Reduce the stack overflow warning from 4kB to 2kB now that its been in and
tested for a while.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch removes warnings associated with Ebony MTD related defines.
Please apply.
Signed-off-by: Eugene Surovegin <ebs@ebshome.net>
Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch fixes a bug in the kernel emulation of altivec instructions with
denormalized operands.  The emulation of the vmaddfp and vmnsubfp
instructions was giving the wrong answer because I had the wrong order of
operands to the fmadds and fnmsubs instructions.  This patch fixes it for
both ppc32 and ppc64.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch adds missing exports for __dma_sync and __dma_sync_page (DMA API
helpers for non-coherent cache PPCs).
Signed-off-by: Eugene Surovegin <ebs@ebshome.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Adds documentation of the PPC noltlbs and nobats kernel cmdline parameters.
noltlbs is a new option and nobats never had an entry.
Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch adds emulation in the illegal instruction handler for a couple
of old instructions that are no longer implemented in the PPC970 and later
chips.  This patch adds the code for both ppc32 and ppc64, and cleans up
the ppc64 traps.c a bit, along the lines of the ppc32 code.  It also makes
sure that the ppc64 code generates a SIGTRAP after emulating an instruction
if single-stepping is enabled.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch adds code to the ppc32 alignment exception handler to make it
handle the load/store string and load/store multiple word instructions. 
This is an issue for older CPUs such as the PPC601, which traps on
load/store string instructions which cross a page boundary (newer CPUs
handle this in hardware).  I have a little test program which exercises
this code, so I am reasonably confident it's correct.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This makes the PPC40x lowmem large tlb mapping selectable via a cmdline
option.  This allows use of the normal page-sized mapping so that kernel
text can be read only if desired.
Signed-off-by: Josh Boyer <jwboyer@charter.net>
Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The following patch fixes the situation where the loop condition could
generate a next_dec of zero while exiting the loop.  This is suboptimal on
Classic PPC because it forces another interrupt to occur and reenter the
handler.  It is fatal on Book E cores, because their decrementer is stopped
when writing a zero (Classic interrupts on a 0->-1 transition, Book E
interrupts on a 1->0 transition).  Instead, stay in the loop on a
next_dec==0.
Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch by Vincent Hanquez removes some hard coded offsets for accessing
thread info fields from assembly, uses the normal offset generation
mecanism that we already have for other things instead.
Signed-off-by: Vincent Hanquez <tab@snarc.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Make i386 die() more resilient against recursive errors, almost a cut
and paste of the ia64 die() routine.  Much of the patch is indentation
changes.

Mainly to make it easier to add crash, lcrash, kmsgdump or other RAS patches. 
They are invoked from die() and if they crash themselves, we have to avoid
recursive loops in die().
Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

I made a patch for debugging with the help of NMI trigger switch.
When kernel hangs severely, keyboard operation(e.g.Ctrl-Alt-Del)
doesn't work properly. This patch enables debugging information
to be displayed on console in this case.
I think this feature is necessary as standard functionality.
Please feel free to use this patch and let me know if you have
any comments.

Background:

When a trouble occurs in kernel, we usually begin to investigate
with following information:
 - panic >> panic message.
 - oops >> CPU registers and stack trace.
 - hang >> **NONE** no standard method established.

How it works:

Most IA32 servers have a NMI switch that fires NMI interrupt up.
The NMI interrupt can interrupt even if kernel is serious state,
for example deadlock under the interrupt disabled.
When the NMI switch is pressed after this feature is activated,
CPU registers and stack trace are displayed on console and then
panic occurs.
This feature is activated or deactivated with sysctl.

On IA32 architecture, only the following are defined as reason
of NMI interrupt:
 - memory parity error
 - I/O check error
The reason code of NMI switch is not defined, so this patch assumes
that all undefined NMI interrupts are fired by MNI switch.
However, oprofile and NMI watchdog also use undefined NMI interrupt.
Therefore this feature cannot be used at the same time with oprofile
and NMI watchdog. This feature hands NMI interrupt over to oprofile
and NMI watchdog. So, when they have been activated, this feature
doesn't work even if it is activated.

