- 13 Nov, 2008 25 commits
-
-
Pavel Machek authored
This adds a driver to the accelerometer sensor found in several HP laptops (under the commercial names of "HP Mobile Data Protection System 3D" and "HP 3D driveguard"). It tries to have more or less the same interfaces as the hdaps and other accelerometer drivers: in sysfs and as a joystick. This driver was first written by Yan Burman. Eric Piel has updated it and slimed it up (including the removal of an interface to access to the free-fall feature of the sensor because it is not reliable enough for now). Pavel Machek removed few more features and switched locking from semaphore to mutex. Several people have contributed to the database of the axes. [eric.piel@tremplin-utc.net: LIS3LV02D: Conform to the new ACPI API] Signed-off-by:
Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by:
Yan Burman <burman.yan@gmail.com> Signed-off-by:
Pavel Machek <pavel@suse.cz> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
KAMEZAWA Hiroyuki authored
The start pfn calculation in page_cgroup's memory hotplug notifier chain is wrong. Tested-by:
Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by:
-
Theodore Tso authored
Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Cc: <linux-ext4@vger.kernel.org> Signed-off-by:
-
Jean-Christophe Lallemand authored
We're working with an AT91SAM9263 Rev B in our design and I experienced some inconsistency in spi-based touchscreen usage between our board and the Atmel evaluation kit we have that runs on a Rev A chip. The data was apparently delayed by 1 byte and got ridiculous data out of the touchscreen driver, very strange. As everything looked normal in the spi, touchscreen and dma logs, I contacted the Atmel support and they triggered me on a new HW bug that appeared in the Rev B SPI controller. The problem is that the SPI controller on the Rev B needs that the software reset is performed two times so that it's performed correctly. Applying the patch below solves the issue on my Rev B board. I've tested it as well on my Rev A evaluation kit and it has apparently no unwanted side effect, things continue to work as expected. Signed-off-by:
Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Darrick J. Wong authored
The adt7468 is a follow-on to the adt7463, so plumb in adt7468 support along the same code paths. Signed-off-by:
Darrick J. Wong <djwong@us.ibm.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Darrick J. Wong authored
Implement correct range checking for adt7470 to prevent userland from writing impossible values into the chip, and cap out-of-range values per standard hwmon conventions. Implement correct rounding of input values per standard hwmon conventions. Signed-off-by:
-
Darrick J. Wong authored
Implement correct range checking for adt7470 to prevent userland from writing impossible values into the chip, and cap out-of-range values per standard hwmon conventions. Implement correct rounding of input values per standard hwmon conventions. Signed-off-by:
-
Andrew Morton authored
We only need the cacheline padding on SMP kernels. Saves 6k: text data bss dec hex filename 5713 388 8840 14941 3a5d kernel/kprobes.o 5713 388 2632 8733 221d kernel/kprobes.o Acked-by:
Masami Hiramatsu <mhiramat@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by:
-
Marco Stornelli authored
xip documentation updated: - change "get_xip_page" to "get_xip_mem"; - explain changed function parameters Signed-off-by:
Marco Stornelli <marco.stornelli@gmail.com> Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: Carsten Otte <cotte@de.ibm.com> Signed-off-by:
-
Randy Dunlap authored
Add printk-formats.txt so that we don't have to keep fixing the same things over and over again. <wishful thinking> Signed-off-by:
-
Andrew Morton authored
It mistakenly assumes that a static local in an inlined function is a kernel-wide singleton. It also has no callers, so let's remove it. Cc: Dave Young <hidave.darkstar@gmail.com> Signed-off-by:
-
Eric W. Biederman authored
