- 23 Jun, 2015 26 commits
-
-
Dan Williams authored
commit 4d66e5e9 upstream. ================================= [ INFO: inconsistent lock state ] 4.1.0-rc7+ #217 Tainted: G O --------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. swapper/6/0 [HC0[0]:SC1[1]:HE1:SE0] takes: (ext_devt_lock){+.?...}, at: [<ffffffff8143a60c>] blk_free_devt+0x3c/0x70 {SOFTIRQ-ON-W} state was registered at: [<ffffffff810bf6b1>] __lock_acquire+0x461/0x1e70 [<ffffffff810c1947>] lock_acquire+0xb7/0x290 [<ffffffff818ac3a8>] _raw_spin_lock+0x38/0x50 [<ffffffff8143a07d>] blk_alloc_devt+0x6d/0xd0 <-- take the lock in process context [..] [<ffffffff810bf64e>] __lock_acquire+0x3fe/0x1e70 [<ffffffff810c00ad>] ? __lock_acquire+0xe5d/0x1e70 [<ffffffff810c1947>] lock_acquire+0xb7/0x290 [<ffffffff8143a60c>] ? blk_free_devt+0x3c/0x70 [<ffffffff818ac3a8>] _raw_spin_lock+0x38/0x50 [<ffffffff8143a60c>] ? blk_free_devt+0x3c/0x70 [<ffffffff8143a60c>] blk_free_devt+0x3c/0x70 <-- take the lock in softirq [<ffffffff8143bfec>] part_release+0x1c/0x50 [<ffffffff8158edf6>] device_release+0x36/0xb0 [<ffffffff8145ac2b>] kobject_cleanup+0x7b/0x1a0 [<ffffffff8145aad0>] kobject_put+0x30/0x70 [<ffffffff8158f147>] put_device+0x17/0x20 [<ffffffff8143c29c>] delete_partition_rcu_cb+0x16c/0x180 [<ffffffff8143c130>] ? read_dev_sector+0xa0/0xa0 [<ffffffff810e0e0f>] rcu_process_callbacks+0x2ff/0xa90 [<ffffffff810e0dcf>] ? rcu_process_callbacks+0x2bf/0xa90 [<ffffffff81067e2e>] __do_softirq+0xde/0x600 Neil sees this in his tests and it also triggers on pmem driver unbind for the libnvdimm tests. This fix is on top of an initial fix by Keith for incorrect usage of mutex_lock() in this path: 2da78092 "block: Fix dev_t minor allocation lifetime". Both this and 2da78092 are candidates for -stable. Fixes: 2da78092 ("block: Fix dev_t minor allocation lifetime") Cc: Keith Busch <keith.busch@intel.com> Reported-by:
NeilBrown <neilb@suse.de> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Hans de Goede authored
commit 5f0ee9d1 upstream. Make the check to skip the rate check more lax, so that it applies to all hw_version 4 models. This fixes the touchpad not being detected properly on Asus PU551LA laptops. Reported-and-tested-by:
David Zafra Gómez <dezeta@klo.es> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Peter Hutterer authored
commit 7f2ca8b5 upstream. https://bugzilla.redhat.com/show_bug.cgi?id=1223051#c2 Tested-by: tommy.gagnes@gmail.com Signed-off-by:
Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by:
-
Clemens Ladisch authored
commit 044bddb9 upstream. Add mixer control names for the ESI Maya44 USB+ (which appears to be identical width the AudioTrak Maya44 USB). Reported-by:
nightmixes <nightmixes@gmail.com> Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Wolfram Sang authored
commit 1ef9f058 upstream. Fix this from the logs: usb 7-1: New USB device found, idVendor=046d, idProduct=08ca ... usb 7-1: Warning! Unlikely big volume range (=3072), cval->res is probably wrong. usb 7-1: [5] FU [Mic Capture Volume] ch = 1, val = 4608/7680/1 Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Takashi Iwai authored
commit b5d724b1 upstream. Acer Aspire 9420 with ALC883 (1025:0107) needs the fixup for EAPD to make the sound working like other Aspire models. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=94111Signed-off-by:
-
Laura Abbott authored
commit 72586c60 upstream. Commit 32f13521 ("n_tty: Line copy to user buffer in canonical mode") changed cannonical mode copying to use copy_to_user but missed adding the call to the audit framework. Add in the appropriate functions to get audit support. Fixes: 32f13521 ("n_tty: Line copy to user buffer in canonical mode") Reported-by:
Miloslav Trmač <mitr@redhat.com> Signed-off-by:
Laura Abbott <labbott@fedoraproject.org> Reviewed-by:
Peter Hurley <peter@hurleysoftware.com> Signed-off-by:
-
Paul Cercueil authored
commit c2a8b623 upstream. We unfortunately can't use ~0UL for the scan mask to indicate that the only valid scan mask is all channels selected. The IIO core needs the exact mask to work correctly and not a super-set of it. So calculate the masked based on the channels that are available for a particular device. Signed-off-by:
