- 06 Jun, 2024 21 commits
-
-
Kuniyuki Iwashima authored
Once sk->sk_state is changed to TCP_LISTEN, it never changes. unix_accept() takes advantage of this characteristics; it does not hold the listener's unix_state_lock() and only acquires recvq lock to pop one skb. It means unix_state_lock() does not prevent the queue length from changing in unix_stream_connect(). Thus, we need to use unix_recvq_full_lockless() to avoid data-race. Now we remove unix_recvq_full() as no one uses it. Note that we can remove READ_ONCE() for sk->sk_max_ack_backlog in unix_recvq_full_lockless() because of the following reasons: (1) For SOCK_DGRAM, it is a written-once field in unix_create1() (2) For SOCK_STREAM and SOCK_SEQPACKET, it is changed under the listener's unix_state_lock() in unix_listen(), and we hold the lock in unix_stream_connect() Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Kuniyuki Iwashima authored
net->unx.sysctl_max_dgram_qlen is exposed as a sysctl knob and can be changed concurrently. Let's use READ_ONCE() in unix_create1(). Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Kuniyuki Iwashima authored
sk_setsockopt() changes sk->sk_sndbuf under lock_sock(), but it's not used in af_unix.c. Let's use READ_ONCE() to read sk->sk_sndbuf in unix_writable(), unix_dgram_sendmsg(), and unix_stream_sendmsg(). Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Kuniyuki Iwashima authored
While dumping AF_UNIX sockets via UNIX_DIAG, sk->sk_state is read locklessly. Let's use READ_ONCE() there. Note that the result could be inconsistent if the socket is dumped during the state change. This is common for other SOCK_DIAG and similar interfaces. Fixes: c9da99e6 ("unix_diag: Fixup RQLEN extension report") Fixes: 2aac7a2c ("unix_diag: Pending connections IDs NLA") Fixes: 45a96b9b ("unix_diag: Dumping all sockets core") Signed-off-by:
-
Kuniyuki Iwashima authored
unix_stream_read_skb() is called from sk->sk_data_ready() context where unix_state_lock() is not held. Let's use READ_ONCE() there. Fixes: 77462de1 ("af_unix: Add read_sock for stream socket types") Signed-off-by:
-
Kuniyuki Iwashima authored
The following functions read sk->sk_state locklessly and proceed only if the state is TCP_ESTABLISHED. * unix_stream_sendmsg * unix_stream_read_generic * unix_seqpacket_sendmsg * unix_seqpacket_recvmsg Let's use READ_ONCE() there. Fixes: a05d2ad1 ("af_unix: Only allow recv on connected seqpacket sockets.") Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Kuniyuki Iwashima authored
Once sk->sk_state is changed to TCP_LISTEN, it never changes. unix_accept() takes the advantage and reads sk->sk_state without holding unix_state_lock(). Let's use READ_ONCE() there. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Kuniyuki Iwashima authored
As small optimisation, unix_stream_connect() prefetches the client's sk->sk_state without unix_state_lock() and checks if it's TCP_CLOSE. Later, sk->sk_state is checked again under unix_state_lock(). Let's use READ_ONCE() for the first check and TCP_CLOSE directly for the second check. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Kuniyuki Iwashima authored
unix_poll() and unix_dgram_poll() read sk->sk_state locklessly and calls unix_writable() which also reads sk->sk_state without holding unix_state_lock(). Let's use READ_ONCE() in unix_poll() and unix_dgram_poll() and pass it to unix_writable(). While at it, we remove TCP_SYN_SENT check in unix_dgram_poll() as that state does not exist for AF_UNIX socket since the code was added. Fixes: 1586a587 ("af_unix: do not report POLLOUT on listeners") Fixes: 3c73419c ("af_unix: fix 'poll for write'/ connected DGRAM sockets") Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Kuniyuki Iwashima authored
ioctl(SIOCINQ) calls unix_inq_len() that checks sk->sk_state first and returns -EINVAL if it's TCP_LISTEN. Then, for SOCK_STREAM sockets, unix_inq_len() returns the number of bytes in recvq. However, unix_inq_len() does not hold unix_state_lock(), and the concurrent listen() might change the state after checking sk->sk_state. If the race occurs, 0 is returned for the listener, instead of -EINVAL, because the length of skb with embryo is 0. We could hold unix_state_lock() in unix_inq_len(), but it's overkill given the result is true for pre-listen() TCP_CLOSE state. So, let's use READ_ONCE() for sk->sk_state in unix_inq_len(). Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Kuniyuki Iwashima authored
