fib_check_nh is currently huge covering multiple uses cases - device only,
device + gateway, and device + gateway with ONLINK. The next patch adds
validation checks for IPv6 which only further complicates it. So, break
fib_check_nh into 2 helpers - one for gateway validation and one for device
only.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for an IPv6 gateway to fib_config. Since a gateway is either
IPv4 or IPv6, make it a union with fc_gw4 where fc_gw_family decides
which address is in use. Update current checks on family and gw4 to
handle ipv6 as well.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for an IPv6 gateway to rtable. Since a gateway is either
IPv4 or IPv6, make it a union with rt_gw4 where rt_gw_family decides
which address is in use.

When dumping the route data, encode an ipv6 nexthop using RTA_VIA.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Similar to rtable, fib_config needs to allow the gateway to be either an
IPv4 or an IPv6 address. To that end, rename fc_gw to fc_gw4 to mean an
IPv4 address and add fc_gw_family. Checks on 'is a gateway set' are changed
to see if fc_gw_family is set. In the process prepare the code for a
fc_gw_family == AF_INET6.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

To allow the gateway to be either an IPv4 or IPv6 address, remove
rt_uses_gateway from rtable and replace with rt_gw_family. If
rt_gw_family is set it implies rt_uses_gateway. Rename rt_gateway
to rt_gw4 to represent the IPv4 version.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Allow the gateway in a fib_nh_common to be from a different address
family than the outer fib{6}_nh. To that end, replace nhc_has_gw with
nhc_gw_family and update users of nhc_has_gw to check nhc_gw_family.
Now nhc_family is used to know if the nh_common is part of a fib_nh
or fib6_nh (used for container_of to get to route family specific data),
and nhc_gw_family represents the address family for the gateway.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add ipv6 helpers to handle ndisc references via the stub. Update
bpf_ipv6_fib_lookup to use __ipv6_neigh_lookup_noref_stub instead of
the open code ___neigh_lookup_noref with the stub.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add fib6_nh_init and fib6_nh_release to ipv6_stubs. If fib6_nh_init fails,
callers should not invoke fib6_nh_release, so there is no reason to have
a dummy stub for the IPv6 is not enabled case.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

genphy_read_status() so far checks phydev->supported, not the actual
PHY capabilities. This can make a difference if the supported speeds
have been limited by of_set_phy_supported() or phy_set_max_speed().

It seems that this issue only affects the link partner advertisements
as displayed by ethtool. Also this patch wouldn't apply to older
kernels because linkmode bitmaps have been introduced recently.
Therefore net-next.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mamameed says:

====================
mlx5-updates-2019-04-02

This series provides misc updates to mlx5 driver

1) Aya Levin (1): Handle event of power detection in the PCIE slot

2) Eli Britstein (6):
  Some TC VLAN related updates and fixes to the previous VLAN modify action
  support patchset.
  Offload TC e-switch rules with egress/ingress VLAN devices

3) Max Gurtovoy (1): Fix double mutex initialization in esiwtch.c

4) Tariq Toukan (3): Misc small updates
  A write memory barrier is sufficient in EQ ci update
  Obsolete param field holding a constant value
  Unify logic of MTU boundaries

5) Tonghao Zhang (4): Misc updates to en_tc.c
  Make the log friendly when decapsulation offload not supported
  Remove 'parse_attr' argument in parse_tc_fdb_actions()
  Deletes unnecessary setting of esw_attr->parse_attr
  Return -EOPNOTSUPP when attempting to offload an unsupported action
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

During hash filter programming, driver needs to return ENOSPC error
intead of EAGAIN when TCAM is full.
Signed-off-by: Vishal Kulkarni <vishal@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This hook only implements a minimal set of ioctl hooks to be able to access
MII regs by using phytool.
When using this simple MAC controller, it's pretty difficult to do
debugging of the PHY chip without checking MII regs.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This set adds a minimal set of ethtool hooks to the driver, which provide a
decent amount of link information via ethtool.
With this change, running `ethtool ethX` in user-space provides all the
neatly-formatted information about the link (what was negotiated, what is
advertised, etc).
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After commit a297569f ("net/udp: do not touch skb->peeked unless
really needed") the 'peeked' argument of __skb_try_recv_datagram()
and friends is always equal to !!'flags & MSG_PEEK'.

