises no codecs. The PCI ID is 1022:1487 and PCI SSID is 1022:d102. As this is using the AMD vendor ID, don't blacklist for now in case other boards have a working audio device with the same ssid. alsa-info.sh report for this board: http://alsa-project.org/db/?f=0a742f89066527497b77ce16bca486daccf8a70cSigned-off-by:
Andrew Oakley <andrew@adoakley.name> Link: https://lore.kernel.org/r/20200503141639.35519-1-andrew@adoakley.nameSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Stephen Warren authored
[ Upstream commit 0cf253ee ] The driver currently leaves GPIO IRQs unmasked even when the GPIO IRQ client has released the GPIO IRQ. This allows the HW to raise IRQs, and SW to process them, after shutdown. Fix this by masking the IRQ when it's shut down. This is usually taken care of by the irqchip core, but since this driver has a custom irq_shutdown implementation, it must do this explicitly itself. Signed-off-by:
Stephen Warren <swarren@nvidia.com> Link: https://lore.kernel.org/r/20200427232605.11608-1-swarren@wwwdotorg.orgSigned-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Johan Jonker authored
[ Upstream commit 855bdca1 ] A test with the command below gives these errors: arch/arm/boot/dts/rk3229-evb.dt.yaml: spi-0: '#address-cells' is a required property arch/arm/boot/dts/rk3229-evb.dt.yaml: spi-1: '#address-cells' is a required property arch/arm/boot/dts/rk3229-xms6.dt.yaml: spi-0: '#address-cells' is a required property arch/arm/boot/dts/rk3229-xms6.dt.yaml: spi-1: '#address-cells' is a required property The $nodename pattern for spi nodes is "^spi(@.*|-[0-9a-f])*$". To prevent warnings rename 'spi-0' and 'spi-1' pinctrl sub nodenames to 'spi0' and 'spi1' in 'rk322x.dtsi'. make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/spi/spi-controller.yaml Signed-off-by:
Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200424123923.8192-1-jbx6244@gmail.comSigned-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Johan Jonker authored
[ Upstream commit b14f3898 ] Dts files with Rockchip 'gpu' nodes were manually verified. In order to automate this process arm,mali-utgard.txt has been converted to yaml. In the new setup dtbs_check with arm,mali-utgard.yaml expects clock-names values in the same order, so fix that. Signed-off-by:
-
Johan Jonker authored
[ Upstream commit c604fd81 ] Dts files with Rockchip rk3399 'gpu' nodes were manually verified. In order to automate this process arm,mali-midgard.txt has been converted to yaml. In the new setup dtbs_check with arm,mali-midgard.yaml expects interrupts and interrupt-names values in the same order. Fix this for rk3399. make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/gpu/ arm,mali-midgard.yaml Signed-off-by:
-
Johan Jonker authored
[ Upstream commit c617ed88 ] The status was removed of the '&gmac2phy' node with the apply of a patch long time ago, so fix status for '&gmac2phy' in 'rk3328-evb.dts'. Signed-off-by:
-
Johan Jonker authored
[ Upstream commit 287e0d53 ] A test with the command below gives for example this error: arch/arm/boot/dts/rk3228-evb.dt.yaml: phy@0: '#phy-cells' is a required property The phy nodename is normally used by a phy-handle. This node is however compatible with "ethernet-phy-id1234.d400", "ethernet-phy-ieee802.3-c22" which is just been added to 'ethernet-phy.yaml'. So change nodename to 'ethernet-phy' for which '#phy-cells' is not a required property make ARCH=arm dtbs_check DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/ phy/phy-provider.yaml Signed-off-by:
-
Jiri Pirko authored
commit 4340f42f upstream. In case of reload fail, the mlxsw_sp->ports contains a pointer to a freed memory (either by reload_down() or reload_up() error path). Fix this by initializing the pointer to NULL and checking it before dereferencing in split/unsplit/type_set callpaths. Fixes: 24cc68ad ("mlxsw: core: Add support for reload") Reported-by:
