- 25 Feb, 2018 40 commits
-
-
Tony Lindgren authored
[ Upstream commit d364b038 ] Looks like the interrupt property is missing the controller and level information causing: Warning (interrupts_property): interrupts size is (4), expected multiple of 12 in /ocp/elm@48078000 Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Stefan Haberland authored
[ Upstream commit da340f92 ] Prevent that a prefix flag is set based on invalid configuration data. The validity.verify_base flag should only be set for alias devices. Usually the unit address type is either one of base, PAV alias or HyperPAV alias. But in cases where the unit address type is not set or any other value the validity.verify_base flag might be set as well. This would lead to follow on errors. Explicitly check for alias devices and set the validity flag only for them. Signed-off-by:
Stefan Haberland <sth@linux.vnet.ibm.com> Reviewed-by:
Jan Hoeppner <hoeppner@linux.vnet.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Michael S. Tsirkin authored
[ Upstream commit edfb8d8f ] The original intent of the virtio header relicensing from 2008 was to make sure anyone can implement compatible devices/drivers. The virtio-ccw was omitted by mistake. We have an ack from the only contributor as well as the maintainer from IBM, so it's not too late to fix that. Make it dual-licensed with GPLv2, as the whole kernel is GPL2. Acked-by:
Christian Borntraeger <borntraeger@de.ibm.com> Acked-by:
Cornelia Huck <cohuck@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Rafael J. Wysocki authored
[ Upstream commit 31eb7431 ] Prevent rpm_get_suppliers() from returning an error code if runtime PM is disabled for one or more of the supplier devices it wants to runtime-resume, so as to make runtime PM work for devices with links to suppliers that don't use runtime PM (such links may be created during device enumeration even before it is known whether or not runtime PM will be enabled for the devices in question, for example). Fixes: 21d5c57b (PM / runtime: Use device links) Reported-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by:
Lukas Wunner <lukas@wunner.de> Tested-by:
-
Ravi Bangoria authored
[ Upstream commit 5aa04b3e ] When user tries to group imc (In-Memory Collections) event with normal event, (sometime) kernel crashes with following log: Faulting instruction address: 0x00000000 [link register ] c00000000010ce88 power_check_constraints+0x128/0x980 ... c00000000010e238 power_pmu_event_init+0x268/0x6f0 c0000000002dc60c perf_try_init_event+0xdc/0x1a0 c0000000002dce88 perf_event_alloc+0x7b8/0xac0 c0000000002e92e0 SyS_perf_event_open+0x530/0xda0 c00000000000b004 system_call+0x38/0xe0 'event_base' field of 'struct hw_perf_event' is used as flags for normal hw events and used as memory address for imc events. While grouping these two types of events, collect_events() tries to interpret imc 'event_base' as a flag, which causes a corruption resulting in a crash. Consider only those events which belongs to 'perf_hw_context' in collect_events(). Signed-off-by:
Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Reviewed-By:
Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Greg Ungerer authored
[ Upstream commit 969de098 ] Commit be7635e7 ("arch, ftrace: for KASAN put hard/soft IRQ entries into separate sections") added a new linker section, SOFTIRQENTRY_TEXT, to the linker scripts for most architectures. It didn't add it to any of the linker scripts for the m68k architecture. This was not really a problem because it is only defined if either of CONFIG_FUNCTION_GRAPH_TRACER or CONFIG_KASAN are enabled - which can never be true for m68k. However commit 229a7186 ("irq: Make the irqentry text section unconditional") means that SOFTIRQENTRY_TEXT is now always defined. So on m68k we now end up with a separate ELF section for .softirqentry.text instead of it being part of the .text section. On some m68k targets in some configurations this can also cause a fatal link error: LD vmlinux /usr/local/bin/../m68k-uclinux/bin/ld.real: section .softirqentry.text loaded at [0000000010de10c0,0000000010de12dd] overlaps section .rodata loaded at [0000000010de10c0,0000000010e0fd67] To fix add in the missing SOFTIRQENTRY_TEXT section into the m68k linker scripts. I noticed that m68k is also missing the IRQENTRY_TEXT section, so this patch also adds an entry for that too. Signed-off-by:
Greg Ungerer <gerg@linux-m68k.org> Signed-off-by:
-
Gao Feng authored
[ Upstream commit a98a4ebc ] Current codes don't use skb->mark to assign flowi4_mark, it would make the policy route rule with fwmark doesn't work as expected. Signed-off-by:
Gao Feng <gfree.wind@vip.163.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Ray Jui authored
[ Upstream commit a7f3f939 ] The current 'bnxt_shutdown' implementation only invokes 'bnxt_ulp_shutdown' to shut down RoCE in the case when the system is in the path of power off (SYSTEM_POWER_OFF). While this may work in most cases, it does not work in the smart NIC case, when Linux 'reboot' command is initiated from the Linux that runs on the ARM cores of the NIC card. In this particular case, Linux 'reboot' results in a system 'L3' level reset where the entire ARM and associated subsystems are being reset, but at the same time, Nitro core is being kept in sane state (to allow external PCIe connected servers to continue to work). Without properly shutting down RoCE and freeing all associated resources, it results in the ARM core to hang immediately after the 'reboot' By always invoking 'bnxt_ulp_shutdown' in 'bnxt_shutdown', it fixes the above issue Fixes: 0efd2fc6 ("bnxt_en: Add a callback to inform RDMA driver during PCI shutdown.") Signed-off-by:
Ray Jui <ray.jui@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Will Deacon authored
[ Upstream commit e814bccb ] My bisect scripts starting running into build failures when trying to compile 4.15-rc1 with the builds failing with things like: drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:2078: error: Cannot parse struct or union! The line in question is actually just a #define, but after some digging it turns out that my scripts pass W=1 and since commit 3a025e1d ("Add optional check for bad kernel-doc comments") that results in kernel-doc running on each source file. The file in question has a badly formatted comment immediately before the #define: /** * struct brcmf_skbuff_cb reserves first two bytes in sk_buff::cb for * bus layer usage. */ which causes the regex in dump_struct to fail (lack of braces following struct declaration) and kernel-doc returns 1, which causes the build to fail. Fix the issue by always returning 0 from kernel-doc when invoked with -none. It successfully generates no documentation, and prints out any issues. Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Jonathan Corbet <corbet@lwn.net> Signed-off-by:
-
Randy Dunlap authored
[ Upstream commit c175cb7c ] Fix build errors in kernel-doc notation. Symbols that end in '_' have a special meaning, but adding a '*' makes them OK. ../drivers/iio/industrialio-core.c:635: ERROR: Unknown target name: "iio_val". ../drivers/iio/industrialio-core.c:642: ERROR: Unknown target name: "iio_val". Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Andy Shevchenko authored
[ Upstream commit e53111ad ] The commit 0f079650 ("iio: remove gpio interrupt probing from drivers that use a single interrupt") removed custom IRQ assignment for the drivers which are enumerated via ACPI or OF. Unfortunately, some ACPI tables have IRQ line defined as GpioIo() resource and thus automatic IRQ allocation will fail. Partially revert the commit 0f079650 to restore original behaviour. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
-
Shaohua Li authored
[ Upstream commit 18022a1b ] flush_pending_writes isn't always called with block plug, so add it, and plug works in nested way. Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Russell King authored