sk->sk_state is changed under unix_state_lock(), but it's read locklessly in many places. This patch adds WRITE_ONCE() on the writer side. We will add READ_ONCE() to the lockless readers in the following patches. Fixes: 83301b53 ("af_unix: Set TCP_ESTABLISHED for datagram sockets too") Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Kuniyuki Iwashima authored
When a SOCK_DGRAM socket connect()s to another socket, the both sockets' sk->sk_state are changed to TCP_ESTABLISHED so that we can register them to BPF SOCKMAP. When the socket disconnects from the peer by connect(AF_UNSPEC), the state is set back to TCP_CLOSE. Then, the peer's state is also set to TCP_CLOSE, but the update is done locklessly and unconditionally. Let's say socket A connect()ed to B, B connect()ed to C, and A disconnects from B. After the first two connect()s, all three sockets' sk->sk_state are TCP_ESTABLISHED: $ ss -xa Netid State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess u_dgr ESTAB 0 0 @A 641 * 642 u_dgr ESTAB 0 0 @B 642 * 643 u_dgr ESTAB 0 0 @C 643 * 0 And after the disconnect, B's state is TCP_CLOSE even though it's still connected to C and C's state is TCP_ESTABLISHED. $ ss -xa Netid State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess u_dgr UNCONN 0 0 @A 641 * 0 u_dgr UNCONN 0 0 @B 642 * 643 u_dgr ESTAB 0 0 @C 643 * 0 In this case, we cannot register B to SOCKMAP. So, when a socket disconnects from the peer, we should not set TCP_CLOSE to the peer if the peer is connected to yet another socket, and this must be done under unix_state_lock(). Note that we use WRITE_ONCE() for sk->sk_state as there are many lockless readers. These data-races will be fixed in the following patches. Fixes: 83301b53 ("af_unix: Set TCP_ESTABLISHED for datagram sockets too") Signed-off-by:
-
Aleksandr Mishin authored
In case of region creation fail in ipc_devlink_create_region(), previously created regions delete process starts from tainted pointer which actually holds error code value. Fix this bug by decreasing region index before delete. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 4dcd183f ("net: wwan: iosm: devlink registration") Signed-off-by:
Aleksandr Mishin <amishin@t-argos.ru> Acked-by:
Sergey Ryazanov <ryazanov.s.a@gmail.com> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240604082500.20769-1-amishin@t-argos.ruSigned-off-by:
-
Jakub Kicinski authored
Jacob Keller says: ==================== Intel Wired LAN Driver Updates 2024-05-29 (ice, igc) This series includes fixes for the ice driver as well as a fix for the igc driver. Jacob fixes two issues in the ice driver with reading the NVM for providing firmware data via devlink info. First, fix an off-by-one error when reading the Preserved Fields Area, resolving an infinite loop triggered on some NVMs which lack certain data in the NVM. Second, fix the reading of the NVM Shadow RAM on newer E830 and E825-C devices which have a variable sized CSS header rather than assuming this header is always the same fixed size as in the E810 devices. Larysa fixes three issues with the ice driver XDP logic that could occur if the number of queues is changed after enabling an XDP program. First, the af_xdp_zc_qps bitmap is removed and replaced by simpler logic to track whether queues are in zero-copy mode. Second, the reset and .ndo_bpf flows are distinguished to avoid potential races with a PF reset occuring simultaneously to .ndo_bpf callback from userspace. Third, the logic for mapping XDP queues to vectors is fixed so that XDP state is restored for XDP queues after a reconfiguration. Sasha fixes reporting of Energy Efficient Ethernet support via ethtool in the igc driver. v1: https://lore.kernel.org/r/20240530-net-2024-05-30-intel-net-fixes-v1-0-8b11c8c9bff8@intel.com ==================== Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-0-e3563aa89b0c@intel.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Sasha Neftin authored
The commit 01cf893b ("net: intel: i40e/igc: Remove setting Autoneg in EEE capabilities") removed SUPPORTED_Autoneg field but left inappropriate ethtool_keee structure initialization. When "ethtool --show <device>" (get_eee) invoke, the 'ethtool_keee' structure was accidentally overridden. Remove the 'ethtool_keee' overriding and add EEE declaration as per IEEE specification that allows reporting Energy Efficient Ethernet capabilities. Examples: Before fix: ethtool --show-eee enp174s0 EEE settings for enp174s0: EEE status: not supported After fix: EEE settings for enp174s0: EEE status: disabled Tx LPI: disabled Supported EEE link modes: 100baseT/Full 1000baseT/Full 2500baseT/Full Fixes: 01cf893b ("net: intel: i40e/igc: Remove setting Autoneg in EEE capabilities") Suggested-by:
Dima Ruinskiy <dima.ruinskiy@intel.com> Signed-off-by:
Sasha Neftin <sasha.neftin@intel.com> Tested-by:
Naama Meir <naamax.meir@linux.intel.com> Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-6-e3563aa89b0c@intel.comSigned-off-by:
-
Larysa Zaremba authored
ice_pf_dcb_recfg() re-maps queues to vectors with ice_vsi_map_rings_to_vectors(), which does not restore the previous state for XDP queues. This leads to no AF_XDP traffic after rebuild. Map XDP queues to vectors in ice_vsi_map_rings_to_vectors(). Also, move the code around, so XDP queues are mapped independently only through .ndo_bpf(). Fixes: 6624e780 ("ice: split ice_vsi_setup into smaller functions") Reviewed-by:
Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by:
Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by:
Chandan Kumar Rout <chandanx.rout@intel.com> Signed-off-by:
-
Larysa Zaremba authored
Commit 6624e780 ("ice: split ice_vsi_setup into smaller functions") has placed ice_vsi_free_q_vectors() after ice_destroy_xdp_rings() in the rebuild process. The behaviour of the XDP rings config functions is context-dependent, so the change of order has led to ice_destroy_xdp_rings() doing additional work and removing XDP prog, when it was supposed to be preserved. Also, dependency on the PF state reset flags creates an additional, fortunately less common problem: * PFR is requested e.g. by tx_timeout handler * .ndo_bpf() is asked to delete the program, calls ice_destroy_xdp_rings(), but reset flag is set, so rings are destroyed without deleting the program * ice_vsi_rebuild tries to delete non-existent XDP rings, because the program is still on the VSI * system crashes With a similar race, when requested to attach a program, ice_prepare_xdp_rings() can actually skip setting the program in the VSI and nevertheless report success. Instead of reverting to the old order of function calls, add an enum argument to both ice_prepare_xdp_rings() and ice_destroy_xdp_rings() in order to distinguish between calls from rebuild and .ndo_bpf(). Fixes: efc2214b ("ice: Add support for XDP") Reviewed-by:
Igor Bagnucki <igor.bagnucki@intel.com> Signed-off-by:
-
Larysa Zaremba authored
Referenced commit has introduced a bitmap to distinguish between ZC and copy-mode AF_XDP queues, because xsk_get_pool_from_qid() does not do this for us. The bitmap would be especially useful when restoring previous state after rebuild, if only it was not reallocated in the process. This leads to e.g. xdpsock dying after changing number of queues. Instead of preserving the bitmap during the rebuild, remove it completely and distinguish between ZC and copy-mode queues based on the presence of a device associated with the pool. Fixes: e102db78 ("ice: track AF_XDP ZC enabled queues in bitmap") Reviewed-by:
-
Jacob Keller authored
The ice driver reads data from the Shadow RAM portion of the NVM during initialization, including data used to identify the NVM image and device, such as the ETRACK ID used to populate devlink dev info fw.bundle. Currently it is using a fixed offset defined by ICE_CSS_HEADER_LENGTH to compute the appropriate offset. This worked fine for E810 and E822 devices which both have CSS header length of 330 words. Other devices, including both E825-C and E830 devices have different sizes for their CSS header. The use of a hard coded value results in the driver reading from the wrong block in the NVM when attempting to access the Shadow RAM copy. This results in the driver reporting the fw.bundle as 0x0 in both the devlink dev info and ethtool -i output. The first E830 support was introduced by commit ba20ecb1 ("ice: Hook up 4 E830 devices by adding their IDs") and the first E825-C support was introducted by commit f64e1894 ("ice: introduce new E825C devices family") The NVM actually contains the CSS header length embedded in it. Remove the hard coded value and replace it with logic to read the length from the NVM directly. This is more resilient against all existing and future hardware, vs looking up the expected values from a table. It ensures the driver will read from the appropriate place when determining the ETRACK ID value used for populating the fw.bundle_id and for reporting in ethtool -i. The CSS header length for both the active and inactive flash bank is stored in the ice_bank_info structure to avoid unnecessary duplicate work when accessing multiple words of the Shadow RAM. Both banks are read in the unlikely event that the header length is different for the NVM in the inactive bank, rather than being different only by the overall device family. Fixes: ba20ecb1 ("ice: Hook up 4 E830 devices by adding their IDs") Co-developed-by:
Paul Greenwalt <paul.greenwalt@intel.com> Signed-off-by:
Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by:
-
Jacob Keller authored
The ice_get_pfa_module_tlv() function iterates over the Type-Length-Value structures in the Preserved Fields Area (PFA) of the NVM. This is used by the driver to access data such as the Part Board Assembly identifier. The function uses simple logic to iterate over the PFA. First, the pointer to the PFA in the NVM is read. Then the total length of the PFA is read from the first word. A pointer to the first TLV is initialized, and a simple loop iterates over each TLV. The pointer is moved forward through the NVM until it exceeds the PFA area. The logic seems sound, but it is missing a key detail. The Preserved Fields Area length includes one additional final word. This is documented in the device data sheet as a dummy word which contains 0xFFFF. All NVMs have this extra word. If the driver tries to scan for a TLV that is not in the PFA, it will read past the size of the PFA. It reads and interprets the last dummy word of the PFA as a TLV with type 0xFFFF. It then reads the word following the PFA as a length. The PFA resides within the Shadow RAM portion of the NVM, which is relatively small. All of its offsets are within a 16-bit size. The PFA pointer and TLV pointer are stored by the driver as 16-bit values. In almost all cases, the word following the PFA will be such that interpreting it as a length will result in 16-bit arithmetic overflow. Once overflowed, the new next_tlv value is now below the maximum offset of the PFA. Thus, the driver will continue to iterate the data as TLVs. In the worst case, the driver hits on a sequence of reads which loop back to reading the same offsets in an endless loop. To fix this, we need to correct the loop iteration check to account for this extra word at the end of the PFA. This alone is sufficient to resolve the known cases of this issue in the field. However, it is plausible that an NVM could be misconfigured or have corrupt data which results in the same kind of overflow. Protect against this by using check_add_overflow when calculating both the maximum offset of the TLVs, and when calculating the next_tlv offset at the end of each loop iteration. This ensures that the driver will not get stuck in an infinite loop when scanning the PFA. Fixes: e961b679 ("ice: add board identifier info to devlink .info_get") Co-developed-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski authored
Daniel Borkmann says: ==================== pull-request: bpf 2024-06-05 We've added 8 non-merge commits during the last 6 day(s) which contain a total of 9 files changed, 34 insertions(+), 35 deletions(-). The main changes are: 1) Fix a potential use-after-free in bpf_link_free when the link uses dealloc_deferred to free the link object but later still tests for presence of link->ops->dealloc, from Cong Wang. 2) Fix BPF test infra to set the run context for rawtp test_run callback where syzbot reported a crash, from Jiri Olsa. 3) Fix bpf_session_cookie BTF_ID in the special_kfunc_set list to exclude it for the case of !CONFIG_FPROBE, also from Jiri Olsa. 4) Fix a Coverity static analysis report to not close() a link_fd of -1 in the multi-uprobe feature detector, from Andrii Nakryiko. 5) Revert support for redirect to any xsk socket bound to the same umem as it can result in corrupted ring state which can lead to a crash when flushing rings. A different approach will be pursued for bpf-next to address it safely, from Magnus Karlsson. 6) Fix inet_csk_accept prototype in test_sk_storage_tracing.c which caused BPF CI failure after the last tree fast forwarding, from Andrii Nakryiko. 7) Fix a coccicheck warning in BPF devmap that iterator variable cannot be NULL, from Thorsten Blum. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: Revert "xsk: Document ability to redirect to any socket bound to the same umem" Revert "xsk: Support redirect to any socket bound to the same umem" bpf: Set run context for rawtp test_run callback bpf: Fix a potential use-after-free in bpf_link_free() bpf, devmap: Remove unnecessary if check in for loop libbpf: don't close(-1) in multi-uprobe feature detector bpf: Fix bpf_session_cookie BTF_ID in special_kfunc_set list selftests/bpf: fix inet_csk_accept prototype in test_sk_storage_tracing.c ==================== Link: https://lore.kernel.org/r/20240605091525.22628-1-daniel@iogearbox.netSigned-off-by:
-
- 05 Jun, 2024 19 commits
-
-
Karol Kolacinski authored
On failed verification of PTP clock pin, error message prints channel number instead of pin index after "pin", which is incorrect. Fix error message by adding channel number to the message and printing pin number instead of channel number. Fixes: 6092315d ("ptp: introduce programmable pins.") Signed-off-by:
Karol Kolacinski <karol.kolacinski@intel.com> Acked-by:
Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/20240604120555.16643-1-karol.kolacinski@intel.comSigned-off-by:
-
Eric Dumazet authored
If one TCA_TAPRIO_ATTR_PRIOMAP attribute has been provided, taprio_parse_mqprio_opt() must validate it, or userspace can inject arbitrary data to the kernel, the second time taprio_change() is called. First call (with valid attributes) sets dev->num_tc to a non zero value. Second call (with arbitrary mqprio attributes) returns early from taprio_parse_mqprio_opt() and bad things can happen. Fixes: a3d43c0d ("taprio: Add support adding an admin schedule") Reported-by:
Noam Rathaus <noamr@ssd-disclosure.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20240604181511.769870-1-edumazet@google.comSigned-off-by:
-
Aleksandr Mishin authored
In case of flow rule creation fail in mlx5_lag_create_port_sel_table(), instead of previously created rules, the tainted pointer is deleted deveral times. Fix this bug by using correct flow rules pointers. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 352899f3 ("net/mlx5: Lag, use buckets in hash mode") Signed-off-by:
Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240604100552.25201-1-amishin@t-argos.ruSigned-off-by:
-
David S. Miller authored
Tariq Toukan says: ==================== mlx5 core fixes 20240603 This small patchset provides two bug fixes from the team to the mlx5 core driver. Series generated against: commit 33700a0c ("net/tcp: Don't consider TCP_CLOSE in TCP_AO_ESTABLISHED") ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Shay Drory authored
Currently, if teardown_hca fails to execute during driver removal, mlx5 does not stop the health timer. Afterwards, mlx5 continue with driver teardown. This may lead to a UAF bug, which results in page fault Oops[1], since the health timer invokes after resources were freed. Hence, stop the health monitor even if teardown_hca fails. [1] mlx5_core 0000:18:00.0: E-Switch: Unload vfs: mode(LEGACY), nvfs(0), necvfs(0), active vports(0) mlx5_core 0000:18:00.0: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0) mlx5_core 0000:18:00.0: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0) mlx5_core 0000:18:00.0: E-Switch: cleanup mlx5_core 0000:18:00.0: wait_func:1155:(pid 1967079): TEARDOWN_HCA(0x103) timeout. Will cause a leak of a command resource mlx5_core 0000:18:00.0: mlx5_function_close:1288:(pid 1967079): tear_down_hca failed, skip cleanup BUG: unable to handle page fault for address: ffffa26487064230 PGD 100c00067 P4D 100c00067 PUD 100e5a067 PMD 105ed7067 PTE 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 0 Comm: swapper/0 Tainted: G OE ------- --- 6.7.0-68.fc38.x86_64 #1 Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0013.121520200651 12/15/2020 RIP: 0010:ioread32be+0x34/0x60 RSP: 0018:ffffa26480003e58 EFLAGS: 00010292 RAX: ffffa26487064200 RBX: ffff9042d08161a0 RCX: ffff904c108222c0 RDX: 000000010bbf1b80 RSI: ffffffffc055ddb0 RDI: ffffa26487064230 RBP: ffff9042d08161a0 R08: 0000000000000022 R09: ffff904c108222e8 R10: 0000000000000004 R11: 0000000000000441 R12: ffffffffc055ddb0 R13: ffffa26487064200 R14: ffffa26480003f00 R15: ffff904c108222c0 FS: 0000000000000000(0000) GS:ffff904c10800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffa26487064230 CR3: 00000002c4420006 CR4: 00000000007706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? exc_page_fault+0x175/0x180 ? asm_exc_page_fault+0x26/0x30 ? __pfx_poll_health+0x10/0x10 [mlx5_core] ? __pfx_poll_health+0x10/0x10 [mlx5_core] ? ioread32be+0x34/0x60 