- 17 Aug, 2023 12 commits
-
-
Mark Brown authored
Merge series from Linus Walleij <linus.walleij@linaro.org>: After dropping unused headers a few Realtek devices actually using the GPIO descriptors remain. Converting them to use optional GPIO descriptors is pretty straight-forward.
-
Linus Walleij authored
Convert the RT5682S to use GPIO descriptors and drop the legacy GPIO headers. We remove the global GPIO number from the platform data, but it is still possible to create board files using GPIO descriptor tables, if desired. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230817-descriptors-asoc-rt-v2-5-02fa2ca3e5b0@linaro.orgSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Linus Walleij authored
Convert the RT5682 to use GPIO descriptors and drop the legacy GPIO headers. We remove the global GPIO number from the platform data, but it is still possible to create board files using GPIO descriptor tables, if desired. Make sure to make sure SDW devices can associate with an LDO1 EN descriptor too, if they so desire by putting the lookup into the common code. Signed-off-by:
-
Linus Walleij authored
Convert the RT5668 to use GPIO descriptors and drop the legacy GPIO headers. We remove the global GPIO number from the platform data, but it is still possible to create board files using GPIO descriptor tables, if desired. Signed-off-by:
-
Linus Walleij authored
The RT5665 driver has some stub support for GPIO descriptors going back to the initial driver commit, where there are two GPIO descriptors for the LDO and headphone detection defined in the device state. Well, let's make use of the descriptor properly. We remove the global GPIO number from the platform data, but it is still possible to create board files using GPIO descriptor tables, if desired. Signed-off-by:
-
Linus Walleij authored
The RT5640 driver is already using GPIO descriptors for some stuff, all that is needed is to convert the remaining LDO1 control line to also use descriptors. Simplify the code using gpiod_get_optional() and drop the special "of" parsing function: these descriptors need not come from device tree and it's optional so hey. Keep some NULL checks around the GPIO operations even though gpiolib is essentially NULL-tolerant, because by checking for whether we have a valid GPIO descriptor or not we can avoid a 400 ms delay which is great. Signed-off-by:
-
Maso Huang authored
Add mt7986 audio afe document. Signed-off-by:
Maso Huang <maso.huang@mediatek.com> Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230817101338.18782-7-maso.huang@mediatek.comSigned-off-by:
-
Maso Huang authored
Add document for mt7986 board with wm8960. Signed-off-by:
-
Maso Huang authored
Add support for mt7986 board with wm8960. Signed-off-by:
-
Maso Huang authored
Add mt7986 platform driver. Signed-off-by:
-
Maso Huang authored
Add mt7986 etdm dai driver support. Signed-off-by:
-
Maso Huang authored
Add header files for register definition and structure. Signed-off-by:
-
- 16 Aug, 2023 11 commits
-
-
Krzysztof Kozlowski authored
Parse generic sound card "audio-routing" property and fallback to "samsung,audio-routing" if it is missing. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230810063300.20151-11-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Krzysztof Kozlowski authored
Parse generic sound card "audio-routing" property and fallback to "samsung,audio-routing" if it is missing. Signed-off-by:
-
Krzysztof Kozlowski authored
Parse generic sound card "audio-routing" property and fallback to "samsung,audio-routing" if it is missing. Signed-off-by:
-
Krzysztof Kozlowski authored
Parse generic sound card "audio-routing" property and fallback to "samsung,audio-routing" if it is missing. Signed-off-by:
-
Krzysztof Kozlowski authored
"samsung,audio-widgets" and "samsung,audio-routing" are not boolean properties, thus more appropriate is to use of_property_present() to check if they are present. Signed-off-by:
-
Krzysztof Kozlowski authored
Reference the common sound card properties and deprecate the custom "samsung,audio-routing" in favor of generic one. This allows to remove "model" property and make the binding closer to other sounds cards. Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Krzysztof Kozlowski authored
Reference the common sound card properties and deprecate the custom "samsung,audio-routing" in favor of generic one. This allows to remove "model" property and make the binding closer to other sounds cards. Reviewed-by:
-
Krzysztof Kozlowski authored
Reference the common sound card properties and deprecate the custom "samsung,audio-routing" in favor of generic one. This allows to remove "model" property and make the binding closer to other sounds cards. Reviewed-by:
-
Krzysztof Kozlowski authored
Reference the common sound card properties and deprecate the custom "samsung,audio-routing" in favor of generic one. This allows to remove "model" property and make the binding closer to other sounds cards. Reviewed-by:
-
Krzysztof Kozlowski authored
The mediatek,mt8188-mt6359 Linux sound machine driver requires the "model" property, so binding was incomplete. Reference the common sound card properties to fix that which also allows to remove duplicated property definitions. Leave the relevant parts of "audio-routing" description. Reviewed-by:
Trevor Wu <trevor.wu@mediatek.com> Link: https://lore.kernel.org/r/20230810063300.20151-2-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Krzysztof Kozlowski authored
