- 27 Nov, 2020 8 commits
-
-
Marc Zyngier authored
We currently gate the update of the PMU state on the PMU being "ready". The "ready" state is only set to true when the first vcpu run is successful, and if it isn't, we never reach the update code. So the "ready" state is never the right thing to check for, and it should instead be the presence of the PMU feature, which makes a bit more sense. Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
-
Marc Zyngier authored
The handling of traps in access_pmu_evcntr() has a couple of omminous "else return false;" statements that don't make any sense: the decoding tree coverse all the registers that trap to this handler, and returning false implies that we change PC, which we don't. Get rid of what is evidently dead code. Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
-
Marc Zyngier authored
There is no RAZ/WI handling allowed for the PMU registers in the ARMv8 architecture. Nobody can remember how we cam to the conclusion that we could do this, but the ARMv8 ARM is pretty clear that we cannot. Remove the RAZ/WI handling of the PMU system registers when it is not configured. Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
-
Marc Zyngier authored
The ARMv8 architecture says that in the absence of FEAT_PMUv3, all the PMU-related register generate an UNDEF. Let's make sure that all our PMU handers catch this case by hooking into check_pmu_access_disabled(), and add checks in a couple of other places. Note that we still cannot deliver an exception into the guest as the offending cases are already caught by the RAZ/WI handling. But this puts us one step away to architectural compliance. Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
-
Marc Zyngier authored
We accept to configure a PMU when a vcpu is created, even if the HW (or the host) doesn't support it. This results in failures when attributes get set, which is a bit odd as we should have failed the vcpu creation the first place. Move the check to the point where we check the vcpu feature set, and fail early if we cannot support a PMU. This further simplifies the attribute handling. Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
-
Marc Zyngier authored
We always expose the HW view of PMU in ID_AA64FDR0_EL1.PMUver, even when the PMU feature is disabled, while the architecture says that FEAT_PMUv3 not being implemented should result in this field being zero. Let's follow the architecture's guidance. Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
-
Alexandru Elisei authored
When enabling the PMU in kvm_arm_pmu_v3_enable(), KVM returns early if the PMU flag created is false and skips any other checks. Because PMU emulation is gated only on the VCPU feature being set, this makes it possible for userspace to get away with setting the VCPU feature but not doing any initialization for the PMU. Fix it by returning an error when trying to run the VCPU if the PMU hasn't been initialized correctly. The PMU is marked as created only if the interrupt ID has been set when using an in-kernel irqchip. This means the same check in kvm_arm_pmu_v3_enable() is redundant, remove it. Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20201126144916.164075-1-alexandru.elisei@arm.com
-
Marc Zyngier authored
There are a number of places where we check for the KVM_ARM_VCPU_PMU_V3 feature. Wrap this check into a new kvm_vcpu_has_pmu(), and use it at the existing locations. No functional change. Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
-
- 10 Nov, 2020 20 commits
-
-
Marc Zyngier authored
kvm_coproc.h used to serve as a compatibility layer for the files shared between the 32 and 64 bit ports. Another one bites the dust... Signed-off-by: Marc Zyngier <maz@kernel.org>
-
Marc Zyngier authored
Finally remove one of the biggest 32bit legacy: the copro shadow mapping. We won't missit. Signed-off-by: Marc Zyngier <maz@kernel.org>
-
Marc Zyngier authored
is_aarch32 is only used once, and can be trivially replaced by testing Op0 instead. Drop it. Signed-off-by: Marc Zyngier <maz@kernel.org>
-
Marc Zyngier authored
The is_32bit attribute is now completely unused, drop it. Signed-off-by: Marc Zyngier <maz@kernel.org>
-
Marc Zyngier authored
Similarly to what has been done on the cp15 front, repaint the debug registers to use their AArch64 counterparts. This results in some simplification as we can remove the 32bit-specific accessors. Signed-off-by: Marc Zyngier <maz@kernel.org>
-
Marc Zyngier authored
Move all the cp15 registers over to their AArch64 counterpart. This requires the annotation of a few of them (such as the usual DFAR/IFAR vs FAR_EL1), and a new helper that generates mask/shift pairs for the various configurations. Signed-off-by: Marc Zyngier <maz@kernel.org>
-
Marc Zyngier authored
In order to deal with the few AArch32 system registers that map to only a particular half of their AArch64 counterpart (such as DFAR and IFAR being colocated in FAR_EL1), let's add an optional annotation to the sysreg descriptor structure, indicating whether a register maps to the upper or lower 32bits of a register. Nothing is using these annotation yet. Signed-off-by: Marc Zyngier <maz@kernel.org>
