VAS allocate, modify and deallocate HCALLs returns
H_LONG_BUSY_ORDER_1_MSEC or H_LONG_BUSY_ORDER_10_MSEC for busy
delay and expects OS to reissue HCALL after that delay. But using
msleep() will often sleep at least 20 msecs even though the
hypervisor suggests OS reissue these HCALLs after 1 or 10msecs.

The open and close VAS window functions hold mutex and then issue
these HCALLs. So these operations can take longer than the
necessary when multiple threads issue open or close window APIs
simultaneously, especially might affect the performance in the
case of repeat open/close APIs for each compression request.

Multiple tasks can open / close VAS windows at the same time
which depends on the available VAS credits. For example, 240
cores system provides 4800 VAS credits. It means 4800 tasks can
execute open VAS windows HCALLs with the mutex. Since each
msleep() will often sleep more than 20 msecs, some tasks are
waiting more than 120 secs to acquire mutex. It can cause hung
traces for these tasks in dmesg due to mutex contention around
open/close HCALLs.

Instead of msleep(), use usleep_range() to ensure sleep with
the expected value before issuing HCALL again. So since each
task sleep 10 msecs maximum, this patch allow more tasks can
issue open/close VAS calls without any hung traces in the
dmesg.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Suggested-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240116055910.421605-1-haren@linux.ibm.com

In the current design, a numa-node is made online only if that node is
attached to cpu/memory. With this design, if any PCI/IO device is found
to be attached to a numa-node which is not online then the numa-node
id of the corresponding PCI/IO device is set to NUMA_NO_NODE(-1). This
design may negatively impact the performance of PCIe device if the
numa-node assigned to PCIe device is -1 because in such case we may not
be able to accurately calculate the distance between two nodes.

The multi-controller NVMe PCIe disk has an issue with calculating the
node distance if the PCIe NVMe controller is attached to a PCI host
bridge which has numa-node id value set to NUMA_NO_NODE. This patch
helps fix this ensuring that a cpu/memory less numa node is made online
if it's attached to PCI host bridge.
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240517142531.3273464-3-nilay@linux.ibm.com

Dynamic DMA Window (DDW) supports TCEs that are backed by 2MB page
size. In most configurations, DDW is big enough to pre-map all of LPAR
memory for IO. Pre-mapping of memory for DMA results in improvements in
IO performance.

Persistent memory, vPMEM, can be assigned to an LPAR as well. vPMEM is
not contiguous with LPAR memory and usually is assigned at high memory
addresses.  This makes is not possible to pre-map both vPMEM and LPAR
memory in the same DDW.

For a dedicated adapter this limitation is not an issue. Dedicated
adapters can have both Default DMA window, which is backed by 4K page
size and a DDW backed by 2MB page size TCEs. In this scenario, LPAR
memory is pre-mapped in the DDW.  Any DMA going to the vPMEM is routed
via dynamically allocated TCEs in the default window.

The issue arises with SR-IOV adapters. There is only one DMA window -
either Default or DDW. If an LPAR has vPMEM assigned, memory is not
pre-mapped in the DDW since TCEs needs to be allocated for vPMEM as well.
In this case, DDW is created and TCEs are dynamically allocated for both
vPMEM and LPAR memory.

Today, DDW is only used in single mode - direct mapped TCEs or
dynamically mapped TCEs. This enhancement breaks a single DDW in 2
regions -

	1. First region to pre-map LPAR memory
	2. Second region to dynamically allocate TCEs for IO to vPMEM

The DDW is split only if it is big enough to pre-map complete LPAR
memory and still have some space left to dynamically map vPMEM. Maximum
size possible DDW is created as permitted by the Hypervisor.
Signed-off-by: Gaurav Batra <gbatra@linux.ibm.com>
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240514014608.35537-1-gbatra@linux.ibm.com

Remove extended_cede_processor() and its helpers as
extended_cede_processor() has no callers since
commit 48f6e7f6("powerpc/pseries: remove cede offline state for CPUs")
Signed-off-by: Gautam Menghani <gautam@linux.ibm.com>
Acked-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240514132457.292865-1-gautam@linux.ibm.com

