- 07 Jul, 2020 28 commits
-
-
Takashi Iwai authored
The commit 3ad796cb ("ALSA: pcm: Use SG-buffer only when direct DMA is available") introduced a check of the DMA type and this caused a build error on m68k (and possibly some others) due to the lack of dma_is_direct() definition. Since the check is needed only for CONFIG_SND_DMA_SGBUF enablement (i.e. solely x86), use #ifdef instead of IS_ENABLED() for avoiding such a build error. Fixes: 3ad796cb ("ALSA: pcm: Use SG-buffer only when direct DMA is available") Reported-by:
kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20200707111225.26826-1-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
Harsha Priya authored
External HDMI receivers have analog circuitry that needs to be powered-on when exiting standby, and a mechanism to detect PCM v. IEC61937 data. These two steps take time and up to 2-3 seconds of audio may be muted when starting playback. Intel hardware (Haswell and beyond) can keep the link active with a 'silent stream', so that the receiver does not go through those two steps when valid audio is transmitted. This mechanism relies on an setting the channel_id as 0xf, sending info packet and preventing the codec from going to D3, which will increase the platform static power consumption. The info packet assumes a basic 2ch stereo, and the silent stream is enabled when connecting a monitor. In case of format changes the detection of PCM v. IEC61937 needs to be re-run. In this case there is no way to avoid the 2-3s mute. The silent stream is enabled with a Kconfig option, as well as a kernel parameter should there be a need to override the build time default. This approach is used based on the power_save capability as an example, but in the future, it may be used with a kcontrol, depending on UCM support for HDaudio legacy. Signed-off-by:
Harsha Priya <harshapriya.n@intel.com> Signed-off-by:
Emmanuel Jillela <emmanuel.jillela@intel.com> Reviewed-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Reported-by:
-
Pierre-Louis Bossart authored
Fix W=1 warnings. Mark all unused tables with __maybe_unused. Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200702193604.169059-24-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Pierre-Louis Bossart authored
Fix W=1 warning. sound/drivers/vx/vx_core.c: In function ‘snd_vx_threaded_irq_handler’: sound/drivers/vx/vx_core.c:515:3: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] 515 | ; /* so far, nothing to do yet */ | ^ Signed-off-by: -
Pierre-Louis Bossart authored
Fix W=1 warnings - add missing context parameter in description Signed-off-by:
-
Pierre-Louis Bossart authored
Fix W=1 warnings. Mark variables as __always_unused. sound/pci/via82xx.c: In function ‘snd_via82xx_codec_wait’: sound/pci/via82xx.c:547:6: warning: variable ‘err’ set but not used [-Wunused-but-set-variable] 547 | int err; | ^~~ sound/pci/via82xx_modem.c: In function ‘snd_via82xx_codec_wait’: sound/pci/via82xx_modem.c:401:6: warning: variable ‘err’ set but not used [-Wunused-but-set-variable] 401 | int err; | ^~~ Signed-off-by: -
Pierre-Louis Bossart authored
Fix W=1 warnings, add missing field descriptions. Signed-off-by:
-
Pierre-Louis Bossart authored
Fix W=1 warning. Mark the 'audiostatus' variable as __always_unused. sound/pci/es1938.c: In function ‘snd_es1938_interrupt’: sound/pci/es1938.c:1622:24: warning: variable ‘audiostatus’ set but not used [-Wunused-but-set-variable] 1622 | unsigned char status, audiostatus; | ^~~~~~~~~~~ Signed-off-by: -
Pierre-Louis Bossart authored
Fix W=1 warning. Mark the 'req' variable as __always_unused. sound/xen/xen_snd_front.c: In function ‘xen_snd_front_stream_close’: sound/xen/xen_snd_front.c:117:21: warning: variable ‘req’ set but not used [-Wunused-but-set-variable] 117 | struct xensnd_req *req; | ^~~ Signed-off-by: -
Pierre-Louis Bossart authored
Fix W=1 warnings: sound/pci/oxygen/xonar_wm87x6.c: In function ‘wm8776_write’: sound/pci/oxygen/xonar_wm87x6.c:119:11: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits] 119 | if (reg >= WM8776_HPLVOL && reg <= WM8776_DACMASTER) | ^~ sound/pci/oxygen/xonar_wm87x6.c: In function ‘wm8766_write’: sound/pci/oxygen/xonar_wm87x6.c:147:12: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits] 147 | if ((reg >= WM8766_LDA1 && reg <= WM8766_RDA1) || | ^~ Signed-off-by: -
