Skip to content

L
linux
Switch branch/tag
  1. 24 May, 2018 6 commits
  3. 22 May, 2018 3 commits
    • Steve Wise's avatar
      RDMA/CMA: add rdma_iw_cm_id() and rdma_res_to_id() helpers · fbdb0a91
      Steve Wise authored 
      Add a helper function for iwarp drivers to be able to map an
rdma_cm_id to an iw_cm_id.  This is useful for dumping driver specific
NLDEV/RESTRACK connection state.

Add a helper to return the rdma_cm_id pointer from the rdma_restack
pointer.  This is needed for rdma drivers to map a res entry back to
the public rdma_cm_id struct.
Signed-off-by: default avatarSteve Wise <swise@opengridcomputing.com>
Signed-off-by: default avatarDoug Ledford <dledford@redhat.com>
      fbdb0a91
    • Steve Wise's avatar
      iw_cxgb4: always set iw_cm_id.provider_data · b06f2efd
      Steve Wise authored 
      In active side connections, the provider_data field is not
getting set.  This will be used in a subsequent patch to dump
state, so always set it.
Signed-off-by: default avatarSteve Wise <swise@opengridcomputing.com>
Signed-off-by: default avatarDoug Ledford <dledford@redhat.com>
      b06f2efd
    • Doug Ledford's avatar
      RDMA/ipoib: Update paths on CLIENT_REREG/SM_CHANGE events · fa9391db
      Doug Ledford authored 
      We do a light flush on CLIENT_REREG and SM_CHANGE events.  This goes
through and marks paths invalid. But we weren't always checking for this
validity when we needed to, and so we could keep using a path marked
invalid.  What's more, once we establish a path with a valid ah, we put
a pointer to the ah in the neigh struct directly, so even if we mark the
path as invalid, as long as the neigh has a direct pointer to the ah, it
keeps using the old, outdated ah.

To fix this we do several things.

1) Put the valid flag in the ah instead of the path struct, so when we
put the ah pointer directly in the neigh struct, we can easily check the
validity of the ah on send events.
2) Check the neigh->ah and neigh->ah->valid elements in the needed
places, and if we have an ah, but it's invalid, then invoke a refresh of
the ah.
3) Fix the various places that check for path, but didn't check for
path->valid (now path->ah && path->ah->valid).
Reported-by: default avatarEvgenii Smirnov <evgenii.smirnov@profitbricks.com>
Fixes: ee1e2c82 ("IPoIB: Refresh paths instead of flushing them on SM change events")
Signed-off-by: default avatarDoug Ledford <dledford@redhat.com>
      fa9391db
  5. 17 May, 2018 10 commits
  7. 16 May, 2018 4 commits
  9. 15 May, 2018 8 commits
  11. 09 May, 2018 9 commits
    • Brian Welty's avatar
      IB/{hfi1, qib, rdmavt}: Move logic to allocate receive WQE into rdmavt · 832369fa
      Brian Welty authored 
      Moving receive-side WQE allocation logic into rdmavt will allow
further code reuse between qib and hfi1 drivers.
Reviewed-by: default avatarMike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: default avatarDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: default avatarBrian Welty <brian.welty@intel.com>
Signed-off-by: default avatarHarish Chegondi <harish.chegondi@intel.com>
Signed-off-by: default avatarDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: default avatarDoug Ledford <dledford@redhat.com>
      832369fa
    • Sebastian Sanchez's avatar
      IB/{hfi1, rdmavt, qib}: Implement CQ completion vector support · 5d18ee67
      Sebastian Sanchez authored 
      Currently the driver doesn't support completion vectors. These
are used to indicate which sets of CQs should be grouped together
into the same vector. A vector is a CQ processing thread that
runs on a specific CPU.

If an application has several CQs bound to different completion
vectors, and each completion vector runs on different CPUs, then
the completion queue workload is balanced. This helps scale as more
nodes are used.

Implement CQ completion vector support using a global workqueue
where a CQ entry is queued to the CPU corresponding to the CQ's
completion vector. Since the workqueue is global, it's guaranteed
to always be there when queueing CQ entries; Therefore, the RCU
locking for cq->rdi->worker in the hot path is superfluous.

Each completion vector is assigned to a different CPU. The number of
completion vectors available is computed by taking the number of
online, physical CPUs from the local NUMA node and subtracting the
CPUs used for kernel receive queues and the general interrupt.
Special use cases:

  * If there are no CPUs left for completion vectors, the same CPU
    for the general interrupt is used; Therefore, there would only
    be one completion vector available.

  * For multi-HFI systems, the number of completion vectors available
    for each device is the total number of completion vectors in
    the local NUMA node divided by the number of devices in the same
    NUMA node. If there's a division remainder, the first device to
    get initialized gets an extra completion vector.