Danielle Ratson <danieller@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Qiushi Wu authored
commit febfd9d3 upstream. In function mlx4_opreq_action(), pointer "mailbox" is not released, when mlx4_cmd_box() return and error, causing a memory leak bug. Fix this issue by going to "out" label, mlx4_free_cmd_mailbox() can free this pointer. Fixes: fe6f700d ("net/mlx4_core: Respond to operation request by firmware") Signed-off-by:
Qiushi Wu <wu000273@umn.edu> Signed-off-by:
-
Qiushi Wu authored
commit 5a730153 upstream. In cas_init_one(), "pdev" is requested by "pci_request_regions", but it was not released after a call of the function “pci_write_config_byte” failed. Thus replace the jump target “err_write_cacheline” by "err_out_free_res". Fixes: 1f26dac3 ("[NET]: Add Sun Cassini driver.") Signed-off-by:
-
Roi Dayan authored
commit 9ca41539 upstream. Invoke mutex_destroy() to catch any errors. Fixes: 2cc43b49 ("net/mlx5_core: Managing root flow table") Signed-off-by:
Roi Dayan <roid@mellanox.com> Reviewed-by:
Mark Bloch <markb@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Moshe Shemesh authored
[ Upstream commit 5e911e2c ] On sq closure when we free its descriptors, we should also update netdev txq on completions which would not arrive. Otherwise if we reopen sqs and attach them back, for example on fw fatal recovery flow, we may get tx timeout. Fixes: 29429f33 ("net/mlx5e: Timeout if SQ doesn't flush during close") Signed-off-by:
Moshe Shemesh <moshe@mellanox.com> Reviewed-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Jere Leppänen authored
[ Upstream commit d3e8e4c1 ] Commit bdf6fa52 ("sctp: handle association restarts when the socket is closed.") starts shutdown when an association is restarted, if in SHUTDOWN-PENDING state and the socket is closed. However, the rationale stated in that commit applies also when in SHUTDOWN-SENT state - we don't want to move an association to ESTABLISHED state when the socket has been closed, because that results in an association that is unreachable from user space. The problem scenario: 1. Client crashes and/or restarts. 2. Server (using one-to-one socket) calls close(). SHUTDOWN is lost. 3. Client reconnects using the same addresses and ports. 4. Server's association is restarted. The association and the socket move to ESTABLISHED state, even though the server process has closed its descriptor. Also, after step 4 when the server process exits, some resources are leaked in an attempt to release the underlying inet sock structure in ESTABLISHED state: IPv4: Attempt to release TCP socket in state 1 00000000377288c7 Fix by acting the same way as in SHUTDOWN-PENDING state. That is, if an association is restarted in SHUTDOWN-SENT state and the socket is closed, then start shutdown and don't move the association or the socket to ESTABLISHED state. Fixes: bdf6fa52 ("sctp: handle association restarts when the socket is closed.") Signed-off-by:
Jere Leppänen <jere.leppanen@nokia.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Neil Horman authored
[ Upstream commit 20a785aa ] This BUG halt was reported a while back, but the patch somehow got missed: PID: 2879 TASK: c16adaa0 CPU: 1 COMMAND: "sctpn" #0 [f418dd28] crash_kexec at c04a7d8c #1 [f418dd7c] oops_end at c0863e02 #2 [f418dd90] do_invalid_op at c040aaca #3 [f418de28] error_code (via invalid_op) at c08631a5 EAX: f34baac0 EBX: 00000090 ECX: f418deb0 EDX: f5542950 EBP: 00000000 DS: 007b ESI: f34ba800 ES: 007b EDI: f418dea0 GS: 00e0 CS: 0060 EIP: c046fa5e ERR: ffffffff EFLAGS: 00010286 #4 [f418de5c] add_timer at c046fa5e #5 [f418de68] sctp_do_sm at f8db8c77 [sctp] #6 [f418df30] sctp_primitive_SHUTDOWN at f8dcc1b5 [sctp] #7 [f418df48] inet_shutdown at c080baf9 #8 [f418df5c] sys_shutdown at c079eedf #9 [f418df70] sys_socketcall at c079fe88 EAX: ffffffda EBX: 0000000d ECX: bfceea90 EDX: 0937af98 DS: 007b ESI: 0000000c ES: 007b EDI: b7150ae4 SS: 007b ESP: bfceea7c