Skip to content

L
linux
Switch branch/tag
  1. 10 Jul, 2019 13 commits
  3. 03 Jul, 2019 27 commits
    • Greg Kroah-Hartman's avatar
      Linux 5.1.16 · 8584aaf1
      Greg Kroah-Hartman authored
      8584aaf1
    • Jean-Philippe Brucker's avatar
      arm64: insn: Fix ldadd instruction encoding · 25998210
      Jean-Philippe Brucker authored 
      commit c5e2edeb upstream.

GCC 8.1.0 reports that the ldadd instruction encoding, recently added to
insn.c, doesn't match the mask and couldn't possibly be identified:

 linux/arch/arm64/include/asm/insn.h: In function 'aarch64_insn_is_ldadd':
 linux/arch/arm64/include/asm/insn.h:280:257: warning: bitwise comparison always evaluates to false [-Wtautological-compare]

Bits [31:30] normally encode the size of the instruction (1 to 8 bytes)
and the current instruction value only encodes the 4- and 8-byte
variants. At the moment only the BPF JIT needs this instruction, and
doesn't require the 1- and 2-byte variants, but to be consistent with
our other ldr and str instruction encodings, clear the size field in the
insn value.

Fixes: 34b8ab09 ("bpf, arm64: use more scalable stadd over ldxr / stxr loop in xadd")
Acked-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Reported-by: default avatarKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: default avatarYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: default avatarJean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: default avatarWill Deacon <will.deacon@arm.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      25998210
    • Xin Long's avatar
      tipc: pass tunnel dev as NULL to udp_tunnel(6)_xmit_skb · cf9513b4
      Xin Long authored 
      commit c3bcde02 upstream.

udp_tunnel(6)_xmit_skb() called by tipc_udp_xmit() expects a tunnel device
to count packets on dev->tstats, a perpcu variable. However, TIPC is using
udp tunnel with no tunnel device, and pass the lower dev, like veth device
that only initializes dev->lstats(a perpcu variable) when creating it.

Later iptunnel_xmit_stats() called by ip(6)tunnel_xmit() thinks the dev as
a tunnel device, and uses dev->tstats instead of dev->lstats. tstats' each
pointer points to a bigger struct than lstats, so when tstats->tx_bytes is
increased, other percpu variable's members could be overwritten.

syzbot has reported quite a few crashes due to fib_nh_common percpu member
'nhc_pcpu_rth_output' overwritten, call traces are like:

  BUG: KASAN: slab-out-of-bounds in rt_cache_valid+0x158/0x190
  net/ipv4/route.c:1556
    rt_cache_valid+0x158/0x190 net/ipv4/route.c:1556
    __mkroute_output net/ipv4/route.c:2332 [inline]
    ip_route_output_key_hash_rcu+0x819/0x2d50 net/ipv4/route.c:2564
    ip_route_output_key_hash+0x1ef/0x360 net/ipv4/route.c:2393
    __ip_route_output_key include/net/route.h:125 [inline]
    ip_route_output_flow+0x28/0xc0 net/ipv4/route.c:2651
    ip_route_output_key include/net/route.h:135 [inline]
  ...

or:

  kasan: GPF could be caused by NULL-ptr deref or user memory access
  RIP: 0010:dst_dev_put+0x24/0x290 net/core/dst.c:168
    <IRQ>
    rt_fibinfo_free_cpus net/ipv4/fib_semantics.c:200 [inline]
    free_fib_info_rcu+0x2e1/0x490 net/ipv4/fib_semantics.c:217
    __rcu_reclaim kernel/rcu/rcu.h:240 [inline]
    rcu_do_batch kernel/rcu/tree.c:2437 [inline]
    invoke_rcu_callbacks kernel/rcu/tree.c:2716 [inline]
    rcu_process_callbacks+0x100a/0x1ac0 kernel/rcu/tree.c:2697
  ...

The issue exists since tunnel stats update is moved to iptunnel_xmit by
Commit 039f5062 ("ip_tunnel: Move stats update to iptunnel_xmit()"),
and here to fix it by passing a NULL tunnel dev to udp_tunnel(6)_xmit_skb
so that the packets counting won't happen on dev->tstats.