Pierre-Louis Bossart authored
Fix W=1 warning: sound/pci/rme9652/hdspm.c: In function ‘hdspm_autosync_ref’: sound/pci/rme9652/hdspm.c:3030:16: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits] 3030 | if ((syncref >= HDSPM_AES32_AUTOSYNC_FROM_WORD) && | ^~ Signed-off-by: -
Pierre-Louis Bossart authored
Fix W=1 warnings. Two variables are only used for debug logs, mark with __maybe_unused: sound/pci/korg1212/korg1212.c: In function ‘snd_korg1212_create’: sound/pci/korg1212/korg1212.c:2152:36: warning: variable ‘iomem2_size’ set but not used [-Wunused-but-set-variable] 2152 | unsigned ioport_size, iomem_size, iomem2_size; | ^~~~~~~~~~~ sound/pci/korg1212/korg1212.c:2152:11: warning: variable ‘ioport_size’ set but not used [-Wunused-but-set-variable] 2152 | unsigned ioport_size, iomem_size, iomem2_size; | ^~~~~~~~~~~ Signed-off-by: -
Pierre-Louis Bossart authored
Fix W=1 warning. The loopsize variable is only used in compiled-out code, so mark with __maybe_unused. sound/pci/emu10k1/emu10k1_patch.c: In function ‘snd_emu10k1_sample_new’: sound/pci/emu10k1/emu10k1_patch.c:30:22: warning: variable ‘loopsize’ set but not used [-Wunused-but-set-variable] 30 | int truesize, size, loopsize, blocksize; | ^~~~~~~~ Signed-off-by: -
Pierre-Louis Bossart authored
Fix W=1 warning. Remove excess function parameter from description Fixes: 7bc93821 ("ALSA: firewire-lib: split allocation of isochronous resources from establishment of connection") Acked-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by:
-
Pierre-Louis Bossart authored
Fix W=1 warnings. Mark variables used for reads as __always_unused. sound/pci/emu10k1/emu10k1_main.c: In function ‘snd_emu10k1_cardbus_init’: sound/pci/emu10k1/emu10k1_main.c:626:15: warning: variable ‘value’ set but not used [-Wunused-but-set-variable] 626 | unsigned int value; | ^~~~~ sound/pci/emu10k1/emu10k1_main.c: In function ‘snd_emu1010_load_firmware_entry’: sound/pci/emu10k1/emu10k1_main.c:656:15: warning: variable ‘write_post’ set but not used [-Wunused-but-set-variable] 656 | unsigned int write_post; | ^~~~~~~~~~ Signed-off-by: -
Pierre-Louis Bossart authored
Fix W=1 warnings. The files contain formatting that isn't kernel-doc. Signed-off-by:
-
Pierre-Louis Bossart authored
Fix W=1 warnings. Add missing arguments and description. Signed-off-by:
-
Pierre-Louis Bossart authored
Fix W=1 warning by nothing variable as always unused. sound/pci/aw2/aw2-saa7146.c: In function ‘snd_aw2_saa7146_interrupt’: sound/pci/aw2/aw2-saa7146.c:333:15: warning: variable ‘iicsta’ set but not used [-Wunused-but-set-variable] 333 | unsigned int iicsta; | ^~~~~~ Signed-off-by: -
Pierre-Louis Bossart authored
Fix W=1 warning. One variable is only used in a conditionally-compiled block, mark as __maybe_unused sound/pci/echoaudio/echoaudio.c: In function ‘snd_echo_probe’: sound/pci/echoaudio/echoaudio.c:1958:6: warning: variable ‘i’ set but not used [-Wunused-but-set-variable] 1958 | int i, err; | ^ Signed-off-by: -
Pierre-Louis Bossart authored
Fix W=1 warnings, mark variables as __always_unused sound/pci/asihpi/asihpi.c: In function ‘snd_asihpi_tuner_band_get’: sound/pci/asihpi/asihpi.c:1907:6: warning: variable ‘num_bands’ set but not used [-Wunused-but-set-variable] 1907 | u32 num_bands; | ^~~~~~~~~ sound/pci/asihpi/asihpi.c: In function ‘snd_asihpi_tuner_band_put’: sound/pci/asihpi/asihpi.c:1934:6: warning: variable ‘num_bands’ set but not used [-Wunused-but-set-variable] 1934 | u32 num_bands; | ^~~~~~~~~ Signed-off-by: -
Pierre-Louis Bossart authored
Fix W=1 warnings. The code certainly predates .rst syntax, adjust as needed. Signed-off-by:
-
Pierre-Louis Bossart authored
Fix W=1 warnings by removing 2 unnecessary initializations and removing a variable that's not used. sound/pci/asihpi/asihpi.c: In function ‘snd_asihpi_tuner_band_get’: sound/pci/asihpi/asihpi.c:1907:6: warning: variable ‘num_bands’ set but not used [-Wunused-but-set-variable] 1907 | u32 num_bands = 0; | ^~~~~~~~~ sound/pci/asihpi/asihpi.c: In function ‘snd_asihpi_tuner_band_put’: sound/pci/asihpi/asihpi.c:1934:6: warning: variable ‘num_bands’ set but not used [-Wunused-but-set-variable] 1934 | u32 num_bands = 0; | ^~~~~~~~~ sound/pci/asihpi/asihpi.c: In function ‘snd_asihpi_mux_info’: sound/pci/asihpi/asihpi.c:2164:6: warning: variable ‘err’ set but not used [-Wunused-but-set-variable] 2164 | int err; | ^~~ Signed-off-by: -