EBP: bfceeaa8 GS: 0033 CS: 0073 EIP: b775c424 ERR: 00000066 EFLAGS: 00000282 It appears that the side effect that starts the shutdown timer was processed multiple times, which can happen as multiple paths can trigger it. This of course leads to the BUG halt in add_timer getting called. Fix seems pretty straightforward, just check before the timer is added if its already been started. If it has mod the timer instead to min(current expiration, new expiration) Its been tested but not confirmed to fix the problem, as the issue has only occured in production environments where test kernels are enjoined from being installed. It appears to be a sane fix to me though. Also, recentely, Jere found a reproducer posted on list to confirm that this resolves the issues Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> CC: Vlad Yasevich <vyasevich@gmail.com> CC: "David S. Miller" <davem@davemloft.net> CC: jere.leppanen@nokia.com CC: marcelo.leitner@gmail.com CC: netdev@vger.kernel.org Acked-by:
-
Marc Payne authored
[ Upstream commit c27a2043 ] Device id 0927 is the RTL8153B-based component of the 'Surface USB-C to Ethernet and USB Adapter' and may be used as a component of other devices in future. Tested and working with the r8152 driver. Update the cdc_ether blacklist due to the RTL8153 'network jam on suspend' issue which this device will cause (personally confirmed). Signed-off-by:
Marc Payne <marc.payne@mdpsys.co.uk> Signed-off-by:
-
Roman Mashak authored
[ Upstream commit b15e6263 ] When a new action is installed, firstuse field of 'tcf_t' is explicitly set to 0. Value of zero means "new action, not yet used"; as a packet hits the action, 'firstuse' is stamped with the current jiffies value. tcf_tm_dump() should return 0 for firstuse if action has not yet been hit. Fixes: 48d8ee16 ("net sched actions: aggregate dumping of actions timeinfo") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
Roman Mashak <mrv@mojatatu.com> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Yuqi Jin authored
[ Upstream commit a6211caa ] Commit adb03115 ("net: get rid of an signed integer overflow in ip_idents_reserve()") used atomic_cmpxchg to replace "atomic_add_return" inside the function "ip_idents_reserve". The reason was to avoid UBSAN warning. However, this change has caused performance degrade and in GCC-8, fno-strict-overflow is now mapped to -fwrapv -fwrapv-pointer and signed integer overflow is now undefined by default at all optimization levels[1]. Moreover, it was a bug in UBSAN vs -fwrapv /-fno-strict-overflow, so Let's revert it safely. [1] https://gcc.gnu.org/gcc-8/changes.htmlSuggested-by:
Peter Zijlstra <peterz@infradead.org> Suggested-by:
Eric Dumazet <edumazet@google.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Jiri Pirko <jiri@resnulli.us> Cc: Arvind Sankar <nivedita@alum.mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Eric Dumazet <edumazet@google.com> Cc: Jiong Wang <jiongwang@huawei.com> Signed-off-by:
Yuqi Jin <jinyuqi@huawei.com> Signed-off-by:
Shaokun Zhang <zhangshaokun@hisilicon.com> Signed-off-by:
-
Manivannan Sadhasivam authored
[ Upstream commit d28ea1fb ] Once the traversal of the list is completed with list_for_each_entry(), the iterator (node) will point to an invalid object. So passing this to qrtr_local_enqueue() which is outside of the iterator block is erroneous eventhough the object is not used. So fix this by passing NULL to qrtr_local_enqueue(). Fixes: bdabad3e ("net: Add Qualcomm IPC router") Reported-by:
kbuild test robot <lkp@intel.com> Reported-by:
Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
Moshe Shemesh authored
