- 04 Sep, 2023 4 commits
-
-
Kalle Valo authored
Jes' tree hasn't been used for six years so remove it. Signed-off-by:
Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230828123603.87621-3-kvalo@kernel.org
-
Kalle Valo authored
Linville's tree hasn't been used for something like 10 years so remove it. Signed-off-by:
-
Kalle Valo authored
The top level entry for wireless drivers already contains to the wiki so no need to duplicate that in driver entries: NETWORKING DRIVERS (WIRELESS) [...] W: https://wireless.wiki.kernel.org/Signed-off-by:
-
Lorenzo Bianconi authored
Fix the following kernel depency lock holding wed_lock with BH disabled. [ 40.579696] mt798x-wmac 18000000.wifi: attaching wed device 0 version 2 [ 40.604648] platform 15010000.wed: MTK WED WO Firmware Version: DEV_000000, Build Time: 20221208202138 [ 40.613972] platform 15010000.wed: MTK WED WO Chip ID 00 Region 3 [ 40.943617] [ 40.945118] ======================================================== [ 40.951457] WARNING: possible irq lock inversion dependency detected [ 40.957797] 5.15.127 #0 Not tainted [ 40.961276] -------------------------------------------------------- [ 40.967614] insmod/2329 just changed the state of lock: [ 40.972827] ffffff8004003b08 (&dev->wed_lock){+.+.}-{2:2}, at: mt76_get_rxwi+0x1c/0xac [mt76] [ 40.981387] but this lock was taken by another, SOFTIRQ-safe lock in the past: [ 40.988592] (&q->lock){+.-.}-{2:2} [ 40.988602] [ 40.988602] [ 40.988602] and interrupts could create inverse lock ordering between them. [ 40.988602] [ 41.003445] [ 41.003445] other info that might help us debug this: [ 41.009957] Possible interrupt unsafe locking scenario: [ 41.009957] [ 41.016729] CPU0 CPU1 [ 41.021245] ---- ---- [ 41.025761] lock(&dev->wed_lock); [ 41.029241] local_irq_disable(); [ 41.035145] lock(&q->lock); [ 41.040620] lock(&dev->wed_lock); [ 41.046616] <Interrupt> [ 41.049223] lock(&q->lock); [ 41.052356] [ 41.052356] *** DEADLOCK *** [ 41.052356] [ 41.058260] 1 lock held by insmod/2329: [ 41.062085] #0: ffffff80003b9988 (&dev->mutex){....}-{3:3}, at: __driver_attach+0x88/0x190 [ 41.070442] [ 41.070442] the shortest dependencies between 2nd lock and 1st lock: [ 41.078257] -> (&q->lock){+.-.}-{2:2} { [ 41.082177] HARDIRQ-ON-W at: [ 41.085396] lock_acquire+0xfc/0x2c0 [ 41.090787] _raw_spin_lock_bh+0x84/0xa0 [ 41.096525] mt76_dma_cleanup+0x24c/0x650 [mt76] [ 41.102977] mt76_dma_cleanup+0x614/0x650 [mt76] [ 41.109428] mt7915_eeprom_get_power_delta+0x1168/0x2464 [mt7915e] [ 41.117435] mt7915_eeprom_init+0x40/0x340 [mt7915e] [ 41.124222] cleanup_module+0x94/0xb28 [mt7915e] [ 41.130662] platform_probe+0x64/0xbc [ 41.136139] really_probe.part.0+0x98/0x2f4 [ 41.142134] __driver_probe_device+0x94/0x16c [ 41.148303] driver_probe_device+0x40/0x120 [ 41.154299] __driver_attach+0x94/0x190 [ 41.159947] bus_for_each_dev+0x5c/0x94 [ 41.165594] driver_attach+0x20/0x30 [ 41.170983] bus_add_driver+0x104/0x1f4 [ 41.176631] driver_register+0x74/0x120 [ 41.182280] __platform_driver_register+0x24/0x30 [ 41.188797] 0xffffffc000cb1074 [ 41.193754] do_one_initcall+0x70/0x2cc [ 41.199403] do_init_module+0x44/0x240 [ 41.204968] load_module+0x1f5c/0x2874 [ 41.210532] __do_sys_init_module+0x1d8/0x2ac [ 41.216702] __arm64_sys_init_module+0x18/0x20 [ 41.222958] invoke_syscall.constprop.0+0x4c/0xe0 [ 41.229474] do_el0_svc+0x50/0xf0 [ 41.234602] el0_svc+0x4c/0xcc [ 41.239471] el0t_64_sync_handler+0xe0/0x110 [ 41.245556] el0t_64_sync+0x15c/0x160 [ 41.251029] IN-SOFTIRQ-W at: [ 41.254249] lock_acquire+0xfc/0x2c0 [ 41.259638] _raw_spin_lock_bh+0x84/0xa0 [ 41.265372] mt76_queue_tx_complete+0x34/0x70 [mt76] [ 41.272170] mt76_free_pending_rxwi+0x36c/0x5d0 [mt76] [ 41.279140] mt76_free_pending_rxwi+0x5c0/0x5d0 [mt76] [ 41.286111] mt7915_eeprom_get_power_delta+0x620/0x2464 [mt7915e] [ 41.294026] __napi_poll.constprop.0+0x5c/0x230 [ 41.300372] net_rx_action+0xe4/0x294 [ 41.305847] _stext+0x154/0x4cc [ 41.310801] do_softirq+0xa4/0xbc [ 41.315930] __local_bh_enable_ip+0x168/0x174 [ 41.322097] napi_threaded_poll+0xbc/0x140 [ 41.328007] kthread+0x13c/0x150 [ 41.333049] ret_from_fork+0x10/0x20 [ 41.338437] INITIAL USE at: [ 41.341568] lock_acquire+0xfc/0x2c0 [ 41.346869] _raw_spin_lock_bh+0x84/0xa0 [ 41.352519] mt76_dma_cleanup+0x24c/0x650 [mt76] [ 41.358882] mt76_dma_cleanup+0x614/0x650 [mt76] [ 41.365245] mt7915_eeprom_get_power_delta+0x1168/0x2464 [mt7915e] [ 41.373160] mt7915_eeprom_init+0x40/0x340 [mt7915e] [ 41.379860] cleanup_module+0x94/0xb28 [mt7915e] [ 41.386213] platform_probe+0x64/0xbc [ 41.391602] really_probe.part.0+0x98/0x2f4 [ 41.397511] __driver_probe_device+0x94/0x16c [ 41.403594] driver_probe_device+0x40/0x120 [ 41.409502] __driver_attach+0x94/0x190 [ 41.415063] bus_for_each_dev+0x5c/0x94 [ 41.420625] driver_attach+0x20/0x30 [ 41.425926] bus_add_driver+0x104/0x1f4 [ 41.431487] driver_register+0x74/0x120 [ 41.437049] __platform_driver_register+0x24/0x30 [ 41.443479] 0xffffffc000cb1074 [ 41.448346] do_one_initcall+0x70/0x2cc [ 41.453907] do_init_module+0x44/0x240 [ 41.459383] load_module+0x1f5c/0x2874 [ 41.464860] __do_sys_init_module+0x1d8/0x2ac [ 41.470944] __arm64_sys_init_module+0x18/0x20 [ 41.477113] invoke_syscall.constprop.0+0x4c/0xe0 [ 41.483542] do_el0_svc+0x50/0xf0 [ 41.488582] el0_svc+0x4c/0xcc [ 41.493364] el0t_64_sync_handler+0xe0/0x110 [ 41.499361] el0t_64_sync+0x15c/0x160 [ 41.504748] } [ 41.506489] ... key at: [<ffffffc000c65ba0>] __this_module+0x3e0/0xffffffffffffa840 [mt76] [ 41.515371] ... acquired at: [ 41.518413] _raw_spin_lock+0x60/0x74 [ 41.522240] mt76_get_rxwi+0x1c/0xac [mt76] [ 41.526608] mt76_dma_cleanup+0x3e0/0x650 [mt76] [ 41.531410] mt76_dma_cleanup+0x614/0x650 [mt76] [ 41.536211] mt7915_dma_init+0x408/0x7b0 [mt7915e] [ 41.541177] mt7915_register_device+0x310/0x620 [mt7915e] [ 41.546749] mt7915_mmio_probe+0xcec/0x1d44 [mt7915e] [ 41.551973] platform_probe+0x64/0xbc [ 41.555802] really_probe.part.0+0x98/0x2f4 [ 41.560149] __driver_probe_device+0x94/0x16c [ 41.564670] driver_probe_device+0x40/0x120 [ 41.569017] __driver_attach+0x94/0x190 [ 41.573019] bus_for_each_dev+0x5c/0x94 [ 41.577018] driver_attach+0x20/0x30 [ 41.580758] bus_add_driver+0x104/0x1f4 [ 41.584758] driver_register+0x74/0x120 [ 41.588759] __platform_driver_register+0x24/0x30 [ 41.593628] init_module+0x74/0x1000 [mt7915e] [ 41.598248] do_one_initcall+0x70/0x2cc [ 41.602248] do_init_module+0x44/0x240 [ 41.606162] load_module+0x1f5c/0x2874 [ 41.610078] __do_sys_init_module+0x1d8/0x2ac [ 41.614600] __arm64_sys_init_module+0x18/0x20 [ 41.619209] invoke_syscall.constprop.0+0x4c/0xe0 [ 41.624076] do_el0_svc+0x50/0xf0 [ 41.627555] el0_svc+0x4c/0xcc [ 41.630776] el0t_64_sync_handler+0xe0/0x110 [ 41.635211] el0t_64_sync+0x15c/0x160 [ 41.639037] [ 41.640517] -> (&dev->wed_lock){+.+.}-{2:2} { [ 41.644872] HARDIRQ-ON-W at: [ 41.648003] lock_acquire+0xfc/0x2c0 [ 41.653219] _raw_spin_lock+0x60/0x74 [ 41.658520] mt76_free_pending_rxwi+0xc0/0x5d0 [mt76] [ 41.665232] mt76_dma_cleanup+0x1dc/0x650 [mt76] [ 41.671508] mt7915_eeprom_get_power_delta+0x1830/0x2464 [mt7915e] [ 41.679336] mt7915_unregister_device+0x5b4/0x910 [mt7915e] [ 41.686555] mt7915_eeprom_get_target_power+0xb8/0x230 [mt7915e] [ 41.694209] mt7986_wmac_enable+0xc30/0xcd0 [mt7915e] [ 41.700909] platform_remove+0x4c/0x64 [ 41.706298] __device_release_driver+0x194/0x240 [ 41.712554] driver_detach+0xc0/0x100 [ 41.717857] bus_remove_driver+0x54/0xac [ 41.723418] driver_unregister+0x2c/0x54 [ 41.728980] platform_driver_unregister+0x10/0x20 [ 41.735323] mt7915_ops+0x244/0xffffffffffffed58 [mt7915e] [ 41.742457] __arm64_sys_delete_module+0x170/0x23c [ 41.748887] invoke_syscall.constprop.0+0x4c/0xe0 [ 41.755229] do_el0_svc+0x50/0xf0 [ 41.760183] el0_svc+0x4c/0xcc [ 41.764878] el0t_64_sync_handler+0xe0/0x110 [ 41.770788] el0t_64_sync+0x15c/0x160 [ 41.776088] SOFTIRQ-ON-W at: [ 41.779220] lock_acquire+0xfc/0x2c0 [ 41.784435] _raw_spin_lock+0x60/0x74 [ 41.789737] mt76_get_rxwi+0x1c/0xac [mt76] [ 41.795580] mt7915_debugfs_rx_log+0x804/0xb74 [mt7915e] [ 41.802540] mtk_wed_start+0x970/0xaa0 [ 41.807929] mt7915_dma_start+0x26c/0x630 [mt7915e] [ 41.814455] mt7915_dma_start+0x5a4/0x630 [mt7915e] [ 41.820981] mt7915_dma_init+0x45c/0x7b0 [mt7915e] [ 41.827420] mt7915_register_device+0x310/0x620 [mt7915e] [ 41.834467] mt7915_mmio_probe+0xcec/0x1d44 [mt7915e] [ 41.841167] platform_probe+0x64/0xbc [ 41.846469] really_probe.part.0+0x98/0x2f4 [ 41.852291] __driver_probe_device+0x94/0x16c [ 41.858286] driver_probe_device+0x40/0x120 [ 41.864107] __driver_attach+0x94/0x190 [ 41.869582] bus_for_each_dev+0x5c/0x94 [ 41.875056] driver_attach+0x20/0x30 [ 41.880270] bus_add_driver+0x104/0x1f4 [ 41.885745] driver_register+0x74/0x120 [ 41.891221] __platform_driver_register+0x24/0x30 [ 41.897564] init_module+0x74/0x1000 [mt7915e] [ 41.903657] do_one_initcall+0x70/0x2cc [ 41.909130] do_init_module+0x44/0x240 [ 41.914520] load_module+0x1f5c/0x2874 [ 41.919909] __do_sys_init_module+0x1d8/0x2ac [ 41.925905] __arm64_sys_init_module+0x18/0x20 [ 41.931989] invoke_syscall.constprop.0+0x4c/0xe0 [ 41.938331] do_el0_svc+0x50/0xf0 [ 41.943285] el0_svc+0x4c/0xcc [ 41.947981] el0t_64_sync_handler+0xe0/0x110 [ 41.953892] el0t_64_sync+0x15c/0x160 [ 41.959192] INITIAL USE at: [ 41.962238] lock_acquire+0xfc/0x2c0 [ 41.967365] _raw_spin_lock+0x60/0x74 [ 41.972580] mt76_free_pending_rxwi+0xc0/0x5d0 [mt76] [ 41.979206] mt76_dma_cleanup+0x1dc/0x650 [mt76] [ 41.985395] mt7915_eeprom_get_power_delta+0x1830/0x2464 [mt7915e] [ 41.993137] mt7915_unregister_device+0x5b4/0x910 [mt7915e] [ 42.000270] mt7915_eeprom_get_target_power+0xb8/0x230 [mt7915e] [ 