- 16 Oct, 2017 13 commits
-
-
Michal Wajdeczko authored
Firmware loading for GuC and HuC are similar. Move common code into generic function for maximum reuse. v2: change message levels (Chris) Signed-off-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171016144724.17244-13-michal.wajdeczko@intel.com
-
Michal Wajdeczko authored
Some of the error messages from DMC load were too generic and may be confusing for the user. Lets explicitly add DMC words there. Also as homepage of DMC firmware is same as for the GuC and Huc, lets reuse URL definition. Signed-off-by:
-
Michal Wajdeczko authored
In case of firmware fetch failure we should help user find latest firmware. URL macro duplication from csr.c will be fixed in upcoming patch. Suggested-by:
-
Michal Wajdeczko authored
Time to remove less important info and make messages clear and consistent. v2: change some message levels (Chris) v3: restore DRM_WARN (Chris) Signed-off-by:
-
Michal Wajdeczko authored
GuC status message printed right after firmware upload may be too optimistic, as we may fail on subsequent steps. Move that message to the end of intel_uc_init_hw where we know the status for sure. v2: use dev_info (Chris) Signed-off-by:
-
Michal Wajdeczko authored
Both GuC and HuC firmwares will be moved into WOPCM so we can check ucode size early for both cases. Suggested-by:
-
Michal Wajdeczko authored
Functions should be defined in their use order. Signed-off-by:
-
Michal Wajdeczko authored
Remaining functions in intel_guc_loader.c were focused around GuC firmware. Rename them to match object-verb pattern and rename file itself. Suggested-by:
-
Michal Wajdeczko authored
After GuC code reorg some documentation was left in wrong place. Move it closer to corresponding definitions. v2: use consistent name for the GuC (Sagar) Signed-off-by:
Sagar Arun Kamble <sagar.a.kamble@intel.com> Signed-off-by:
-
Michal Wajdeczko authored
Existing code needs some style fixes. To avoid polluting pure move patch, do it now as separate step. Suggested-by:
-
Michal Wajdeczko authored
We want to keep ucode xfer functions separate from other initialization. Once separated, add explicit forcewake. v2: use BLITTER domain only and add comment (Daniele) Suggested-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
-
Michal Wajdeczko authored
Function intel_guc_wopcm_size didn't fit well in the old place. With this move upcoming cleanup will be simpler. Suggested-by:
-
Weinan Li authored
Let GVT-g VM read the CSB and CSB write pointer from virtual HWSP, not all the host support this feature, need to check the BIT(3) of caps in PVINFO. v3 : Remove unnecessary comments. v4 : Separate VM enable patch with GVT-g implementation patch due to code dependency. v5 : Use inline for GVT virtual HWSP caps check function. v6 : Comments refine. Signed-off-by:
Weinan Li <weinan.z.li@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by:
-
- 13 Oct, 2017 20 commits
-
-
Chris Wilson authored
The compiler warns: drivers/gpu/drm/i915/intel_ddi.c:118:35: warning: ‘bdw_ddi_translations_fdi’ defined but not used Lo and behold, if we look at intel_ddi_get_buf_trans_fdi(), it uses hsw_ddi_translations_fdi[] for both Haswell and *Broadwell* Fixes: 7d1c42e6 ("drm/i915: Refactor code to select the DDI buf translation table") Signed-off-by:
Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com>
-
Chris Wilson authored
Always try to stop the rings, even if the GPU reset itself has been disabled (via modparam i915.reset). This should at least stop the hw from spinning in the background consuming resources (e.g. power and memory bandwidth) letting the system rest-in-peace. References: https://bugs.freedesktop.org/show_bug.cgi?id=103260Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com>
-
Chris Wilson authored
Before modifying the ring register (RING_START, HEAD, TAIL, CTL) we first make sure it is stopped (or else the hw may not resample the registers). However, we do not need to let the hw restart until after we have reprogrammed all the rings. This should help prevent situations where pending operations on the ring may resume (because we are trying to re-initialize following an unsuccessful GPU hang, i.e. from i915_gem_unset_wedged). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103260Signed-off-by:
-
Chris Wilson authored
Since the removal of the stop_machine(), it is allowed and expected for the nop_submit_request() and nop_complete_submit_request() to run in parallel to the i915_gem_set_wedged() processing. As such we can no longer assert that i915_gem_set_wedged() has completed inside the stop_machine prior to the individual nop_submit_request execution. Fixes: af7a8ffa ("drm/i915: Use rcu instead of stop_machine in set_wedged") Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Reviewed-by:
-
Ville Syrjälä authored
Untangle intel_enable_ddi() by splitting it into DP and HDMI specific variants. v2: Keep using intel_ddi_get_encoder_port() for now Signed-off-by:
Jani Nikula <jani.nikula@intel.com>
-
Ville Syrjälä authored
Rather that plumb the link parameters separately to intel_ddi_pre_enable_dp() let's just pass the entire crtc state. intel_ddi_pre_enable_hdmi() already took the crtc state, but for some reason intel_ddi_pre_enable() still wanted to extract has_infoframe from therein and pass it in separately. Let's not do that since it's pointless. v2: Rebase due to more code getting pulled into the DDI hooks Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Ville Syrjälä authored
Untangle intel_disable_ddi() by splitting it into DP and HDMI specific variants. Signed-off-by:
-
Ville Syrjälä authored
intel_edp_panel_on() will itself do the is_edp() check, so the caller doesn't have to bother. Pre-DDI code doesn't bother, so let's follow the same approach for DDI. Reviewed-by:
-
Ville Syrjälä authored
To clean up the mess in intel_ddi_post_disable() split it into two clean variants for HDMI and DP. v2: Rebase due to MST DPMS changes Reviewed-by: Jani Nikula <jani.nikula@intel.com> #v1 Signed-off-by:
-
Ville Syrjälä authored
To untangle the mess that is intel_ddi_post_disable() move the the bits needed by FDI into intel_ddi_fdi_post_disable(). This way we can stop worrying about FDI in intel_ddi_post_disable(). Reviewed-by:
-
Ville Syrjälä authored
Extract the code to disable the DDI_BUF_CTL into small helper. This will allows us to detangle the encoder type mess in intel_ddi_post_disable(). v2: Keep using intel_ddi_get_encoder_port() for now Reviewed-by:
-
Ville Syrjälä authored
Pull the code to disable the port clock into a function. We already have the intel_ddi_clk_select() counterpart. v2: Keep using intel_ddi_get_encoder_port() for now (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Ville Syrjälä authored
To make it easier to debug things let's dump the output types bitmask in the crtc state dump. And to make life that much better, let's pretty print it as a a human reaadable string as well. v2: Have the caller pass in the buffer (Chris) #undef OUTPUT_TYPE (Jani) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: -
Harsha Sharma authored
Replace instances of drm_framebuffer_reference/unreference() with *_get/put() suffixes and drm_dev_unref with *_put() suffix because get/put is shorter and consistent with the kernel use of *_get/put suffixes. Done with following coccinelle semantic patch @@ expression ex; @@ ( -drm_framebuffer_unreference(ex); +drm_framebuffer_put(ex); | -drm_dev_unref(ex); +drm_dev_put(ex); | -drm_framebuffer_reference(ex); +drm_framebuffer_get(ex); ) Signed-off-by:
Harsha Sharma <harshasharmaiitr@gmail.com> [danvet: Drop the drm_dev_put change for now, to make the patch apply with out a backmerge.] Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20171009120643.11953-1-harshasharmaiitr@gmail.com
-
Mika Kahola authored
Favor for_each_pipe() macro when looping through pipes. Signed-off-by:
Mika Kahola <mika.kahola@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1507890286-16214-1-git-send-email-mika.kahola@intel.comSigned-off-by:
-
Shashank Sharma authored