Paul Cercueil <paul.cercueil@analog.com> Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Fixes: 5eda3550 ("staging:iio:adis16400: Preallocate transfer message") Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Paul Cercueil authored
commit 7323d598 upstream. Previously, the two voltage channels had the same ID, which didn't cause conflicts in sysfs only because one channel is named and the other isn't; this is still violating the spec though, two indexed channels should never have the same index. Signed-off-by:
-
Lars-Peter Clausen authored
commit 69ca2d77 upstream. Add the scale for the pressure channel, which is currently missing. Signed-off-by:
-
Axel Lin authored
commit e5d73218 upstream. Remove extra space between platform prefix and DRIVER_NAME in MODULE_ALIAS. Signed-off-by:
Axel Lin <axel.lin@ingics.com> Signed-off-by:
-
Nikolay Aleksandrov authored
[ Upstream commit c4c832f8 ] br_fdb_update() can be called in process context in the following way: br_fdb_add() -> __br_fdb_add() -> br_fdb_update() (if NTF_USE flag is set) so we need to disable softirqs because there are softirq users of the hash_lock. One easy way to reproduce this is to modify the bridge utility to set NTF_USE, enable stp and then set maxageing to a low value so br_fdb_cleanup() is called frequently and then just add new entries in a loop. This happens because br_fdb_cleanup() is called from timer/softirq context. The spin locks in br_fdb_update were _bh before commit f8ae737d ("[BRIDGE]: forwarding remove unneeded preempt and bh diasables") and at the time that commit was correct because br_fdb_update() couldn't be called from process context, but that changed after commit: 292d1398 ("bridge: add NTF_USE support") Using local_bh_disable/enable around br_fdb_update() allows us to keep using the spin_lock/unlock in br_fdb_update for the fast-path. Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Fixes: 292d1398 ("bridge: add NTF_USE support") Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Shawn Bohrer authored
[ Upstream commit 6e540309 ] 421b3885 "udp: ipv4: Add udp early demux" introduced a regression that allowed sockets bound to INADDR_ANY to receive packets from multicast groups that the socket had not joined. For example a socket that had joined 224.168.2.9 could also receive packets from 225.168.2.9 despite not having joined that group if ip_early_demux is enabled. Fix this by calling ip_check_mc_rcu() in udp_v4_early_demux() to verify that the multicast packet is indeed ours. Signed-off-by:
Shawn Bohrer <sbohrer@rgmadvisors.com> Reported-by:
Yurij M. Plotnikov <Yurij.Plotnikov@oktetlabs.ru> Signed-off-by:
-
Ian Campbell authored
[ Upstream commit 31a41898 ] When we come to tear things down in netback_remove() and generate the uevent it is possible that the xenstore directory has already been removed (details below). In such cases netback_uevent() won't be able to read the hotplug script and will write a xenstore error node. A recent change to the hypervisor exposed this race such that we now sometimes lose it (where apparently we didn't ever before). Instead read the hotplug script configuration during setup and use it for the lifetime of the backend device. The apparently more obvious fix of moving the transition to state=Closed in netback_remove() to after the uevent does not work because it is possible that we are already in state=Closed (in reaction to the guest having disconnected as it shutdown). Being already in Closed means the toolstack is at liberty to start tearing down the xenstore directories. In principal it might be possible to arrange to unregister the device sooner (e.g on transition to Closing) such that xenstore would still be there but this state machine is fragile and prone to anger... A modern Xen system only relies on the hotplug uevent for driver domains, when the backend is in the same domain as the toolstack it will run the necessary setup/teardown directly in the correct sequence wrt xenstore changes. Signed-off-by:
Ian Campbell <ian.campbell@citrix.com> Acked-by:
Wei Liu <wei.liu2@citrix.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit beb39db5 ] We have two problems in UDP stack related to bogus checksums : 1) We return -EAGAIN to application even if receive queue is not empty. This breaks applications using edge trigger epoll() 2) Under UDP flood, we can loop forever without yielding to other processes, potentially hanging the host, especially on non SMP. This patch is an attempt to make things better. We might in the future add extra support for rt applications wanting to better control time spent doing a recv() in a hostile environment. For example we could validate checksums before queuing packets in socket receive queue. Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by:
-
WANG Cong authored
[ Upstream commit 86e363dc ] For mq qdisc, we add per tx queue qdisc to root qdisc for display purpose, however, that happens too early, before the new dev->qdisc is finally set, this causes q->list points to an old root qdisc which is going to be freed right before assigning with a new one. Fix this by moving ->attach() after setting dev->qdisc. For the record, this fixes the following crash: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 975 at lib/list_debug.c:59 __list_del_entry+0x5a/0x98() list_del corruption. prev->next should be ffff8800d1998ae8, but was 6b6b6b6b6b6b6b6b CPU: 1 PID: 975 Comm: tc Not tainted 4.1.0-rc4+ #1019 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 0000000000000009 ffff8800d73fb928 ffffffff81a44e7f 0000000047574756 ffff8800d73fb978 ffff8800d73fb968 ffffffff810790da ffff8800cfc4cd20 ffffffff814e725b ffff8800d1998ae8 ffffffff82381250 0000000000000000 Call Trace: [<ffffffff81a44e7f>] dump_stack+0x4c/0x65 [<ffffffff810790da>] warn_slowpath_common+0x9c/0xb6 [<ffffffff814e725b>] ? __list_del_entry+0x5a/0x98 [<ffffffff81079162>] warn_slowpath_fmt+0x46/0x48 [<ffffffff81820eb0>] ? dev_graft_qdisc+0x5e/0x6a [<ffffffff814e725b>] __list_del_entry+0x5a/0x98 [<ffffffff814e72a7>] list_del+0xe/0x2d [<ffffffff81822f05>] qdisc_list_del+0x1e/0x20 [<ffffffff81820cd1>] qdisc_destroy+0x30/0xd6 [<ffffffff81822676>] qdisc_graft+0x11d/0x243 [<ffffffff818233c1>] tc_get_qdisc+0x1a6/0x1d4 [<ffffffff810b5eaf>] ? mark_lock+0x2e/0x226 [<ffffffff817ff8f5>] rtnetlink_rcv_msg+0x181/0x194 [<ffffffff817ff72e>] ? rtnl_lock+0x17/0x19 [<ffffffff817ff72e>] ? rtnl_lock+0x17/0x19 [<ffffffff817ff774>] ? __rtnl_unlock+0x17/0x17 [<ffffffff81855dc6>] netlink_rcv_skb+0x4d/0x93 [<ffffffff817ff756>] rtnetlink_rcv+0x26/0x2d [<ffffffff818544b2>] netlink_unicast+0xcb/0x150 [<ffffffff81161db9>] ? might_fault+0x59/0xa9 [<ffffffff81854f78>] netlink_sendmsg+0x4fa/0x51c [<ffffffff817d6e09>] sock_sendmsg_nosec+0x12/0x1d [<ffffffff817d8967>] sock_sendmsg+0x29/0x2e [<ffffffff817d8cf3>] ___sys_sendmsg+0x1b4/0x23a [<ffffffff8100a1b8>] ? native_sched_clock+0x35/0x37 [<ffffffff810a1d83>] ? sched_clock_local+0x12/0x72 [<ffffffff810a1fd4>] ? sched_clock_cpu+0x9e/0xb7 [<ffffffff810def2a>] ? current_kernel_time+0xe/0x32 [<ffffffff810b4bc5>] ? lock_release_holdtime.part.29+0x71/0x7f [<ffffffff810ddebf>] ? read_seqcount_begin.constprop.27+0x5f/0x76 [<ffffffff810b6292>] ? trace_hardirqs_on_caller+0x17d/0x199 [<ffffffff811b14d5>] ? __fget_light+0x50/0x78 [<ffffffff817d9808>] __sys_sendmsg+0x42/0x60 [<ffffffff817d9838>] SyS_sendmsg+0x12/0x1c [<ffffffff81a50e97>] system_call_fastpath+0x12/0x6f ---[ end trace ef29d3fb28e97ae7 ]--- For long term, we probably need to clean up the qdisc_graft() code in case it hides other bugs like this. Fixes: 95dc1929 ("pkt_sched: give visibility to mq slave qdiscs") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
-
Mark Salyzyn authored
[ Upstream commit b48732e4 ] got a rare NULL pointer dereference in clear_bit Signed-off-by:
Mark Salyzyn <salyzyn@android.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> ---- v2: switch to sock_flag(sk, SOCK_DEAD) and added net/caif/caif_socket.c v3: return -ECONNRESET in upstream caller of wait function for SOCK_DEAD Signed-off-by:
-
Richard Cochran authored
[ Upstream commit a935865c ] Callers of the ext_write function are supposed to hold a mutex that protects the state of the dialed page, but one caller was missing the lock from the very start, and over time the code has been changed without following the rule. This patch cleans up the call sites in violation of the rule. Signed-off-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Richard Cochran authored
