- 14 Feb, 2020 40 commits
-
-
Stephen Warren authored
commit 1a3388d5 upstream. For a little over a year, U-Boot has configured the flow controller to perform automatic RAM re-repair on off->on power transitions of the CPU rail[1]. This is mandatory for correct operation of Tegra124. However, RAM re-repair relies on certain clocks, which the kernel must enable and leave running. PLLP is one of those clocks. This clock is shut down during LP1 in order to save power. Enable bypass (which I believe routes osc_div_clk, essentially the crystal clock, to the PLL output) so that this clock signal toggles even though the PLL is not active. This is required so that LP1 power mode (system suspend) operates correctly. The bypass configuration must then be undone when resuming from LP1, so that all peripheral clocks run at the expected rate. Without this, many peripherals won't work correctly; for example, the UART baud rate would be incorrect. NVIDIA's downstream kernel code only does this if not compiled for Tegra30, so the added code is made conditional upon the chip ID. NVIDIA's downstream code makes this change conditional upon the active CPU cluster. The upstream kernel currently doesn't support cluster switching, so this patch doesn't test the active CPU cluster ID. [1] 3cc7942a4ae5 ARM: tegra: implement RAM repair Reported-by:
Jonathan Hunter <jonathanh@nvidia.com> Cc: stable@vger.kernel.org Signed-off-by:
Stephen Warren <swarren@nvidia.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Josef Bacik authored
commit d62b23c9 upstream. If we abort a transaction we have the following sequence if (!trans->dirty && list_empty(&trans->new_bgs)) return; WRITE_ONCE(trans->transaction->aborted, err); The idea being if we didn't modify anything with our trans handle then we don't really need to abort the whole transaction, maybe the other trans handles are fine and we can carry on. However in the case of create_snapshot we add a pending_snapshot object to our transaction and then commit the transaction. We don't actually modify anything. sync() behaves the same way, attach to an existing transaction and commit it. This means that if we have an IO error in the right places we could abort the committing transaction with our trans->dirty being not set and thus not set transaction->aborted. This is a problem because in the create_snapshot() case we depend on pending->error being set to something, or btrfs_commit_transaction returning an error. If we are not the trans handle that gets to commit the transaction, and we're waiting on the commit to happen we get our return value from cur_trans->aborted. If this was not set to anything because sync() hit an error in the transaction commit before it could modify anything then cur_trans->aborted would be 0. Thus we'd return 0 from btrfs_commit_transaction() in create_snapshot. This is a problem because we then try to do things with pending_snapshot->snap, which will be NULL because we didn't create the snapshot, and then we'll get a NULL pointer dereference like the following "BUG: kernel NULL pointer dereference, address: 00000000000001f0" RIP: 0010:btrfs_orphan_cleanup+0x2d/0x330 Call Trace: ? btrfs_mksubvol.isra.31+0x3f2/0x510 btrfs_mksubvol.isra.31+0x4bc/0x510 ? __sb_start_write+0xfa/0x200 ? mnt_want_write_file+0x24/0x50 btrfs_ioctl_snap_create_transid+0x16c/0x1a0 btrfs_ioctl_snap_create_v2+0x11e/0x1a0 btrfs_ioctl+0x1534/0x2c10 ? free_debug_processing+0x262/0x2a3 do_vfs_ioctl+0xa6/0x6b0 ? do_sys_open+0x188/0x220 ? syscall_trace_enter+0x1f8/0x330 ksys_ioctl+0x60/0x90 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x4a/0x1b0 In order to fix this we need to make sure anybody who calls commit_transaction has trans->dirty set so that they properly set the trans->transaction->aborted value properly so any waiters know bad things happened. This was found while I was running generic/475 with my modified fsstress, it reproduced within a few runs. I ran with this patch all night and didn't see the problem again. CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
Josef Bacik <josef@toxicpanda.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Chuhong Yuan authored