Pull ata fixes from Niklas Cassel:

 - Add a quirk for three different devices that have shown issues with
   LPM (link power management). These devices appear to not implement
   LPM properly, since we see command timeouts when enabling LPM. The
   quirk disables LPM for these problematic devices. (Me)

 - Do not apply the Intel PCS quirk on Alder Lake. The quirk is not
   needed and was originally added by mistake when LPM support was
   enabled for this AHCI controller. Enabling the quirk when not needed
   causes the the controller to not be able to detect the connected
   devices on some platforms.

* tag 'ata-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
  ata: libata-core: Add ATA_HORKAGE_NOLPM for Apacer AS340
  ata: libata-core: Add ATA_HORKAGE_NOLPM for AMD Radeon S3 SSD
  ata: libata-core: Add ATA_HORKAGE_NOLPM for Crucial CT240BX500SSD1
  ata: ahci: Do not apply Intel PCS quirk on Intel Alder Lake

Pull x86 fixes from Ingo Molnar:
 "Miscellaneous topology parsing fixes:

   - Fix topology parsing regression on older CPUs in the new AMD/Hygon
     parser

   - Fix boot crash on odd Intel Quark and similar CPUs that do not fill
     out cpuinfo_x86::x86_clflush_size and zero out
     cpuinfo_x86::x86_cache_alignment as a result.

     Provide 32 bytes as a general fallback value.

   - Fix topology enumeration on certain rare CPUs where the BIOS locks
     certain CPUID leaves and the kernel unlocked them late, which broke
     with the new topology parsing code. Factor out this unlocking logic
     and move it earlier in the parsing sequence"

* tag 'x86-urgent-2024-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/topology/intel: Unlock CPUID before evaluating anything
  x86/cpu: Provide default cache line size if not enumerated
  x86/topology/amd: Evaluate SMT in CPUID leaf 0x8000001e only on family 0x17 and greater

Pull scheduler fix from Ingo Molnar:
 "Export a symbol to make life easier for instrumentation/debugging"

* tag 'sched-urgent-2024-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/x86: Export 'percpu arch_freq_scale'

Pull perf events fix from Ingo Molnar:
 "Add missing MODULE_DESCRIPTION() lines"

* tag 'perf-urgent-2024-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel: Add missing MODULE_DESCRIPTION() lines
  perf/x86/rapl: Add missing MODULE_DESCRIPTION() line

Pull hardening fixes from Kees Cook:

 - scsi: mpt3sas: Avoid possible run-time warning with long manufacturer
   strings

 - mailmap: update entry for Kees Cook

 - kunit/fortify: Remove __kmalloc_node() test

* tag 'hardening-v6.10-rc2-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  kunit/fortify: Remove __kmalloc_node() test
  mailmap: update entry for Kees Cook
  scsi: mpt3sas: Avoid possible run-time warning with long manufacturer strings

Pull powerpc fixes from Michael Ellerman:

 - Enforce full ordering for ATOMIC operations with BPF_FETCH

 - Fix uaccess build errors seen with GCC 13/14

 - Fix build errors on ppc32 due to ARCH_HAS_KERNEL_FPU_SUPPORT

 - Drop error message from lparcfg guest name lookup

Thanks to Christophe Leroy, Guenter Roeck, Nathan Lynch, Naveen N Rao,
Puranjay Mohan, and Samuel Holland.

* tag 'powerpc-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc: Limit ARCH_HAS_KERNEL_FPU_SUPPORT to PPC64
  powerpc/uaccess: Use YZ asm constraint for ld
  powerpc/uaccess: Fix build errors seen with GCC 13/14
  powerpc/pseries/lparcfg: drop error message from guest name lookup
  powerpc/bpf: enforce full ordering for ATOMIC operations with BPF_FETCH

Merge tag 'firewire-fixes-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394

