- 10 Jan, 2017 31 commits
-
-
Johan Hovold authored
BugLink: http://bugs.launchpad.net/bugs/1650604 commit 0e1614ac upstream. Make sure to drop the reference to the parent device taken by class_find_device() after "unexporting" any children when deregistering a PWM chip. Fixes: 0733424c ("pwm: Unexport children before chip removal") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Tim Gardner <tim.gardner@canonical.com> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Brian Norris authored
BugLink: http://bugs.launchpad.net/bugs/1650604 commit fcd2042e upstream. SSIDs aren't guaranteed to be 0-terminated. Let's cap the max length when we print them out. This can be easily noticed by connecting to a network with a 32-octet SSID: [ 3903.502925] mwifiex_pcie 0000:01:00.0: info: trying to associate to '0123456789abcdef0123456789abcdef <uninitialized mem>' bssid xx:xx:xx:xx:xx:xx Fixes: 5e6e3a92 ("wireless: mwifiex: initial commit for Marvell mwifiex driver") Signed-off-by:
Brian Norris <briannorris@chromium.org> Acked-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Johannes Thumshirn authored
BugLink: http://bugs.launchpad.net/bugs/1650604 commit e42010d8 upstream. Per PCIe spec r3.0, sec 2.3.1.1, the Read Completion Boundary (RCB) determines the naturally aligned address boundaries on which a Read Request may be serviced with multiple Completions: - For a Root Complex, RCB is 64 bytes or 128 bytes This value is reported in the Link Control Register Note: Bridges and Endpoints may implement a corresponding command bit which may be set by system software to indicate the RCB value for the Root Complex, allowing the Bridge/Endpoint to optimize its behavior when the Root Complex’s RCB is 128 bytes. - For all other system elements, RCB is 128 bytes Per sec 7.8.7, if a Root Port only supports a 64-byte RCB, the RCB of all downstream devices must be clear, indicating an RCB of 64 bytes. If the Root Port supports a 128-byte RCB, we may optionally set the RCB of downstream devices so they know they can generate larger Completions. Some BIOSes supply an _HPX that tells us to set RCB, even though the Root Port doesn't have RCB set, which may lead to Malformed TLP errors if the Endpoint generates completions larger than the Root Port can handle. The IBM x3850 X6 with BIOS version -[A8E120CUS-1.30]- 08/22/2016 supplies such an _HPX and a Mellanox MT27500 ConnectX-3 device fails to initialize: mlx4_core 0000:41:00.0: command 0xfff timed out (go bit not cleared) mlx4_core 0000:41:00.0: device is going to be reset mlx4_core 0000:41:00.0: Failed to obtain HW semaphore, aborting mlx4_core 0000:41:00.0: Fail to reset HCA ------------[ cut here ]------------ kernel BUG at drivers/net/ethernet/mellanox/mlx4/catas.c:193! After 6cd33649 ("PCI: Add pci_configure_device() during enumeration") and 7a1562d4 ("PCI: Apply _HPX Link Control settings to all devices with a link"), we apply _HPX settings to *all* devices, not just those hot-added after boot. Before 7a1562d4, we didn't touch the Mellanox RCB, and the device worked. After 7a1562d4, we set its RCB to 128, and it failed. Set the RCB to 128 iff the Root Port supports a 128-byte RCB. Otherwise, set RCB to 64 bytes. This effectively ignores what _HPX tells us about RCB. Note that this change only affects _HPX handling. If we have no _HPX, this does nothing with RCB. [bhelgaas: changelog, clear RCB if not set for Root Port] Fixes: 6cd33649 ("PCI: Add pci_configure_device() during enumeration") Fixes: 7a1562d4 ("PCI: Apply _HPX Link Control settings to all devices with a link") Link: https://bugzilla.kernel.org/show_bug.cgi?id=187781Tested-by:
Frank Danapfel <fdanapfe@redhat.com> Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by:
Myron Stowe <myron.stowe@redhat.com> Signed-off-by:
-
Johannes Thumshirn authored
BugLink: http://bugs.launchpad.net/bugs/1650604 commit e784930b upstream. Export pcie_find_root_port() so we can use it outside of PCIe-AER error injection. Signed-off-by:
-
Ding Tianhong authored
BugLink: http://bugs.launchpad.net/bugs/1650604 commit bedc1969 upstream. Carrying out the following steps results in a softlockup in the RCU callback-offload (rcuo) kthreads: 1. Connect to ixgbevf, and set the speed to 10Gb/s. 2. Use ifconfig to bring the nic up and down repeatedly. [ 317.005148] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready [ 368.106005] BUG: soft lockup - CPU#1 stuck for 22s! [rcuos/1:15] [ 368.106005] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 368.106005] task: ffff88057dd8a220 ti: ffff88057dd9c000 task.ti: ffff88057dd9c000 [ 368.106005] RIP: 0010:[<ffffffff81579e04>] [<ffffffff81579e04>] fib_table_lookup+0x14/0x390 [ 368.106005] RSP: 0018:ffff88061fc83ce8 EFLAGS: 00000286 [ 368.106005] RAX: 0000000000000001 RBX: 00000000020155c0 RCX: 0000000000000001 [ 368.106005] RDX: ffff88061fc83d50 RSI: ffff88061fc83d70 RDI: ffff880036d11a00 [ 368.106005] RBP: ffff88061fc83d08 R08: 0000000000000001 R09: 0000000000000000 [ 368.106005] R10: ffff880036d11a00 R11: ffffffff819e0900 R12: ffff88061fc83c58 [ 368.106005] R13: ffffffff816154dd R14: ffff88061fc83d08 R15: 00000000020155c0 [ 368.106005] FS: 0000000000000000(0000) GS:ffff88061fc80000(0000) knlGS:0000000000000000 [ 368.106005] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 368.106005] CR2: 00007f8c2aee9c40 CR3: 000000057b222000 CR4: 00000000000407e0 [ 368.106005] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 368.106005] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 368.106005] Stack: [ 368.106005] 00000000010000c0 ffff88057b766000 ffff8802e380b000 ffff88057af03e00 [ 368.106005] ffff88061fc83dc0 ffffffff815349a6 ffff88061fc83d40 ffffffff814ee146 [ 368.106005] ffff8802e380af00 00000000e380af00 ffffffff819e0900 020155c0010000c0 [ 368.106005] Call Trace: [ 368.106005] <IRQ> [ 368.106005] [ 368.106005] [<ffffffff815349a6>] ip_route_input_noref+0x516/0xbd0 [ 368.106005] [<ffffffff814ee146>] ? skb_release_data+0xd6/0x110 [ 368.106005] [<ffffffff814ee20a>] ? kfree_skb+0x3a/0xa0 [ 368.106005] [<ffffffff8153698f>] ip_rcv_finish+0x29f/0x350 [ 368.106005] [<ffffffff81537034>] ip_rcv+0x234/0x380 [ 368.106005] [<ffffffff814fd656>] __netif_receive_skb_core+0x676/0x870 [ 368.106005] [<ffffffff814fd868>] __netif_receive_skb+0x18/0x60 [ 368.106005] [<ffffffff814fe4de>] process_backlog+0xae/0x180 [ 368.106005] [<ffffffff814fdcb2>] net_rx_action+0x152/0x240 [ 368.106005] [<ffffffff81077b3f>] __do_softirq+0xef/0x280 [ 368.106005] [<ffffffff8161619c>] call_softirq+0x1c/0x30 [ 368.106005] <EOI> [ 368.106005] [ 368.106005] [<ffffffff81015d95>] do_softirq+0x65/0xa0 [ 368.106005] [<ffffffff81077174>] local_bh_enable+0x94/0xa0 [ 368.106005] [<ffffffff81114922>] rcu_nocb_kthread+0x232/0x370 [ 368.106005] [<ffffffff81098250>] ? wake_up_bit+0x30/0x30 [ 368.106005] [<ffffffff811146f0>] ? rcu_start_gp+0x40/0x40 [ 368.106005] [<ffffffff8109728f>] kthread+0xcf/0xe0 [ 368.106005] [<ffffffff810971c0>] ? kthread_create_on_node+0x140/0x140 [ 368.106005] [<ffffffff816147d8>] ret_from_fork+0x58/0x90 [ 368.106005] [<ffffffff810971c0>] ? kthread_create_on_node+0x140/0x140 ==================================cut here============================== It turns out that the rcuos callback-offload kthread is busy processing a very large quantity of RCU callbacks, and it is not reliquishing the CPU while doing so. This commit therefore adds an cond_resched_rcu_qs() within the loop to allow other tasks to run. Signed-off-by:
Ding Tianhong <dingtianhong@huawei.com> [ paulmck: Substituted cond_resched_rcu_qs for cond_resched. ] Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Dhaval Giani <dhaval.giani@oracle.com> Signed-off-by:
-
Andy Lutomirski authored
BugLink: http://bugs.launchpad.net/bugs/1650604 commit fc0e81b2 upstream. On the 80486 DX, it seems that some exceptions may leave garbage in the high bits of CS. This causes sporadic failures in which early_fixup_exception() refuses to fix up an exception. As far as I can tell, this has been buggy for a long time, but the problem seems to have been exacerbated by commits: 1e02ce4c ("x86: Store a per-cpu shadow copy of CR4") e1bfc11c ("x86/init: Fix cr4_init_shadow() on CR4-less machines") This appears to have broken for as long as we've had early exception handling. [ This backport should apply to kernels from 3.4 - 4.5. ] Fixes: 4c5023a3 ("x86-32: Handle exception table entries during early boot") Cc: H. Peter Anvin <hpa@zytor.com> Reported-by:
Matthew Whitehead <tedheadster@gmail.com> Signed-off-by:
Andy Lutomirski <luto@kernel.org> Signed-off-by:
-
Dmitry Vyukov authored
BugLink: http://bugs.launchpad.net/bugs/1650604 commit 045d599a upstream. kasan_global struct is part of compiler/runtime ABI. gcc revision 241983 has added a new field to kasan_global struct. Update kernel definition of kasan_global struct to include the new field. Without this patch KASAN is broken with gcc 7. Link: http://lkml.kernel.org/r/1479219743-28682-1-git-send-email-dvyukov@google.comSigned-off-by:
Dmitry Vyukov <dvyukov@google.com> Acked-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Takashi Iwai authored
BugLink: http://bugs.launchpad.net/bugs/1650604 commit 529e71e1 upstream. The zram hot removal code calls idr_remove() even when zram_remove() returns an error (typically -EBUSY). This results in a leftover at the device release, eventually leading to a crash when the module is reloaded. As described in the bug report below, the following procedure would cause an Oops with zram: - provision three zram devices via modprobe zram num_devices=3 - configure a size for each device + echo "1G" > /sys/block/$zram_name/disksize - mkfs and mount zram0 only - attempt to hot remove all three devices + echo 2 > /sys/class/zram-control/hot_remove + echo 1 > /sys/class/zram-control/hot_remove + echo 0 > /sys/class/zram-control/hot_remove - zram0 removal fails with EBUSY, as expected - unmount zram0 - try zram0 hot remove again + echo 0 > /sys/class/zram-control/hot_remove - fails with ENODEV (unexpected) - unload zram kernel module + completes