42.007837] mt7986_wmac_enable+0xc30/0xcd0 [mt7915e] [ 42.014450] platform_remove+0x4c/0x64 [ 42.019753] __device_release_driver+0x194/0x240 [ 42.025922] driver_detach+0xc0/0x100 [ 42.031137] bus_remove_driver+0x54/0xac [ 42.036612] driver_unregister+0x2c/0x54 [ 42.042087] platform_driver_unregister+0x10/0x20 [ 42.048344] mt7915_ops+0x244/0xffffffffffffed58 [mt7915e] [ 42.055391] __arm64_sys_delete_module+0x170/0x23c [ 42.061735] invoke_syscall.constprop.0+0x4c/0xe0 [ 42.067990] do_el0_svc+0x50/0xf0 [ 42.072857] el0_svc+0x4c/0xcc [ 42.077466] el0t_64_sync_handler+0xe0/0x110 [ 42.083289] el0t_64_sync+0x15c/0x160 [ 42.088503] } [ 42.090157] ... key at: [<ffffffc000c65c10>] __this_module+0x450/0xffffffffffffa840 [mt76] [ 42.098951] ... acquired at: [ 42.101907] __lock_acquire+0x718/0x1df0 [ 42.105994] lock_acquire+0xfc/0x2c0 [ 42.109734] _raw_spin_lock+0x60/0x74 [ 42.113561] mt76_get_rxwi+0x1c/0xac [mt76] [ 42.117929] mt7915_debugfs_rx_log+0x804/0xb74 [mt7915e] [ 42.123415] mtk_wed_start+0x970/0xaa0 [ 42.127328] mt7915_dma_start+0x26c/0x630 [mt7915e] [ 42.132379] mt7915_dma_start+0x5a4/0x630 [mt7915e] [ 42.137430] mt7915_dma_init+0x45c/0x7b0 [mt7915e] [ 42.142395] mt7915_register_device+0x310/0x620 [mt7915e] [ 42.147967] mt7915_mmio_probe+0xcec/0x1d44 [mt7915e] [ 42.153192] platform_probe+0x64/0xbc [ 42.157019] really_probe.part.0+0x98/0x2f4 [ 42.161367] __driver_probe_device+0x94/0x16c [ 42.165887] driver_probe_device+0x40/0x120 [ 42.170234] __driver_attach+0x94/0x190 [ 42.174235] bus_for_each_dev+0x5c/0x94 [ 42.178235] driver_attach+0x20/0x30 [ 42.181974] bus_add_driver+0x104/0x1f4 [ 42.185974] driver_register+0x74/0x120 [ 42.189974] __platform_driver_register+0x24/0x30 [ 42.194842] init_module+0x74/0x1000 [mt7915e] [ 42.199460] do_one_initcall+0x70/0x2cc [ 42.203460] do_init_module+0x44/0x240 [ 42.207376] load_module+0x1f5c/0x2874 [ 42.211290] __do_sys_init_module+0x1d8/0x2ac [ 42.215813] __arm64_sys_init_module+0x18/0x20 [ 42.220421] invoke_syscall.constprop.0+0x4c/0xe0 [ 42.225288] do_el0_svc+0x50/0xf0 [ 42.228768] el0_svc+0x4c/0xcc [ 42.231989] el0t_64_sync_handler+0xe0/0x110 [ 42.236424] el0t_64_sync+0x15c/0x160 [ 42.240249] [ 42.241730] [ 42.241730] stack backtrace: [ 42.246074] CPU: 1 PID: 2329 Comm: insmod Not tainted 5.15.127 #0 [ 42.252157] Hardware name: GainStrong Oolite-MT7981B V1 Dev Board (NAND boot) (DT) [ 42.259712] Call trace: [ 42.262147] dump_backtrace+0x0/0x174 [ 42.265802] show_stack+0x14/0x20 [ 42.269108] dump_stack_lvl+0x84/0xac [ 42.272761] dump_stack+0x14/0x2c [ 42.276066] print_irq_inversion_bug.part.0+0x1b0/0x1c4 [ 42.281285] mark_lock+0x8b8/0x8bc [ 42.284678] __lock_acquire+0x718/0x1df0 [ 42.288592] lock_acquire+0xfc/0x2c0 [ 42.292158] _raw_spin_lock+0x60/0x74 [ 42.295811] mt76_get_rxwi+0x1c/0xac [mt76] [ 42.300008] mt7915_debugfs_rx_log+0x804/0xb74 [mt7915e] [ 42.305320] mtk_wed_start+0x970/0xaa0 [ 42.309059] mt7915_dma_start+0x26c/0x630 [mt7915e] [ 42.313937] mt7915_dma_start+0x5a4/0x630 [mt7915e] [ 42.318815] mt7915_dma_init+0x45c/0x7b0 [mt7915e] [ 42.323606] mt7915_register_device+0x310/0x620 [mt7915e] [ 42.329005] mt7915_mmio_probe+0xcec/0x1d44 [mt7915e] [ 42.334056] platform_probe+0x64/0xbc [ 42.337711] really_probe.part.0+0x98/0x2f4 [ 42.341885] __driver_probe_device+0x94/0x16c [ 42.346232] driver_probe_device+0x40/0x120 [ 42.350407] __driver_attach+0x94/0x190 [ 42.354234] bus_for_each_dev+0x5c/0x94 [ 42.358061] driver_attach+0x20/0x30 [ 42.361627] bus_add_driver+0x104/0x1f4 [ 42.365454] driver_register+0x74/0x120 [ 42.369282] __platform_driver_register+0x24/0x30 [ 42.373977] init_module+0x74/0x1000 [mt7915e] [ 42.378423] do_one_initcall+0x70/0x2cc [ 42.382249] do_init_module+0x44/0x240 [ 42.385990] load_module+0x1f5c/0x2874 [ 42.389733] __do_sys_init_module+0x1d8/0x2ac [ 42.394082] __arm64_sys_init_module+0x18/0x20 [ 42.398518] invoke_syscall.constprop.0+0x4c/0xe0 [ 42.403211] do_el0_svc+0x50/0xf0 [ 42.406517] el0_svc+0x4c/0xcc [ 42.409565] el0t_64_sync_handler+0xe0/0x110 [ 42.413827] el0t_64_sync+0x15c/0x160 [ 42.674858] mt798x-wmac 18000000.wifi: HW/SW Version: 0x8a108a10, Build Time: 20221208201745a [ 42.674858] [ 42.692078] mt798x-wmac 18000000.wifi: WM Firmware Version: ____000000, Build Time: 20221208201806 [ 42.735606] mt798x-wmac 18000000.wifi: WA Firmware Version: DEV_000000, Build Time: 20221208202048 Tested-by:Daniel Golle <daniel@makrotopia.org> Fixes: 2666bece ("wifi: mt76: introduce rxwi and rx token utility routines") Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Acked-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
-
- 29 Aug, 2023 27 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds authored
Pull networking updates from Paolo Abeni: "Core: - Increase size limits for to-be-sent skb frag allocations. This allows tun, tap devices and packet sockets to better cope with large writes operations - Store netdevs in an xarray, to simplify iterating over netdevs - Refactor nexthop selection for multipath routes - Improve sched class lifetime handling - Add backup nexthop ID support for bridge - Implement drop reasons support in openvswitch - Several data races annotations and fixes - Constify the sk parameter of routing functions - Prepend kernel version to netconsole message Protocols: - Implement support for TCP probing the peer being under memory pressure - Remove hard coded limitation on IPv6 specific info placement inside the socket struct - Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated per socket scaling factor - Scaling-up the IPv6 expired route GC via a separated list of expiring routes - In-kernel support for the TLS alert protocol - Better support for UDP reuseport with connected sockets - Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR header size - Get rid of additional ancillary per MPTCP connection struct socket - Implement support for BPF-based MPTCP packet schedulers - Format MPTCP subtests selftests results in TAP - Several new SMC 2.1 features including unique experimental options, max connections per lgr negotiation, max links per lgr negotiation BPF: - Multi-buffer support in AF_XDP - Add multi uprobe BPF links for attaching multiple uprobes and usdt probes, which is significantly faster and saves extra fds - Implement an fd-based tc BPF attach API (TCX) and BPF link support on top of it - Add SO_REUSEPORT support for TC bpf_sk_assign - Support new instructions from cpu v4 to simplify the generated code and feature completeness, for x86, arm64, riscv64 - Support defragmenting IPv(4|6) packets in BPF - Teach verifier actual bounds of bpf_get_smp_processor_id() and fix perf+libbpf issue related to custom section handling - Introduce bpf map element count and enable it for all program types - Add a BPF hook in sys_socket() to change the protocol ID from IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy - Introduce bpf_me_mcache_free_rcu() and fix OOM under stress - Add uprobe support for the bpf_get_func_ip helper - Check skb ownership against full socket - Support for up to 12 arguments in BPF trampoline - Extend link_info for kprobe_multi and perf_event links Netfilter: - Speed-up process exit by aborting ruleset validation if a fatal signal is pending - Allow NLA_POLICY_MASK to be used with BE16/BE32 types Driver API: - Page pool optimizations, to improve data locality and cache usage - Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the need for raw ioctl() handling in drivers - Simplify genetlink dump operations (doit/dumpit) providing them the common information already populated in struct genl_info - Extend and use the yaml devlink specs to [re]generate the split ops - Introduce devlink selective dumps, to allow SF filtering SF based on handle and other attributes - Add yaml netlink spec for netlink-raw families, allow route, link and address related queries via the ynl tool - Remove phylink legacy mode support - Support offload LED blinking to phy - Add devlink port function attributes for IPsec New hardware / drivers: - Ethernet: - Broadcom ASP 2.0 (72165) ethernet controller - MediaTek MT7988 SoC - Texas Instruments AM654 SoC - Texas Instruments IEP driver - Atheros qca8081 phy - Marvell 88Q2110 phy - NXP TJA1120 phy - WiFi: - MediaTek mt7981 support - Can: - Kvaser SmartFusion2 PCI Express devices - Allwinner T113 controllers - Texas Instruments tcan4552/4553 chips - Bluetooth: - Intel Gale Peak - Qualcomm WCN3988 and WCN7850 - NXP AW693 and IW624 - Mediatek MT2925 Drivers: - Ethernet NICs: - nVidia/Mellanox: - mlx5: - support UDP encapsulation in packet offload mode - IPsec packet offload support in eswitch mode - improve aRFS observability by adding new set of counters - extends MACsec offload support to cover RoCE traffic - dynamic completion EQs - mlx4: - convert to use auxiliary bus instead of custom interface logic - Intel - ice: - implement switchdev bridge offload, even for LAG interfaces - implement SRIOV support for LAG interfaces - igc: - add support for multiple in-flight TX timestamps - Broadcom: - bnxt: - use the unified RX page pool buffers for XDP and non-XDP - use the NAPI skb allocation cache - OcteonTX2: - support Round Robin scheduling HTB offload - TC flower offload support for SPI field - Freescale: - add XDP_TX feature support - AMD: - ionic: add support for PCI FLR event - sfc: - basic conntrack offload - introduce eth, ipv4 and ipv6 pedit offloads - ST Microelectronics: - stmmac: maximze PTP timestamping resolution - Virtual NICs: - Microsoft vNIC: - batch ringing RX queue doorbell on receiving packets - add page pool for RX buffers - Virtio