- 23 Jun, 2021 35 commits
-
-
Ilan Peer authored
The following race was possible: 1. The device driver requests HW restart. 2. A scan is requested from user space and is propagated to the driver. During this flow HW_SCANNING flag is set. 3. The thread that handles the HW restart is scheduled, and before starting the actual reconfiguration it checks that HW_SCANNING is not set. The flow does so without acquiring any lock, and thus the WARN fires. Fix this by checking that HW_SCANNING is on only after RTNL is acquired, i.e., user space scan request handling is no longer in transit. Signed-off-by:
Ilan Peer <ilan.peer@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210618133832.8238ab3e19ab.I2693c581c70251472b4f9089e37e06fb2c18268f@changeidSigned-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Avraham Stern authored
In NDP ranging, the initiator need to set the BSS color in the NDP to the BSS color of the responder. Add the BSS color as a parameter for NDP ranging. Signed-off-by:
Avraham Stern <avraham.stern@intel.com> Signed-off-by:
-
Shaul Triebitz authored
Add to struct ieee80211_bss_conf a twt_broadcast field. Set it to true if both STA and AP support broadcast TWT. Signed-off-by:
Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by:
-
Krishnanand Prabhu authored
Define the bit used for timing measurement support in extended capabilities IE, used for time synchronization. Signed-off-by:
Krishnanand Prabhu <krishnanand.prabhu@intel.com> Signed-off-by:
-
Mordechay Goodstein authored
chanctx represents the current phy configuration and rate scale uses it for achieving max throughput, so if phy changes bandwidth to narrow bandwidth, RC should be _first_ updated to avoid using the wider bandwidth before updating the phy, and vice versa. We assume in the patch that station interface is always updated before updating phy context by calling ieee80211_vif_update_chandef. Signed-off-by:
Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by:
-
Johannes Berg authored
If, for some strange reason, ieee80211_wep_encrypt() fails in ieee80211_send_auth() free the SKB instead of sending out the useless frame, in addition to the warning. This can't really happen since the SKB was freshly allocated. Signed-off-by:
-
Shaul Triebitz authored
ieee80211_mgd_assoc calls ieee80211_prep_connection which might call ieee80211_prep_channel and set smps_mode to OFF. That will override the previous setting of smps_mode in ieee80211_mgd_assoc and HT SMPS will be set to "disabled" in the association request frame. Move the setting of smps_mode in ieee80211_mgd_assoc to after the call to ieee80211_prep_connection. Signed-off-by:
-
Johannes Berg authored
The code currently allows this for AP mode, but then ignores it. Clarify that since the spec doesn't allow it in AP mode. Signed-off-by:
-
Felix Fietkau authored
Sending nulldata packets is important for sw AP link probing and detecting 4-address mode links. The checks that dropped these packets were apparently added to work around an iwlwifi firmware bug with multi-TID aggregation. Fixes: 41cbb0f5 ("mac80211: add support for HE") Cc: stable@vger.kernel.org Signed-off-by:
Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20210619101517.90806-1-nbd@nbd.nameSigned-off-by:
-
Christophe JAILLET authored
Preparation work for removing the "enum rtw_ieee80211_category" in "drivers/staging/rtl8188eu/include/ieee80211.h" and "drivers/staging/rtl8723bs/include/ieee80211.h". This enum is similar to "enum ieee80211_category" from "include/linux/ieee80211.h". However it defines the value '6' as RTW_WLAN_CATEGORY_FT. So add a corresponding value in "ieee80211_category" Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/66be0187869bd7dae1c0b0785a32db695ee9872e.1624108556.git.christophe.jaillet@wanadoo.frSigned-off-by:
-
Nguyen Dinh Phi authored
The data go through mac80211_hwsim_tx_frame_no_nl() wasn't counted. Signed-off-by:
Nguyen Dinh Phi <phind.uet@gmail.com> Link: https://lore.kernel.org/r/20210622152429.881230-1-phind.uet@gmail.comSigned-off-by:
-
Weilun Du authored
This fixed the crash when setting channels to 2 or more when communicating over virtio. Signed-off-by:
Weilun Du <wdu@google.com> Link: https://lore.kernel.org/r/20210506180530.3418576-1-wdu@google.comSigned-off-by:
-
Wen Gong authored
Table 9-251—Supported VHT-MCS and NSS Set subfields, it has subfield VHT Extended NSS BW Capable, its definition is: Indicates whether the STA is capable of interpreting the Extended NSS BW Support subfield of the VHT Capabilities Information field. This patch is to add check for the subfield. Signed-off-by:
Wen Gong <wgong@codeaurora.org> Link: https://lore.kernel.org/r/20210524033624.16993-1-wgong@codeaurora.orgSigned-off-by:
-
Ryder Lee authored
offload_flags has been introduced to indicate encap status of each interface. An interface can encap offload at runtime, or if it has some extra limitations it can simply override the flags, so it's more flexible to check offload_flags in Tx path. Signed-off-by:
Ryder Lee <ryder.lee@mediatek.com> Link: https://lore.kernel.org/r/177785418cf407808bf3a44760302d0647076990.1623961575.git.ryder.lee@mediatek.comSigned-off-by:
-
Ryder Lee authored
The software rate control cannot deal with encap offload, so fix it. Signed-off-by:
-
Ryder Lee authored
Make ieee80211_tx_h_rate_ctrl() get called on dequeue to improve performance since it reduces the turnaround time for rate control. Signed-off-by:
-
Felix Fietkau authored
This avoids calling back into tx handlers from within the rate control module. Preparation for deferring rate control until tx dequeue Signed-off-by:
-
Emmanuel Grumbach authored
This will allow the low level driver to query the rfkill state. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://lore.kernel.org/r/20210616202826.9833-1-emmanuel.grumbach@intel.comSigned-off-by:
-
Johannes Berg authored
We shouldn't open-code led_trigger_blink() or led_trigger_event(), use them instead of badly open-coding them. This also fixes the locking, led_trigger_blink() and led_trigger_event() now use read_lock_irqsave(). Link: https://lore.kernel.org/r/20210616212804.b19ba1c60353.I8ea1b4defd5e12fc20ef281291e602feeec336a6@changeidSigned-off-by:
-
Johannes Berg authored
If we have been keeping per-CPU statistics, consider them regardless of USES_RSS, because we may not actually fill those, for example in non-fast-RX cases when the connection is not compatible with fast-RX. If we didn't fill them, the additional data will be zero and not affect anything, and if we did fill them then it's more correct to consider them. This fixes an issue in mesh mode where some statistics are not updated due to USES_RSS being set, but fast-RX isn't used. Reported-by:
Thiraviyam Mariyappan <tmariyap@codeaurora.org> Link: https://lore.kernel.org/r/20210610220814.13b35f5797c5.I511e9b33c5694e0d6cef4b6ae755c873d7c22124@changeidSigned-off-by:
-
Ping-Ke Shih authored
In 2G band, a HE sta can only supports HT and HE, but not supports VHT. In this case, default HE tx bitrate mask isn't filled, when we use iw to set bitrates without any parameter. Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Link: https://lore.kernel.org/r/20210609075944.51130-1-pkshih@realtek.comSigned-off-by:
-
Shaokun Zhang authored
Function 'ieee80211_sta_set_rx_nss' is declared twice, so remove the repeated declaration. Signed-off-by:
Shaokun Zhang <zhangshaokun@hisilicon.com> Link: https://lore.kernel.org/r/1622196424-62403-1-git-send-email-zhangshaokun@hisilicon.comSigned-off-by:
-
Philipp Borgers authored
Use newly introduced helper function ieee80211_is_tx_data to check if frame is a data frame. Takes into account that hardware encapsulation can be enabled for a frame and therefore no ieee80211 header is present. Signed-off-by:
Philipp Borgers <borgers@mi.fu-berlin.de> Link: https://lore.kernel.org/r/20210519122019.92359-4-borgers@mi.fu-berlin.deSigned-off-by:
-
Philipp Borgers authored
Data Frames with no ack flag set should be handled by the rate controler. Make sure we reach the rate controler by returning early from rate_control_send_low if the frame is a data frame with no ack flag. Signed-off-by:
-
Philipp Borgers authored
Add a helper function that checks if a frame is a data frame. Frames with hardware encapsulation enabled are data frames. Signed-off-by:
-
Johannes Berg authored
There's no need to do some kind of weird err and RCU dance just use sta_info_insert() directly. Link: https://lore.kernel.org/r/20210517230754.55abd10056c0.I6f5a3b7b23347b2cdaf64e6d5ce1d9e904059654@changeidSigned-off-by:
-
Johannes Berg authored
We need to differentiate these frames since the ones we currently put on the skb_queue_tdls_chsw have already been converted to ethernet format, but now that we've got a single place to enqueue to the sdata->skb_queue this isn't hard. Just differentiate based on protocol and adjust the code to queue the SKBs appropriately. Link: https://lore.kernel.org/r/20210517230754.17034990abef.I5342f2183c0d246b18d36c511eb3b6be298a6572@changeidSigned-off-by:
-
Johannes Berg authored
This is a very long loop body, move it into its own function instead, keeping only the kcov and free outside in the loop body. Link: https://lore.kernel.org/r/20210517230754.6bc6cdd68570.I28a86ebdb19601ca1965c4dc654cc49fc1064efa@changeidSigned-off-by:
-
Johannes Berg authored
We have a bunch of places that open-code the same to queue an SKB to an interface, unify that. Link: https://lore.kernel.org/r/20210517230754.113b65febd5a.Ie0e1d58a2885e75f242cb6e06f3b9660117fef93@changeidSigned-off-by:
-
Philipp Borgers authored
QoS Data Frames that were sent with a No Ack policy should be ignored by the minstrel statistics. There will never be an Ack for these frames so there is no way to draw conclusions about the success of the transmission. Signed-off-by:
-
Dan Carpenter authored
