- 04 May, 2022 12 commits
-
-
Bhupesh Sharma authored
Since Qualcomm device-trees already use SoC specific compatibles for describing the 'sdhci-msm' nodes, it makes sense to add the support for the same in the driver as well. Keep the old deprecated compatible strings still in the driver, to ensure backward compatibility with older device-trees. Signed-off-by:
Bhupesh Sharma <bhupesh.sharma@linaro.org> Link: https://lore.kernel.org/r/20220429220833.873672-3-bhupesh.sharma@linaro.orgSigned-off-by:
Ulf Hansson <ulf.hansson@linaro.org>
-
Bhupesh Sharma authored
Convert Qualcomm sdhci-msm devicetree binding to YAML. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Rob Herring <robh@kernel.org> Signed-off-by:
-
Krzysztof Kozlowski authored
Cleanup indentation and order of entries in example DTS. The most important when reading the DTS are compatible and reg. By convention they are usually to first entries. No functional change. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220428081817.35382-2-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Krzysztof Kozlowski authored
The binding should not allow infinite number of 'reg' entries, so add strict limit. Signed-off-by:
-
Al Cooper authored
Enabling this feature will allow the controller to stop the bus clock when the bus is idle. The feature is not part of the standard and is unique to newer Arasan cores and is enabled with a bit in a vendor specific register. This feature will only be enabled for non-removable devices because they don't switch the voltage and clock gating breaks SD Card volatge switching. Signed-off-by:
Al Cooper <alcooperx@gmail.com> Signed-off-by:
Kamal Dasu <kdasu.kdev@gmail.com> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20220427180853.35970-3-kdasu.kdev@gmail.comSigned-off-by:
-
Al Cooper authored
Re-organize the flags by basing the bit names on the flag that they apply to. Also change the "flags" member in the "brcmstb_match_priv" struct to const. Signed-off-by:
-
Linus Walleij authored
The custom boardfile ios handler isn't used anywhere in the kernel. Delete it. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220427125557.1608825-1-linus.walleij@linaro.orgSigned-off-by:
-
Wan Jiabing authored
Use if(!host->dma.chan) instead of if(chan) and if(!chan) to make code better. Signed-off-by:
Wan Jiabing <wanjiabing@vivo.com> Link: https://lore.kernel.org/r/20220427120310.838843-1-wanjiabing@vivo.comSigned-off-by:
-
Minghao Chi authored
Use kobj_to_dev() instead of open-coding it. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Minghao Chi <chi.minghao@zte.com.cn> Link: https://lore.kernel.org/r/20220425105339.3515368-1-chi.minghao@zte.com.cnSigned-off-by:
-
Ulf Hansson authored
-
Samuel Holland authored
Newer variants of the MMC controller support a 34-bit physical address space by using word addresses instead of byte addresses. However, the code truncates the DMA descriptor address to 32 bits before applying the shift. This breaks DMA for descriptors allocated above the 32-bit limit. Fixes: 3536b82e ("mmc: sunxi: add support for A100 mmc controller") Signed-off-by:
Samuel Holland <samuel@sholland.org> Reviewed-by:
Andre Przywara <andre.przywara@arm.com> Reviewed-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220424231751.32053-1-samuel@sholland.orgSigned-off-by:
-
Sebastian Reichel authored
Add compatible value for the Rockchip rk3588 dwcmshc controller. Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by:
-
- 26 Apr, 2022 28 commits
-
-
Linus Walleij authored
To make the entropy pool a bit better we can toss in the CID for eMMC and SD cards into it, usually the serial number portion is at least unique. This does not count as improvement of the entropy but in practice it makes it a bit more random to mix in these numbers. Cc: Theodore Ts'o <tytso@mit.edu> Acked-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