successfully - zram0 device node still exists - attempt to mount /dev/zram0 + mount command is killed + following BUG is encountered BUG: unable to handle kernel paging request at ffffffffa0002ba0 IP: get_disk+0x16/0x50 Oops: 0000 [#1] SMP CPU: 0 PID: 252 Comm: mount Not tainted 4.9.0-rc6 #176 Call Trace: exact_lock+0xc/0x20 kobj_lookup+0xdc/0x160 get_gendisk+0x2f/0x110 __blkdev_get+0x10c/0x3c0 blkdev_get+0x19d/0x2e0 blkdev_open+0x56/0x70 do_dentry_open.isra.19+0x1ff/0x310 vfs_open+0x43/0x60 path_openat+0x2c9/0xf30 do_filp_open+0x79/0xd0 do_sys_open+0x114/0x1e0 SyS_open+0x19/0x20 entry_SYSCALL_64_fastpath+0x13/0x94 This patch adds the proper error check in hot_remove_store() not to call idr_remove() unconditionally. Fixes: 17ec4cd9 ("zram: don't call idr_remove() from zram_remove()") Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=1010970 Link: http://lkml.kernel.org/r/20161121132140.12683-1-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de> Reviewed-by:
David Disseldorp <ddiss@suse.de> Reported-by:
Minchan Kim <minchan@kernel.org> Acked-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by:
-
Vineet Gupta authored
BugLink: http://bugs.launchpad.net/bugs/1650604 commit 3c7c7a2f upstream. Apparenty this is coming in the way of gcc fix which inhibits the usage of LP_COUNT as a gpr. Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: http://bugs.launchpad.net/bugs/1650601Signed-off-by:
-
Suganath Prabu S authored
BugLink: http://bugs.launchpad.net/bugs/1650601 commit 7ff723ad upstream. While issuing any ATA passthrough command to firmware the driver will block the device. But it will unblock the device only if the I/O completes through the ISR path. If a controller reset occurs before command completion the device will remain in blocked state. Make sure we unblock the device following a controller reset if an ATA passthrough command was queued. [mkp: clarified patch description] Fixes: ac6c2a93bd07 ("mpt3sas: Fix for SATA drive in blocked state, after diag reset") Signed-off-by:
Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Tomas Winkler authored
BugLink: http://bugs.launchpad.net/bugs/1650601 commit 2d4d5481 upstream. Correct errno on client disconnection is -ENODEV not -EBUSY Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
-
Tomas Winkler authored
BugLink: http://bugs.launchpad.net/bugs/1650601 This is fix of the backported patch only, it places KBL DIDs on correct place to easy on backporting of further DIDs. Fixes: 5c99f32c ('mei: me: add kaby point device ids') Signed-off-by:
-
Tomas Winkler authored
BugLink: http://bugs.launchpad.net/bugs/1650601 commit 8c57cac1 upstream. Sunrise Point PCH with SPS Firmware doesn't expose working MEI interface, we need to quirk it out. The SPS Firmware is identifiable only on the first PCI function of the device. Tested-by:
Sujith Pandel <sujith_pandel@dell.com> Signed-off-by:
-
Michel Dänzer authored
BugLink: http://bugs.launchpad.net/bugs/1650601 NOTE: This patch only applies to 4.5.y or older kernels. With newer kernels, this problem cannot happen because the driver now uses drm_crtc_vblank_on/off instead of drm_vblank_pre/post_modeset[0]. I consider this patch safer for older kernels than backporting the API change, because drm_crtc_vblank_on/off had various issues in older kernels, and I'm not sure all fixes for those have been backported to all stable branches where this patch could be applied. --------------------- Fixes the vblank interrupt being disabled when it should be on, which can cause at least the following symptoms: * Hangs when running 'xset dpms force off' in a GNOME session with gnome-shell using DRI2. * RandR 1.4 slave outputs freezing with garbage displayed using xf86-video-ati 7.8.0 or newer. [0] See upstream commit: commit 777e3cbc Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Jan 21 11:08:57 2016 +0100 drm/radeon: Switch to drm_vblank_on/off Reported-and-Tested-by:
Max Staudt <mstaudt@suse.de> Reviewed-by:
Daniel Vetter <daniel@ffwll.ch> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
-
Andrey Ryabinin authored
BugLink: http://bugs.launchpad.net/bugs/1650601 commit f5527fff upstream. This fixes CVE-2016-8650. If mpi_powm() is given a zero exponent, it wants to immediately return either 1 or 0, depending on the modulus. However, if the result was initalised with zero limb space, no limbs space is allocated and a NULL-pointer exception ensues. Fix this by allocating a minimal amount of limb space for the result when the 0-exponent case when the result is 1 and not touching the limb space when the result is 0. This affects the use of RSA keys and X.509 certificates that carry them. BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff8138ce5d>] mpi_powm+0x32/0x7e6 PGD 0 Oops: 0002 [#1] SMP Modules linked in: CPU: 3 PID: 3014 Comm: keyctl Not tainted 4.9.0-rc6-fscache+ #278 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 task: ffff8804011944c0 task.stack: ffff880401294000 RIP: 0010:[<ffffffff8138ce5d>] [<ffffffff8138ce5d>] mpi_powm+0x32/0x7e6 