[ Upstream commit 2012b7d6 ] Ensure that we tell the MAC to take the link down when phylink_stop() is called, and that this completes prior to phylink_stop() returns. Reported-by:
Florian Fainelli <f.fainelli@gmail.com> Tested-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Russell King authored
[ Upstream commit acf1c02f ] The options word is a be16 quantity, so we need to test the flags having converted the endian-ness. Convert the flag bits to be16, which can be optimised by the compiler, rather than converting a variable at runtime. Reported-by:
-
Xin Long authored
[ Upstream commit d30fc512 ] Now outstanding_bytes is only increased when appending chunks into one packet and sending it at 1st time, while decreased when it is about to move into retransmit queue. It means outstanding_bytes value is already decreased for all chunks in retransmit queue. However sctp_prsctp_prune_sent is a common function to check the chunks in both transmitted and retransmit queue, it decrease outstanding_bytes when moving a chunk into abandoned queue from either of them. It could cause outstanding_bytes underflow, as it also decreases it's value for the chunks in retransmit queue. This patch fixes it by only updating outstanding_bytes for transmitted queue when pruning queues for prsctp prio policy, the same fix is also needed in sctp_check_transmitted. Fixes: 8dbdf1f5 ("sctp: implement prsctp PRIO policy") Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
bingjingc authored
[ Upstream commit aff69d89 ] When disk failure occurs on new disks for reshape, mddev->degraded is not calculated correctly. Faulty bit of the failure device is not set before raid5_calc_degraded(conf). mdadm --create /dev/md0 --level=5 --raid-devices=3 /dev/loop[012] mdadm /dev/md0 -a /dev/loop3 mdadm /dev/md0 --grow -n4 mdadm /dev/md0 -f /dev/loop3 # simulating disk failure cat /sys/block/md0/md/degraded # it outputs 0, but it should be 1. However, mdadm -D /dev/md0 will show that it is degraded. It's a bug. It can be fixed by moving the resources raid5_calc_degraded() depends on before it. Reported-by:
Roy Chung <roychung@synology.com> Reviewed-by:
Alex Wu <alexwu@synology.com> Signed-off-by:
BingJing Chang <bingjingc@synology.com> Signed-off-by:
-
Dmitry Monakhov authored
[ Upstream commit a9cd1a67 ] Once infiniband is compiled as a core component its subsystem must be enabled before device initialization. Otherwise there is a NULL pointer dereference during mlx4_core init, calltrace: ->device_add if (dev->class) { deref dev->class->p =>NULLPTR #Config CONFIG_NET_DEVLINK=y CONFIG_MAY_USE_DEVLINK=y CONFIG_MLX4_EN=y Signed-off-by:
Dmitry Monakhov <dmonakhov@openvz.org> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Moni Shoua authored
[ Upstream commit 23a9cd2a ] This patch limits the initial value for PSN to 24 bits as spec requires. Signed-off-by:
Moni Shoua <monis@mellanox.com> Signed-off-by:
Mukesh Kacker <mukesh.kacker@oracle.com> Signed-off-by:
Daniel Jurgens <danielj@mellanox.com> Reviewed-by:
Parav Pandit <parav@mellanox.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
-
Mustafa Ismail authored
[ Upstream commit a283cdc4 ] The ARP table entry indexes are aliased to 12bits instead of the intended 16bits when uploaded to the QP Context. This will present an issue when the number of connections exceeds 4096 as ARP entries are reused. Fix this by adjusting the mask to account for the full 16bits. Fixes: 4e9042e6 ("i40iw: add hw and utils files") Signed-off-by:
Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by:
Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by:
-
Mustafa Ismail authored
[ Upstream commit 10499986 ] When the event type is I40IW_TIMER_TYPE_CLOSE, there is no sqbuf and it should not be freed as one in i40iw_schedule_cm_timer(). Fixes: f27b4746 ("i40iw: add connection management code") Signed-off-by:
-
Chien Tin Tung authored
