- 29 Apr, 2018 33 commits
-
-
Martin Schwidefsky authored
[ Upstream commit cf148998 ] To be able to switch off specific CPU alternatives with kernel parameters make a copy of the facility bit mask provided by STFLE and use the copy for the decision to apply an alternative. Reviewed-by:
David Hildenbrand <david@redhat.com> Reviewed-by:
Cornelia Huck <cohuck@redhat.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Martin Schwidefsky authored
[ Upstream commit e2dd8333 ] Add an optimized version of the array_index_mask_nospec function for s390 based on a compare and a subtract with borrow. Signed-off-by:
-
Martin Schwidefsky authored
[ Upstream commit 7041d281 ] Clear all user space registers on entry to the kernel and all KVM guest registers on KVM guest exit if the register does not contain either a parameter or a result value. Reviewed-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
-
Christian Borntraeger authored
[ Upstream commit 35b3fde6 ] The new firmware interfaces for branch prediction behaviour changes are transparently available for the guest. Nevertheless, there is new state attached that should be migrated and properly resetted. Provide a mechanism for handling reset, migration and VSIE. Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Heiko Carstens authored
[ Upstream commit 049a2c2d ] Remove the CPU_ALTERNATIVES config option and enable the code unconditionally. The config option was only added to avoid a conflict with the named saved segment support. Since that code is gone there is no reason to keep the CPU_ALTERNATIVES config option. Just enable it unconditionally to also reduce the number of config options and make it less likely that something breaks. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Vasily Gorbik authored
[ Upstream commit 686140a1 ] Implement CPU alternatives, which allows to optionally patch newer instructions at runtime, based on CPU facilities availability. A new kernel boot parameter "noaltinstr" disables patching. Current implementation is derived from x86 alternatives. Although ideal instructions padding (when altinstr is longer then oldinstr) is added at compile time, and no oldinstr nops optimization has to be done at runtime. Also couple of compile time sanity checks are done: 1. oldinstr and altinstr must be <= 254 bytes long, 2. oldinstr and altinstr must not have an odd length. alternative(oldinstr, altinstr, facility); alternative_2(oldinstr, altinstr1, facility1, altinstr2, facility2); Both compile time and runtime padding consists of either 6/4/2 bytes nop or a jump (brcl) + 2 bytes nop filler if padding is longer then 6 bytes. .altinstructions and .altinstr_replacement sections are part of __init_begin : __init_end region and are freed after initialization. Signed-off-by:
Vasily Gorbik <gor@linux.vnet.ibm.com> Signed-off-by:
-
Sinan Kaya authored
commit 821cdad5 upstream. Sporadic reset issues have been observed with an Intel 750 NVMe drive while assigning the physical function to the guest machine. The sequence of events observed is as follows: - perform a Function Level Reset (FLR) - sleep up to 1000ms total - read ~0 from PCI_COMMAND (CRS completion for config read) - warn that the device didn't return from FLR - touch the device before it's ready - device drops config writes when we restore register settings (there's no mechanism for software to learn about CRS completions for writes) - incomplete register restore leaves device in inconsistent state - device probe fails because device is in inconsistent state After reset, an endpoint may respond to config requests with Configuration Request Retry Status (CRS) to indicate that it is not ready to accept new requests. See PCIe r3.1, sec 2.3.1 and 6.6.2. Increase the timeout value from 1 second to 60 seconds to cover the period where device responds with CRS and also report polling progress. Signed-off-by:
Sinan Kaya <okaya@codeaurora.org> [bhelgaas: include the mandatory 100ms in the delays we print] Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Karthikeyan Periyasamy authored
commit 55cc11da upstream. This reverts commit 55884c04. When Ath10k is in AP mode and an unassociated STA sends a VHT action frame (Operating Mode Notification for the NSS change) periodically to AP this causes ath10k to call ath10k_station_assoc() which sends WMI_PEER_ASSOC_CMDID during NSS update. Over the time (with a certain client it can happen within 15 mins when there are over 500 of these VHT action frames) continuous calls of WMI_PEER_ASSOC_CMDID cause firmware to assert due to resource exhaust. To my knowledge setting WMI_PEER_NSS peer param itself enough to handle NSS updates and no need to call ath10k_station_assoc(). So revert the original commit from 2014 as it's unclear why the change was really needed. Now the firmware assert doesn't happen anymore. Issue observed in QCA9984 platform with firmware version:10.4-3.5.3-00053. This Change tested in QCA9984 with firmware version: 10.4-3.5.3-00053 and QCA988x platform with firmware version: 10.2.4-1.0-00036. Firmware Assert log: ath10k_pci 0002:01:00.0: firmware crashed! (guid e61f1274-9acd-4c5b-bcca-e032ea6e723c) ath10k_pci 0002:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe ath10k_pci 0002:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 1 testmode 1 ath10k_pci 0002:01:00.0: firmware ver 10.4-3.5.3-00053 api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast crc32 4c56a386 ath10k_pci 0002:01:00.0: board_file api 2 bmi_id 0:4 crc32 c2271344 ath10k_pci 0002:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal otp max-sta 512 raw 0 hwcrypto 1 ath10k_pci 0002:01:00.0: firmware register dump: ath10k_pci 0002:01:00.0: [00]: 0x0000000A 0x000015B3 0x00981E5F 0x00975B31 ath10k_pci 0002:01:00.0: [04]: 0x00981E5F 0x00060530 0x00000011 0x00446C60 ath10k_pci 0002:01:00.0: [08]: 0x0042F1FC 0x00458080 0x00000017 0x00000000 ath10k_pci 0002:01:00.0: [12]: 0x00000009 0x00000000 0x00973ABC 0x00973AD2 ath10k_pci 0002:01:00.0: [16]: 0x00973AB0 0x00960E62 0x009606CA 0x00000000 ath10k_pci 0002:01:00.0: [20]: 0x40981E5F 0x004066DC 0x00400000 0x00981E34 ath10k_pci 0002:01:00.0: [24]: 0x80983B48 0x0040673C 0x000000C0 0xC0981E5F ath10k_pci 0002:01:00.0: [28]: 0x80993DEB 0x0040676C 0x00431AB8 0x0045D0C4 ath10k_pci 0002:01:00.0: [32]: 0x80993E5C 0x004067AC 0x004303C0 0x0045D0C4 ath10k_pci 0002:01:00.0: [36]: 0x80994AAB 0x004067DC 0x00000000 0x0045D0C4 ath10k_pci 0002:01:00.0: [40]: 0x809971A0 0x0040681C 0x004303C0 0x00441B00 ath10k_pci 0002:01:00.0: [44]: 0x80991904 0x0040688C 0x004303C0 0x0045D0C4 ath10k_pci 0002:01:00.0: [48]: 0x80963AD3 0x00406A7C 0x004303C0 0x009918FC ath10k_pci 0002:01:00.0: [52]: 0x80960E80 0x00406A9C 0x0000001F 0x00400000 ath10k_pci 0002:01:00.0: [56]: 0x80960E51 0x00406ACC 0x00400000 0x00000000 ath10k_pci 0002:01:00.0: Copy Engine register