[ Upstream commit 397a253a ] Currently, the calibration function that corrects the initial offsets among multiple devices only works the first time. If the function is called more than once, the calibration fails and bogus offsets will be programmed into the devices. In a well hidden spot, the device documentation tells that trigger indexes 0 and 1 are special in allowing the TRIG_IF_LATE flag to actually work. This patch fixes the issue by using one of the special triggers during the recalibration method. Signed-off-by:
-
Thadeu Lima de Souza Cascardo authored
[ Upstream commit 47cc84ce ] When more than a multicast address is present in a MLDv2 report, all but the first address is ignored, because the code breaks out of the loop if there has not been an error adding that address. This has caused failures when two guests connected through the bridge tried to communicate using IPv6. Neighbor discoveries would not be transmitted to the other guest when both used a link-local address and a static address. This only happens when there is a MLDv2 querier in the network. The fix will only break out of the loop when there is a failure adding a multicast address. The mdb before the patch: dev ovirtmgmt port vnet0 grp ff02::1:ff7d:6603 temp dev ovirtmgmt port vnet1 grp ff02::1:ff7d:6604 temp dev ovirtmgmt port bond0.86 grp ff02::2 temp After the patch: dev ovirtmgmt port vnet0 grp ff02::1:ff7d:6603 temp dev ovirtmgmt port vnet1 grp ff02::1:ff7d:6604 temp dev ovirtmgmt port bond0.86 grp ff02::fb temp dev ovirtmgmt port bond0.86 grp ff02::2 temp dev ovirtmgmt port bond0.86 grp ff02::d temp dev ovirtmgmt port vnet0 grp ff02::1:ff00:76 temp dev ovirtmgmt port bond0.86 grp ff02::16 temp dev ovirtmgmt port vnet1 grp ff02::1:ff00:77 temp dev ovirtmgmt port bond0.86 grp ff02::1:ff00:def temp dev ovirtmgmt port bond0.86 grp ff02::1:ffa1:40bf temp Fixes: 08b202b6 ("bridge br_multicast: IPv6 MLD support.") Reported-by:
Rik Theys <Rik.Theys@esat.kuleuven.be> Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@redhat.com> Tested-by:
-
Eric W. Biederman authored
[ Upstream commit 381c759d ] ip_error does not check if in_dev is NULL before dereferencing it. IThe following sequence of calls is possible: CPU A CPU B ip_rcv_finish ip_route_input_noref() ip_route_input_slow() inetdev_destroy() dst_input() With the result that a network device can be destroyed while processing an input packet. A crash was triggered with only unicast packets in flight, and forwarding enabled on the only network device. The error condition was created by the removal of the network device. As such it is likely the that error code was -EHOSTUNREACH, and the action taken by ip_error (if in_dev had been accessible) would have been to not increment any counters and to have tried and likely failed to send an icmp error as the network device is going away. Therefore handle this weird case by just dropping the packet if !in_dev. It will result in dropping the packet sooner, and will not result in an actual change of behavior. Fixes: 251da413 ("ipv4: Cache ip_error() routes even when not forwarding.") Reported-by:
Vittorio Gambaletta <linuxbugs@vittgam.net> Tested-by:
"Eric W. Biederman" <ebiederm@xmission.com> Acked-by:
-
Florent Fourcot authored
[ Upstream commit 21858cd0 ] commit 1d13a96c ("ipv6: tcp: fix flowlabel value in ACK messages send from TIME_WAIT") added the flow label in the last TCP packets. Unfortunately, it was not casted properly. This patch replace the buggy shift with be32_to_cpu/cpu_to_be32. Fixes: 1d13a96c ("ipv6: tcp: fix flowlabel value in ACK messages") Reported-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Florent Fourcot <florent.fourcot@enst-bretagne.fr> Acked-by:
-
Florian Fainelli authored
[ Upstream commit 7e140696 ] RGMII interfaces come in multiple flavors: RGMII with transmit or receive internal delay, no delays at all, or delays in both direction. This change extends the initial check for PHY_INTERFACE_MODE_RGMII to cover all of these variants since EEE should be allowed for any of these modes, since it is a property of the RGMII, hence Gigabit PHY capability more than the RGMII electrical interface and its delays. Fixes: a59a4d19 ("phy: add the EEE support and the way to access to the MMD registers") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Alexei Starovoitov authored