[ Upstream commit 100d6de2 ] Currently there is only one sdbuf per Control QP (CQP) for programming Segment Descriptor (SD). If multiple SD work requests are posted simultaneously, the sdbuf is reused by all WQEs and new WQEs can corrupt previous WQEs sdbuf leading to incorrect SD programming. Fix this by allocating one sdbuf per CQP SQ WQE. When an SD command is posted, it will use the corresponding sdbuf for the WQE. Fixes: 86dbcd0f ("i40iw: add file to handle cqp calls") Signed-off-by:
Chien Tin Tung <chien.tin.tung@intel.com> Signed-off-by:
-
Marc Zyngier authored
[ Upstream commit 7465894e ] vgic_set_owner acquires the irq lock without disabling interrupts, resulting in a lockdep splat (an interrupt could fire and result in the same lock being taken if the same virtual irq is to be injected). In practice, it is almost impossible to trigger this bug, but better safe than sorry. Convert the lock acquisition to a spin_lock_irqsave() and keep lockdep happy. Reported-by:
James Morse <james.morse@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
-
Arnaud Patard authored
[ Upstream commit 044d71bc ] I've noticed the following message while booting a S905X based board: soc soc0: Amlogic Meson GXL (S905D) Revision 21:82 (b:2) Detected The S905D string is obviously wrong. The vendor code does: ... ver = (readl(assist_hw_rev) >> 8) & 0xff; meson_cpu_version[MESON_CPU_VERSION_LVL_MINOR] = ver; ver = (readl(assist_hw_rev) >> 16) & 0xff; meson_cpu_version[MESON_CPU_VERSION_LVL_PACK] = ver; ... while the current code does: ... ... This means that the current mainline code has package id and minor version reversed. Fixes: a9daaba2 ("soc: Add Amlogic SoC Information driver") Signed-off-by:
Arnaud Patard <apatard@hupstream.com> Acked-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
Kevin Hilman <khilman@baylibre.com> Signed-off-by:
-
Dennis Dalessandro authored
[ Upstream commit 8935780b ] It is possible the bth1 variable could be used uninitialized so going ahead and giving it a default value. Otherwise we leak stack memory to the network. Fixes: 5b6cabb0 ("IB/hfi1: Add 16B RC/UC support") Reviewed-by:
Don Hiatt <don.hiatt@intel.com> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
-
Andre Przywara authored
[ Upstream commit 7c5c2c2d ] To use pin PF4 as the RX signal of UART0, we have to write 0b011 into the respective pin controller register. Fix the wrong value we had in our table so far. Fixes: 96851d39 ("drivers: pinctrl: add driver for Allwinner A64 SoC") Signed-off-by:
Andre Przywara <andre.przywara@arm.com> Acked-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Andre Przywara authored
[ Upstream commit 6ad4cc8d ] On the A80 the pins on port B can trigger interrupts, and those are assigned to the second interrupt bank. Having two pins assigned to the same interrupt bank/pin combination does not look healthy (instead more like a copy&paste bug from pins PA14-PA16), so fix the interrupt bank for pins PB14-PB16, which is actually 1. I don't have any A80 board, so could not test this. Fixes: d5e9fb31 ("pinctrl: sunxi: Add A80 pinctrl muxing options") Signed-off-by:
-
Keerthy authored
[ Upstream commit 7f8e2a85 ] As per the re-design assign the first bank regs for unbanked irq case. This was missed out in the original patch. Signed-off-by:
Keerthy <j-keerthy@ti.com> Fixes: b5cf3fd8 ("gpio: davinci: Redesign driver to accommodate ngpios in one gpio chip") Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit a158531f ] Commit 7ebc194d ("gpio: 74x164: Introduce 'enable-gpios' property") added a new member gpiod_oe to the end of the struct gen_74x164_chip, after the zero-length buffer array. However, this buffer is a flexible array, allocated together with the structure during .probe(). As the buffer is no longer the last member, writing to it corrupts the newly added member after it. During device removal, the corrupted member will be used as a pointer, leading to a crash. This went unnoticed, as the flexible array was declared as "buffer[0]" instead of "buffer[]", and thus did not trigger a "flexible array member not at end of struct" error from gcc. Move the gpiod_oe field up to fix this, and drop the zero from the array size to prevent future similar bugs. Fixes: 7ebc194d ("gpio: 74x164: Introduce 'enable-gpios' property") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