Pull firewire fix from Takashi Sakamoto:
 "After merging a commit 1fffe7a3 ("script: modpost: emit a warning
  when the description is missing"), MODULE_DESCRIPTOR seems to be
  mandatory for kernel modules. In FireWire subsystem, the most of
  practical kernel modules have the field, while KUnit test modules do
  not. A single patch is applied to fix them"

* tag 'firewire-fixes-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: add missing MODULE_DESCRIPTION() to test modules

Pull smb client fixes from Steve French:
 "Two small smb3 fixes:

   - Fix socket creation with sfu mount option (spotted by test generic/423)

   - Minor cleanup: fix missing description in two files"

* tag '6.10-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix creating sockets when using sfu mount options
  fs: smb: common: add missing MODULE_DESCRIPTION() macros

Merge tag 'kbuild-fixes-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix a Kconfig bug regarding comparisons to 'm' or 'n'

 - Replace missed $(srctree)/$(src)

 - Fix unneeded kallsyms step 3

 - Remove incorrect "compatible" properties from image nodes in
   image.fit

 - Improve gen_kheaders.sh

 - Fix 'make dt_binding_check'

 - Clean up unnecessary code

* tag 'kbuild-fixes-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  dt-bindings: kbuild: Fix dt_binding_check on unconfigured build
  kheaders: use `command -v` to test for existence of `cpio`
  kheaders: explicitly define file modes for archived headers
  scripts/make_fit: Drop fdt image entry compatible string
  kbuild: remove a stale comment about cleaning in link-vmlinux.sh
  kbuild: fix short log for AS in link-vmlinux.sh
  kbuild: change scripts/mksysmap into sed script
  kbuild: avoid unneeded kallsyms step 3
  kbuild: scripts/gdb: Replace missed $(srctree)/$(src) w/ $(src)
  kconfig: remove redundant check in expr_join_or()
  kconfig: fix comparison to constant symbols, 'm', 'n'
  kconfig: remove unused expr_is_no()

Pull xfs fixes from Chandan Babu:

 - Fix a livelock by dropping an xfarray sortinfo folio when an error
   is encountered

 - During extended attribute operations, Initialize transaction
   reservation computation based on attribute operation code

 - Relax symbolic link's ondisk verification code to allow symbolic
   links with short remote targets

 - Prevent soft lockups when unmapping file ranges and also during
   remapping blocks during a reflink operation

 - Fix compilation warnings when XFS is built with W=1 option

* tag 'xfs-6.10-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: Add cond_resched to block unmap range and reflink remap path
  xfs: don't open-code u64_to_user_ptr
  xfs: allow symlinks with short remote targets
  xfs: fix xfs_init_attr_trans not handling explicit operation codes
  xfs: drop xfarray sortinfo folio on error
  xfs: Stop using __maybe_unused in xfs_alloc.c
  xfs: Clear W=1 warning in xfs_iwalk_run_callbacks()

Pull tty fix from Greg KH:
 "Here is a single revert for a much-reported regression in 6.10-rc1
  when it comes to a few older architectures.

  Turns out that the VT ioctls don't work the same across all cpu types
  because of some old compatibility requrements for stuff like alpha and
  powerpc. So revert the change that attempted to have them use the
  _IO() macros and go back to the known-working values instead.

  This has NOT been in linux-next but has had many reports that it fixes
  the issue with 6.10-rc1"

* tag 'tty-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  Revert "VT: Use macros to define ioctls"

Pull landlock fix from Mickaël Salaün:
 "This fixes a wrong path walk triggered by syzkaller"

* tag 'landlock-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
  selftests/landlock: Add layout1.refer_mount_root
  landlock: Fix d_parent walk

This reverts commit 8c467f33.