vNIC: - add per queue interrupt coalescing support - Google vNIC: - add queue-page-list mode support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add port range matching tc-flower offload - permit enslavement to netdevices with uppers - Ethernet embedded switches: - Marvell (mv88e6xxx): - convert to phylink_pcs - Renesas: - r8A779fx: add speed change support - rzn1: enables vlan support - Ethernet PHYs: - convert mv88e6xxx to phylink_pcs - WiFi: - Qualcomm Wi-Fi 7 (ath12k): - extremely High Throughput (EHT) PHY support - RealTek (rtl8xxxu): - enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU), RTL8192EU and RTL8723BU - RealTek (rtw89): - Introduce Time Averaged SAR (TAS) support - Connector: - support for event filtering" * tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1806 commits) net: ethernet: mtk_wed: minor change in wed_{tx,rx}info_show net: ethernet: mtk_wed: add some more info in wed_txinfo_show handler net: stmmac: clarify difference between "interface" and "phy_interface" r8152: add vendor/device ID pair for D-Link DUB-E250 devlink: move devlink_notify_register/unregister() to dev.c devlink: move small_ops definition into netlink.c devlink: move tracepoint definitions into core.c devlink: push linecard related code into separate file devlink: push rate related code into separate file devlink: push trap related code into separate file devlink: use tracepoint_enabled() helper devlink: push region related code into separate file devlink: push param related code into separate file devlink: push resource related code into separate file devlink: push dpipe related code into separate file devlink: move and rename devlink_dpipe_send_and_alloc_skb() helper devlink: push shared buffer related code into separate file devlink: push port related code into separate file devlink: push object register/unregister notifications into separate helpers inet: fix IP_TRANSPARENT error handling ... -
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto updates from Herbert Xu: "API: - Move crypto engine callback from tfm ctx into algorithm object - Fix atomic sleep bug in crypto_destroy_instance - Move lib/mpi into lib/crypto Algorithms: - Add chacha20 and poly1305 implementation for powerpc p10 Drivers: - Add AES skcipher and aead support to starfive - Add Dynamic Boost Control support to ccp - Add support for STM32P13 platform to stm32" * tag 'v6.6-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (149 commits) Revert "dt-bindings: crypto: qcom,prng: Add SM8450" crypto: chelsio - Remove unused declarations X.509: if signature is unsupported skip validation crypto: qat - fix crypto capability detection for 4xxx crypto: drivers - Explicitly include correct DT includes crypto: engine - Remove crypto_engine_ctx crypto: zynqmp - Use new crypto_engine_op interface crypto: virtio - Use new crypto_engine_op interface crypto: stm32 - Use new crypto_engine_op interface crypto: jh7110 - Use new crypto_engine_op interface crypto: rk3288 - Use new crypto_engine_op interface crypto: omap - Use new crypto_engine_op interface crypto: keembay - Use new crypto_engine_op interface crypto: sl3516 - Use new crypto_engine_op interface crypto: caam - Use new crypto_engine_op interface crypto: aspeed - Remove non-standard sha512 algorithms crypto: aspeed - Use new crypto_engine_op interface crypto: amlogic - Use new crypto_engine_op interface crypto: sun8i-ss - Use new crypto_engine_op interface crypto: sun8i-ce - Use new crypto_engine_op interface ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linuxLinus Torvalds authored
Pull gpio updates from Bartosz Golaszewski: "We have a lot of code refactoring using common helpers and ended up removing more lines then we're adding this release cycle. Nothing really stands out, just small updates all over the place. Core GPIOLIB updates: - wake-up poll() in user-space on device unbind - improve fwnode usage - interrupt domain handling improvements - correctly handle the ngpios property in gpio-mmio Driver cleanups: - remove unneeded calls to platform_set_drvdata() all around the place - remove unneeded of_match_ptr() expansions whenever a driver depends on CONFIG_OF - remove redundant calls to dev_err_probe() from gpio-omap and gpio-davinci Driver improvements: - use autopointers and guards from cleanup.h in gpio-sim - shrink code in gpio-sim using some common helpers - convert the idio family of drivers to using gpio-regmap - convert gpio-ws16c48 to using gpio-regmap - use devres to simplify code in gpio-pisosr and gpio-mxc - update gpio-sifive: support IRQ wake, improve interrupt handling, allow building as module - make gpio-ge and gpio-bcm-kona OF-independent (plus some minor tweaks) - add support for new models in gpio-pca953x and gpio-ds4520 - add runtime PM support to gpio-mxc - fix a build warning in gpio-mxs - add support for adding pin ranges to gpio-mlxbf3 - add counter/timer support to gpio-104-dio-48e - switch to dynamic GPIO base allocation in gpio-vf610 - minor oneliners here and there Device-tree bindings updates: - enable the gpio-line-names property in snps,dw-apb and STMPE GPIO - document new models in fsl-imx-gpio, ds4520 and pca95xx - convert the bindings for brcm,kona-gpio to YAML" * tag 'gpio-updates-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (94 commits) gpio: pca953x: add support for TCA9538 dt-bindings: gpio: pca95xx: document new tca9538 chip gpio: pca953x: Use i2c_get_match_data() gpio: mlxbf3: use capital "OR" for multiple licenses in SPDX gpio: pcf857x: Extend match data support for OF tables gpio: vf610: switch to dynamic allocat GPIO base gpiolib: provide and use gpiod_line_state_notify() gpio: cdev: wake up lineevent poll() on device unbind gpio: cdev: wake up linereq poll() on device unbind gpio: cdev: wake up chardev poll() on device unbind gpiolib: add a second blocking notifier to struct gpio_device gpio: cdev: open-code to_gpio_chardev_data() gpiolib: rename the gpio_device notifier gpio: mlxbf3: Support add_pin_ranges() gpio: mxc: Use helper function devm_clk_get_optional_enabled() gpio: pca9570: fix kerneldoc gpio: sim: simplify code with cleanup helpers gpio: sim: replace memmove() + strstrip() with skip_spaces() + strim() gpio: sim: simplify gpio_sim_device_config_live_store() gpio: mxc: release the parent IRQ in runtime suspend ... -
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-stagingLinus Torvalds authored
Pull hwmon updates from Guenter Roeck: "New drivers: - Renesas HS3001 Chip support added to existing drivers: - pmbus/mp2975 driver now supports MP2971 and MP2973 Functional improvements: - Additional voltage and temperature sensor support for NCT6798/NCT6799 in nt6755 driver - it87 driver now detects AMDTSI sensor type - dimmtemp now supports more than 32 DIMMs Driver removals: - sm665 driver removed as unsupportable and long since obsolete .. and minor fixes, cleanups, and simplifications in several drivers" * tag 'hwmon-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (57 commits) hwmon: (tmp513) Simplify probe() hwmon: (tmp513) Fix the channel number in tmp51x_is_visible() hwmon: (mlxreg-fan) Extend number of supported fans hwmon: (sis5595) Do PCI error checks on own line hwmon: (vt8231) Do PCI error checks on own line hwmon: (via686a) Do PCI error checks on own line hwmon: pmbus: Fix -EIO seen on pli1209 hwmon: pmbus: Drop unnecessary clear fault page hwmon: pmbus: Reduce clear fault page invocations hwmon: (nsa320-hwmon) Remove redundant of_match_ptr() hwmon: (pmbus/ucd9200) fix Wvoid-pointer-to-enum-cast warning hwmon: (pmbus/ucd9000) fix Wvoid-pointer-to-enum-cast warning hwmon: (pmbus/tps53679) fix Wvoid-pointer-to-enum-cast warning hwmon: (pmbus/ibm-cffps) fix Wvoid-pointer-to-enum-cast warning hwmon: (tmp513) fix Wvoid-pointer-to-enum-cast warning hwmon: (max6697) fix Wvoid-pointer-to-enum-cast warning hwmon: (max20730) fix Wvoid-pointer-to-enum-cast warning hwmon: (lm90) fix Wvoid-pointer-to-enum-cast warning hwmon: (lm85) fix Wvoid-pointer-to-enum-cast warning hwmon: (lm75) fix Wvoid-pointer-to-enum-cast warning ... -
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull MMC updates from Ulf Hansson: "MMC core: - Convert drivers to use the ->remove_new() callback - Propagate the removable attribute for the card's device MMC host: - Convert drivers to use the ->remove_new() callback - atmel-mci: Convert to gpio descriptors and cleanup the code - davinci: Make SDIO irq truly optional - renesas_sdhi: Register irqs before registering controller - sdhci: Simplify the sdhci_pltfm_* interface a bit - sdhci-esdhc-imx: Improve support for the 1.8V errata - sdhci-of-at91: Add support for the microchip sam9x7 variant - sdhci-of-dwcmshc: Add support for runtime PM - sdhci-pci-o2micro: Add support for the new Bayhub GG8 variant - sdhci-sprd: Add support for SD high-speed mode tuning - uniphier-sd: Register irqs before registering controller" * tag 'mmc-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (108 commits) mmc: atmel-mci: Move card detect gpio polarity quirk to gpiolib mmc: atmel-mci: move atmel MCI header file mmc: atmel-mci: Convert to gpio descriptors mmc: sdhci-sprd: Add SD HS mode online tuning mmc: core: Add host specific tuning support for SD HS mode mmc: sdhci-of-dwcmshc: Add runtime PM operations mmc: sdhci-of-dwcmshc: Add error handling in dwcmshc_resume mmc: sdhci-esdhc-imx: improve ESDHC_FLAG_ERR010450 mmc: sdhci-pltfm: Rename sdhci_pltfm_register() mmc: sdhci-pltfm: Remove sdhci_pltfm_unregister() mmc: sdhci-st: Use sdhci_pltfm_remove() mmc: sdhci-pxav2: Use sdhci_pltfm_remove() mmc: sdhci-of-sparx5: Use sdhci_pltfm_remove() mmc: sdhci-of-hlwd: Use sdhci_pltfm_remove() mmc: sdhci-of-esdhc: Use sdhci_pltfm_remove() mmc: sdhci-of-at91: Use sdhci_pltfm_remove() mmc: sdhci-of-arasan: Use sdhci_pltfm_remove() mmc: sdhci-iproc: Use sdhci_pltfm_remove() mmc: sdhci_f_sdh30: Use sdhci_pltfm_remove() mmc: sdhci-dove: Use sdhci_pltfm_remove() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spiLinus Torvalds authored
