Split ivpu_ipc_send_receive() implementation to have a version
that does not call pm_runtime_resume_and_get(). That implementation
can be invoked when device is up and runtime resume is prohibited
(for example at the end of boot sequence).

The new function will be used for D0i3 entry IPC message addition
in the separate change.
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-10-stanislaw.gruszka@linux.intel.com

The firmware needs to know the time spent in D0i3/D3 to
calculate telemetry data. The D0i3/D3 residency time is
calculated by the driver and passed to the firmware
in the boot parameters.

The driver also passes VPU perf counter value captured
right before entering D0i3 - this allows the VPU firmware
to generate monotonic timestamps for the logs.
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-9-stanislaw.gruszka@linux.intel.com

The driver needs to capture the D0i3 entry timestamp to
calculate D0i3 residency time.

The D0i3 residency time and the VPU timestamp are passed
to the firmware at D0i3 exit (warm boot).
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-8-stanislaw.gruszka@linux.intel.com

Change meaning of test_mode module parameter from integer value
to bitmask allowing setting different test features with corresponding
bits.
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-7-stanislaw.gruszka@linux.intel.com

Add test_mode = 3 that add VPU_JOB_FLAGS_NULL_SUBMISSION_MASK
flag to the job send to the VPU device. Then the VPU will process
the job but won't execute commands (except the command to signal
the fence).

This can be used to estimate job processing overhead in the host
software and VPU firmware.

Unlike the null hardware mode, the null submission mode will
still work even if UMD uses VPU fences to track job completion.
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-6-stanislaw.gruszka@linux.intel.com

Setting a non-zero work point resets the IP hence IP_RESET
trigger is redundant.
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-5-stanislaw.gruszka@linux.intel.com

Add new debugfs file to set dvfs_mode FW boot parameter and restart
the FW to allow experimenting with DVFS (dynamic voltage & frequency
scaling).
Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-4-stanislaw.gruszka@linux.intel.com

Cleanup drm_driver declaration leftover.
Reviewed-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-3-stanislaw.gruszka@linux.intel.com

Bump boot API to 4.20
Bump JSM API to 3.15
Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-2-stanislaw.gruszka@linux.intel.com

The usage count of struct dev_pm_info is an implementation detail that
is only available if CONFIG_PM is enabled, so printing it in a debug message
causes a build failure in configurations without PM:

In file included from include/linux/device.h:15,
                 from include/linux/pci.h:37,
                 from drivers/accel/ivpu/ivpu_pm.c:8:
drivers/accel/ivpu/ivpu_pm.c: In function 'ivpu_rpm_get_if_active':
drivers/accel/ivpu/ivpu_pm.c:254:51: error: 'struct dev_pm_info' has no member named 'usage_count'
  254 |                  atomic_read(&vdev->drm.dev->power.usage_count));
      |                                                   ^
include/linux/dev_printk.h:129:48: note: in definition of macro 'dev_printk'
  129 |                 _dev_printk(level, dev, fmt, ##__VA_ARGS__);            \
      |                                                ^~~~~~~~~~~
drivers/accel/ivpu/ivpu_drv.h:75:17: note: in expansion of macro 'dev_dbg'
   75 |                 dev_dbg((vdev)->drm.dev, "[%s] " fmt, #type, ##args);          \
      |                 ^~~~~~~
drivers/accel/ivpu/ivpu_pm.c:253:9: note: in expansion of macro 'ivpu_dbg'
  253 |         ivpu_dbg(vdev, RPM, "rpm_get_if_active count %d\n",
      |         ^~~~~~~~

The print message does not seem essential, so the easiest workaround is
to just remove it.

