- 11 Aug, 2015 4 commits
-
-
David Daney authored
Currently there is no way to get the MAC address in a firmware independent manner, so set the MAC address of the device directly from the ACPI tables. The binding agrees with the proposed standard here: http://www.uefi.org/sites/default/files/resources/nic-request-v2.pdf Based on code from: Narinder Dhillon <ndhillon@cavium.com> Tomasz Nowicki <tomasz.nowicki@linaro.org> Robert Richter <rrichter@cavium.com> Signed-off-by:
Tomasz Nowicki <tomasz.nowicki@linaro.org> Signed-off-by:
Robert Richter <rrichter@cavium.com> Signed-off-by:
David Daney <david.daney@cavium.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Robert Richter authored
Separate DT code in preparation for follow-on ACPI integration. Based on code from: Tomasz Nowicki <tomasz.nowicki@linaro.org> Signed-off-by:
-
Atzm Watanabe authored
When too many remotes are bound to an FDB entry, index may not be increased. This problem will be caused on the large scale environment that is based on the unicast default destination, for instance. Signed-off-by:
Atzm Watanabe <atzm@iij.ad.jp> Signed-off-by:
-
Fabio Estevam authored
Use '%zx' to print size_t format in order to fix the following build warning: drivers/net/ethernet/mellanox/mlxsw/item.h:65:3: warning: format '%lx' expects argument of type 'long unsigned int', but argument 6 has type 'size_t' [-Wformat=] Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
- 10 Aug, 2015 36 commits
-
-
yalin wang authored
This change isdn driver, remove reverse_bits() function, use the generic revbit8() function instead. Signed-off-by:
yalin wang <yalin.wang2010@gmail.com> Signed-off-by:
-
Dan Carpenter authored
Add or remove some tabs so that statements line up correctly. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Andrew Lunn authored
When using a cluster of switches, some topologies will have an MDIO bus per switch, not one for the whole cluster. Allow this to be represented in the device tree, by adding an optional mii-bus property at the switch level. The old platform_device method of instantiation supports this already, so only the device tree binding needs extending with an additional optional phandle. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Andrew Lunn authored
Add register definitions #defines for accessing the EEPROM. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
David S. Miller authored
Pravin B Shelar says: ==================== GRE: Use flow based tunneling for OVS GRE vport. Following patches make use of new Using GRE tunnel meta data collection feature. This allows us to directly use netdev based GRE tunnel implementation. While doing so I have removed GRE demux API which were targeted for OVS. Most of GRE protocol code is now consolidated in ip_gre module. v5-v4: Fixed Kconfig dependency for vport-gre module. v3-v4: Added interface to ip-gre device to enable meta data collection. While doing this I split second patch into two patches. v2-v3: Add API to create GRE flow based device. ==================== Signed-off-by: -
Pravin B Shelar authored
Support for sharing GREPROTO_CISCO port was added so that OVS gre port and kernel GRE devices can co-exist. After flow-based tunneling patches OVS GRE protocol processing is completely moved to ip_gre module. so there is no need for GRE protocol hook. Following patch consolidates GRE protocol related functions into ip_gre module. Signed-off-by:
Pravin B Shelar <pshelar@nicira.com> Acked-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
-
Pravin B Shelar authored
Using GRE tunnel meta data collection feature, we can implement OVS GRE vport. This patch removes all of the OVS specific GRE code and make OVS use a ip_gre net_device. Minimal GRE vport is kept to handle compatibility with current userspace application. Signed-off-by:
-
Pravin B Shelar authored
Following patch create new tunnel flag which enable tunnel metadata collection on given device. Signed-off-by:
-
Pravin B Shelar authored
This function will be used in gre and geneve vport implementations. Signed-off-by:
-
Rick Jones authored