commit 7f8c36fe upstream. Since tasklet is needed to be initialized before registering IRQ handler, adjust the position of tasklet_init to fix the wrong order. Besides, to fix the missed tasklet_kill, this patch adds a helper function and uses devm_add_action to kill the tasklet automatically. Fixes: ce921368 ("crypto: picoxcell - add support for the picoxcell crypto engines") Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Herbert Xu authored
commit 73669cc5 upstream. The function crypto_spawn_alg is racy because it drops the lock before shooting the dying algorithm. The algorithm could disappear altogether before we shoot it. This patch fixes it by moving the shooting into the locked section. Fixes: 6bfd4809 ("[CRYPTO] api: Added spawns") Signed-off-by:
-
Tudor Ambarus authored
commit 781a08d9 upstream. 32 bit counter is not supported by neither of our AES IPs, all implement a 16 bit block counter. Drop the 32 bit block counter logic. Fixes: fcac8365 ("crypto: atmel-aes - fix the counter overflow in CTR mode") Signed-off-by:
Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by:
-
Herbert Xu authored
commit e8d99826 upstream. We should not be modifying the original request's MAY_SLEEP flag upon completion. It makes no sense to do so anyway. Reported-by:
Eric Biggers <ebiggers@kernel.org> Fixes: 5068c7a8 ("crypto: pcrypt - Add pcrypt crypto...") Signed-off-by:
-
Joe Thornber authored
commit 4feaef83 upstream. The space-maps track the reference counts for disk blocks allocated by both the thin-provisioning and cache targets. There are variants for tracking metadata blocks and data blocks. Transactionality is implemented by never touching blocks from the previous transaction, so we can rollback in the event of a crash. When allocating a new block we need to ensure the block is free (has reference count of 0) in both the current and previous transaction. Prior to this fix we were doing this by searching for a free block in the previous transaction, and relying on a 'begin' counter to track where the last allocation in the current transaction was. This 'begin' field was not being updated in all code paths (eg, increment of a data block reference count due to breaking sharing of a neighbour block in the same btree leaf). This fix keeps the 'begin' field, but now it's just a hint to speed up the search. Instead the current transaction is searched for a free block, and then the old transaction is double checked to ensure it's free. Much simpler. This fixes reports of sm_disk_new_block()'s BUG_ON() triggering when DM thin-provisioning's snapshots are heavily used. Reported-by:
Eric Wheeler <dm-devel@lists.ewheeler.net> Cc: stable@vger.kernel.org Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Michael Ellerman authored
commit dabf6b36 upstream. There's an OF helper called of_dma_is_coherent(), which checks if a device has a "dma-coherent" property to see if the device is coherent for DMA. But on some platforms devices are coherent by default, and on some platforms it's not possible to update existing device trees to add the "dma-coherent" property. So add a Kconfig symbol to allow arch code to tell of_dma_is_coherent() that devices are coherent by default, regardless of the presence of the property. Select that symbol on powerpc when NOT_COHERENT_CACHE is not set, ie. when the system has a coherent cache. Fixes: 92ea637e ("of: introduce of_dma_is_coherent() helper") Cc: stable@vger.kernel.org # v3.16+ Reported-by:
Christian Zigotzky <chzigotzky@xenosoft.de> Tested-by:
Michael Ellerman <mpe@ellerman.id.au> Reviewed-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Sven Van Asbroeck authored
commit a60ec78d upstream. This driver's remove path calls cancel_delayed_work(). However, that function does not wait until the work function finishes. This could mean that the work function is still running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling cancel_delayed_work_sync(), which ensures that that the work is properly cancelled, no longer running, and unable to re-schedule itself. This issue was detected with the help of Coccinelle. Cc: stable <stable@vger.kernel.org> Signed-off-by:
