- 27 Mar, 2023 8 commits
-
-
Álvaro Fernández Rojas authored
Implement phy_read16() and phy_write16() ops for B53 MMAP to avoid accessing B53_PORT_MII_PAGE registers which hangs the device. This access should be done through the MDIO Mux bus controller. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Oleksij Rempel authored
The KSZ9131RNX incorrectly shows EEE capabilities in its registers. Although the "EEE control and capability 1" (Register 3.20) is set to 0, indicating no EEE support, the "EEE advertisement 1" (Register 7.60) is set to 0x6, advertising EEE support for 1000BaseT/Full and 100BaseT/Full. This inconsistency causes PHYlib to assume there is no EEE support, preventing control over EEE advertisement, which is enabled by default. This patch resolves the issue by utilizing the ksz9477_get_features() function to correctly set the EEE capabilities for the KSZ9131RNX. This adjustment allows proper control over EEE advertisement and ensures accurate representation of the device's capabilities. Fixes: 8b68710a ("net: phy: start using genphy_c45_ethtool_get/set_eee()") Reported-by: Marek Vasut <marex@denx.de> Tested-by: Marek Vasut <marex@denx.de> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stefano Garzarella authored
pkt_list_lock was used before commit 71dc9ec9 ("virtio/vsock: replace virtio_vsock_pkt with sk_buff") to protect the packet queue. After that commit we switched to sk_buff and we are using sk_buff_head.lock in almost every place to protect the packet queue except in vsock_loopback_work() when we call skb_queue_splice_init(). As reported by syzbot, this caused unlocked concurrent access to the packet queue between vsock_loopback_work() and vsock_loopback_cancel_pkt() since it is not holding pkt_list_lock. With the introduction of sk_buff_head, pkt_list_lock is redundant and can cause confusion, so let's remove it and use sk_buff_head.lock everywhere to protect the packet queue access. Fixes: 71dc9ec9 ("virtio/vsock: replace virtio_vsock_pkt with sk_buff") Cc: bobby.eshleman@bytedance.com Reported-and-tested-by: syzbot+befff0a9536049e7902e@syzkaller.appspotmail.com Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Bobby Eshleman <bobby.eshleman@bytedance.com> Reviewed-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Russell King says: ==================== Constify a few sfp/phy fwnodes This series constifies a bunch of fwnode_handle pointers that are only used to refer to but not modify the contents of the fwnode structures. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King (Oracle) authored
fwnode_get_phy_node() does not motify the fwnode structure, so make the argument const, Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King (Oracle) authored
Constify sfp-bus internal fwnode uses, since we do not modify the fwnode structures. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King (Oracle) authored
sfp_bus_find_fwnode() does not write to the fwnode, so let's make it const. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Faicker Mo authored
The failover txq is inited as 16 queues. when a packet is transmitted from the failover device firstly, the failover device will select the queue which is returned from the primary device if the primary device is UP and running. If the primary device txq is bigger than the default 16, it can lead to the following warning: eth0 selects TX queue 18, but real number of TX queues is 16 The warning backtrace is: [ 32.146376] CPU: 18 PID: 9134 Comm: chronyd Tainted: G E 6.2.8-1.el7.centos.x86_64 #1 [ 32.147175] Hardware name: Red Hat KVM, BIOS 1.10.2-3.el7_4.1 04/01/2014 [ 32.147730] Call Trace: [ 32.147971] <TASK> [ 32.148183] dump_stack_lvl+0x48/0x70 [ 32.148514] dump_stack+0x10/0x20 [ 32.148820] netdev_core_pick_tx+0xb1/0xe0 [ 32.149180] __dev_queue_xmit+0x529/0xcf0 [ 32.149533] ? __check_object_size.part.0+0x21c/0x2c0 [ 32.149967] ip_finish_output2+0x278/0x560 [ 32.150327] __ip_finish_output+0x1fe/0x2f0 [ 32.150690] ip_finish_output+0x2a/0xd0 [ 32.151032] ip_output+0x7a/0x110 [ 32.151337] ? __pfx_ip_finish_output+0x10/0x10 [ 32.151733] ip_local_out+0x5e/0x70 [ 32.152054] ip_send_skb+0x19/0x50 [ 32.152366] udp_send_skb.isra.0+0x163/0x3a0 [ 32.152736] udp_sendmsg+0xba8/0xec0 [ 32.153060] ? __folio_memcg_unlock+0x25/0x60 [ 