Pierre-Louis Bossart authored
Fix W=1 warning by noting variable as __always_unused. sound/isa/gus/gus_uart.c: In function ‘snd_gf1_interrupt_midi_in’: sound/isa/gus/gus_uart.c:16:22: warning: variable ‘data’ set but not used [-Wunused-but-set-variable] 16 | unsigned char stat, data, byte; Signed-off-by:
-
Pierre-Louis Bossart authored
Fix W=1 warnings by adding prototypes to header file sound/isa/gus/gus_timer.c:141:6: warning: no previous prototype for ‘snd_gf1_timers_init’ [-Wmissing-prototypes] 141 | void snd_gf1_timers_init(struct snd_gus_card * gus) | ^~~~~~~~~~~~~~~~~~~ sound/isa/gus/gus_timer.c:177:6: warning: no previous prototype for ‘snd_gf1_timers_done’ [-Wmissing-prototypes] 177 | void snd_gf1_timers_done(struct snd_gus_card * gus) | ^~~~~~~~~~~~~~~~~~~ Signed-off-by: -
Vinod Koul authored
Also documented the galpess transitions. Please note that these are not really stream states, but show how the stream steps in gapless mode Signed-off-by:
Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20200629134737.105993-3-vkoul@kernel.orgSigned-off-by:
-
Vinod Koul authored
So we had some discussions of the stream states, so I thought it is a good idea to document the state transitions, so add it documentation Reviewed-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by:
-
Randy Dunlap authored
Fix kconfig warnings and lots of subsequent build errors by adding yet another ugly select statement: WARNING: unmet direct dependencies detected for LEDS_CLASS Depends on [n]: NEW_LEDS [=n] Selected by [y]: - SND_HDA_GENERIC [=y] && SOUND [=y] && !UML && SND [=y] && SND_HDA [=y] && SND_HDA_GENERIC_LEDS [=y] WARNING: unmet direct dependencies detected for LEDS_TRIGGERS Depends on [n]: NEW_LEDS [=n] && LEDS_CLASS [=y] Selected by [y]: - SND_HDA_GENERIC [=y] && SOUND [=y] && !UML && SND [=y] && SND_HDA [=y] && SND_HDA_GENERIC_LEDS [=y] Selected by [m]: - MAC80211_LEDS [=y] && NET [=y] && WIRELESS [=y] && MAC80211 [=m] && LEDS_CLASS [=y] - IWLWIFI_LEDS [=y] && NETDEVICES [=y] && WLAN [=y] && WLAN_VENDOR_INTEL [=y] && IWLWIFI [=m] && (LEDS_CLASS [=y]=y || LEDS_CLASS [=y]=IWLWIFI [=m]) && (IWLMVM [=m] || IWLDVM [=m]) WARNING: unmet direct dependencies detected for LEDS_TRIGGER_AUDIO Depends on [n]: NEW_LEDS [=n] && LEDS_TRIGGERS [=y] Selected by [y]: - SND_HDA_GENERIC [=y] && SOUND [=y] && !UML && SND [=y] && SND_HDA [=y] && SND_HDA_GENERIC_LEDS [=y] Fixes: 7cdf8c49 ("ALSA: hda: generic: Add a helper for mic-mute LED with LED classdev") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/01233744-9625-38b3-0342-1b37250dbc72@infradead.orgSigned-off-by:
-
Pierre-Louis Bossart authored
Fix W=1 warning. The kernel doc uses the hwparams type instead of the argument name. Signed-off-by:
-
- 30 Jun, 2020 1 commit
-
-
Alexander Tsoy authored
Fix the following typos in comments and in the code: - KHz -> kHz - procssed -> processed Signed-off-by:
Alexander Tsoy <alexander@tsoy.me> Link: https://lore.kernel.org/r/20200629032607.255419-1-alexander@tsoy.meSigned-off-by:
-
- 25 Jun, 2020 1 commit
-
-
Takashi Iwai authored
The module argument passed to snd_card_new() must be a valid non-NULL pointer when the module support is enabled. Since ASoC driver passes the argument from each snd_soc_card definition, one may forget to set the owner field and lead to a NULL module easily. For catching such an overlook, add a WARN_ON() in snd_card_new(). Also, put the card->module assignment in the ifdef block for a very minor optimization. Link: https://lore.kernel.org/r/20200624160300.21703-1-tiwai@suse.deSigned-off-by:
-
- 19 Jun, 2020 2 commits
-
-
Takashi Iwai authored