Fixes: c39dc151 ("accel/ivpu: Read clock rate only if device is up")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231027152633.528490-1-arnd@kernel.org

Add panel identification entry for
- AUO B116XTN02 family (product ID:0x235c)
- BOE NT116WHM-N21,836X2 (product ID:0x09c3)
- BOE NV116WHM-N49 V8.0 (product ID:0x0979)
Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231027110435.1.Ia01fe9ec1c0953e0050a232eaa782fef2c037516@changeid

Use QAIC_TIMESYNC MHI channel to send UTC time to device in SBL
environment. Remove support for QAIC_TIMESYNC MHI channel in AMSS
environment as it is not used in that environment.
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231016170114.5446-3-quic_jhugo@quicinc.com

Device and Host have a time synchronization mechanism that happens once
during boot when device is in SBL mode. After that, in mission-mode there
is no timesync. In an experiment after continuous operation, device time
drifted w.r.t. host by approximately 3 seconds per day. This drift leads
to mismatch in timestamp of device and Host logs. To correct this
implement periodic timesync in driver. This timesync is carried out via
QAIC_TIMESYNC_PERIODIC MHI channel.
Signed-off-by: Ajit Pal Singh <quic_ajitpals@quicinc.com>
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231016170114.5446-2-quic_jhugo@quicinc.com

Several virtualization use-cases either don't support 32 MultiMSIs
(Xen/VMware) or have significant drawbacks to their use (KVM's vIOMMU,
which is required to support 32 MSI, needs to allocate an alternate
system memory space for each device using vIOMMU (e.g. 8GB VM mem and
2 cards => 8 + 2 * 8 = 24GB host memory required)). Support these
cases by enabling a 1 MSI fallback mode.

Whenever all 32 MSIs requested are not available, a second request for
a single MSI is made. Its success is the initiator of single MSI mode.
This mode causes all interrupts generated by the device to be directed
to the 0th MSI (firmware >=v1.10 will do this as a response to the PCIe
MSI capability configuration). Likewise, all interrupt handlers for the
device are registered to the 0th MSI.

Since the DBC interrupt handler checks if the DBC is in use or if
there is any pending changes, the 'spurious' interrupts are
disregarded. If there is work to be done, the standard threaded IRQ
handler is dispatched.

On every interrupt, the MHI handler wakes up its threaded interrupt
handler, and attempts to wake any waiters for MHI state events.

Performance is within +-0.6% for test cases that typify real world
use. Larger differences ([-4,+132]%, avg +47%) exist for very simple
tasks (e.g. addition) compiled for single NSPs. It is assumed that the
small work and many interrupts typically cause contention (e.g. 16 NSPs
vs 4 CPUs), as evidenced by the standard deviation between runs also
decreasing (r=-0.48 between delta(Performace_test) and
delta(StdDev_test/Avg_test))
Signed-off-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231016170036.5409-1-quic_jhugo@quicinc.com

This is already uAPI, xserver parses it. It's useful to document
since user-space might want to lookup the parent connector.

Additionally, people (me included) have misunderstood the PATH
property for being stable across reboots, but since a KMS object
ID is baked in there that's not the case. So PATH shouldn't be
used as-is in config files and such.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20231023203629.198109-1-contact@emersion.fr

This new IOCTL allows callers to close a framebuffer without
disabling planes or CRTCs. This takes inspiration from Rob Clark's
unref_fb IOCTL [1] and DRM_MODE_FB_PERSIST [2].

User-space patch for wlroots available at [3]. IGT test available
at [4].

v2: add an extra pad field just in case we want to extend this IOCTL
in the future (Pekka, Sima).

[1]: https://lore.kernel.org/dri-devel/20170509153654.23464-1-robdclark@gmail.com/
[2]: https://lore.kernel.org/dri-devel/20211006151921.312714-1-contact@emersion.fr/
[3]: https://gitlab.freedesktop.org/wlroots/wlroots/-/merge_requests/4394
[4]: https://lists.freedesktop.org/archives/igt-dev/2023-October/063294.htmlSigned-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Dennis Filder <d.filder@web.de>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231020101926.145327-2-contact@emersion.fr

drm_mode_rmfb performs two operations: drop the FB from the
file_priv->fbs list, and make sure the FB is no longer used on a
plane.

In the next commit an IOCTL which only does so former will be
introduced, so let's split it into a separate function.

No functional change, only refactoring.

v2: no change
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Dennis Filder <d.filder@web.de>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231020101926.145327-1-contact@emersion.fr

There is a typo in the kernel documentation for function
drm_atomic_helper_wait_for_dependencies. Fix it.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231027024459.12793-1-chentao@kylinos.cn

Avoid a possible uninitialized use of the crtc_state variable in function
ssd132x_primary_plane_atomic_check() and avoid the following Smatch warn:

    drivers/gpu/drm/solomon/ssd130x.c:921 ssd132x_primary_plane_atomic_check()
    error: uninitialized symbol 'crtc_state'.