The "ap_info->tbtt_info_len" and "length" variables are the same value but it is confusing how the names are mixed up. Let's use "length" everywhere for consistency. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YJaMNzZENkYFAYQX@mwandaSigned-off-by:
-
Johannes Berg authored
We no longer need to put any limits here, hardware will and mac80211-hwsim can do whatever it likes. The reason we had this was some accounting code (still mentioned in the comment) but that code was deleted in commit c781944b ("cfg80211: Remove unused cfg80211_can_use_iftype_chan()"). Link: https://lore.kernel.org/r/20210506221159.d1d61db1d31c.Iac4da68d54b9f1fdc18a03586bbe06aeb9515425@changeidSigned-off-by:
-
Yang Li authored
Variable 'ret' is set to -ENODEV but this value is never read as it is overwritten with a new value later on, hence it is a redundant assignment and can be removed. Clean up the following clang-analyzer warning: net/mac80211/debugfs_netdev.c:60:2: warning: Value stored to 'ret' is never read [clang-analyzer-deadcode.DeadStores] Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/1619774483-116805-1-git-send-email-yang.lee@linux.alibaba.comSigned-off-by:
-
Yang Li authored
Variable 'ps' is set to wdev->ps but this value is never read as it is overwritten with a new value later on, hence it is a redundant assignment and can be removed. Cleans up the following clang-analyzer warning: net/wireless/wext-compat.c:1170:7: warning: Value stored to 'ps' during its initialization is never read [clang-analyzer-deadcode.DeadStores] Reported-by:
-
Gustavo A. R. Silva authored
Fix the following out-of-bounds warning: net/wireless/wext-spy.c:178:2: warning: 'memcpy' offset [25, 28] from the object at 'threshold' is out of the bounds of referenced subobject 'low' with type 'struct iw_quality' at offset 20 [-Warray-bounds] The problem is that the original code is trying to copy data into a couple of struct members adjacent to each other in a single call to memcpy(). This causes a legitimate compiler warning because memcpy() overruns the length of &threshold.low and &spydata->spy_thr_low. As these are just a couple of struct members, fix this by using direct assignments, instead of memcpy(). This helps with the ongoing efforts to globally enable -Warray-bounds and get us closer to being able to tighten the FORTIFY_SOURCE routines on memcpy(). Link: https://github.com/KSPP/linux/issues/109Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by:
Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210422200032.GA168995@embeddedorSigned-off-by:
-
- 22 Jun, 2021 5 commits
-
-
David S. Miller authored
Mat Martineau says: ==================== mptcp: Connection-time 'C' flag and two fixes Here are six more patches from the MPTCP tree. Most of them add support for the 'C' flag in the MPTCP connection-time option headers. This flag affects how the initial address and port are treated by each peer. Normally one peer may send MP_JOIN requests to the remote address and port that were used when initiating the MPTCP connection. The 'C' bit indicates that MP_JOINs should only be sent to remote addresses that have been advertised with ADD_ADDR. The other two patches are unrelated improvements. Patches 1-4: Add the 'C' flag feature, a sysctl to optionally enable it, and a selftest. Patch 5: Adjust rp_filter settings in a selftest. Patch 6: Improve rbuf cleanup for MPTCP sockets. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
The current cleanup rbuf tries a bit too hard to avoid acquiring the subflow socket lock. We may end-up delaying the needed ack, or skip acking a blocked subflow. Address the above extending the conditions used to trigger the cleanup to reflect more closely what TCP does and invoking tcp_cleanup_rbuf() on all the active subflows. Note that we can't replicate the exact tests implemented in tcp_cleanup_rbuf(), as MPTCP lacks some of the required info - e.g. ping-pong mode. Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
-
Yonglong Li authored
To turn rp_filter off we should: echo 0 > /proc/sys/net/ipv4/conf/default/rp_filter and echo 0 > /proc/sys/net/ipv4/conf/all/rp_filter before NIC created. Co-developed-by:
Yonglong Li <liyonglong@chinatelecom.cn> Signed-off-by:
-
Geliang Tang authored
This patch added a new argument '-d' for mptcp_join.sh script, to invoke the testcases for the MP_CAPABLE 'C' flag. Acked-by:
Geliang Tang <geliangtang@gmail.com> Signed-off-by:
-
Geliang Tang authored
This patch added a new flag named deny_join_id0 in struct mptcp_options_received. Set it when MP_CAPABLE with the flag MPTCP_CAP_DENYJOIN_ID0 is received. Also add a new flag remote_deny_join_id0 in struct mptcp_pm_data. When the flag deny_join_id0 is set, set this remote_deny_join_id0 flag. In mptcp_pm_create_subflow_or_signal_addr, if the remote_deny_join_id0 flag is set, and the remote address id is zero, stop this connection. Suggested-by:
Florian Westphal <fw@strlen.de> Acked-by:
-