Add an explicit neighbour table overflow message (ratelimited) and statistic to make diagnosing neighbour table overflows tractable in the wild. Diagnosing a neighbour table overflow can be quite difficult in the wild because there is no explicit dmesg logged. Callers to neighbour code seem to use net_dbg_ratelimit when the neighbour call fails which means the "base message" is not emitted and the callback suppressed messages from the ratelimiting can end-up juxtaposed with unrelated messages. Further, a forced garbage collection will increment a stat on each call whether it was successful in freeing-up a table entry or not, so that statistic is only a hint. So, add a net_info_ratelimited message and explicit statistic to the neighbour code. Signed-off-by:
Rick Jones <rick.jones2@hp.com> Signed-off-by:
-
Nikolay Aleksandrov authored
This patch adds the ability to toggle the vlan filtering support via netlink. Since we're already running with rtnl in .changelink() we don't need to take any additional locks. Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
David S. Miller authored
Shahed Shaikh says: ==================== qlcnic: enhancements This series adds few enhancements. o Patch from Harish reorders the sequence of header files inclusion, keeping kernel's header files on top. o Firmware introduced a new feature which allows driver to increases the size of firmware dump of iSCSI function which is being collected by NIC driver. o Print buffer address which is holding a firmware dump. o Use vzalloc() instead kzalloc() for allocating large chunk of memory which will avoid potential memory allocation failure. o Add new device ID for 0x8C30 which is a 83xx series based VF function. Please apply this series to net-next. ==================== Signed-off-by: -
Shahed Shaikh authored
Signed-off-by:
Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by:
-
Shahed Shaikh authored
Driver allocates a large chunk of temporary buffer using kzalloc to copy FW image. As there is no real need of this memory to be physically contiguous, use vzalloc instead. Signed-off-by:
-
Shahed Shaikh authored
This is a 83xx series based VF device Signed-off-by:
-
Shahed Shaikh authored
Signed-off-by:
-
Shahed Shaikh authored
In some cases it is required to capture minidump for iSCSI functions as part of default minidump collection process. To enable this, firmware exports it's capability and driver need to enable that capability by issuing a mailbox command. With this feature, firmware can provide additional iSCSI function's minidump with smaller minidump capture mask (0x1f). Signed-off-by:
-
Harish Patil authored
Include local headers files after kernel's header files. Signed-off-by:
Harish Patil <harish.patil@qlogic.com> Signed-off-by:
-
Madalin Bucur authored
For the Marvel 88e1111 PHY only two SGMII modes are available, both allowing only SGMII to copper mode (with or without clock). SGMII to fiber mode is not supported. Make sure the fiber/copper registers selector bits are cleared for selecting copper mode. Signed-off-by:
Madalin Bucur <madalin.bucur@freescale.com> Signed-off-by:
Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by:
-
Kevin Hao authored
When we transmit a fragmented skb, we may run into a race like the following scenario (assume txq->cur_tx is next to txq->dirty_tx): cpu 0 cpu 1 fec_enet_txq_submit_skb reserve a bdp for the first fragment fec_enet_txq_submit_frag_skb update the bdp for the other fragment update txq->cur_tx fec_enet_tx_queue bdp = fec_enet_get_nextdesc(txq->dirty_tx, fep, queue_id); This bdp is the bdp reserved for the first segment. Given that this bdp BD_ENET_TX_READY bit is not set and txq->cur_tx is already pointed to a bdp beyond this one. We think this is a completed bdp and try to reclaim it. update the bdp for the first segment update txq->cur_tx So we shouldn't update the txq->cur_tx until all the update to the bdps used for fragments are performed. Also add the corresponding memory barrier to guarantee that the update to the bdps, dirty_tx and cur_tx performed in the proper order. Signed-off-by:Kevin Hao <haokexin@gmail.com> Signed-off-by:
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: Couple of fixes/adjustments Ido Schimmel (5): mlxsw: Call free_netdev when removing port mlxsw: Make system port to local port mapping explicit mlxsw: Simplify mlxsw_sx_port_xmit function mlxsw: Use correct skb length when dumping payload mlxsw: Fix use-after-free bug in mlxsw_sx_port_xmit Jiri Pirko (2): mlxsw: Make pci module dependent on HAS_DMA and HAS_IOMEM mlxsw: Strip FCS from incoming packets ==================== Signed-off-by: -
