- 20 Feb, 2019 40 commits
-
-
Mauro Ciancio authored
commit 7ad222b3 upstream. This adds ELAN0617 to the ACPI table to support Elan touchpad found in Lenovo V330-15ISK. Signed-off-by:
Mauro Ciancio <mauro@acadeu.com> Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dmitry Torokhov authored
commit f420c54e upstream. This reverts commit 7db54c89 as it breaks Acer Aspire V-371 and other devices. According to Elan: "Acer Aspire F5-573G is MS Precision touchpad which should use hid multitouch driver. ELAN0501 should not be added in elan_i2c." Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202503 Cc: stable@vger.kernel.org Signed-off-by:
-
Ross Lagerwall authored
[ Upstream commit 92a8109e ] The code tries to allocate a contiguous buffer with a size supplied by the server (maxBuf). This could fail if memory is fragmented since it results in high order allocations for commonly used server implementations. It is also wasteful since there are probably few locks in the usual case. Limit the buffer to be no larger than a page to avoid memory allocation failures due to fragmentation. Signed-off-by:
Ross Lagerwall <ross.lagerwall@citrix.com> Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Ilia Mirkin authored
[ Upstream commit a5176a4c ] Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108980Signed-off-by:
Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit 11878006 ] When a fan is controlled via linear fallback without cstate, we shouldn't stop polling. Otherwise it won't be adjusted again and keeps running at an initial crazy pace. Fixes: 800efb4c ("drm/nouveau/drm/therm/fan: add a fallback if no fan control is specified in the vbios") Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1103356 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107447Reported-by:
Thomas Blume <thomas.blume@suse.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Reviewed-by:
Martin Peres <martin.peres@free.fr> Signed-off-by:
-
Nicholas Mc Guire authored
[ Upstream commit df209c43 ] devm_kzalloc(), devm_kstrdup() and devm_kasprintf() all can fail internal allocation and return NULL. Using any of the assigned objects without checking is not safe. As this is early in the boot phase and these allocations really should not fail, any failure here is probably an indication of a more serious issue so it makes little sense to try and rollback the previous allocated resources or try to continue; but rather the probe function is simply exited with -ENOMEM. Signed-off-by:
Nicholas Mc Guire <hofrat@osadl.org> Fixes: 684284b6 ("ARM: integrator: add MMCI device to IM-PD1") Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Linus Walleij authored
[ Upstream commit b5f03484 ] These two lines are active high, not active low. The bug was found when we changed the kernel to respect the polarity defined in the device tree. Fixes: 1b90e06b ("ARM: kirkwood: Use devicetree to define DNS-32[05] fan") Cc: Jamie Lentin <jm@lentin.co.uk> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@bootlin.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Julien D'Ascenzio <jdascenzio@posteo.net> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Tested-by:
Jamie Lentin <jm@lentin.co.uk> Reported-by:
Julien D'Ascenzio <jdascenzio@posteo.net> Tested-by:
Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by:
-
Peter Ujfalusi authored
[ Upstream commit c25748ac ] To avoid the following error: asoc-simple-card sound: ASoC: Failed to create card debugfs directory Which is because the card name contains '/' character, which can not be used in file or directory names. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
-
Peter Ujfalusi authored
[ Upstream commit 7fca69d4 ] To avoid the following error: asoc-simple-card sound: ASoC: Failed to create card debugfs directory Which is because the card name contains '/' character, which can not be used in file or directory names. Signed-off-by:
-
Liviu Dudau authored
[ Upstream commit cc667f6d ] When using HMB the PCIe host driver allocates host_mem_desc_bufs using dma_alloc_attrs() but frees them using dma_free_coherent(). Use the correct dma_free_attrs() function to free the buffers. Signed-off-by:
Liviu Dudau <liviu@dudau.co.uk> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Tomi Valkeinen authored
[ Upstream commit 7923e09c ] The H and V syncs of the DP output are always set to active high. This patch fixes the syncs by configuring them according to the videomode. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
-
Tomi Valkeinen authored
[ Upstream commit 51b9e62e ] The current driver accepts any videomode with pclk < 154MHz. This is not correct, as with 1 lane and/or 1.62Mbps speed not all videomodes can be supported. Add code to reject modes that require more bandwidth that is available. Signed-off-by:
-
Tomi Valkeinen authored
[ Upstream commit 9a63bd6f ] Initially DP0_SRCCTRL is set to a static value which includes DP0_SRCCTRL_LANES_2 and DP0_SRCCTRL_BW27, even when only 1 lane of 1.62Gbps speed is used. DP1_SRCCTRL is configured to a magic number. This patch changes the configuration as follows: Configure DP0_SRCCTRL by using tc_srcctrl() which provides the correct value. DP1_SRCCTRL needs two bits to be set to the same value as DP0_SRCCTRL: SSCG and BW27. All other bits can be zero. Signed-off-by:
-
Tomi Valkeinen authored
[ Upstream commit 4d9d54a7 ] PHY_2LANE bit is always set in DP_PHY_CTRL, breaking 1 lane use. Set PHY_2LANE only when 2 lanes are used. Signed-off-by:
-
Tomi Valkeinen authored
[ Upstream commit adf41098 ] DP1_SRCCTRL register and PHY_2LANE field did not have matching defines. Add these. Signed-off-by:
-
Sudeep Holla authored
[ Upstream commit 2f661962 ] cpuinfo_cur_freq gets current CPU frequency as detected by hardware while scaling_cur_freq last known CPU frequency. Some platforms may not allow checking the CPU frequency of an offline CPU or the associated resources may have been released via cpufreq_exit when the CPU gets offlined, in which case the policy would have been invalidated already. If we attempt to get current frequency from the hardware, it may result in hang or crash. For example on Juno, I see: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000188 [0000000000000188] pgd=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 5 PID: 4202 Comm: cat Not tainted 4.20.0-08251-ga0f2c0318a15-dirty #87 Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform pstate: 40000005 (nZcv daif -PAN -UAO) pc : scmi_cpufreq_get_rate+0x34/0xb0 lr : scmi_cpufreq_get_rate+0x34/0xb0 Call trace: scmi_cpufreq_get_rate+0x34/0xb0 __cpufreq_get+0x34/0xc0 show_cpuinfo_cur_freq+0x24/0x78 show+0x40/0x60 sysfs_kf_seq_show+0xc0/0x148 kernfs_seq_show+0x44/0x50 seq_read+0xd4/0x480 kernfs_fop_read+0x15c/0x208 __vfs_read+0x60/0x188 vfs_read+0x94/0x150 ksys_read+0x6c/0xd8 __arm64_sys_read+0x24/0x30 el0_svc_common+0x78/0x100 el0_svc_handler+0x38/0x78 el0_svc+0x8/0xc ---[ end trace 3d1024e58f77f6b2 ]--- So fix the issue by checking if the policy is invalid early in __cpufreq_get before attempting to get the current frequency. Signed-off-by:
Sudeep Holla <sudeep.holla@arm.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
[ Upstream commit 03fa4838 ] Some kernels, like 4.19.13-300.fc29.x86_64 in fedora 29, fail with the existing probe definition asking for the contents of result->name, working when we ask for the 'filename' variable instead, so add a fallback to that. Now those tests are back working on fedora 29 systems with that kernel: # perf test vfs_getname 65: Use vfs_getname probe to get syscall args filenames : Ok 66: Add vfs_getname probe to get syscall args filenames : Ok 67: Check open filename arg using perf trace + vfs_getname: Ok # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-klt3n0i58dfqttveti09q3fi@git.kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Chao Fan authored