-
Yan Markman authored
[ Upstream commit a154f8e3 ] Reserved and unused fields in the Tx descriptors should be 0. The PPv2 driver doesn't clear them at run-time (for performance reasons) but these descriptors aren't zeroed when allocated, which can lead to unpredictable behaviors. This patch fixes this by using dma_zalloc_coherent instead of dma_alloc_coherent. Fixes: 3f518509 ("ethernet: Add new driver for Marvell Armada 375 network unit") Signed-off-by:
Yan Markman <ymarkman@marvell.com> [Antoine: commit message] Signed-off-by:
Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by:
-
Sakari Ailus authored
[ Upstream commit fce8ba67 ] The ov13858 driver depends on the V4L2 fwnode, thus add that to Kconfig. Fixes: 5fcf092e ("[media] ov13858: add support for OV13858 sensor") Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
[ Upstream commit 070250a1 ] as warned: drivers/media/i2c/s5k6aa.c:429: warning: No description found for parameter 's5k6aa' drivers/media/i2c/s5k6aa.c:679: warning: No description found for parameter 's5k6aa' drivers/media/i2c/s5k6aa.c:733: warning: No description found for parameter 's5k6aa' drivers/media/i2c/s5k6aa.c:733: warning: No description found for parameter 'preset' drivers/media/i2c/s5k6aa.c:787: warning: No description found for parameter 'sd' Signed-off-by:
-
Xie XiuQi authored
[ Upstream commit 23721a75 ] We meet this compile warning, which caused by missing bpf.h in xdp.h. In file included from ./include/trace/events/xdp.h:10:0, from ./include/linux/bpf_trace.h:6, from drivers/net/ethernet/intel/i40e/i40e_txrx.c:29: ./include/trace/events/xdp.h:93:17: warning: ‘struct bpf_map’ declared inside parameter list will not be visible outside of this definition or declaration const struct bpf_map *map, u32 map_index), ^ ./include/linux/tracepoint.h:187:34: note: in definition of macro ‘__DECLARE_TRACE’ static inline void trace_##name(proto) \ ^~~~~ ./include/linux/tracepoint.h:352:24: note: in expansion of macro ‘PARAMS’ __DECLARE_TRACE(name, PARAMS(proto), PARAMS(args), \ ^~~~~~ ./include/linux/tracepoint.h:477:2: note: in expansion of macro ‘DECLARE_TRACE’ DECLARE_TRACE(name, PARAMS(proto), PARAMS(args)) ^~~~~~~~~~~~~ ./include/linux/tracepoint.h:477:22: note: in expansion of macro ‘PARAMS’ DECLARE_TRACE(name, PARAMS(proto), PARAMS(args)) ^~~~~~ ./include/trace/events/xdp.h:89:1: note: in expansion of macro ‘DEFINE_EVENT’ DEFINE_EVENT(xdp_redirect_template, xdp_redirect, ^~~~~~~~~~~~ ./include/trace/events/xdp.h:90:2: note: in expansion of macro ‘TP_PROTO’ TP_PROTO(const struct net_device *dev, ^~~~~~~~ ./include/trace/events/xdp.h:93:17: warning: ‘struct bpf_map’ declared inside parameter list will not be visible outside of this definition or declaration const struct bpf_map *map, u32 map_index), ^ ./include/linux/tracepoint.h:203:38: note: in definition of macro ‘__DECLARE_TRACE’ register_trace_##name(void (*probe)(data_proto), void *data) \ ^~~~~~~~~~ ./include/linux/tracepoint.h:354:4: note: in expansion of macro ‘PARAMS’ PARAMS(void *__data, proto), \ ^~~~~~ Reported-by:
Huang Daode <huangdaode@hisilicon.com> Cc: Hanjun Guo <guohanjun@huawei.com> Fixes: 8d3b778f ("xdp: tracepoint xdp_redirect also need a map argument") Signed-off-by:
Xie XiuQi <xiexiuqi@huawei.com> Acked-by:
Jesper Dangaard Brouer <brouer@redhat.com> Acked-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Ard Biesheuvel authored
[ Upstream commit 58d0d19a ] Since it is perfectly legal to run the kernel at EL1, it is not actually an error if HYP mode is not available when attempting to initialize KVM, given that KVM support cannot be built as a module. So demote the kvm_err() to kvm_info(), which prevents the error from appearing on an otherwise 'quiet' console. Acked-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
