Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit f2dba9c6 ("rhashtable: Introduce rhashtable_walk_*") forgot to
initialize the members of struct rhashtable_walker after allocating it, which
caused an undefined value for 'resize' which is used later on.

Fixes: f2dba9c6 ("rhashtable: Introduce rhashtable_walk_*")
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Johan Hedberg says:

====================
pull request: bluetooth 2015-02-23

Here's one important fix for the 4.0-rc series. Refactoring of Intel
Bluetooth controller detection ended up disabling some older ones which
are based on CSR hardware. This patch re-introduces the necessary USB id
and fixes the breakage.

Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Older Wireless controllers from Intel used CSR chips to provide support
for Bluetooth.

The commit d0ac9eb7 (Bluetooth: btusb: Ignore unknown Intel devices
with generic descriptor) disabled these older controllers. To enable
them again, put them into the blacklist and mark them clearly as CSR
based controllers.

T:  Bus=02 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#=  3 Spd=12   MxCh= 0
D:  Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=8087 ProdID=07da Rev=78.69
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
Reported-by: Kenneth R. Crudup <kenny@panix.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>

tcp_should_expand_sndbuf() does not expand the send buffer if we have
filled the congestion window.

However, it should use tcp_packets_in_flight() instead of
tp->packets_out to make this check.

Testing has established that the difference matters a lot if there are
many SACKed packets, causing a needless performance shortfall.
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Nandita Dukkipati <nanditad@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Trying to use burst capability (aka xmit_more) on a virtual device
like bonding is not supported.

For example, skb might be queued multiple times on a qdisc, with
various list corruptions.

Fixes: 38b2cf29 ("net: pktgen: packet bursting via skb->xmit_more")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are certain regressions which are pointing to
these two commits which we are having a hard time
resolving.  So revert them for now.

Specifically this reverts:

	commit 0bec3b70
	Author: Florian Westphal <fw@strlen.de>
	Date:   Wed Jan 7 10:49:49 2015 +0100

	    r8169: add support for xmit_more

and

	commit 1e918876
	Author: Florian Westphal <fw@strlen.de>
	Date:   Wed Oct 1 13:38:03 2014 +0200

	    r8169: add support for Byte Queue Limits

There were some attempts by Eric Dumazet to address some obvious
problems in the TX flow, to see if they would fix the problems,
but none of them seem to help for the regression reporters.
Signed-off-by: David S. Miller <davem@davemloft.net>

Use helper functions to access current->state.
Direct assignments are prone to races and therefore buggy.

current->state = TASK_RUNNING is replaced by __set_current_state()

Thanks to Peter Zijlstra for the exact definition of the problem.
Suggested-By: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Acked-By: Jan "Yenya" Kasprzak <kas@fi.muni.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use helper functions to access current->state.
Direct assignments are prone to races and therefore buggy.

Thanks to Peter Zijlstra for the exact definition of the problem.
Suggested-By: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use helper function to access current->state.
Direct assignments are prone to races and therefore buggy.

Thanks to Peter Zijlstra for the exact definition of the problem.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

Packets defragmentation was introduced for PACKET_FANOUT_HASH only,
see 7736d33f ("packet: Add pre-defragmentation support for ipv4
fanouts")

It may be useful to have defragmentation enabled regardless of
fanout type. Without that, the AF_PACKET user may have to:
1. Collect fragments from different rings
2. Defragment by itself
Signed-off-by: Alexander Drozdov <al.drozdov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

struct bucket_table contains mostly read fields :

size, locks_mask, locks.

Make sure these are not sharing a cache line with buckets[]
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

colons are used as a separator in netdev device lookup in dev_ioctl.c

Specific functions are SIOCGIFTXQLEN SIOCETHTOOL SIOCSIFNAME
Signed-off-by: Matthew Thode <mthode@mthode.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Reading 64-bits register was not working because we inverted the steps
between reading the lower 32-bits of the register and reading the upper
32-bits. Swapping these operations is how the HW guarantees that 64-bits
reads are latched correctly. We only have a handful of 64-bits registers
for now, mostly MIB counters, so the imapct is low.

Fixes: 246d7f77 ("net: dsa: add Broadcom SF2 switch driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There's no good reason why to disallow unloading of the rhashtable
test case module.

Commit 9d6dbe1b moved the code from a boot test into a stand-alone
module, but only converted the subsys_initcall() handler into a
module_init() function without a related exit handler, and thus
preventing the test module from unloading.