32.153445] ? __pfx_ip_generic_getfrag+0x10/0x10 [ 32.153854] ? sock_has_perm+0x85/0xa0 [ 32.154190] inet_sendmsg+0x6d/0x80 [ 32.154508] ? inet_sendmsg+0x6d/0x80 [ 32.154838] sock_sendmsg+0x62/0x70 [ 32.155152] ____sys_sendmsg+0x134/0x290 [ 32.155499] ___sys_sendmsg+0x81/0xc0 [ 32.155828] ? _get_random_bytes.part.0+0x79/0x1a0 [ 32.156240] ? ip4_datagram_release_cb+0x5f/0x1e0 [ 32.156649] ? get_random_u16+0x69/0xf0 [ 32.156989] ? __fget_light+0xcf/0x110 [ 32.157326] __sys_sendmmsg+0xc4/0x210 [ 32.157657] ? __sys_connect+0xb7/0xe0 [ 32.157995] ? __audit_syscall_entry+0xce/0x140 [ 32.158388] ? syscall_trace_enter.isra.0+0x12c/0x1a0 [ 32.158820] __x64_sys_sendmmsg+0x24/0x30 [ 32.159171] do_syscall_64+0x38/0x90 [ 32.159493] entry_SYSCALL_64_after_hwframe+0x72/0xdc Fix that by reducing txq number as the non-existent primary-dev does. Fixes: cfc80d9a ("net: Introduce net_failover driver") Signed-off-by: Faicker Mo <faicker.mo@ucloud.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 25 Mar, 2023 11 commits
-
-
ChunHao Lin authored
When link speed is 10 Mbps and temperature is under -20°C, RTL8168H and RTL8107E may have rx crc error. Disable phy 10 Mbps pll off to fix this issue. Fixes: 6e1d0b89 ("r8169:add support for RTL8168H and RTL8107E") Signed-off-by: ChunHao Lin <hau@realtek.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Oleksij Rempel says: ==================== net: dsa: microchip: ksz8: fixes for stable changes v2: - use proper Fixes tag - add Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com> on all reviewed patches except the ksz8863_smi patch. These fixes address issues such as incomplete FDB extraction, incorrect FID extraction and configuration, incorrect timestamp extraction, and ghost entry extraction from an empty dynamic MAC table. These updates ensure proper functioning of the FDB/MDB functionality for the ksz8863/ksz8873 series of chips. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Oleksij Rempel authored
FID is directly mapped to VID. However, configuring a MAC address with a VID != 0 resulted in incorrect configuration due to an incorrect bit mask. This kernel commit fixed the issue by correcting the bit mask and ensuring proper configuration of MAC addresses with non-zero VID. Fixes: 4b20a07e ("net: dsa: microchip: ksz8795: add support for ksz88xx chips") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Oleksij Rempel authored
Current regmap bulk access is broken, resulting to wrong reads/writes if ksz_read64/ksz_write64 functions are used. Mostly this issue was visible by using ksz8_fdb_dump(), which returned corrupt MAC address. The reason is that regmap was configured to have max_raw_read/write, even if ksz8863_mdio_read/write functions are able to handle unlimited read/write accesses. On ksz_read64 function we are using multiple 32bit accesses by incrementing each access by 1 instead of 4. Resulting buffer had 01234567.12345678 instead of 01234567.89abcdef. We have multiple ways to fix it: - enable 4 byte alignment for 32bit accesses. Since the HW do not have this requirement. It will break driver. - disable max_raw_* limit. This patch is removing max_raw_* limit for regmap accesses in ksz8863_smi. Fixes: 60a36476 ("net: dsa: microchip: Add Microchip KSZ8863 SMI based driver support") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Oleksij Rempel authored
net: dsa: microchip: ksz8: ksz8_fdb_dump: avoid extracting ghost entry from empty dynamic MAC table. If the dynamic MAC table is empty, we will still extract one outdated entry. Fix it by using correct bit offset. Fixes: 4b20a07e ("net: dsa: microchip: ksz8795: add support for ksz88xx chips") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Oleksij Rempel authored
We are using wrong offset, so we will get not a timestamp. Fixes: 4b20a07e ("net: dsa: microchip: ksz8795: add support for ksz88xx chips") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Oleksij Rempel authored
Current ksz8_fdb_dump() is able to extract only max 249 entries on the ksz8863/ksz8873 series of switches. This happened due to wrong bit mask and offset calculation. This commit corrects the issue and allows for the complete extraction of all 1024 entries. Fixes: 4b20a07e ("net: dsa: microchip: ksz8795: add support for ksz88xx chips") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Oleksij Rempel authored