mlx5_health_check_fatal_sensors+0x20/0x100 [mlx5_core] ? __pfx_poll_health+0x10/0x10 [mlx5_core] poll_health+0x42/0x230 [mlx5_core] ? __next_timer_interrupt+0xbc/0x110 ? __pfx_poll_health+0x10/0x10 [mlx5_core] call_timer_fn+0x21/0x130 ? __pfx_poll_health+0x10/0x10 [mlx5_core] __run_timers+0x222/0x2c0 run_timer_softirq+0x1d/0x40 __do_softirq+0xc9/0x2c8 __irq_exit_rcu+0xa6/0xc0 sysvec_apic_timer_interrupt+0x72/0x90 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x1a/0x20 RIP: 0010:cpuidle_enter_state+0xcc/0x440 ? cpuidle_enter_state+0xbd/0x440 cpuidle_enter+0x2d/0x40 do_idle+0x20d/0x270 cpu_startup_entry+0x2a/0x30 rest_init+0xd0/0xd0 arch_call_rest_init+0xe/0x30 start_kernel+0x709/0xa90 x86_64_start_reservations+0x18/0x30 x86_64_start_kernel+0x96/0xa0 secondary_startup_64_no_verify+0x18f/0x19b ---[ end trace 0000000000000000 ]--- Fixes: 9b98d395 ("net/mlx5: Start health poll at earlier stage of driver load") Signed-off-by:
Shay Drory <shayd@nvidia.com> Reviewed-by:
Moshe Shemesh <moshe@nvidia.com> Signed-off-by:
-
Moshe Shemesh authored
In case pci channel becomes offline the driver should not wait for PCI reads during health dump and recovery flow. The driver has timeout for each of these loops trying to read PCI, so it would fail anyway. However, in case of recovery waiting till timeout may cause the pci error_detected() callback fail to meet pci_dpc_recovered() wait timeout. Fixes: b3bd076f ("net/mlx5: Report devlink health on FW fatal issues") Signed-off-by:
-
Frank Wunderlich authored
The mainline MTK ethernet driver suffers long time from rarly but annoying tx queue timeouts. We think that this is caused by fixed dma sizes hardcoded for all SoCs. We suspect this problem arises from a low level of free TX DMADs, the TX Ring alomost full. The transmit timeout is caused by the Tx queue not waking up. The Tx queue stops when the free counter is less than ring->thres, and it will wake up once the free counter is greater than ring->thres. If the CPU is too late to wake up the Tx queues, it may cause a transmit timeout. Therefore, we increased the TX and RX DMADs to improve this error situation. Use the dma-size implementation from SDK in a per SoC manner. In difference to SDK we have no RSS feature yet, so all RX/TX sizes should be raised from 512 to 2048 byte except fqdma on mt7988 to avoid the tx timeout issue. Fixes: 656e7052 ("net-next: mediatek: add support for MT7623 ethernet") Suggested-by:
Daniel Golle <daniel@makrotopia.org> Signed-off-by:
Frank Wunderlich <frank-w@public-files.de> Reviewed-by:
-
Jakub Kicinski authored
Jaroslav reports Dell's OMSA Systems Management Data Engine expects NLM_DONE in a separate recvmsg(), both for rtnl_dump_ifinfo() and inet_dump_ifaddr(). We already added a similar fix previously in commit 460b0d33 ("inet: bring NLM_DONE out to a separate recv() again") Instead of modifying all the dump handlers, and making them look different than modern for_each_netdev_dump()-based dump handlers - put the workaround in rtnetlink code. This will also help us move the custom rtnl-locking from af_netlink in the future (in net-next). Note that this change is not touching rtnl_dump_all(). rtnl_dump_all() is different kettle of fish and a potential problem. We now mix families in a single recvmsg(), but NLM_DONE is not coalesced. Tested: ./cli.py --dbg-small-recv 4096 --spec netlink/specs/rt_addr.yaml \ --dump getaddr --json '{"ifa-family": 2}' ./cli.py --dbg-small-recv 4096 --spec netlink/specs/rt_route.yaml \ --dump getroute --json '{"rtm-family": 2}' ./cli.py --dbg-small-recv 4096 --spec netlink/specs/rt_link.yaml \ --dump getlink Fixes: 3e41af90 ("rtnetlink: use xarray iterator to implement rtnl_dump_ifinfo()") Fixes: cdb2f80f ("inet: use xa_array iterator to implement inet_dump_ifaddr()") Reported-by:
Jaroslav Pulchart <jaroslav.pulchart@gooddata.com> Link: https://lore.kernel.org/all/CAK8fFZ7MKoFSEzMBDAOjoUt+vTZRRQgLDNXEOfdCCXSoXXKE0g@mail.gmail.comSigned-off-by:
-
David S. Miller authored
Jason Xing says: ==================== tcp/mptcp: count CLOSE-WAIT for CurrEstab Taking CLOSE-WAIT sockets into CurrEstab counters is in accordance with RFC 1213, as suggested by Eric and Neal. v5 Link: https://lore.kernel.org/all/20240531091753.75930-1-kerneljasonxing@gmail.com/ 1. add more detailed comment (Matthieu) v4 Link: https://lore.kernel.org/all/20240530131308.59737-1-kerneljasonxing@gmail.com/ 1. correct the Fixes: tag in patch [2/2]. (Eric) Previous discussion Link: https://lore.kernel.org/all/20240529033104.33882-1-kerneljasonxing@gmail.com/ ==================== Signed-off-by:
-
Jason Xing authored
Like previous patch does in TCP, we need to adhere to RFC 1213: "tcpCurrEstab OBJECT-TYPE ... The number of TCP connections for which the current state is either ESTABLISHED or CLOSE- WAIT." So let's consider CLOSE-WAIT sockets. The logic of counting When we increment the counter? a) Only if we change the state to ESTABLISHED. When we decrement the counter? a) if the socket leaves ESTABLISHED and will never go into CLOSE-WAIT, say, on the client side, changing from ESTABLISHED to FIN-WAIT-1. b) if the socket leaves CLOSE-WAIT, say, on the server side, changing from CLOSE-WAIT to LAST-ACK. Fixes: d9cd27b8 ("mptcp: add CurrEstab MIB counter support") Signed-off-by:
Jason Xing <kernelxing@tencent.com> Reviewed-by:
Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by:
-
Jason Xing authored
According to RFC 1213, we should also take CLOSE-WAIT sockets into consideration: "tcpCurrEstab OBJECT-TYPE ... The number of TCP connections for which the current state is either ESTABLISHED or CLOSE- WAIT." After this, CurrEstab counter will display the total number of ESTABLISHED and CLOSE-WAIT sockets. The logic of counting When we increment the counter? a) if we change the state to ESTABLISHED. b) if we change the state from SYN-RECEIVED to CLOSE-WAIT. When we decrement the counter? a) if the socket leaves ESTABLISHED and will never go into CLOSE-WAIT, say, on the client side, changing from ESTABLISHED to FIN-WAIT-1. b) if the socket leaves CLOSE-WAIT, say, on the server side, changing from CLOSE-WAIT to LAST-ACK. Please note: there are two chances that old state of socket can be changed to CLOSE-WAIT in tcp_fin(). One is SYN-RECV, the other is ESTABLISHED. So we have to take care of the former case. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Hangbin Liu authored
hsr_redbox.sh test need to create bridge for testing. Add the missing config CONFIG_BRIDGE in config file. Fixes: eafbf057 ("test: hsr: Extend the hsr_redbox.sh to have more SAN devices connected") Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Tested-by:
-
Daniel Borkmann authored
Commit f58f45c1 ("vxlan: drop packets from invalid src-address") has recently been added to vxlan mainly in the context of source address snooping/learning so that when it is enabled, an entry in the FDB is not being created for an invalid address for the corresponding tunnel endpoint. Before commit f58f45c1 vxlan was similarly behaving as geneve in that it passed through whichever macs were set in the L2 header. It turns out that this change in behavior breaks setups, for example, Cilium with netkit in L3 mode for Pods as well as tunnel mode has been passing before the change in f58f45c1 for both vxlan and geneve. After mentioned change it is only passing for geneve as in case of vxlan packets are dropped due to vxlan_set_mac() returning false as source and destination macs are zero which for E/W traffic via tunnel is totally fine. Fix it by only opting into the is_valid_ether_addr() check in vxlan_set_mac() when in fact source address snooping/learning is actually enabled in vxlan. This is done by moving the check into vxlan_snoop(). With this change, the Cilium connectivity test suite passes again for both tunnel flavors. Fixes: f58f45c1 ("vxlan: drop packets from invalid src-address") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Cc: David Bauer <mail@david-bauer.net> Cc: Ido Schimmel <idosch@nvidia.com> Cc: Nikolay Aleksandrov <razor@blackwall.org> Cc: Martin KaFai Lau <martin.lau@kernel.org> Reviewed-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by:
David Bauer <mail@david-bauer.net> Signed-off-by:
-
Hangyu Hua authored
q->bands will be assigned to qopt->bands to execute subsequent code logic after kmalloc. So the old q->bands should not be used in kmalloc. Otherwise, an out-of-bounds write will occur. Fixes: c2999f7f ("net: sched: multiq: don't call qdisc_put() while holding tree lock") Signed-off-by:
Hangyu Hua <hbh25y@gmail.com> Acked-by:
Cong Wang <cong.wang@bytedance.com> Signed-off-by:
-
Taehee Yoo authored