In the last refactoring of shrink_submounts a variable was not completely renamed. So finish the renaming of mnt to m now. Without this if you attempt to mount an nfs mount that has both automatic nfs sub mounts on it, and has normal mounts on it. The unmount will succeed when it should not. Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Al Viro <viro@ZenIV.linux.org.uk Signed-off-by:
-
KOSAKI Motohiro authored
lockdep warns about following message at boot time on one of my test machine. Then, schedule_on_each_cpu() sholdn't be called when the task have mmap_sem. Actually, lru_add_drain_all() exist to prevent the unevictalble pages stay on reclaimable lru list. but currenct unevictable code can rescue unevictable pages although it stay on reclaimable list. So removing is better. In addition, this patch add lru_add_drain_all() to sys_mlock() and sys_mlockall(). it isn't must. but it reduce the failure of moving to unevictable list. its failure can rescue in vmscan later. but reducing is better. Note, if above rescuing happend, the Mlocked and the Unevictable field mismatching happend in /proc/meminfo. but it doesn't cause any real trouble. ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.28-rc2-mm1 #2 ------------------------------------------------------- lvm/1103 is trying to acquire lock: (&cpu_hotplug.lock){--..}, at: [<c0130789>] get_online_cpus+0x29/0x50 but task is already holding lock: (&mm->mmap_sem){----}, at: [<c01878ae>] sys_mlockall+0x4e/0xb0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&mm->mmap_sem){----}: [<c0153da2>] check_noncircular+0x82/0x110 [<c0185e6a>] might_fault+0x4a/0xa0 [<c0156161>] validate_chain+0xb11/0x1070 [<c0185e6a>] might_fault+0x4a/0xa0 [<c0156923>] __lock_acquire+0x263/0xa10 [<c015714c>] lock_acquire+0x7c/0xb0 (*) grab mmap_sem [<c0185e6a>] might_fault+0x4a/0xa0 [<c0185e9b>] might_fault+0x7b/0xa0 [<c0185e6a>] might_fault+0x4a/0xa0 [<c0294dd0>] copy_to_user+0x30/0x60 [<c01ae3ec>] filldir+0x7c/0xd0 [<c01e3a6a>] sysfs_readdir+0x11a/0x1f0 (*) grab sysfs_mutex [<c01ae370>] filldir+0x0/0xd0 [<c01ae370>] filldir+0x0/0xd0 [<c01ae4c6>] vfs_readdir+0x86/0xa0 (*) grab i_mutex [<c01ae75b>] sys_getdents+0x6b/0xc0 [<c010355a>] syscall_call+0x7/0xb [<ffffffff>] 0xffffffff -> #2 (sysfs_mutex){--..}: [<c0153da2>] check_noncircular+0x82/0x110 [<c01e3d2c>] sysfs_addrm_start+0x2c/0xc0 [<c0156161>] validate_chain+0xb11/0x1070 [<c01e3d2c>] sysfs_addrm_start+0x2c/0xc0 [<c0156923>] __lock_acquire+0x263/0xa10 [<c015714c>] lock_acquire+0x7c/0xb0 (*) grab sysfs_mutex [<c01e3d2c>] sysfs_addrm_start+0x2c/0xc0 [<c04f8b55>] mutex_lock_nested+0xa5/0x2f0 [<c01e3d2c>] sysfs_addrm_start+0x2c/0xc0 [<c01e3d2c>] sysfs_addrm_start+0x2c/0xc0 [<c01e3d2c>] sysfs_addrm_start+0x2c/0xc0 [<c01e422f>] create_dir+0x3f/0x90 [<c01e42a9>] sysfs_create_dir+0x29/0x50 [<c04faaf5>] _spin_unlock+0x25/0x40 [<c028f21d>] kobject_add_internal+0xcd/0x1a0 [<c028f37a>] kobject_set_name_vargs+0x3a/0x50 [<c028f41d>] kobject_init_and_add+0x2d/0x40 [<c019d4d2>] sysfs_slab_add+0xd2/0x180 [<c019d580>] sysfs_add_func+0x0/0x70 [<c019d5dc>] sysfs_add_func+0x5c/0x70 (*) grab slub_lock [<c01400f2>] run_workqueue+0x172/0x200 [<c014008f>] run_workqueue+0x10f/0x200 [<c0140bd0>] worker_thread+0x0/0xf0 [<c0140c6c>] worker_thread+0x9c/0xf0 [<c0143c80>] autoremove_wake_function+0x0/0x50 [<c0140bd0>] worker_thread+0x0/0xf0 [<c0143972>] kthread+0x42/0x70 [<c0143930>] kthread+0x0/0x70 [<c01042db>] kernel_thread_helper+0x7/0x1c [<ffffffff>] 0xffffffff -> #1 (slub_lock){----}: [<c0153d2d>] check_noncircular+0xd/0x110 [<c04f650f>] slab_cpuup_callback+0x11f/0x1d0 [<c0156161>] validate_chain+0xb11/0x1070 [<c04f650f>] slab_cpuup_callback+0x11f/0x1d0 [<c015433d>] mark_lock+0x35d/0xd00 [<c0156923>] __lock_acquire+0x263/0xa10 [<c015714c>] lock_acquire+0x7c/0xb0 [<c04f650f>] slab_cpuup_callback+0x11f/0x1d0 [<c04f93a3>] down_read+0x43/0x80 [<c04f650f>] slab_cpuup_callback+0x11f/0x1d0 (*) grab slub_lock [<c04f650f>] slab_cpuup_callback+0x11f/0x1d0 [<c04fd9ac>] notifier_call_chain+0x3c/0x70 [<c04f5454>] _cpu_up+0x84/0x110 [<c04f552b>] cpu_up+0x4b/0x70 (*) grab cpu_hotplug.lock [<c06d1530>] kernel_init+0x0/0x170 [<c06d15e5>] kernel_init+0xb5/0x170 [<c06d1530>] kernel_init+0x0/0x170 [<c01042db>] kernel_thread_helper+0x7/0x1c [<ffffffff>] 0xffffffff -> #0 (&cpu_hotplug.lock){--..