- 23 Sep, 2022 1 commit
-
-
Jens Axboe authored
Merge branch 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-6.1/block Pull MD updates and fixes from Song: "1. Various raid5 fix and clean up, by Logan Gunthorpe and David Sloan. 2. Raid10 performance optimization, by Yu Kuai." * 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md: md: Fix spelling mistake in comments of r5l_log md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d md/raid10: convert resync_lock to use seqlock md/raid10: fix improper BUG_ON() in raise_barrier() md/raid10: prevent unnecessary calls to wake_up() in fast path md/raid10: don't modify 'nr_waitng' in wait_barrier() for the case nowait md/raid10: factor out code from wait_barrier() to stop_waiting_barrier() md: Remove extra mddev_get() in md_seq_start() md/raid5: Remove unnecessary bio_put() in raid5_read_one_chunk() md/raid5: Ensure stripe_fill happens on non-read IO with journal md/raid5: Don't read ->active_stripes if it's not needed md/raid5: Cleanup prototype of raid5_get_active_stripe() md/raid5: Drop extern on function declarations in raid5.h md/raid5: Refactor raid5_get_active_stripe() md: Replace snprintf with scnprintf md/raid10: fix compile warning md/raid5: Fix spelling mistakes in comments
-
- 22 Sep, 2022 23 commits
-
-
Zhou nan authored
Fix spelling of dones't in comments. Signed-off-by:
Zhou nan <zhounan@nfschina.com> Signed-off-by:
Song Liu <song@kernel.org>
-
Logan Gunthorpe authored
A complicated deadlock exists when using the journal and an elevated group_thrtead_cnt. It was found with loop devices, but its not clear whether it can be seen with real disks. The deadlock can occur simply by writing data with an fio script. When the deadlock occurs, multiple threads will hang in different ways: 1) The group threads will hang in the blk-wbt code with bios waiting to be submitted to the block layer: io_schedule+0x70/0xb0 rq_qos_wait+0x153/0x210 wbt_wait+0x115/0x1b0 io_schedule+0x70/0xb0 rq_qos_wait+0x153/0x210 wbt_wait+0x115/0x1b0 __rq_qos_throttle+0x38/0x60 blk_mq_submit_bio+0x589/0xcd0 wbt_wait+0x115/0x1b0 __rq_qos_throttle+0x38/0x60 blk_mq_submit_bio+0x589/0xcd0 __submit_bio+0xe6/0x100 submit_bio_noacct_nocheck+0x42e/0x470 submit_bio_noacct+0x4c2/0xbb0 ops_run_io+0x46b/0x1a30 handle_stripe+0xcd3/0x36b0 handle_active_stripes.constprop.0+0x6f6/0xa60 raid5_do_work+0x177/0x330 Or: io_schedule+0x70/0xb0 rq_qos_wait+0x153/0x210 wbt_wait+0x115/0x1b0 __rq_qos_throttle+0x38/0x60 blk_mq_submit_bio+0x589/0xcd0 __submit_bio+0xe6/0x100 submit_bio_noacct_nocheck+0x42e/0x470 submit_bio_noacct+0x4c2/0xbb0 flush_deferred_bios+0x136/0x170 raid5_do_work+0x262/0x330 2) The r5l_reclaim thread will hang in the same way, submitting a bio to the block layer: io_schedule+0x70/0xb0 rq_qos_wait+0x153/0x210 wbt_wait+0x115/0x1b0 __rq_qos_throttle+0x38/0x60 blk_mq_submit_bio+0x589/0xcd0 __submit_bio+0xe6/0x100 submit_bio_noacct_nocheck+0x42e/0x470 submit_bio_noacct+0x4c2/0xbb0 submit_bio+0x3f/0xf0 md_super_write+0x12f/0x1b0 md_update_sb.part.0+0x7c6/0xff0 md_update_sb+0x30/0x60 r5l_do_reclaim+0x4f9/0x5e0 r5l_reclaim_thread+0x69/0x30b However, before hanging, the MD_SB_CHANGE_PENDING flag will be set for sb_flags in r5l_write_super_and_discard_space(). This flag will never be cleared because the submit_bio() call never returns. 