RSP: 0018:ffff880401297ad8 EFLAGS: 00010212 RAX: 0000000000000000 RBX: ffff88040868bec0 RCX: ffff88040868bba0 RDX: ffff88040868b260 RSI: ffff88040868bec0 RDI: ffff88040868bee0 RBP: ffff880401297ba8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000047 R11: ffffffff8183b210 R12: 0000000000000000 R13: ffff8804087c7600 R14: 000000000000001f R15: ffff880401297c50 FS: 00007f7a7918c700(0000) GS:ffff88041fb80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000401250000 CR4: 00000000001406e0 Stack: ffff88040868bec0 0000000000000020 ffff880401297b00 ffffffff81376cd4 0000000000000100 ffff880401297b10 ffffffff81376d12 ffff880401297b30 ffffffff81376f37 0000000000000100 0000000000000000 ffff880401297ba8 Call Trace: [<ffffffff81376cd4>] ? __sg_page_iter_next+0x43/0x66 [<ffffffff81376d12>] ? sg_miter_get_next_page+0x1b/0x5d [<ffffffff81376f37>] ? sg_miter_next+0x17/0xbd [<ffffffff8138ba3a>] ? mpi_read_raw_from_sgl+0xf2/0x146 [<ffffffff8132a95c>] rsa_verify+0x9d/0xee [<ffffffff8132acca>] ? pkcs1pad_sg_set_buf+0x2e/0xbb [<ffffffff8132af40>] pkcs1pad_verify+0xc0/0xe1 [<ffffffff8133cb5e>] public_key_verify_signature+0x1b0/0x228 [<ffffffff8133d974>] x509_check_for_self_signed+0xa1/0xc4 [<ffffffff8133cdde>] x509_cert_parse+0x167/0x1a1 [<ffffffff8133d609>] x509_key_preparse+0x21/0x1a1 [<ffffffff8133c3d7>] asymmetric_key_preparse+0x34/0x61 [<ffffffff812fc9f3>] key_create_or_update+0x145/0x399 [<ffffffff812fe227>] SyS_add_key+0x154/0x19e [<ffffffff81001c2b>] do_syscall_64+0x80/0x191 [<ffffffff816825e4>] entry_SYSCALL64_slow_path+0x25/0x25 Code: 56 41 55 41 54 53 48 81 ec a8 00 00 00 44 8b 71 04 8b 42 04 4c 8b 67 18 45 85 f6 89 45 80 0f 84 b4 06 00 00 85 c0 75 2f 41 ff ce <49> c7 04 24 01 00 00 00 b0 01 75 0b 48 8b 41 18 48 83 38 01 0f RIP [<ffffffff8138ce5d>] mpi_powm+0x32/0x7e6 RSP <ffff880401297ad8> CR2: 0000000000000000 ---[ end trace d82015255d4a5d8d ]--- Basically, this is a backport of a libgcrypt patch: http://git.gnupg.org/cgi-bin/gitweb.cgi?p=libgcrypt.git;a=patch;h=6e1adb05d290aeeb1c230c763970695f4a538526 Fixes: cdec9cb5 ("crypto: GnuPG based MPI lib - source files (part 1)") Signed-off-by:
David Howells <dhowells@redhat.com> cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com> cc: linux-ima-devel@lists.sourceforge.net Signed-off-by:
James Morris <james.l.morris@oracle.com> Signed-off-by:
-
John David Anglin authored
BugLink: http://bugs.launchpad.net/bugs/1650601 commit 5035b230 upstream. This is the second issue I noticed in reviewing the parisc TLB code. The fic instruction may use either the instruction or data TLB in flushing the instruction cache. Thus, on machines with a split TLB, we should also flush the data TLB after setting up the temporary alias registers. Although this has no functional impact, I changed the pdtlb and pitlb instructions to consistently use the index register %r0. These instructions do not support integer displacements. Tested on rp3440 and c8000. Signed-off-by:
John David Anglin <dave.anglin@bell.net> Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
John David Anglin authored
BugLink: http://bugs.launchpad.net/bugs/1650601 commit c0452fb9 upstream. We are still troubled by occasional random segmentation faults and memory memory corruption on SMP machines. The causes quite a few package builds to fail on the Debian buildd machines for parisc. When gcc-6 failed to build three times in a row, I looked again at the TLB related code. I found a couple of issues. This is the first. In general, we need to ensure page table updates and corresponding TLB purges are atomic. The attached patch fixes an instance in pci-dma.c where the page table update was not guarded by the TLB lock. Tested on rp3440 and c8000. So far, no further random segmentation faults have been observed. Signed-off-by:
-
John David Anglin authored
BugLink: http://bugs.launchpad.net/bugs/1650601 commit 741dc7bf upstream. Helge reported to me the following startup crash: [ 0.000000] Linux version 4.8.0-1-parisc64-smp (debian-kernel@lists.debian.org) (gcc version 5.4.1 20161019 (GCC) ) #1 SMP Debian 4.8.7-1 (2016-11-13) [ 0.000000] The 64-bit Kernel has started... [ 0.000000] Kernel default page size is 4 KB. Huge pages enabled with 1 MB physical and 2 MB virtual size. [ 0.000000] Determining PDC firmware type: System Map. [ 0.000000] model 9000/785/J5000 [ 0.000000] Total Memory: 2048 MB [ 0.000000] Memory: 2018528K/2097152K available (9272K kernel code, 3053K rwdata, 1319K rodata, 1024K init, 840K bss, 78624K reserved, 0K cma-reserved) [ 0.000000] virtual kernel memory layout: [ 0.000000] vmalloc : 0x0000000000008000 - 0x000000003f000000 (1007 MB) [ 0.000000] memory : 0x0000000040000000 - 0x00000000c0000000 (2048 MB) [ 0.000000] .init : 0x0000000040100000 - 0x0000000040200000 (1024 kB) [ 0.000000] .data : 0x0000000040b0e000 - 0x0000000040f533e0 (4372 kB) [ 0.000000] .text : 0x0000000040200000 - 0x0000000040b0e000 (9272 kB) [ 0.768910] Brought up 1 CPUs [ 0.992465] NET: Registered protocol family 16 [ 2.429981] Releasing cpu 