Fixes: 9d6dbe1b ("rhashtable: Make selftest modular")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

When trying to allocate future tables via bucket_table_alloc(), it seems
overkill on large table shifts that we probe for kzalloc() unconditionally
first, as it's likely to fail.

Only probe with kzalloc() for more reasonable table sizes and use vzalloc()
either as a fallback on failure or directly in case of large table sizes.

Fixes: 7e1e7763 ("lib: Resizable, Scalable, Concurrent Hash Table")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Restore pre 54c5b7d3 behaviour and only probe for expansions on inserts
and shrinks on deletes. Currently, it will happen that on initial inserts
into a sparse hash table, we may i.e. shrink it first simply because it's
not fully populated yet, only to later realize that we need to grow again.

This however is counter intuitive, e.g. an initial default size of 64
elements is already small enough, and in case an elements size hint is given
to the hash table by a user, we should avoid unnecessary expansion steps,
so a shrink is clearly unintended here.

Fixes: 54c5b7d3 ("rhashtable: introduce rhashtable_wakeup_worker helper function")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Ying Xue <ying.xue@windriver.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter/IPVS fixes for net

The following patchset contains updates for your net tree, they are:

1) Fix removal of destination in IPVS when the new mixed family support
   is used, from Alexey Andriyanov via Simon Horman.

2) Fix module refcount undeflow in nft_compat when reusing a match /
   target.

3) Fix iptables-restore when the recent match is used with a new hitcount
   that exceeds threshold, from Florian Westphal.

4) Fix stack corruption in xt_socket due to using stack storage to save
   the inner IPv6 header, from Eric Dumazet.

I'll follow up soon with another batch with more fixes that are still
cooking.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The cfpkt_iterate() function can return -EPROTO on error, but the
function is a u16 so the negative value gets truncated to a positive
unsigned short.  This causes a static checker warning.

The only caller which might care is cffrml_receive(), when it's checking
the frame checksum.  I modified cffrml_receive() so that it never says
-EPROTO is a valid checksum.

Also this isn't ever going to be inlined so I removed the "inline".
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Issue caught by 0-day kernel test infrastructure. Code changed to use sockaddr
members so that %pISc can be used instead.

Fixes: b5a02f50 ('cxgb4 : Update ipv6 address handling api')
Signed-off-by: Anish Bhatt <anish@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit aafb3e98 (netdev: introduce new NETIF_F_HW_SWITCH_OFFLOAD feature
flag for switch device offloads) add a new feature without adding it to
netdev_features_strings array; this patch fixes this.
Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipvlan was added into 3.19 release and iproute2 added support
for the same in iproute2-3.19 package.
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
CC: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

With object runtime debugging enabled, the rhashtable test suite
will rightfully throw a warning "ODEBUG: object is on stack, but
not annotated" from rhashtable_init().

This is because run_work is (correctly) being initialized via
INIT_WORK(), and not annotated by INIT_WORK_ONSTACK(). Meaning,
rhashtable_init() is okay as is, we just need to move ht e.g.,
into global scope.

It never triggered anything, since test_rhashtable is rather a
controlled environment and effectively runs to completion, so
that stack memory is not vanishing underneath us, we shouldn't
confuse any testers with it though.

Fixes: 7e1e7763 ("lib: Resizable, Scalable, Concurrent Hash Table")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ltpc driver is rather outdated and does not get built on most
platforms because it requires the ISA_DMA_API symbol. However
there are some ARM platforms that have ISA_DMA_API but no virt_to_bus,
and they get this build error when enabling the ltpc driver.

drivers/net/appletalk/ltpc.c: In function 'handlefc':
drivers/net/appletalk/ltpc.c:380:2: error: implicit declaration of function 'virt_to_bus' [-Werror=implicit-function-declaration]
  set_dma_addr(dma,virt_to_bus(ltdmacbuf));
  ^

This adds another dependency in Kconfig to avoid that configuration.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The smc91x driver tries to support multiple platforms at compile
time, but they are mutually exclusive at runtime, and not clearly
defined.

Trying to build for CONFIG_SA1100_ASSABET without CONFIG_ASSABET_NEPONSET
results in this link error:

drivers/built-in.o: In function `smc_drv_probe':
:(.text+0x33310c): undefined reference to `neponset_ncr_frob'

since the neponset_ncr_set function is not defined otherwise.