Sven Van Asbroeck <TheSven73@gmail.com> Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by:
-
Quinn Tran authored
commit 641e0efd upstream. MTCP dump failed due to MB Reg 10 was picking garbage data from stack memory. Fixes: 81178772 ("[SCSI] qla2xxx: Implemetation of mctp.") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191217220617.28084-14-hmadhani@marvell.comSigned-off-by:
Quinn Tran <qutran@marvell.com> Signed-off-by:
Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Herbert Xu authored
commit 7db3b61b upstream. We need to check whether spawn->alg is NULL under lock as otherwise the algorithm could be removed from under us after we have checked it and found it to be non-NULL. This could cause us to remove the spawn from a non-existent list. Fixes: 7ede5a5b ("crypto: api - Fix crypto_drop_spawn crash...") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Zhihao Cheng authored
[ Upstream commit f5de5b83 ] In ubifs, concurrent execution of writepage and bulk read on the same file may cause ABBA deadlock, for example (Reproduce method see Link): Process A(Bulk-read starts from page4) Process B(write page4 back) vfs_read wb_workfn or fsync ... ... generic_file_buffered_read write_cache_pages ubifs_readpage LOCK(page4) ubifs_bulk_read ubifs_writepage LOCK(ui->ui_mutex) ubifs_write_inode ubifs_do_bulk_read LOCK(ui->ui_mutex) find_or_create_page(alloc page4) ↑ LOCK(page4) <-- ABBA deadlock occurs! In order to ensure the serialization execution of bulk read, we can't remove the big lock 'ui->ui_mutex' in ubifs_bulk_read(). Instead, we allow ubifs_do_bulk_read() to lock page failed by replacing find_or_create_page(FGP_LOCK) with pagecache_get_page(FGP_LOCK | FGP_NOWAIT). Signed-off-by:
Zhihao Cheng <chengzhihao1@huawei.com> Suggested-by:
zhangyi (F) <yi.zhang@huawei.com> Cc: <Stable@vger.kernel.org> Fixes: 4793e7c5 ("UBIFS: add bulk-read facility") Link: https://bugzilla.kernel.org/show_bug.cgi?id=206153Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Hyunchul Lee authored
[ Upstream commit 480a1a6a ] In low memory situations, page allocations for bulk read can kill applications for reclaiming memory, and print an failure message when allocations are failed. Because bulk read is just an optimization, we don't have to do these and can stop page allocations. Though this siutation happens rarely, add __GFP_NORETRY to prevent from excessive memory reclaim and killing applications, and __GFP_WARN to suppress this failure message. For this, Use readahead_gfp_mask for gfp flags when allocating pages. Signed-off-by:
Hyunchul Lee <cheol.lee@lge.com> Signed-off-by:
-
Yurii Monakov authored
[ Upstream commit 6df19872 ] ks_pcie_stop_link() function does not clear LTSSM_EN_VAL bit so link training was not triggered more than once after startup. In configurations where link can be unstable during early boot, for example, under low temperature, it will never be established. Fixes: 0c4ffcfe ("PCI: keystone: Add TI Keystone PCIe driver") Signed-off-by:
Yurii Monakov <monakov.y@gmail.com> Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by:
Andrew Murray <andrew.murray@arm.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Linus Walleij authored
commit af3ed119 upstream. The code in mmc_spi_initsequence() tries to send a burst with high chipselect and for this reason hardcodes the device into SPI_CS_HIGH. This is not good because the SPI_CS_HIGH flag indicates logical "asserted" CS not always the physical level. In some cases the signal is inverted in the GPIO library and in that case SPI_CS_HIGH is already set, and enforcing SPI_CS_HIGH again will actually drive it low. Instead of hard-coding this, toggle the polarity so if the default is LOW it goes high to assert chipselect but if it is already high then toggle it low instead. Cc: Phil Elwell <phil@raspberrypi.org> Reported-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
-
Pingfan Liu authored
commit fbee6ba2 upstream. In lmb_is_removable(), if a section is not present, it should continue to test the rest of the sections in the block. But the current code fails to do so. Fixes: 51925fb3 ("powerpc/pseries: Implement memory hotplug remove in the kernel") Cc: stable@vger.kernel.org # v4.1+ Signed-off-by:
Pingfan Liu <kernelfans@gmail.com> Signed-off-by:
-
Gustavo A. R. Silva authored
commit 3e21d9a5 upstream. In case memory resources for _ptr2_ were allocated, release them before return. Notice that in case _ptr1_ happens to be NULL, krealloc() behaves exactly like kmalloc(). Addresses-Coverity-ID: 1490594 ("Resource leak") Link: http://lkml.kernel.org/r/20200123160115.GA4202@embeddedor Fixes: 3f15801c ("lib: add kasan test module") Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by:
Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Helen Koike authored
commit f51e50db upstream. boundary->width and boundary->height are sizes relative to boundary->left and boundary->top coordinates, but they were not being taken into consideration to adjust r->left and r->top, leading to the following error: Consider the follow as initial values for boundary and r: struct v4l2_rect boundary = { .left = 100, .top = 100, .width = 800, .height = 600, } struct v4l2_rect r = { .left = 0, .top = 0, .width = 1920, .height = 960, } calling v4l2_rect_map_inside(&r, &boundary) was modifying r to: r = { .left = 0, .top = 0, .width = 800, .height = 600, } Which is wrongly outside the boundary rectangle, because: v4l2_rect_set_max_size(r, boundary); // r->width = 800, r->height = 600 ... if (r->left + r->width > boundary->width) // true r->left = boundary->width - r->width; // r->left = 800 - 800 if (r->top + r->height > boundary->height) // true r->top = boundary->height - r->height; // r->height = 600 - 600 Fix this by considering top/left coordinates from boundary. Fixes: ac49de8c ("[media] v4l2-rect.h: new header with struct v4l2_rect helper functions") Signed-off-by:
Helen Koike <helen.koike@collabora.com> Cc: <stable@vger.kernel.org> # for v4.7 and up Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by:
-
John Hubbard authored
commit 3c7470b6 upstream. After DMA is complete, and the device and CPU caches are synchronized, it's still required to mark the CPU pages as dirty, if the data was coming from the device. However, this driver was just issuing a bare put_page() call, without any set_page_dirty*() call. Fix the problem, by calling set_page_dirty_lock() if the CPU pages were potentially receiving data from the device. Link: http://lkml.kernel.org/r/20200107224558.2362728-11-jhubbard@nvidia.comSigned-off-by:
John Hubbard <jhubbard@nvidia.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Acked-by:
-
Takashi Iwai authored
commit 2acf25f1 upstream. The loop termination for iterating over all formats should contain SNDRV_PCM_FORMAT_LAST, not less than it. Fixes: 9b151fec ("ALSA: dummy - Add debug proc file") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200201080530.22390-3-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Bryan O'Donoghue authored
commit d710562e upstream. Currently ecm->notify_req is used to flag when a request is in-flight. ecm->notify_req is set to NULL and when a request completes it is subsequently reset. This is fundamentally buggy in that the unbind logic of the ECM driver will unconditionally free ecm->notify_req leading to a NULL pointer dereference. Fixes: da741b8c ("usb ethernet gadget: split CDC Ethernet function") Cc: stable <stable@vger.kernel.org> Signed-off-by:
Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by:
Felipe Balbi <balbi@kernel.org> Signed-off-by:
-
Bryan O'Donoghue authored
commit 5b24c28c upstream. Currently ncm->notify_req is used to flag when a request is in-flight. ncm->notify_req is set to NULL and when a request completes it is subsequently reset. This is fundamentally buggy in that the unbind logic of the NCM driver will unconditionally free ncm->notify_req leading to a NULL pointer dereference. Fixes: 40d133d7 ("usb: gadget: f_ncm: convert to new function interface with backward compatibility") Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Roger Quadros authored
commit 463f67ae upstream. These interfaces do support super-speed so let's not limit maximum speed to high-speed. Cc: <stable@vger.kernel.org> Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