Reported-by: syzbot+9d4c12bfd45a58738d0a@syzkaller.appspotmail.com
Reported-by: syzbot+a9e23ea2aa21044c2798@syzkaller.appspotmail.com
Reported-by: syzbot+c4c4b2bb358bb936ad7e@syzkaller.appspotmail.com
Reported-by: syzbot+0290d2290a607e035ba1@syzkaller.appspotmail.com
Reported-by: syzbot+a43d8d4e7e8a7a9e149e@syzkaller.appspotmail.com
Reported-by: syzbot+a47c5f4c6c00fc1ed16e@syzkaller.appspotmail.com
Fixes: 039f5062 ("ip_tunnel: Move stats update to iptunnel_xmit()")
Signed-off-by: default avatarXin Long <lucien.xin@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      cf9513b4
    • Amir Goldstein's avatar
      fanotify: update connector fsid cache on add mark · b74063b5
      Amir Goldstein authored 
      commit c285a2f0 upstream.

When implementing connector fsid cache, we only initialized the cache
when the first mark added to object was added by FAN_REPORT_FID group.
We forgot to update conn->fsid when the second mark is added by
FAN_REPORT_FID group to an already attached connector without fsid
cache.

Reported-and-tested-by: syzbot+c277e8e2f46414645508@syzkaller.appspotmail.com
Fixes: 77115225 ("fanotify: cache fsid in fsnotify_mark_connector")
Signed-off-by: default avatarAmir Goldstein <amir73il@gmail.com>
Signed-off-by: default avatarJan Kara <jack@suse.cz>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b74063b5
    • Jason Gunthorpe's avatar
      RDMA: Directly cast the sockaddr union to sockaddr · 993a0821
      Jason Gunthorpe authored 
      commit 641114d2 upstream.

gcc 9 now does allocation size tracking and thinks that passing the member
of a union and then accessing beyond that member's bounds is an overflow.

Instead of using the union member, use the entire union with a cast to
get to the sockaddr. gcc will now know that the memory extends the full
size of the union.
Signed-off-by: default avatarJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      993a0821
    • Will Deacon's avatar
      futex: Update comments and docs about return values of arch futex code · 41dd902f
      Will Deacon authored 
      commit 42750351 upstream.

The architecture implementations of 'arch_futex_atomic_op_inuser()' and
'futex_atomic_cmpxchg_inatomic()' are permitted to return only -EFAULT,
-EAGAIN or -ENOSYS in the case of failure.

Update the comments in the asm-generic/ implementation and also a stray
reference in the robust futex documentation.
Signed-off-by: default avatarWill Deacon <will.deacon@arm.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      41dd902f
    • Daniel Borkmann's avatar
      bpf, arm64: use more scalable stadd over ldxr / stxr loop in xadd · 272ca391
      Daniel Borkmann authored 
      commit 34b8ab09 upstream.

Since ARMv8.1 supplement introduced LSE atomic instructions back in 2016,
lets add support for STADD and use that in favor of LDXR / STXR loop for
the XADD mapping if available. STADD is encoded as an alias for LDADD with
XZR as the destination register, therefore add LDADD to the instruction
encoder along with STADD as special case and use it in the JIT for CPUs
that advertise LSE atomics in CPUID register. If immediate offset in the
BPF XADD insn is 0, then use dst register directly instead of temporary
one.
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Acked-by: default avatarJean-Philippe Brucker <jean-philippe.brucker@arm.com>
Acked-by: default avatarWill Deacon <will.deacon@arm.com>
Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      272ca391
    • Will Deacon's avatar
      arm64: futex: Avoid copying out uninitialised stack in failed cmpxchg() · fac9c643
      Will Deacon authored 
      commit 8e4e0ac0 upstream.

Returning an error code from futex_atomic_cmpxchg_inatomic() indicates
that the caller should not make any use of *uval, and should instead act
upon on the value of the error code. Although this is implemented
correctly in our futex code, we needlessly copy uninitialised stack to
*uval in the error case, which can easily be avoided.
Signed-off-by: default avatarWill Deacon <will.deacon@arm.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      fac9c643
    • Martin KaFai Lau's avatar
      bpf: udp: ipv6: Avoid running reuseport's bpf_prog from __udp6_lib_err · bb3fb093
      Martin KaFai Lau authored 
      commit 4ac30c4b upstream.