This is a patch set inspired by the recent patch Kai-Heng posted about the HD-audio mic-mute LED control. Currently HD-audio driver deals with the mute and mic-mute LED in several different ways: primarily with the direct callback of vmaster hook and capture sync hook, while another with the LED class device binding. The latter has been used for binding with the platform device LEDs like Thinkpad, Dell, Huawei. And, yet, recently we added our own LED classdev for the mic-mute LED on some HP systems although they are controlled directly with the callback; it's exposed, however, for the DMIC that is governed by a different ASoC driver. This patch set is an attempt to sort out and make them consistent: namely, * All LEDs are now controlled via LED class device * The generic driver provides helper functions to easily build up the LED class dev and the relevant mixer controls * Conversion of the existing framework and clean ups The patches are lightly tested in my side with a couple of machines and also through hda-emu tests. Some devices receive new kcontrols for the mute LED behavior (that have been missing so far), but anything else look good though my tests. Link: https://lore.kernel.org/r/20200618110842.27238-1-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
In the end we already enabled the sync-write mode for most of HD-audio controllers including Intel, and it's no big merit to keep the async write mode for the rest. Let's make it as default and drop the superfluous AZX_DCAPS_SYNC_WRITE bit flag. Also, avoid to set the allow_bus_reset flag, which is a quite unstable and hackish behavior that was needed only for some early platforms (decades ago). The straight fallback to the single cmd mode is more robust. Link: https://lore.kernel.org/r/20200618144051.7415-1-tiwai@suse.deSigned-off-by:
-
- 18 Jun, 2020 8 commits
-
-
Takashi Iwai authored
Set LED_CORE_SUSPENDRESUME to LED cdev flags, so that the LED core would store and restore the LED status at suspend/resume. In theory, the codec driver should be responsible for all LED bits, but this might be safer and cover the overlooked cases. Tested-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20200618110842.27238-14-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Both mute and mic-mute LED callbacks do almost similar tasks with just different bits. Factor out the common code and use them from the callbacks for simplification. This ended up with covering the forgotten stuff, too; e.g. VREF LED handling required the temporary power up/down that was missing for the mute LED, or some forgotten polarity checks are added. Tested-by:
-
Takashi Iwai authored
Convert the mute LED handling in Sigmatel/IDT codec to the new vmaster mute helper. A point to be cautiously handled is that the value passed to the callback is inverted; the vmaster passes "enabled" (0 = mute), while LED classdev passes "brightness" (1 = mute). A positive side-effect by this change is that the driver gets also the enum controls for the mute behavior like other drivers already had. Tested-by:
-
Takashi Iwai authored
Convert the mute LED handling in Conexant codec to the new vmaster mute helper. A point to be cautiously handled is that the value passed to the callback is inverted; the vmaster passes "enabled" (0 = mute), while LED classdev passes "brightness" (1 = mute). Also the assignment of the default vmaster hook is moved at a later point after the mute hook is set up. This assures no nested hook. Finally, since we enable the mute-LED kcontrols always in the helper side, the extra vmaster_mute_enum flag set up is dropped. Tested-by:
-
Takashi Iwai authored
Convert the mute LED handling in Realtek codec to the new vmaster mute helper. A point to be cautiously handled is that the value passed to the callback is inverted; the vmaster passes "enabled" (0 = mute), while LED classdev passes "brightness" (1 = mute). The code in Thinkpad helper is also converted. In that case, just call the new function and remove the open-code. Tested-by:
-
Takashi Iwai authored
Like mic-mute LED handling, add a new helper to deal with the master mute LED with LED classdev. Unlike the mic-mute case, the playback master mute is hooked on vmaster, and we suppose no nested hooks allowed there. The classdev creation code is factored out to a common function that is called from both mute and mic-mute LED helpers. Tested-by:
-
Takashi Iwai authored
Now all users of the old snd_hda_gen_add_micmute_led() have been converted to the new LED-classdev variant, and we can make it local, and remove the unused hda_gen_spec.micmute_led.update callback field. Tested-by:
-
Takashi Iwai authored
The fixup function is no longer used. Let's drop. Tested-by:
-