Fixes: fdd591e0 ("drm/ssd130x: Add support for the SSD132x OLED controller family")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/dri-devel/7dd6ca45-8263-44fe-a318-2fd9d761425d@moroto.mountain/Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231020225338.1686974-1-javierm@redhat.com

This is a leftover from when the binding schema had the compatible string
property enum as a 'oneOf' child and the '-' was not removed when 'oneOf'
got dropped during the binding review process.
Reported-by: Rob Herring <robh@kernel.org>
Closes: https://lore.kernel.org/dri-devel/CAL_Jsq+h8DcnpKqhokQOODCc8+Qi3M0PrxRFKz_Y4v37yMJvvA@mail.gmail.com/Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231020223029.1667190-1-javierm@redhat.com

Rather than doing this in the IP code for the SDMA paging
engine, move it up to the core device level init level.
This should fix the scheduler init ordering.

v2: drop extra parens
v3: drop SDMA helpers
v4: Added a Fixes tag because amdgpu dereferences an uninitialized
    scheduler without this patch, and this patch fixes this. (Luben)
Tested-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20231025171928.3318505-1-alexander.deucher@amd.comAcked-by: Christian König <christian.koenig@amd.com>
Fixes: 56e44960 ("drm/sched: Convert the GPU scheduler to variable number of run-queues")
Signed-off-by: Luben Tuikov <ltuikov89@gmail.com>

Update the GPU Scheduler maintainer email.

Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: AMD Graphics <amd-gfx@lists.freedesktop.org>
Cc: Direct Rendering Infrastructure - Development <dri-devel@lists.freedesktop.org>
Signed-off-by: Luben Tuikov <ltuikov89@gmail.com>
Acked-by: Alex Deucher <Alexander.Deucher@amd.com>
Link: https://lore.kernel.org/r/20231026174438.18427-2-ltuikov89@gmail.com

The GPU scheduler has now a variable number of run-queues, which are set up at
drm_sched_init() time. This way, each driver announces how many run-queues it
requires (supports) per each GPU scheduler it creates. Note, that run-queues
correspond to scheduler "priorities", thus if the number of run-queues is set
to 1 at drm_sched_init(), then that scheduler supports a single run-queue,
i.e. single "priority". If a driver further sets a single entity per
run-queue, then this creates a 1-to-1 correspondence between a scheduler and
a scheduled entity.

Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Russell King <linux+etnaviv@armlinux.org.uk>
Cc: Qiang Yu <yuq825@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Emma Anholt <emma@anholt.net>
Cc: etnaviv@lists.freedesktop.org
Cc: lima@lists.freedesktop.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20231023032251.164775-1-luben.tuikov@amd.com

DRM CI keeps track of which tests are failing, flaking or being skipped
by the ci in the expectations files. Add entries for those files to the
corresponding driver maintainer, so they can be notified when they
change.
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230919182249.153499-1-helen.koike@collabora.comSigned-off-by: Maxime Ripard <mripard@kernel.org>

Clarify the procedure developer must follow to request privileges to
run tests on Freedesktop gitlab CI.

This measure was added to avoid untrusted people to misuse the
infrastructure.
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Link: https://lore.kernel.org/r/20231024004525.169002-11-helen.koike@collabora.comSigned-off-by: Maxime Ripard <mripard@kernel.org>

Since the kernel doesn't use a bot like Mesa that requires tests to pass
in order to merge the patches, leave it to developers and/or maintainers
to manually retry.
Suggested-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Link: https://lore.kernel.org/r/20231024004525.169002-10-helen.koike@collabora.comSigned-off-by: Maxime Ripard <mripard@kernel.org>

Export the resultant kernel config, making it easier to verify if the
resultant config was correctly generated.
Suggested-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Link: https://lore.kernel.org/r/20231024004525.169002-9-helen.koike@collabora.comSigned-off-by: Maxime Ripard <mripard@kernel.org>

With the new sharding, the default job timeout is not enough for i915
and their jobs are failing before completing.