__udp6_lib_err() may be called when handling icmpv6 message. For example,
the icmpv6 toobig(type=2).  __udp6_lib_lookup() is then called
which may call reuseport_select_sock().  reuseport_select_sock() will
call into a bpf_prog (if there is one).

reuseport_select_sock() is expecting the skb->data pointing to the
transport header (udphdr in this case).  For example, run_bpf_filter()
is pulling the transport header.

However, in the __udp6_lib_err() path, the skb->data is pointing to the
ipv6hdr instead of the udphdr.

One option is to pull and push the ipv6hdr in __udp6_lib_err().
Instead of doing this, this patch follows how the original
commit 538950a1 ("soreuseport: setsockopt SO_ATTACH_REUSEPORT_[CE]BPF")
was done in IPv4, which has passed a NULL skb pointer to
reuseport_select_sock().

Fixes: 538950a1 ("soreuseport: setsockopt SO_ATTACH_REUSEPORT_[CE]BPF")
Cc: Craig Gallek <kraig@google.com>
Signed-off-by: default avatarMartin KaFai Lau <kafai@fb.com>
Acked-by: default avatarSong Liu <songliubraving@fb.com>
Acked-by: default avatarCraig Gallek <kraig@google.com>
Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      bb3fb093
    • Martin KaFai Lau's avatar
      bpf: udp: Avoid calling reuseport's bpf_prog from udp_gro · da6dab63
      Martin KaFai Lau authored 
      commit 257a525f upstream.

When the commit a6024562 ("udp: Add GRO functions to UDP socket")
added udp[46]_lib_lookup_skb to the udp_gro code path, it broke
the reuseport_select_sock() assumption that skb->data is pointing
to the transport header.

This patch follows an earlier __udp6_lib_err() fix by
passing a NULL skb to avoid calling the reuseport's bpf_prog.

Fixes: a6024562 ("udp: Add GRO functions to UDP socket")
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: default avatarMartin KaFai Lau <kafai@fb.com>
Acked-by: default avatarSong Liu <songliubraving@fb.com>
Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      da6dab63
    • Daniel Borkmann's avatar
      bpf: fix unconnected udp hooks · 591c18e3
      Daniel Borkmann authored 
      commit 983695fa upstream.

Intention of cgroup bind/connect/sendmsg BPF hooks is to act transparently
to applications as also stated in original motivation in 7828f20e ("Merge
branch 'bpf-cgroup-bind-connect'"). When recently integrating the latter
two hooks into Cilium to enable host based load-balancing with Kubernetes,
I ran into the issue that pods couldn't start up as DNS got broken. Kubernetes
typically sets up DNS as a service and is thus subject to load-balancing.

Upon further debugging, it turns out that the cgroupv2 sendmsg BPF hooks API
is currently insufficient and thus not usable as-is for standard applications
shipped with most distros. To break down the issue we ran into with a simple
example:

  # cat /etc/resolv.conf
  nameserver 147.75.207.207
  nameserver 147.75.207.208

For the purpose of a simple test, we set up above IPs as service IPs and
transparently redirect traffic to a different DNS backend server for that
node:

  # cilium service list
  ID   Frontend            Backend
  1    147.75.207.207:53   1 => 8.8.8.8:53
  2    147.75.207.208:53   1 => 8.8.8.8:53

The attached BPF program is basically selecting one of the backends if the
service IP/port matches on the cgroup hook. DNS breaks here, because the
hooks are not transparent enough to applications which have built-in msg_name
address checks:

  # nslookup 1.1.1.1
  ;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.207#53
  ;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.208#53
  ;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.207#53
  [...]
  ;; connection timed out; no servers could be reached

  # dig 1.1.1.1
  ;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.207#53
  ;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.208#53
  ;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.207#53
  [...]

  ; <<>> DiG 9.11.3-1ubuntu1.7-Ubuntu <<>> 1.1.1.1
  ;; global options: +cmd
  ;; connection timed out; no servers could be reached

For comparison, if none of the service IPs is used, and we tell nslookup
to use 8.8.8.8 directly it works just fine, of course:

  # nslookup 1.1.1.1 8.8.8.8
  1.1.1.1.in-addr.arpa	name = one.one.one.one.

In order to fix this and thus act more transparent to the application,
this needs reverse translation on recvmsg() side. A minimal fix for this
API is to add similar recvmsg() hooks behind the BPF cgroups static key
such that the program can track state and replace the current sockaddr_in{,6}
with the original service IP. From BPF side, this basically tracks the
service tuple plus socket cookie in an LRU map where the reverse NAT can
then be retrieved via map value as one example. Side-note: the BPF cgroups
static key should be converted to a per-hook static key in future.