Pull spi updates from Mark Brown: "There's been quite a lot of generic activity here, but more administrative than featuers. We also have a bunch of new drivers, including one that's part of a MFD so we pulled in the core parts of that: - Lots of work from both Yang Yingliang and Andy Shevchenko on moving to host/device/controller based terminology for devices. - QuadSPI SPI support for Allwinner sun6i. - New device support Cirrus Logic CS43L43, Longsoon, Qualcomm GENI QuPv3 and StarFive JH7110 QSPI" * tag 'spi-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (151 commits) spi: at91-usart: Use PTR_ERR_OR_ZERO() to simplify code spi: spi-sn-f-ospi: switch to use modern name spi: sifive: switch to use modern name spi: sh: switch to use modern name spi: sh-sci: switch to use modern name spi: sh-msiof: switch to use modern name spi: sh-hspi: switch to use modern name spi: sc18is602: switch to use modern name spi: s3c64xx: switch to use modern name spi: rzv2m-csi: switch to use devm_spi_alloc_host() spi: rspi: switch to use spi_alloc_host() spi: rockchip: switch to use modern name spi: rockchip-sfc: switch to use modern name spi: realtek-rtl: switch to use devm_spi_alloc_host() spi: rb4xx: switch to use modern name spi: qup: switch to use modern name spi: spi-qcom-qspi: switch to use modern name spi: pxa2xx: switch to use modern name spi: ppc4xx: switch to use modern name spi: spl022: switch to use modern name ... -
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulatorLinus Torvalds authored
Pull regulator updates from Mark Brown: "Other than new device support and some minor fixes this has been a really quiet release, the only notable things are the new drivers. There's a couple of MFDs among the new devices so the generic parts are pulled in: - Support for Analog Devices MAX77831/57/59, Awinc AW37503, Qualcom PMX75 and RFGEN, RealTek RT5733, RichTek RTQ2208 and Texas Instruments TPS65086" * tag 'regulator-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (68 commits) regulator: userspace-consumer: Drop event support for this cycle regulator: aw37503: Switch back to use struct i2c_driver's .probe() dt-bindings: regulator: qcom,rpmh-regulator: allow i, j, l, m & n as RPMh resource name suffix regulator: dt-bindings: Add Awinic AW37503 regulator: aw37503: add regulator driver for Awinic AW37503 regulator: tps65086: Select dedicated regulator config for chip variant mfd: tps65086: Read DEVICE ID register 1 from device regulator: raa215300: Update help description regulator: raa215300: Add missing blank space regulator: raa215300: Change rate from 32000->32768 regulator: db8500-prcmu: Remove unused declaration power_state_active_is_enabled() regulator: raa215300: Add const definition regulator: raa215300: Fix resource leak in case of error regulator: rtq2208: Switch back to use struct i2c_driver's .probe() regulator: lp872x: Fix Wvoid-pointer-to-enum-cast warning regulator: max77857: Fix Wvoid-pointer-to-enum-cast warning regulator: ltc3589: Fix Wvoid-pointer-to-enum-cast warning regulator: qcom_rpm-regulator: Use devm_kmemdup to replace devm_kmalloc + memcpy regulator: tps6286x-regulator: Remove redundant of_match_ptr() macros regulator: pfuze100-regulator: Remove redundant of_match_ptr() macro ... -
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmapLinus Torvalds authored
Pull regmap updates from Mark Brown: "This is a much quieter release than the past few, there's one small API addition that I noticed a user for in ALSA and a bunch of cleanups: - Provide an interface for determining if a register is present in the cache and add a user of it in ALSA. - Full support for dynamic allocations, following the temporary bodges that were done as fixes in the previous release. - Remove the unused and questionably working 64 bit support" * tag 'regmap-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: Fix the type used for a bitmap pointer regmap: Remove dynamic allocation warnings for rbtree and maple regmap: rbtree: Use alloc_flags for memory allocations regmap: maple: Use alloc_flags for memory allocations regmap: Reject fast_io regmap configurations with RBTREE and MAPLE caches ALSA: hda: Use regcache_reg_cached() rather than open coding regmap: Provide test for regcache_reg_present() regmap: Let users check if a register is cached regmap: Provide user selectable option to enable regmap regmap: mmio: Remove unused 64-bit support code regmap: cache: Revert "Add 64-bit mode support" regmap: Revert "add 64-bit mode support" and Co. -
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsiLinus Torvalds authored
Pull HSI update from Sebastian Reichel: - explicitly include correct DT includes * tag 'hsi-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi: hsi: omap_ssi: Explicitly include correct DT includes
-
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supplyLinus Torvalds authored
Pull power supply and reset updates from Sebastian Reichel: - core: avoid duplicate hwmon device from thermal framework - convert multiple drivers to devm_platform_ioremap_resource - at91-reset: add sysfs interface to the power on reason - misc small fixes and improvements * tag 'for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: power: supply: qcom_pmi8998_charger: fix charger status power: supply: qcom_pmi8998_charger: remove CHARGE_CONTROL_LIMIT_* props power: supply: qcom_pmi8998_charger: fix uninitialized variable power: reset: oxnas-restart: remove obsolete restart driver power: supply: core: Avoid duplicate hwmon device from thermal framework power: reset: ocelot: Convert to devm_platform_ioremap_resource() power: reset: msm: Convert to devm_platform_ioremap_resource() power: reset: gemini-poweroff: Convert to devm_platform_ioremap_resource() power: reset: brcm-kona: Convert to devm_platform_ioremap_resource() power: reset: at91-sama5d2_shdwc: Convert to devm_platform_ioremap_resource() power: reset: at91-poweroff: Convert to devm_platform_ioremap_resource() power: reset: at91-reset: add sysfs interface to the power on reason power: supply: bd99954: make read-only array sub_status_reg power: supply: bq24190: Considers FORCE_20PCT when getting IPRECHG power: Explicitly include correct DT includes
-
https://github.com/ojeda/linuxLinus Torvalds authored
Pull auxdisplay update from Miguel Ojeda: - hd44780: move cursor home after clear display command The change allows to support displays like the NewHaven NHD-0220DZW-AG5 which has a non-standard controller. * tag 'auxdisplay-6.6' of https://github.com/ojeda/linux: auxdisplay: hd44780: move cursor home after clear display command
-
https://github.com/Rust-for-Linux/linuxLinus Torvalds authored
Pull rust updates from Miguel Ojeda: "In terms of lines, most changes this time are on the pinned-init API and infrastructure. While we have a Rust version upgrade, and thus a bunch of changes from the vendored 'alloc' crate as usual, this time those do not account for many lines. Toolchain and infrastructure: - Upgrade to Rust 1.71.1. This is the second such upgrade, which is a smaller jump compared to the last time. This version allows us to remove the '__rust_*' allocator functions -- the compiler now generates them as expected, thus now our 'KernelAllocator' is used. It also introduces the 'offset_of!' macro in the standard library (as an unstable feature) which we will need soon. So far, we were using a declarative macro as a prerequisite in some not-yet-landed patch series, which did not support sub-fields (i.e. nested structs): #[repr(C)] struct S { a: u16, b: (u8, u8), } assert_eq!(offset_of!(S, b.1), 3); - Upgrade to bindgen 0.65.1. This is the first time we upgrade its version. Given it is a fairly big jump, it comes with a fair number of improvements/changes that affect us, such as a fix needed to support LLVM 16 as well as proper support for '__noreturn' C functions, which are now mapped to return the '!' type in Rust: void __noreturn f(void); // C pub fn f() -> !; // Rust - 'scripts/rust_is_available.sh' improvements and fixes. This series takes care of all the issues known so far and adds a few new checks to cover for even more cases, plus adds some more help texts. All this together will hopefully make problematic setups easier to identify and to be solved by users building the kernel. In addition, it adds a test suite which covers all branches of the shell script, as well as tests for the issues found so far. - Support rust-analyzer for out-of-tree modules too. - Give 'cfg's to rust-analyzer for the 'core' and 'alloc' crates. - Drop 'scripts/is_rust_module.sh' since it is not needed anymore. Macros crate: - New 'paste!' proc macro. This macro is a more flexible version of 'concat_idents!': it allows the resulting identifier to be used to declare new items and it allows to transform the identifiers before concatenating them, e.g. let x_1 = 42; paste!(let [<x _2>] = [<x _1>];); assert!