Since such argument is really a boolean info, and the callers have
already 'flags & MSG_PEEK' handy, we can remove it and clean-up the
code a bit.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

John reports:

Recent refactoring of fl_change aims to use the classifier spinlock to
avoid the need for rtnl lock. In doing so, the fl_hw_replace_filer()
function was moved to before the lock is taken. This can create problems
for drivers if duplicate filters are created (commmon in ovs tc offload
due to filters being triggered by user-space matches).

Drivers registered for such filters will now receive multiple copies of
the same rule, each with a different cookie value. This means that the
drivers would need to do a full match field lookup to determine
duplicates, repeating work that will happen in flower __fl_lookup().
Currently, drivers do not expect to receive duplicate filters.

To fix this, verify that filter with same key is not present in flower
classifier hash table and insert the new filter to the flower hash table
before offloading it to hardware. Implement helper function
fl_ht_insert_unique() to atomically verify/insert a filter.

This change makes filter visible to fast path at the beginning of
fl_change() function, which means it can no longer be freed directly in
case of error. Refactor fl_change() error handling code to deallocate the
filter with rcu timeout.

Fixes: 620da486 ("net: sched: flower: refactor fl_change")
Reported-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

NeilBrown says:

====================
Convert rhashtable to use bitlocks

This series converts rhashtable to use a per-bucket bitlock
rather than a separate array of spinlocks.
This:
  reduces memory usage
  results in slightly fewer memory accesses
  slightly improves parallelism
  makes a configuration option unnecessary

The main change from previous version is to use a distinct type for
the pointer in the bucket which has a bit-lock in it.  This
helped find two places where rht_ptr() was missed, one
in  rhashtable_free_and_destroy() in print_ht in the test code.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Native bit_spin_locks are not tracked by lockdep.

The bit_spin_locks used for rhashtable buckets are local
to the rhashtable implementation, so there is little opportunity
for the sort of misuse that lockdep might detect.
However locks are held while a hash function or compare
function is called, and if one of these took a lock,
a misbehaviour is possible.

As it is quite easy to add lockdep support this unlikely
possibility seems to be enough justification.

So create a lockdep class for bucket bit_spin_lock and attach
through a lockdep_map in each bucket_table.

Without the 'nested' annotation in rhashtable_rehash_one(), lockdep
correctly reports a possible problem as this lock is taken
while another bucket lock (in another table) is held.  This
confirms that the added support works.
With the correct nested annotation in place, lockdep reports
no problems.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch changes rhashtables to use a bit_spin_lock on BIT(1) of the
bucket pointer to lock the hash chain for that bucket.

The benefits of a bit spin_lock are:
 - no need to allocate a separate array of locks.
 - no need to have a configuration option to guide the
   choice of the size of this array
 - locking cost is often a single test-and-set in a cache line
   that will have to be loaded anyway.  When inserting at, or removing
   from, the head of the chain, the unlock is free - writing the new
   address in the bucket head implicitly clears the lock bit.
   For __rhashtable_insert_fast() we ensure this always happens
   when adding a new key.
 - even when lockings costs 2 updates (lock and unlock), they are
   in a cacheline that needs to be read anyway.

The cost of using a bit spin_lock is a little bit of code complexity,
which I think is quite manageable.

Bit spin_locks are sometimes inappropriate because they are not fair -
if multiple CPUs repeatedly contend of the same lock, one CPU can
easily be starved.  This is not a credible situation with rhashtable.
Multiple CPUs may want to repeatedly add or remove objects, but they
will typically do so at different buckets, so they will attempt to
acquire different locks.

As we have more bit-locks than we previously had spinlocks (by at
least a factor of two) we can expect slightly less contention to
go with the slightly better cache behavior and reduced memory
consumption.

To enhance type checking, a new struct is introduced to represent the
  pointer plus lock-bit
that is stored in the bucket-table.  This is "struct rhash_lock_head"
and is empty.  A pointer to this needs to be cast to either an
unsigned lock, or a "struct rhash_head *" to be useful.
Variables of this type are most often called "bkt".

Previously "pprev" would sometimes point to a bucket, and sometimes a
->next pointer in an rhash_head.  As these are now different types,
pprev is NULL when it would have pointed to the bucket. In that case,
'blk' is used, together with correct locking protocol.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rather than returning a pointer to a static nulls, rht_bucket_var()
now returns NULL if the bucket doesn't exist.
This will make the next patch, which stores a bitlock in the
bucket pointer, somewhat cleaner.