Same example after this fix:

  # cilium service list
  ID   Frontend            Backend
  1    147.75.207.207:53   1 => 8.8.8.8:53
  2    147.75.207.208:53   1 => 8.8.8.8:53

Lookups work fine now:

  # nslookup 1.1.1.1
  1.1.1.1.in-addr.arpa    name = one.one.one.one.

  Authoritative answers can be found from:

  # dig 1.1.1.1

  ; <<>> DiG 9.11.3-1ubuntu1.7-Ubuntu <<>> 1.1.1.1
  ;; global options: +cmd
  ;; Got answer:
  ;; ->>HEADER<<- opcode: QUERY, status: NXDOMAIN, id: 51550
  ;; flags: qr rd ra ad; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 1

  ;; OPT PSEUDOSECTION:
  ; EDNS: version: 0, flags:; udp: 512
  ;; QUESTION SECTION:
  ;1.1.1.1.                       IN      A

  ;; AUTHORITY SECTION:
  .                       23426   IN      SOA     a.root-servers.net. nstld.verisign-grs.com. 2019052001 1800 900 604800 86400

  ;; Query time: 17 msec
  ;; SERVER: 147.75.207.207#53(147.75.207.207)
  ;; WHEN: Tue May 21 12:59:38 UTC 2019
  ;; MSG SIZE  rcvd: 111

And from an actual packet level it shows that we're using the back end
server when talking via 147.75.207.20{7,8} front end:

  # tcpdump -i any udp
  [...]
  12:59:52.698732 IP foo.42011 > google-public-dns-a.google.com.domain: 18803+ PTR? 1.1.1.1.in-addr.arpa. (38)
  12:59:52.698735 IP foo.42011 > google-public-dns-a.google.com.domain: 18803+ PTR? 1.1.1.1.in-addr.arpa. (38)
  12:59:52.701208 IP google-public-dns-a.google.com.domain > foo.42011: 18803 1/0/0 PTR one.one.one.one. (67)
  12:59:52.701208 IP google-public-dns-a.google.com.domain > foo.42011: 18803 1/0/0 PTR one.one.one.one. (67)
  [...]

In order to be flexible and to have same semantics as in sendmsg BPF
programs, we only allow return codes in [1,1] range. In the sendmsg case
the program is called if msg->msg_name is present which can be the case
in both, connected and unconnected UDP.

The former only relies on the sockaddr_in{,6} passed via connect(2) if
passed msg->msg_name was NULL. Therefore, on recvmsg side, we act in similar
way to call into the BPF program whenever a non-NULL msg->msg_name was
passed independent of sk->sk_state being TCP_ESTABLISHED or not. Note
that for TCP case, the msg->msg_name is ignored in the regular recvmsg
path and therefore not relevant.

For the case of ip{,v6}_recv_error() paths, picked up via MSG_ERRQUEUE,
the hook is not called. This is intentional as it aligns with the same
semantics as in case of TCP cgroup BPF hooks right now. This might be
better addressed in future through a different bpf_attach_type such
that this case can be distinguished from the regular recvmsg paths,
for example.

Fixes: 1cedee13 ("bpf: Hooks for sys_sendmsg")
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Acked-by: default avatarAndrey Ignatov <rdna@fb.com>
Acked-by: default avatarMartin KaFai Lau <kafai@fb.com>
Acked-by: default avatarMartynas Pumputis <m@lambda.lt>
Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      591c18e3
    • Matt Mullins's avatar
      bpf: fix nested bpf tracepoints with per-cpu data · 2a9fedc1
      Matt Mullins authored 
      commit 9594dc3c upstream.

BPF_PROG_TYPE_RAW_TRACEPOINTs can be executed nested on the same CPU, as
they do not increment bpf_prog_active while executing.

This enables three levels of nesting, to support
  - a kprobe or raw tp or perf event,
  - another one of the above that irq context happens to call, and
  - another one in nmi context
(at most one of which may be a kprobe or perf event).

Fixes: 20b9d7ac ("bpf: avoid excessive stack usage for perf_sample_data")
Signed-off-by: default avatarMatt Mullins <mmullins@fb.com>
Acked-by: default avatarAndrii Nakryiko <andriin@fb.com>
Acked-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      2a9fedc1
    • Jonathan Lemon's avatar
      bpf: lpm_trie: check left child of last leftmost node for NULL · 7cec8976
      Jonathan Lemon authored 
      commit da2577fd upstream.