[ Upstream commit 17d00e83 ] When FW response to commands is very slow and all command entries in use are waiting for completion we can have a race where commands can get timeout before they get out of the queue and handled. Timeout completion on uninitialized command will cause releasing command's buffers before accessing it for initialization and then we will get NULL pointer exception while trying access it. It may also cause releasing buffers of another command since we may have timeout completion before even allocating entry index for this command. Add entry handling completion to avoid this race. Fixes: e126ba97 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by:
Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by:
-
Vadim Fedorenko authored
[ Upstream commit 57ebc8f0 ] In case of error with MPLS support the code is misusing AF_INET instead of AF_MPLS. Fixes: 1b69e7e6 ("ipip: support MPLS over IPv4") Signed-off-by:
Vadim Fedorenko <vfedorenko@novek.ru> Signed-off-by:
-
Martin KaFai Lau authored
[ Upstream commit 88d7fcfa ] The commit 637bc8bb ("inet: reset tb->fastreuseport when adding a reuseport sk") added a bind-address cache in tb->fast*. The tb->fast* caches the address of a sk which has successfully been binded with SO_REUSEPORT ON. The idea is to avoid the expensive conflict search in inet_csk_bind_conflict(). There is an issue with wildcard matching where sk_reuseport_match() should have returned false but it is currently returning true. It ends up hiding bind conflict. For example, bind("[::1]:443"); /* without SO_REUSEPORT. Succeed. */ bind("[::2]:443"); /* with SO_REUSEPORT. Succeed. */ bind("[::]:443"); /* with SO_REUSEPORT. Still Succeed where it shouldn't */ The last bind("[::]:443") with SO_REUSEPORT on should have failed because it should have a conflict with the very first bind("[::1]:443") which has SO_REUSEPORT off. However, the address "[::2]" is cached in tb->fast* in the second bind. In the last bind, the sk_reuseport_match() returns true because the binding sk's wildcard addr "[::]" matches with the "[::2]" cached in tb->fast*. The correct bind conflict is reported by removing the second bind such that tb->fast* cache is not involved and forces the bind("[::]:443") to go through the inet_csk_bind_conflict(): bind("[::1]:443"); /* without SO_REUSEPORT. Succeed. */ bind("[::]:443"); /* with SO_REUSEPORT. -EADDRINUSE */ The expected behavior for sk_reuseport_match() is, it should only allow the "cached" tb->fast* address to be used as a wildcard match but not the address of the binding sk. To do that, the current "bool match_wildcard" arg is split into "bool match_sk1_wildcard" and "bool match_sk2_wildcard". This change only affects the sk_reuseport_match() which is only used by inet_csk (e.g. TCP). The other use cases are calling inet_rcv_saddr_equal() and this patch makes it pass the same "match_wildcard" arg twice to the "ipv[46]_rcv_saddr_equal(..., match_wildcard, match_wildcard)". Cc: Josef Bacik <jbacik@fb.com> Fixes: 637bc8bb ("inet: reset tb->fastreuseport when adding a reuseport sk") Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Signed-off-by:
-
Boris Sukholitko authored
[ Upstream commit c0bbbdc3 ] __netif_receive_skb_core may change the skb pointer passed into it (e.g. in rx_handler). The original skb may be freed as a result of this operation. The callers of __netif_receive_skb_core may further process original skb by using pt_prev pointer returned by __netif_receive_skb_core thus leading to unpleasant effects. The solution is to pass skb by reference into __netif_receive_skb_core. v2: Added Fixes tag and comment regarding ppt_prev and skb invariant. Fixes: 88eb1944 ("net: core: propagate SKB lists through packet_type lookup") Signed-off-by:
Boris Sukholitko <boris.sukholitko@broadcom.com> Acked-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
-
DENG Qingfang authored