In the XDP_TX path, ionic driver sends a packet to the TX path with rx page and corresponding dma address. After tx is done, ionic_tx_clean() frees that page. But RX ring buffer isn't reset to NULL. So, it uses a freed page, which causes kernel panic. BUG: unable to handle page fault for address: ffff8881576c110c PGD 773801067 P4D 773801067 PUD 87f086067 PMD 87efca067 PTE 800ffffea893e060 Oops: Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN NOPTI CPU: 1 PID: 25 Comm: ksoftirqd/1 Not tainted 6.9.0+ #11 Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021 RIP: 0010:bpf_prog_f0b8caeac1068a55_balancer_ingress+0x3b/0x44f Code: 00 53 41 55 41 56 41 57 b8 01 00 00 00 48 8b 5f 08 4c 8b 77 00 4c 89 f7 48 83 c7 0e 48 39 d8 RSP: 0018:ffff888104e6fa28 EFLAGS: 00010283 RAX: 0000000000000002 RBX: ffff8881576c1140 RCX: 0000000000000002 RDX: ffffffffc0051f64 RSI: ffffc90002d33048 RDI: ffff8881576c110e RBP: ffff888104e6fa88 R08: 0000000000000000 R09: ffffed1027a04a23 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8881b03a21a8 R13: ffff8881589f800f R14: ffff8881576c1100 R15: 00000001576c1100 FS: 0000000000000000(0000) GS:ffff88881ae00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff8881576c110c CR3: 0000000767a90000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <TASK> ? __die+0x20/0x70 ? page_fault_oops+0x254/0x790 ? __pfx_page_fault_oops+0x10/0x10 ? __pfx_is_prefetch.constprop.0+0x10/0x10 ? search_bpf_extables+0x165/0x260 ? fixup_exception+0x4a/0x970 ? exc_page_fault+0xcb/0xe0 ? asm_exc_page_fault+0x22/0x30 ? 0xffffffffc0051f64 ? bpf_prog_f0b8caeac1068a55_balancer_ingress+0x3b/0x44f ? do_raw_spin_unlock+0x54/0x220 ionic_rx_service+0x11ab/0x3010 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? ionic_tx_clean+0x29b/0xc60 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? __pfx_ionic_tx_clean+0x10/0x10 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? __pfx_ionic_rx_service+0x10/0x10 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? ionic_tx_cq_service+0x25d/0xa00 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? __pfx_ionic_rx_service+0x10/0x10 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ionic_cq_service+0x69/0x150 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ionic_txrx_napi+0x11a/0x540 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] __napi_poll.constprop.0+0xa0/0x440 net_rx_action+0x7e7/0xc30 ? __pfx_net_rx_action+0x10/0x10 Fixes: 8eeed837 ("ionic: Add XDP_TX support") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Reviewed-by:
Shannon Nelson <shannon.nelson@amd.com> Reviewed-by:
Brett Creeley <brett.creeley@amd.com> Signed-off-by:
-
Tristram Ha authored
KSZ8061 needs to write to a MMD register at driver initialization to fix an errata. This worked in 5.0 kernel but not in newer kernels. The issue is the main phylib code no longer resets PHY at the very beginning. Calling phy resuming code later will reset the chip if it is already powered down at the beginning. This wipes out the MMD register write. Solution is to implement a phy resume function for KSZ8061 to take care of this problem. Fixes: 232ba3a5 ("net: phy: Micrel KSZ8061: link failure after cable connect") Signed-off-by:
Tristram Ha <tristram.ha@microchip.com> Signed-off-by:
-
Wen Gu authored
When copying smc settings to clcsock, avoid setting clcsock's sk_sndbuf to sysctl_tcp_wmem[1], since this may overwrite the value set by tcp_sndbuf_expand() in TCP connection establishment. And the other setting sk_{snd|rcv}buf to sysctl value in smc_adjust_sock_bufsizes() can also be omitted since the initialization of smc sock and clcsock has set sk_{snd|rcv}buf to smc.sysctl_{w|r}mem or ipv4_sysctl_tcp_{w|r}mem[1]. Fixes: 30c3c4a4 ("net/smc: Use correct buffer sizes when switching between TCP and SMC") Link: https://lore.kernel.org/r/5eaf3858-e7fd-4db8-83e8-3d7a3e0e9ae2@linux.alibaba.comSigned-off-by:Wen Gu <guwen@linux.alibaba.com> Reviewed-by:
Wenjia Zhang <wenjia@linux.ibm.com> Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>, too. Signed-off-by:
-
Subbaraya Sundeep authored
PF mcam entries has to be at low priority always so that VF can install longest prefix match rules at higher priority. This was taken care currently but when priority allocation wrt reference entry is requested then entries are allocated from mid-zone instead of low priority zone. Fix this and always allocate entries from low priority zone for PFs. Fixes: 7df5b4b2 ("octeontx2-af: Allocate low priority entries for PF") Signed-off-by:
Subbaraya Sundeep <sbhatta@marvell.com> Reviewed-by:
-
Magnus Karlsson authored
This reverts commit 968595a9. Reported-by:
Yuval El-Hanany <YuvalE@radware.com> Signed-off-by:
Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by:
-