-
Navid Emamdoost authored
commit 4282dc05 upstream. In the implementation of brcmf_usbdev_qinit() the allocated memory for reqs is leaking if usb_alloc_urb() fails. Release reqs in the error handling path. Fixes: 71bb244b ("brcm80211: fmac: add USB support for bcm43235/6/8 chipsets") Signed-off-by:
Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Oliver Neukum authored
commit 2b8bd606 upstream. It is not enough to check for the number of endpoints. The types must also be correct. Reported-and-tested-by: syzbot+48a2851be24583b864dc@syzkaller.appspotmail.com Signed-off-by:
Oliver Neukum <oneukum@suse.com> Reviewed-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Will Deacon authored
commit 68035c80 upstream. Way back in 2017, fuzzing the 4.14-rc2 USB stack with syzkaller kicked up the following WARNING from the UVC chain scanning code: | list_add double add: new=ffff880069084010, prev=ffff880069084010, | next=ffff880067d22298. | ------------[ cut here ]------------ | WARNING: CPU: 1 PID: 1846 at lib/list_debug.c:31 __list_add_valid+0xbd/0xf0 | Modules linked in: | CPU: 1 PID: 1846 Comm: kworker/1:2 Not tainted | 4.14.0-rc2-42613-g1488251d1a98 #238 | Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 | Workqueue: usb_hub_wq hub_event | task: ffff88006b01ca40 task.stack: ffff880064358000 | RIP: 0010:__list_add_valid+0xbd/0xf0 lib/list_debug.c:29 | RSP: 0018:ffff88006435ddd0 EFLAGS: 00010286 | RAX: 0000000000000058 RBX: ffff880067d22298 RCX: 0000000000000000 | RDX: 0000000000000058 RSI: ffffffff85a58800 RDI: ffffed000c86bbac | RBP: ffff88006435dde8 R08: 1ffff1000c86ba52 R09: 0000000000000000 | R10: 0000000000000002 R11: 0000000000000000 R12: ffff880069084010 | R13: ffff880067d22298 R14: ffff880069084010 R15: ffff880067d222a0 | FS: 0000000000000000(0000) GS:ffff88006c900000(0000) knlGS:0000000000000000 | CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 | CR2: 0000000020004ff2 CR3: 000000006b447000 CR4: 00000000000006e0 | Call Trace: | __list_add ./include/linux/list.h:59 | list_add_tail+0x8c/0x1b0 ./include/linux/list.h:92 | uvc_scan_chain_forward.isra.8+0x373/0x416 | drivers/media/usb/uvc/uvc_driver.c:1471 | uvc_scan_chain drivers/media/usb/uvc/uvc_driver.c:1585 | uvc_scan_device drivers/media/usb/uvc/uvc_driver.c:1769 | uvc_probe+0x77f2/0x8f00 drivers/media/usb/uvc/uvc_driver.c:2104 Looking into the output from usbmon, the interesting part is the following data packet: ffff880069c63e00 30710169 C Ci:1:002:0 0 143 = 09028f00 01030080 00090403 00000e01 00000924 03000103 7c003328 010204db If we drop the lead configuration and interface descriptors, we're left with an output terminal descriptor describing a generic display: /* Output terminal descriptor */ buf[0] 09 buf[1] 24 buf[2] 03 /* UVC_VC_OUTPUT_TERMINAL */ buf[3] 00 /* ID */ buf[4] 01 /* type == 0x0301 (UVC_OTT_DISPLAY) */ buf[5] 03 buf[6] 7c buf[7] 00 /* source ID refers to self! */ buf[8] 33 The problem with this descriptor is that it is self-referential: the source ID of 0 matches itself! This causes the 'struct uvc_entity' representing the display to be added to its chain list twice during 'uvc_scan_chain()': once via 'uvc_scan_chain_entity()' when it is processed directly from the 'dev->entities' list and then again immediately afterwards when trying to follow the source ID in 'uvc_scan_chain_forward()' Add a check before adding an entity to a chain list to ensure that the entity is not already part of a chain. Link: https://lore.kernel.org/linux-media/CAAeHK+z+Si69jUR+N-SjN9q4O+o5KFiNManqEa-PjUta7EOb7A@mail.gmail.com/ Cc: <stable@vger.kernel.org> Fixes: c0efd232 ("V4L/DVB (8145a): USB Video Class driver") Reported-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