[ Upstream commit 5e5502e0 ] When a client moves from a DSA user port to a software port in a bridge, it cannot reach any other clients that connected to the DSA user ports. That is because SA learning on the CPU port is disabled, so the switch ignores the client's frames from the CPU port and still thinks it is at the user port. Fix it by enabling SA learning on the CPU port. To prevent the switch from learning from flooding frames from the CPU port, set skb->offload_fwd_mark to 1 for unicast and broadcast frames, and let the switch flood them instead of trapping to the CPU port. Multicast frames still need to be trapped to the CPU port for snooping, so set the SA_DIS bit of the MTK tag to 1 when transmitting those frames to disable SA learning. Fixes: b8f126a8 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Signed-off-by:
DENG Qingfang <dqfext@gmail.com> Signed-off-by:
-
Vladimir Oltean authored
[ Upstream commit 5d14c304 ] The dpaa-eth driver probes on compatible string for the MAC node, and the fman/mac.c driver allocates a dpaa-ethernet platform device that triggers the probing of the dpaa-eth net device driver. All of this is fine, but the problem is that the struct device of the dpaa_eth net_device is 2 parents away from the MAC which can be referenced via of_node. So of_find_net_device_by_node can't find it, and DSA switches won't be able to probe on top of FMan ports. It would be a bit silly to modify a core function (of_find_net_device_by_node) to look for dev->parent->parent->of_node just for one driver. We're just 1 step away from implementing full recursion. Actually there have already been at least 2 previous attempts to make this work: - Commit a1a50c8e ("fsl/man: Inherit parent device and of_node") - One or more of the patches in "[v3,0/6] adapt DPAA drivers for DSA": https://patchwork.ozlabs.org/project/netdev/cover/1508178970-28945-1-git-send-email-madalin.bucur@nxp.com/ (I couldn't really figure out which one was supposed to solve the problem and how). Point being, it looks like this is still pretty much a problem today. On T1040, the /sys/class/net/eth0 symlink currently points to ../../devices/platform/ffe000000.soc/ffe400000.fman/ffe4e6000.ethernet/dpaa-ethernet.0/net/eth0 which pretty much illustrates the problem. The closest of_node we've got is the "fsl,fman-memac" at /soc@ffe000000/fman@400000/ethernet@e6000, which is what we'd like to be able to reference from DSA as host port. For of_find_net_device_by_node to find the eth0 port, we would need the parent of the eth0 net_device to not be the "dpaa-ethernet" platform device, but to point 1 level higher, aka the "fsl,fman-memac" node directly. The new sysfs path would look like this: ../../devices/platform/ffe000000.soc/ffe400000.fman/ffe4e6000.ethernet/net/eth0 And this is exactly what SET_NETDEV_DEV does. It sets the parent of the net_device. The new parent has an of_node associated with it, and of_dev_node_match already checks for the of_node of the device or of its parent. Fixes: a1a50c8e ("fsl/man: Inherit parent device and of_node") Fixes: c6e26ea8 ("dpaa_eth: change device used") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 687775ce ] syzbot was able to trigger this trace [1], probably by using a zero optlen. While we are at it, cap optlen to IFNAMSIZ - 1 instead of IFNAMSIZ. [1] BUG: KMSAN: uninit-value in strnlen+0xf9/0x170 lib/string.c:569 CPU: 0 PID: 8807 Comm: syz-executor483 Not tainted 5.7.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:121 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 strnlen+0xf9/0x170 lib/string.c:569 dev_name_hash net/core/dev.c:207 [inline] netdev_name_node_lookup net/core/dev.c:277 [inline] __dev_get_by_name+0x75/0x2b0 net/core/dev.c:778 ax25_setsockopt+0xfa3/0x1170 net/ax25/af_ax25.c:654 __compat_sys_setsockopt+0x4ed/0x910 net/compat.c:403 __do_compat_sys_setsockopt net/compat.c:413 [inline] __se_compat_sys_setsockopt+0xdd/0x100 net/compat.c:410 __ia32_compat_sys_setsockopt+0x62/0x80 net/compat.c:410 do_syscall_32_irqs_on arch/x86/entry/common.c:339 [inline] do_fast_syscall_32+0x3bf/0x6d0 arch/x86/entry/common.c:398 entry_SYSENTER_compat+0x68/0x77 arch/x86/entry/entry_64_compat.S:139 RIP: 