Upon a CQ creation, an invalid completion vector could be specified.
Handle it as follows:

  * If the completion vector is less than 0, set it to 0.

  * Set the completion vector to the result of the passed completion
    vector moded with the number of device completion vectors
    available.
Reviewed-by: default avatarMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: default avatarSebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: default avatarDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: default avatarDoug Ledford <dledford@redhat.com>
      5d18ee67
    • Sebastian Sanchez's avatar
      IB/hfi1: Create common functions for affinity CPU mask operations · cf38ea10
      Sebastian Sanchez authored 
      CPU masks are used to keep track of affinity assignments for IRQs
and processes. Operations performed on these affinity CPU masks are
duplicated throughout the code.

Create common functions for affinity CPU mask operations to remove
duplicate code.
Reviewed-by: default avatarMichael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: default avatarSebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: default avatarDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: default avatarDoug Ledford <dledford@redhat.com>
      cf38ea10
    • Sebastian Sanchez's avatar
      IB/hfi1: Optimize kthread pointer locking when queuing CQ entries · af8aab71
      Sebastian Sanchez authored 
      All threads queuing CQ entries on different CQs are unnecessarily
synchronized by a spin lock to check if the CQ kthread worker hasn't
been destroyed before queuing an CQ entry.

The lock used in 6efaf10f ("IB/rdmavt: Avoid queuing work into a
destroyed cq kthread worker") is a device global lock and will have
poor performance at scale as completions are entered from a large
number of CPUs.

Convert to use RCU where the read side of RCU is rvt_cq_enter() to
determine that the worker is alive prior to triggering the
completion event.
Apply write side RCU semantics in rvt_driver_cq_init() and
rvt_cq_exit().

Fixes: 6efaf10f ("IB/rdmavt: Avoid queuing work into a destroyed cq kthread worker")
Cc: <stable@vger.kernel.org> # 4.14.x
Reviewed-by: default avatarMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: default avatarSebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: default avatarDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: default avatarDoug Ledford <dledford@redhat.com>
      af8aab71
    • Kamenee Arumugam's avatar
      IB/Hfi1: Read CCE Revision register to verify the device is responsive · c872a1f9
      Kamenee Arumugam authored 
      When Hfi1 device is unresponsive, reading the RcvArrayCnt register
will return all 1's. This value is then used to remap chip's RcvArray.
The incorrect all ones value used in remapping RcvArray
will cause warn on as shown by trace below:

[<ffffffff81685eac>] dump_stack+0x19/0x1b
[<ffffffff81085820>] warn_slowpath_common+0x70/0xb0
[<ffffffff810858bc>] warn_slowpath_fmt+0x5c/0x80
[<ffffffff81065c29>] __ioremap_caller+0x279/0x320
[<ffffffff8142873c>] ? _dev_info+0x6c/0x90
[<ffffffffa021d155>] ? hfi1_pcie_ddinit+0x1d5/0x330 [hfi1]
[<ffffffff81065d62>] ioremap_wc+0x32/0x40
[<ffffffffa021d155>] hfi1_pcie_ddinit+0x1d5/0x330 [hfi1]
[<ffffffffa0204851>] hfi1_init_dd+0x1d1/0x2440 [hfi1]
[<ffffffff813503dc>] ? pci_write_config_word+0x1c/0x20

Read CCE revision register first to verify that WFR device is
responsive. If the read return "all ones", bail out from init
and fail the driver load.
Reviewed-by: default avatarMike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: default avatarMichael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: default avatarKamenee Arumugam <kamenee.arumugam@intel.com>
Signed-off-by: default avatarDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: default avatarDoug Ledford <dledford@redhat.com>
      c872a1f9
    • Mitko Haralanov's avatar
      IB/hfi1: Rework fault injection machinery · a74d5307
      Mitko Haralanov authored 
      The packet fault injection code present in the HFI1 driver had some
issues which not only fragment the code but also created user
confusion. Furthermore, it suffered from the following issues:

  1. The fault_packet method only worked for received packets. This
     meant that the only fault injection mode available for sent
     packets is fault_opcode, which did not allow for random packet
     drops on all egressing packets.
  2. The mask available for the fault_opcode mode did not really work
     due to the fact that the opcode values are not bits in a bitmask but
     rather sequential integer values. Creating a opcode/mask pair that
     would successfully capture a set of packets was nearly impossible.
  3. The code was fragmented and used too many debugfs entries to
     operate and control. This was confusing to users.
  4. It did not allow filtering fault injection on a per direction basis -
     egress vs. ingress.