[ Upstream commit b9ced18a ] The addresses of NUMA nodes are not printed correctly on i386-PAE which is misleading. Here is a debian9-32bit with PAE in a QEMU guest having more than 4G of memory: qemu-system-i386 \ -hda /var/lib/libvirt/images/debian32.qcow2 \ -m 5G \ -enable-kvm \ -smp 10 \ -numa node,mem=512M,nodeid=0,cpus=0 \ -numa node,mem=512M,nodeid=1,cpus=1 \ -numa node,mem=512M,nodeid=2,cpus=2 \ -numa node,mem=512M,nodeid=3,cpus=3 \ -numa node,mem=512M,nodeid=4,cpus=4 \ -numa node,mem=512M,nodeid=5,cpus=5 \ -numa node,mem=512M,nodeid=6,cpus=6 \ -numa node,mem=512M,nodeid=7,cpus=7 \ -numa node,mem=512M,nodeid=8,cpus=8 \ -numa node,mem=512M,nodeid=9,cpus=9 \ -serial stdio Because of the wrong value type, it prints as below: [ 0.021049] ACPI: SRAT Memory (0x0 length 0xa0000) in proximity domain 0 enabled [ 0.021740] ACPI: SRAT Memory (0x100000 length 0x1ff00000) in proximity domain 0 enabled [ 0.022425] ACPI: SRAT Memory (0x20000000 length 0x20000000) in proximity domain 1 enabled [ 0.023092] ACPI: SRAT Memory (0x40000000 length 0x20000000) in proximity domain 2 enabled [ 0.023764] ACPI: SRAT Memory (0x60000000 length 0x20000000) in proximity domain 3 enabled [ 0.024431] ACPI: SRAT Memory (0x80000000 length 0x20000000) in proximity domain 4 enabled [ 0.025104] ACPI: SRAT Memory (0xa0000000 length 0x20000000) in proximity domain 5 enabled [ 0.025791] ACPI: SRAT Memory (0x0 length 0x20000000) in proximity domain 6 enabled [ 0.026412] ACPI: SRAT Memory (0x20000000 length 0x20000000) in proximity domain 7 enabled [ 0.027118] ACPI: SRAT Memory (0x40000000 length 0x20000000) in proximity domain 8 enabled [ 0.027802] ACPI: SRAT Memory (0x60000000 length 0x20000000) in proximity domain 9 enabled The upper half of the start address of the NUMA domains between 6 and 9 inclusive was cut, so the printed values are incorrect. Fix the value type, to get the correct values in the log as follows: [ 0.023698] ACPI: SRAT Memory (0x0 length 0xa0000) in proximity domain 0 enabled [ 0.024325] ACPI: SRAT Memory (0x100000 length 0x1ff00000) in proximity domain 0 enabled [ 0.024981] ACPI: SRAT Memory (0x20000000 length 0x20000000) in proximity domain 1 enabled [ 0.025659] ACPI: SRAT Memory (0x40000000 length 0x20000000) in proximity domain 2 enabled [ 0.026317] ACPI: SRAT Memory (0x60000000 length 0x20000000) in proximity domain 3 enabled [ 0.026980] ACPI: SRAT Memory (0x80000000 length 0x20000000) in proximity domain 4 enabled [ 0.027635] ACPI: SRAT Memory (0xa0000000 length 0x20000000) in proximity domain 5 enabled [ 0.028311] ACPI: SRAT Memory (0x100000000 length 0x20000000) in proximity domain 6 enabled [ 0.028985] ACPI: SRAT Memory (0x120000000 length 0x20000000) in proximity domain 7 enabled [ 0.029667] ACPI: SRAT Memory (0x140000000 length 0x20000000) in proximity domain 8 enabled [ 0.030334] ACPI: SRAT Memory (0x160000000 length 0x20000000) in proximity domain 9 enabled Signed-off-by:
Chao Fan <fanc.fnst@cn.fujitsu.com> [ rjw: Subject & changelog ] Signed-off-by:
-
Daniel Axtens authored
commit 8914a595 upstream If a bnx2x card is passed a GSO packet with a gso_size larger than ~9700 bytes, it will cause a firmware error that will bring the card down: bnx2x: [bnx2x_attn_int_deasserted3:4323(enP24p1s0f0)]MC assert! bnx2x: [bnx2x_mc_assert:720(enP24p1s0f0)]XSTORM_ASSERT_LIST_INDEX 0x2 bnx2x: [bnx2x_mc_assert:736(enP24p1s0f0)]XSTORM_ASSERT_INDEX 0x0 = 0x00000000 0x25e43e47 0x00463e01 0x00010052 bnx2x: [bnx2x_mc_assert:750(enP24p1s0f0)]Chip Revision: everest3, FW Version: 7_13_1 ... (dump of values continues) ... Detect when the mac length of a GSO packet is greater than the maximum packet size (9700 bytes) and disable GSO. Signed-off-by:
Daniel Axtens <dja@axtens.net> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> [jwang: cherry pick for CVE-2018-1000026] Signed-off-by:
Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by:
-
Daniel Axtens authored
commit 2b16f048 upstream If you take a GSO skb, and split it into packets, will the MAC length (L2 + L3 + L4 headers + payload) of those packets be small enough to fit within a given length? Move skb_gso_mac_seglen() to skbuff.h with other related functions like skb_gso_network_seglen() so we can use it, and then create skb_gso_validate_mac_len to do the full calculation. Signed-off-by:
-
Russell King authored
Commit d6951f58 upstream. The intention in the previous patch was to only place the processor tables in the .rodata section if big.Little was being built and we wanted the branch target hardening, but instead (due to the way it was tested) it ended up always placing the tables into the .rodata section. Although harmless, let's correct this anyway. Fixes: 3a4d0c21 ("ARM: ensure that processor vtables is not lost after boot") Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
David A. Long <dave.long@linaro.org> Reviewed-by:
Julien Thierry <julien.thierry@arm.com> Tested-by:
-
Russell King authored
Commit 3a4d0c21 upstream. Marek Szyprowski reported problems with CPU hotplug in current kernels. This was tracked down to the processor vtables being located in an init section, and therefore discarded after kernel boot, despite being required after boot to properly initialise the non-boot CPUs. Arrange for these tables to end up in .rodata when required. Reported-by:
Marek Szyprowski <m.szyprowski@samsung.com> Tested-by:
Krzysztof Kozlowski <krzk@kernel.org> Fixes: 383fb3ee ("ARM: spectre-v2: per-CPU vtables to work around big.Little systems") Signed-off-by:
-
Russell King authored
Commit 383fb3ee upstream. In big.Little systems, some CPUs require the Spectre workarounds in paths such as the context switch, but other CPUs do not. In order to handle these differences, we need per-CPU vtables. We are unable to use the kernel's per-CPU variables to support this as per-CPU is not initialised at times when we need access to the vtables, so we have to use an array indexed by logical CPU number. We use an array-of-pointers to avoid having function pointers in the kernel's read/write .data section. Reviewed-by:
-
Russell King authored
Commit e209950f upstream. Allow the way we access members of the processor vtable to be changed at compile time. We will need to move to per-CPU vtables to fix the Spectre variant 2 issues on big.Little systems. However, we have a couple of calls that do not need the vtable treatment, and indeed cause a kernel warning due to the (later) use of smp_processor_id(), so also introduce the PROC_TABLE macro for these which always use CPU 0's function pointers. Reviewed-by:
-
Russell King authored
Commit 945aceb1 upstream. Call the per-processor type check_bugs() method in the same way as we do other per-processor functions - move the "processor." detail into proc-fns.h. Reviewed-by:
-
Russell King authored
Commit 65987a85 upstream. Split out the lookup of the processor type and associated error handling from the rest of setup_processor() - we will need to use this in the secondary CPU bringup path for big.Little Spectre variant 2 mitigation. Reviewed-by:
-
Russell King authored
Commit 899a42f8 upstream. Move lookup_processor_type() out of the __init section so it is callable from (eg) the secondary startup code during hotplug. Reviewed-by:
-
Julien Thierry authored
Commit 5df7a99b upstream. In vfp_preserve_user_clear_hwstate, ufp_exc->fpinst2 gets assigned to itself. It should actually be hwstate->fpinst2 that gets assigned to the ufp_exc field. Fixes commit 3aa2df6e ("ARM: 8791/1: vfp: use __copy_to_user() when saving VFP state"). Reported-by:
David Binderman <dcb314@hotmail.com> Signed-off-by:
-
Julien Thierry authored
Commit a1d09e07 upstream. Sanitize user pointer given to __copy_to_user, both for standard version and memcopy version of the user accessor. Signed-off-by:
-
Julien Thierry authored
Commit afaf6838 upstream. Introduce C and asm helpers to sanitize user address, taking the address range they target into account. Use asm helper for existing sanitization in __copy_from_user(). Signed-off-by:
-
Julien Thierry authored
Commit e3aa6243 upstream. When Spectre mitigation is required, __put_user() needs to include check_uaccess. This is already the case for put_user(), so just make __put_user() an alias of put_user(). Signed-off-by:
-
Julien Thierry authored
Commit 621afc67 upstream. A mispredicted conditional call to set_fs could result in the wrong addr_limit being forwarded under speculation to a subsequent access_ok check, potentially forming part of a spectre-v1 attack using uaccess routines. This patch prevents this forwarding from taking place, but putting heavy barriers in set_fs after writing the addr_limit. Porting commit c2f0ad4f ("arm64: uaccess: Prevent speculative use of the current addr_limit"). Signed-off-by:
-
Julien Thierry authored
Commit 18ea66bd upstream. With Spectre-v1.1 mitigations, __put_user_error is pointless. In an attempt to remove it, replace its references in frame setups with __put_user. Signed-off-by:
-
Julien Thierry authored
Commit 31950890 upstream. Copy events to user using __copy_to_user() rather than copy members of individually with __put_user_error(). This has the benefit of disabling/enabling PAN once per event intead of once per event member. Signed-off-by:
-
Julien Thierry authored
Commit 3aa2df6e upstream. Use __copy_to_user() rather than __put_user_error() for individual members when saving VFP state. This has the benefit of disabling/enabling PAN once per copied struct intead of once per write. Signed-off-by:
-
Julien Thierry authored
Commit 73839798 upstream. When setting a dummy iwmmxt context, create a local instance and use __copy_to_user both cases whether iwmmxt is being used or not. This has the benefit of disabling/enabling PAN once for the whole copy intead of once per write. Signed-off-by:
-
Julien Thierry authored
Commit 5ca451cf upstream. When saving the ARM integer registers, use __copy_to_user() to copy them into user signal frame, rather than __put_user_error(). This has the benefit of disabling/enabling PAN once for the whole copy intead of once per write. Signed-off-by:
-
Hauke Mehrtens authored
commit 6926e041 upstream. Musl provides its own ethhdr struct definition. Add a guard to prevent its definition of the appropriate musl header has already been included. glibc does not implement this header, but when glibc will implement this they can just define __UAPI_DEF_ETHHDR 0 to make it work with the kernel. Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
-
Jianchao Wang authored
[ Upstream commit 85bd6e61 ] Florian reported a io hung issue when fsync(). It should be triggered by following race condition. data + post flush a flush blk_flush_complete_seq case REQ_FSEQ_DATA blk_flush_queue_rq issued to driver blk_mq_dispatch_rq_list try to issue a flush req failed due to NON-NCQ command .queue_rq return BLK_STS_DEV_RESOURCE request completion req->end_io // doesn't check RESTART mq_flush_data_end_io case REQ_FSEQ_POSTFLUSH blk_kick_flush do nothing because previous flush has not been completed blk_mq_run_hw_queue insert rq to hctx->dispatch due to RESTART is still set, do nothing To fix this, replace the blk_mq_run_hw_queue in mq_flush_data_end_io with blk_mq_sched_restart to check and clear the RESTART flag. Fixes: bd166ef1 (blk-mq-sched: add framework for MQ capable IO schedulers) Reported-by:
Florian Stecker <m19@florianstecker.de> Tested-by:
Jianchao Wang <jianchao.w.wang@oracle.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Adrian Bunk authored
commit 37cf28d3 upstream. Works with ST M24M02. Signed-off-by:
Adrian Bunk <bunk@kernel.org> Signed-off-by:
Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by:
-