Supported architecture:

IA32

Setup:

Set up the system control parameter as follows:

# sysctl -w kernel.unknown_nmi_panic=1
kernel.unknown_nmi_panic = 1

If the NMI switch is pressed, CPU registers and stack trace will
be displayed on console and then panic occurs.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Reading the contents of a module_param_string through sysfs currently
oopses because the param_get_charp() function cannot operate on a
kparam_string struct.  This introduces the required param_get_string.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Races have been observed between excec-time overwriting of task->comm and
/proc accesses to the same data.  This causes environment string
information to appear in /proc.

Fix that up by taking task_lock() around updates to and accesses to
task->comm.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

add_pin_to_irq() should not be __init; it is used after init code.
Signed-off-by: Randy Dunlap <rddunlap@osdl.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

while debugging/improving scheduling latencies i got the following
strange latency report from Lee Revell:

  http://krustophenia.net/testresults.php?dataset=2.6.8.1-P6#/var/www/2.6.8.1-P6

this trace shows a 120 usec latency caused by XFree86, on a 600 MHz x86
system. Looking closer reveals:

  00000002 0.006ms (+0.003ms): __switch_to (schedule)
  00000002 0.088ms (+0.082ms): finish_task_switch (schedule)

it took more than 80 usecs for XFree86 to do a context-switch!

it turns out that the reason for this (massive) context-switching
overhead is the following change in 2.6.8:

      [PATCH] larger IO bitmaps

To demonstrate the effect of this change i've written ioperm-latency.c
(attached), which gives the following on vanilla 2.6.8.1:

  # ./ioperm-latency
  default no ioperm:             scheduling latency: 2528 cycles
  turning on port 80 ioperm:     scheduling latency: 10563 cycles
  turning on port 65535 ioperm:  scheduling latency: 10517 cycles

the ChangeSet says:

        Now, with the lazy bitmap allocation and per-CPU TSS, this
        will really not drain any resources I think.

this is plain wrong. An increase in the IO bitmap size introduces
per-context-switch overhead as well: we now have to copy an 8K bitmap
every time XFree86 context-switches - even though XFree86 never uses
ports higher than 1024! I've straced XFree86 on a number of x86 systems
and in every instance ioperm() was used - so i'd say the majority of x86
Linux systems running 2.6.8.1 are affected by this problem.

This not only causes lots of overhead, it also trashes ~16K out of the
L1 and L2 caches, on every context-switch. It's as if XFree86 did a L1
cache flush on every context-switch ...

the simple solution would be to revert IO_BITMAP_BITS back to 1024 and
release 2.6.8.2?

I've implemented another solution as well, which tracks the
highest-enabled port # for every task and does the copying of the bitmap
intelligently. (patch attached) The patched kernel gives:

  # ./ioperm-latency
  default no ioperm:             scheduling latency: 2423 cycles
  turning on port 80 ioperm:     scheduling latency: 2503 cycles
  turning on port 65535 ioperm:  scheduling latency: 10607 cycles

this is much more acceptable - the full overhead only occurs in the very
unlikely event of a task using the high ioport range. X doesnt suffer
any significant overhead.

(tracking the maximum allowed port # also allows a simplification of
io_bitmap handling: e.g. we dont do the invalid-offset trick anymore -
the IO bitmap in the TSS is always valid and secure.)

I tested the patch on x86 SMP and UP, it works fine for me. I tested
boundary conditions as well, it all seems secure.

	Ingo

#include <errno.h>
#include <stdio.h>
#include <sched.h>
#include <signal.h>
#include <sys/io.h>
#include <stdlib.h>
#include <unistd.h>
#include <linux/unistd.h>

#define CYCLES(x) asm volatile ("rdtsc" :"=a" (x)::"edx")

#define __NR_sched_set_affinity 241
_syscall3 (int, sched_set_affinity, pid_t, pid, unsigned int, mask_len, unsigned long *, mask)

