- 14 Jul, 2005 7 commits
-
-
Andrew Vasquez authored
Add ISP24xx flash-manipulation routines. Add read/write flash manipulation routines for the ISP24xx. Update sysfs NVRAM objects to use generalized accessor functions. Signed-off-by:
Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
Andrew Vasquez authored
Add MBX command routines for ISP24xx support. Generalize several routines [qla2x00_load_ram_ext(), qla2x00_execute_fw(), qla2x00_verify_checksum()] to handle larger addressing space. Signed-off-by:
-
Andrew Vasquez authored
Generalize SNS generic-services routines. Consolidate completion-status checking while adding support for the ISP24xx. Signed-off-by:
-
Andrew Vasquez authored
Add ISP24xx diagnostic routines. Add function and structure definitions for the ISP24xx diagnostic firmware dump routines. Signed-off-by:
-
Andrew Vasquez authored
Add ISP24xx definitions. Add requisite structure definitions and #define's for ISP24xx support. Also drop volatile modifiers from device_reg_* register layouts as the members are never really accessed, only their offsets within the layout are used during reads and writes. Signed-off-by:
-
Andrew Vasquez authored
Add pci ids for new ISP types. Move old definitions in local qla_def.h file to pci_ids.h as well. Signed-off-by:
-
Andrew Vasquez authored
Factor-out ISP specific functions to method-based call tables. In anticipation of ISP24xx/ISP25xx support, factor-out ISP specific functions into a method-based call table. Signed-off-by:
-
- 11 Jul, 2005 6 commits
-
-
James Bottomley authored
At the moment, the transport class blindly tries to set things like QAS and IU, even if the drive won't support them. It's best not to annoy the devices like this and instead only set what the drive says is actually supported. Signed-off-by: -
Christoph Hellwig authored
now that we do normal PCI probing there's no need to keep a list of all HBAs. Rejections fixed up and Signed-off-by: -
Christoph Hellwig authored
always probe in bus order, avoid any reordering Signed-off-by: -
James Bottomley authored
Here's a tiny update that means we print the correct ASCII type information Signed-off-by: -
Andrew Morton authored
drivers/scsi/dpt_i2o.c: In function `adpt_queue': drivers/scsi/dpt_i2o.c:385: warning: unused variable `timeout' Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Andrew Morton authored
Use the macros consistently in ahd_linux_dev_reset(). If ahd_linux_dev_reset() really can be called with local interrupts disabled then yuk. Signed-off-by:
-
- 03 Jul, 2005 6 commits
-
-
James Bottomley authored
Apparently these are the only drives that try to negotiate IU and QAS at u160 speeds. The aic7xxx driver can't cope with this. The fix is to eliminate the IU and QAS setting routines. I've #if 0'd them out, just in case we ever get the sequencer documentation out of Adaptec, since we'd then be able to fix the driver. Signed-off-by: -
Linda Xie authored
Fix the problem in IBM VSCSI Client where the client doesn't send the information which is expected by the server. Signed-off-by:
Linda Xie <lxie@us.ibm.com> Signed-off-by:
-
Christoph Hellwig authored
This code pokes deep into EH internals and duplicates scsi_error.c code wrongly. It doesn't compile anymore in scsi-misc, so let's #if 0 out the code - the driver hasn't worked for more than five years anyway. Signed-off-by: -
James.Smart@Emulex.Com authored
Signed-off-by:
James Smart <James.Smart@emulex.com> Signed-off-by:
-
James.Smart@Emulex.Com authored
Update copyright notice text and include year 2005. Add Copyright notice for Christoph Hellwig to several files: lpfc.h lpfc_attr.c lpfc_els.c lpfc_hbadisc.c lpfc_init.c lpfc_mbox.c lpfc_mem.c lpfc_nportdisc.c lpfc_scsi.c lpfc_sli.c Signed-off-by:
-
James.Smart@Emulex.Com authored
Signed-off-by:
-
- 02 Jul, 2005 9 commits
-
-
James.Smart@Emulex.Com authored
Symptom - An unmapped node (initiator) that goes away in a situation such as cable pull, comes back as a mapped node. Fix - On ADISC completion, put a list on the mapped list only if it is a FCP_TARGET. Signed-off-by:
-
James.Smart@Emulex.Com authored
Add completion handler to the abort iocbs to close a hole where we could reuse an iotag. Signed-off-by:
-
James.Smart@Emulex.Com authored