If the leftmost parent node of the tree has does not have a child
on the left side, then trie_get_next_key (and bpftool map dump) will
not look at the child on the right.  This leads to the traversal
missing elements.

Lookup is not affected.

Update selftest to handle this case.

Reproducer:

 bpftool map create /sys/fs/bpf/lpm type lpm_trie key 6 \
     value 1 entries 256 name test_lpm flags 1
 bpftool map update pinned /sys/fs/bpf/lpm key  8 0 0 0  0   0 value 1
 bpftool map update pinned /sys/fs/bpf/lpm key 16 0 0 0  0 128 value 2
 bpftool map dump   pinned /sys/fs/bpf/lpm

Returns only 1 element. (2 expected)

Fixes: b471f2f1 ("bpf: implement MAP_GET_NEXT_KEY command for LPM_TRIE")
Signed-off-by: default avatarJonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: default avatarMartin KaFai Lau <kafai@fb.com>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      7cec8976
    • Martynas Pumputis's avatar
      bpf: simplify definition of BPF_FIB_LOOKUP related flags · 7108c835
      Martynas Pumputis authored 
      commit b1d6c15b upstream.

Previously, the BPF_FIB_LOOKUP_{DIRECT,OUTPUT} flags in the BPF UAPI
were defined with the help of BIT macro. This had the following issues:

- In order to use any of the flags, a user was required to depend
  on <linux/bits.h>.
- No other flag in bpf.h uses the macro, so it seems that an unwritten
  convention is to use (1 << (nr)) to define BPF-related flags.

Fixes: 87f5fc7e ("bpf: Provide helper to do forwarding lookups in kernel FIB table")
Signed-off-by: default avatarMartynas Pumputis <m@lambda.lt>
Acked-by: default avatarAndrii Nakryiko <andriin@fb.com>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      7108c835
    • Dmitry Bogdanov's avatar
      net: aquantia: fix vlans not working over bridged network · 03c3e507
      Dmitry Bogdanov authored 
      [ Upstream commit 48dd73d0 ]

In configuration of vlan over bridge over aquantia device
it was found that vlan tagged traffic is dropped on chip.

The reason is that bridge device enables promisc mode,
but in atlantic chip vlan filters will still apply.
So we have to corellate promisc settings with vlan configuration.

The solution is to track in a separate state variable the
need of vlan forced promisc. And also consider generic
promisc configuration when doing vlan filter config.

Fixes: 7975d2af ("net: aquantia: add support of rx-vlan-filter offload")
Signed-off-by: default avatarDmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: default avatarIgor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      03c3e507
    • Fei Li's avatar
      tun: wake up waitqueues after IFF_UP is set · 9590d1d1
      Fei Li authored 
      [ Upstream commit 72b319dc ]

Currently after setting tap0 link up, the tun code wakes tx/rx waited
queues up in tun_net_open() when .ndo_open() is called, however the
IFF_UP flag has not been set yet. If there's already a wait queue, it
would fail to transmit when checking the IFF_UP flag in tun_sendmsg().
Then the saving vhost_poll_start() will add the wq into wqh until it
is waken up again. Although this works when IFF_UP flag has been set
when tun_chr_poll detects; this is not true if IFF_UP flag has not
been set at that time. Sadly the latter case is a fatal error, as
the wq will never be waken up in future unless later manually
setting link up on purpose.

Fix this by moving the wakeup process into the NETDEV_UP event
notifying process, this makes sure IFF_UP has been set before all
waited queues been waken up.
Signed-off-by: default avatarFei Li <lifei.shirley@bytedance.com>
Acked-by: default avatarJason Wang <jasowang@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      9590d1d1
    • Xin Long's avatar
      tipc: check msg->req data len in tipc_nl_compat_bearer_disable · a54c0c1d
      Xin Long authored 
      [ Upstream commit 4f07b80c ]

This patch is to fix an uninit-value issue, reported by syzbot:

  BUG: KMSAN: uninit-value in memchr+0xce/0x110 lib/string.c:981
  Call Trace:
    __dump_stack lib/dump_stack.c:77 [inline]
    dump_stack+0x191/0x1f0 lib/dump_stack.c:113
    kmsan_report+0x130/0x2a0 mm/kmsan/kmsan.c:622
    __msan_warning+0x75/0xe0 mm/kmsan/kmsan_instr.c:310
    memchr+0xce/0x110 lib/string.c:981
    string_is_valid net/tipc/netlink_compat.c:176 [inline]
    tipc_nl_compat_bearer_disable+0x2a1/0x480 net/tipc/netlink_compat.c:449
    __tipc_nl_compat_doit net/tipc/netlink_compat.c:327 [inline]
    tipc_nl_compat_doit+0x3ac/0xb00 net/tipc/netlink_compat.c:360
    tipc_nl_compat_handle net/tipc/netlink_compat.c:1178 [inline]
    tipc_nl_compat_recv+0x1b1b/0x27b0 net/tipc/netlink_compat.c:1281

TLV_GET_DATA_LEN() may return a negtive int value, which will be
used as size_t (becoming a big unsigned long) passed into memchr,
cause this issue.

Similar to what it does in tipc_nl_compat_bearer_enable(), this
fix is to return -EINVAL when TLV_GET_DATA_LEN() is negtive in
tipc_nl_compat_bearer_disable(), as well as in
tipc_nl_compat_link_stat_dump() and tipc_nl_compat_link_reset_stats().

v1->v2:
  - add the missing Fixes tags per Eric's request.

Fixes: 0762216c ("tipc: fix uninit-value in tipc_nl_compat_bearer_enable")
Fixes: 8b66fee7 ("tipc: fix uninit-value in tipc_nl_compat_link_reset_stats")
Reported-by: syzbot+30eaa8bf392f7fafffaf@syzkaller.appspotmail.com
Signed-off-by: default avatarXin Long <lucien.xin@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      a54c0c1d
    • Xin Long's avatar
      tipc: change to use register_pernet_device · ec7fafa6
      Xin Long authored 
      [ Upstream commit c492d4c7 ]

This patch is to fix a dst defcnt leak, which can be reproduced by doing:

  # ip net a c; ip net a s; modprobe tipc
  # ip net e s ip l a n eth1 type veth peer n eth1 netns c
  # ip net e c ip l s lo up; ip net e c ip l s eth1 up
  # ip net e s ip l s lo up; ip net e s ip l s eth1 up
  # ip net e c ip a a 1.1.1.2/8 dev eth1
  # ip net e s ip a a 1.1.1.1/8 dev eth1
  # ip net e c tipc b e m udp n u1 localip 1.1.1.2
  # ip net e s tipc b e m udp n u1 localip 1.1.1.1
  # ip net d c; ip net d s; rmmod tipc

and it will get stuck and keep logging the error:

  unregister_netdevice: waiting for lo to become free. Usage count = 1

The cause is that a dst is held by the udp sock's sk_rx_dst set on udp rx
path with udp_early_demux == 1, and this dst (eventually holding lo dev)
can't be released as bearer's removal in tipc pernet .exit happens after
lo dev's removal, default_device pernet .exit.

 "There are two distinct types of pernet_operations recognized: subsys and
  device.  At creation all subsys init functions are called before device
  init functions, and at destruction all device exit functions are called
  before subsys exit function."

So by calling register_pernet_device instead to register tipc_net_ops, the
pernet .exit() will be invoked earlier than loopback dev's removal when a
netns is being destroyed, as fou/gue does.

Note that vxlan and geneve udp tunnels don't have this issue, as the udp
sock is released in their device ndo_stop().

This fix is also necessary for tipc dst_cache, which will hold dsts on tx
path and I will introduce in my next patch.
Reported-by: default avatarLi Shuang <shuali@redhat.com>
Signed-off-by: default avatarXin Long <lucien.xin@gmail.com>
Acked-by: default avatarJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      ec7fafa6
    • YueHaibing's avatar
      team: Always enable vlan tx offload · a061216a
      YueHaibing authored 
      [ Upstream commit ee429742 ]

We should rather have vlan_tci filled all the way down
to the transmitting netdevice and let it do the hw/sw
vlan implementation.
Suggested-by: default avatarJiri Pirko <jiri@resnulli.us>
Signed-off-by: default avatarYueHaibing <yuehaibing@huawei.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      a061216a
    • Xin Long's avatar
      sctp: change to hold sk after auth shkey is created successfully · 6c616a13
      Xin Long authored 
      [ Upstream commit 25bff6d5 ]

Now in sctp_endpoint_init(), it holds the sk then creates auth
shkey. But when the creation fails, it doesn't release the sk,
which causes a sk defcnf leak,

Here to fix it by only holding the sk when auth shkey is created
successfully.