See below the current execution time:

🞋 job i915:tgl 8/8 has new status: success (37m3s)
🞋 job i915:tgl 7/8 has new status: success (19m43s)
🞋 job i915:tgl 6/8 has new status: success (21m47s)
🞋 job i915:tgl 5/8 has new status: success (18m16s)
🞋 job i915:tgl 4/8 has new status: success (21m43s)
🞋 job i915:tgl 3/8 has new status: success (17m59s)
🞋 job i915:tgl 2/8 has new status: success (22m15s)
🞋 job i915:tgl 1/8 has new status: success (18m52s)
🞋 job i915:cml 2/2 has new status: success (1h19m58s)
🞋 job i915:cml 1/2 has new status: success (55m45s)
🞋 job i915:whl 2/2 has new status: success (1h8m56s)
🞋 job i915:whl 1/2 has new status: success (54m3s)
🞋 job i915:kbl 3/3 has new status: success (37m43s)
🞋 job i915:kbl 2/3 has new status: success (36m37s)
🞋 job i915:kbl 1/3 has new status: success (34m52s)
🞋 job i915:amly 2/2 has new status: success (1h7m60s)
🞋 job i915:amly 1/2 has new status: success (59m18s)
🞋 job i915:glk 2/2 has new status: success (58m26s)
🞋 job i915:glk 1/2 has new status: success (50m23s)
🞋 job i915:apl 3/3 has new status: success (1h6m39s)
🞋 job i915:apl 2/3 has new status: success (1h4m45s)
🞋 job i915:apl 1/3 has new status: success (1h7m38s)

(generated with ci_run_n_monitor.py script)

The longest job is 1h19m58s, so adjust the timeout.
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://lore.kernel.org/r/20231024004525.169002-8-helen.koike@collabora.comSigned-off-by: Maxime Ripard <mripard@kernel.org>

The Collabora Lava farm added a tag called `subset-1-gfx` to half of
devices the graphics community use.

Lets use this tag so we don't occupy all the resources.

This is particular important because Mesa3D shares the resources with
DRM-CI and use them to do pre-merge tests, so it can block developers
from getting their patches merged.
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Link: https://lore.kernel.org/r/20231024004525.169002-7-helen.koike@collabora.comSigned-off-by: Maxime Ripard <mripard@kernel.org>

Since the script that collected the list of the expectation files was
bogus and placing test to the flakes list incorrectly, restart the
expectation files with the correct script.

This reduces a lot the number of tests in the flakes list.
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Link: https://lore.kernel.org/r/20231024004525.169002-6-helen.koike@collabora.comSigned-off-by: Maxime Ripard <mripard@kernel.org>

IGT has recently merged a patch that makes code_getversion test to fails
if the driver isn't loaded or if it isn't the expected one defined in
variable IGT_FORCE_DRIVER.

Without this test, jobs were passing when the driver didn't load or
probe for some reason, giving the illusion that everything was ok.

Uprev IGT to include this modification and include core_getversion test
in all the shards.
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Link: https://lore.kernel.org/r/20231024004525.169002-5-helen.koike@collabora.comSigned-off-by: Maxime Ripard <mripard@kernel.org>

Add helper script that given a gitlab pipeline url, analyse which are
the failures and flakes and update the xfails folder accordingly.

Example:
Trigger a pipeline in gitlab infrastructure, than re-try a few jobs more
than once (so we can have data if failures are consistent across jobs
with the same name or if they are flakes) and execute:

update-xfails.py https://gitlab.freedesktop.org/helen.fornazier/linux/-/pipelines/970661

git diff should show you that it updated files in xfails folder.
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Tested-by: Vignesh Raman <vignesh.raman@collabora.com>
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Link: https://lore.kernel.org/r/20231024004525.169002-4-helen.koike@collabora.comSigned-off-by: Maxime Ripard <mripard@kernel.org>

amdgpu driver wasn't loading because amdgpu firmware wasn't being
installed in the rootfs due to the wrong DEBIAN_ARCH variable.

rename ARCH to DEBIAN_ARCH also, so we don't have the confusing
DEBIAN_ARCH, KERNEL_ARCH and ARCH.
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Link: https://lore.kernel.org/r/20231024004525.169002-3-helen.koike@collabora.comSigned-off-by: Maxime Ripard <mripard@kernel.org>

When building containers, some rust packages were installed without
locking the dependencies version, which got updated and started giving
errors like:

error: failed to compile `bindgen-cli v0.62.0`, intermediate artifacts can be found at `/tmp/cargo-installkNKRwf`
Caused by:
  package `rustix v0.38.13` cannot be built because it requires rustc 1.63 or newer, while the currently active rustc version is 1.60.0

A patch to Mesa was added fixing this error, so update it.