Before this patch, the ksz8_fdb_dump() function had several issues, such as uninitialized variables and incorrect usage of source port as a bit mask. These problems caused inaccurate reporting of vid information and port assignment in the bridge fdb. Fixes: e587be75 ("net: dsa: microchip: update fdb add/del/dump in ksz_common") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
SongJingyi authored
Smatch complains that: drivers/ptp/ptp_qoriq.c ptp_qoriq_probe() warn: 'base' from ioremap() not released. Fix this by revising the parameter from 'ptp_qoriq->base' to 'base'. This is only a bug if ptp_qoriq_init() returns on the first -ENODEV error path. For other error paths ptp_qoriq->base and base are the same. And this change makes the code more readable. Fixes: 7f4399ba ("ptp_qoriq: fix NULL access if ptp dt node missing") Signed-off-by: SongJingyi <u201912584@hust.edu.cn> Reviewed-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn> Link: https://lore.kernel.org/r/20230324031406.1895159-1-u201912584@hust.edu.cnSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Ronak Doshi authored
Currently, vmxnet3 uses GRO callback only if LRO is disabled. However, on smartNic based setups where UPT is supported, LRO can be enabled from guest VM but UPT devicve does not support LRO as of now. In such cases, there can be performance degradation as GRO is not being done. This patch fixes this issue by calling GRO API when UPT is enabled. We use updateRxProd to determine if UPT mode is active or not. To clarify few things discussed over the thread: The patch is not neglecting any feature bits nor disabling GRO. It uses GRO callback when UPT is active as LRO is not available in UPT. GRO callback cannot be used as default for all cases as it degrades performance for non-UPT cases or for cases when LRO is already done in ESXi. Cc: stable@vger.kernel.org Fixes: 6f91f4ba ("vmxnet3: add support for capability registers") Signed-off-by: Ronak Doshi <doshir@vmware.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230323200721.27622-1-doshir@vmware.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Ahmad Fatoum authored
The probe function sets priv->chip_data to (void *)priv + sizeof(*priv) with the expectation that priv has enough trailing space. However, only realtek-smi actually allocated this chip_data space. Do likewise in realtek-mdio to fix out-of-bounds accesses. These accesses likely went unnoticed so far, because of an (unused) buf[4096] member in struct realtek_priv, which caused kmalloc to round up the allocated buffer to a big enough size, so nothing of value was overwritten. With a different allocator (like in the barebox bootloader port of the driver) or with KASAN, the memory corruption becomes quickly apparent. Fixes: aac94001 ("net: dsa: realtek: add new mdio interface for drivers") Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Luiz Angelo Daros de Luca <luizluca@gmail.com> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Link: https://lore.kernel.org/r/20230323103735.2331786-1-a.fatoum@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 24 Mar, 2023 6 commits
-
-
Josua Mayer authored
dp83869 internally uses a look-up table for mapping supported delays in nanoseconds to register values. When specific delays are defined in device-tree, phy_get_internal_delay does the lookup automatically returning an index. The default case wrongly assigns the nanoseconds value from the lookup table, resulting in numeric value 2000 applied to delay configuration register, rather than the expected index values 0-7 (7 for 2000). Ultimately this issue broke RX for 1Gbps links. Fix default delay configuration by assigning the intended index value directly. Cc: stable@vger.kernel.org Fixes: 736b25af ("net: dp83869: Add RGMII internal delay configuration") Co-developed-by: Yazan Shhady <yazan.shhady@solid-run.com> Signed-off-by: Yazan Shhady <yazan.shhady@solid-run.com> Signed-off-by: Josua Mayer <josua@solid-run.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230323102536.31988-1-josua@solid-run.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Íñigo Huguet authored
