* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/i915: Fix unintended recursion in ironlake_disable_rc6
  drm/i915: fix corruptions on i8xx due to relaxed fencing
  drm/i915: skip FDI & PCH enabling for DP_A
  agp/intel: Experiment with a 855GM GWB bit
  drm/i915: don't enable FDI & transcoder interrupts after all
  drm/i915: Ignore a hung GPU when flushing the framebuffer prior to a switch

Merge branch 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel into drm-fixes

* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel:
  drm/i915: Fix unintended recursion in ironlake_disable_rc6

* 'kvm-updates/2.6.38' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: SVM: Advance instruction pointer in dr_intercept

Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

After disabling, we're meant to teardown the bo used for the contexts,
not recurse into ourselves again and preventing module unload.
Reported-and-tested-by: Ben Widawsky <bwidawsk@gmail.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

The new implementation of bd_link_disk_holder() added by 49731baa
(block: restore multiple bd_link_disk_holder() support) didn't get an
extra reference for the holder_dir kobject of the slave bdev; however,
bdev kills holder_dir on removal, not release, so if the slave bdev is
removed while there are holder links, the holder_dir will be destroyed
while there still are holder links, which leads to oops later when
bd_unlink_disk_order() tries to remove those links.

Make bd_link_disk_holder() grab an extra reference for the slave's
holder_dir and put it in bd_unlink_disk_holder().
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: "Hawrylewicz Czarnowski, Przemyslaw" <przemyslaw.hawrylewicz.czarnowski@intel.com>
Tested-by: "Hawrylewicz Czarnowski, Przemyslaw" <przemyslaw.hawrylewicz.czarnowski@intel.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Grab a reference to bdev before calling blkdev_get(), which expects
the refcount to be already incremented and either returns success or
decrements the refcount and returns an error.

The bug was introduced by e525fd89 (block: make blkdev_get/put()
handle exclusive access), which didn't take into account this behavior
of blkdev_get().
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Adam Kovari and others reported that disconnecting an USB drive with
an ntfs-3g filesystem would cause "kernel BUG at fs/inode.c:1421!" to
be triggered.

The BUG could be traced back to ioctl(BLKBSZSET), which would
erroneously decrement the refcount on the bdev.  This is because
blkdev_get() expects the refcount to be already incremented and either
returns success or decrements the refcount and returns an error.

The bug was introduced by e525fd89 (block: make blkdev_get/put()
handle exclusive access), which didn't take into account this behavior
of blkdev_get().

This fixes
  https://bugzilla.kernel.org/show_bug.cgi?id=29202
(and likely 29792 too)
Reported-by: Adam Kovari <kovariadam@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  Unlock vfsmount_lock in do_umount

By the commit
	b3e19d92 2011-01-07 fs: scale mntget/mntput
vfsmount_lock was introduced around testing mnt_count.
Fix the mis-typed 'unlock'
Signed-off-by: J. R. Okajima <hooanon05@yahoo.co.jp>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Robert Swiecki reported a BUG_ON(page_mapped) from a fuzzer, punching
a hole with madvise(,, MADV_REMOVE).  That path is under mutex, and
cannot be explained by lack of serialization in unmap_mapping_range().

Reviewing the code, I found one place where vm_truncate_count handling
should have been updated, when I switched at the last minute from one
way of managing the restart_addr to another: mremap move changes the
virtual addresses, so it ought to adjust the restart_addr.

But rather than exporting the notion of restart_addr from memory.c, or
converting to restart_pgoff throughout, simply reset vm_truncate_count
to 0 to force a rescan if mremap move races with preempted truncation.

We have no confirmation that this fixes Robert's BUG,
but it is a fix that's worth making anyway.
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Michael Leun reported that running parallel opens on a fuse filesystem
can trigger a "kernel BUG at mm/truncate.c:475"

Gurudas Pai reported the same bug on NFS.

The reason is, unmap_mapping_range() is not prepared for more than
one concurrent invocation per inode.  For example:

  thread1: going through a big range, stops in the middle of a vma and
     stores the restart address in vm_truncate_count.

  thread2: comes in with a small (e.g. single page) unmap request on
     the same vma, somewhere before restart_address, finds that the
     vma was already unmapped up to the restart address and happily
     returns without doing anything.

Another scenario would be two big unmap requests, both having to
restart the unmapping and each one setting vm_truncate_count to its
own value.  This could go on forever without any of them being able to
finish.

Truncate and hole punching already serialize with i_mutex.  Other
callers of unmap_mapping_range() do not, and it's difficult to get
i_mutex protection for all callers.  In particular ->d_revalidate(),
which calls invalidate_inode_pages2_range() in fuse, may be called
with or without i_mutex.

This patch adds a new mutex to 'struct address_space' to prevent
running multiple concurrent unmap_mapping_range() on the same mapping.