Will Deacon <will@kernel.org> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 784f8344 ] tp->segs_in and tp->segs_out need to be cleared in tcp_disconnect(). tcp_disconnect() is rarely used, but it is worth fixing it. Fixes: 2efd055c ("tcp: add tcpi_segs_in and tcpi_segs_out to tcp_info") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Marcelo Ricardo Leitner <mleitner@redhat.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit db7ffee6 ] tp->data_segs_in and tp->data_segs_out need to be cleared in tcp_disconnect(). tcp_disconnect() is rarely used, but it is worth fixing it. Fixes: a44d6eac ("tcp: Add RFC4898 tcpEStatsPerfDataSegsOut/In") Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 2fbdd562 ] tp->delivered needs to be cleared in tcp_disconnect(). tcp_disconnect() is rarely used, but it is worth fixing it. Fixes: ddf1af6f ("tcp: new delivery accounting") Signed-off-by:
Yuchung Cheng <ycheng@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit c13c48c0 ] total_retrans needs to be cleared in tcp_disconnect(). tcp_disconnect() is rarely used, but it is worth fixing it. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
David Howells authored
[ Upstream commit 5273a191 ] When a call is disconnected, the connection pointer from the call is cleared to make sure it isn't used again and to prevent further attempted transmission for the call. Unfortunately, there might be a daemon trying to use it at the same time to transmit a packet. Fix this by keeping call->conn set, but setting a flag on the call to indicate disconnection instead. Remove also the bits in the transmission functions where the conn pointer is checked and a ref taken under spinlock as this is now redundant. Fixes: 8d94aa38 ("rxrpc: Calls shouldn't hold socket refs") Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
David Howells authored
[ Upstream commit f71dbf2f ] In rxrpc_input_data(), rxrpc_notify_socket() is called if the base sequence number of the packet is immediately following the hard-ack point at the end of the function. However, this isn't sufficient, since the recvmsg side may have been advancing the window and then overrun the position in which we're adding - at which point rx_hard_ack >= seq0 and no notification is generated. Fix this by always generating a notification at the end of the input function. Without this, a long call may stall, possibly indefinitely. Fixes: 248f219c ("rxrpc: Rewrite the data and ack handling code") Signed-off-by:
-
Cong Wang authored
[ Upstream commit 599be01e ] As Eric noticed, tcindex_alloc_perfect_hash() uses cp->hash to compute the size of memory allocation, but cp->hash is set again after the allocation, this caused an out-of-bound access. So we have to move all cp->hash initialization and computation before the memory allocation. Move cp->mask and cp->shift together as cp->hash may need them for computation too. Reported-and-tested-by: syzbot+35d4dea36c387813ed31@syzkaller.appspotmail.com Fixes: 331b7292 ("net: sched: RCU cls_tcindex") Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 2b5b8251 ] hsr_port_get_rcu() can return NULL, so we need to be careful. general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] CPU: 1 PID: 10249 Comm: syz-executor.5 Not tainted 5.5.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__read_once_size include/linux/compiler.h:199 [inline] RIP: 0010:hsr_addr_is_self+0x86/0x330 net/hsr/hsr_framereg.c:44 Code: 04 00 f3 f3 f3 65 48 8b 04 25 28 00 00 00 48 89 45 d0 31 c0 e8 6b ff 94 f9 4c 89 f2 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 75 02 00 00 48 8b 43 30 49 39 c6 49 89 47 c0 0f RSP: 0018:ffffc90000da8a90 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff87e0cc33 RDX: 0000000000000006 RSI: ffffffff87e035d5 RDI: 0000000000000000 RBP: ffffc90000da8b20 R08: ffff88808e7de040 R09: ffffed1015d2707c R10: ffffed1015d2707b R11: ffff8880ae9383db R12: ffff8880a689bc5e R13: 1ffff920001b5153 R14: 0000000000000030 R15: ffffc90000da8af8 FS: 00007fd7a42be700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b32338000 CR3: 00000000a928c000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> hsr_handle_frame+0x1c5/0x630 net/hsr/hsr_slave.c:31 __netif_receive_skb_core+0xfbc/0x30b0 net/core/dev.c:5099 __netif_receive_skb_one_core+0xa8/0x1a0 net/core/dev.c:5196 __netif_receive_skb+0x2c/0x1d0 net/core/dev.c:5312 process_backlog+0x206/0x750 net/core/dev.c:6144 napi_poll net/core/dev.c:6582 [inline] net_rx_action+0x508/0x1120 net/core/dev.c:6650 __do_softirq+0x262/0x98c kernel/softirq.c:292 do_softirq_own_stack+0x2a/0x40 arch/x86/entry/entry_64.S:1082 </IRQ> Fixes: c5a75911 ("net/hsr: Use list_head (and rcu) instead of array for slave devices.") Signed-off-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Taehee Yoo authored