(x_1 == x_2); The macro is then used for several of the pinned-init API changes in this pull. Pinned-init API: - Make '#[pin_data]' compatible with conditional compilation of fields, allowing to write code like: #[pin_data] pub struct Foo { #[cfg(CONFIG_BAR)] a: Bar, #[cfg(not(CONFIG_BAR))] a: Baz, } - New '#[derive(Zeroable)]' proc macro for the 'Zeroable' trait, which allows 'unsafe' implementations for structs where every field implements the 'Zeroable' trait, e.g.: #[derive(Zeroable)] pub struct DriverData { id: i64, buf_ptr: *mut u8, len: usize, } - Add '..Zeroable::zeroed()' syntax to the 'pin_init!' macro for zeroing all other fields, e.g.: pin_init!(Buf { buf: [1; 64], ..Zeroable::zeroed() }); - New '{,pin_}init_array_from_fn()' functions to create array initializers given a generator function, e.g.: let b: Box<[usize; 1_000]> = Box::init::<Error>( init_array_from_fn(|i| i) ).unwrap(); assert_eq!(b.len(), 1_000); assert_eq!(b[123], 123); - New '{,pin_}chain' methods for '{,Pin}Init<T, E>' that allow to execute a closure on the value directly after initialization, e.g.: let foo = init!(Foo { buf <- init::zeroed() }).chain(|foo| { foo.setup(); Ok(()) }); - Support arbitrary paths in init macros, instead of just identifiers and generic types. - Implement the 'Zeroable' trait for the 'UnsafeCell<T>' and 'Opaque<T>' types. - Make initializer values inaccessible after initialization. - Make guards in the init macros hygienic. 'allocator' module: - Use 'krealloc_aligned()' in 'KernelAllocator::alloc' preventing misaligned allocations when the Rust 1.71.1 upgrade is applied later in this pull. The equivalent fix for the previous compiler version (where 'KernelAllocator' is not yet used) was merged into 6.5 already, which added the 'krealloc_aligned()' function used here. - Implement 'KernelAllocator::{realloc, alloc_zeroed}' for performance, using 'krealloc_aligned()' too, which forwards the call to the C API. 'types' module: - Make 'Opaque' be '!Unpin', removing the need to add a 'PhantomPinned' field to Rust structs that contain C structs which must not be moved. - Make 'Opaque' use 'UnsafeCell' as the outer type, rather than inner. Documentation: - Suggest obtaining the source code of the Rust's 'core' library using the tarball instead of the repository. MAINTAINERS: - Andreas and Alice, from Samsung and Google respectively, are joining as reviewers of the "RUST" entry. As well as a few other minor changes and cleanups" * tag 'rust-6.6' of https://github.com/Rust-for-Linux/linux: (42 commits) rust: init: update expanded macro explanation rust: init: add `{pin_}chain` functions to `{Pin}Init<T, E>` rust: init: make `PinInit<T, E>` a supertrait of `Init<T, E>` rust: init: implement `Zeroable` for `UnsafeCell<T>` and `Opaque<T>` rust: init: add support for arbitrary paths in init macros rust: init: add functions to create array initializers rust: init: add `..Zeroable::zeroed()` syntax for zeroing all missing fields rust: init: make initializer values inaccessible after initializing rust: init: wrap type checking struct initializers in a closure rust: init: make guards in the init macros hygienic rust: add derive macro for `Zeroable` rust: init: make `#[pin_data]` compatible with conditional compilation of fields rust: init: consolidate init macros docs: rust: clarify what 'rustup override' does docs: rust: update instructions for obtaining 'core' source docs: rust: add command line to rust-analyzer section scripts: generate_rust_analyzer: provide `cfg`s for `core` and `alloc` rust: bindgen: upgrade to 0.65.1 rust: enable `no_mangle_with_rust_abi` Clippy lint rust: upgrade to Rust 1.71.1 ... -
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmddLinus Torvalds authored
Pull tpm updates from Jarkko Sakkinen: - Restrict linking of keys to .ima and .evm keyrings based on digitalSignature attribute in the certificate - PowerVM: load machine owner keys into the .machine [1] keyring - PowerVM: load module signing keys into the secondary trusted keyring (keys blessed by the vendor) - tpm_tis_spi: half-duplex transfer mode - tpm_tis: retry corrupted transfers - Apply revocation list (.mokx) to an all system keyrings (e.g. .machine keyring) Link: https://blogs.oracle.com/linux/post/the-machine-keyring [1] * tag 'tpmdd-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: certs: Reference revocation list for all keyrings tpm/tpm_tis_synquacer: Use module_platform_driver macro to simplify the code tpm: remove redundant variable len tpm_tis: Resend command to recover from data transfer errors tpm_tis: Use responseRetry to recover from data transfer errors tpm_tis: Move CRC check to generic send routine tpm_tis_spi: Add hardware wait polling KEYS: Replace all non-returning strlcpy with strscpy integrity: PowerVM support for loading third party code signing keys integrity: PowerVM machine keyring enablement integrity: check whether imputed trust is enabled integrity: remove global variable from machine_keyring.c integrity: ignore keys failing CA restrictions on non-UEFI platform integrity: PowerVM support for loading CA keys on machine keyring integrity: Enforce digitalSignature usage in the ima and evm keyrings KEYS: DigitalSignature link restriction tpm_tis: Revert "tpm_tis: Disable interrupts on ThinkPad T490s"
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni authored
Merge in late fixes to prepare for the 6.6 net-next PR. No conflicts. Signed-off-by:Paolo Abeni <pabeni@redhat.com>
-
Linus Torvalds authored
Merge tag 'linux-kselftest-nolibc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull nolibc updates from Shuah Khan: "Nolibc: - improved portability by removing build errors with -ENOSYS - added syscall6() on MIPS to support pselect6() and mmap() - added setvbuf(), rmdir(), pipe(), pipe2() - add support for ppc/ppc64 - environ is no longer optional - fixed frame pointer issues at -O0 - dropped sys_stat() in favor of sys_statx() - centralized _start_c() to remove lots of asm code - switched size_t to __SIZE_TYPE__ Selftests: - improved status reporting (success/warning/failure counts, path to log file) - various code cleanups (indent, unused variables, ...) - more consistent test numbering - enabled compiler warnings - dropped unreliable chmod_net test - improved reliability (create /dev/zero & /tmp, rely less on /proc) - new tests (brk/sbrk/mmap/munmap) - improved compatibility with musl - new run-nolibc-test target to build and run natively - new run-libc-test target to build and run against native libc - made the cmdline parser more reliable against boolean arguments - dropped dependency on memfd for vfprintf() test - nolibc-test is no longer stripped - added support for extending ARCH via XARCH Other: - add Thomas as co-maintainer" * tag 'linux-kselftest-nolibc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (103 commits) tools/nolibc: avoid undesired casts in the __sysret() macro tools/nolibc: keep brk(), sbrk(), mmap() away from __sysret() tools/nolibc: silence ppc64 compile warnings selftests/nolibc: libc-test: use HOSTCC instead of CC tools/nolibc: stackprotector.h: make __stack_chk_init static selftests/nolibc: allow report with existing test log selftests/nolibc: add test support for ppc64 selftests/nolibc: add test support for ppc64le selftests/nolibc: add test support for ppc selftests/nolibc: add XARCH and ARCH mapping support tools/nolibc: add support for powerpc64 tools/nolibc: add support for powerpc MAINTAINERS: nolibc: add myself as co-maintainer selftests/nolibc: enable compiler warnings selftests/nolibc: don't strip nolibc-test selftests/nolibc: prevent out of bounds access in expect_vfprintf selftests/nolibc: use correct return type for read() and write() selftests/nolibc: avoid sign-compare warnings selftests/nolibc: avoid unused parameter warnings selftests/nolibc: make functions static if possible ...
-
Linus Torvalds authored
Merge tag 'linux-kselftest-kunit-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kunit updates from Shuah Khan: - add support for running Rust documentation tests as KUnit tests - make init, str, sync, types doctests compilable/testable - add support for attributes API which include speed, modules attributes, ability to filter and report attributes - add support for marking tests slow using attributes API - add attributes API documentation - fix a wild-memory-access bug in kunit_filter_suites() and a possible memory leak in kunit_filter_suites() - add support for counting number of test suites in a module, list action to kunit test modules, and test filtering on module tests * tag 'linux-kselftest-kunit-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (25 commits) kunit: fix struct kunit_attr header kunit: replace KUNIT_TRIGGER_STATIC_STUB maro with KUNIT_STATIC_STUB_REDIRECT kunit: Allow kunit test modules to use test filtering kunit: Make 'list' action available to kunit test modules kunit: Report the count of test suites in a module kunit: fix uninitialized variables bug in attributes filtering kunit: fix possible memory leak in kunit_filter_suites() kunit: fix wild-memory-access bug in kunit_filter_suites() kunit: Add documentation of KUnit test attributes kunit: add tests for filtering attributes kunit: time: Mark test as slow using test attributes kunit: memcpy: Mark tests as slow using test attributes kunit: tool: Add command line interface to filter and report attributes kunit: Add ability to filter attributes kunit: Add module attribute kunit: Add speed attribute kunit: Add test attributes API structure MAINTAINERS: add Rust KUnit files to the KUnit entry rust: support running Rust documentation tests as KUnit ones rust: types: make doctests compilable/testable ...