Fixes: a29a5bd4 ("[SCTP]: Implement SCTP-AUTH initializations.")
Reported-by: syzbot+afabda3890cc2f765041@syzkaller.appspotmail.com
Reported-by: syzbot+276ca1c77a19977c0130@syzkaller.appspotmail.com
Signed-off-by: default avatarXin Long <lucien.xin@gmail.com>
Acked-by: default avatarNeil Horman <nhorman@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      6c616a13
    • Dirk van der Merwe's avatar
      net/tls: fix page double free on TX cleanup · 0962d139
      Dirk van der Merwe authored 
      [ Upstream commit 9354544c ]

With commit 94850257 ("tls: Fix tls_device handling of partial records")
a new path was introduced to cleanup partial records during sk_proto_close.
This path does not handle the SW KTLS tx_list cleanup.

This is unnecessary though since the free_resources calls for both
SW and offload paths will cleanup a partial record.

The visible effect is the following warning, but this bug also causes
a page double free.

    WARNING: CPU: 7 PID: 4000 at net/core/stream.c:206 sk_stream_kill_queues+0x103/0x110
    RIP: 0010:sk_stream_kill_queues+0x103/0x110
    RSP: 0018:ffffb6df87e07bd0 EFLAGS: 00010206
    RAX: 0000000000000000 RBX: ffff8c21db4971c0 RCX: 0000000000000007
    RDX: ffffffffffffffa0 RSI: 000000000000001d RDI: ffff8c21db497270
    RBP: ffff8c21db497270 R08: ffff8c29f4748600 R09: 000000010020001a
    R10: ffffb6df87e07aa0 R11: ffffffff9a445600 R12: 0000000000000007
    R13: 0000000000000000 R14: ffff8c21f03f2900 R15: ffff8c21f03b8df0
    Call Trace:
     inet_csk_destroy_sock+0x55/0x100
     tcp_close+0x25d/0x400
     ? tcp_check_oom+0x120/0x120
     tls_sk_proto_close+0x127/0x1c0
     inet_release+0x3c/0x60
     __sock_release+0x3d/0xb0
     sock_close+0x11/0x20
     __fput+0xd8/0x210
     task_work_run+0x84/0xa0
     do_exit+0x2dc/0xb90
     ? release_sock+0x43/0x90
     do_group_exit+0x3a/0xa0
     get_signal+0x295/0x720
     do_signal+0x36/0x610
     ? SYSC_recvfrom+0x11d/0x130
     exit_to_usermode_loop+0x69/0xb0
     do_syscall_64+0x173/0x180
     entry_SYSCALL_64_after_hwframe+0x3d/0xa2
    RIP: 0033:0x7fe9b9abc10d
    RSP: 002b:00007fe9b19a1d48 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca
    RAX: fffffffffffffe00 RBX: 0000000000000006 RCX: 00007fe9b9abc10d
    RDX: 0000000000000002 RSI: 0000000000000080 RDI: 00007fe948003430
    RBP: 00007fe948003410 R08: 00007fe948003430 R09: 0000000000000000
    R10: 0000000000000000 R11: 0000000000000246 R12: 00005603739d9080
    R13: 00007fe9b9ab9f90 R14: 00007fe948003430 R15: 0000000000000000

Fixes: 94850257 ("tls: Fix tls_device handling of partial records")
Signed-off-by: default avatarDirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: default avatarJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      0962d139
    • Roland Hii's avatar
      net: stmmac: set IC bit when transmitting frames with HW timestamp · a6902fe4
      Roland Hii authored 
      [ Upstream commit d0bb82fd ]

When transmitting certain PTP frames, e.g. SYNC and DELAY_REQ, the
PTP daemon, e.g. ptp4l, is polling the driver for the frame transmit
hardware timestamp. The polling will most likely timeout if the tx
coalesce is enabled due to the Interrupt-on-Completion (IC) bit is
not set in tx descriptor for those frames.

This patch will ignore the tx coalesce parameter and set the IC bit
when transmitting PTP frames which need to report out the frame
transmit hardware timestamp to user space.