-
Andy Shevchenko authored
[ Upstream commit 4bd6683d ] UART2 RTS is mode 2 of the pin. Signed-off-by:
-
Thomas Richter authored
[ Upstream commit 99654849 ] Test case 21 (Number of exit events of a simple workload) fails on s390x. The reason is the invalid sample frequency supplied for this test. On s390x the minimum sample frequency is much higher (see output of /proc/service_levels). Supply a save sample frequency value for s390x to fix this. The value will be adjusted by the s390x CPUMF frequency convertion function to a value well below the sysctl kernel.perf_event_max_sample_rate value. Signed-off-by:
Thomas Richter <tmricht@linux.vnet.ibm.com> Reviewed-by:
Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> LPU-Reference: 20171123114611.93397-1-tmricht@linux.vnet.ibm.com Link: https://lkml.kernel.org/n/tip-1ynblyhi1n81idpido59nt1y@git.kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Satheesh Rajendran authored
[ Upstream commit 321a7c35 ] Certain systems are designed to have sparse/discontiguous nodes. On such systems, 'perf bench numa' hangs, shows wrong number of nodes and shows values for non-existent nodes. Handle this by only taking nodes that are exposed by kernel to userspace. Signed-off-by:
Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Reviewed-by:
Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1edbcd353c009e109e93d78f2f46381930c340fe.1511368645.git.sathnaga@linux.vnet.ibm.comSigned-off-by:
Balamuruhan S <bala24@linux.vnet.ibm.com> Signed-off-by:
-
Jiri Olsa authored
[ Upstream commit 89d0aeab ] The stdio perf top crashes when we change the terminal window size. The reason is that we assumed we get the perf_top pointer as a signal handler argument which is not the case. Changing the SIGWINCH handler logic to change global resize variable, which is checked in the main thread loop. Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Tested-by:
-
Jiri Olsa authored
[ Upstream commit 34900ec5 ] Reset header size for namespace events, otherwise it only gets bigger in ctx iterations. Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Fixes: e4222673 ("perf: Add PERF_RECORD_NAMESPACES to include namespaces related info") Link: http://lkml.kernel.org/n/tip-nlo4gonz9d4guyb8153ukzt0@git.kernel.orgSigned-off-by:
-
Thomas Richter authored
[ Upstream commit ccafc38f ] This 'perf test' case fails on s390x. The 'touch' command on s390x uses the 'openat' system call to open the file named on the command line: [root@s35lp76 perf]# perf probe -l probe:vfs_getname (on getname_flags:72@fs/namei.c with pathname) [root@s35lp76 perf]# perf trace -e open touch /tmp/abc 0.400 ( 0.015 ms): touch/27542 open(filename: /usr/lib/locale/locale-archive, flags: CLOEXEC) = 3 [root@s35lp76 perf]# There is no 'open' system call for file '/tmp/abc'. Instead the 'openat' system call is used: [root@s35lp76 perf]# strace touch /tmp/abc execve("/usr/bin/touch", ["touch", "/tmp/abc"], 0x3ffd547ec98 /* 30 vars */) = 0 [...] openat(AT_FDCWD, "/tmp/abc", O_WRONLY|O_CREAT|O_NOCTTY|O_NONBLOCK, 0666) = 3 [...] On s390x the 'egrep' command does not find a matching pattern and returns an error. Fix this for s390x create a platform dependent command line to enable the 'perf probe' call to listen to the 'openat' system call and get the expected output. Signed-off-by:
-
Ravi Bangoria authored
[ Upstream commit 05d0e62d ] There are many instructions, esp on PowerPC, whose mnemonics are longer than 6 characters. Using precision limit causes truncation of such mnemonics. Fix this by removing precision limit. Note that, 'width' is still 6, so alignment won't get affected for length <= 6. Before: li r11,-1 xscvdp vs1,vs1 add. r10,r10,r11 After: li r11,-1 xscvdpsxds vs1,vs1 add. r10,r10,r11 Reported-by:
Donald Stence <dstence@us.ibm.com> Signed-off-by:
-