-
Linus Torvalds authored
Merge tag 'linux-kselftest-next-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest updates from Shuah Khan: "A mix of fixes, enhancements, and new tests. Bulk of the changes enhance and fix rseq and resctrl tests. In addition, user_events, dmabuf-heaps and perf_events are added to default kselftest build and test coverage. A futex test fix, enhance prctl test coverage, and minor fixes are included in this update" * tag 'linux-kselftest-next-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (32 commits) selftests: cachestat: use proper syscall number macro selftests: cachestat: properly link in librt selftests/futex: Order calls to futex_lock_pi selftests: Hook more tests into the build infrastructure selftests/user_events: Reenable build selftests/filesystems: Add six consecutive 'x' characters to mktemp selftests/rseq: Use rseq_unqual_scalar_typeof in macros selftests/rseq: Fix arm64 buggy load-acquire/store-release macros selftests/rseq: Implement rseq_unqual_scalar_typeof selftests/rseq: Fix CID_ID typo in Makefile selftests:prctl: add set-process-name to .gitignore selftests:prctl: Fix make clean override warning selftests/resctrl: Remove test type checks from cat_val() selftests/resctrl: Pass the real number of tests to show_cache_info() selftests/resctrl: Move CAT/CMT test global vars to function they are used in selftests/resctrl: Don't use variable argument list for ->setup() selftests/resctrl: Don't pass test name to fill_buf selftests/resctrl: Improve parameter consistency in fill_buf selftests/resctrl: Remove unnecessary startptr global from fill_buf selftests/resctrl: Remove "malloc_and_init_memory" param from run_fill_buf() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull thermal control updates from Rafael Wysocki: "These rework the Intel DTS IOSF and the ACPI thermal drivers to pass tables of generic trip point structures to the core during initialization and make some requisite modifications in the thermal core, fix a few issues elsewhere and clean up code. This includes changes that are present in the ACPI updates too, because they involve both ACPI and the thermal core. The list of specific changes below is limited to thermal control, however. Specifics: - Make the ACPI thermal driver use its own Notify() handler (Michal Wilczynski) - Rework the ACPI thermal driver to use a table of generic trip point structures on top of the internal representation of trip points and remove thermal zone callbacks that are not necessary any more from that driver (Rafael Wysocki) - Fix a few issues in the Intel DTS IOSF thermal driver, clean up code in it and make it pass tables of generic trip point structures to the core during thermal zone registration (Rafael Wysocki) - Drop a redundant check from the Intel DTS IOSF thermal driver's "remove" routine (Zhang Rui) - Use module_platform_driver() to replace an open-coded counterpart of it in the int340x thermal driver (Yang Yingliang) - Fix possible uninitialized value access in __thermal_of_bind() and __thermal_of_unbind() (Peng Fan) - Make the int3400 driver use thermal zone device wrappers (Daniel Lezcano) - Remove redundant thermal zone state check from the int340x thermal driver (Daniel Lezcano) - Drop non-functional nocrt parameter from ACPI thermal (Mario Limonciello) - Explicitly include correct DT includes in the thermal core and drivers (Rob Herring)" * tag 'thermal-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal: intel: intel_soc_dts_iosf: Remove redundant check thermal: intel: int340x: simplify the code with module_platform_driver() thermal/of: Fix potential uninitialized value access thermal: intel: intel_soc_dts_iosf: Use struct thermal_trip thermal: intel: intel_soc_dts_iosf: Rework critical trip setup thermal: intel: intel_soc_dts_iosf: Add helper for resetting trip points thermal: intel: intel_soc_dts_iosf: Change initialization ordering thermal: intel: intel_soc_dts_iosf: Pass sensors to update_trip_temp() thermal: intel: intel_soc_dts_iosf: Untangle update_trip_temp() thermal: intel: intel_soc_dts_iosf: Always assume notification support thermal: intel: intel_soc_dts_iosf: Drop redundant symbol definition thermal: intel: intel_soc_dts_iosf: Always use 2 trips thermal: Explicitly include correct DT includes thermal/drivers/int340x: Do not check the thermal zone state thermal/drivers/int3400: Use thermal zone device wrappers -
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management updates from Rafael Wysocki: "These rework cpuidle governors to call tick_nohz_get_sleep_length() less often and fix one of them, rework hibernation to avoid storing pages filled with zeros in hibernation images, switch over some cpufreq drivers to use void remove callbacks, fix and clean up multiple cpufreq drivers, fix the devfreq core, update the cpupower utility and make other assorted improvements. Specifics: - Rework the menu and teo cpuidle governors to avoid calling tick_nohz_get_sleep_length(), which is likely to become quite expensive going forward, too often and improve making decisions regarding whether or not to stop the scheduler tick in the teo governor (Rafael Wysocki) - Improve the performance of cpufreq_stats_create_table() in some cases (Liao Chang) - Fix two issues in the amd-pstate-ut cpufreq driver (Swapnil Sapkal) - Use clamp() helper macro to improve the code readability in cpufreq_verify_within_limits() (Liao Chang) - Set stale CPU frequency to minimum in intel_pstate (Doug Smythies) - Migrate cpufreq drivers for various platforms to use void remove callback (Yangtao Li) - Add online/offline/exit hooks for Tegra driver (Sumit Gupta) - Explicitly include correct DT includes in cpufreq (Rob Herring) - Frequency domain updates for qcom-hw driver (Neil Armstrong) - Modify AMD pstate driver return the highest_perf value (Meng Li) - Generic cleanups for cppc, mediatek and powernow driver (Liao Chang, Konrad Dybcio) - Add more platforms to cpufreq-arm driver's blocklist (AngeloGioacchino Del Regno and Konrad Dybcio) - brcmstb-avs-cpufreq: Fix -Warray-bounds bug (Gustavo A. R. Silva) - Add device PM helpers to allow a device to remain powered-on during system-wide transitions (Ulf Hansson) - Rework hibernation memory snapshotting to avoid storing pages filled with zeros in hibernation image files (Brian Geffon) - Add check to make sure that CPU latency QoS constraints do not use negative values (Clive Lin) - Optimize rp->domains memory allocation in the Intel RAPL power capping driver (xiongxin) - Remove recursion while parsing zones in the arm_scmi power capping driver (Cristian Marussi) - Fix memory leak in devfreq_dev_release() (Boris Brezillon) - Rewrite devfreq_monitor_start() kerneldoc comment (Manivannan Sadhasivam) - Explicitly include correct DT includes in devfreq (Rob Herring) - Remove unsued pm_runtime_update_max_time_suspended() extern declaration (YueHaibing) - Add turbo-boost support to cpupower (Wyes Karny) - Add support for amd_pstate mode change to cpupower (Wyes Karny) - Fix 'cpupower idle_set' command to accept only numeric values of arguments (Likhitha Korrapati) - Clean up OPP code and add new frequency related APIs to it (Viresh Kumar, Manivannan Sadhasivam) - Convert ti cpufreq/opp bindings to json schema (Nishanth Menon)" * tag 'pm-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (74 commits) cpufreq: tegra194: remove opp table in exit hook cpufreq: powernow-k8: Use related_cpus instead of cpus in driver.exit() cpufreq: tegra194: add online/offline hooks cpuidle: teo: Avoid unnecessary variable assignments cpufreq: qcom-cpufreq-hw: add support for 4 freq domains dt-bindings: cpufreq: qcom-hw: add a 4th frequency domain cpufreq: amd-pstate-ut: Fix kernel panic when loading the driver cpufreq: amd-pstate-ut: Remove module parameter access cpufreq: Use clamp() helper macro to improve the code readability PM: sleep: Add helpers to allow a device to remain powered-on PM: QoS: Add check to make sure CPU latency is non-negative PM: runtime: Remove unsued extern declaration of pm_runtime_update_max_time_suspended() cpufreq: intel_pstate: set stale CPU frequency to minimum cpufreq: stats: Improve the performance of cpufreq_stats_create_table() dt-bindings: cpufreq: Convert ti-cpufreq to json schema dt-bindings: opp: Convert ti-omap5-opp-supply to json schema OPP: Fix argument name in doc comment cpuidle: menu: Skip tick_nohz_get_sleep_length() call in some cases cpufreq: cppc: Set fie_disabled to FIE_DISABLED if fails to create kworker_fie cpufreq: cppc: cppc_cpufreq_get_rate() returns zero in all error cases. ... -
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI updates from Rafael Wysocki: "These include new ACPICA material, a rework of the ACPI thermal driver, a switch-over of the ACPI processor driver to using _OSC instead of (long deprecated) _PDC for CPU initialization, a rework of firmware notifications handling in several drivers, fixes and cleanups for suspend-to-idle handling on AMD systems, ACPI backlight driver updates and more. Specifics: - Update the ACPICA code in the kernel to upstream revision 20230628 including the following changes: - Suppress a GCC 12 dangling-pointer warning (Philip Prindeville) - Reformat the ACPI_STATE_COMMON macro and its users (George Guo) - Replace the ternary operator with ACPI_MIN() (Jiangshan Yi) - Add support for _DSC as per ACPI 6.5 (Saket Dumbre) - Remove a duplicate macro from zephyr header (Najumon B.A) - Add data structures for GED and _EVT tracking (Jose Marinho) - Fix misspelled CDAT DSMAS define (Dave Jiang) - Simplify an error message in acpi_ds_result_push() (Christophe Jaillet) - Add a struct size macro related to SRAT (Dave Jiang) - Add AML_NO_OPERAND_RESOLVE flag to Timer (Abhishek Mainkar) - Add support for RISC-V external interrupt controllers in MADT (Sunil V L) - Add RHCT flags, CMO and MMU nodes (Sunil V L) - Change ACPICA version to 20230628 (Bob Moore) - Introduce new wrappers for ACPICA notify handler install/remove and convert multiple drivers to using their own Notify() handlers instead of the ACPI bus type .notify() slated for removal (Michal Wilczynski) - Add backlight=native DMI quirk for Apple iMac12,1 and iMac12,2 (Hans de Goede) - Put ACPI video and its child devices explicitly into D0 on boot to avoid platform firmware confusion (Kai-Heng Feng) - Add backlight=native DMI quirk for Lenovo Ideapad Z470 (Jiri Slaby) - Support obtaining physical CPU ID from MADT on LoongArch (Bibo Mao) - Convert ACPI CPU initialization to using _OSC instead of _PDC that has been depreceted since 2018 and dropped from the specification in ACPI 6.5 (Michal Wilczynski, Rafael Wysocki) - Drop non-functional nocrt parameter from ACPI thermal (Mario Limonciello) - Clean up the ACPI thermal driver, rework the handling of firmware notifications in it and make it provide a table of generic trip point structures to the core during initialization (Rafael Wysocki) - Defer enumeration of devices with _DEP pointing to IVSC (Wentong Wu) - Install SystemCMOS address space handler for ACPI000E (TAD) to meet platform firmware expectations on some platforms (Zhang Rui) - Fix finding the generic error data in the ACPi extlog driver for compatibility with old and new firmware interface versions (Xiaochun Lee) - Remove assorted unused declarations of functions (Yue Haibing) - Move AMBA bus scan handling into arm64 specific directory (Sudeep Holla) - Fix and clean up suspend-to-idle interface for AMD systems (Mario Limonciello, Andy Shevchenko) - Fix string truncation warning in pnpacpi_add_device() (Sunil V L)" * tag 'acpi-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (66 commits) ACPI: x86: s2idle: Add a function to get LPS0 constraint for a device ACPI: x86: s2idle: Add for_each_lpi_constraint() helper ACPI: x86: s2idle: Add more debugging for AMD constraints parsing ACPI: x86: s2idle: Fix a logic error parsing AMD constraints table ACPI: x86: s2idle: Catch multiple ACPI_TYPE_PACKAGE objects ACPI: x86: s2idle: Post-increment variables when getting constraints ACPI: Adjust #ifdef for *_lps0_dev use ACPI: TAD: Install SystemCMOS address space handler for ACPI000E ACPI: Remove assorted unused declarations of functions ACPI: extlog: Fix finding the generic error data for v3 structure PNP: ACPI: Fix string truncation warning ACPI: Remove unused extern declaration acpi_paddr_to_node() ACPI: video: Add backlight=native DMI quirk for Apple iMac12,1 and iMac12,2 ACPI: video: Put ACPI video and its child devices into D0 on boot ACPI: processor: LoongArch: Get physical ID from MADT ACPI: scan: Defer enumeration of devices with a _DEP pointing to IVSC device ACPI: thermal: Eliminate code duplication from acpi_thermal_notify() ACPI: thermal: Drop unnecessary thermal zone callbacks ACPI: thermal: Rework thermal_get_trend() ACPI: thermal: Use trip point table to register thermal zones ... -
Linus Torvalds authored
Merge tag 'tag-chrome-platform-firmware-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform firmware update from Tzung-Bi Shih: - Add MAINTAINERS entry for chrome platform firmware * tag 'tag-chrome-platform-firmware-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: MAINTAINERS: Add drivers/firmware/google/ entry
-
Linus Torvalds authored
Merge tag 'tag-chrome-platform-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform updates from Tzung-Bi Shih: "Improvements: - Remove shutdown timeout on EC panic for offering the filesystem a chance to sync - Support official HID "GOOG0016" for ChromeOS ACPI Fixes: - Print hex string instead of using "%s" for ACPI_TYPE_BUFFER Misc: - Update MAINTAINERS" * tag 'tag-chrome-platform-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: platform/chrome: chromeos_acpi: print hex string for ACPI_TYPE_BUFFER platform/chrome: chromeos_acpi: support official HID GOOG0016 platform/chrome: cros_ec_lpc: Remove EC panic shutdown timeout MAINTAINERS: update maintainers of chrome-platform
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen updates from Juergen Gross: - a bunch of minor cleanups - a patch adding irqfd support for virtio backends running as user daemon supporting Xen guests * tag 'for-linus-6.6-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: privcmd: Add support for irqfd xen/xenbus: Avoid a lockdep warning when adding a watch xen: Fix one kernel-doc comment xen: xenbus: Use helper function IS_ERR_OR_NULL() xen: Switch to use kmemdup() helper xen-pciback: Remove unused function declarations x86/xen: Make virt_to_pfn() a static inline xen: remove a confusing comment on auto-translated guest I/O xen/evtchn: Remove unused function declaration xen_set_affinity_evtchn()
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 updates from Will Deacon: "I think we have a bit less than usual on the architecture side, but that's somewhat balanced out by a large crop of perf/PMU driver updates and extensions to our selftests. CPU features and system registers: - Advertise hinted conditional branch support (FEAT_HBC) to userspace - Avoid false positive "SANITY CHECK" warning when xCR registers differ outside of the length field Documentation: - Fix macro name typo in SME documentation Entry code: - Unmask exceptions earlier on the system call entry path Memory management: - Don't bother clearing PTE_RDONLY for dirty ptes in pte_wrprotect() and pte_modify() Perf and PMU drivers: - Initial support for Coresight TRBE devices on ACPI systems (the coresight driver changes will come later) - Fix hw_breakpoint single-stepping when called from bpf - Fixes for DDR PMU on i.MX8MP SoC - Add NUMA-awareness to Hisilicon PCIe PMU driver - Fix locking dependency issue in Arm DMC620 PMU driver - Workaround Hisilicon erratum 162001900 in the SMMUv3 PMU driver - Add support for Arm CMN-700 r3 parts to the CMN PMU driver - Add support for recent Arm Cortex CPU PMUs - Update Hisilicon PMU maintainers Selftests: - Add a bunch of new features to the hwcap test (JSCVT, PMULL, AES, SHA1, etc) - Fix SSVE test to leave streaming-mode after grabbing the signal context - Add new test for SVE vector-length changes with SME enabled Miscellaneous: - Allow compiler to warn on suspicious looking system register expressions - Work around SDEI firmware bug by aborting any running handlers on a kernel crash - Fix some harmless warnings when building with W=1 - Remove some unused function declarations - Other minor fixes and cleanup" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (62 commits) drivers/perf: hisi: Update HiSilicon PMU maintainers arm_pmu: acpi: Add a representative platform device for TRBE arm_pmu: acpi: Refactor arm_spe_acpi_register_device() kselftest/arm64: Fix hwcaps selftest build hw_breakpoint: fix single-stepping when using bpf_overflow_handler arm64/sysreg: refactor deprecated strncpy kselftest/arm64: add jscvt feature to hwcap test kselftest/arm64: add pmull feature to hwcap test kselftest/arm64: add AES feature check to hwcap test kselftest/arm64: add SHA1 and related features to hwcap test arm64: sysreg: Generate C compiler warnings on {read,write}_sysreg_s arguments kselftest/arm64: build BTI tests in output directory perf/imx_ddr: don't enable counter0 if none of 4 counters are used perf/imx_ddr: speed up overflow frequency of cycle drivers/perf: hisi: Schedule perf session according to locality kselftest/arm64: fix a memleak in zt_regs_run() perf/arm-dmc620: Fix dmc620_pmu_irqs_lock/cpu_hotplug_lock circular lock dependency perf/smmuv3: Add MODULE_ALIAS for module auto loading perf/smmuv3: Enable HiSilicon Erratum 162001900 quirk for HIP08/09 kselftest/arm64: Size sycall-abi buffers for the actual maximum VL ... -
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68kLinus Torvalds authored
Pull m68k updates from Geert Uytterhoeven: - Remove <asm/export.h> - Miscellaneous W=1 fixes - defconfig updates * tag 'm68k-for-v6.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: zorro: Include zorro.h in names.c m68k: Add memcmp() declaration m68k: Define __div64_32() to avoid a warning m68k: Remove <asm/export.h> m68k: Replace #include <asm/export.h> with #include <linux/export.h> m68k: defconfig: Update defconfigs for v6.5-rc1
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 updates from Heiko Carstens: - Add vfio-ap support to pass-through crypto devices to secure execution guests - Add API ordinal 6 support to zcrypt_ep11misc device drive, which is required to handle key generate and key derive (e.g. secure key to protected key) correctly - Add missing secure/has_secure sysfs files for the case where it is not possible to figure where a system has been booted from. Existing user space relies on that these files are always present - Fix DCSS block device driver list corruption, caused by incorrect error handling - Convert virt_to_pfn() and pfn_to_virt() from defines to static inline functions to enforce type checking - Cleanups, improvements, and minor fixes to the kernel mapping setup - Fix various virtual vs physical address confusions - Move pfault code to separate file, since it has nothing to do with regular fault handling - Move s390 documentation to Documentation/arch/ like it has been done for other architectures already - Add HAVE_FUNCTION_GRAPH_RETVAL support - Factor out the s390_hypfs filesystem and add a new config option for it. The filesystem is deprecated and as soon as all users are gone it can be removed some time in the not so near future - Remove support for old CEX2 and CEX3 crypto cards from zcrypt device driver - Add support for user-defined certificates: receive user-defined certificates with a diagnose call and provide them via 'cert_store' keyring to user space - Couple of other small fixes and improvements all over the place * tag 's390-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (66 commits) s390/pci: use builtin_misc_device macro to simplify the code s390/vfio-ap: make sure nib is shared KVM: s390: export kvm_s390_pv*_is_protected functions s390/uv: export uv_pin_shared for direct usage s390/vfio-ap: check for TAPQ response codes 0x35 and 0x36 s390/vfio-ap: handle queue state change in progress on reset s390/vfio-ap: use work struct to verify queue reset s390/vfio-ap: store entire AP queue status word with the queue object s390/vfio-ap: remove upper limit on wait for queue reset to complete s390/vfio-ap: allow deconfigured queue to be passed through to a guest s390/vfio-ap: wait for response code 05 to clear on queue reset s390/vfio-ap: clean up irq resources if possible s390/vfio-ap: no need to check the 'E' and 'I' bits in APQSW after TAPQ s390/ipl: refactor deprecated strncpy s390/ipl: fix virtual vs physical address confusion s390/zcrypt_ep11misc: support API ordinal 6 with empty pin-blob s390/paes: fix PKEY_TYPE_EP11_AES handling for secure keyblobs s390/pkey: fix PKEY_TYPE_EP11_AES handling for sysfs attributes s390/pkey: fix PKEY_TYPE_EP11_AES handling in PKEY_VERIFYKEY2 IOCTL s390/pkey: fix PKEY_TYPE_EP11_AES handling in PKEY_KBLOB2PROTK[23] ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull misc x86 cleanups from Ingo Molnar: "The following commit deserves special mention: 22dc02f8 Revert "sched/fair: Move unused stub functions to header" This is in x86/cleanups, because the revert is a re-application of a number of cleanups that got removed inadvertedly" [ This also effectively undoes the amd_check_microcode() microcode declaration change I had done in my microcode loader merge in commit 42a7f6e3 ("Merge tag 'x86_microcode_for_v6.6_rc1' [...]"). I picked the declaration change by Arnd from this branch instead, which put it in <asm/processor.h> instead of <asm/microcode.h> like I had done in my merge resolution - Linus ] * tag 'x86-cleanups-2023-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/platform/uv: Refactor code using deprecated strncpy() interface to use strscpy() x86/hpet: Refactor code using deprecated strncpy() interface to use strscpy() x86/platform/uv: Refactor code using deprecated strcpy()/strncpy() interfaces to use strscpy() x86/qspinlock-paravirt: Fix missing-prototype warning x86/paravirt: Silence unused native_pv_lock_init() function warning x86/alternative: Add a __alt_reloc_selftest() prototype x86/purgatory: Include header for warn() declaration x86/asm: Avoid unneeded __div64_32 function definition Revert "sched/fair: Move unused stub functions to header" x86/apic: Hide unused safe_smp_processor_id() on 32-bit UP x86/cpu: Fix amd_check_microcode() declaration