3) Due to the MD_SB_CHANGE_PENDING flag being set, handle_stripe() will do no processing on any pending stripes and re-set STRIPE_HANDLE. This will cause the raid5d thread to enter an infinite loop, constantly trying to handle the same stripes stuck in the queue. The raid5d thread has a blk_plug that holds a number of bios that are also stuck waiting seeing the thread is in a loop that never schedules. These bios have been accounted for by blk-wbt thus preventing the other threads above from continuing when they try to submit bios. --Deadlock. To fix this, add the same wait_event() that is used in raid5_do_work() to raid5d() such that if MD_SB_CHANGE_PENDING is set, the thread will schedule and wait until the flag is cleared. The schedule action will flush the plug which will allow the r5l_reclaim thread to continue, thus preventing the deadlock. However, md_check_recovery() calls can also clear MD_SB_CHANGE_PENDING from the same thread and can thus deadlock if the thread is put to sleep. So avoid waiting if md_check_recovery() is being called in the loop. It's not clear when the deadlock was introduced, but the similar wait_event() call in raid5_do_work() was added in 2017 by this commit: 16d997b7 ("md/raid5: simplfy delaying of writes while metadata is updated.") Link: https://lore.kernel.org/r/7f3b87b6-b52a-f737-51d7-a4eec5c44112@deltatee.comSigned-off-by:Logan Gunthorpe <logang@deltatee.com> Signed-off-by:
-
Song Liu authored
This patchset tries to avoid that two locks are held unconditionally in hot path. Test environment: Architecture: aarch64 Huawei KUNPENG 920 x86 Intel(R) Xeon(R) Platinum 8380 Raid10 initialize: mdadm --create /dev/md0 --level 10 --bitmap none --raid-devices 4 \ /dev/nvme0n1 /dev/nvme1n1 /dev/nvme2n1 /dev/nvme3n1 Test cmd: (task set -c 0-15) fio -name=0 -ioengine=libaio -direct=1 -\ group_reporting=1 -randseed=2022 -rwmixread=70 -refill_buffers \ -filename=/dev/md0 -numjobs=16 -runtime=60s -bs=4k -iodepth=256 \ -rw=randread Test result: aarch64: before this patchset: 3.2 GiB/s bind node before this patchset: 6.9 Gib/s after this patchset: 7.9 Gib/s bind node after this patchset: 8.0 Gib/s x86:(bind node is not tested yet) before this patchset: 7.0 GiB/s after this patchset : 9.3 GiB/s Please noted that in the test machine, memory access latency is very bad across nodes compare to local node in aarch64, which is why bandwidth while bind node is much better. -
Yu Kuai authored
Currently, wait_barrier() will hold 'resync_lock' to read 'conf->barrier', and io can't be dispatched until 'barrier' is dropped. Since holding the 'barrier' is not common, convert 'resync_lock' to use seqlock so that holding lock can be avoided in fast path. Signed-off-by:
Yu Kuai <yukuai3@huawei.com> Reviewed-and-Tested-by:
-
Yu Kuai authored
'conf->barrier' is protected by 'conf->resync_lock', reading 'conf->barrier' without holding the lock is wrong. Signed-off-by:
Guoqing Jiang <guoqing.jiang@linux.dev> Signed-off-by:
-
Yu Kuai authored
Currently, wake_up() is called unconditionally in fast path such as raid10_make_request(), which will cause lock contention under high concurrency: raid10_make_request wake_up __wake_up_common_lock spin_lock_irqsave Improve performance by only call wake_up() if waitqueue is not empty in allow_barrier() and raid10_make_request(). Signed-off-by:
-
Yu Kuai authored
For the case nowait in wait_barrier(), there is no point to increase nr_waiting and then decrease it. Signed-off-by:
-
Yu Kuai authored
Currently the nasty condition in wait_barrier() is hard to read. This patch factors out the condition into a function. There are no functional changes. Signed-off-by:
Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-by:
-
Logan Gunthorpe authored
A regression is seen where mddev devices stay permanently after they are stopped due to an elevated reference count. This was tracked down to an extra mddev_get() in md_seq_start(). It only happened rarely because most of the time the md_seq_start() is called with a zero offset. The path with an extra mddev_get() only happens when it starts with a non-zero offset. The commit noted below changed an mddev_get() to check its success but inadvertently left the original call in. Remove the extra call. Fixes: 12a6caf2 ("md: only delete entries from all_mddevs when the disk is freed") Signed-off-by:
Christoph Hellwig <hch@lst.de> Acked-by:
-
David Sloan authored
When running chunk-sized reads on disks with badblocks duplicate bio free/puts are observed: ============================================================================= BUG bio-200 (Not tainted): Object already free ----------------------------------------------------------------------------- Allocated in mempool_alloc_slab+0x17/0x20 age=3 cpu=2 pid=7504 __slab_alloc.constprop.0+0x5a/0xb0 kmem_cache_alloc+0x31e/0x330 mempool_alloc_slab+0x17/0x20 mempool_alloc+0x100/0x2b0 bio_alloc_bioset+0x181/0x460 do_mpage_readpage+0x776/0xd00 mpage_readahead+0x166/0x320 blkdev_readahead+0x15/0x20 read_pages+0x13f/0x5f0 page_cache_ra_unbounded+0x18d/0x220 force_page_cache_ra+0x181/0x1c0 page_cache_sync_ra+0x65/0xb0 filemap_get_pages+0x1df/0xaf0 filemap_read+0x1e1/0x700 blkdev_read_iter+0x1e5/0x330 vfs_read+0x42a/0x570 Freed in mempool_free_slab+0x17/0x20 age=3 cpu=2 pid=7504 kmem_cache_free+0x46d/0x490 mempool_free_slab+0x17/0x20 mempool_free+0x66/0x190 bio_free+0x78/0x90 bio_put+0x100/0x1a0 raid5_make_request+0x2259/0x2450 md_handle_request+0x402/0x600 md_submit_bio+0xd9/0x120 __submit_bio+0x11f/0x1b0 submit_bio_noacct_nocheck+0x204/0x480 submit_bio_noacct+0x32e/0xc70 submit_bio+0x98/0x1a0 mpage_readahead+0x250/0x320 blkdev_readahead+0x15/0x20 read_pages+0x13f/0x5f0 page_cache_ra_unbounded+0x18d/0x220 Slab 0xffffea000481b600 objects=21 used=0 fp=0xffff8881206d8940 flags=0x17ffffc0010201(locked|slab|head|node=0|zone=2|lastcpupid=0x1fffff) CPU: 0 PID: 34525 Comm: kworker/u24:2 Not tainted 6.0.0-rc2-localyes-265166-gf11c5343fa3f #143 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Workqueue: raid5wq raid5_do_work Call Trace: <TASK> dump_stack_lvl+0x5a/0x78 dump_stack+0x10/0x16 print_trailer+0x158/0x165 object_err+0x35/0x50 free_debug_processing.cold+0xb7/0xbe __slab_free+0x1ae/0x330 kmem_cache_free+0x46d/0x490 mempool_free_slab+0x17/0x20 mempool_free+0x66/0x190 bio_free+0x78/0x90 bio_put+0x100/0x1a0 mpage_end_io+0x36/0x150 bio_endio+0x2fd/0x360 md_end_io_acct+0x7e/0x90 bio_endio+0x2fd/0x360 handle_failed_stripe+0x960/0xb80 handle_stripe+0x1348/0x3760 handle_active_stripes.constprop.0+0x72a/0xaf0 raid5_do_work+0x177/0x330 process_one_work+0x616/0xb20 worker_thread+0x2bd/0x6f0 kthread+0x179/0x1b0 ret_from_fork+0x22/0x30 </TASK> The double free is caused by an unnecessary bio_put() in the if(is_badblock(...)) error path in raid5_read_one_chunk(). The error path was moved ahead of bio_alloc_clone() in c82aa1b7 ("md/raid5: move checking badblock before clone bio in raid5_read_one_chunk"). The previous code checked and freed align_bio which required a bio_put. After the move that is no longer needed as raid_bio is returned to the control of the common io path which performs its own endio resulting in a double free on bad device blocks. Fixes: c82aa1b7 ("md/raid5: move checking badblock before clone bio in raid5_read_one_chunk") Signed-off-by:David Sloan <david.sloan@eideticom.com> Signed-off-by:
-
Logan Gunthorpe authored
When doing degrade/recover tests using the journal a kernel BUG is hit at drivers/md/raid5.c:4381 in handle_parity_checks5(): BUG_ON(!test_bit(R5_UPTODATE, &dev->flags)); This was found to occur because handle_stripe_fill() was skipped for stripes in the journal due to a condition in that function. Thus blocks were not fetched and R5_UPTODATE was not set when the code reached handle_parity_checks5(). To fix this, don't skip handle_stripe_fill() unless the stripe is for read. Fixes: 07e83364 ("md/r5cache: shift complex rmw from read path to write path") Link: https://lore.kernel.org/linux-raid/e05c4239-41a9-d2f7-3cfa-4aa9d2cea8c1@deltatee.com/Suggested-by:
-
Logan Gunthorpe authored
The atomic_read() is not needed in many cases so only do the read after the first checks are done. Suggested-by:
Christoph Hellwig <hch@infradead.org> Signed-off-by:
-
Logan Gunthorpe authored
Drop the three bools in the prototype of raid5_get_active_stripe() and replace them with a flags parameter. At the same time, drop the distinction with __raid5_get_active_stripe(). Suggested-by:
-
Logan Gunthorpe authored
externs should not be used in function declarations, so clean those up. Signed-off-by:
-
Logan Gunthorpe authored
Refactor raid5_get_active_stripe() without the gotos with an explicit infinite loop and some additional nesting. Suggested-by:
-
Saurabh Sengar authored
Current code produces a warning as shown below when total characters in the constituent block device names plus the slashes exceeds 200. snprintf() returns the number of characters generated from the given input, which could cause the expression “200 – len” to wrap around to a large positive number. Fix this by using scnprintf() instead, which returns the actual number of characters written into the buffer. [ 1513.267938] ------------[ cut here ]------------ [ 1513.267943] WARNING: CPU: 15 PID: 37247 at <snip>/lib/vsprintf.c:2509 vsnprintf+0x2c8/0x510 [ 1513.267944] Modules linked in: <snip> [ 1513.267969] CPU: 15 PID: 37247 Comm: mdadm Not tainted 5.4.0-1085-azure #90~18.04.1-Ubuntu [ 1513.267969] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 05/09/2022 [ 1513.267971] RIP: 0010:vsnprintf+0x2c8/0x510 <-snip-> [ 1513.267982] Call Trace: [ 1513.267986] snprintf+0x45/0x70 [ 1513.267990] ? disk_name+0x71/0xa0 [ 1513.267993] dump_zones+0x114/0x240 [raid0] [ 1513.267996] ? _cond_resched+0x19/0x40 [ 1513.267998] raid0_run+0x19e/0x270 [raid0] [ 1513.268000] md_run+0x5e0/0xc50 [ 1513.268003] ? security_capable+0x3f/0x60 [ 1513.268005] do_md_run+0x19/0x110 [ 1513.268006] md_ioctl+0x195e/0x1f90 [ 1513.268007] blkdev_ioctl+0x91f/0x9f0 [ 1513.268010] block_ioctl+0x3d/0x50 [ 1513.268012] do_vfs_ioctl+0xa9/0x640 [ 1513.268014] ? __fput+0x162/0x260 [ 1513.268016] ksys_ioctl+0x75/0x80 [ 1513.268017] __x64_sys_ioctl+0x1a/0x20 [ 1513.268019] do_syscall_64+0x5e/0x200 [ 1513.268021] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 76603884 ("md/raid0: replace printk() with pr_*()") Reviewed-by:
Michael Kelley <mikelley@microsoft.com> Acked-by:
Saurabh Sengar <ssengar@linux.microsoft.com> Signed-off-by:
-
Guoqing Jiang authored
With W=1, compiler complains. drivers/md/raid10.c:1983: warning: bad line: Signed-off-by:
-
XU pengfei authored
Fix spelling of 'waitting' in comments. Signed-off-by:
XU pengfei <xupengfei@nfschina.com> Signed-off-by:
-
Li Jinlin authored
Since blk-ioprio handing was converted from a rqos policy to a direct call, RQ_QOS_IOPRIO is not used anymore, just delete it. Signed-off-by:
Li Jinlin <lijinlin3@huawei.com> Reviewed-by:
Jan Kara <jack@suse.cz> Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Reviewed-by:
Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20220916023241.32926-1-lijinlin3@huawei.comSigned-off-by:
Jens Axboe <axboe@kernel.dk>
-
Liu Shixin authored
Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code. Signed-off-by:
Liu Shixin <liushixin2@huawei.com> Link: https://lore.kernel.org/r/20220915023424.3198940-1-liushixin2@huawei.comSigned-off-by:
-
Wolfram Sang authored
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by:
Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Acked-by:
Geoff Levand <geoff@infradead.org> Link: https://lore.kernel.org/r/20220818205958.6552-1-wsa+renesas@sang-engineering.comSigned-off-by:
-
Gaosheng Cui authored
All implementations of req->collision, _req_may_be_done and drbd_fail_pending_reads have been removed, so remove the comments in receive_DataReply() that provide no useful information. Signed-off-by:
Gaosheng Cui <cuigaosheng1@huawei.com> Acked-by:
-
Gaosheng Cui authored