[ We'll hopefully get rid of all this with the upcoming mm
  preemptibility series by Peter Zijlstra, the "mm: Remove i_mmap_mutex
  lockbreak" patch in particular.  But that is for 2.6.39 ]
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Reported-by: Michael Leun <lkml20101129@newton.leun.net>
Reported-by: Gurudas Pai <gurudas.pai@oracle.com>
Tested-by: Gurudas Pai <gurudas.pai@oracle.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This reverts commit 556ea928.

Jeff Chua reports that it can cause some bluetooth devices (he mentions
an Bluetooth Intermec scanner) to just stop responding after a while
with messages like

  [ 4533.361959] btusb 8-1:1.0: no reset_resume for driver btusb?
  [ 4533.361964] btusb 8-1:1.1: no reset_resume for driver btusb?

from the kernel. See also

  https://bugzilla.kernel.org/show_bug.cgi?id=26182

for other reports.
Reported-by: Jeff Chua <jeff.chua.linux@gmail.com>
Reported-by: Andrew Meakovski <meako@bigmir.net>
Reported-by: Jim Faulkner <jfaulkne@ccs.neu.edu>
Acked-by: Greg KH <gregkh@suse.de>
Acked-by: Matthew Garrett <mjg@redhat.com>
Acked-by: Gustavo F. Padovan <padovan@profusion.mobi>
Cc: stable@kernel.org (for 2.6.37)
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel into drm-fixes

* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel:
  drm/i915: fix corruptions on i8xx due to relaxed fencing
  drm/i915: skip FDI & PCH enabling for DP_A
  agp/intel: Experiment with a 855GM GWB bit
  drm/i915: don't enable FDI & transcoder interrupts after all
  drm/i915: Ignore a hung GPU when flushing the framebuffer prior to a switch

It looks like gen2 has a peculiar interleaved 2-row inter-tile
layout. Probably inherited from i81x which had 2kb tiles (which
naturally fit an even-number-of-tile-rows scheme to fit onto 4kb
pages). There is no other mention of this in any docs (also not
in the Intel internal documention according to Chris Wilson).

Problem manifests itself in corruptions in the second half of the
last tile row (if the bo has an odd number of tiles). Which can
only happen with relaxed tiling (introduced in a00b10c3).

So reject set_tiling calls that don't satisfy this constrain to
prevent broken userspace from causing havoc. While at it, also
check the size for newer chipsets.

LKML: https://lkml.org/lkml/2011/2/19/5Reported-by: Indan Zupancic <indan@nul.nu>
Tested-by: Indan Zupancic <indan@nul.nu>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (33 commits)
  Added support for usb ethernet (0x0fe6, 0x9700)
  r8169: fix RTL8168DP power off issue.
  r8169: correct settings of rtl8102e.
  r8169: fix incorrect args to oob notify.
  DM9000B: Fix PHY power for network down/up
  DM9000B: Fix reg_save after spin_lock in dm9000_timeout
  net_sched: long word align struct qdisc_skb_cb data
  sfc: lower stack usage in efx_ethtool_self_test
  bridge: Use IPv6 link-local address for multicast listener queries
  bridge: Fix MLD queries' ethernet source address
  bridge: Allow mcast snooping for transient link local addresses too
  ipv6: Add IPv6 multicast address flag defines
  bridge: Add missing ntohs()s for MLDv2 report parsing
  bridge: Fix IPv6 multicast snooping by correcting offset in MLDv2 report
  bridge: Fix IPv6 multicast snooping by storing correct protocol type
  p54pci: update receive dma buffers before and after processing
  fix cfg80211_wext_siwfreq lock ordering...
  rt2x00: Fix WPA TKIP Michael MIC failures.
  ath5k: Fix fast channel switching
  tcp: undo_retrans counter fixes
  ...

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  amd64-agp: fix crash at second module load
  drm/radeon: fix regression with AA resolve checking
  drm: drop commented out code and preceding comment
  drm/vblank: Enable precise vblank timestamps for interlaced and doublescan modes.
  drm/vblank: Use memory barriers optimized for atomic_t instead of generics.
  drm/vblank: Use abs64(diff_ns) for s64 diff_ns instead of abs(diff_ns)
  drm/radeon/kms: align height of fb allocation.
  Revert "drm/radeon/kms: switch back to min->max pll post divider iteration"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: serio/gameport - use 'long' system workqueue
  Input: synaptics - document 0x0c query
  Input: tegra-kbc - add function keymap

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: check if device support discard in xfs_ioc_trim()
  xfs: prevent leaking uninitialized stack memory in FSGEOMETRY_V1

The device is very similar to (0x0fe6, 0x8101),
And works well with dm9601 driver.
Signed-off-by: Shahar Havivi <shaharh@redhat.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>

- fix the RTL8111DP turn off the power when DASH is enabled.
- RTL_GIGA_MAC_VER_27 must wait for tx finish before reset.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>

Adjust and remove certain settings of RTL8102E which are for previous chips.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Acked-off-by: Francois Romieu <romieu@fr.zoreil.com>

It results in the wrong point address and influences RTL8168DP.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>

DM9000 revision B needs 1 ms delay after PHY power-on.
PHY must be powered on by writing 0 into register DM9000_GPR before
all other settings will change (see Davicom spec and example code).