}: [<c0155bff>] validate_chain+0x5af/0x1070 [<c040f7e0>] dev_status+0x0/0x50 [<c0156923>] __lock_acquire+0x263/0xa10 [<c015714c>] lock_acquire+0x7c/0xb0 [<c0130789>] get_online_cpus+0x29/0x50 [<c04f8b55>] mutex_lock_nested+0xa5/0x2f0 [<c0130789>] get_online_cpus+0x29/0x50 [<c0130789>] get_online_cpus+0x29/0x50 [<c017bc30>] lru_add_drain_per_cpu+0x0/0x10 [<c0130789>] get_online_cpus+0x29/0x50 (*) grab cpu_hotplug.lock [<c0140cf2>] schedule_on_each_cpu+0x32/0xe0 [<c0187095>] __mlock_vma_pages_range+0x85/0x2c0 [<c0156945>] __lock_acquire+0x285/0xa10 [<c0188f09>] vma_merge+0xa9/0x1d0 [<c0187450>] mlock_fixup+0x180/0x200 [<c0187548>] do_mlockall+0x78/0x90 (*) grab mmap_sem [<c01878e1>] sys_mlockall+0x81/0xb0 [<c010355a>] syscall_call+0x7/0xb [<ffffffff>] 0xffffffff other info that might help us debug this: 1 lock held by lvm/1103: #0: (&mm->mmap_sem){----}, at: [<c01878ae>] sys_mlockall+0x4e/0xb0 stack backtrace: Pid: 1103, comm: lvm Not tainted 2.6.28-rc2-mm1 #2 Call Trace: [<c01555fc>] print_circular_bug_tail+0x7c/0xd0 [<c0155bff>] validate_chain+0x5af/0x1070 [<c040f7e0>] dev_status+0x0/0x50 [<c0156923>] __lock_acquire+0x263/0xa10 [<c015714c>] lock_acquire+0x7c/0xb0 [<c0130789>] get_online_cpus+0x29/0x50 [<c04f8b55>] mutex_lock_nested+0xa5/0x2f0 [<c0130789>] get_online_cpus+0x29/0x50 [<c0130789>] get_online_cpus+0x29/0x50 [<c017bc30>] lru_add_drain_per_cpu+0x0/0x10 [<c0130789>] get_online_cpus+0x29/0x50 [<c0140cf2>] schedule_on_each_cpu+0x32/0xe0 [<c0187095>] __mlock_vma_pages_range+0x85/0x2c0 [<c0156945>] __lock_acquire+0x285/0xa10 [<c0188f09>] vma_merge+0xa9/0x1d0 [<c0187450>] mlock_fixup+0x180/0x200 [<c0187548>] do_mlockall+0x78/0x90 [<c01878e1>] sys_mlockall+0x81/0xb0 [<c010355a>] syscall_call+0x7/0xb Signed-off-by:KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Tested-by:
Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Hugh Dickins <hugh@veritas.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
Masami Hiramatsu authored
__register_kprobe() can be preempted after checking probing address but before module_text_address() or try_module_get(), and in this interval the module can be unloaded. In that case, try_module_get(probed_mod) will access to invalid address, or kprobe will probe invalid address. This patch uses preempt_disable() to protect it and uses __module_text_address() and __kernel_text_address(). Signed-off-by:
Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by:
-
Li Zefan authored
With this change, control file 'freezer.state' doesn't exist in root cgroup, making root cgroup unfreezable. I think it's reasonable to disallow freeze tasks in the root cgroup. And then we can avoid fork overhead when freezer subsystem is compiled but not used. Also make writing invalid value to freezer.state returns EINVAL rather than EIO. This is more consistent with other cgroup subsystem. Signed-off-by:
Li Zefan <lizf@cn.fujitsu.com> Acked-by:
Paul Menage <menage@google.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Paul Menage <menage@google.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: "Serge E. Hallyn" <serue@us.ibm.com> Signed-off-by:
-
Li Zefan authored
In theory the task can be moved to another cgroup and the freezer will be freed right after task_lock is dropped, so the lock results in zero protection. But in the case of freezer_fork() no lock is needed, since the task is not in tasklist yet so it won't be moved to another cgroup, so task->cgroups won't be changed or invalidated. Signed-off-by:
-
John Linn authored
This driver supports the Xilinx XPS GPIO IP core which has the typical GPIO features. Signed-off-by:
Kiran Sutariya <kirans@xilinx.com> Signed-off-by:
John Linn <john.linn@xilinx.com> Cc: David Brownell <david-b@pacbell.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Cc: "Grant Likely" <grant.likely@secretlab.ca> Cc: <avorontsov@ru.mvista.com> Signed-off-by:
-
David Rientjes authored