0023:0xf7f57dd9 Code: 90 e8 0b 00 00 00 f3 90 0f ae e8 eb f9 8d 74 26 00 89 3c 24 c3 90 90 90 90 90 90 90 90 90 90 90 90 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 eb 0d 90 90 90 90 90 90 90 90 90 90 90 90 RSP: 002b:00000000ffae8c1c EFLAGS: 00000217 ORIG_RAX: 000000000000016e RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000000101 RDX: 0000000000000019 RSI: 0000000020000000 RDI: 0000000000000004 RBP: 0000000000000012 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 Local variable ----devname@ax25_setsockopt created at: ax25_setsockopt+0xe6/0x1170 net/ax25/af_ax25.c:536 ax25_setsockopt+0xe6/0x1170 net/ax25/af_ax25.c:536 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
- 27 May, 2020 14 commits
-
-
Greg Kroah-Hartman authored
-
David Howells authored
[ Upstream commit 441fdee1 ] The Rx protocol has a "previousPacket" field in it that is not handled in the same way by all protocol implementations. Sometimes it contains the serial number of the last DATA packet received, sometimes the sequence number of the last DATA packet received and sometimes the highest sequence number so far received. AF_RXRPC is using this to weed out ACKs that are out of date (it's possible for ACK packets to get reordered on the wire), but this does not work with OpenAFS which will just stick the sequence number of the last packet seen into previousPacket. The issue being seen is that big AFS FS.StoreData RPC (eg. of ~256MiB) are timing out when partly sent. A trace was captured, with an additional tracepoint to show ACKs being discarded in rxrpc_input_ack(). Here's an excerpt showing the problem. 52873.203230: rxrpc_tx_data: c=000004ae DATA ed1a3584:00000002 0002449c q=00024499 fl=09 A DATA packet with sequence number 00024499 has been transmitted (the "q=" field). ... 52873.243296: rxrpc_rx_ack: c=000004ae 00012a2b DLY r=00024499 f=00024497 p=00024496 n=0 52873.243376: rxrpc_rx_ack: c=000004ae 00012a2c IDL r=0002449b f=00024499 p=00024498 n=0 52873.243383: rxrpc_rx_ack: c=000004ae 00012a2d OOS r=0002449d f=00024499 p=0002449a n=2 The Out-Of-Sequence ACK indicates that the server didn't see DATA sequence number 00024499, but did see seq 0002449a (previousPacket, shown as "p=", skipped the number, but firstPacket, "f=", which shows the bottom of the window is set at that point). 52873.252663: rxrpc_retransmit: c=000004ae q=24499 a=02 xp=14581537 52873.252664: rxrpc_tx_data: c=000004ae DATA ed1a3584:00000002 000244bc q=00024499 fl=0b *RETRANS* The packet has been retransmitted. Retransmission recurs until the peer says it got the packet. 52873.271013: rxrpc_rx_ack: c=000004ae 00012a31 OOS r=000244a1 f=00024499 p=0002449e n=6 More OOS ACKs indicate that the other packets that are already in the transmission pipeline are being received. The specific-ACK list is up to 6 ACKs and NAKs. ... 52873.284792: rxrpc_rx_ack: c=000004ae 00012a49 OOS r=000244b9 f=00024499 p=000244b6 n=30 52873.284802: rxrpc_retransmit: c=000004ae q=24499 a=0a xp=63505500 52873.284804: rxrpc_tx_data: c=000004ae DATA ed1a3584:00000002 000244c2 q=00024499 fl=0b *RETRANS* 52873.287468: rxrpc_rx_ack: c=000004ae 00012a4a OOS r=000244ba f=00024499 p=000244b7 n=31 52873.287478: rxrpc_rx_ack: c=000004ae 00012a4b OOS r=000244bb f=00024499 p=000244b8 n=32 At this point, the server's receive window is full (n=32) with presumably 1 NAK'd packet and 31 ACK'd packets. We can't transmit any more packets. 52873.287488: rxrpc_retransmit: c=000004ae q=24499 a=0a xp=61327980 52873.287489: rxrpc_tx_data: c=000004ae DATA ed1a3584:00000002 000244c3 q=00024499 fl=0b *RETRANS* 52873.293850: rxrpc_rx_ack: c=000004ae 00012a4c DLY r=000244bc f=000244a0 p=00024499 n=25 And now we've received an ACK indicating that a DATA retransmission was received. 7 packets have been processed (the occupied part of the window moved, as indicated by f= and n=). 