Remember, that register DM9000_GPR was not changed by reset sequence.

Without this fix the FIFO is out of sync and sends wrong data after
sequence of "ifconfig ethX down ; ifconfig ethX up".
Signed-off-by: David S. Miller <davem@davemloft.net>

The spin_lock should hold before reading register.
Signed-off-by: David S. Miller <davem@davemloft.net>

netem_skb_cb() does :

return (struct netem_skb_cb *)qdisc_skb_cb(skb)->data;

Unfortunatly struct qdisc_skb_cb data is not long word aligned, so
access to psched_time_t time_to_send uses a non aligned access.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 8ee294cd converted serio
subsystem event handling from using a dedicated thread to using
common workqueue. Unfortunately, this regressed our boot times,
due to the fact that serio jobs take long time to execute. While
the new concurrency managed workqueue code manages long-playing
works just fine and schedules additional workers as needed, such
works wreck havoc among remaining users of flush_scheduled_work().

To solve this problem let's move serio/gameport works from system_wq
to system_long_wq which nobody tries to flush.
Reported-and-tested-by: Hernando Torque <pantherchen@versanet.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Since Synaptics technical writers department is a bit slow releasing updated
Synaptics interface guide, let's add some new bits (with their blessing)
to the code so that they don't get lost.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

The __param section is already brought in by RODATA above.
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The module forgot to sometimes unregister some resources.

This fixes Bug #22882.

[Patch updated to 2.6.38-rc3 by Randy Dunlap.]
Tested-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Florian Mickler <florian@mickler.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

* 'for-2639-rc4/i2c-fixes' of git://git.fluff.org/bjdooks/linux:
  i2c-omap: fixup commit cb527ede whitespace
  i2c-omap: Double clear of ARDY status in IRQ handler
  i2c-omap: fix build for !CONFIG_SUSPEND
  i2c-omap: fix static suspend vs. runtime suspend
  i2c-stu300: make sure adapter-name is terminated

* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  Revert "USB: Reset USB 3.0 devices on (re)discovery"
  USB: musb: omap2430: fix kernel panic on reboot
  sierra: add new ID for Airprime/Sierra USB IP modem
  USB: serial/usb_wwan, fix tty NULL dereference
  USB: Reset USB 3.0 devices on (re)discovery
  USB: Add quirk for Samsung Android phone modem
  USB: Add Samsung SGH-I500/Android modem ID switch to visor driver
  USB: add quirks entry for Keytouch QWERTY Panel
  usb: musb: omap2430: fix kernel panic on reboot
  usb: musb: fix build breakage

Fixup the whitespace error noticed in cb527edeSigned-off-by: Ben Dooks <ben-linux@fluff.org>

This errata occurs when the ARDY interrupt generation is enabled.
At the begining of every new transaction the ARDY interrupt is cleared.

On continuous i2c transactions where after clearing the ARDY bit from
I2C_STAT register (clearing the interrupt), the IRQ line is reasserted and the
I2C_STAT[ARDY] bit set again on 1. In fact, the ARDY status bit is not cleared
at the write access to I2C_STAT[ARDY] and only the IRQ line is deasserted and
then reasserted. This is not captured in the usual errata documents.

The workaround is to have a double clear of ARDY status in irq handler.
Signed-off-by: Richard woodruff <r-woodruff2@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

fix the build break when !CONFIG_SUSPEND

drivers/i2c/busses/i2c-omap.c:1173: error: lvalue required as unary '&' operand
make[3]: *** [drivers/i2c/busses/i2c-omap.o] Error 1
make[2]: *** [drivers/i2c/busses] Error 2
make[1]: *** [drivers/i2c] Error 2
make: *** [drivers] Error 2
Signed-off-by: Balaji T K <balajitk@ti.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Some userspaces can emit a whole packet without disabling AA resolve
by the looks of it, so we have to deal with them.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Tested-by: Jorg Otte <jrg.otte@googlemail.com>

r100_gpu_init() was dropped in 90aca4d2 ("drm/radeon/kms: simplify &
improve GPU reset V2") but here it was only commented out.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Testing showed the current code can already handle doublescan
video modes just fine. A trivial tweak makes it work for interlaced
scanout as well.

Tested and shown to be precise on Radeon rv530, r600 and
Intel 945-GME.
Signed-off-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Documentation/atomic_ops.txt tells us that there are memory
barriers optimized for atomic_inc and other atomic_t ops.

Use these instead of smp_wmb(), and also to make the required
memory barriers around vblank counter increments more explicit.
Signed-off-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>