Similarly, building for both CONFIG_SA1100_ASSABET and CONFIG_SA1100_PLEB
results in a different build error:

smsc/smc91x.c: In function 'smc_drv_probe':
smsc/smc91x.c:2299:2: error: implicit declaration of function 'neponset_ncr_set' [-Werror=implicit-function-declaration]
  neponset_ncr_set(NCR_ENET_OSC_EN);
  ^
smsc/smc91x.c:2299:19: error: 'NCR_ENET_OSC_EN' undeclared (first use in this function)
  neponset_ncr_set(NCR_ENET_OSC_EN);
                   ^

This is an attempt to fix the call site responsible for both
errors, making sure we call the function exactly when the driver
is actually trying to run on the assabet/neponset machine. With
this patch, I no longer see randconfig build errors in this file.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Non NAPI drivers can call skb_tstamp_tx() and then sock_queue_err_skb()
from hard IRQ context.

Therefore, sock_dequeue_err_skb() needs to block hard irq or
corruptions or hangs can happen.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Fixes: 364a9e93 ("sock: deduplicate errqueue dequeue")
Fixes: cb820f8e ("net: Provide a generic socket error queue delivery method for Tx time stamps.")
Signed-off-by: David S. Miller <davem@davemloft.net>

skb_gro_remcsum_init() initializes the gro_remcsum.delta member only,
leading to compiler warnings about a possibly uninitialized
gro_remcsum.offset member:

drivers/net/vxlan.c: In function ‘vxlan_gro_receive’:
drivers/net/vxlan.c:602: warning: ‘grc.offset’ may be used uninitialized in this function
net/ipv4/fou.c: In function ‘gue_gro_receive’:
net/ipv4/fou.c:262: warning: ‘grc.offset’ may be used uninitialized in this function

While these are harmless for now:
  - skb_gro_remcsum_process() sets offset before changing delta,
  - skb_gro_remcsum_cleanup() checks if delta is non-zero before
    accessing offset,
it's safer to let the initialization function initialize all members.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If both promisc and allmulti are set, promisc should trump allmulti and
disable the MAC filter; otherwise, the interface is not really promisc.

Previously, this code checked IFF_ALLMULTI prior to and without regard for
IFF_PROMISC; if both were set, only multicast and direct unicast traffic
would make it through the filter.
Signed-off-by: Derrick Pallas <pallas@meraki.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Open vSwitch allows moving internal vport to different namespace
while still connected to the bridge. But when namespace deleted
OVS does not detach these vports, that results in dangling
pointer to netdevice which causes kernel panic as follows.
This issue is fixed by detaching all ovs ports from the deleted
namespace at net-exit.

BUG: unable to handle kernel NULL pointer dereference at 0000000000000028
IP: [<ffffffffa0aadaa5>] ovs_vport_locate+0x35/0x80 [openvswitch]
Oops: 0000 [#1] SMP
Call Trace:
 [<ffffffffa0aa6391>] lookup_vport+0x21/0xd0 [openvswitch]
 [<ffffffffa0aa65f9>] ovs_vport_cmd_get+0x59/0xf0 [openvswitch]
 [<ffffffff8167e07c>] genl_family_rcv_msg+0x1bc/0x3e0
 [<ffffffff8167e319>] genl_rcv_msg+0x79/0xc0
 [<ffffffff8167d919>] netlink_rcv_skb+0xb9/0xe0
 [<ffffffff8167deac>] genl_rcv+0x2c/0x40
 [<ffffffff8167cffd>] netlink_unicast+0x12d/0x1c0
 [<ffffffff8167d3da>] netlink_sendmsg+0x34a/0x6b0
 [<ffffffff8162e140>] sock_sendmsg+0xa0/0xe0
 [<ffffffff8162e5e8>] ___sys_sendmsg+0x408/0x420
 [<ffffffff8162f541>] __sys_sendmsg+0x51/0x90
 [<ffffffff8162f592>] SyS_sendmsg+0x12/0x20
 [<ffffffff81764ee9>] system_call_fastpath+0x12/0x17
Reported-by: Assaf Muller <amuller@redhat.com>
Fixes: 46df7b81("openvswitch: Add support for network namespaces.")
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Reviewed-by: Thomas Graf <tgraf@noironetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In tcf_em_validate(), after calling request_module() to load the
kind-specific module, set em->ops to NULL before returning -EAGAIN, so
that module_put() is not called again by tcf_em_tree_destroy().
Signed-off-by: Ignacy Gawędzki <ignacy.gawedzki@green-communications.fr>
Acked-by: Cong Wang <cwang@twopensource.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

phy_init_eee uses phy_find_setting(phydev->speed, phydev->duplex)
to find a valid entry in the settings array for the given speed
and duplex value. For full duplex 1000baseT, this will return
the first matching entry, which is the entry for 1000baseKX_Full.