If all allowable memory is unreclaimable, it is possible to loop forever in the page allocator for ~__GFP_NORETRY allocations. During this time, it is also possible for a task's cpuset to expand its set of allowable nodes so that it now includes free memory. The cached copy of this set, current->mems_allowed, is stale, however, since there has not been a subsequent call to cpuset_update_task_memory_state(). The cached copy of the set of allowable nodes is now updated in the page allocator's slow path so the additional memory is available to get_page_from_freelist(). [akpm@linux-foundation.org: add comment] Signed-off-by:
David Rientjes <rientjes@google.com> Cc: Paul Menage <menage@google.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by:
-
Darrick J. Wong authored
It turns out that edac_mc_del_mc will kobject_put the last kref on the mci object. If the timing is just right, that means that the mci object is freed before before i5000_remove_one has a chance to free the resources associated with it, causing a null pointer exceptions when unloading the driver. Insert a kobject_{get,put} pair so that this doesn't happen. Signed-off-by: -
Darrick J. Wong authored
It turns out that if one registers a struct platform_device, the platform device code expects that platform_device.device->driver points to a struct driver inside a struct platform_driver. This is not the case with the ipmi-si, ipmi-msghandler and ibmaem drivers, which causes the suspend/resume hook functions to jump off into nowhere, causing a crash. Make this assumption hold true for these three drivers. Signed-off-by:
Corey Minyard <cminyard@mvista.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Greg KH <greg@kroah.com> Cc: <stable@kernel.org> Signed-off-by:
-
Nicolas Ferre authored
Changed because old the definition of unsigned long cannot be negative. Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Reported-by:
Roel Kluin <roel.kluin@gmail.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Andrew Victor <linux@maxim.org.za> Signed-off-by:
-
Henrik Rydberg authored
This patch adds accelerometer and temperature sensor support for Macbook 4. Signed-off-by:
Henrik Rydberg <rydberg@euromail.se> Cc: Nicolas Boichat <nicolas@boichat.ch Signed-off-by:
-
Adam Litke authored
Oops. Part of the hugetlb private reservation code was not fully converted to use hstates. When a huge page must be unmapped from VMAs due to a failed COW, HPAGE_SIZE is used in the call to unmap_hugepage_range() regardless of the page size being used. This works if the VMA is using the default huge page size. Otherwise we might unmap too much, too little, or trigger a BUG_ON. Rare but serious -- fix it. Signed-off-by:
Adam Litke <agl@us.ibm.com> Cc: Jon Tollefson <kniht@linux.vnet.ibm.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: bnx2: fix poll_controller to pass proper structures and check all rx queues niu: Fix readq implementation when architecture does not provide one. hostap: pad the skb->cb usage in lieu of a proper fix rtl8187 : support for Sitecom WL-168 0001 v4 mac80211: fix notify_mac function rtl8187: Add Abocom USB ID net: put_cmsg_compat + SO_TIMESTAMP[NS]: use same name for value as caller tcp_htcp: last_cong bug fix [netdrvr] smc911x: fix for driver resume (and compilation warning) RDMA/cxgb3: deadlock in iw_cxgb3 can cause hang when configuring interface. cxgb3 - Limit multiqueue setting to msi-x cxgb3 - eeprom read fixes myri10ge: fix stop/go ordering even more
-
Neil Horman authored
Fix bnx2 so that netpoll works properly. Specifically: 1) Fix parameters to bnx2_interrupt to be a struct bnx2_napi rather than a struct net_device 2) Fix poll_controller method to check every queue in the rx case so frames aren't missed Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 12 Nov, 2008 15 commits
-
-
-
David S. Miller authored
This fixes a TX hang reported by Jesper Dangaard Brouer. When an architecutre cannot provide a fully functional 64-bit atomic readq/writeq, the driver must implement it's own. This is because only the driver can say whether doing something like using two 32-bit reads to implement the full 64-bit read will actually work properly. In particular one of the issues is whether the top 32-bits or the bottom 32-bits of the 64-bit register should be read first. There could be side effects, and in fact that is exactly the problem here. The TX_CS register has counters in the upper 32-bits and state bits in the lower 32-bits. A read clears the state bits. We would read the counter half before the state bit half. That first read would clear the state bits, and then the driver thinks that no interrupts are pending because the interrupt indication state bits are seen clear every time. Fix this by reading the bottom half before the upper half. Tested-by:
Jesper Dangaard Brouer <jdb@comx.dk> Signed-off-by:
-
Johannes Berg authored
Like mac80211 did, this driver makes 'clever' use of skb->cb to pass information along with an skb as it is requeued from the virtual device to the physical wireless device. Unfortunately, that trick no longer works... Unlike mac80211, code complexity and driver apathy makes this hack the best option we have in the short run. Hopefully someone will eventually be motivated to code a proper fix before all the effected hardware dies. (Above text by me. Johannes officially disavows all knowledge of this hack. -- JWL) Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Cc: stable@kernel.org Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Bob Jolliffe authored
the Sitecom 0001 v4 with product id 0x0df6:0028, uses Realtek's RTL8187B and work fine with new 2.6.27 driver. Signed-off-by: -
Johannes Berg authored
The ieee80211_notify_mac() function uses ieee80211_sta_req_auth() which in turn calls ieee80211_set_disassoc() which calls a few functions that need to be able to sleep, so ieee80211_notify_mac() cannot use RCU locking for the interface list and must use rtnl locking instead. Signed-off-by:
-
Ivan Kuten authored
Signed-off-by:
Ivan Kuten <ivan.kuten@promwad.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Linus Torvalds authored
Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: hrtimer: clean up unused callback modes
-
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_txLinus Torvalds authored
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: dmaengine: struct device - replace bus_id with dev_name(), dev_set_name() iop-adma: use iop_paranoia() for debug BUG_ONs iop-adma: add a dummy read to flush next descriptor update
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IPoIB: Fix crash in path_rec_completion() IPoIB: Fix hang in ipoib_flush_paths() IPoIB: Don't enable NAPI when it's already enabled RDMA/cxgb3: Fix deadlock in iw_cxgb3 (hang when configuring interface) IB/ehca: Remove reference to special QP in case of port activation failure IB/mlx4: Set umem field to NULL in mlx4_ib_alloc_fast_reg_mr() mlx4_core: Fix unused variable warning RDMA/nes: Mitigate compatibility issue regarding PCIe write credits RDMA/nes: Fix CQ allocation scheme for multicast receive queue apps RDMA/nes: Correct handling of PBL resources RDMA/nes: Reindent mis-indented spinlocks RDMA/cxgb3: Fix too-big reserved field zeroing in iwch_post_zb_read() IB/ipath: Fix RDMA write with immediate copy of last packet
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Fix IDT/STAC multiple HP detection ALSA: hda - Fix input pin initialization for STAC/IDT codecs ALSA: hda - Add missing analog-mux mixer creation for STAC9200
-
David Howells authored
Don't do misalignment handling for userspace misalignment faults: just generate an appropriate SIGBUS instead. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
David Howells authored
Don't handle the misaligned loading and storing of the SP register as in C code that's most certainly a compiler bug. Signed-off-by:
-
David Howells authored
Support misalignment handling for instructions that have kernel SP-based address operands, including fixing those that include IMM8 or IMM16 displacements. Signed-off-by:
-
David Howells authored
Fix misalignment handling for an address calculated from the sum of two registers. Signed-off-by:
-
David Howells authored
Correctly handle misalignment in MOV instructions with postinc-with-immediate addressing mode operands. In these, the immediate value is the increment to be applied the address register, not the displacement to the address. Signed-off-by:
-