-
Bean Huo authored
Occasionally, user-land applications initiate longer timeout values for certain commands through ioctl() system call. But so far we are still using a fixed timeout of 10 seconds in mmc_poll_for_busy() on the ioctl() path, even if a custom timeout is specified in the userspace application. This patch allows custom timeout values to override this default timeout values on the ioctl path. Cc: stable <stable@vger.kernel.org> Signed-off-by:
Bean Huo <beanhuo@micron.com> Acked-by:
Avri Altman <avri.altman@wdc.com> Reviewed-by:
-
Bean Huo authored
Only the device data is needed, not the entire struct of_device_id. Use of_device_get_match_data() instead of open coding of_match_device(). Signed-off-by:
-
Vignesh Raghavendra authored
The ARASAN MMC controller on Keystone 3 class of devices need the SDCD line to be connected for proper functioning. Similar to the issue pointed out in sdhci-of-arasan.c driver, commit 3794c542 ("mmc: sdhci-of-arasan: Set controller to test mode when no CD bit"). In cases where this can't be connected, add a quirk to force the controller into test mode and set the TESTCD bit. Use the flag "ti,fails-without-test-cd", to implement this above quirk when required. Signed-off-by:
Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by:
Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20220425063120.10135-3-a-govindraju@ti.comSigned-off-by:
-
Aswath Govindraju authored
The ARASAN MMC controller on Keystone 3 class of devices needs the SDCD line to be connected for proper functioning. Similar to the issue pointed out in sdhci-of-arasan.c driver, commit 3794c542 ("mmc: sdhci-of-arasan: Set controller to test mode when no CD bit"). In cases where SDCD line is not connected, adding "ti,fails-without-test-cd" in the DT node helps to indicate the controller, that the SDCD line has been pulled down, using the TESTCD bit. Signed-off-by:
-
Ulf Hansson authored
-
Abel Vesa authored
Add i.MX8DXL compatible string. It also needs "fsl,imx8qm-fec" compatible. Signed-off-by:
Abel Vesa <abel.vesa@nxp.com> Acked-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220419113516.1827863-10-abel.vesa@nxp.comSigned-off-by:
-
Chris Packham authored
Convert the sdhci-dove binding to JSON schema. The optional clocks property was not in the original binding document but has been in the dove.dtsi since commit 5b03df9a ("ARM: dove: switch to DT clock providers"). Signed-off-by:
Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220419024611.1327525-5-chris.packham@alliedtelesis.co.nzSigned-off-by:
-
Chris Packham authored
Convert the orion-sdio binding to JSON schema. Signed-off-by:
-
Linus Walleij authored
The VQMMC is often provided by a level shifter, so drop a small note in the bindings that this can be the case and how that is done. It is helpful information since this is pretty common. Cc: devicetree@vger.kernel.org Signed-off-by:
-
Linus Walleij authored
We iterate an extra time through the IRQ status handling loop despite nothing had fired. Enabling the debug prints: mmci-pl18x 80005000.mmc: op 01 arg 00000000 flags 000000e1 mmci-pl18x 80005000.mmc: irq0 (data+cmd) 00000001 mmci-pl18x 80005000.mmc: irq0 (data+cmd) 00000000 mmci-pl18x 80005000.mmc: op 01 arg 40ff8080 flags 000000e1 mmci-pl18x 80005000.mmc: irq0 (data+cmd) 00000001 mmci-pl18x 80005000.mmc: irq0 (data+cmd) 00000000 It is pointless to loop through the function when status is zero. Just break the loop if the status is zero. Signed-off-by:
-
Heiner Kallweit authored