-
Marc Zyngier authored
The use of the AArch32-specific accessors have always been a bit annoying on 64bit, and it is time for a change. Let's move the AArch32 exception injection over to the AArch64 encoding, which requires us to split the two halves of FAR_EL1 into DFAR and IFAR. This enables us to drop the preempt_disable() games on VHE, and to kill the last user of the vcpu_cp15() macro. Signed-off-by: Marc Zyngier <maz@kernel.org>
-
Marc Zyngier authored
ARMv8.2 introduced TTBCR2, which shares TCR_EL1 with TTBCR. Gracefully handle traps to this register when HCR_EL2.TVM is set. Cc: stable@vger.kernel.org Reported-by: James Morse <james.morse@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
-
Marc Zyngier authored
The only use of the register mapping code was for the sake of the LR mapping, which we trivially solved in a previous patch. Get rid of the whole thing now. Signed-off-by: Marc Zyngier <maz@kernel.org>
-
Marc Zyngier authored
Move the AArch32 exception injection code back into the inject_fault.c file, removing the need for a few non-static functions now that AArch32 host support is a thing of the past. Signed-off-by: Marc Zyngier <maz@kernel.org>
-
Marc Zyngier authored
The SPSR setting code is now completely unused, including that dealing with banked AArch32 SPSRs. Cleanup time. Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
-
Marc Zyngier authored
Similarly to what has been done for AArch64, move the AArch32 exception injection to HYP. In order to not use the regmap selection code at EL2, simplify the code populating the target mode's LR register by useing the compatibility aliases for LR_abt and LR_und. We also introduce new accessors for SPSR_abt and SPSR_und, and move VBAR/SCTLR to using the AArch64 accessors (the use of the AArch32 names was an ARMv7 leftover). Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
-
Marc Zyngier authored
Move the AArch64 exception injection code from EL1 to HYP, leaving only the ESR_EL1 updates to EL1. In order to come with the differences between VHE and nVHE, two set of system register accessors are provided. SPSR, ELR, PC and PSTATE are now completely handled in the hypervisor. Signed-off-by: Marc Zyngier <maz@kernel.org>
-
Marc Zyngier authored
Add the basic infrastructure to describe injection of exceptions into a guest. So far, nothing uses this code path. Signed-off-by: Marc Zyngier <maz@kernel.org>
-
Marc Zyngier authored
As we are about to need to access system registers from the HYP code based on their internal encoding, move the direct sysreg accessors to a common include file, with a VHE-specific guard. No functionnal change. Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
-
Marc Zyngier authored
Instead of handling the "PC rollback on SError during HVC" at EL1 (which requires disclosing PC to a potentially untrusted kernel), let's move this fixup to ... fixup_guest_exit(), which is where we do all fixups. Isn't that neat? Signed-off-by: Marc Zyngier <maz@kernel.org>
-
Marc Zyngier authored
In an effort to remove the vcpu PC manipulations from EL1 on nVHE systems, move kvm_skip_instr() to be HYP-specific. EL1's intent to increment PC post emulation is now signalled via a flag in the vcpu structure. Signed-off-by: Marc Zyngier <maz@kernel.org>
-
Marc Zyngier authored
There is no need to feed the result of kvm_vcpu_trap_il_is32bit() to kvm_skip_instr(), as only AArch32 has a variable length ISA, and this helper can equally be called from kvm_skip_instr32(), reducing the complexity at all the call sites. Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
-
Marc Zyngier authored
On SMC trap, the prefered return address is set to that of the SMC instruction itself. It is thus wrong to try and roll it back when an SError occurs while trapping on SMC. It is still necessary on HVC though, as HVC doesn't cause a trap, and sets ELR to returning *after* the HVC. It also became apparent that there is no 16bit encoding for an AArch32 HVC instruction, meaning that the displacement is always 4 bytes, no matter what the ISA is. Take this opportunity to simplify it. Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
-
- 09 Nov, 2020 1 commit
-
-
Linus Torvalds authored
-
- 08 Nov, 2020 11 commits
-
-
Linus Torvalds authored
Merge tag 'driver-core-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core documentation fixes from Greg KH: "Some small Documentation fixes that were fallout from the larger documentation update we did in 5.10-rc2. Nothing major here at all, but all of these have been in linux-next and resolve build warnings when building the documentation files" * tag 'driver-core-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: Documentation: remove mic/index from misc-devices/index.rst scripts: get_api.pl: Add sub-titles to ABI output scripts: get_abi.pl: Don't let ABI files to create subtitles docs: leds: index.rst: add a missing file docs: ABI: sysfs-class-net: fix a typo docs: ABI: sysfs-driver-dma-ioatdma: what starts with /sys