If the phy eee does not support 1000baseKX_Full, this entry will not
match, causing phy_init_eee to fail for no good reason.

Fixes: 9a9c56cb ("net: phy: fix a bug when verify the EEE support")
Fixes: 3e707706 ("phy: Expand phy speed/duplex settings array")
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

skb_copy_bits() returns zero on success and negative value on error,
so it is needed to invert the condition in ip_check_defrag().

Fixes: 1bf3751e ("ipv4: ip_check_defrag must not modify skb before unsharing")
Signed-off-by: Alexander Drozdov <al.drozdov@gmail.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The National Instruments USB Host-to-Host Cable is based on the Prolific
PL-25A1 chipset.  Add its VID/PID so the plusb driver will recognize it.
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ehea creates memory hotplug, reboot and crash hooks even if there
are no adapters in the box. Just create them when we probe our
first adapter.

[cascardo: use ehea_register_memory_hooks return code]
Signed-off-by: Anton Blanchard <anton@samba.org>
Tested-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The gnet_stats_copy_app() function gets called, more often than not, with its
second argument a pointer to an automatic variable in the caller's stack.
Therefore, to avoid copying garbage afterwards when calling
gnet_stats_finish_copy(), this data is better copied to a dynamically allocated
memory that gets freed after use.

[xiyou.wangcong@gmail.com: remove a useless kfree()]
Signed-off-by: Ignacy Gawędzki <ignacy.gawedzki@green-communications.fr>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull MFD updates from Lee Jones:
 "Changes to existing drivers:
   - fixr platform device collision; da9052, wm8994-core
   - regmap configuration amendments; tps65218
   - fix runtime PM deadlock; rtsx_usb
   - remove unused/superfluous code; db8500-prcmu, omap-usb-host
   - enable watchdog timer; lpc_sch
   - add start/stop RX URBs helpers; dln2
   - remove platform device (DT only); max77686, max77802
   - support suspend and resume; dln2
   - add Device Tree support; da9063
   - extra error checking; intel_soc_pmic
   - const'ify all the things; 88pm860x, hi6421-pmic, intel_soc_pmic,
                               max77686, lm3533, retu, pcf50633,
                               davinci_voicecodec, smsc-ece1099,
                               tps65218, mc13xxx, tps65217, twl-core,
                               twl6040

  New drivers/supported devices:
   - new driver for Richtek RT5033
   - new driver for DA9150 Charger and FuelGauge
   - new driver for Qualcomm Resource Power Manager (RPM)
   - add support for the ir-clk into sun6i-prcm
   - add support for FuelGauge into axp20x"

* tag 'mfd-for-linus-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (32 commits)
  mfd: intel_soc_pmic: Add missing error check for devm_kzalloc
  mfd: rtsx_usb: Defer autosuspend while card exists
  mfd: devicetree: Add bindings for DA9063
  mfd: da9063: Add device tree support
  regulator: qcom-rpm: Add missing state flag in call to RPM
  mfd: qcom-rpm: Driver for the Qualcomm RPM
  mfd: devicetree: bindings: Add Qualcomm RPM DT binding
  mfd: max77686/802: Remove support for board files
  mfd: omap-usb-host: Remove some unused functions
  mfd: twl6040: Constify struct regmap_config and reg_default array
  mfd: twl-core: Constify struct regmap_config and reg_default array
  mfd: tps65217: Constify struct regmap_config
  mfd: mc13xxx: i2c/spi: Constify struct regmap_config
  mfd: tps65218: Constify struct regmap_config
  mfd: smsc-ece1099: Constify struct regmap_config
  mfd: davinci_voicecodec: Constify struct regmap_config
  mfd: pcf50633: Constify struct regmap_config
  mfd: retu: Constify struct regmap_config
  mfd: lm3533: Constify struct regmap_config
  mfd: max77686: Constify struct regmap_config
  ...

Merge tag 'pwm/for-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "This contains two new drivers, one for Allwinner SoCs and the other
  for Imagination Technologies' Pistachio SoC.