Fixes: f748be53 ("net: stmmac: Rework coalesce timer and fix multi-queue races")
Signed-off-by: default avatarRoland Hii <roland.king.guan.hii@intel.com>
Signed-off-by: default avatarOng Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: default avatarVoon Weifeng <weifeng.voon@intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      a6902fe4
    • Roland Hii's avatar
      net: stmmac: fixed new system time seconds value calculation · ac086d4c
      Roland Hii authored 
      [ Upstream commit a1e5388b ]

When ADDSUB bit is set, the system time seconds field is calculated as
the complement of the seconds part of the update value.

For example, if 3.000000001 seconds need to be subtracted from the
system time, this field is calculated as
2^32 - 3 = 4294967296 - 3 = 0x100000000 - 3 = 0xFFFFFFFD

Previously, the 0x100000000 is mistakenly written as 100000000.

This is further simplified from
  sec = (0x100000000ULL - sec);
to
  sec = -sec;

Fixes: ba1ffd74 ("stmmac: fix PTP support for GMAC4")
Signed-off-by: default avatarRoland Hii <roland.king.guan.hii@intel.com>
Signed-off-by: default avatarOng Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: default avatarVoon Weifeng <weifeng.voon@intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      ac086d4c
    • JingYi Hou's avatar
      net: remove duplicate fetch in sock_getsockopt · 505c9258
      JingYi Hou authored 
      [ Upstream commit d0bae4a0 ]

In sock_getsockopt(), 'optlen' is fetched the first time from userspace.
'len < 0' is then checked. Then in condition 'SO_MEMINFO', 'optlen' is
fetched the second time from userspace.

If change it between two fetches may cause security problems or unexpected
behaivor, and there is no reason to fetch it a second time.

To fix this, we need to remove the second fetch.
Signed-off-by: default avatarJingYi Hou <houjingyi647@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      505c9258
    • Eric Dumazet's avatar
      net/packet: fix memory leak in packet_set_ring() · 65b2a804
      Eric Dumazet authored 
      [ Upstream commit 55655e3d ]

syzbot found we can leak memory in packet_set_ring(), if user application
provides buggy parameters.

Fixes: 7f953ab2 ("af_packet: TX_RING support for TPACKET_V3")
Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
Cc: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Reported-by: default avatarsyzbot <syzkaller@googlegroups.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      65b2a804
    • Stephen Suryaputra's avatar
      ipv4: Use return value of inet_iif() for __raw_v4_lookup in the while loop · c79ab459
      Stephen Suryaputra authored 
      [ Upstream commit 38c73529 ]

In commit 19e4e768 ("ipv4: Fix raw socket lookup for local
traffic"), the dif argument to __raw_v4_lookup() is coming from the
returned value of inet_iif() but the change was done only for the first
lookup. Subsequent lookups in the while loop still use skb->dev->ifIndex.

Fixes: 19e4e768 ("ipv4: Fix raw socket lookup for local traffic")
Signed-off-by: default avatarStephen Suryaputra <ssuryaextr@gmail.com>
Reviewed-by: default avatarDavid Ahern <dsahern@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      c79ab459
    • YueHaibing's avatar
      bonding: Always enable vlan tx offload · bc4fdb7d
      YueHaibing authored 
      [ Upstream commit 30d8177e ]

We build vlan on top of bonding interface, which vlan offload
is off, bond mode is 802.3ad (LACP) and xmit_hash_policy is
BOND_XMIT_POLICY_ENCAP34.

Because vlan tx offload is off, vlan tci is cleared and skb push
the vlan header in validate_xmit_vlan() while sending from vlan
devices. Then in bond_xmit_hash, __skb_flow_dissect() fails to
get information from protocol headers encapsulated within vlan,
because 'nhoff' is points to IP header, so bond hashing is based
on layer 2 info, which fails to distribute packets across slaves.

This patch always enable bonding's vlan tx offload, pass the vlan
packets to the slave devices with vlan tci, let them to handle
vlan implementation.

Fixes: 278339a4 ("bonding: propogate vlan_features to bonding master")
Suggested-by: default avatarJiri Pirko <jiri@resnulli.us>
Signed-off-by: default avatarYueHaibing <yuehaibing@huawei.com>
Acked-by: default avatarJiri Pirko <jiri@mellanox.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      bc4fdb7d
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7