- 28 Jul, 2023 9 commits
-
-
Arseniy Krasnov authored
Fixes the following build error: drivers/mtd/nand/raw/meson_nand.c:244:59: error: initializer element is not a compile-time constant static const struct nand_ecc_step_info axg_stepinfo[] = { axg_stepinfo_1024, axg_stepinfo_512 }; ^~~~~~~~~~~~~~~~~ Fixes: 0e1db393 ("mtd: rawnand: meson: support for 512B ECC step size") Reported-by:kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202307281007.MMuVjmJ9-lkp@intel.com/Signed-off-by:
Arseniy Krasnov <AVKrasnov@sberdevices.ru> Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230728093810.2985324-1-AVKrasnov@sberdevices.ru
-
Miquel Raynal authored
The naddrs variable is initialized but not used. Fixing this could have been a matter of dropping the variable, but the right way to do it looks a bit more complex: we can avoid useless writes to the q_op structure by using it. In practice we could even have possible out-of-bound bugs with the existing implementation. Let's fix all that by just performing the right number of assignments in the addr{1,2}_reg fields. Fixes: 89550beb ("mtd: rawnand: qcom: Implement exec_op()") Reported-by:Manivannan Sadhasivam <mani@kernel.org> Reviewed-by:
Tudor Ambarus <tudor.ambarus@linaro.org> Link: https://lore.kernel.org/linux-mtd/20230716144612.32132-9-miquel.raynal@bootlin.com
-
Miquel Raynal authored
Instead of allocating a structure on the stack with random data and then expect the callee to perform the initialization (which is, in general, error prone), prefer zeroing the structure explicitly at allocation and provide the already zeroed area, so no explicit memset operation is needed. It is probably safer to do so, so we limit the timeframe when dirty data could actually be accessed by mistake. Signed-off-by:
-
Miquel Raynal authored
Fix the following checkpatch warning: CHECK: 'tranasction' may be misspelled - perhaps 'transaction'? Signed-off-by:
-
Miquel Raynal authored
The main "for" loop in qcom_read_status_exec() does guard the following to if's which are badly indented. Fix the indentation. Signed-off-by:
-
Miquel Raynal authored
Fix following checkpatch warning: "CHECK: Please don't use multiple blank lines" "CHECK: Please use a blank line after function/struct/union/enum declarations" Signed-off-by:
-
Miquel Raynal authored
Fix the following checkpatch warning: "CHECK: Alignment should match open parenthesis" Signed-off-by: -
Miquel Raynal authored
Fix the following checkpatch warning: "CHECK: Prefer kernel type 'u8' over 'uint8_t'" Signed-off-by: -
Miquel Raynal authored
Fix the following checkpatch warning: "CHECK: Prefer using the BIT macro" Signed-off-by:
-
- 27 Jul, 2023 3 commits
-
-
Rafał Miłecki authored
MTD subsystem may return -EPROBE_DEFER if something isn't ready yet. It's important to pass that error up so device will get probed later. Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Acked-by:
Florian Fainelli <florian.fainelli@broadcom.com> Acked-by:
William Zhang <william.zhang@broadcom.com> Signed-off-by:
-
Arseniy Krasnov authored
Meson NAND supports both 512B and 1024B ECC step size. Signed-off-by:
-
Arseniy Krasnov authored
ECC properties 'nand-ecc-strength' and 'nand-ecc-step-size' depends on each other, so they must be both either set or not set. In first case ECC core will try to use these values if possible (by checking ECC caps provided by driver), in second case ECC core will select most optimal values for both properties. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
- 15 Jul, 2023 7 commits
-
-
Arseniy Krasnov authored
Meson NAND supports both 512B and 1024B ECC step size, so replace 'const' for only 1024B step size with enum for both sizes. Signed-off-by:
-
Miquel Raynal authored
Binding files should be dual licensed. This file was initially written as a .txt file with no specific license, so was implicitely GPLv2. Significant part of this file and its conversion into yaml were written by Bootlin employees which agree to comply with the rules regarding the dual licensing so let's fix the SPDX tag to reflect the correct license by changing it from GPL to GPL + BSD-2-Clause. Signed-off-by:
Maxime Ripard <mripard@kernel.org> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/linux-mtd/20230712151042.433593-1-miquel.raynal@bootlin.com
-
Chris Packham authored
Add support for the AC5/AC5X SoC from Marvell. The NFC on this SoC only supports SDR modes up to 3. Marvell's SDK includes some predefined values for the ndtr registers. These haven't been incorporated as the existing code seems to get good values based on measurements taken with an oscilloscope. Signed-off-by:
Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by:
-
Chris Packham authored
Add binding for AC5 SoC. This SoC only supports NAND SDR timings up to mode 3 so a specific compatible value is needed. Signed-off-by:
Conor Dooley <conor.dooley@microchip.com> Signed-off-by:
-
Md Sadre Alam authored
Remove legacy interface implementation Co-developed-by:
Sricharan Ramabadhran <quic_srichara@quicinc.com> Signed-off-by:
Md Sadre Alam <quic_mdalam@quicinc.com> Signed-off-by:
-
Md Sadre Alam authored
Implement exec_op() so we can later get rid of the legacy interface implementation. Co-developed-by:
-
Yangtao Li authored
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by:
Yangtao Li <frank.li@vivo.com> Signed-off-by:
-
- 12 Jul, 2023 21 commits
-
-
Yangtao Li authored
mtd: nand: samsung: Convert to devm_platform_ioremap_resource() and devm_platform_get_and_ioremap_resource() Use devm_platform_ioremap_resource() and devm_platform_get_and_ioremap_resource() to simplify code. Signed-off-by:
-
Yangtao Li authored
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by:
-
Yangtao Li authored
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by:
-
Yangtao Li authored
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by:
-
Yangtao Li authored
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by:
-
Yangtao Li authored
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by:
-
Yangtao Li authored
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by:
-
Yangtao Li authored
Use devm_platform_ioremap_resource() to simplify code. Signed-off-by:
-
Yangtao Li authored
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by:
-
Yangtao Li authored
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by:
-
William Zhang authored
brcmnand controller can only access the flash spare area up to certain bytes based on the ECC level. It can be less than the actual flash spare area size. For example, for many NAND chip supporting ECC BCH-8, it has 226 bytes spare area. But controller can only uses 218 bytes. So brcmand driver overrides the mtd oobsize with the controller's accessible spare area size. When the nand base driver utilizes the nand_device object, it resets the oobsize back to the actual flash spare aprea size from nand_memory_organization structure and controller may not able to access all the oob area as mtd advises. This change fixes the issue by overriding the oobsize in the nand_memory_organization structure to the controller's accessible spare area size. Fixes: a7ab085d ("mtd: rawnand: Initialize the nand_device object") Signed-off-by:
-
William Zhang authored
When the oob buffer length is not in multiple of words, the oob write function does out-of-bounds read on the oob source buffer at the last iteration. Fix that by always checking length limit on the oob buffer read and fill with 0xff when reaching the end of the buffer to the oob registers. Fixes: 27c5b17c ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller") Signed-off-by:
-
William Zhang authored
When executing a NAND command within the panic write path, wait for any pending command instead of calling BUG_ON to avoid crashing while already crashing. Fixes: 27c5b17c ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller") Signed-off-by:
Kursad Oney <kursad.oney@broadcom.com> Reviewed-by:
Kamal Dasu <kamal.dasu@broadcom.com> Cc: stable@vger.kernel.org Signed-off-by:
-
William Zhang authored
If system is busy during the command status polling function, the driver may not get the chance to poll the status register till the end of time out and return the premature status. Do a final check after time out happens to ensure reading the correct status. Fixes: 9d2ee0a6 ("mtd: nand: brcmnand: Check flash #WP pin status before nand erase/program") Signed-off-by:
-
William Zhang authored
v7.2 controller has different ECC level field size and shift in the acc control register than its predecessor and successor controller. It needs to be set specifically. Fixes: decba6d4 ("mtd: brcmnand: Add v7.2 controller support") Signed-off-by:
-
Arseniy Krasnov authored
NAND core API already has functions to send NAND_CMD_STATUS and leave status checking mode by sending NAND_CMD_READ0, so use both of them instead of direct access to the controller registers. Signed-off-by:
-
Arseniy Krasnov authored
Export this function to work in pair with 'nand_status_op()' which is already exported. Signed-off-by:
-
Neil Armstrong authored
Due to lack of maintenance and stall of development for a few years now, and since no new features will ever be added upstream, remove the for OX810 and OX820 nand bindings. Acked-by:
Linus Walleij <linus.walleij@linaro.org> Acked-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Daniel Golle <daniel@makrotopia.org> Signed-off-by:
Neil Armstrong <neil.armstrong@linaro.org> Acked-by:
-
Neil Armstrong authored
Due to lack of maintenance and stall of development for a few years now, and since no new features will ever be added upstream, remove support for OX810 and OX820 nand. Acked-by:
-
Sridharan S N authored
Add support for: TC58NYG0S3HBAI4 - 1Gb SLC NAND flash TH58NYG2S3HBAI4 - 4Gb SLC NAND flash TH58NYG3S0HBAI6 - 8Gb SLC NAND flash All of these has 8b/512b on-die ECC capability Signed-off-by:
Sridharan S N <quic_sridsn@quicinc.com> Signed-off-by:
-
Sridharan S N authored
This adds support for ESMT F50D2G41KA. This is 2Gb SLC NAND flash with 8b/512b on-die ECC capability. Signed-off-by:
-