-
- 28 Aug, 2023 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler updates from Ingo Molnar: - The biggest change is introduction of a new iteration of the SCHED_FAIR interactivity code: the EEVDF ("Earliest Eligible Virtual Deadline First") scheduler EEVDF too is a virtual-time scheduler, with two parameters (weight and relative deadline), compared to CFS that had weight only. It completely reworks the base scheduler: placement, preemption, picking -- everything LWN.net, as usual, has a terrific writeup about EEVDF: https://lwn.net/Articles/925371/ Preemption (both tick and wakeup) is driven by testing against a fresh pick. Because the tree is now effectively an interval tree, and the selection is no longer the 'leftmost' task, over-scheduling is less of a problem. A lot of the CFS heuristics are removed or replaced by more natural latency-space parameters & constructs In terms of expected performance regressions: we will and can fix everything where a 'good' workload misbehaves with the new scheduler, but EEVDF inevitably changes workload scheduling in a binary fashion, hopefully for the better in the overwhelming majority of cases, but in some cases it won't, especially in adversarial loads that got lucky with the previous code, such as some variants of hackbench. We are trying hard to err on the side of fixing all performance regressions, but we expect some inevitable post-release iterations of that process - Improve load-balancing on hybrid x86 systems: enable cluster scheduling (again) - Improve & fix bandwidth-scheduling on nohz systems - Improve bandwidth-throttling - Use lock guards to simplify and de-goto-ify control flow - Misc improvements, cleanups and fixes * tag 'sched-core-2023-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (43 commits) sched/eevdf/doc: Modify the documented knob to base_slice_ns as well sched/eevdf: Curb wakeup-preemption sched: Simplify sched_core_cpu_{starting,deactivate}() sched: Simplify try_steal_cookie() sched: Simplify sched_tick_remote() sched: Simplify sched_exec() sched: Simplify ttwu() sched: Simplify wake_up_if_idle() sched: Simplify: migrate_swap_stop() sched: Simplify sysctl_sched_uclamp_handler() sched: Simplify get_nohz_timer_target() sched/rt: sysctl_sched_rr_timeslice show default timeslice after reset sched/rt: Fix sysctl_sched_rr_timeslice intial value sched/fair: Block nohz tick_stop when cfs bandwidth in use sched, cgroup: Restore meaning to hierarchical_quota MAINTAINERS: Add Peter explicitly to the psi section sched/psi: Select KERNFS as needed sched/topology: Align group flags when removing degenerate domain sched/fair: remove util_est boosting sched/fair: Propagate enqueue flags into place_entity() ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf event updates from Ingo Molnar: - AMD IBS improvements - Intel PMU driver updates - Extend core perf facilities & the ARM PMU driver to better handle ARM big.LITTLE events - Micro-optimize software events and the ring-buffer code - Misc cleanups & fixes * tag 'perf-core-2023-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/uncore: Remove unnecessary ?: operator around pcibios_err_to_errno() call perf/x86/intel: Add Crestmont PMU x86/cpu: Update Hybrids x86/cpu: Fix Crestmont uarch x86/cpu: Fix Gracemont uarch perf: Remove unused extern declaration arch_perf_get_page_size() perf: Remove unused PERF_PMU_CAP_HETEROGENEOUS_CPUS capability arm_pmu: Remove unused PERF_PMU_CAP_HETEROGENEOUS_CPUS capability perf/x86: Remove unused PERF_PMU_CAP_HETEROGENEOUS_CPUS capability arm_pmu: Add PERF_PMU_CAP_EXTENDED_HW_TYPE capability perf/x86/ibs: Set mem_lvl_num, mem_remote and mem_hops for data_src perf/mem: Add PERF_MEM_LVLNUM_NA to PERF_MEM_NA perf/mem: Introduce PERF_MEM_LVLNUM_UNC perf/ring_buffer: Use local_try_cmpxchg in __perf_output_begin locking/arch: Avoid variable shadowing in local_try_cmpxchg() perf/core: Use local64_try_cmpxchg in perf_swevent_set_period perf/x86: Use local64_try_cmpxchg perf/amd: Prevent grouping of IBS events
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking update from Ingo Molnar: "Simplify the locking self-tests via using the new <linux/cleanup.h> facilities for lock guards" * tag 'locking-core-2023-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: lockdep/selftests: Use SBRM APIs for wait context tests
-
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efiLinus Torvalds authored
Pull EFI updates from Ard Biesheuvel: "This primarily covers some cleanup work on the EFI runtime wrappers, which are shared between all EFI architectures except Itanium, and which provide some level of isolation to prevent faults occurring in the firmware code (which runs at the same privilege level as the kernel) from bringing down the system. Beyond that, there is a fix that did not make it into v6.5, and some doc fixes and dead code cleanup. - one bugfix for x86 mixed mode that did not make it into v6.5 - first pass of cleanup for the EFI runtime wrappers - some cosmetic touchups" * tag 'efi-next-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: x86/efistub: Fix PCI ROM preservation in mixed mode efi/runtime-wrappers: Clean up white space and add __init annotation acpi/prmt: Use EFI runtime sandbox to invoke PRM handlers efi/runtime-wrappers: Don't duplicate setup/teardown code efi/runtime-wrappers: Remove duplicated macro for service returning void efi/runtime-wrapper: Move workqueue manipulation out of line efi/runtime-wrappers: Use type safe encapsulation of call arguments efi/riscv: Move EFI runtime call setup/teardown helpers out of line efi/arm64: Move EFI runtime call setup/teardown helpers out of line efi/riscv: libstub: Fix comment about absolute relocation efi: memmap: Remove kernel-doc warnings efi: Remove unused extern declaration efi_lookup_mapped_addr()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 microcode loading updates from Borislav Petkov: "The first, cleanup part of the microcode loader reorg tglx has been working on. The other part wasn't fully ready in time so it will follow on later. This part makes the loader core code as it is practically enabled on pretty much every baremetal machine so there's no need to have the Kconfig items. In addition, there are cleanups which prepare for future feature enablement" * tag 'x86_microcode_for_v6.6_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/microcode: Remove remaining references to CONFIG_MICROCODE_AMD x86/microcode/intel: Remove pointless mutex x86/microcode/intel: Remove debug code x86/microcode: Move core specific defines to local header x86/microcode/intel: Rename get_datasize() since its used externally x86/microcode: Make reload_early_microcode() static x86/microcode: Include vendor headers into microcode.h x86/microcode/intel: Move microcode functions out of cpu/intel.c x86/microcode: Hide the config knob x86/mm: Remove unused microcode.h include x86/microcode: Remove microcode_mutex x86/microcode/AMD: Rip out static buffers
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 SEV updates from Borislav Petkov: - Handle the case where the beginning virtual address of the address range whose SEV encryption status needs to change, is not page aligned so that callers which round up the number of pages to be decrypted, would mark a trailing page as decrypted and thus cause corruption during live migration. - Return an error from the #VC handler on AMD SEV-* guests when the debug registers swapping is enabled as a DR7 access should not happen then - that register is guest/host switched. * tag 'x86_sev_for_v6.6_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sev: Make enc_dec_hypercall() accept a size instead of npages x86/sev: Do not handle #VC for DR7 read/write
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 RAS updates from Borislav Petkov: - Add a quirk for AMD Zen machines where Instruction Fetch unit poison consumption MCEs are not delivered synchronously but still within the same context, which can lead to erroneously increased error severity and unneeded kernel panics - Do not log errors caught by polling shared MCA banks as they materialize as duplicated error records otherwise * tag 'ras_core_for_v6.6_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/MCE: Always save CS register on AMD Zen IF Poison errors x86/mce: Prevent duplicate error records
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull misc x86 updates from Borislav Petkov: - Add PCI device IDs for a new AMD family 0x1a CPUs and use them in the respective drivers - Update HPE Superdome Flex maintainers list * tag 'x86_misc_for_v6.6_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/uv: Update HPE Superdome Flex Maintainers EDAC/amd64: Add support for AMD family 1Ah models 00h-1Fh and 40h-4Fh hwmon: (k10temp) Add thermal support for AMD Family 1Ah-based models x86/amd_nb: Add PCI IDs for AMD Family 1Ah-based models
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 boot updates from Borislav Petkov: "Avoid the baremetal decompressor code when booting on an EFI machine. This is mandated by the current tightening of EFI executables requirements when used in a secure boot scenario. More specifically, an EFI executable cannot have a single section with RWX permissions, which conflicts with the in-place kernel decompression that is done today. Instead, the things required by the booting kernel image are done in the EFI stub now. Work by Ard Biesheuvel" * tag 'x86_boot_for_v6.6_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) x86/efistub: Avoid legacy decompressor when doing EFI boot x86/efistub: Perform SNP feature test while running in the firmware efi/libstub: Add limit argument to efi_random_alloc() x86/decompressor: Factor out kernel decompression and relocation x86/decompressor: Move global symbol references to C code decompress: Use 8 byte alignment x86/efistub: Prefer EFI memory attributes protocol over DXE services x86/efistub: Perform 4/5 level paging switch from the stub x86/decompressor: Merge trampoline cleanup with switching code x86/decompressor: Pass pgtable address to trampoline directly x86/decompressor: Only call the trampoline when changing paging levels x86/decompressor: Call trampoline directly from C code x86/decompressor: Avoid the need for a stack in the 32-bit trampoline x86/decompressor: Use standard calling convention for trampoline x86/decompressor: Call trampoline as a normal function x86/decompressor: Assign paging related global variables earlier x86/decompressor: Store boot_params pointer in callee save register x86/efistub: Clear BSS in EFI handover protocol entrypoint x86/decompressor: Avoid magic offsets for EFI handover entrypoint x86/efistub: Simplify and clean up handover entry code ...
-
