- 20 Jul, 2007 40 commits
-
-
Takashi Iwai authored
Show the last issued command in warning messages when any communication error with CORB/RIRB occurs. Also, a bit code clean-up for composing the command value in *_send_cmd(). Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Jaroslav Kysela <perex@suse.cz>
-
Takashi Iwai authored
Use ARRAY_SIZE() to calculate the number of pin widgets for each codec chip. This also fixes a typo in STAC9205 code that gives a wrong number (14 instead of 12), which resulted in fatal communication errors. Signed-off-by:
-
Robert P. J. Day authored
Signed-off-by:
Robert P. J. Day <rpjday@mindspring.com> Signed-off-by:
-
Takashi Iwai authored
The check of a substream in snd_pcm_drain() might not be always correct since runtime can point a different substream (although the PCM state of each linked substream should be same, in theory). This patch fixes it. Signed-off-by:
-
Takashi Iwai authored
Added missing model entries for HD-audio codecs in the module option list. Signed-off-by:
-
Takashi Iwai authored
Added the missing model option values for ALC262. Signed-off-by:
-
Claudio Matsuoka authored
Signed-off-by:
Claudio Matsuoka <cmatsuoka@gmail.com> Signed-off-by:
-
Claudio Matsuoka authored
Added HP Lucknow (ALC888) 5.1 surround support based on ALC883 6-channel threestack with changes in channel routing. Signed-off-by:
-
Claudio Matsuoka authored
Fixed HP Nettle 6ch/8ch channel routing based on ALC883 sixstack and swapping rear and center/LFE in verbs and mixer settings. Signed-off-by:
-
Takashi Iwai authored
Fix the mismatch of init verb and capture mux with VAIO STAC9872. Also, changed the item names to be more intuitive. Signed-off-by:
-
Kailang Yang authored
Fixed ALC662 auto mode, wrong NIDs were chosen. Signed-off-by:
Kailang Yang <kailang@realtek.com.tw> Signed-off-by:
-
Kailang Yang authored
- Added BenQ T31-16 AMD Turion64x2 (ALC262) support - Added models for ASUS machines with ALC861 Signed-off-by:
-
Claudio Matsuoka authored
Implemented LG LW20 5.1 support based on ALC880 threestack modes. It was previously set to use one DAC and 2 jack modes, giving 2-channel output only. Analog CD playing support is still missing. Signed-off-by:
-
Paul Vojta authored
Adds mention of opl3sa2 driver to a diagnostic message for NeoMagic nm256 driver. Signed-off-by:
Paul Vojta <vojta@math.berkeley.edu> Signed-off-by:
-
Paul Vojta authored
Add Neomagic MagicWave 3D to list of supported devices for opl3sa2 driver. Signed-off-by:
-
Claudio Matsuoka authored
Added the model for HP Nettle mobo with ALC883. From: Claudio Matsuoka <cmatsuoka@gmail.com> Signed-off-by:
-
Claudio Matsuoka authored
Added the model for HP Spartan with Conexant codec chip. From: Claudio Matsuoka <cmatsuoka@gmail.com> Signed-off-by:
-
Claudio Matsuoka authored
Added a quirk for Roland Juno-G. It's simply a copy of Fantom-X with the IDs changed. From: Claudio Matsuoka <cmatsuoka@gmail.com> Signed-off-by:
-
Masakazu Mokuno authored
The patch adds the support for the sound feature of PS3 - the digital output of HDMI and SPDIF optical, and the analog output of AV multi. Signed-off-by:
Masakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by:
-
Carlo Beccaria authored
Add quirks to detect the Roland SH-201. Signed-off-by:
Carlo Beccaria <carlo@beccaria.org> Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
-
Takashi Iwai authored
The STAC codec support code has the automatic recognition of additional side-output pins, and this may result in an error when the assigned pin has no corresponding DAC connection. The patch fixes the problem -- it corrects the line_outs again without such additional pins. Signed-off-by:
-
Adrian Bunk authored
This patch removes some dead code spotted by the Coverity checker. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Randy Dunlap authored