At NIC reset, some offload features related to encapsulated traffic might have changed (this mainly happens if the firmware-variant is changed with the sfboot userspace tool). Because of this, features are checked and set again at reset time. However, this was not done right, and some features were improperly overwritten at NIC reset: - Tunneled IPv6 segmentation was always disabled - Features disabled with ethtool were reenabled - Features that becomes unsupported after the reset were not disabled Also, checking if the device supports IPV6_CSUM to enable TSO6 is no longer necessary because all currently supported devices support it. Additionally, move the assignment of some other features to the EF10_OFFLOAD_FEATURES macro, like it is done in ef100, leaving the selection of features in efx_pci_probe_post_io a bit cleaner. Fixes: ffffd245 ("sfc: correctly advertise tunneled IPv6 segmentation") Fixes: 24b2c375 ("sfc: advertise encapsulated offloads on EF10") Reported-by: Tianhao Zhao <tizhao@redhat.com> Suggested-by: Jonathan Cooper <jonathan.s.cooper@amd.com> Tested-by: Jonathan Cooper <jonathan.s.cooper@amd.com> Signed-off-by: Íñigo Huguet <ihuguet@redhat.com> Acked-by: Edward Cree <ecree.xilinx@gmail.com> Link: https://lore.kernel.org/r/20230323083417.7345-1-ihuguet@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jiawen Wu authored
There is 64-bit interrupt cause register for txgbe. Fix to clear upper 32 bits. Fixes: 3f703186 ("net: libwx: Add irq flow functions") Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20230322103632.132011-1-jiawenwu@trustnetic.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from bpf, wifi and bluetooth. Current release - regressions: - wifi: mt76: mt7915: add back 160MHz channel width support for MT7915 - libbpf: revert poisoning of strlcpy, it broke uClibc-ng Current release - new code bugs: - bpf: improve the coverage of the "allow reads from uninit stack" feature to fix verification complexity problems - eth: am65-cpts: reset PPS genf adj settings on enable Previous releases - regressions: - wifi: mac80211: serialize ieee80211_handle_wake_tx_queue() - wifi: mt76: do not run mt76_unregister_device() on unregistered hw, fix null-deref - Bluetooth: btqcomsmd: fix command timeout after setting BD address - eth: igb: revert rtnl_lock() that causes a deadlock - dsa: mscc: ocelot: fix device specific statistics Previous releases - always broken: - xsk: add missing overflow check in xdp_umem_reg() - wifi: mac80211: - fix QoS on mesh interfaces - fix mesh path discovery based on unicast packets - Bluetooth: - ISO: fix timestamped HCI ISO data packet parsing - remove "Power-on" check from Mesh feature - usbnet: more fixes to drivers trusting packet length - wifi: iwlwifi: mvm: fix mvmtxq->stopped handling - Bluetooth: btintel: iterate only bluetooth device ACPI entries - eth: iavf: fix inverted Rx hash condition leading to disabled hash - eth: igc: fix the validation logic for taprio's gate list - dsa: tag_brcm: legacy: fix daisy-chained switches Misc: - bpf: adjust insufficient default bpf_jit_limit to account for growth of BPF use over the last 5 years - xdp: bpf_xdp_metadata() use EOPNOTSUPP as unique errno indicating no driver support" * tag 'net-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits) Bluetooth: HCI: Fix global-out-of-bounds Bluetooth: mgmt: Fix MGMT add advmon with RSSI command Bluetooth: btsdio: fix use after free bug in btsdio_remove due to unfinished work Bluetooth: L2CAP: Fix responding with wrong PDU type Bluetooth: btqcomsmd: Fix command timeout after setting BD address Bluetooth: btinel: Check ACPI handle for NULL before accessing net: mdio: thunder: Add missing fwnode_handle_put() net: dsa: mt7530: move setting ssc_delta to PHY_INTERFACE_MODE_TRGMII case net: dsa: mt7530: move lowering TRGMII driving to mt7530_setup() net: dsa: mt7530: move enabling disabling core clock to mt7530_pll_setup() net: asix: fix modprobe "sysfs: cannot create duplicate filename" gve: Cache link_speed value from device tools: ynl: Fix genlmsg header encoding formats net: enetc: fix aggregate RMON counters not showing the ranges Bluetooth: Remove "Power-on" check from Mesh feature Bluetooth: Fix race condition in hci_cmd_sync_clear Bluetooth: btintel: Iterate only bluetooth device ACPI entries Bluetooth: ISO: fix timestamped HCI ISO data packet parsing Bluetooth: btusb: Remove detection of