52873.293853: rxrpc_rx_discard_ack: c=000004ae r=00012a4c 000244a0<00024499 00024499<000244b8 However, the DLY ACK gets discarded because its previousPacket has gone backwards (from p=000244b8, in the ACK at 52873.287478 to p=00024499 in the ACK at 52873.293850). We then end up in a continuous cycle of retransmit/discard. kafs fails to update its window because it's discarding the ACKs and can't transmit an extra packet that would clear the issue because the window is full. OpenAFS doesn't change the previousPacket value in the ACKs because no new DATA packets are received with a different previousPacket number. Fix this by altering the discard check to only discard an ACK based on previousPacket if there was no advance in the firstPacket. This allows us to transmit a new packet which will cause previousPacket to advance in the next ACK. The check, however, needs to allow for the possibility that previousPacket may actually have had the serial number placed in it instead - in which case it will go outside the window and we should ignore it. Fixes: 1a2391c3 ("rxrpc: Fix detection of out of order acks") Reported-by:
Dave Botsch <botsch@cnf.cornell.edu> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
David Howells authored
[ Upstream commit d1f12947 ] Add a tracepoint to track received ACKs that are discarded due to being outside of the Tx window. Signed-off-by:
-
Fabrice Gasnier authored
[ Upstream commit b455d06e ] DMA channel request should use device struct from platform device struct. Currently it's using iio device struct. But at this stage when probing, device struct isn't yet registered (e.g. device_register is done in iio_device_register). Since commit 71723a96 ("dmaengine: Create symlinks between DMA channels and slaves"), a warning message is printed as the links in sysfs can't be created, due to device isn't yet registered: - Cannot create DMA slave symlink - Cannot create DMA dma:rx symlink Fix this by using device struct from platform device to request dma chan. Fixes: eca94980 ("IIO: ADC: add stm32 DFSDM support for PDM microphone") Signed-off-by:
Fabrice Gasnier <fabrice.gasnier@st.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Peter Ujfalusi authored
[ Upstream commit a9ab624e ] dma_request_slave_channel() is a wrapper on top of dma_request_chan() eating up the error code. By using dma_request_chan() directly the driver can support deferred probing against DMA. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by:
Olivier Moysan <olivier.moysan@st.com> Acked-by:
-
Fabrice Gasnier authored
[ Upstream commit 52cd91c2 ] DMA channel request should use device struct from platform device struct. Currently it's using iio device struct. But at this stage when probing, device struct isn't yet registered (e.g. device_register is done in iio_device_register). Since commit 71723a96 ("dmaengine: Create symlinks between DMA channels and slaves"), a warning message is printed as the links in sysfs can't be created, due to device isn't yet registered: - Cannot create DMA slave symlink - Cannot create DMA dma:rx symlink Fix this by using device struct from platform device to request dma chan. Fixes: 2763ea05 ("iio: adc: stm32: add optional dma support") Signed-off-by:
-
Peter Ujfalusi authored
[ Upstream commit 735404b8 ] dma_request_slave_channel() is a wrapper on top of dma_request_chan() eating up the error code. By using dma_request_chan() directly the driver can support deferred probing against DMA. Signed-off-by:
-
Josh Poimboeuf authored