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial fixes from Greg KH: "Here are a small number of small tty and serial fixes for some reported problems for the tty core, vt code, and some serial drivers. They include fixes for: - a buggy and obsolete vt font ioctl removal - 8250_mtk serial baudrate runtime warnings - imx serial earlycon build configuration fix - txx9 serial driver error path cleanup issues - tty core fix in release_tty that can be triggered by trying to bind an invalid serial port name to a speakup console device Almost all of these have been in linux-next without any problems, the only one that hasn't, just deletes code :)" * tag 'tty-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: vt: Disable KD_FONT_OP_COPY tty: fix crash in release_tty if tty->port is not set serial: txx9: add missing platform_driver_unregister() on error in serial_txx9_init tty: serial: imx: enable earlycon by default if IMX_SERIAL_CONSOLE is enabled serial: 8250_mtk: Fix uart_get_baud_rate warning
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are some small USB fixes and new device ids: - USB gadget fixes for some reported issues - Fixes for the ever-troublesome apple fastcharge driver, hopefully we finally have it right. - More USB core quirks for odd devices - USB serial driver fixes for some long-standing issues that were recently found - some new USB serial driver device ids All have been in linux-next with no reported issues" * tag 'usb-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: apple-mfi-fastcharge: fix reference leak in apple_mfi_fc_set_property usb: mtu3: fix panic in mtu3_gadget_stop() USB: serial: option: add Telit FN980 composition 0x1055 USB: serial: option: add LE910Cx compositions 0x1203, 0x1230, 0x1231 USB: serial: cyberjack: fix write-URB completion race USB: Add NO_LPM quirk for Kingston flash drive USB: serial: option: add Quectel EC200T module support usb: raw-gadget: fix memory leak in gadget_setup usb: dwc2: Avoid leaving the error_debugfs label unused usb: dwc3: ep0: Fix delay status handling usb: gadget: fsl: fix null pointer checking usb: gadget: goku_udc: fix potential crashes in probe usb: dwc3: pci: add support for the Intel Alder Lake-S
-
Eddy Wu authored
current->group_leader->exit_signal may change during copy_process() if current->real_parent exits. Move the assignment inside tasklist_lock to avoid the race. Signed-off-by: Eddy Wu <eddy_wu@trendmicro.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Daniel Vetter authored
It's buggy: On Fri, Nov 06, 2020 at 10:30:08PM +0800, Minh Yuan wrote: > We recently discovered a slab-out-of-bounds read in fbcon in the latest > kernel ( v5.10-rc2 for now ). The root cause of this vulnerability is that > "fbcon_do_set_font" did not handle "vc->vc_font.data" and > "vc->vc_font.height" correctly, and the patch > <https://lkml.org/lkml/2020/9/27/223> for VT_RESIZEX can't handle this > issue. > > Specifically, we use KD_FONT_OP_SET to set a small font.data for tty6, and > use KD_FONT_OP_SET again to set a large font.height for tty1. After that, > we use KD_FONT_OP_COPY to assign tty6's vc_font.data to tty1's vc_font.data > in "fbcon_do_set_font", while tty1 retains the original larger > height. Obviously, this will cause an out-of-bounds read, because we can > access a smaller vc_font.data with a larger vc_font.height. Further there was only one user ever. - Android's loadfont, busybox and console-tools only ever use OP_GET and OP_SET - fbset documentation only mentions the kernel cmdline font: option, not anything else. - systemd used OP_COPY before release 232 published in Nov 2016 Now unfortunately the crucial report seems to have gone down with gmane, and the commit message doesn't say much. But the pull request hints at OP_COPY being broken https://github.com/systemd/systemd/pull/3651 So in other words, this never worked, and the only project which foolishly every tried to use it, realized that rather quickly too. Instead of trying to fix security issues here on dead code by adding missing checks, fix the entire thing by removing the functionality. Note that systemd code using the OP_COPY function ignored the return value, so it doesn't matter what we're doing here really - just in case a lone server somewhere happens to be extremely unlucky and running an affected old version of systemd. The relevant code from font_copy_to_all_vcs() in systemd was: /* copy font from active VT, where the font was uploaded to */ cfo.op = KD_FONT_OP_COPY; cfo.height = vcs.v_active-1; /* tty1 == index 0 */ (void) ioctl(vcfd, KDFONTOP, &cfo); Note this just disables the ioctl, garbage collecting the now unused callbacks is left for -next. v2: Tetsuo found the old mail, which allowed me to find it on another archive. Add the link too. Acked-by: Peilin Ye <yepeilin.cs@gmail.com> Reported-by: Minh Yuan <yuanmingbuaa@gmail.com> References: https://lists.freedesktop.org/archives/systemd-devel/2016-June/036935.html References: https://github.com/systemd/systemd/pull/3651 Cc: Greg KH <greg@kroah.com> Cc: Peilin Ye <yepeilin.cs@gmail.