Almost every board machine / sound cards has "audio-routing" and "model" properties, so move them to common schema to have only one definition of these properties. For amlogic,gx-sound-card, drop the minItems: 2 from the "audio-routing", because any limit here - lower or upper- is rather meaningless. This will also fix `dtbs_check` warnings like: meson-gxm-s912-libretech-pc.dtb: sound: audio-routing: ['AU2 INL', 'ACODEC LOLN', 'AU2 INR', 'ACODEC LORN', '7J4-14 LEFT', 'AU2 OUTL', '7J4-11 RIGHT', 'AU2 OUTR'] is too long Reviewed-by:
-
- 15 Aug, 2023 17 commits
-
-
Vlad Karpovich authored
Before adding a new FW control, its name is checked against existing controls list. But the string length in strncmp used to compare controls names is taken from the list, so if beginnings of the controls are matching, then the new control is not created. For example, if CAL_R control already exists, CAL_R_SELECTED is not created. The fix is to compare string lengths as well. Fixes: 64779607 ("ASoC: wm_adsp: Move check for control existence") Signed-off-by:
Vlad Karpovich <vkarpovi@opensource.cirrus.com> Link: https://lore.kernel.org/r/20230815172908.3454056-1-vkarpovi@opensource.cirrus.comSigned-off-by:
-
Krzysztof Kozlowski authored
'version' is an enum, thus cast of pointer on 64-bit compile test with W=1 causes: rockchip_pdm.c:587:18: error: cast to smaller integer type 'enum rk_pdm_version' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast] Signed-off-by:
-
Krzysztof Kozlowski authored
'devtype' is an enum, thus cast of pointer on 64-bit compile test with W=1 causes: wm8904.c:2205:21: error: cast to smaller integer type 'enum wm8904_type' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast] Signed-off-by:
-
Krzysztof Kozlowski authored
'type' is an enum, thus cast of pointer on 64-bit compile test with W=1 causes: tlv320aic32x4.c:1352:18: error: cast to smaller integer type 'enum aic32x4_type' from 'void *' [-Werror,-Wvoid-pointer-to-enum-cast] Signed-off-by:
-
Mark Brown authored
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>: Use the FIRMWARE_MISSING flag in the CS35L56 to determine whether it is safe to download a firmware patch.
-
Mark Brown authored
Merge series from Li Zetao <lizetao1@huawei.com>: This patch set use the helper function devm_kmemdup() to replace devm_kmalloc + memcpy, which is the same as implementing the function separately.
-
Mark Brown authored
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: The use of the widget name as a prefix for the kcontrol name is quite useful in the case of multiple pipelines going to the same endpoint, but it's overkill in simpler cases. This patchset extends the existing DAPM code to drop the widget name prefix and make the kcontrol names simpler when there's no possible ambiguity, e.g. "gain.2.1 Main Playback Volume" becomes just "Main Playback Volume".
-
Mark Brown authored
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: 4 commits with the match tables for RaptorLake and MeteorLake devices.
-
Richard Fitzgerald authored
Only attempt to download wmfw/bin files to a non-secured part if it reports FIRMWARE_MISSING. If FIRMWARE_MISSING is false the firmware has already been patched and overwriting the patch could corrupt the running firmware. For a secured part the wmfw/bin can be downloaded even if FIRMWARE_MISSING is false, because they will only patch tunings. Signed-off-by:
Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/20230815124826.5447-3-rf@opensource.cirrus.comSigned-off-by:
-
Richard Fitzgerald authored
Add a flag to wm_adsp_power_up() that indicates whether it should attempt to find and load firmware files. This is to support DSPs that have built-in firmware that may already have been patched (for example, by the BIOS). In that case the patch must not be overwritten because that could corrupt the running firmware. Signed-off-by:
-
Chao Song authored
Existing HDA stream creation is split into two for loops for capture and playback, but most of the code in the two for loops are duplicated. This patch refactors HDA stream creation with a single for loop, thus remove code duplication. No functional change in this patch. Reviewed-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by:
Rander Wang <rander.wang@intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by:
Chao Song <chao.song@linux.intel.com> Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20230814231519.79051-1-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Pierre-Louis Bossart authored
Commit 81113108 ("ASoC: Merge up fixes") added the same code twice, remove the extra call. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20230814234235.87268-1-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Balamurugan C authored
Adding HDMI-In capture support for the RPL products doesn't have onboard I2S codec.but need to support HDMI-In capture via I2S and audio playback through HDMI/DP monitor. Reviewed-by:
Balamurugan C <balamurugan.c@intel.com> Signed-off-by:
-
Chao Song authored
This patch adds the acpi match table for Dell SKU0C87 devices, the codec layout is: SDW0: RT714 DMIC SDW1: RT1318 Speaker SDW2: RT1318 Speaker Note that there is no jack codec on SKU0C87 devices. Reviewed-by: -
Balamurugan C authored
Adding HDMI-In capture via I2S feature support in RPL platfroms. Reviewed-by:
-
Balamurugan C authored
Adding support for ES83x6 codec in RPL match table. Reviewed-by:
-
Jyri Sarha authored
Adds SOF_TKN_COMP_NO_WNAME_IN_KCONTROL_NAME token, and copies the token's tuple value to the no_wname_in_kcontrol_name flag in struct snd_soc_dapm_widget. If the tuple value for the token in the topology is true, then the widget name is not added to the mixer name. In practice "gain.2.1 Post Mixer Analog Playback Volume" becomes just "Post Mixer Analog Playback Volume". Reviewed-by:
Jyri Sarha <jyri.sarha@intel.com> Signed-off-by:
-