Also, commit in linux kernel 6.6 rc3 broke booting in crosvm.
Mesa has upreved crosvm to fix this issue.
Signed-off-by: Helen Koike <helen.koike@collabora.com>
[crosvm mesa update]
Co-Developed-by: Vignesh Raman <vignesh.raman@collabora.com>
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
[v1 container build uprev]
Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Acked-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Link: https://lore.kernel.org/r/20231024004525.169002-2-helen.koike@collabora.comSigned-off-by: Maxime Ripard <mripard@kernel.org>

Dependency for CONFIG_DRM_PANEL_EDP.  Missing this was causing the drm
driver to not probe on devices that use panel-edp.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Tested-by: Helen Koike <helen.koike@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Link: https://lore.kernel.org/r/20231002164715.157298-1-robdclark@gmail.comSigned-off-by: Maxime Ripard <mripard@kernel.org>

Enable CONFIG_MSM_MMCC_8996, the multimedia clock controller on Qualcomm
MSM8996 to prevent the the board from hitting the probe deferral
timeouts in CI run.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Helen Koike <helen.koike@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Link: https://lore.kernel.org/r/20231008132320.762542-2-dmitry.baryshkov@linaro.orgSigned-off-by: Maxime Ripard <mripard@kernel.org>

In case of the merge requests it might be useful to push repo-specific
fixes which have not yet propagated to the -external-fixes branch in the
main UPSTREAM_REPO. For example, in case of drm/msm development, we are
staging fixes locally for testing, before pushing them to the drm/drm
repo. Thus, if the CI run was triggered by merge request, also pick up
the -external fixes basing on the the CI_MERGE target repo / and branch.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Helen Koike <helen.koike@collabora.com>
Link: https://lore.kernel.org/r/20231008132320.762542-1-dmitry.baryshkov@linaro.orgSigned-off-by: Maxime Ripard <mripard@kernel.org>

Flaky tests can be very difficult to reproduce after the facts, which
will make it even harder to ever fix.

Let's document the metadata we agreed on to provide more context to
anyone trying to address these fixes.

Link: https://lore.kernel.org/dri-devel/CAPj87rPbJ1V1-R7WMTHkDat2A4nwSd61Df9mdGH2PR=ZzxaU=Q@mail.gmail.com/Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231025142441.745947-1-mripard@kernel.org

The main motivation is to repeat that dumb buffers should not be
abused for anything else than basic software rendering with KMS.
User-space devs are more likely to look at the IOCTL docs than to
actively search for the driver-oriented "Dumb Buffer Objects"
section.

v2: reference DRM_CAP_DUMB_BUFFER, DRM_CAP_DUMB_PREFERRED_DEPTH and
DRM_CAP_DUMB_PREFER_SHADOW (Pekka)
Signed-off-by: Simon Ser <contact@emersion.fr>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230821131548.269204-1-contact@emersion.fr

Add support for displaying 10-bit 4:2:0 and 4:2:2 formats produced by
the Rockchip Video Decoder on RK322X, RK3288, RK3328 and RK3399.
Also add support for 10-bit 4:4:4 format while at it.

V5: Use drm_format_info_min_pitch() for correct bpp
    Add missing NV21, NV61 and NV42 formats
V4: Rework RK3328/RK3399 win0/1 data to not affect RK3368
V2: Added NV30 support
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Sandy Huang <hjc@rock-chips.com>
Reviewed-by: Christopher Obbard <chris.obbard@collabora.com>
Tested-by: Christopher Obbard <chris.obbard@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231023173718.188102-3-jonas@kwiboo.se