Turns out this breaks many architectures as the vt ioctls do not all
match up everywhere due to historical reasons, so the original commit is
invalid for many values.
Reported-by: Nick Bowler <nbowler@draconx.ca>
Reported-by: Arnd Bergmann <arnd@kernel.org>
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Gladkov <legion@kernel.org>
Link: https://lore.kernel.org/r/ad4e561c-1d49-4f25-882c-7a36c6b1b5c0@draconx.ca
Link: https://lore.kernel.org/r/0da9785e-ba44-4718-9d08-4e96c1ba7ab2@kernel.org
Link: https://lore.kernel.org/all/34d848f4-670b-4493-bf21-130ef862521b@xenosoft.de/Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull drm fixes from Dave Airlie:
 "This is the weekly fixes. Lots of small fixes across the board, one
  BUG_ON fix in shmem seems most important, otherwise amdgpu, i915, xe
  mostly with small fixes to all the other drivers.

  shmem:
   - fix BUG_ON in COW handling
   - warn when trying to pin imported objects

  buddy:
   - fix page size handling

  dma-buf:
   - sw-sync: Don't interfere with IRQ handling
   - fix kthreads-handling error path

  i915:
   - fix a race in audio component by registering it later
   - make DPT object unshrinkable to avoid shrinking when framebuffer
     has not shrunk
   - fix CCS id calculation to fix a perf regression
   - fix selftest caching mode
   - fix FIELD_PREP compiler warnings
   - fix indefinite wait for GT wakeref release
   - revert overeager multi-gt pm reference removal

  xe:
   - pcode polling timeout change
   - fix for deadlocks for faulting VMs
   - error-path lock imbalance fix

  amdgpu:
   - RAS fix
   - fix colorspace property for MST connectors
   - fix for PCIe DPM
   - silence UBSAN warning
   - GPUVM robustness fix
   - partition fix
   - drop deprecated I2C_CLASS_SPD

  amdkfd:
   - revert unused changes for certain 11.0.3 devices
   - simplify APU VRAM handling

  lima:
   - fix dma_resv-related deadlock in object pin

  msm:
   - remove build-time dependency on Python 3.9

  nouveau:
   - nvif: Fix possible integer overflow

  panel:
   - lg-sw43408: Select DP helpers; Declare backlight ops as static
   - sitronix-st7789v: Various fixes for jt240mhqs_hwt_ek_e3 panel

  panfrost:
   - fix dma_resv-related deadlock in object pin"

* tag 'drm-fixes-2024-06-01' of https://gitlab.freedesktop.org/drm/kernel: (35 commits)
  drm/msm: remove python 3.9 dependency for compiling msm
  drm/panel: sitronix-st7789v: fix display size for jt240mhqs_hwt_ek_e3 panel
  drm/panel: sitronix-st7789v: tweak timing for jt240mhqs_hwt_ek_e3 panel
  drm/panel: sitronix-st7789v: fix timing for jt240mhqs_hwt_ek_e3 panel
  drm/amd/pm: remove deprecated I2C_CLASS_SPD support from newly added SMU_14_0_2
  drm/amdgpu: Make CPX mode auto default in NPS4
  drm/amdkfd: simplify APU VRAM handling
  Revert "drm/amdkfd: fix gfx_target_version for certain 11.0.3 devices"
  drm/amdgpu: fix dereference null return value for the function amdgpu_vm_pt_parent
  drm/amdgpu: silence UBSAN warning
  drm/amdgpu: Adjust logic in amdgpu_device_partner_bandwidth()
  drm/i915: Fix audio component initialization
  drm/i915/dpt: Make DPT object unshrinkable
  drm/i915/gt: Fix CCS id's calculation for CCS mode setting
  drm/panel/lg-sw43408: mark sw43408_backlight_ops as static
  drm/i915/selftests: Set always_coherent to false when reading from CPU
  drm/panel/lg-sw43408: select CONFIG_DRM_DISPLAY_DP_HELPER
  drm/i915/guc: avoid FIELD_PREP warning
  drm/i915/gt: Disarm breadcrumbs if engines are already idle
  Revert "drm/i915: Remove extra multi-gt pm-references"
  ...