commit 187b96db upstream. Normally, show_trace_log_lvl() scans the stack, looking for text addresses to print. In parallel, it unwinds the stack with unwind_next_frame(). If the stack address matches the pointer returned by unwind_get_return_address_ptr() for the current frame, the text address is printed normally without a question mark. Otherwise it's considered a breadcrumb (potentially from a previous call path) and it's printed with a question mark to indicate that the address is unreliable and typically can be ignored. Since the following commit: f1d9a2ab ("x86/unwind/orc: Don't skip the first frame for inactive tasks") ... for inactive tasks, show_trace_log_lvl() prints *only* unreliable addresses (prepended with '?'). That happens because, for the first frame of an inactive task, unwind_get_return_address_ptr() returns the wrong return address pointer: one word *below* the task stack pointer. show_trace_log_lvl() starts scanning at the stack pointer itself, so it never finds the first 'reliable' address, causing only guesses to being printed. The first frame of an inactive task isn't a normal stack frame. It's actually just an instance of 'struct inactive_task_frame' which is left behind by __switch_to_asm(). Now that this inactive frame is actually exposed to callers, fix unwind_get_return_address_ptr() to interpret it properly. Fixes: f1d9a2ab ("x86/unwind/orc: Don't skip the first frame for inactive tasks") Reported-by:
Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
-
Qiushi Wu authored
commit f45d01f4 upstream. A ticket was not released after a call of the function "rxkad_decrypt_ticket" failed. Thus replace the jump target "temporary_error_free_resp" by "temporary_error_free_ticket". Fixes: 8c2f826d ("rxrpc: Don't put crypto buffers on the stack") Signed-off-by:
-
John Hubbard authored
commit ffca476a upstream. In the case of get_user_pages_fast() returning fewer pages than requested, rio_dma_transfer() does not quite do the right thing. It attempts to release all the pages that were requested, rather than just the pages that were pinned. Fix the error handling so that only the pages that were successfully pinned are released. Fixes: e8de3701 ("rapidio: add mport char device driver") Signed-off-by:
John Hubbard <jhubbard@nvidia.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Reviewed-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Wei Yongjun authored
commit 13331747 upstream. Fix to return negative error code -ENOMEM from the ioremap() error handling case instead of 0, as done elsewhere in this function. Fixes: 43986798 ("ipack: add error handling for ioremap_nocache") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Cc: stable <stable@vger.kernel.org> Acked-by:
Samuel Iglesias Gonsalvez <siglesias@igalia.com> Link: https://lore.kernel.org/r/20200507094237.13599-1-weiyongjun1@huawei.comSigned-off-by:
-
Alexander Usyskin authored
commit fc9c03ce upstream. Allow me_cl object to be freed by releasing the reference that was acquired by one of the search functions: __mei_me_cl_by_uuid_id() or __mei_me_cl_by_uuid() Cc: <stable@vger.kernel.org> Reported-by:
亿一 <teroincn@gmail.com> Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20200512223140.32186-1-tomas.winkler@intel.comSigned-off-by:
-
Klaus Doth authored
commit 7a839dba upstream. DMA transfers to and from the SD card stall for 10 seconds and run into timeout on RTS5260 card readers after ASPM was enabled. Adding a short msleep after disabling ASPM fixes the issue on several Dell Precision 7530/7540 systems I tested. This function is only called when waking up after the chip went into power-save after not transferring data for a few seconds. The added msleep does therefore not change anything in data transfer speed or induce any excessive waiting while data transfers are running, or the chip is sleeping. Only the transition from sleep to active is affected. Signed-off-by:
Klaus Doth <kdlnx@doth.eu> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/4434eaa7-2ee3-a560-faee-6cee63ebd6d4@doth.euSigned-off-by:
-
Christophe JAILLET authored
commit aad4742f upstream. A call to 'vf610_dac_exit()' is missing in an error handling path. Fixes: 1b983bf4 ("iio: dac: vf610_dac: Add IIO DAC driver for Vybrid SoC") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: <Stable@vger.kernel.org> Signed-off-by:
-