Using the device-managed version allows to simplify clean-up in probe() error path and remove(). Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/268b3cd5-2388-2553-bdba-c72853f91aa3@gmail.comSigned-off-by:
-
Ben Chuang authored
When GL9755 enters ASPM L1 sub-states, it will stay at L1.1 and will not enter L1.2. The workaround is to toggle PM state to allow GL9755 to enter ASPM L1.2. Signed-off-by:
Ben Chuang <ben.chuang@genesyslogic.com.tw> Acked-by:
-
Wolfram Sang authored
We have a dedicated directory for platform_data meanwhile, don't spoil the MMC directory with it. Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220412093102.3428-1-wsa+renesas@sang-engineering.comSigned-off-by:
-
Aidan MacDonald authored
Do what is done in other DMA-enabled MMC host drivers (cf. host/mmci.c) and limit the maximum segment size based on the DMA engine's capabilities. This is needed to avoid warnings like the following with CONFIG_DMA_API_DEBUG=y. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 21 at kernel/dma/debug.c:1162 debug_dma_map_sg+0x2f4/0x39c DMA-API: jz4780-dma 13420000.dma-controller: mapping sg segment longer than device claims to support [len=98304] [max=65536] CPU: 0 PID: 21 Comm: kworker/0:1H Not tainted 5.18.0-rc1 #19 Workqueue: kblockd blk_mq_run_work_fn Stack : 81575aec 00000004 80620000 80620000 80620000 805e7358 00000009 801537ac 814c832c 806276e3 806e34b4 80620000 81575aec 00000001 81575ab8 09291444 00000000 00000000 805e7358 81575958 ffffffea 8157596c 00000000 636f6c62 6220646b 80387a70 0000000f 6d5f6b6c 80620000 00000000 81575ba4 00000009 805e170c 80896640 00000001 00010000 00000000 00000000 00006098 806e0000 ... Call Trace: [<80107670>] show_stack+0x84/0x120 [<80528cd8>] __warn+0xb8/0xec [<80528d78>] warn_slowpath_fmt+0x6c/0xb8 [<8016f1d4>] debug_dma_map_sg+0x2f4/0x39c [<80169d4c>] __dma_map_sg_attrs+0xf0/0x118 [<8016a27c>] dma_map_sg_attrs+0x14/0x28 [<804f66b4>] jz4740_mmc_prepare_dma_data+0x74/0xa4 [<804f6714>] jz4740_mmc_pre_request+0x30/0x54 [<804f4ff4>] mmc_blk_mq_issue_rq+0x6e0/0x7bc [<804f5590>] mmc_mq_queue_rq+0x220/0x2d4 [<8038b2c0>] blk_mq_dispatch_rq_list+0x480/0x664 [<80391040>] blk_mq_do_dispatch_sched+0x2dc/0x370 [<80391468>] __blk_mq_sched_dispatch_requests+0xec/0x164 [<80391540>] blk_mq_sched_dispatch_requests+0x44/0x94 [<80387900>] __blk_mq_run_hw_queue+0xb0/0xcc [<80134c14>] process_one_work+0x1b8/0x264 [<80134ff8>] worker_thread+0x2ec/0x3b8 [<8013b13c>] kthread+0x104/0x10c [<80101dcc>] ret_from_kernel_thread+0x14/0x1c ---[ end trace 0000000000000000 ]--- Signed-off-by:Aidan MacDonald <aidanmacdonald.0x0@gmail.com> Link: https://lore.kernel.org/r/20220411153753.50443-1-aidanmacdonald.0x0@gmail.comSigned-off-by:
-
Adam Ford authored
The SDHC controller in the imx8mn and imx8mp have the same controller as the imx8mm which is slightly different than that of the imx7d. Using the fallback of the imx8mm enables the controllers to support HS400-ES which is not available on the imx7d. After discussion with NXP, it turns out that the imx8qm should fall back to the imx8qxp, because those have some additional flags not present in the imx8mm. Mark the current state of the fallbacks as deprecated, and add the proper fallbacks so in the future, the deprecated combination can be removed and prevent any future devices from using the wrong fallback. Suggested-by: haibo.chen@nxp.com Signed-off-by:
Adam Ford <aford173@gmail.com> Reviewed-by:
-
Wolfram Sang authored
To make it unambiguous that the hw_reset callback is for cards and not for controllers, we add 'card' to the callback name and convert all users in one go. We keep the argument as mmc_host, though, because the callback is used very early when mmc_card is not yet populated. Signed-off-by:
-
Wolfram Sang authored