Merge tag 'hwmon-for-v6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:

 - sttcs: Fix property spelling

 - intel-m10-bmc-hwmon: Fix multiplier for N6000 board power sensor

 - ltc2992: Fix memory leak

 - dell-smm: Add Dell G15 5511 to fan control whitelist

* tag 'hwmon-for-v6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (shtc1) Fix property misspelling
  hwmon: (intel-m10-bmc-hwmon) Fix multiplier for N6000 board power sensor
  hwmon: (ltc2992) Fix memory leak in ltc2992_parse_dt()
  hwmon: (dell-smm) Add Dell G15 5511 to fan control whitelist

Merge tag 'mailbox-fixes-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox

Pull mailbox fix from Jassi Brar:

 - zynqmp-ipi: fix linker error on some configurations

* tag 'mailbox-fixes-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
  mailbox: zynqmp-ipi: drop irq_to_desc() call

Pull spi fixes from Mark Brown:
 "A series of fixes that came in since the merge window, the main thing
  being the fixes Andy did for DMA sync where we were calling into the
  DMA API in suprising ways and causing issues as a result, the main
  thing being confusing the IOMMU code.

  We've also got some fairly important fixes for the stm32 driver, it
  supports a wide range of hardware and some optimisations that were
  done recently have broken on some systems, and a fix to prevent
  glitched signals on the bus in the cadence driver"

* tag 'spi-fix-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: stm32: Don't warn about spurious interrupts
  spi: Assign dummy scatterlist to unidirectional transfers
  spi: cadence: Ensure data lines set to low during dummy-cycle period
  spi: stm32: Revert change that enabled controller before asserting CS
  spi: Check if transfer is mapped before calling DMA sync APIs
  spi: Don't mark message DMA mapped when no transfer in it is

Merge tag 'regulator-fix-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fix from Mark Brown:
 "One fix that came in since -rc1, fixing misuse of a local variable in
  the DT parsing code in the RTQ2208 driver"

* tag 'regulator-fix-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: rtq2208: Fix invalid memory access when devm_of_regulator_put_matches is called

Pull regmap fix from Mark Brown:
 "The I2C bus was not taking account of the register and any padding
  bytes when handling maximum write sizes supported by an I2C adaptor,
  this patch from Jim Wylder fixes that"

* tag 'regmap-fix-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap-i2c: Subtract reg size from max_write

Pull block fixes from Jens Axboe:

 - NVMe fixes via Keith:
      - Removing unused fields (Kanchan)
      - Large folio offsets support (Kundan)
      - Multipath NUMA node initialiazation fix (Nilay)
      - Multipath IO stats accounting fixes (Keith)
      - Circular lockdep fix (Keith)
      - Target race condition fix (Sagi)
      - Target memory leak fix (Sagi)

 - bcache fixes

 - null_blk fixes (Damien)

 - Fix regression in io.max due to throttle low removal (Waiman)

 - DM limit table fixes (Christoph)

 - SCSI and block limit fixes (Christoph)

 - zone fixes (Damien)

 - Misc fixes (Christoph, Hannes, hexue)

* tag 'block-6.10-20240530' of git://git.kernel.dk/linux: (25 commits)
  blk-throttle: Fix incorrect display of io.max
  block: Fix zone write plugging handling of devices with a runt zone
  block: Fix validation of zoned device with a runt zone
  null_blk: Do not allow runt zone with zone capacity smaller then zone size
  nvmet: fix a possible leak when destroy a ctrl during qp establishment
  nvme: use srcu for iterating namespace list
  bcache: code cleanup in __bch_bucket_alloc_set()
  bcache: call force_wake_up_gc() if necessary in check_should_bypass()
  bcache: allow allocator to invalidate bucket in gc
  block: check for max_hw_sectors underflow
  block: stack max_user_sectors
  sd: also set max_user_sectors when setting max_sectors
  null_blk: Print correct max open zones limit in null_init_zoned_dev()
  block: delete redundant function declaration
  null_blk: Fix return value of nullb_device_power_store()
  dm: make dm_set_zones_restrictions work on the queue limits
  dm: remove dm_check_zoned
  dm: move setting zoned_enabled to dm_table_set_restrictions
  block: remove blk_queue_max_integrity_segments
  nvme: adjust multiples of NVME_CTRL_PAGE_SIZE in offset
  ...