/*
 * Use a pair of RT processes bound to the same CPU to measure
 * context-switch overhead:
 */
static void measure(void)
{
	unsigned long i, min = ~0UL, pid, mask = 1, t1, t2;

	sched_set_affinity(0, sizeof(mask), &mask);

	pid = fork();
	if (!pid)
		for (;;) {
			asm volatile ("sti; nop; cli");
			sched_yield();
		}

	sched_yield();
	for (i = 0; i < 100; i++) {
		asm volatile ("sti; nop; cli");
		CYCLES(t1);
		sched_yield();
		CYCLES(t2);
		if (i > 10) {
			if (t2 - t1 < min)
				min = t2 - t1;
		}
	}
	asm volatile ("sti");

	kill(pid, 9);
	printf("scheduling latency: %ld cycles\n", min);
	sched_yield();
}

int main(void)
{
	struct sched_param p = { sched_priority: 2 };
	unsigned long mask = 1;

	if (iopl(3)) {
		printf("need to run as root!\n");
		exit(-1);
	}
	sched_setscheduler(0, SCHED_FIFO, &p);
	sched_set_affinity(0, sizeof(mask), &mask);

	printf("default no ioperm:             ");
	measure();

	printf("turning on port 80 ioperm:     ");
	ioperm(0x80,1,1);
	measure();

	printf("turning on port 65535 ioperm:  ");
	if (ioperm(0xffff,1,1))
		printf("FAILED - older kernel.\n");
	else
		measure();

	return 0;
}
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed single-bit bitfields really are a pretty strange
thing to have. They work, but it wasn't really intentional.

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

net/ipv4/proc.c was updated to use a new mechanism for outputting
/proc/net/snmp and /proc/net/netstat.

However, a superfluous '\n' snuck in, breaking `netstat -s`

into ppc970.osdl.org:/home/torvalds/v2.6/linux

This one from Dave Jones, who read the Intel docs even
more.

into ppc970.osdl.org:/home/torvalds/v2.6/linux

It seems that on some OldWolrd macs, we don't get the OF stdout device,
thus the new set_preferred_console() dies at boot trying to dereference
a NULL pointer.

Trivial fix.

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into pobox.com:/spare/repo/netdev-2.6/ALL

In 2.5.18 some minix-specific stuff was moved to the minix subdirectory
where it belonged.  However, a typo crept in, causing inode disk usage
to be incorrectly reported.  A few people have complained, but so far
not sufficiently loudly.
Signed-off-by: Andries Brouwer <Andries.Brouwer@cwi.nl>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

There are a couple of cache descriptors in the current Intel manuals
missing from our tables at least one of which appears in an actual
processor in the real world.

A silly bug prevented certain events from being used.

into ppc970.osdl.org:/home/torvalds/v2.6/linux

This got accidentally reverted in merging HPT372N support. The following
patch restores 50Mhz on the HPT374 using the 370a clocking tables.

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Fix some Kconfig dependencies on PA-RISC (Grant Grundler, Martin Schulze,
					  Helge Deller, Matthew Wilcox)

Define acpi_noirq on ia64 since it's used now in pci_link.c.  All ia64
machines use ACPI, so we can just define it to 0 like we do for acpi_disabled 
and acpi_pci_disabled.
Signed-off-by: Jesse Barnes <jbarnes@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

PA-RISC sound updates:

 - Do a DAC/ADC reset for sampling rate changes in ad1889 (Randolph Chung)
 - Set the ad1889 interrupt configuration properly (Randolph Chung)
 - Fix dependency for the OSS Harmony driver (Thibaut Varene)
 - Forward port Stuart Brady's 2.4 Harmony driver patches (Thibaut Varene)
   - Fix sample skipping (Stuart Brady)
   - Prevent harmony_silence being called wrongly (Stuart Brady)
   - Fix crash caused by buf_to_fill becoming -1 (Stuart Brady)
   - Improve naming of mixer channels (Stuart Brady)
   - Implement SNDCTL_DSP_CHANNELS ioctl (Stuart Brady)
   - Improve toggling the recording source (Stuart Brady)
   - Sanity check MIXER_WRITE volume levels (Stuart Brady)
   - Fix MIXER_READ right_level return (Stuart Brady)
   - Reject AFMT_S16_LE format (Stuart Brady)
 - Fail OSS Harmony initialisation if no irq (Helge Deller)
 - Fix typos in ALSA Harmony (Andy Walker, Grant Grundler, Stuart Brady)

From: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Dave Jones <davej@redhat.com>

The watchdog drivers use a VFS implementation and thus should not be
lseek'able, so we put a '.llseek = no_llseek' in the file_operations
structure.

cpu5wdt also contains a VFS and thus should be "nonseekable_open"

Fix example program in pcwd-watchdog.txt document.