ISO packets over bulk Bluetooth: hci_core: Detect if an ACL packet is in fact an ISO packet ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: "A few more fixes, the zoned accounting fix is spread across a few patches, preparatory and the actual fixes: - zoned mode: - fix accounting of unusable zone space - fix zone activation condition for DUP profile - preparatory patches - improved error handling of missing chunks - fix compiler warning" * tag 'for-6.3-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: zoned: drop space_info->active_total_bytes btrfs: zoned: count fresh BG region as zone unusable btrfs: use temporary variable for space_info in btrfs_update_block_group btrfs: rename BTRFS_FS_NO_OVERCOMMIT to BTRFS_FS_ACTIVE_ZONE_TRACKING btrfs: zoned: fix btrfs_can_activate_zone() to support DUP profile btrfs: fix compiler warning on SPARC/PA-RISC handling fscrypt_setup_filename btrfs: handle missing chunk mapping more gracefully
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Four small fixes, three in drivers. The core fix adds a UFS device to an existing quirk to avoid a huge delay on boot" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: scsi_dh_alua: Fix memleak for 'qdata' in alua_activate() scsi: qla2xxx: Synchronize the IOCB count to be in order scsi: qla2xxx: Perform lockless command completion in abort path scsi: core: Add BLIST_SKIP_VPD_PAGES for SKhynix H28U74301AMR
-
- 23 Mar, 2023 15 commits
-
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski authored
Daniel Borkmann says: ==================== pull-request: bpf 2023-03-23 We've added 8 non-merge commits during the last 13 day(s) which contain a total of 21 files changed, 238 insertions(+), 161 deletions(-). The main changes are: 1) Fix verification issues in some BPF programs due to their stack usage patterns, from Eduard Zingerman. 2) Fix to add missing overflow checks in xdp_umem_reg and return an error in such case, from Kal Conley. 3) Fix and undo poisoning of strlcpy in libbpf given it broke builds for libcs which provided the former like uClibc-ng, from Jesus Sanchez-Palencia. 4) Fix insufficient bpf_jit_limit default to avoid users running into hard to debug seccomp BPF errors, from Daniel Borkmann. 5) Fix driver return code when they don't support a bpf_xdp_metadata kfunc to make it unambiguous from other errors, from Jesper Dangaard Brouer. 6) Two BPF selftest fixes to address compilation errors from recent changes in kernel structures, from Alexei Starovoitov. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: xdp: bpf_xdp_metadata use EOPNOTSUPP for no driver support bpf: Adjust insufficient default bpf_jit_limit xsk: Add missing overflow check in xdp_umem_reg selftests/bpf: Fix progs/test_deny_namespace.c issues. selftests/bpf: Fix progs/find_vma_fail1.c build error. libbpf: Revert poisoning of strlcpy selftests/bpf: Tests for uninitialized stack reads bpf: Allow reads from uninit stack ==================== Link: https://lore.kernel.org/r/20230323225221.6082-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothJakub Kicinski authored
Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - Fix MGMT add advmon with RSSI command - L2CAP: Fix responding with wrong PDU type - Fix race condition in hci_cmd_sync_clear - ISO: Fix timestamped HCI ISO data packet parsing - HCI: Fix global-out-of-bounds - hci_sync: Resume adv with no RPA when active scan * tag 'for-net-2023-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: HCI: Fix global-out-of-bounds Bluetooth: mgmt: Fix MGMT add advmon with RSSI command Bluetooth: btsdio: fix use after free bug in btsdio_remove due to unfinished work Bluetooth: L2CAP: Fix responding with wrong PDU type Bluetooth: btqcomsmd: Fix command timeout after setting BD address Bluetooth: btinel: Check ACPI handle for NULL before accessing Bluetooth: Remove "Power-on" check from Mesh feature Bluetooth: Fix race condition in hci_cmd_sync_clear Bluetooth: btintel: Iterate only bluetooth device ACPI entries Bluetooth: ISO: fix timestamped HCI ISO data packet parsing Bluetooth: btusb: Remove detection of ISO packets over bulk Bluetooth: hci_core: Detect if an ACL packet is in fact an ISO packet Bluetooth: hci_sync: Resume adv with no RPA when active scan ==================== Link: https://lore.kernel.org/r/20230323202335.3380841-1-luiz.dentz@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wirelessJakub Kicinski authored