Pull io_uring fixes from Jens Axboe:
 "A couple of minor fixes for issues introduced in the 6.10 merge window:

   - Ensure that all read/write ops have an appropriate cleanup handler
     set (Breno)

   - Regression for applications still doing multiple mmaps even if
     FEAT_SINGLE_MMAP is set (me)

   - Move kmsg inquiry setting above any potential failure point,
     avoiding a spurious NONEMPTY flag setting on early error (me)"

* tag 'io_uring-6.10-20240530' of git://git.kernel.dk/linux:
  io_uring/net: assign kmsg inq/flags before buffer selection
  io_uring/rw: Free iovec before cleaning async data
  io_uring: don't attempt to mmap larger than what the user asks for

__kmalloc_node() is considered an "internal" function to the Slab, so
drop it from explicit testing.

Link: https://lore.kernel.org/r/20240531185703.work.588-kees@kernel.orgSigned-off-by: Kees Cook <kees@kernel.org>

Pull dma-mapping fixes from Christoph Hellwig:

 - dma-mapping benchmark error handling fixes (Fedor Pchelkin)

 - correct a config symbol reference in the DMA API documentation (Lukas
   Bulwahn)

* tag 'dma-mapping-6.10-2024-05-31' of git://git.infradead.org/users/hch/dma-mapping:
  Documentation/core-api: correct reference to SWIOTLB_DYNAMIC
  dma-mapping: benchmark: handle NUMA_NO_NODE correctly
  dma-mapping: benchmark: fix node id validation
  dma-mapping: benchmark: avoid needless copy_to_user if benchmark fails
  dma-mapping: benchmark: fix up kthread-related error handling

Pull sound fixes from Takashi Iwai:
 "Lots of small fixes:

   - A race fix for debugfs handling in ALSA core

   - A series of corrections for MIDI2 core format conversions

   - ASoC Intel fixes for 16 bit DMIC config

   - Updates for missing module parameters in ASoC code

   - HD-audio quirk, Cirrus codec fix, etc minor fixes"

* tag 'sound-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (26 commits)
  ALSA: seq: ump: Fix swapped song position pointer data
  ASoC: SOF: ipc4-topology: Adjust the params based on DAI formats
  ASoC: SOF: ipc4-topology: Improve readability of sof_ipc4_prepare_dai_copier()
  ASoC: SOF: ipc4-topology/pcm: Rename sof_ipc4_copier_is_single_format()
  ASoC: SOF: ipc4-topology: Print out the channel count in sof_ipc4_dbg_audio_format
  ASoC: SOF: ipc4-topology: Add support for NHLT with 16-bit only DMIC blob
  ALSA: seq: Fix yet another spot for system message conversion
  ALSA: ump: Set default protocol when not given explicitly
  ALSA: ump: Don't accept an invalid UMP protocol number
  ASoC: SOF: ipc4-topology: Fix input format query of process modules without base extension
  ASoC: Intel: sof-sdw: fix missing SPI_MASTER dependency
  ALSA: pcm: fix typo in comment
  ALSA: ump: Don't clear bank selection after sending a program change
  ALSA: seq: Fix incorrect UMP type for system messages
  ALSA/hda: intel-dsp-config: reduce log verbosity
  ALSA: seq: Don't clear bank selection at event -> UMP MIDI2 conversion
  ALSA: seq: Fix missing bank setup between MIDI1/MIDI2 UMP conversion
  ASoC: SOF: add missing MODULE_DESCRIPTION()
  ASoC: SOF: reorder MODULE_ definitions
  ASoC: SOF: AMD: group all module related information
  ...

Merge tag 'platform-drivers-x86-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:

 - a use-after-free bugfix

 - Kconfig fixes for randconfig builds

 - allow setting touchscreen_dmi quirks from the cmdline for debugging

 - touchscreen_dmi quirks for two new laptop/tablet models

* tag 'platform-drivers-x86-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: touchscreen_dmi: Add info for the EZpad 6s Pro
  platform/x86: touchscreen_dmi: Add info for GlobalSpace SolT IVW 11.6" tablet
  platform/x86: touchscreen_dmi: Add support for setting touchscreen properties from cmdline
  platform/x86: thinkpad_acpi: Select INPUT_SPARSEKMAP in Kconfig
  platform/x86: x86-android-tablets: Add "select LEDS_CLASS"
  platform/x86: ISST: fix use-after-free in tpmi_sst_dev_remove()

Pull RISC-V fixes from Palmer Dabbelt:

 - A fix to avoid pt_regs aliasing with idle thread stacks on secondary
   harts.