We read the dp dual mode Adapter identifier to detect the LSPCON device. It's been observed from the CI testing that in few cases, this read can get delayed or fail. For such scenarios, LSPCON vendors suggest to retry the read operation. This patch adds retry in the probe function, while reading LSPCON identifier. V3: added this patch in the series Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102294 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102295 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102359 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103186 Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Signed-off-by:
Shashank Sharma <shashank.sharma@intel.com> Reviewed-by:
Imre Deak <imre.deak@intel.com> Signed-off-by:
-
Shashank Sharma authored
Our current logic to read LSPCON's current mode, stops retries and breaks wait-loop, if it gets LSPCON_MODE_INVALID as return from the core function. This doesn't allow us to try reading the mode again. This patch removes this condition and allows retries reading the currnt mode until timeout. This also fixes/prevents some of the noise in form of debug messages while running IGT CI test cases. V2: rebase, added r-b V2: changed some debug message levels from debug->error and error->debug in lspcon_get_current_mode function. V3: Rebase Cc: Imre Deak <imre.deak@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102294 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102295 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102359 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103186Reviewed-by:Mahesh Kumar <Mahesh1.kumar@intel.com> Signed-off-by:
-
Shashank Sharma authored
From the CI builds, its been observed that during a driver reload/insert, dp dual mode read function sometimes fails to read from LSPCON device over i2c-over-aux channel. This patch: - adds some delay and few retries, allowing a scope for these devices to settle down and respond. - changes one error log's level from ERROR->DEBUG as we want to call it an error only after all the retries are exhausted. V2: Addressed review comments from Jani (for loop for retry) V3: Addressed review comments from Imre (break on partial read too) V3: Addressed review comments from Ville/Imre (Add the retries exclusively for LSPCON, not for all dp_dual_mode devices) V4: Added r-b from Imre, sending it to dri-devel (Jani) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102294 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102295 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102359 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103186 Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by:Dave Airlie <airlied@gmail.com> Signed-off-by:
-
James Ausmus authored
Per BSpec, 400us is "BDW+ Do not use this setting." - not just PORT_A. Set BDW to 600us unconditionally. v2: -Split in to two patches (Rodrigo) Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
James Ausmus <james.ausmus@intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
James Ausmus authored
Rename DP_AUX_CH_CTL_TIME_OUT_1600us to DP_AUX_CH_CTL_TIME_OUT_MAX, as the meaning of the (3 << 26) value varies per platform, but it's always the maximum timeout for that platform. Pre-CNL it means 1600us, and for CNL it means 3200us. v2: -Split in to two patches (Rodrigo) Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
- 12 Oct, 2017 7 commits
-
-
Chris Wilson authored
A bug recently encountered involved the issue where are we were submitting requests to different ppGTT, each would pin a segment of the GGTT for its logical context and ring. However, this is invisible to eviction as we do not tie the context/ring VMA to a request and so do not automatically wait upon it them (instead they are marked as pinned, preventing eviction entirely). Instead the eviction code must flush those contexts by switching to the kernel context. This selftest tries to fill the GGTT with contexts to exercise a path where the switch-to-kernel-context failed to make forward progress and we fail with ENOSPC. v2: Make the hole in the filled GGTT explicit. v3: Swap out the arbitrary timeout for a private notification from i915_gem_evict_something() Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com>
-
Chris Wilson authored