lpfc_els_unsol_event() checks rjt_err to determine is LS_RJT should be sent. However, rjt_err was set to LSEXP_NOTHING_ELSE (which is 0) in cases where an LS_RJT should be sent, so rjt_err was never true. Change lpfc_els_unsol_event() to set rjt_err to 1 when LS_RJT should be sent. Signed-off-by:
-
James.Smart@Emulex.Com authored
Fix driver not seeing LP6000. Fix: add PCI id to the pci_device_id table and a short description for the HBA in get_hba_model_desc(). Also add a default clause to the switch statement that parses the various PCI ID's. Signed-off-by:
-
James.Smart@Emulex.Com authored
Add max_sectors to the driver host template and initialize it with 0xFFFF since the driver has no limitations on the size a transfer contained by a scsi command and that fits within the sg_tablesize provisioned by the driver. This fixes a performance issue seen in some configurations. Signed-off-by:
-
James.Smart@Emulex.Com authored
Bug reported via SourceForge - lpfc does not load on sparc. The lpfc driver must byteswap all FCP IOCBs to recover the data into cpu native format. Also correct issue of "iotag not found" messages Signed-off-by:
-
James.Smart@Emulex.Com authored
Analysis: Timeout of READ_SPARM64 causes call to lpfc_mbox_timeout_handler which reads psli->mbox_active to determine the timeout mbox. Timeout handler then NULL's psli->mbox_active and calls lpfc_mbx_cmpl_read_sparam(), which on timeout condition, calls link_down(). link_down() now calls disc_done() which calls mbox_timeout_hander() again since WORKER_MBOX_TMO is still set, which goes back to read psli->mbox_active which is already NULL'ed. Remove redundant if statement in lpfc_mbox_timeout_handler. pmbox is assigned psli->mbox_active so there is no need to check if it actually equals psli->mbox_active. Signed-off-by:
-
James.Smart@Emulex.Com authored
Fix issue where all hosts connected to SAN get spammed with nodev message when other initiators go away. Display nodev message only when FC targets go away. However this behavior will be overridden if LOG_DISCOVERY is set. Signed-off-by:
-
James.Smart@Emulex.Com authored
From: Christoph Hellwig <hch@lst.de>: - rename PGP/HPH to lpfc_pgp/lpfc_hgp - use __le32 types for the members to start fixing sparse -Wbitwise issues - remove lpfc_sli.MBhostaddr, we can always use the pointer from SLI2_DESC directly Signed-off-by:
-
- 01 Jul, 2005 1 commit
-
-
Moore, Eric Dean authored
Convert driver to use new change_queue_depth API. Signed-off-by:
Eric Moore <Eric.Moore@lsil.com> Fixed up rejections and Signed-off-by:
-
- 26 Jun, 2005 11 commits
-
-
James Bottomley authored
From: Andy Whitcroft <apw@shadowen.org> Updated to remove the bogus translated target check. Signed-off-by: -
Christoph Hellwig authored
Signed-off-by: -
Christoph Hellwig authored
Just opencoded access to eh_eflags, it's much more readable anyway. Signed-off-by: -
Christoph Hellwig authored
We never look at it except for the old megaraid driver that abuses it for sending internal commands. That usage can be fixed easily because those internal commands are single-threaded by a mutex and we can easily use a completion there. Signed-off-by: -
Christoph Hellwig authored
never checked anywhere Signed-off-by: -
Christoph Hellwig authored
Never used for anything but printing it out in debug routines. Signed-off-by: -
Christoph Hellwig authored
it's never set to anything, and just three broken drivers are looking at it and doing odd things. Signed-off-by: -
James Bottomley authored
From: Christoph Hellwig <hch@lst.de> Patch fixed up and Signed-off-by: -
Mark Haverkamp authored
This patch add the following products to the driver: IBM ServeRAID 8i ICP 9014R0 ICP 9024R0 ICP 9047MA ICP 9087MA ICP 9085LI ICP 5085AU Signed-off-by:Mark Haverkamp <markh@osdl.org> Signed-off-by:
-
Christoph Hellwig authored
scsi_add_host is the proper place to set the device, but people copy the scsi_set_device usage from older drivers again and again. note that this leaves some legacy drivers like qlogicisp/qlogicfc without pci association in sysfs, but they're scheduled to go away soon anyway. Signed-off-by: -
Nishanth Aravamudan authored
Use ssleep() instead of schedule_timeout to guarantee the task delays as expected. Signed-off-by:
Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by:
Domen Puncer <domen@coderock.org> Signed-off-by:
-