The _req_may_be_done() has been removed by commit 6870ca6d ("drbd: factor out master_bio completion and drbd_request destruction paths"), so remove the orphan declaration. Signed-off-by:
-
- 21 Sep, 2022 13 commits
-
-
Yu Kuai authored
Our test found a problem that wbt inflight counter is negative, which will cause io hang(noted that this problem doesn't exist in mainline): t1: device create t2: issue io add_disk blk_register_queue wbt_enable_default wbt_init rq_qos_add // wb_normal is still 0 /* * in mainline, disk can't be opened before * bdev_add(), however, in old kernels, disk * can be opened before blk_register_queue(). */ blkdev_issue_flush // disk size is 0, however, it's not checked submit_bio_wait submit_bio blk_mq_submit_bio rq_qos_throttle wbt_wait bio_to_wbt_flags rwb_enabled // wb_normal is 0, inflight is not increased wbt_queue_depth_changed(&rwb->rqos); wbt_update_limits // wb_normal is initialized rq_qos_track wbt_track rq->wbt_flags |= bio_to_wbt_flags(rwb, bio); // wb_normal is not 0，wbt_flags will be set t3: io completion blk_mq_free_request rq_qos_done wbt_done wbt_is_tracked // return true __wbt_done wbt_rqw_done atomic_dec_return(&rqw->inflight); // inflight is decreased commit 8235b5c1 ("block: call bdev_add later in device_add_disk") can avoid this problem, however it's better to fix this problem in wbt: 1) Lower kernel can't backport this patch due to lots of refactor. 2) Root cause is that wbt call rq_qos_add() before wb_normal is initialized. Fixes: e34cbd30 ("blk-wbt: add general throttling mechanism") Cc: <stable@vger.kernel.org> Signed-off-by: -
Christoph Hellwig authored
Given that rnbd_srv_sess_dev already has an open_flags member, there is no need for the rnbd_dev indirection as a simple block_device pointer works just as well. Signed-off-by:
Jack Wang <jinpu.wang@ionos.com> Link: https://lore.kernel.org/r/20220909131509.3263924-5-hch@lst.deSigned-off-by:
-
Christoph Hellwig authored
These can be trivially open coded in the callers. Signed-off-by:
-
Christoph Hellwig authored
Fold rnbd_endio into the only caller. Signed-off-by:
-
Christoph Hellwig authored
Remove all the wrappers and just get the information directly from the block device, or where no such helpers exist the request_queue. Signed-off-by:
-
Bart Van Assche authored
The documentation of the blk_eh_timer_return enumeration values does not reflect correctly how e.g. the SCSI core uses these values. Fix the documentation. Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com> Fixes: 88b0cfad ("block: document the blk_eh_timer_return values") Signed-off-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by:
Damien Le Moal <damien.lemoal@opensource.wdc.com> Link: https://lore.kernel.org/r/20220920200626.3422296-1-bvanassche@acm.orgSigned-off-by:
-
Stefan Haberland authored
Add a function to check if a device is accessible. This makes mostly sense for copy pair secondary devices but it will work for all devices. The sysfs attribute ping is a write only attribute and will issue a NOP CCW to the device. In case of success it will return zero. If the device is not accessible it will return an error code. Signed-off-by:
Stefan Haberland <sth@linux.ibm.com> Reviewed-by:
Jan Hoeppner <hoeppner@linux.ibm.com> Link: https://lore.kernel.org/r/20220920192616.808070-8-sth@linux.ibm.comSigned-off-by:
-
Stefan Haberland authored
Suppress generic command reject messages and dump of sense data for Peer-To-Peer-Remote-Copy (PPRC) secondary errors. If IO is issued on a PPRC secondary device, a specific error message is printed instead. Signed-off-by:
-
Stefan Haberland authored
The newly defined ioctl BIODASDCOPYPAIRSWAP takes a structure that specifies a copy pair that should be swapped. It will call the device discipline function to perform the swap operation. The structure looks as followed: struct dasd_copypair_swap_data_t { char primary[20]; char secondary[20]; __u8 reserved[64]; }; where primary is the old primary device that will be replaced by the secondary device. The old primary will become a secondary device afterwards. Signed-off-by: -