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://lore.kernel.org/r/20201108153806.3140315-1-daniel.vetter@ffwll.chSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fixes from Darrick Wong: - Fix an uninitialized struct problem - Fix an iomap problem zeroing unwritten EOF blocks - Fix some clumsy error handling when writeback fails on filesystems with blocksize < pagesize - Fix a retry loop not resetting loop variables properly - Fix scrub flagging rtinherit inodes on a non-rt fs, since the kernel actually does permit that combination - Fix excessive page cache flushing when unsharing part of a file * tag 'xfs-5.10-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: only flush the unshared range in xfs_reflink_unshare xfs: fix scrub flagging rtinherit even if there is no rt device xfs: fix missing CoW blocks writeback conversion retry iomap: clean up writeback state logic on writepage error iomap: support partial page discard on writeback block mapping failure xfs: flush new eof page on truncate to avoid post-eof corruption xfs: set xefi_discard when creating a deferred agfl free log intent item
-
Linus Torvalds authored
Merge procfs splice read fixes from Christoph Hellwig: "Greg reported a problem due to the fact that Android tests use procfs files to test splice, which stopped working with the changes for set_fs() removal. This series adds read_iter support for seq_file, and uses those for various proc files using seq_file to restore splice read support" [ Side note: Christoph initially had a scripted "move everything over" patch, which looks fine, but I personally would prefer us to actively discourage splice() on random files. So this does just the minimal basic core set of proc file op conversions. For completeness, and in case people care, that script was sed -i -e 's/\.proc_read\(\s*=\s*\)seq_read/\.proc_read_iter\1seq_read_iter/g' but I'll wait and see if somebody has a strong argument for using splice on random small /proc files before I'd run it on the whole kernel. - Linus ] * emailed patches from Christoph Hellwig <hch@lst.de>: proc "seq files": switch to ->read_iter proc "single files": switch to ->read_iter proc/stat: switch to ->read_iter proc/cpuinfo: switch to ->read_iter proc: wire up generic_file_splice_read for iter ops seq_file: add seq_read_iter
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "A set of x86 fixes: - Use SYM_FUNC_START_WEAK in the mem* ASM functions instead of a combination of .weak and SYM_FUNC_START_LOCAL which makes LLVMs integrated assembler upset - Correct the mitigation selection logic which prevented the related prctl to work correctly - Make the UV5 hubless system work correctly by fixing up the malformed table entries and adding the missing ones" * tag 'x86-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/platform/uv: Recognize UV5 hubless system identifier x86/platform/uv: Remove spaces from OEM IDs x86/platform/uv: Fix missing OEM_TABLE_ID x86/speculation: Allow IBPB to be conditionally enabled on CPUs with always-on STIBP x86/lib: Change .weak to SYM_FUNC_START_WEAK for arch/x86/lib/mem*_64.S
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fix from Thomas Gleixner: "A single fix for the perf core plugging a memory leak in the address filter parser" * tag 'perf-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Fix a memory leak in perf_event_parse_addr_filter()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull futex fix from Thomas Gleixner: "A single fix for the futex code where an intermediate state in the underlying RT mutex was not handled correctly and triggering a BUG() instead of treating it as another variant of retry condition" * tag 'locking-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: futex: Handle transient "ownerless" rtmutex state correctly
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Thomas Gleixner: "A set of fixes for interrupt chip drivers: - Fix the fallout of the IPI as interrupt conversion in Kconfig and the BCM2836 interrupt chip driver - Fixes for interrupt affinity setting and the handling of hierarchical irq domains in the SiFive PLIC driver - Make the unmapped event handling in the TI SCI driver work correctly - A few minor fixes and cleanups in various chip drivers and Kconfig" * tag 'irq-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: dt-bindings: irqchip: ti, sci-inta: Fix diagram indentation for unmapped events irqchip/ti-sci-inta: Add support for unmapped event handling dt-bindings: irqchip: ti, sci-inta: Update for unmapped event handling irqchip/renesas-intc-irqpin: Merge irlm_bit and needs_irlm irqchip/sifive-plic: Fix chip_data access within a hierarchy irqchip/sifive-plic: Fix broken irq_set_affinity() callback irqchip/stm32-exti: Add all LP timer exti direct events support irqchip/bcm2836: Fix missing __init annotation irqchip/mips: Drop selection of IRQ_DOMAIN_HIERARCHY irqchip/mst: Make mst_intc_of_init static irqchip/mst: MST_IRQ should depend on ARCH_MEDIATEK or ARCH_MSTARV7 genirq: Let GENERIC_IRQ_IPI select IRQ_DOMAIN_HIERARCHY
-