This change involves introducing __rht_bucket_nested() which is
like rht_bucket_nested(), but doesn't provide the static nulls,
and changing rht_bucket_nested() to call this and possible
provide a static nulls - as is still needed for the non-var case.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nested_table_alloc() relies on the fact that there is
at most one spinlock allocated for every slot in the top
level nested table, so it is not possible for two threads
to try to allocate the same table at the same time.

This assumption is a little fragile (it is not explicit) and is
unnecessary as cmpxchg() can be used instead.

A future patch will replace the spinlocks by per-bucket bitlocks,
and then we won't be able to protect the slot pointer with a spinlock.

So replace rcu_assign_pointer() with cmpxchg() - which has equivalent
barrier properties.
If it the cmp fails, free the table that was just allocated.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Murali Karicheri says:

====================
net: hsr: improvements and bug fixes

This series has some coding style fixes and other bug fixes.
Patch 12/14, I have also done SPDX conversion. Not sure if
that is the only thing needed and is correct. So please pay
close attention to this patch before merge as I would like to
avoid any issue related to licensing applicable for this code.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

HSR should forget nodes after configured node forget time expiry based
on HSR_NODE_FORGET_TIME. As part of hsr_prune_nodes(), code checks to
see if entries are to be flushed out if not heard for longer than forget
time. But currently hsr_prune_nodes() is called only once during device
creation. Restart the timer at the end of hsr_prune_nodes() so that
hsr_prune_nodes() gets called periodically and forgotten entries are
removed from node table.
Signed-off-by: Aaron Kramer <a-kramer@ti.com>
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This adds a debugfs interface to allow display the nodes learned
by the hsr master.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use SPDX-License-Identifier instead of a verbose license text.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a blank line after function declaration as suggested by
checkpatch.pl -f
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Current driver code uses camel case in many places. This is
seen when ran checkpatch.pl -f on files under net/hsr. This
patch fixes the code to remove camel case usage.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch add missing space around operator in code. This is
seen when ran checkpatch.pl -f on files under net/hsr.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In a multi-line statement exceeding 80 characters, logical operator
should be at the end of a line instead of being at the start. This
is seen when ran checkpatch.pl -f on files under net/hsr. The change
is per suggestion from checkpatch.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch removes unnecessary space after a cast. This is seen
when ran checkpatch.pl -f on files under net/hsr.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch replaces all instance of NULL checks such as
    if (foo == NULL) with if (!foo)
Also
    if (foo != NULL) with if (foo)

This is seen when ran checkpatch.pl -f on files under net/hsr
and suggestion is to replace as above.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes function calls that ends with '(' in a line.
This is seen when ran checkpatch.pl -f option on files under
net/hsr.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes alignment issues in code for functions. This is
seen when ran checkpatch.pl -f option on files under net/hsr.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes unnecessary paranthesis from the code. This is
seen when ran checkpatch.pl -f option on files under net/hsr.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes multiple blank lines in the code. This is seen
when ran checkpatch.pl -f option for files under net/hsr
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes lines exceeding 80 characters. This is seen
when ran checkpatch.pl with -f option for files under
net/hsr.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This test is split in two, the first part checks if a report creates a
corresponding mdb entry and if traffic is properly forwarded to it, and
the second part checks if the mdb entry is deleted after a leave and
if traffic is *not* forwarded to it. Since the mcast querier is enabled
we should see standard mcast snooping bridge behaviour.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently mskid is unsigned and hence comparisons with negative
error return values are always false. Fix this by making mskid an
int.

Fixes: f058e468 ("net: hns: fix ICMP6 neighbor solicitation messages discard problem")
Addresses-Coverity: ("Operands don't affect result")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Mario Limonciello says:

====================
r8152: Support runtime changes of vendor mac passthu policy

On some platforms ACPI method `\\_SB.AMAC` is dynamic and changes to it can
influence changing the behavior of MAC pass through and what MAC address is used.

When running USB reset, re-read the MAC address to use to support tools that
change the policy.

This is quite similar to using `SIOCSIFHWADDR` except that the actual MAC to use
comes from ASL rather than from userspace.

Changes from v1:
 * Remove an extra unneeded `ether_addr_copy` call
 * Use `dev_set_mac_address` to ensure all notifiers are called
 * Shuffle functions to allow code re-use.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

On some platforms it is possible to dynamically change the policy
of what MAC address is selected from the ASL at runtime.

These tools will reset the USB device and expect the change to be
made immediately.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This already happens later on in `rtl8152_set_mac_address`
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>