[ Upstream commit 3f7352bf ] x86 has variable length encoding. x86 JIT compiler is trying to pick the shortest encoding for given bpf instruction. While doing so the jump targets are changing, so JIT is doing multiple passes over the program. Typical program needs 3 passes. Some very short programs converge with 2 passes. Large programs may need 4 or 5. But specially crafted bpf programs may hit the pass limit and if the program converges on the last iteration the JIT compiler will be producing an image full of 'int 3' insns. Fix this corner case by doing final iteration over bpf program. Fixes: 0a14842f ("net: filter: Just In Time compiler for x86-64") Reported-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
Alexei Starovoitov <ast@plumgrid.com> Tested-by:
-
Vlad Yasevich authored
[ Upstream commit d66bf7dd ] The code in __netdev_upper_dev_link() has an over-stringent loop detection logic that actually prevents valid configurations from working correctly. In particular, the logic returns an error if an upper device is already in the list of all upper devices for a given dev. This particular check seems to be a overzealous as it disallows perfectly valid configurations. For example: # ip l a link eth0 name eth0.10 type vlan id 10 # ip l a dev br0 typ bridge # ip l s eth0.10 master br0 # ip l s eth0 master br0 <--- Will fail If you switch the last two commands (add eth0 first), then both will succeed. If after that, you remove eth0 and try to re-add it, it will fail! It appears to be enough to simply check adj_list to keeps things safe. I've tried stacking multiple devices multiple times in all different combinations, and either rx_handler registration prevented the stacking of the device linking cought the error. Signed-off-by:
Vladislav Yasevich <vyasevic@redhat.com> Acked-by:
Jiri Pirko <jiri@resnulli.us> Acked-by:
Veaceslav Falico <vfalico@gmail.com> Signed-off-by:
-
Ilya Dryomov authored
commit 45002267 upstream. Crush temporary buffers are allocated as per replica size configured by the user. When there are more final osds (to be selected as per rule) than the replicas, buffer overlaps and it causes crash. Now, it ensures that at most num-rep osds are selected even if more number of osds are allowed by the rule. Reflects ceph.git commits 6b4d1aa99718e3b367496326c1e64551330fabc0, 234b066ba04976783d15ff2abc3e81b6cc06fb10. Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
- 06 Jun, 2015 14 commits
-
-
Greg Kroah-Hartman authored
-
Andrew Morton authored
commit 2b1d3ae9 upstream. load_elf_binary() returns `retval', not `error'. Fixes: a87938b2 ("fs/binfmt_elf.c: fix bug in loading of PIE binaries") Reported-by:
James Hogan <james.hogan@imgtec.com> Cc: Michael Davidson <md@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Sasha Levin authored
commit 161f873b upstream. We used to read file_handle twice. Once to get the amount of extra bytes, and once to fetch the entire structure. This may be problematic since we do size verifications only after the first read, so if the number of extra bytes changes in userspace between the first and second calls, we'll have an incoherent view of file_handle. Instead, read the constant size once, and copy that over to the final structure without having to re-read it again. Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Christian König authored
commit 7c0411d2 upstream. We have that bug for years and some users report side effects when fixing it on older hardware. So revert it for VM_CONTEXT0_PAGE_TABLE_END_ADDR, but keep it for VM 1-15. Signed-off-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Christian König authored
commit 607d4806 upstream. The mapping range is inclusive between starting and ending addresses. Signed-off-by:
-
Alex Deucher authored
commit fcf3b542 upstream. Signed-off-by:
-
Rafael J. Wysocki authored