FIx section mismatch when CONFIG_HOTPLUG=n: WARNING: sound/built-in.o(.exit.text+0x271): Section mismatch: reference to .init.text:snd_p ortman_unregister_all (between 'snd_portman_module_exit' and 'alsa_mpu401_uart_exit') Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Randy Dunlap authored
Fix ensoniq driver sections when HOTPLUG=n, but code is used during resume, so it cannot be discarded: WARNING: sound/pci/snd-ens1371.o(.text+0x5c0): Section mismatch: reference to .init.text: (between 'snd_ensoniq_chip_init' and 'snd_ensoniq_free') Signed-off-by:
-
Tobin Davis authored
This patch changes the default configuration for the Fujitsu Siemens Si3515 Laptop to the correct model=laptop. Signed-off-by:
Tobin Davis <tdavis@dsl-only.net> Signed-off-by:
-
Mike Crash authored
Added support for S/PDIF digital output on ASUS M2V motheboard - added new model '3stack-660-digout' and ALC660VD_3ST_DIG Signed-off-by:
Mike Crash <mike@mikecrash.com> Signed-off-by:
-
Takashi Iwai authored
Fixed the invalid use of schedule_timeout_interruptible() without checking pending signals. Simply replaced with schedule_timeout(). Suggestions thanks to Jeff Garzik. Signed-off-by:
-
Randy Dunlap authored
Something about __init_or_module isn't working as expected (?). CONFIG_HOTPLUG=y CONFIG_MODULES=n Fix shared init/exit code helper: WARNING: sound/built-in.o(.exit.text+0x243): Section mismatch: reference to .init.text: (between 'alsa_card_mpu401_exit' and 'ac97_bus_exit') WARNING: sound/built-in.o(.exit.text+0x21b): Section mismatch: reference to .init.text: (between 'alsa_card_dummy_exit' and 'alsa_card_serial_exit') Signed-off-by:
-
Randy Dunlap authored
Fix shared init/exit function attributes: WARNING: sound/built-in.o(.exit.text+0x4a1): Section mismatch: reference to .init.text: (between 'alsa_card_virmidi_exit' and 'alsa_card_serial_exit') WARNING: sound/built-in.o(.exit.text+0x4c1): Section mismatch: reference to .init.text: (between 'alsa_card_serial_exit' and 'ac97_bus_exit') Signed-off-by:
-
Takashi Iwai authored
Added AD1882 codec support. It has currently two models, 3stack and 6stack. Signed-off-by:
-
Jonathan Phenix authored
This patch output information about the MFG (Modem Function Group) to the /proc/asound/card?/codec#? file. This information is important to identify if a HDA device has a modem or not. Signed-off-by:
Jonathan Phenix <jonathan@linuxant.com> Signed-off-by:
-
Matthew Ranostay authored
Added support for EAPD on the 927x, and 9227-8 IDT HDA codecs. Enabling EAPD powers the internal speaker amp otherwise there is no sound on systems with an internal amp. Signed-off-by:
Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by:
-
Takashi Iwai authored
Added a new model 'dell' for Dell XPS M1210 with STAC922x codec chip. Signed-off-by:
-
Tobin Davis authored
This patch adds support for the Fujitsu Seimens Amilo Pro v3515 notebook. Signed-off-by:
-
Graeme Gregory authored
Somewhere when dealing with the s3c24xx patches and requested changes I managed to miss this file on re-submission. Its a header file required for compilation of neo1973-wm8573.c and should be a no brainer. Signed-off-by:
Graeme Gregory <gg@opensource.wolfsonmicro.com> Signed-off-by:
-
Takashi Iwai authored
The auto-configuration code didn't initialize the verbs correctly. Signed-off-by:
-
Takashi Iwai authored
Added model=lenovo for Toshiba A135 with ALC861VD codec. Signed-off-by:
-
Tobin Davis authored
This patch adds the HP Pavillion a1589L desktop system to the ALC883 configuration table. Signed-off-by:
-
Andrew Morton authored
sound/pci/ali5451/ali5451.c: In function 'snd_ali_prepare': sound/pci/ali5451/ali5451.c:716: warning: 'R2' may be used uninitialized in this function Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Pavel Hofman authored
* adding 8 more 32-bit capture channels (total of 16) for emu1010 cards * adding some code comments and card details description Signed-off-by:
Pavel Hofman <dustin@seznam.cz> Signed-off-by:
-