For some selftests, we want to issue requests but delay them going to hardware. Furthermore, we don't want those requests to block indefinitely (or else we may hang the driver and block testing) so we want to employ a timeout. So naturally we want a fence that is automatically signaled by a timer. v2: Add kselftests. v3: Limit the API available to selftests; there isn't an overwhelming reason to export it universally. Signed-off-by:
-
Chris Wilson authored
In the full-ppgtt world, we can fill the GGTT full of context objects. These context objects are currently implicitly tracked by the requests that pin them i.e. they are only unpinned when the request is completed and retired, but we do not have the link from the vma to the request (anymore). In order to unpin those contexts, we have to issue another request and wait upon the switch to the kernel context. The bug during eviction was that we assumed that a full GGTT meant we would have requests on the GGTT timeline, and so we missed situations where those requests where merely in flight (and when even they have not yet been submitted to hw yet). The fix employed here is to change the already-is-idle test to no look at the execution timeline, but count the outstanding requests and then check that we have switched to the kernel context. Erring on the side of overkill here just means that we stall a little longer than may be strictly required, but we only expect to hit this path in extreme corner cases where returning an erroneous error is worse than the delay. v2: Logical inversion when swapping over branches. Fixes: 80b204bc ("drm/i915: Enable multiple timelines") Signed-off-by:
-
Ville Syrjälä authored
Add the minimal amount of PSR tracking into the crtc state. This allows precomputing the possibility of using PSR correctly, and it means we can safely call the psr enable/disable functions for any DP endcoder. As a nice bonus we get rid of some more crtc->config usage, which we want to kill off eventually. v2: Fix 'goto unlock' fail in intel_psr_enable() (Jani) Check intel_dp_is_edp() in is_edp_psr() (Jani) Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: -
Jani Nikula authored
Signed-off-by: -
Joonas Lahtinen authored
Remove dead code around has_aliasing_ppgtt condition. Suggested-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Chris Wilson authored
Purely to silence lockdep, as we know that no bo can exist at this time and so the inversion is impossible. Nevertheless, lockdep currently warns on unload: [ 137.522565] WARNING: possible circular locking dependency detected [ 137.522568] 4.14.0-rc4-CI-CI_DRM_3209+ #1 Tainted: G U [ 137.522570] ------------------------------------------------------ [ 137.522572] drv_module_relo/1532 is trying to acquire lock: [ 137.522574] ("i915-userptr-acquire"){+.+.}, at: [<ffffffff8109a831>] flush_workqueue+0x91/0x540 [ 137.522581] but task is already holding lock: [ 137.522583] (&dev->struct_mutex){+.+.}, at: [<ffffffffa014fb3f>] i915_gem_fini+0x3f/0xc0 [i915] [ 137.522605] which lock already depends on the new lock. [ 137.522608] the existing dependency chain (in reverse order) is: [ 137.522611] -> #3 (&dev->struct_mutex){+.+.}: [ 137.522615] __lock_acquire+0x1420/0x15e0 [ 137.522618] lock_acquire+0xb0/0x200 [ 137.522621] __mutex_lock+0x86/0x9b0 [ 137.522623] mutex_lock_interruptible_nested+0x1b/0x20 [ 137.522640] i915_mutex_lock_interruptible+0x51/0x130 [i915] [ 137.522657] i915_gem_fault+0x20b/0x720 [i915] [ 137.522660] __do_fault+0x1e/0x80 [ 137.522662] __handle_mm_fault+0xa08/0xed0 [ 137.522664] handle_mm_fault+0x156/0x300 [ 137.522666] __do_page_fault+0x2c5/0x570 [ 137.522668] do_page_fault+0x28/0x250 [ 137.522671] page_fault+0x22/0x30 [ 137.522672] -> #2 (&mm->mmap_sem){++++}: [ 137.522677] __lock_acquire+0x1420/0x15e0 [ 137.522679] lock_acquire+0xb0/0x200 [ 137.522682] down_read+0x3e/0x70 [ 137.522699] __i915_gem_userptr_get_pages_worker+0x141/0x240 [i915] [ 137.522701] process_one_work+0x233/0x660 [ 137.522704] worker_thread+0x4e/0x3b0 [ 137.522706] kthread+0x152/0x190 [ 137.522708] ret_from_fork+0x27/0x40 [ 137.522710] -> #1 ((&work->work)){+.+.}: [ 137.522714] __lock_acquire+0x1420/0x15e0 [ 137.522717] lock_acquire+0xb0/0x200 [ 137.522719] process_one_work+0x206/0x660 [ 137.522721] worker_thread+0x4e/0x3b0 [ 137.522723] kthread+0x152/0x190 [ 137.522725] ret_from_fork+0x27/0x40 [ 137.522727] -> #0 ("i915-userptr-acquire"){+.