1 now, hpa=fffffffffffa2000 [ 2.635751] CPU(s): 2 out of 2 PA8500 (PCX-W) at 440.000000 MHz online [ 2.726692] Setting cache flush threshold to 1024 kB [ 2.729932] Not-handled unaligned insn 0x43ffff80 [ 2.798114] Setting TLB flush threshold to 140 kB [ 2.928039] Unaligned handler failed, ret = -1 [ 3.000419] _______________________________ [ 3.000419] < Your System ate a SPARC! Gah! > [ 3.000419] ------------------------------- [ 3.000419] \ ^__^ [ 3.000419] (__)\ )\/\ [ 3.000419] U ||----w | [ 3.000419] || || [ 9.340055] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.8.0-1-parisc64-smp #1 Debian 4.8.7-1 [ 9.448082] task: 00000000bfd48060 task.stack: 00000000bfd50000 [ 9.528040] [ 10.760029] IASQ: 0000000000000000 0000000000000000 IAOQ: 000000004025d154 000000004025d158 [ 10.868052] IIR: 43ffff80 ISR: 0000000000340000 IOR: 000001ff54150960 [ 10.960029] CPU: 1 CR30: 00000000bfd50000 CR31: 0000000011111111 [ 11.052057] ORIG_R28: 000000004021e3b4 [ 11.100045] IAOQ[0]: irq_exit+0x94/0x120 [ 11.152062] IAOQ[1]: irq_exit+0x98/0x120 [ 11.208031] RP(r2): irq_exit+0xb8/0x120 [ 11.256074] Backtrace: [ 11.288067] [<00000000402cd944>] cpu_startup_entry+0x1e4/0x598 [ 11.368058] [<0000000040109528>] smp_callin+0x2c0/0x2f0 [ 11.436308] [<00000000402b53fc>] update_curr+0x18c/0x2d0 [ 11.508055] [<00000000402b73b8>] dequeue_entity+0x2c0/0x1030 [ 11.584040] [<00000000402b3cc0>] set_next_entity+0x80/0xd30 [ 11.660069] [<00000000402c1594>] pick_next_task_fair+0x614/0x720 [ 11.740085] [<000000004020dd34>] __schedule+0x394/0xa60 [ 11.808054] [<000000004020e488>] schedule+0x88/0x118 [ 11.876039] [<0000000040283d3c>] rescuer_thread+0x4d4/0x5b0 [ 11.948090] [<000000004028fc4c>] kthread+0x1ec/0x248 [ 12.016053] [<0000000040205020>] end_fault_vector+0x20/0xc0 [ 12.092239] [<00000000402050c0>] _switch_to_ret+0x0/0xf40 [ 12.164044] [ 12.184036] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.8.0-1-parisc64-smp #1 Debian 4.8.7-1 [ 12.244040] Backtrace: [ 12.244040] [<000000004021c480>] show_stack+0x68/0x80 [ 12.244040] [<00000000406f332c>] dump_stack+0xec/0x168 [ 12.244040] [<000000004021c74c>] die_if_kernel+0x25c/0x430 [ 12.244040] [<000000004022d320>] handle_unaligned+0xb48/0xb50 [ 12.244040] [ 12.632066] ---[ end trace 9ca05a7215c7bbb2 ]--- [ 12.692036] Kernel panic - not syncing: Attempted to kill the idle task! We have the insn 0x43ffff80 in IIR but from IAOQ we should have: 4025d150: 0f f3 20 df ldd,s r19(r31),r31 4025d154: 0f 9f 00 9c ldw r31(ret0),ret0 4025d158: bf 80 20 58 cmpb,*<> r0,ret0,4025d18c <irq_exit+0xcc> Cpu0 has just completed running parisc_setup_cache_timing: [ 2.429981] Releasing cpu 1 now, hpa=fffffffffffa2000 [ 2.635751] CPU(s): 2 out of 2 PA8500 (PCX-W) at 440.000000 MHz online [ 2.726692] Setting cache flush threshold to 1024 kB [ 2.729932] Not-handled unaligned insn 0x43ffff80 [ 2.798114] Setting TLB flush threshold to 140 kB [ 2.928039] Unaligned handler failed, ret = -1 From the backtrace, cpu1 is in smp_callin: void __init smp_callin(void) { int slave_id = cpu_now_booting; smp_cpu_init(slave_id); preempt_disable(); flush_cache_all_local(); /* start with known state */ flush_tlb_all_local(NULL); local_irq_enable(); /* Interrupts have been off until now */ cpu_startup_entry(CPUHP_AP_ONLINE_IDLE); So, it has just flushed its caches and the TLB. It would seem either the flushes in parisc_setup_cache_timing or smp_callin have corrupted kernel memory. The attached patch reworks parisc_setup_cache_timing to remove the races in setting the cache and TLB flush thresholds. It also corrects the number of bytes flushed in the TLB calculation. The patch flushes the cache and TLB on cpu0 before starting the secondary processors so that they are started from a known state. Tested with a few reboots on c8000. Signed-off-by:
-
Arnd Bergmann authored
BugLink: http://bugs.launchpad.net/bugs/1650601 commit d55b352b upstream. A correct bugfix introduced a harmless warning that shows up with gcc-7: fs/nfs/callback.c: In function 'nfs_callback_up': fs/nfs/callback.c:214:14: error: array subscript is outside array bounds [-Werror=array-bounds] What happens here is that the 'minorversion == 0' check tells the compiler that we assume minorversion can be something other than 0, but when CONFIG_NFS_V4_1 is disabled that would be invalid and result in an out-of-bounds access. The added check for IS_ENABLED(CONFIG_NFS_V4_1) tells gcc that this really can't happen, which makes the code slightly smaller and also avoids the warning. The bugfix that introduced the warning is marked for stable backports, we want this one backported to the same releases. Fixes: 98b0f80c ("NFSv4.x: Fix a refcount leak in nfs_callback_up_net") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Johannes Berg authored