Ido Schimmel authored
Store the length of the skb before transmitting it and use it for stats instead of skb->len, since skb might have been freed already. This issue was discovered using the Kernel Address sanitizer (KASan). Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Ido Schimmel authored
Do not use the length of the transmitted skb (which was freed), but that of the response skb. This issue was discovered using the Kernel Address sanitizer (KASan). Signed-off-by:
-
Ido Schimmel authored
Previously we only checked if the transmission queue is not full in the middle of the xmit function. This lead to complex logic due to the fact that sometimes we need to reallocate the headroom for our Tx header. Allow the switch driver to know if the transmission queue is not full before sending the packet and remove this complex logic. Signed-off-by:
-
Jiri Pirko authored
FCS of incoming packets is already checked by HW. Just strip it out. Signed-off-by:
-
Jiri Pirko authored
This resolves compile errors on um-allyesconfig. Note that there are many other drivers which have the same issue. Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
-
Ido Schimmel authored
System ports are unique identifiers in a multi-ASIC environment that represent all the available ports in the system. Local ports on the other hand, are unique only within the local ASIC. Since system port to local port mapping is not part of the HW-SW contract and since only single-ASIC configurations are currently supported, set an explicit 1:1 mapping by configuring the Switch System Port Record (SSPR) register. Signed-off-by:
-
Ido Schimmel authored
When removing a port's netdevice we should also free the memory allocated by alloc_etherdev(). Do this by calling free_netdev() at the end of the teardown sequence. Reported-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Masanari Iida authored
This patch fix double word "the the" in Documentation/DocBook/networking/API-eth-get-headlen.html Documentation/DocBook/networking/netdev.html Documentation/DocBook/networking.xml These files are generated from comment in source, so I have to fix comment in net/ethernet/eth.c. Signed-off-by:
Masanari Iida <standby24x7@gmail.com> Signed-off-by:
-
Shaohui Xie authored
RTL8211DN is compatible with RTL8211E. Signed-off-by:
-
Robert Shearman authored
RFC 4182 s2 states that if an IPv4 Explicit NULL label is the only label on the stack, then after popping the resulting packet must be treated as a IPv4 packet and forwarded based on the IPv4 header. The same is true for IPv6 Explicit NULL with an IPv6 packet following. Therefore, when installing the IPv4/IPv6 Explicit NULL label routes, add an attribute that specifies the expected payload type for use at forwarding time for determining the type of the encapsulated packet instead of inspecting the first nibble of the packet. Signed-off-by:
Robert Shearman <rshearma@brocade.com> Signed-off-by:
-
David S. Miller authored
Kaixu Xia says: ==================== bpf: Introduce the new ability of eBPF programs to access hardware PMU counter This patchset is base on the net-next: git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git commit 9dc20a64. Previous patch v6 url: https://lkml.org/lkml/2015/8/4/188 changes in V7: - rebase the whole patch set to net-next tree(9dc20a64); - split out the core perf APIs into Patch 1/5; - change the return value of function perf_event_attrs() from struct perf_event * to const struct perf_event * in Patch 1/5; - rename the function perf_event_read_internal() to perf_event_ read_local() and rewrite it in Patch 1/5; - rename the function check_func_limit() to check_map_func _compatibility() and remove the unnecessary pass pointer to a pointer in Patch 4/5; changes in V6: - make the Patch 1/4 commit message more meaning and readable; - remove the unnecessary comment in Patch 2/4 and make it clean; - declare the function perf_event_release_kernel() in include/ linux/perf_event.h to fix the build error when CONFIG_PERF_EVENTS isn't configured in Patch 2/4; - add function perf_event_attrs() to