+.}: [ 137.522731] check_prev_add+0x430/0x840 [ 137.522733] __lock_acquire+0x1420/0x15e0 [ 137.522735] lock_acquire+0xb0/0x200 [ 137.522738] flush_workqueue+0xb4/0x540 [ 137.522740] drain_workqueue+0xd4/0x1b0 [ 137.522742] destroy_workqueue+0x1c/0x200 [ 137.522758] i915_gem_cleanup_userptr+0x15/0x20 [i915] [ 137.522770] i915_gem_fini+0x5f/0xc0 [i915] [ 137.522782] i915_driver_unload+0x122/0x180 [i915] [ 137.522794] i915_pci_remove+0x19/0x30 [i915] [ 137.522797] pci_device_remove+0x39/0xb0 [ 137.522800] device_release_driver_internal+0x15d/0x220 [ 137.522803] driver_detach+0x40/0x80 [ 137.522805] bus_remove_driver+0x58/0xd0 [ 137.522807] driver_unregister+0x2c/0x40 [ 137.522809] pci_unregister_driver+0x36/0xb0 [ 137.522828] i915_exit+0x1a/0x8b [i915] [ 137.522831] SyS_delete_module+0x18c/0x1e0 [ 137.522834] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 137.522835] other info that might help us debug this: [ 137.522838] Chain exists of: "i915-userptr-acquire" --> &mm->mmap_sem --> &dev->struct_mutex [ 137.522844] Possible unsafe locking scenario: [ 137.522846] CPU0 CPU1 [ 137.522848] ---- ---- [ 137.522850] lock(&dev->struct_mutex); [ 137.522852] lock(&mm->mmap_sem); [ 137.522854] lock(&dev->struct_mutex); [ 137.522857] lock("i915-userptr-acquire"); [ 137.522859] *** DEADLOCK *** [ 137.522862] 3 locks held by drv_module_relo/1532: [ 137.522864] #0: (&dev->mutex){....}, at: [<ffffffff8161d47b>] device_release_driver_internal+0x2b/0x220 [ 137.522869] #1: (&dev->mutex){....}, at: [<ffffffff8161d489>] device_release_driver_internal+0x39/0x220 [ 137.522873] #2: (&dev->struct_mutex){+.+.}, at: [<ffffffffa014fb3f>] i915_gem_fini+0x3f/0xc0 [i915] [ 137.522888] stack backtrace: [ 137.522891] CPU: 0 PID: 1532 Comm: drv_module_relo Tainted: G U 4.14.0-rc4-CI-CI_DRM_3209+ #1 [ 137.522894] Hardware name: /NUC7i5BNB, BIOS BNKBL357.86A.0048.2017.0704.1415 07/04/2017 [ 137.522897] Call Trace: [ 137.522900] dump_stack+0x68/0x9f [ 137.522902] print_circular_bug+0x235/0x3c0 [ 137.522905] ? lockdep_init_map_crosslock+0x20/0x20 [ 137.522908] check_prev_add+0x430/0x840 [ 137.522919] ? i915_gem_fini+0x5f/0xc0 [i915] [ 137.522922] ? __kernel_text_address+0x12/0x40 [ 137.522925] ? __save_stack_trace+0x66/0xd0 [ 137.522928] __lock_acquire+0x1420/0x15e0 [ 137.522930] ? __lock_acquire+0x1420/0x15e0 [ 137.522933] ? lockdep_init_map_crosslock+0x20/0x20 [ 137.522936] ? __this_cpu_preempt_check+0x13/0x20 [ 137.522938] lock_acquire+0xb0/0x200 [ 137.522940] ? flush_workqueue+0x91/0x540 [ 137.522943] flush_workqueue+0xb4/0x540 [ 137.522945] ? flush_workqueue+0x91/0x540 [ 137.522948] ? __mutex_unlock_slowpath+0x43/0x2c0 [ 137.522951] ? trace_hardirqs_on_caller+0xe3/0x1b0 [ 137.522954] drain_workqueue+0xd4/0x1b0 [ 137.522956] ? drain_workqueue+0xd4/0x1b0 [ 137.522958] destroy_workqueue+0x1c/0x200 [ 137.522975] i915_gem_cleanup_userptr+0x15/0x20 [i915] [ 137.522987] i915_gem_fini+0x5f/0xc0 [i915] [ 137.523000] i915_driver_unload+0x122/0x180 [i915] [ 137.523015] i915_pci_remove+0x19/0x30 [i915] [ 137.523018] pci_device_remove+0x39/0xb0 [ 137.523021] device_release_driver_internal+0x15d/0x220 [ 137.523023] driver_detach+0x40/0x80 [ 137.523026] bus_remove_driver+0x58/0xd0 [ 137.523028] driver_unregister+0x2c/0x40 [ 137.523030] pci_unregister_driver+0x36/0xb0 [ 137.523049] i915_exit+0x1a/0x8b [i915] [ 137.523052] SyS_delete_module+0x18c/0x1e0 [ 137.523055] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 137.523057] RIP: 0033:0x7f7bd0609287 [ 137.523059] RSP: 002b:00007ffef694bc18 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 [ 137.523062] RAX: ffffffffffffffda RBX: ffffffff81493f33 RCX: 00007f7bd0609287 [ 137.523065] RDX: 0000000000000001 RSI: 0000000000000800 RDI: 0000564f999f9fc8 [ 137.523067] RBP: ffffc90005c4ff88 R08: 0000000000000000 R09: 0000000000000080 [ 137.523069] R10: 00007f7bd20ef8c0 R11: 0000000000000246 R12: 0000000000000000 [ 137.523072] R13: 00007ffef694be00 R14: 0000000000000000 R15: 0000000000000000 [ 137.523075] ? __this_cpu_preempt_check+0x13/0x20 Signed-off-by:
-
