- 17 Nov, 2020 2 commits
-
-
Tobias Waldekranz authored
Ethertype DSA encodes exactly the same information in the DSA tag as the non-ethertype variety. So refactor out the common parts and reuse them for both protocols. This is ensures tag parsing and generation is always consistent across all mv88e6xxx chips. While we are at it, explicitly deal with all possible CPU codes on receive, making sure to set offload_fwd_mark as appropriate. Signed-off-by:
Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Tobias Waldekranz authored
When receiving an IGMP/MLD frame with a TO_CPU tag, the switch has not performed any forwarding of it. This means that we should not set the offload_fwd_mark on the skb, in case a software bridge wants it forwarded. This is a port of: 1ed9ec9b ("dsa: Allow forwarding of redirected IGMP traffic") Which corrected the issue for chips using EDSA tags, but not for those using regular DSA tags. Signed-off-by:
-
- 16 Nov, 2020 19 commits
-
-
Jakub Kicinski authored
Paolo Abeni says: ==================== mptcp: improve multiple xmit streams support This series improves MPTCP handling of multiple concurrent xmit streams. The to-be-transmitted data is enqueued to a subflow only when the send window is open, keeping the subflows xmit queue shorter and allowing for faster switch-over. The above requires a more accurate msk socket state tracking and some additional infrastructure to allow pushing the data pending in the msk xmit queue as soon as the MPTCP's send window opens (patches 6-10). As a side effect, the MPTCP socket could enqueue data to subflows after close() time - to completely spooling the data sitting in the msk xmit queue. Dealing with the requires some infrastructure and core TCP changes (patches 1-5) Finally, patches 11-12 introduce a more accurate tracking of the other end's receive window. Overall this refactor the MPTCP xmit path, without introducing new features - the new code is covered by the existing self-tests. v2 -> v3: - rebased, - fixed checkpatch issue in patch 1/13 - fixed some state tracking issues in patch 8/13 v1 -> v2: - this is just a repost, to cope with patchwork issues, no changes at all ==================== Link: https://lore.kernel.org/r/cover.1605458224.git.pabeni@redhat.comSigned-off-by:
-
Paolo Abeni authored
When the worker moves some bytes from the OoO queue into the receive queue, the msk->ask_seq is updated, the MPTCP-level ack carrying that value needs to wait the next ingress packet, possibly slowing down or hanging the peer Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Florian Westphal authored
Before sending 'x' new bytes also check that the new snd_una would be within the permitted receive window. For every ACK that also contains a DSS ack, check whether its tcp-level receive window would advance the current mptcp window right edge and update it if so. Signed-off-by:
Florian Westphal <fw@strlen.de> Co-developed-by:
-
Florian Westphal authored
MPTCP maintains a status bit, MPTCP_SEND_SPACE, that is set when at least one subflow and the mptcp socket itself are writeable. mptcp_poll returns EPOLLOUT if the bit is set. mptcp_sendmsg makes sure MPTCP_SEND_SPACE gets cleared when last write has used up all subflows or the mptcp socket wmem. This reworks nospace handling as follows: MPTCP_SEND_SPACE is replaced with MPTCP_NOSPACE, i.e. inverted meaning. This bit is set when the mptcp socket is not writeable. The mptcp-level ack path schedule will then schedule the mptcp worker to allow it to free already-acked data (and reduce wmem usage). This will then wake userspace processes that wait for a POLLOUT event. sendmsg will set MPTCP_NOSPACE only when it has to wait for more wmem (blocking I/O case). poll path will set MPTCP_NOSPACE in case the mptcp socket is not writeable. Normal tcp-level notification (SOCK_NOSPACE) is only enabled in case the subflow socket has no available wmem. Signed-off-by:
-
Paolo Abeni authored
After the previous patch we may end-up with unsent data in the write buffer. If such buffer is full, the writer will block for unlimited time. We need to trigger the MPTCP xmit path even for the subflow rx path, on MPTCP snd_una updates. Keep things simple and just schedule the work queue if needed. Signed-off-by:
-
Paolo Abeni authored