In order to improve or fix the above issues, the following changes have
been made:

   1. The fault injection methods have been combined into a single fault
      injection facility. As such, the fault injection has been plugged
      into both the send and receive code paths. Regardless of method used
      the fault injection will operate on both egress and ingress packets.
   2. The type of fault injection - by packet or by opcode - is now controlled
      by changing the boolean value of the file "opcode_mode". When the value
      is set to True, fault injection is done by opcode. Otherwise, by
      packet.
   2. The masking ability has been removed in favor of a bitmap that holds
      opcodes of interest (one bit per opcode, a total of 256 bits). This
      works in tandem with the "opcode_mode" value. When the value of
      "opcode_mode" is False, this bitmap is ignored. When the value is
      True, the bitmap lists all opcodes to be considered for fault injection.
      By default, the bitmap is empty. When the user wants to filter by opcode,
      the user sets the corresponding bit in the bitmap by echo'ing the bit
      position into the 'opcodes' file. This gets around the issue that the set
      of opcodes does not lend itself to effective masks and allow for extremely
      fine-grained filtering by opcode.
   4. fault_packet and fault_opcode methods have been combined. Hence, there
      is only one debugfs directory controlling the entire operation of the
      fault injection machinery. This reduces the number of debugfs entries
      and provides a more unified user experience.
   5. A new control files - "direction" - is provided to allow the user to
      control the direction of packets, which are subject to fault injection.
   6. A new control file - "skip_usec" - is added that would allow the user
      to specify a "timeout" during which no fault injection will occur.

In addition, the following bug fixes have been applied:

   1. The fault injection code has been split into its own header and source
      files. This was done to better organize the code and support conditional
      compilation without littering the code with #ifdef's.
   2. The method by which the TX PIO packets were being marked for drop
      conflicted with the way send contexts were being setup. As a result,
      the send context was repeatedly being reset.
   3. The fault injection only makes sense when the user can control it
      through the debugfs entries. However, a kernel configuration can
      enable fault injection but keep fault injection debugfs entries
      disabled. Therefore, it makes sense that the HFI fault injection
      code depends on both.
   4. Error suppression did not take into account the method by which PIO
      packets were being dropped. Therefore, even with error suppression
      turned on, errors would still be displayed to the screen. A larger
      enough packet drop percentage would case the kernel to crash because
      the driver would be stuck printing errors.
Reviewed-by: default avatarDennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: default avatarDon Hiatt <don.hiatt@intel.com>
Reviewed-by: default avatarMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: default avatarMitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: default avatarDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: default avatarDoug Ledford <dledford@redhat.com>
      a74d5307
    • Alex Estrin's avatar
      IB/{hfi1, qib}: Add handling of kernel restart · 8d3e7113
      Alex Estrin authored 
      A warm restart will fail to unload the driver, leaving link state
potentially flapping up to the point the BIOS resets the adapter.
Correct the issue by hooking the shutdown pci method,
which will bring port down.

Cc: <stable@vger.kernel.org> # 4.9.x
Reviewed-by: default avatarMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: default avatarAlex Estrin <alex.estrin@intel.com>
Signed-off-by: default avatarDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: default avatarDoug Ledford <dledford@redhat.com>
      8d3e7113
    • Michael J. Ruhl's avatar
      IB/hfi1: Reorder incorrect send context disable · a93a0a31
      Michael J. Ruhl authored 
      User send context integrity bits are cleared before the context is
disabled.  If the send context is still processing data, any packets
that need those integrity bits will cause an error and halt the send
context.

During the disable handling, the driver waits for the context to drain.
If the context is halted, the driver will eventually timeout because
the context won't drain and then incorrectly bounce the link.

Reorder the bit clearing and the context disable.

Examine the software state and send context status as well as the
egress status to determine if a send context is in the halted state.

Promote the check macros to static functions for consistency with the
new check and to follow kernel style.

Remove an unused define that refers to the egress timeout.

Cc: <stable@vger.kernel.org> # 4.9.x
Reviewed-by: default avatarMitko Haralanov <mitko.haralanov@intel.com>
Reviewed-by: default avatarMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: default avatarMichael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: default avatarDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: default avatarDoug Ledford <dledford@redhat.com>
      a93a0a31
    • Michael J. Ruhl's avatar
      IB/hfi1: Return correct value for device state · e4607073
      Michael J. Ruhl authored 
      The driver_pstate() function is used to map internal driver state
information to externally defined states.

The VERIFY_CAP and GOING_UP states are config/training states, but
the mapping routing returns the POLLING value.

Update the return values for VERIFY_CAP and GOING_UP to return the
correct value: TRAINING.
Reviewed-by: default avatarSebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: default avatarMichael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: default avatarDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: default avatarDoug Ledford <dledford@redhat.com>
      e4607073
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7