[ Upstream commit bd5cd35b ] gtp hashtable size is received by user-space. So, this hashtable size could be too large. If so, kmalloc will internally print a warning message. This warning message is actually not necessary for the gtp module. So, this patch adds __GFP_NOWARN to avoid this message. Splat looks like: [ 2171.200049][ T1860] WARNING: CPU: 1 PID: 1860 at mm/page_alloc.c:4713 __alloc_pages_nodemask+0x2f3/0x740 [ 2171.238885][ T1860] Modules linked in: gtp veth openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv] [ 2171.262680][ T1860] CPU: 1 PID: 1860 Comm: gtp-link Not tainted 5.5.0+ #321 [ 2171.263567][ T1860] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 2171.264681][ T1860] RIP: 0010:__alloc_pages_nodemask+0x2f3/0x740 [ 2171.265332][ T1860] Code: 64 fe ff ff 65 48 8b 04 25 c0 0f 02 00 48 05 f0 12 00 00 41 be 01 00 00 00 49 89 47 0 [ 2171.267301][ T1860] RSP: 0018:ffff8880b51af1f0 EFLAGS: 00010246 [ 2171.268320][ T1860] RAX: ffffed1016a35e43 RBX: 0000000000000000 RCX: 0000000000000000 [ 2171.269517][ T1860] RDX: 0000000000000000 RSI: 000000000000000b RDI: 0000000000000000 [ 2171.270305][ T1860] RBP: 0000000000040cc0 R08: ffffed1018893109 R09: dffffc0000000000 [ 2171.275973][ T1860] R10: 0000000000000001 R11: ffffed1018893108 R12: 1ffff11016a35e43 [ 2171.291039][ T1860] R13: 000000000000000b R14: 000000000000000b R15: 00000000000f4240 [ 2171.292328][ T1860] FS: 00007f53cbc83740(0000) GS:ffff8880da000000(0000) knlGS:0000000000000000 [ 2171.293409][ T1860] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2171.294586][ T1860] CR2: 000055f540014508 CR3: 00000000b49f2004 CR4: 00000000000606e0 [ 2171.295424][ T1860] Call Trace: [ 2171.295756][ T1860] ? mark_held_locks+0xa5/0xe0 [ 2171.296659][ T1860] ? __alloc_pages_slowpath+0x21b0/0x21b0 [ 2171.298283][ T1860] ? gtp_encap_enable_socket+0x13e/0x400 [gtp] [ 2171.298962][ T1860] ? alloc_pages_current+0xc1/0x1a0 [ 2171.299475][ T1860] kmalloc_order+0x22/0x80 [ 2171.299936][ T1860] kmalloc_order_trace+0x1d/0x140 [ 2171.300437][ T1860] __kmalloc+0x302/0x3a0 [ 2171.300896][ T1860] gtp_newlink+0x293/0xba0 [gtp] [ ... ] Fixes: 459aa660 ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit cb3c0e6b ] NLA_BINARY can be confusing, since .len value represents the max size of the blob. cls_rsvp really wants user space to provide long enough data for TCA_RSVP_DST and TCA_RSVP_SRC attributes. BUG: KMSAN: uninit-value in rsvp_get net/sched/cls_rsvp.h:258 [inline] BUG: KMSAN: uninit-value in gen_handle net/sched/cls_rsvp.h:402 [inline] BUG: KMSAN: uninit-value in rsvp_change+0x1ae9/0x4220 net/sched/cls_rsvp.h:572 CPU: 1 PID: 13228 Comm: syz-executor.1 Not tainted 5.5.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 rsvp_get net/sched/cls_rsvp.h:258 [inline] gen_handle net/sched/cls_rsvp.h:402 [inline] rsvp_change+0x1ae9/0x4220 net/sched/cls_rsvp.h:572 tc_new_tfilter+0x31fe/0x5010 net/sched/cls_api.c:2104 rtnetlink_rcv_msg+0xcb7/0x1570 net/core/rtnetlink.c:5415 netlink_rcv_skb+0x451/0x650 net/netlink/af_netlink.c:2477 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:5442 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0xf9e/0x1100 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x1248/0x14d0 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:639 [inline] sock_sendmsg net/socket.c:659 [inline] ____sys_sendmsg+0x12b6/0x1350 net/socket.c:2330 ___sys_sendmsg net/socket.c:2384 [inline] __sys_sendmsg+0x451/0x5f0 net/socket.c:2417 __do_sys_sendmsg net/socket.c:2426 [inline] __se_sys_sendmsg+0x97/0xb0 net/socket.c:2424 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2424 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45b349 Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f269d43dc78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f269d43e6d4 RCX: 000000000045b349 RDX: 0000000000000000 RSI: 00000000200001c0 RDI: 0000000000000003 RBP: 000000000075bfc8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000000009c2 