BugLink: http://bugs.launchpad.net/bugs/1650601 commit 9853a55e upstream. It's possible to make scanning consume almost arbitrary amounts of memory, e.g. by sending beacon frames with random BSSIDs at high rates while somebody is scanning. Limit the number of BSS table entries we're willing to cache to 1000, limiting maximum memory usage to maybe 4-5MB, but lower in practice - that would be the case for having both full-sized beacon and probe response frames for each entry; this seems not possible in practice, so a limit of 1000 entries will likely be closer to 0.5 MB. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Chris Metcalf authored
BugLink: http://bugs.launchpad.net/bugs/1650601 commit e658a6f1 upstream. For large values of "mult" and long uptimes, the intermediate result of "cycles * mult" can overflow 64 bits. For example, the tile platform calls clocksource_cyc2ns with a 1.2 GHz clock; we have mult = 853, and after 208.5 days, we overflow 64 bits. Since clocksource_cyc2ns() is intended to be used for relative cycle counts, not absolute cycle counts, performance is more importance than accepting a wider range of cycle values. So, just use mult_frac() directly in tile's sched_clock(). Commit 4cecf6d4 ("sched, x86: Avoid unnecessary overflow in sched_clock") by Salman Qazi results in essentially the same generated code for x86 as this change does for tile. In fact, a follow-on change by Salman introduced mult_frac() and switched to using it, so the C code was largely identical at that point too. Peter Zijlstra then added mul_u64_u32_shr() and switched x86 to use it. This is, in principle, better; by optimizing the 64x64->64 multiplies to be 32x32->64 multiplies we can potentially save some time. However, the compiler piplines the 64x64->64 multiplies pretty well, and the conditional branch in the generic mul_u64_u32_shr() causes some bubbles in execution, with the result that it's pretty much a wash. If tilegx provided its own implementation of mul_u64_u32_shr() without the conditional branch, we could potentially save 3 cycles, but that seems like small gain for a fair amount of additional build scaffolding; no other platform currently provides a mul_u64_u32_shr() override, and tile doesn't currently have an <asm/div64.h> header to put the override in. Additionally, gcc currently has an optimization bug that prevents it from recognizing the opportunity to use a 32x32->64 multiply, and so the result would be no better than the existing mult_frac() until such time as the compiler is fixed. For now, just using mult_frac() seems like the right answer. Signed-off-by:
Chris Metcalf <cmetcalf@mellanox.com> Signed-off-by:
-
Andrey Grodzovsky authored
BugLink: http://bugs.launchpad.net/bugs/1650601 commit 18f6084a upstream. This is a work around for a bug with LSI Fusion MPT SAS2 when perfoming secure erase. Due to the very long time the operation takes, commands issued during the erase will time out and will trigger execution of the abort hook. Even though the abort hook is called for the specific command which timed out, this leads to entire device halt (scsi_state terminated) and premature termination of the secure erase. Set device state to busy while ATA passthrough commands are in progress. [mkp: hand applied to 4.9/scsi-fixes, tweaked patch description] Signed-off-by:
Andrey Grodzovsky <andrey2805@gmail.com> Acked-by:
Sreekanth Reddy <Sreekanth.Reddy@broadcom.com> Cc: <linux-scsi@vger.kernel.org> Cc: Sathya Prakash <sathya.prakash@broadcom.com> Cc: Chaitra P B <chaitra.basappa@broadcom.com> Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> Cc: Sreekanth Reddy <Sreekanth.Reddy@broadcom.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by:
-
Petr Vandrovec authored
BugLink: http://bugs.launchpad.net/bugs/1650601 commit 2ce9d227 upstream. Some code (all error handling) submits CDBs that are allocated on the stack. This breaks with CB/CBI code that tries to create URB directly from SCSI command buffer - which happens to be in vmalloced memory with vmalloced kernel stacks. Let's make copy of the command in usb_stor_CB_transport. Signed-off-by:
Petr Vandrovec <petr@vandrovec.name> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Doug Brown authored
BugLink: http://bugs.launchpad.net/bugs/1650601 commit 9bfef729 upstream. This patch adds support for the TI CC3200 LaunchPad board, which uses a custom USB vendor ID and product ID. Channel A is used for JTAG, and channel B is used for a UART. Signed-off-by:
Doug Brown <doug@schmorgal.com> Signed-off-by:
-
Paul Jakma authored
BugLink: http://bugs.launchpad.net/bugs/1650601 commit 2ab13292 upstream. The BRIM Brothers Zone DPMX is a bicycle powermeter. This ID is for the USB serial interface in its charging dock for the control pods, via which some settings for the pods can be modified. Signed-off-by:
Paul Jakma <paul@jakma.org> Cc: Barry Redmond <barry@brimbrothers.com> Signed-off-by:
-
Peter Chen authored