get the struct perf_event_attr in Patch 2/4. - move the related code from kernel/trace/bpf_trace.c to kernel/ events/core.c and add function perf_event_read_internal() to avoid poking inside of the event outside of perf code in Patch 3/4; - generial the func & map match-pair with an array in Patch 3/4; changes in V5: - move struct fd_array_map_ops* fd_ops to bpf_map; - move array perf event decrement refcnt function to map_free; - fix the NULL ptr of perf_event_get(); - move bpf_perf_event_read() to kernel/bpf/bpf_trace.c; - get rid of the remaining struct bpf_prog; - move the unnecessay cast on void *; changes in V4: - make the bpf_prog_array_map more generic; - fix the bug of event refcnt leak; - use more useful errno in bpf_perf_event_read(); changes in V3: - collapse V2 patches 1-3 into one; - drop the function map->ops->map_traverse_elem() and release the struct perf_event in map_free; - only allow to access bpf_perf_event_read() from programs; - update the perf_event_array_map elem via xchg(); - pass index directly to bpf_perf_event_read() instead of MAP_KEY; changes in V2: - put atomic_long_inc_not_zero() between fdget() and fdput(); - limit the event type to PERF_TYPE_RAW and PERF_TYPE_HARDWARE; - Only read the event counter on current CPU or on current process; - add new map type BPF_MAP_TYPE_PERF_EVENT_ARRAY to store the pointer to the struct perf_event; - according to the perf_event_map_fd and key, the function bpf_perf_event_read() can get the Hardware PMU counter value; Patch 5/5 is a simple example and shows how to use this new eBPF programs ability. The PMU counter data can be found in /sys/kernel/debug/tracing/trace(trace_pipe).(the cycles PMU value when 'kprobe/sys_write' sampling) $ cat /sys/kernel/debug/tracing/trace_pipe $ ./tracex6 ... syslog-ng-548 [000] d..1 76.905673: : CPU-0 681765271 syslog-ng-548 [000] d..1 76.905690: : CPU-0 681787855 syslog-ng-548 [000] d..1 76.905707: : CPU-0 681810504 syslog-ng-548 [000] d..1 76.905725: : CPU-0 681834771 syslog-ng-548 [000] d..1 76.905745: : CPU-0 681859519 syslog-ng-548 [000] d..1 76.905766: : CPU-0 681890419 syslog-ng-548 [000] d..1 76.905783: : CPU-0 681914045 syslog-ng-548 [000] d..1 76.905800: : CPU-0 681935950 syslog-ng-548 [000] d..1 76.905816: : CPU-0 681958299 ls-690 [005] d..1 82.241308: : CPU-5 3138451 sh-691 [004] d..1 82.244570: : CPU-4 7324988 <...>-699 [007] d..1 99.961387: : CPU-7 3194027 <...>-695 [003] d..1 99.961474: : CPU-3 288901 <...>-695 [003] d..1 99.961541: : CPU-3 383145 <...>-695 [003] d..1 99.961591: : CPU-3 450365 <...>-695 [003] d..1 99.961639: : CPU-3 515751 <...>-695 [003] d..1 99.961686: : CPU-3 579047 ... The detail of patches is as follow: Patch 1/5 add the necessary core perf APIs perf_event_attrs(), perf_event_get(),perf_event_read_local() when accessing events counters in eBPF programs Patch 2/5 rewrites part of the bpf_prog_array map code and make it more generic; Patch 3/5 introduces a new bpf map type. This map only stores the pointer to struct perf_event; Patch 4/5 implements function bpf_perf_event_read() that get the selected hardware PMU conuter; Patch 5/5 gives a simple example. ==================== Signed-off-by:
-
Kaixu Xia authored
This is a simple example and shows how to use the new ability to get the selected Hardware PMU counter value. Signed-off-by:
Kaixu Xia <xiakaixu@huawei.com> Signed-off-by:
-
Kaixu Xia authored
According to the perf_event_map_fd and index, the function bpf_perf_event_read() can convert the corresponding map value to the pointer to struct perf_event and return the Hardware PMU counter value. Signed-off-by:
-
Kaixu Xia authored
Introduce a new bpf map type 'BPF_MAP_TYPE_PERF_EVENT_ARRAY'. This map only stores the pointer to struct perf_event. The user space event FDs from perf_event_open() syscall are converted to the pointer to struct perf_event and stored in map. Signed-off-by:
-
Wang Nan authored
All the map backends are of generic nature. In order to avoid adding much special code into the eBPF core, rewrite part of the bpf_prog_array map code and make it more generic. So the new perf_event_array map type can reuse most of code with bpf_prog_array map and add fewer lines of special code. Signed-off-by:
Wang Nan <wangnan0@huawei.com> Signed-off-by:
-