Kalle Valo says: ==================== wireless fixes for v6.3 Third set of fixes for v6.3. mt76 has two kernel crash fixes and adding back 160 MHz channel support for mt7915. mac80211 has fixes for a race in transmit path and two mesh related fixes. iwlwifi also has fixes for races. * tag 'wireless-2023-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: mac80211: fix mesh path discovery based on unicast packets wifi: mac80211: fix qos on mesh interfaces wifi: iwlwifi: mvm: protect TXQ list manipulation wifi: iwlwifi: mvm: fix mvmtxq->stopped handling wifi: mac80211: Serialize ieee80211_handle_wake_tx_queue() wifi: mwifiex: mark OF related data as maybe unused wifi: mt76: connac: do not check WED status for non-mmio devices wifi: mt76: mt7915: add back 160MHz channel width support for MT7915 wifi: mt76: do not run mt76_unregister_device() on unregistered hw ==================== Link: https://lore.kernel.org/r/20230323110332.C4FE4C433D2@smtp.kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2Linus Torvalds authored
Pull gfs2 fix from Andreas Gruenbacher: - Reinstate commit 970343cd ("GFS2: free disk inode which is deleted by remote node -V2") as reverting that commit could cause gfs2_put_super() to hang. * tag 'gfs2-v6.3-rc3-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: Reinstate "GFS2: free disk inode which is deleted by remote node -V2"
-
Sungwoo Kim authored
To loop a variable-length array, hci_init_stage_sync(stage) considers that stage[i] is valid as long as stage[i-1].func is valid. Thus, the last element of stage[].func should be intentionally invalid as hci_init0[], le_init2[], and others did. However, amp_init1[] and amp_init2[] have no invalid element, letting hci_init_stage_sync() keep accessing amp_init1[] over its valid range. This patch fixes this by adding {} in the last of amp_init1[] and amp_init2[]. ================================================================== BUG: KASAN: global-out-of-bounds in hci_dev_open_sync ( /v6.2-bzimage/net/bluetooth/hci_sync.c:3154 /v6.2-bzimage/net/bluetooth/hci_sync.c:3343 /v6.2-bzimage/net/bluetooth/hci_sync.c:4418 /v6.2-bzimage/net/bluetooth/hci_sync.c:4609 /v6.2-bzimage/net/bluetooth/hci_sync.c:4689) Read of size 8 at addr ffffffffaed1ab70 by task kworker/u5:0/1032 CPU: 0 PID: 1032 Comm: kworker/u5:0 Not tainted 6.2.0 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04 Workqueue: hci1 hci_power_on Call Trace: <TASK> dump_stack_lvl (/v6.2-bzimage/lib/dump_stack.c:107 (discriminator 1)) print_report (/v6.2-bzimage/mm/kasan/report.c:307 /v6.2-bzimage/mm/kasan/report.c:417) ? hci_dev_open_sync (/v6.2-bzimage/net/bluetooth/hci_sync.c:3154 /v6.2-bzimage/net/bluetooth/hci_sync.c:3343 /v6.2-bzimage/net/bluetooth/hci_sync.c:4418 /v6.2-bzimage/net/bluetooth/hci_sync.c:4609 /v6.2-bzimage/net/bluetooth/hci_sync.c:4689) kasan_report (/v6.2-bzimage/mm/kasan/report.c:184 /v6.2-bzimage/mm/kasan/report.c:519) ? hci_dev_open_sync (/v6.2-bzimage/net/bluetooth/hci_sync.c:3154 /v6.2-bzimage/net/bluetooth/hci_sync.c:3343 /v6.2-bzimage/net/bluetooth/hci_sync.c:4418 /v6.2-bzimage/net/bluetooth/hci_sync.c:4609 /v6.2-bzimage/net/bluetooth/hci_sync.c:4689) hci_dev_open_sync (/v6.2-bzimage/net/bluetooth/hci_sync.c:3154 /v6.2-bzimage/net/bluetooth/hci_sync.c:3343 /v6.2-bzimage/net/bluetooth/hci_sync.c:4418 /v6.2-bzimage/net/bluetooth/hci_sync.c:4609 /v6.2-bzimage/net/bluetooth/hci_sync.c:4689) ? __pfx_hci_dev_open_sync (/v6.2-bzimage/net/bluetooth/hci_sync.c:4635) ? mutex_lock (/v6.2-bzimage/./arch/x86/include/asm/atomic64_64.h:190 /v6.2-bzimage/./include/linux/atomic/atomic-long.h:443 /v6.2-bzimage/./include/linux/atomic/atomic-instrumented.h:1781 /v6.2-bzimage/kernel/locking/mutex.c:171 /v6.2-bzimage/kernel/locking/mutex.c:285) ? __pfx_mutex_lock (/v6.2-bzimage/kernel/locking/mutex.c:282) hci_power_on (/v6.2-bzimage/net/bluetooth/hci_core.c:485 /v6.2-bzimage/net/bluetooth/hci_core.c:984) ? __pfx_hci_power_on (/v6.2-bzimage/net/bluetooth/hci_core.c:969) ? read_word_at_a_time (/v6.2-bzimage/./include/asm-generic/rwonce.h:85) ? strscpy (/v6.2-bzimage/./arch/x86/include/asm/word-at-a-time.h:62 /v6.2-bzimage/lib/string.c:161) process_one_work (/v6.2-bzimage/kernel/workqueue.c:2294) worker_thread (/v6.2-bzimage/./include/linux/list.h:292 /v6.2-bzimage/kernel/workqueue.c:2437) ? __pfx_worker_thread (/v6.2-bzimage/kernel/workqueue.c:2379) kthread (/v6.2-bzimage/kernel/kthread.c:376) ? __pfx_kthread (/v6.2-bzimage/kernel/kthread.c:331) ret_from_fork (/v6.2-bzimage/arch/x86/entry/entry_64.S:314) </TASK> The buggy address belongs to the variable: amp_init1+0x30/0x60 The buggy address belongs to the physical page: page:000000003a157ec6 refcount:1 mapcount:0 mapping:0000000000000000 ia flags: 0x200000000001000(reserved|node=0|zone=2) raw: 0200000000001000 ffffea0005054688 ffffea0005054688 000000000000000 raw: 0000000000000000 0000000000000000 00000001ffffffff 000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffffffffaed1aa00: f9 f9 f9 f9 00 00 00 00 f9 f9 f9 f9 00 00 00 00 ffffffffaed1aa80: 00 00 00 00 f9 f9 f9 f9 00 00 00 00 00 00 00 00 >ffffffffaed1ab00: 00 f9 f9 f9 f9 f9 f9 f9 00 00 00 00 00 00 f9 f9 ^ ffffffffaed1ab80: f9 f9 f9 f9 00 00 00 00 f9 f9 f9 f9 00 00 00 f9 ffffffffaed1ac00: f9 f9 f9 f9 00 06 f9 f9 f9 f9 f9 f9 00 00 02 f9 This bug is found by FuzzBT, a modified version of Syzkaller. Other contributors for this bug are Ruoyu Wu and Peng Hui. Fixes: d0b13706 ("Bluetooth: hci_sync: Rework init stages") Signed-off-by: Sungwoo Kim <iam@sung-woo.kim> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Howard Chung authored
The MGMT command: MGMT_OP_ADD_ADV_PATTERNS_MONITOR_RSSI uses variable length argument. This causes host not able to register advmon with rssi. This patch has been locally tested by adding monitor with rssi via btmgmt on a kernel 6.1 machine. Reviewed-by: Archie Pusaka <apusaka@chromium.org> Fixes: b338d917 ("Bluetooth: Implement support for Mesh") Signed-off-by: Howard Chung <howardchung@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Zheng Wang authored
In btsdio_probe, &data->work was bound with btsdio_work.In btsdio_send_frame, it was started by schedule_work. If we call btsdio_remove with an unfinished job, there may be a race condition and cause UAF bug on hdev. Fixes: ddbaf13e ("[Bluetooth] Add generic driver for Bluetooth SDIO devices") Signed-off-by: Zheng Wang <zyytlz.wz@163.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Luiz Augusto von Dentz authored
L2CAP_ECRED_CONN_REQ shall be responded with L2CAP_ECRED_CONN_RSP not L2CAP_LE_CONN_RSP: L2CAP LE EATT Server - Reject - run Listening for connections New client connection with handle 0x002a Sending L2CAP Request from client Client received response code 0x15 Unexpected L2CAP response code (expected 0x18) L2CAP LE EATT Server - Reject - test failed > ACL Data RX: Handle 42 flags 0x02 dlen 26 LE L2CAP: Enhanced Credit Connection Request (0x17) ident 1 len 18 PSM: 39 (0x0027) MTU: 64 MPS: 64 Credits: 5 Source CID: 65 Source CID: 66 Source CID: 67 Source CID: 68 Source CID: 69 < ACL Data TX: Handle 42 flags 0x00 dlen 16 LE L2CAP: LE Connection Response (0x15) ident 1 len 8 invalid size 00 00 00 00 00 00 06 00 L2CAP LE EATT Server - Reject - run Listening for connections New client connection with handle 0x002a Sending L2CAP Request from client Client received response code 0x18 L2CAP LE EATT Server - Reject - test passed Fixes: 15f02b91 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Stephan Gerhold authored
On most devices using the btqcomsmd driver (e.g. the DragonBoard 410c and other devices based on the Qualcomm MSM8916/MSM8909/... SoCs) the Bluetooth firmware seems to become unresponsive for a while after setting the BD address. On recent kernel versions (at least 5.17+) this often causes timeouts for subsequent commands, e.g. the HCI reset sent by the Bluetooth core during initialization: Bluetooth: hci0: Opcode 0x c03 failed: -110 Unfortunately this behavior does not seem to be documented anywhere. Experimentation suggests that the minimum necessary delay to avoid the problem is ~150us. However, to be sure add a sleep for > 1ms in case it is a bit longer on other firmware versions. Older kernel versions are likely also affected, although perhaps with slightly different errors or less probability. Side effects can easily hide the issue in most cases, e.g. unrelated incoming interrupts that cause the necessary delay. Fixes: 1511cc75 ("Bluetooth: Introduce Qualcomm WCNSS SMD based HCI driver") Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Kiran K authored