R14: 00000000004cb338 R15: 000000000075bfd4 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:144 [inline] kmsan_internal_poison_shadow+0x66/0xd0 mm/kmsan/kmsan.c:127 kmsan_slab_alloc+0x8a/0xe0 mm/kmsan/kmsan_hooks.c:82 slab_alloc_node mm/slub.c:2774 [inline] __kmalloc_node_track_caller+0xb40/0x1200 mm/slub.c:4382 __kmalloc_reserve net/core/skbuff.c:141 [inline] __alloc_skb+0x2fd/0xac0 net/core/skbuff.c:209 alloc_skb include/linux/skbuff.h:1049 [inline] netlink_alloc_large_skb net/netlink/af_netlink.c:1174 [inline] netlink_sendmsg+0x7d3/0x14d0 net/netlink/af_netlink.c:1892 sock_sendmsg_nosec net/socket.c:639 [inline] sock_sendmsg net/socket.c:659 [inline] ____sys_sendmsg+0x12b6/0x1350 net/socket.c:2330 ___sys_sendmsg net/socket.c:2384 [inline] __sys_sendmsg+0x451/0x5f0 net/socket.c:2417 __do_sys_sendmsg net/socket.c:2426 [inline] __se_sys_sendmsg+0x97/0xb0 net/socket.c:2424 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2424 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 6fa8c014 ("[NET_SCHED]: Use nla_policy for attribute validation in classifiers") Signed-off-by:
-
Nobuhiro Iwamatsu authored
[ This is a fix specific to 4.4.y and 4.9.y stable trees; 4.14.y and older are not affected ] The of-node refcount fixes were made in commit 8d166720 ("ASoC: qcom: Fix of-node refcount unbalance in apq8016_sbc_parse_of()"), but not enough in 4.4.y and 4.9.y. The modification of link->codec_of_node is missing. This fixes of-node refcount unbalance to link->codec_of_node. Fixes: 8d166720 ("ASoC: qcom: Fix of-node refcount unbalance in apq8016_sbc_parse_of()") Cc: Patrick Lai <plai@codeaurora.org> Cc: Banajit Goswami <bgoswami@codeaurora.org> Cc: Takashi Iwai <tiwai@suse.de> Cc: Mark Brown <broonie@kernel.org> Cc: Sasha Levin <sashal@kernel.org> Signed-off-by:
Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 34ca70ef ] As discussed in the strace issue tracker, it appears that the sparc32 sysvipc support has been broken for the past 11 years. It was however working in compat mode, which is how it must have escaped most of the regular testing. The problem is that a cleanup patch inadvertently changed the uid/gid fields in struct ipc64_perm from 32-bit types to 16-bit types in uapi headers. Both glibc and uclibc-ng still use the original types, so they should work fine with compat mode, but not natively. Change the definitions to use __kernel_uid32_t and __kernel_gid32_t again. Fixes: 83c86984 ("sparc: unify ipcbuf.h") Link: https://github.com/strace/strace/issues/116 Cc: <stable@vger.kernel.org> # v2.6.29 Cc: Sam Ravnborg <sam@ravnborg.org> Cc: "Dmitry V . Levin" <ldv@altlinux.org> Cc: Rich Felker <dalias@libc.org> Cc: libc-alpha@sourceware.org Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Pawan Gupta authored
[ Upstream commit 5efc6fa9 ] /proc/cpuinfo currently reports Hardware Lock Elision (HLE) feature to be present on boot cpu even if it was disabled during the bootup. This is because cpuinfo_x86->x86_capability HLE bit is not updated after TSX state is changed via the new MSR IA32_TSX_CTRL. Update the cached HLE bit also since it is expected to change after an update to CPUID_CLEAR bit in MSR IA32_TSX_CTRL. Fixes: 95c5824f ("x86/cpu: Add a "tsx=" cmdline option with TSX disabled by default") Signed-off-by:
Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
Neelima Krishnan <neelima.krishnan@intel.com> Reviewed-by:
Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by:
Josh Poimboeuf <jpoimboe@redhat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/2529b99546294c893dfa1c89e2b3e46da3369a59.1578685425.git.pawan.kumar.gupta@linux.intel.comSigned-off-by:
-
Johan Hovold authored
[ Upstream commit 1b257870 ] Make sure to use the current alternate setting, which need not be the first one by index, when verifying the endpoint descriptors and initialising the URBs. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: 26ff6313 ("[media] Add support for the IguanaWorks USB IR Transceiver") Fixes: ab1cbdf1 ("media: iguanair: add sanity checks") Cc: stable <stable@vger.kernel.org> # 3.6 Cc: Oliver Neukum <oneukum@suse.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
