Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

GFxxx/GM1xx support the selection of 64/128KiB big pages globally.

GM2xx supports the same, as well as another mode where the page size
can be selected per-instance.

We default to 128KiB pages (With per-instance for GM200, but the current
code selects 128KiB there already) as the MMU code isn't currently able
to handle otherwise.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Fixes the second DVI output on Quadro FX380.

Thanks to NVIDIA for providing the details on the full workaround.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Makes common the code that was previously used by the PMU table parsing,
as it appears other tables need this too.

Not much of an idea what this is all about...
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Some VBIOS have separate tables for each link of a given output path,
which means we have to specify the specific link we're using instead
of all possible links.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

v2: fix typo it's -> its
Signed-off-by: Roy Spliet <nouveau@spliet.org>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Corresponds with GT215. Don't rely on the lock test logic being
unconditionally enabled, and disable test logic when done (presumably
to save power).

v2: Remove warning, nvkm_msec already warns on time-out
Signed-off-by: Roy Spliet <nouveau@spliet.org>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Defer the loading of firmware files to the chip-specific part of secure
boot. This allows implementations to retry loading firmware if the first
attempt failed ; for the GM200 implementation, this happens when trying
to reset a falcon, typically in reaction to GR init.

Firmware loading may fail for a variety of reasons, such as the
filesystem where they reside not being ready at init time. This new
behavior allows GR to be initialized the next time we try to use it if
the firmware has become available.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Make it possible to call gm20x_secboot_prepare_blobs() several times
after either success or failure without re-building already existing
blobs. The function will now try to load firmware files that have
previously failed before returning success.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Handle and propagate secure boot errors. Failure to do so results in
Nouveau incorrectly believing init has succeeded and a completely
black display during boot. If we propagate the error, GR init will fail
and the user will at least have a working display.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Some members were documented in the wrong structure.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

it is a little help for hardware monitoring tools
Signed-off-by: Karol Herbst <karolherbst@gmail.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

We shouldn't set voltages below the min or above the max voltage the gpu is
able to set, so save the range for future lookups.
Signed-off-by: Karol Herbst <karolherbst@gmail.de>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Tested-by: Pierre Moreau <pierre.morrow@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

This patch adds support for advanced features supported by the
Noise-Aware PLL of Maxwell. Glitchless switch allows the PL field to be
updated without disabling the PLL first if the SYNC_MODE bit of the CFG
register is set.

More significantly, DFS allows the PLL to monitor the actual input
voltage and to dynamically lower the output frequency accordingly. This
allows the clock to be more tolerant of lower voltages.

These improvements are only supported for Tegra speedos >= 1.

Also add the voltage table that is suitable for GM20B's NAPLL. This
change needs to be done atomically for the right voltages to be used by
the clock driver.

v2. Fix build on non-Tegra platforms
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Strip the _ prefix off the gk20a clock constructor.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Split the MNP programming function into two functions for the cases
where we allow sliding or not, instead of making it take a parameter for
this. This results in less conditionals in the code and makes it easier
to read.

Also make the MNP programming functions take the PLL parameters as
arguments, and move bits of code to more relevant places (previous
programming tended to be just-in-time, which added more conditionnals in
the code).
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Use a dedicated function instead of always calculating n_lo on the fly.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Make functions manipulating PLL settings take them as an argument,
instead of assuming we want to work on the copy in the gk20a_clk
structure. This makes these functions more flexible, which we will need
in GM20B.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Add relevant functions to work with the gk20a_pll structure and use them
where they ought to be instead of directly manipulating registers.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Move variables declarations to their actual scope of use, and simplify
code a bit.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Slide setup needs to be performed only once, during init. Also
use the proper parameters for different clock speeds.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Chips may be characterized for a minimum voltage. Support this extra
parameter and select the appropriate minimum voltage for the detected
GPU speedo.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Strip the _ prefix off the gk20a volt constructor.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Give a name to this constant so we at least get an idea of what it is
for.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Nobody else is using these, so make them private.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

The GPU speedo ID is required to select the right clk/volt parameters on
GM20B.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>