BugLink: http://bugs.launchpad.net/bugs/1650601 commit a5d906bb upstream. This can fix below dump when the lock is accessed at host mode due to it is not initialized. [ 46.119638] INFO: trying to register non-static key. [ 46.124643] the code is fine but needs lockdep annotation. [ 46.130144] turning off the locking correctness validator. [ 46.135659] CPU: 0 PID: 690 Comm: cat Not tainted 4.9.0-rc3-00079-g4b75f1d #1210 [ 46.143075] Hardware name: Freescale i.MX6 SoloX (Device Tree) [ 46.148923] Backtrace: [ 46.151448] [<c010c460>] (dump_backtrace) from [<c010c658>] (show_stack+0x18/0x1c) [ 46.159038] r7:edf52000 [ 46.161412] r6:60000193 [ 46.163967] r5:00000000 [ 46.165035] r4:c0e25c2c [ 46.169109] [<c010c640>] (show_stack) from [<c03f58a4>] (dump_stack+0xb4/0xe8) [ 46.176362] [<c03f57f0>] (dump_stack) from [<c016d690>] (register_lock_class+0x4fc/0x56c) [ 46.184554] r10:c0e25d24 [ 46.187014] r9:edf53e70 [ 46.189569] r8:c1642444 [ 46.190637] r7:ee9da024 [ 46.193191] r6:00000000 [ 46.194258] r5:00000000 [ 46.196812] r4:00000000 [ 46.199185] r3:00000001 [ 46.203259] [<c016d194>] (register_lock_class) from [<c0171294>] (__lock_acquire+0x80/0x10f0) [ 46.211797] r10:c0e25d24 [ 46.214257] r9:edf53e70 [ 46.216813] r8:ee9da024 [ 46.217880] r7:c1642444 [ 46.220435] r6:edcd1800 [ 46.221502] r5:60000193 [ 46.224057] r4:00000000 [ 46.227953] [<c0171214>] (__lock_acquire) from [<c01726c0>] (lock_acquire+0x74/0x94) [ 46.235710] r10:00000001 [ 46.238169] r9:edf53e70 [ 46.240723] r8:edf53f80 [ 46.241790] r7:00000001 [ 46.244344] r6:00000001 [ 46.245412] r5:60000193 [ 46.247966] r4:00000000 [ 46.251866] [<c017264c>] (lock_acquire) from [<c096c8fc>] (_raw_spin_lock_irqsave+0x40/0x54) [ 46.260319] r7:ee1c6a00 [ 46.262691] r6:c062a570 [ 46.265247] r5:20000113 [ 46.266314] r4:ee9da014 [ 46.270393] [<c096c8bc>] (_raw_spin_lock_irqsave) from [<c062a570>] (ci_port_test_show+0x2c/0x70) [ 46.279280] r6:eebd2000 [ 46.281652] r5:ee9da010 [ 46.284207] r4:ee9da014 [ 46.286810] [<c062a544>] (ci_port_test_show) from [<c0248d04>] (seq_read+0x1ac/0x4f8) [ 46.294655] r9:edf53e70 [ 46.297028] r8:edf53f80 [ 46.299583] r7:ee1c6a00 [ 46.300650] r6:00000001 [ 46.303205] r5:00000000 [ 46.304273] r4:eebd2000 [ 46.306850] [<c0248b58>] (seq_read) from [<c039e864>] (full_proxy_read+0x54/0x6c) [ 46.314348] r10:00000000 [ 46.316808] r9:c0a6ad30 [ 46.319363] r8:edf53f80 [ 46.320430] r7:00020000 [ 46.322986] r6:b6de3000 [ 46.324053] r5:ee1c6a00 [ 46.326607] r4:c0248b58 [ 46.330505] [<c039e810>] (full_proxy_read) from [<c021ec98>] (__vfs_read+0x34/0x118) [ 46.338262] r9:edf52000 [ 46.340635] r8:c0107fc4 [ 46.343190] r7:00020000 [ 46.344257] r6:edf53f80 [ 46.346812] r5:c039e810 [ 46.347879] r4:ee1c6a00 [ 46.350447] [<c021ec64>] (__vfs_read) from [<c021fbd0>] (vfs_read+0x8c/0x11c) [ 46.357597] r9:edf52000 [ 46.359969] r8:c0107fc4 [ 46.362524] r7:edf53f80 [ 46.363592] r6:b6de3000 [ 46.366147] r5:ee1c6a00 [ 46.367214] r4:00020000 [ 46.369782] [<c021fb44>] (vfs_read) from [<c0220a4c>] (SyS_read+0x4c/0xa8) [ 46.376672] r8:c0107fc4 [ 46.379045] r7:00020000 [ 46.381600] r6:b6de3000 [ 46.382667] r5:ee1c6a00 [ 46.385222] r4:ee1c6a00 [ 46.387817] [<c0220a00>] (SyS_read) from [<c0107e20>] (ret_fast_syscall+0x0/0x1c) [ 46.395314] r7:00000003 [ 46.397687] r6:b6de3000 [ 46.400243] r5:00020000 [ 46.401310] r4:00020000 Fixes: 26c696c6 ("USB: Chipidea: rename struct ci13xxx variables from udc to ci") Signed-off-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
-
Radim Krčmář authored
BugLink: http://bugs.launchpad.net/bugs/1650601 commit df492896 upstream. Split irqchip allows pic and ioapic routes to be used without them being created, which results in NULL access. Check for NULL and avoid it. (The setup is too racy for a nicer solutions.) Found by syzkaller: general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 3 PID: 11923 Comm: kworker/3:2 Not tainted 4.9.0-rc5+ #27 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: events irqfd_inject task: ffff88006a06c7c0 task.stack: ffff880068638000 RIP: 0010:[...] [...] __lock_acquire+0xb35/0x3380 kernel/locking/lockdep.c:3221 RSP: 0000:ffff88006863ea20 EFLAGS: 00010006 RAX: dffffc0000000000 RBX: dffffc0000000000 RCX: 0000000000000000 RDX: 0000000000000039 RSI: 0000000000000000 RDI: 1ffff1000d0c7d9e RBP: ffff88006863ef58 R08: 0000000000000001 R09: 0000000000000000 R10: 00000000000001c8 R11: 0000000000000000 R12: ffff88006a06c7c0 R13: 0000000000000001 R14: ffffffff8baab1a0 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff88006d100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004abdd0 CR3: 000000003e2f2000 CR4: 00000000000026e0 Stack: ffffffff894d0098 1ffff1000d0c7d56 ffff88006863ecd0 dffffc0000000000 ffff88006a06c7c0 0000000000000000 ffff88006863ecf8 0000000000000082 0000000000000000 ffffffff815dd7c1 ffffffff00000000 ffffffff00000000 Call Trace: [...] lock_acquire+0x2a2/0x790 kernel/locking/lockdep.c:3746 [...] __raw_spin_lock include/linux/spinlock_api_smp.h:144 [...] _raw_spin_lock+0x38/0x50 kernel/locking/spinlock.c:151 [...] spin_lock include/linux/spinlock.h:302 [...] kvm_ioapic_set_irq+0x4c/0x100 arch/x86/kvm/ioapic.c:379 [...] kvm_set_ioapic_irq+0x8f/0xc0 arch/x86/kvm/irq_comm.c:52 [...] kvm_set_irq+0x239/0x640 arch/x86/kvm/../../../virt/kvm/irqchip.c:101 [...] irqfd_inject+0xb4/0x150 arch/x86/kvm/../../../virt/kvm/eventfd.c:60 [...] process_one_work+0xb40/0x1ba0 kernel/workqueue.c:2096 [...] worker_thread+0x214/0x18a0 kernel/workqueue.c:2230 [...] kthread+0x328/0x3e0 kernel/kthread.c:209 [...] ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:433 Reported-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Ashok Raj authored