To make it unambiguous that mmc_sw_reset() is for cards and not for controllers, we make the function argument mmc_card instead of mmc_host. There are no users to convert currently. Suggested-by:
-
Lad Prabhakar authored
Add linux-renesas-soc@vger.kernel.org list entry for Renesas TMIO/SDHI driver. Signed-off-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by:
-
Wolfram Sang authored
We don't need to specify the Gen3 compatible entry for M3W because it will be provided by the generic Gen3 fallback. Signed-off-by:
-
Wolfram Sang authored
The hardware evolved, so we only need to disable HS400 support on ES1.* revisions. Update the code. Signed-off-by:
Takeshi Saito <takeshi.saito.xv@renesas.com> [wsa: refactored to top-of-tree] Signed-off-by:
-
Janusz Krzysztofik authored
The driver, OMAP specific, now omits clk_prepare/unprepare() steps, not supported by OMAP custom implementation of clock API. However, non-CCF stubs of those functions exist for use on such platforms until converted to CCF. Update the driver to be compatible with CCF implementation of clock API. Signed-off-by:
Janusz Krzysztofik <jmkrzyszt@gmail.com> Link: https://lore.kernel.org/r/20220402112004.129886-1-jmkrzyszt@gmail.comSigned-off-by:
-
Christian Löhle authored
Since SD and MMC Highspeed modes are also valid for SPI let's parse them too. Signed-off-by:
Christian Loehle <cloehle@hyperstone.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20c6efa9a4c7423bbfb9352705c4a53a@hyperstone.comSigned-off-by:
-
Sergey Shtylyov authored
Despite mmc_ioc_multi_cmd::num_of_cmds is a 64-bit field, its maximum value is limited to MMC_IOC_MAX_CMDS (only 255); using a 64-bit local variable to hold a copy of that field leads to gcc generating ineffective loop code: despite the source code using an *int* variable for the loop counters, the 32-bit object code uses 64-bit unsigned counters. Also, gcc has to drop the most significant word of that 64-bit variable when calling kcalloc() and assigning to mmc_queue_req::ioc_count anyway. Using the *unsigned int* variable instead results in a better code. Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Signed-off-by:
Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/eea3b0bd-6091-f005-7189-b5b7868abdb6@omp.ruSigned-off-by:
-
Tinghan Shen authored
MediaTek has a new version of mmc IP since mt8183. Some IO registers are moved to top to improve hardware design and named as "host top registers". Add host top register in the reg binding description for mt8183 and successors. Signed-off-by:
Wenbin Mei <wenbin.mei@mediatek.com> Signed-off-by:
Tinghan Shen <tinghan.shen@mediatek.com> Reviewed-by:
-
Chris Packham authored
Convert the marvell,xenon-sdhci binding to JSON schema. Currently the in-tree dts files don't validate because they use sdhci@ instead of mmc@ as required by the generic mmc-controller schema. The compatible "marvell,sdhci-xenon" was not documented in the old binding but it accompanies the of "marvell,armada-3700-sdhci" in the armada-37xx SoC dtsi so this combination is added to the new binding document. Signed-off-by:
-
Wolfram Sang authored
Further digging in the datasheets revealed that R-Car V3M also has no HS400 support. Reported-by:
-
Geert Uytterhoeven authored
When running on an system without any quirks (e.g. R-Car V3U), the kernel crashes with a NULL pointer dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000002 ... Hardware name: Renesas Falcon CPU and Breakout boards based on r8a779a0 (DT) Workqueue: events_freezable mmc_rescan ... Call trace: renesas_sdhi_internal_dmac_start_dma+0x54/0x12c tmio_process_mrq+0x124/0x274 Fix this by adding the missing checks for the validatity of the priv->quirks pointer. Signed-off-by:
-