Older platforms and Virtual platforms which doesn't have support for bluetooth device in ACPI firmware will not have valid ACPI handle. Check for validity of handle before accessing. dmesg log from simics environment (virtual platform): BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 IP: acpi_ns_walk_namespace+0x5c/0x278 PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI Modules linked in: bnep intel_powerclamp coretemp kvm_intel kvm irqbypass intel_cstate input_leds joydev serio_raw mac_hid btusb(OE) btintel(OE) bluetooth(OE) lpc_ich compat(OE) ecdh_generic i7core_edac i5500_temp shpchp binfmt_misc sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 hid_generic usbhid hid e1000e psmouse ahci pata_acpi libahci ptp pps_core floppy CPU: 0 PID: 35 Comm: kworker/u3:0 Tainted: G OE 4.15.0-140-generic #144-Ubuntu Hardware name: Simics Simics, BIOS Simics 01/01/2011 Workqueue: hci0 hci_power_on [bluetooth] RIP: 0010:acpi_ns_walk_namespace+0x5c/0x278 RSP: 0000:ffffaa9c0049bba8 EFLAGS: 00010246 RAX: 0000000000000001 RBX: 0000000000001001 RCX: 0000000000000010 RDX: ffffffff92ea7e27 RSI: ffffffff92ea7e10 RDI: 00000000000000c8 RBP: ffffaa9c0049bbf8 R08: 0000000000000000 R09: ffffffffc05b39d0 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001 R13: 0000000000000000 R14: ffffffffc05b39d0 R15: ffffaa9c0049bc70 FS: 0000000000000000(0000) GS:ffff8be73fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000018 CR3: 0000000075f0e000 CR4: 00000000000006f0 Fixes: 294d749b ("Bluetooth: btintel: Iterate only bluetooth device ACPI entries") Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Bob Peterson authored
It turns out that reverting commit 970343cd ("GFS2: free disk inode which is deleted by remote node -V2") causes a regression related to evicting inodes that were unlinked on a different cluster node. We could also have simply added a call to d_mark_dontcache() to function gfs2_try_evict(), but the original pre-revert code is better tested and proven. This reverts commit 445cb127. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefsLinus Torvalds authored
Pull zonefs fixes from Damien Le Moal: - Silence a false positive smatch warning about an uninitialized variable - Fix an error message to provide more useful information about invalid zone append write results * tag 'zonefs-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs: zonefs: Fix error message in zonefs_file_dio_append() zonefs: Prevent uninitialized symbol 'size' warning
-
Liang He authored
In device_for_each_child_node(), we should add fwnode_handle_put() when break out of the iteration device_for_each_child_node() as it will automatically increase and decrease the refcounter. Fixes: 379d7ac7 ("phy: mdio-thunder: Add driver for Cavium Thunder SoC MDIO buses.") Signed-off-by: Liang He <windhl@126.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxJakub Kicinski authored
Saeed Mahameed says: ==================== mlx5 fixes 2023-03-21 This series provides bug fixes to mlx5 driver. * tag 'mlx5-fixes-2023-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: E-Switch, Fix an Oops in error handling code net/mlx5: Read the TC mapping of all priorities on ETS query net/mlx5e: Overcome slow response for first macsec ASO WQE net/mlx5e: Initialize link speed to zero net/mlx5: Fix steering rules cleanup net/mlx5e: Block entering switchdev mode with ns inconsistency net/mlx5e: Set uplink rep as NETNS_LOCAL ==================== Link: https://lore.kernel.org/r/20230321211135.47711-1-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-03-21 (ice) This series contains updates to ice driver only. Piotr sets first_desc field for proper handling of Flow Director packets. Michal moves error checking for VF earlier in function to properly return error before other checks/reporting; he also corrects VSI filter removal to be done during VSI removal and not rebuild. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: remove filters only if VSI is deleted ice: check if VF exists before mode check ice: fix rx buffers handling for flow director packets ==================== Link: https://lore.kernel.org/r/20230321183641.2849726-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-