 - HAVE_ARCH_HUGE_VMAP is enabled on XIP kernels, which fixes boot
   issues on XIP systems with huge pages.

 - An update to the uABI documentation clarifying that only scalar
   misaligned accesses were grandfathered in as supported, as the vector
   extension did not exist at the time the uABI was frozen.

 - A fix for the recently-added byte/half atomics to avoid losing the
   fully ordered decorations.

* tag 'riscv-for-linus-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Fix fully ordered LR/SC xchg[8|16]() implementations
  Documentation: RISC-V: uabi: Only scalar misaligned loads are supported
  riscv: enable HAVE_ARCH_HUGE_VMAP for XIP kernel
  riscv: prevent pt_regs corruption for secondary idle threads

Pull bcachefs fixes from Kent Overstreet:
 "Assorted odds and ends...

   - two downgrade fixes

   - a couple snapshot deletion and repair fixes, thanks to noradtux for
     finding these and providing the image to debug them

   - a couple assert fixes

   - convert to folio helper, from Matthew

   - some improved error messages

   - bit of code reorganization (just moving things around); doing this
     while things are quiet so I'm not rebasing fixes past reorgs

   - don't return -EROFS on inconsistency error in recovery, this
     confuses util-linux and has it retry the mount

   - fix failure to return error on misaligned dio write; reported as an
     issue with coreutils shred"

* tag 'bcachefs-2024-05-30' of https://evilpiepirate.org/git/bcachefs: (21 commits)
  bcachefs: Fix failure to return error on misaligned dio write
  bcachefs: Don't return -EROFS from mount on inconsistency error
  bcachefs: Fix uninitialized var warning
  bcachefs: Split out sb-errors_format.h
  bcachefs: Split out journal_seq_blacklist_format.h
  bcachefs: Split out replicas_format.h
  bcachefs: Split out disk_groups_format.h
  bcachefs: split out sb-downgrade_format.h
  bcachefs: split out sb-members_format.h
  bcachefs: Better fsck error message for key version
  bcachefs: btree_gc can now handle unknown btrees
  bcachefs: add missing MODULE_DESCRIPTION()
  bcachefs: Fix setting of downgrade recovery passes/errors
  bcachefs: Run check_key_has_snapshot in snapshot_delete_keys()
  bcachefs: Refactor delete_dead_snapshots()
  bcachefs: Fix locking assert
  bcachefs: Fix lookup_first_inode() when inode_generations are present
  bcachefs: Plumb bkey into __btree_err()
  bcachefs: Use copy_folio_from_iter_atomic()
  bcachefs: Fix sb-downgrade validation
  ...

Intel CPUs have a MSR bit to limit CPUID enumeration to leaf two. If
this bit is set by the BIOS then CPUID evaluation including topology
enumeration does not work correctly as the evaluation code does not try
to analyze any leaf greater than two.

This went unnoticed before because the original topology code just
repeated evaluation several times and managed to overwrite the initial
limited information with the correct one later. The new evaluation code
does it once and therefore ends up with the limited and wrong
information.

Cure this by unlocking CPUID right before evaluating anything which
depends on the maximum CPUID leaf being greater than two instead of
rereading stuff after unlock.

Fixes: 22d63660 ("x86/cpu: Use common topology code for Intel")
Reported-by: Peter Schneider <pschneider1968@googlemail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/fd3f73dc-a86f-4bcf-9c60-43556a21eb42@googlemail.com

irq_to_desc() is not exported to loadable modules, so this driver now
fails to link in some configurations:

ERROR: modpost: "irq_to_desc" [drivers/mailbox/zynqmp-ipi-mailbox.ko] undefined!