  Complementing this are a couple of fixes to the Atmel HLCDC PWM and
  STi PWM drivers as well as minor cleanups to the core and the Tegra
  driver"

* tag 'pwm/for-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: tegra: Use NSEC_PER_SEC
  pwm: Remove unnecessary check before of_node_put()
  pwm: Add device tree binding document for IMG PWM DAC
  pwm: Imagination Technologies PWM DAC driver
  pwm: sti: Maintain a bitmap of configured devices
  pwm: sunxi: document OF bindings
  pwm: Add Allwinner SoC support
  pwm: atmel-hlcdc: Prevent division by zero
  pwm: atmel-hlcdc: Depend on HAVE_CLK

Pull dmaengine updates from Vinod Koul:
 "This update brings:

   - the big cleanup up by Maxime for device control and slave
     capabilities.  This makes the API much cleaner.

   - new IMG MDC driver by Andrew

   - new Renesas R-Car Gen2 DMA Controller driver by Laurent along with
     bunch of fixes on rcar drivers

   - odd fixes and updates spread over driver"

* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (130 commits)
  dmaengine: pl330: add DMA_PAUSE feature
  dmaengine: pl330: improve pl330_tx_status() function
  dmaengine: rcar-dmac: Disable channel 0 when using IOMMU
  dmaengine: rcar-dmac: Work around descriptor mode IOMMU errata
  dmaengine: rcar-dmac: Allocate hardware descriptors with DMAC device
  dmaengine: rcar-dmac: Fix oops due to unintialized list in error ISR
  dmaengine: rcar-dmac: Fix spinlock issues in interrupt
  dmaenegine: edma: fix sparse warnings
  dmaengine: rcar-dmac: Fix uninitialized variable usage
  dmaengine: shdmac: extend PM methods
  dmaengine: shdmac: use SET_RUNTIME_PM_OPS()
  dmaengine: pl330: fix bug that cause start the same descs in cyclic
  dmaengine: at_xdmac: allow muliple dwidths when doing slave transfers
  dmaengine: at_xdmac: simplify channel configuration stuff
  dmaengine: at_xdmac: introduce save_cc field
  dmaengine: at_xdmac: wait for in-progress transaction to complete after pausing a channel
  ioat: fail self-test if wait_for_completion times out
  dmaengine: dw: define DW_DMA_MAX_NR_MASTERS
  dmaengine: dw: amend description of dma_dev field
  dmatest: move src_off, dst_off, len inside loop
  ...

Pull watchdog updates from Wim Van Sebroeck:
 "This adds the following new drivers:

   - ImgTec PDC Watchdog Timer Driver,
   - Mediatek SoC integrated watchdog

  Add support for BCM5301X, IT8783, NCT6791 and NCT6792 WDT's

  Add bcm47xx_wdt and da9063 restart handlers and contains overall
  improvements and fixes"

* git://www.linux-watchdog.org/linux-watchdog:
  watchdog: bcm47xx_wdt.c: allow enabling on BCM5301X arch
  watchdog: jz4740: Add DT support
  dt: watchdog: Add DT binding documentation for jz4740 watchdog timer
  watchdog: dw_wdt: Try to get a 30 second watchdog by default
  watchdog: dw_wdt: pat the watchdog before enabling it
  watchdog: w83627hf_wdt: Add support for NCT6791 and NCT6792
  watchdog: bcm47xx_wdt.c: add restart handler support
  watchdog: gpio_wdt: Add "always_running" feature to GPIO watchdog
  watchdog: da9063: Add restart handler support
  ARM: mediatek: dts: Add bindings for watchdog
  watchdog: Add driver for Mediatek watchdog
  watchdog: Fix omap watchdogs to enable the magic close bit
  watchdog: rt2880_wdt: minor clean up
  watchdog: hpwdt: Fix initialization message in hpwdt.c
  watchdog: it87_wdt: add IT8783 ID
  watchdog: imx2: Constify struct regmap_config and watchdog_ops
  DT: watchdog: Add ImgTec PDC Watchdog Timer binding documentation
  watchdog: ImgTec PDC Watchdog Timer Driver

Pull fireware updates from Stefan Richter:
 "IEEE 1394 subsystem updates:

   - Replace made-up, unallocated Vendor and Model values of
     firewire-core's Configuration ROM register root directory by
     properly registered IDs.  (These IDs are visible to peer nodes on
     the bus and locally via sysfs, but they are not involved in
     protocol matching or driver matching, nor are they used in stock
     udev rules)

   - Remove some unneccessary code"

* tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: core: use correct vendor/model IDs
  firewire: sbp2: remove redundant check for bidi command
  firewire: ohci: Remove unused function