Stefan Haberland authored
In case of errors or misbehaviour of the primary device a controlled failover to one of the configured secondary devices needs to be performed. The swap processing stops I/O on the primary device, all requests are re-queued to the blocklayer queue, the entries in the copy relation are swapped and finally the link to the blockdevice is moved from primary to secondary dasd device. After this, the secondary becomes the new primary device and I/O is restarted on that device. Signed-off-by:
-
Stefan Haberland authored
A copy relation that is configured on the storage server side needs to be enabled separately in the device driver. A sysfs interface is created that allows userspace tooling to control such setup. The following sysfs entries are added to store and read copy relation information: copy_pair - Add/Delete a copy pair relation to the DASD device driver - Query all previously added copy pair relations copy_role - Query the copy pair role of the device To add a copy pair to the DASD device driver it has to be specified through the sysfs attribute copy_pair. Only one secondary device can be specified at a time together with the primary device. Both, secondary and primary can be used equally to define the copy pair. The secondary devices have to be offline when adding the copy relation. The primary device needs to be specified first followed by the comma separated secondary device. Read from the copy_pair attribute to get the current setup and write "clear" to the attribute to delete any existing setup. Example: $ echo 0.0.9700,0.0.9740 > /sys/bus/ccw/devices/0.0.9700/copy_pair $ cat /sys/bus/ccw/devices/0.0.9700/copy_pair 0.0.9700,0.0.9740 During device online processing the required data will be read from the storage server and the information will be compared to the setup requested through the copy_pair attribute. The registration of the primary and secondary device will be handled accordingly. A blockdevice is only allocated for copy relation primary devices. To query the copy role of a device read from the copy_role sysfs attribute. Possible values are primary, secondary, and none. Example: $ cat /sys/bus/ccw/devices/0.0.9700/copy_role primary Signed-off-by: -
Stefan Haberland authored
Add function to query the Peer-to-Peer-Remote-Copy (PPRC) state of a device by reading the related structure through a read subsystem data call. Signed-off-by:
-
Stefan Haberland authored
Put block allocation into a separate function to put some copy pair logic in it in a later patch. Signed-off-by:
-
- 20 Sep, 2022 3 commits
-
-
Li zeming authored
The key pointer is void and hence does not need an explicit cast. Signed-off-by:
Li zeming <zeming@nfschina.com> Link: https://lore.kernel.org/r/20220919012825.2936-1-zeming@nfschina.comSigned-off-by:
-
Christoph Hellwig authored
PSI accounting is now done by the VM code, where it should have been since the beginning. Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Link: https://lore.kernel.org/r/20220915094200.139713-6-hch@lst.deSigned-off-by:
-
Christoph Hellwig authored
erofs uses an additional address space for compressed data read from disk in addition to the one directly associated with the inode. Reading into the lower address space is open coded using add_to_page_cache_lru instead of using the filemap.c helper for page allocation micro-optimizations, which means it is not covered by the MM PSI annotations for ->read_folio and ->readahead, so add manual ones instead. Signed-off-by:
Gao Xiang <hsiangkao@linux.alibaba.com> Link: https://lore.kernel.org/r/20220915094200.139713-5-hch@lst.deSigned-off-by:
-