I can't see a purpose for this call, since the return value is unused
and probably left over from some code refactoring.

Address the link failure by just removing the line.

Fixes: 6ffb1635 ("mailbox: zynqmp: handle SGI for shared IPI")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Tanmay Shah <tanmay.shah@amd.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>

I'm tired of gmail breaking DKIM. Switch everything over to my
@kernel.org alias instead.
Signed-off-by: Kees Cook <kees@kernel.org>

The prior strscpy() replacement of strncpy() here expected the
manufacture_reply strings to be NUL-terminated, but it is possible
they are not, as the code pattern here shows, e.g., edev->vendor_id
being exactly 1 character larger than manufacture_reply->vendor_id,
and the replaced strncpy() was copying only up to the size of the
source character array. Replace this with memtostr(), which is the
unambiguous way to convert a maybe not-NUL-terminated character array
into a NUL-terminated string.

Fixes: b7e9712a ("scsi: mpt3sas: Replace deprecated strncpy() with strscpy()")
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Marco Patalano <mpatalan@redhat.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240410023155.2100422-3-keescook@chromium.orgSigned-off-by: Kees Cook <kees@kernel.org>

When running fstest generic/423 with sfu mount option, it
was being skipped due to inability to create sockets:

  generic/423  [not run] cifs does not support mknod/mkfifo

which can also be easily reproduced with their af_unix tool:

  ./src/af_unix /mnt1/socket-two bind: Operation not permitted

Fix sfu mount option to allow creating and reporting sockets.

Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>

Add tests to check error codes when linking or renaming a mount root
directory.  This previously triggered a kernel warning, but it is fixed
with the previous commit.

Cc: Günther Noack <gnoack@google.com>
Cc: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20240516181935.1645983-3-mic@digikod.netSigned-off-by: Mickaël Salaün <mic@digikod.net>

The WARN_ON_ONCE() in collect_domain_accesses() can be triggered when
trying to link a root mount point.  This cannot work in practice because
this directory is mounted, but the VFS check is done after the call to
security_path_link().

Do not use source directory's d_parent when the source directory is the
mount point.

Cc: Günther Noack <gnoack@google.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: stable@vger.kernel.org
Reported-by: syzbot+bf4903dc7e12b18ebc87@syzkaller.appspotmail.com
Fixes: b91c3e4e ("landlock: Add support for file reparenting with LANDLOCK_ACCESS_FS_REFER")
Closes: https://lore.kernel.org/r/000000000000553d3f0618198200@google.com
Link: https://lore.kernel.org/r/20240516181935.1645983-2-mic@digikod.net
[mic: Fix commit message]
Signed-off-by: Mickaël Salaün <mic@digikod.net>

Commit 7627a0ed ("ata: ahci: Drop low power policy board type")
dropped the board_ahci_low_power board type, and instead enables LPM if:
-The AHCI controller reports that it supports LPM (Partial/Slumber), and
-CONFIG_SATA_MOBILE_LPM_POLICY != 0, and
-The port is not defined as external in the per port PxCMD register, and
-The port is not defined as hotplug capable in the per port PxCMD
 register.

Partial and Slumber LPM states can either be initiated by HIPM or DIPM.

For HIPM (host initiated power management) to get enabled, both the AHCI
controller and the drive have to report that they support HIPM.

For DIPM (device initiated power management) to get enabled, only the
drive has to report that it supports DIPM. However, the HBA will reject
device requests to enter LPM states which the HBA does not support.

The problem is that Apacer AS340 drives do not handle low power modes
correctly. The problem was most likely not seen before because no one
had used this drive with a AHCI controller with LPM enabled.

Add a quirk so that we do not enable LPM for this drive, since we see
command timeouts if we do (even though the drive claims to support DIPM).

Fixes: 7627a0ed ("ata: ahci: Drop low power policy board type")
Cc: stable@vger.kernel.org
Reported-by: Tim Teichmann <teichmanntim@outlook.de>
Closes: https://lore.kernel.org/linux-ide/87bk4pbve8.ffs@tglx/Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>