mptcp_sendmsg() is refactored so that first it copies the data provided from user space into the send queue, and then tries to spool the send queue via sendmsg_frag. There a subtle change in the mptcp level collapsing on consecutive data fragment: we now allow that only on unsent data. The latter don't need to deal with msghdr data anymore and can be simplified in a relevant way. snd_nxt and write_seq are now tracked independently. Overall this allows some relevant cleanup and will allow sending pending mptcp data on msk una update in later patch. Co-developed-by:
-
Paolo Abeni authored
We must not close the subflows before all the MPTCP level data, comprising the DATA_FIN has been acked at the MPTCP level, otherwise we could be unable to retransmit as needed. __mptcp_wr_shutdown() shutdown is responsible to check for the correct status and close all subflows. Is called by the output path after spooling any data and at shutdown/close time. In a similar way, __mptcp_destroy_sock() is responsible to clean-up the MPTCP level status, and is called when the msk transition to TCP_CLOSE. The protocol level close() does not force anymore the TCP_CLOSE status, but orphan the msk socket and all the subflows. Orphaned msk sockets are forciby closed after a timeout or when all MPTCP-level data is acked. There is a caveat about keeping the orphaned subflows around: the TCP stack can asynchronusly call tcp_cleanup_ulp() on them via tcp_close(). To prevent accessing freed memory on later MPTCP level operations, the msk acquires a reference to each subflow socket and prevent subflow_ulp_release() from releasing the subflow context before __mptcp_destroy_sock(). The additional subflow references are released by __mptcp_done() and the async ULP release is detected checking ULP ops. If such field has been already cleared by the ULP release path, the dangling context is freed directly by __mptcp_done(). Co-developed-by:
Davide Caratti <dcaratti@redhat.com> Signed-off-by:
-
Paolo Abeni authored
Track the next MPTCP sequence number used on xmit, currently always equal to write_next. Signed-off-by:
-
Paolo Abeni authored
Preparation patch to track the data pending in the msk write queue. No functional change introduced here Signed-off-by:
-
Paolo Abeni authored
The current argument list is pretty long and quite unreadable, move many of them into a specific struct. Later patches will add more stuff to such struct. Additionally drop the 'timeo' argument, now unused. Signed-off-by:
-
Paolo Abeni authored
remove some of code duplications an allow preventing rescheduling on close. Signed-off-by:
-
Paolo Abeni authored
unlocked version of protocol level close, will be used by MPTCP to allow decouple orphaning and subflow level close. Signed-off-by:
-
Paolo Abeni authored
mptcp_push_pending() is called even on orphaned msk (and orphaned subflows), if there is outstanding data at close() time. To cope with the above MPTCP needs to handle explicitly the allocation failure on xmit. The newly introduced do_tcp_sendfrag() allows that, just plug it. We can additionally drop a couple of sanity checks, duplicate in the TCP code. Signed-off-by:
-
Paolo Abeni authored
Will be needed by the next patch, as MPTCP needs to handle directly the error/memory-allocation-needed path. No functional changes intended. Additionally let MPTCP code access the tcp_remove_empty_skb() helper. Signed-off-by:
-
Jakub Kicinski authored
Francis Laniel says: ==================== Fix inefficiences and rename nla_strlcpy This patch set answers to first three issues listed in: https://github.com/KSPP/linux/issues/110 To sum up, the patch contributions are the following: 1. the first patch fixes an inefficiency where some bytes in dst were written twice, one with 0 the other with src content. 2. The second one modifies nla_strlcpy to return the same value as strscpy, i.e. number of bytes written or -E2BIG if src was truncated. It also modifies code that calls nla_strlcpy and checks for its return value. 3. The third renames nla_strlcpy to nla_strscpy. Unfortunately, I did not find how to create struct nlattr objects so I tested my modifications on simple char* and with GDB using tc to get to tcf_proto_check_kind. ==================== Link: https://lore.kernel.org/r/20201115170806.3578-1-laniel_francis@privacyrequired.comSigned-off-by:
-
Francis Laniel authored
Calls to nla_strlcpy are now replaced by calls to nla_strscpy which is the new name of this function. Signed-off-by:
Francis Laniel <laniel_francis@privacyrequired.com> Reviewed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Francis Laniel authored
nla_strlcpy now returns -E2BIG if src was truncated when written to dst. It also returns this error value if dstsize is 0 or higher than INT_MAX. For example, if src is "foo\0" and dst is 3 bytes long, the result will be: 1. "foG" after memcpy (G means garbage). 2. "fo\0" after memset. 3. -E2BIG is returned because src was not completely written into dst. The callers of nla_strlcpy were modified to take into account this modification. Signed-off-by:
-
Francis Laniel authored
Before this commit, nla_strlcpy first memseted dst to 0 then wrote src into it. This is inefficient because bytes whom number is less than src length are written twice. This patch solves this issue by first writing src into dst then fill dst with 0's. Note that, in the case where src length is higher than dst, only 0 is written. Otherwise there are as many 0's written to fill dst. For example, if src is "foo\0" and dst is 5 bytes long, the result will be: 1. "fooGG" after memcpy (G means garbage). 2. "foo\0\0" after memset. Signed-off-by:
-
Heiner Kallweit authored
Improve the following in rtl8169_start_xmit: - tp->cur_tx can be accessed in parallel by rtl_tx(), therefore annotate the race by using WRITE_ONCE - avoid checking stop_queue a second time by moving the doorbell check - netif_stop_queue() uses atomic operation set_bit() that includes a full memory barrier on some platforms, therefore use smp_mb__after_atomic to avoid overhead Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/80085451-3eaf-507a-c7c0-08d607c46fbc@gmail.comSigned-off-by:
-
- 15 Nov, 2020 19 commits
-
-
Lev Stipakov authored
Commit d3fd6548 ("net: core: add dev_sw_netstats_tx_add") has added function "dev_sw_netstats_tx_add()" to update net device per-cpu TX stats. Use this function instead of own code. While on it, remove xfrmi_get_stats64() and replace it with dev_get_tstats64(). Signed-off-by:
Lev Stipakov <lev@openvpn.net> Reviewed-by:
-
Lev Stipakov authored
Commit d3fd6548 ("net: core: add dev_sw_netstats_tx_add") has added function "dev_sw_netstats_tx_add()" to update net device per-cpu TX stats. Use this function instead of own code. While on it, remove internal_get_stats() and replace it with dev_get_tstats64(). Signed-off-by:
-
Jakub Kicinski authored
Ido Schimmel says: ==================== mlxsw: Preparations for nexthop objects support - part 1/2 This patch set contains small and non-functional changes aimed at making it easier to support nexthop objects in mlxsw. Follow up patches can be found here [1]. Patches #1-#4 add a type field to the nexthop group struct instead of the existing protocol field. This will be used later on to add a nexthop object type, which can contain both IPv4 and IPv6 nexthops. Patches #5-#7 move the IPv4 FIB info pointer (i.e., 'struct fib_info') from the nexthop group struct to the route. The pointer will not be available when the nexthop group is a nexthop object, but it needs to be accessible to routes regardless. Patch #8 is the biggest change, but it is an entirely cosmetic change and should therefore be easy to review. The motivation and the change itself are explained in detail in the commit message. Patches #9-#12 perform small changes so that two functions that are currently split between IPv4 and IPv6 could be consolidated in patches Patch #15 removes an outdated comment. [1] https://github.com/idosch/linux/tree/submit/nexthop_objects ==================== Link: https://lore.kernel.org/r/20201113160559.22148-1-idosch@idosch.orgSigned-off-by:
-
Ido Schimmel authored
Since commit 21151f64 ("mlxsw: Add new FIB entry type for reject routes") this comment is no longer correct. Remove it. Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Signed-off-by:
-
Ido Schimmel authored
The two functions are identical, so consolidate them to mlxsw_sp_nexthop_type_fini(). Signed-off-by:
-
Ido Schimmel authored
The two functions are now identical, so consolidate them to mlxsw_sp_nexthop_type_init(). Signed-off-by:
-
Ido Schimmel authored
Remove it as it is unused. Signed-off-by:
-
Ido Schimmel authored
Instead of passing the nexthop and resolving the nexthop netdev from it, pass the nexthop netdev directly. This will later allow us to consolidate code paths between IPv4 and IPv6 code. Signed-off-by:
-
Ido Schimmel authored
Instead of passing the route and resolving the nexthop netdev from it, pass the nexthop netdev directly. This will later allow us to consolidate code paths between IPv4 and IPv6 code. Signed-off-by:
-
Ido Schimmel authored
The overlay protocol (i.e., IPv4/IPv6) that is being encapsulated has no impact on whether a certain IP tunnel can be offloaded or not. Only the underlay protocol matters. Therefore, remove the unused overlay protocol parameter from the callback. This will later allow us to consolidate code paths between IPv4 and IPv6 code. Signed-off-by:
-
Ido Schimmel authored
Currently, the individual nexthops member in the group and attributes of the group (e.g., its type) are stored in the same struct (i.e., 'struct mlxsw_sp_nexthop_group'). This is fine since the individual nexthops cannot change during the lifetime of the group. With nexthop objects this is no longer the case. An existing nexthop group can be replaced to use a new set of nexthops. Creating a new struct whenever a group is replaced entails replacing the group pointer of all the routes (i.e., 'struct mlxsw_sp_fib_entry') using the group. Avoid this inefficient step by splitting the nexthop group configuration to a different struct (i.e., 'struct mlxsw_sp_nexthop_group_info'). When a nexthop group is replaced a new group info struct is created and the individual rotues do not need to be touched. Illustration after the change: mlxsw_sp_fib_entry mlxsw_sp_nexthop_group mlxsw_sp_nexthop_group_info +-------------------+ +----------------------+ +---------------------------+ | nh_group; +--> nhgi; +--> | | | | | | | +-------------------+ +----------------------+ +---------------------------+ No functional changes intended. Signed-off-by:
-
Ido Schimmel authored
Instead of storing the FIB info as 'priv' when the nexthop group represents an IPv4 nexthop group, simply store it as a FIB info with a proper comment. When nexthop objects are supported, this field will become a union with the nexthop object's identifier. Signed-off-by:
-
Ido Schimmel authored
Not used anywhere. Signed-off-by:
-
Ido Schimmel authored
When needed, IPv4 routes fetch the FIB info (i.e., 'struct fib_info') from their associated nexthop group. This will not work when the nexthop group represents a nexthop object (i.e., 'struct nexthop'), as it will only have access to the nexthop's identifier. Instead, store the FIB info in the route itself. Signed-off-by:
-
Ido Schimmel authored
As explained in the previous patch, nexthop objects can have both IPv4 and IPv6 nexthops in the same group. Therefore, move the neighbour table to be a property of the nexthop instead of the nexthop group. Signed-off-by:
-
Ido Schimmel authored
Both IPv4 and IPv6 nexthop groups are hashed in the same table. The protocol field is used to indicate how the hash should be computed for each group. When nexthop group objects are supported, the hash will be computed for them based on the nexthop identifier. To differentiate between all the nexthop group types, encode the type of the group in the key instead of the protocol. Signed-off-by:
-
Ido Schimmel authored
Currently, the type (i.e., IPv4/IPv6) of the nexthop group is derived from the neighbour table associated with the group. This is problematic when nexthop objects are taken into account, as a nexthop group object can contain both IPv4 and IPv6 nexthops. Instead, add a new field that indicates the type of the group and initialize it during the group's creation. Currently, the types are IPv4 ('struct fib_info') and IPv6 ('struct fib6_info'). In the future another type will be added for nexthop objects ('struct nexthop'). Signed-off-by: -
Ido Schimmel authored
When comparing a key with a nexthop group in rhastable's obj_cmpfn() callback, make sure that the key and nexthop group are of the same type (i.e., IPv4 / IPv6). The bug is not currently visible because IPv6 nexthop groups do not populate the FIB info pointer and IPv4 nexthop groups do not set the ifindex for the individual nexthops. Signed-off-by:
-
Alex Shi authored
We don't use the parameter result actually, so better to remove it and skip a gcc warning for unused variable. Signed-off-by:
Alex Shi <alex.shi@linux.alibaba.com> Link: https://lore.kernel.org/r/1605239517-49707-1-git-send-email-alex.shi@linux.alibaba.comSigned-off-by:
-