BugLink: http://bugs.launchpad.net/bugs/1650601 commit 1c387188 upstream. The VT-d specification (§8.3.3) says: ‘Virtual Functions’ of a ‘Physical Function’ are under the scope of the same remapping unit as the ‘Physical Function’. The BIOS is not required to list all the possible VFs in the scope tables, and arguably *shouldn't* make any attempt to do so, since there could be a huge number of them. This has been broken basically for ever — the VF is never going to match against a specific unit's scope, so it ends up being assigned to the INCLUDE_ALL IOMMU. Which was always actually correct by coincidence, but now we're looking at Root-Complex integrated devices with SR-IOV support it's going to start being wrong. Fix it to simply use pci_physfn() before doing the lookup for PCI devices. Signed-off-by:
Sainath Grandhi <sainath.grandhi@intel.com> Signed-off-by:
Ashok Raj <ashok.raj@intel.com> Signed-off-by:
David Woodhouse <dwmw2@infradead.org> Signed-off-by:
-
David Woodhouse authored
BugLink: http://bugs.launchpad.net/bugs/1650601 commit 91017044 upstream. Somehow I ended up with an off-by-three error in calculating the size of the PASID and PASID State tables, which triggers allocations failures as those tables unfortunately have to be physically contiguous. In fact, even the *correct* maximum size of 8MiB is problematic and is wont to lead to allocation failures. Since I have extracted a promise that this *will* be fixed in hardware, I'm happy to limit it on the current hardware to a maximum of 0x20000 PASIDs, which gives us 1MiB tables — still not ideal, but better than before. Reported by Mika Kuoppala <mika.kuoppala@linux.intel.com> and also by Xunlei Pang <xlpang@redhat.com> who submitted a simpler patch to fix only the allocation (and not the free) to the "correct" limit... which was still problematic. Signed-off-by:
-
Luis Henriques authored
Ignore: yes Signed-off-by:
-
- 05 Jan, 2017 2 commits
-
-
John Donnelly authored
Signed-off-by:John Donnelly <john.donnelly@canonical.com>
-
Dan Streetman authored
BugLink: http://bugs.launchpad.net/bugs/1651602 Change the required minimum number of MSI/MSIX interrupt vectors from 2 to 1; the admin queue and first I/O queue actually share vector 0. Also change the max_qid assignment, to equal the number of vectors. Since the number of vectors is set to the number of cpus, on a system with only 1 cpu the previous code is guaranteed to fail, since there will only be 1 vector configured. The max_qid, while 0-based, also needs to be 1 larger than the number of (1-based) vectors, due to the admin queue and first I/O queue sharing the first vector. So the 0-based max_qid is set to equal the 1-based number of vectors, resulting in the correct number of total queues, which is 1 more than the total number of vectors, due to the admin queue and first I/O queue sharing vector 0. Fixes: 96fce9e4 ("NVMe: only setup MSIX once") Signed-off-by:
Dan Streetman <dan.streetman@canonical.com> Acked-by:
Brad Figg <brad.figg@canonical.com> Acked-by:
-
- 02 Jan, 2017 1 commit
-
-
Luis Henriques authored
Ignore: yes Signed-off-by:
-
- 20 Dec, 2016 1 commit
-
-
Luis Henriques authored
Signed-off-by:
-
- 19 Dec, 2016 5 commits
-
-
Tim Gardner authored
BugLink: http://bugs.launchpad.net/bugs/1650123Signed-off-by:
-
Shrirang Bagul authored
BugLink: http://bugs.launchpad.net/bugs/1650123 Compatible strings are not available on ACPI based systems. This patch adds support to use DSDT information read from platform BIOS instead for probing st pressure sensors. Signed-off-by:
Shrirang Bagul <shrirang.bagul@canonical.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> (cherry picked from commit 9d317724) (source: git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git) Signed-off-by:
-
Tim Gardner authored
BugLink: http://bugs.launchpad.net/bugs/1650123 Add support to probe st_accel sensors on i2c bus using ACPI. Compatible strings are not avaialable on ACPI based systems. Signed-off-by:
-
Shrirang Bagul authored
BugLink: http://bugs.launchpad.net/bugs/1650123 Add support to match st sensors using information passed from ACPI DST tables. Signed-off-by:
-
Lorenzo Bianconi authored
BugLink: http://bugs.launchpad.net/bugs/1650189 Using realbits as i2c/spi read len, when that value is not byte aligned (e.g 12 bits), lead to skip msb part of out data registers. Fix this taking into account scan_type.shift in addition to scan_type.realbits as read length: read_len = DIV_ROUND_UP(realbits + shift, 8) This fix has been tested on 8, 12, 16, 24 bit sensors Fixes: e7385de5 ("iio:st_sensors: align on storagebits boundaries") Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@st.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
-