commit b9a5e5e1 upstream. Since acpi_reserve_resources() is defined as a device_initcall(), there's no guarantee that it will be executed in the right order with respect to the rest of the ACPI initialization code. On some systems this leads to breakage if, for example, the address range that should be reserved for the ACPI fixed registers is given to the PCI host bridge instead if the race is won by the wrong code path. Fix this by turning acpi_reserve_resources() into a void function and calling it directly from within the ACPI initialization sequence. Reported-and-tested-by:
George McCollister <george.mccollister@gmail.com> Link: http://marc.info/?t=143092384600002&r=1&w=2Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Mark Hounschell authored
commit 74856fbf upstream. 256 bytes per sector support has been broken since 2.6.X, and no-one stepped up to fix this. So disable support for it. Signed-off-by:
Mark Hounschell <dmarkh@cfl.rr.com> Signed-off-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
James Bottomley <JBottomley@Odin.com> Signed-off-by:
-
K. Y. Srinivasan authored
commit dc45708c upstream. Set the SRB flags correctly when there is no data transfer. Without this change some IHV drivers will fail valid commands such as TEST_UNIT_READY. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Reviewed-by:
Long Li <longli@microsoft.com> Signed-off-by:
-
Benjamin Tissoires authored
commit 3c0213d1 upstream. When the v3 hardware sees more than one finger, it uses the semi-mt protocol to report the touches. However, it currently works when num_fingers is 0, 1 or 2, but when it is 3 and above, it sends only 1 finger as if num_fingers was 1. This confuses userspace which knows how to deal with extra fingers when all the slots are used, but not when some are missing. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=90101Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
-
Larry Finger authored
commit 414b7e3b upstream. The USB mini-driver in rtlwifi, which is used by rtl8192cu, issues a call to usb_control_msg() with a timeout value of 0. In some instances where the interface is shutting down, this infinite wait results in a CPU deadlock. A one second timeout fixes this problem without affecting any normal operations. This bug is reported at https://bugzilla.novell.com/show_bug.cgi?id=927786. Reported-by:
Bernhard Wiedemann <bwiedemann@suse.com> Tested-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Bernhard Wiedemann <bwiedemann@suse.com> Cc: Takashi Iwai<tiwai@suse.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Eric Work authored
commit a8115776 upstream. The variable "sector" in "raid0_make_request()" was improperly updated by a call to "sector_div()" which modifies its first argument in place. Commit 47d68979 restored this variable after the call for later re-use. Unfortunetly the restore was done after the referenced variable "bio" was advanced. This lead to the original value and the restored value being different. Here we move this line to the proper place. One observed side effect of this bug was discarding a file though unlinking would cause an unrelated file's contents to be discarded. Signed-off-by:
-
NeilBrown authored
commit 6e9eac2d upstream. If any memory allocation in resize_stripes fails we will return -ENOMEM, but in some cases we update conf->pool_size anyway. This means that if we try again, the allocations will be assumed to be larger than they are, and badness results. So only update pool_size if there is no error. This bug was introduced in 2.6.17 and the patch is suitable for -stable. Fixes: ad01c9e3 ("[PATCH] md: Allow stripes to be expanded in preparation for expanding an array") Signed-off-by:
-
Jean Delvare authored
Commit 178c2490 ("thermal: step_wise: cdev only needs update on a new target state") broke driver acerhdf. That driver abused the step_wise thermal governor until the bang_bang governor was available, and the optimization broke this usage model. Kernels v3.12 to v3.18 are affected. In v3.19 the acerhdf driver was switched to the bang_bang governor and that solved the problem. For kernels v3.12 to v3.17, the bang_bang governor isn't available yet so the easiest fix is to revert the optimization. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Reported-by: Dieter Jurzitza (https://bugzilla.opensuse.org/show_bug.cgi?id=925961) Tested-by:
Peter Feuerer <peter@piie.net> Tested-by: Dieter Jurzitza
-