dump: ath10k_pci 0002:01:00.0: index: addr: sr_wr_idx: sr_r_idx: dst_wr_idx: dst_r_idx: ath10k_pci 0002:01:00.0: [00]: 0x0004a000 15 15 3 3 ath10k_pci 0002:01:00.0: [01]: 0x0004a400 17 17 212 213 ath10k_pci 0002:01:00.0: [02]: 0x0004a800 21 21 20 21 ath10k_pci 0002:01:00.0: [03]: 0x0004ac00 25 25 27 25 ath10k_pci 0002:01:00.0: [04]: 0x0004b000 515 515 144 104 ath10k_pci 0002:01:00.0: [05]: 0x0004b400 28 28 155 156 ath10k_pci 0002:01:00.0: [06]: 0x0004b800 12 12 12 12 ath10k_pci 0002:01:00.0: [07]: 0x0004bc00 1 1 1 1 ath10k_pci 0002:01:00.0: [08]: 0x0004c000 0 0 127 0 ath10k_pci 0002:01:00.0: [09]: 0x0004c400 1 1 1 1 ath10k_pci 0002:01:00.0: [10]: 0x0004c800 0 0 0 0 ath10k_pci 0002:01:00.0: [11]: 0x0004cc00 0 0 0 0 ath10k_pci 0002:01:00.0: CE[1] write_index 212 sw_index 213 hw_index 0 nentries_mask 0x000001ff ath10k_pci 0002:01:00.0: CE[2] write_index 20 sw_index 21 hw_index 0 nentries_mask 0x0000007f ath10k_pci 0002:01:00.0: CE[5] write_index 155 sw_index 156 hw_index 0 nentries_mask 0x000001ff ath10k_pci 0002:01:00.0: DMA addr: nbytes: meta data: byte swap: gather: ath10k_pci 0002:01:00.0: [455]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [456]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [457]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [458]: 0x594a0038 0 0 0 1 ath10k_pci 0002:01:00.0: [459]: 0x580c0a42 0 0 0 0 ath10k_pci 0002:01:00.0: [460]: 0x594a0060 0 0 0 1 ath10k_pci 0002:01:00.0: [461]: 0x580c0c42 0 0 0 0 ath10k_pci 0002:01:00.0: [462]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [463]: 0x580c0c42 0 0 0 0 ath10k_pci 0002:01:00.0: [464]: 0x594a0038 0 0 0 1 ath10k_pci 0002:01:00.0: [465]: 0x580c0a42 0 0 0 0 ath10k_pci 0002:01:00.0: [466]: 0x594a0060 0 0 0 1 ath10k_pci 0002:01:00.0: [467]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [468]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [469]: 0x580c1c42 0 0 0 0 ath10k_pci 0002:01:00.0: [470]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [471]: 0x580c1c42 0 0 0 0 ath10k_pci 0002:01:00.0: [472]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [473]: 0x580c1c42 0 0 0 0 ath10k_pci 0002:01:00.0: [474]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [475]: 0x580c0642 0 0 0 0 ath10k_pci 0002:01:00.0: [476]: 0x594a0038 0 0 0 1 ath10k_pci 0002:01:00.0: [477]: 0x580c0842 0 0 0 0 ath10k_pci 0002:01:00.0: [478]: 0x594a0060 0 0 0 1 ath10k_pci 0002:01:00.0: [479]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [480]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [481]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [482]: 0x594a0038 0 0 0 1 ath10k_pci 0002:01:00.0: [483]: 0x580c0842 0 0 0 0 ath10k_pci 0002:01:00.0: [484]: 0x594a0060 0 0 0 1 ath10k_pci 0002:01:00.0: [485]: 0x580c0642 0 0 0 0 ath10k_pci 0002:01:00.0: [486]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [487]: 0x580c0642 0 0 0 0 ath10k_pci 0002:01:00.0: [488]: 0x594a0038 0 0 0 1 ath10k_pci 0002:01:00.0: [489]: 0x580c0842 0 0 0 0 ath10k_pci 0002:01:00.0: [490]: 0x594a0060 0 0 0 1 ath10k_pci 0002:01:00.0: [491]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [492]: 0x58174040 0 1 0 0 ath10k_pci 0002:01:00.0: [493]: 0x5a946040 0 1 0 0 ath10k_pci 0002:01:00.0: [494]: 0x59909040 0 1 0 0 ath10k_pci 0002:01:00.0: [495]: 0x5ae5a040 0 1 0 0 ath10k_pci 0002:01:00.0: [496]: 0x58096040 0 1 0 0 ath10k_pci 0002:01:00.0: [497]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [498]: 0x580c0642 0 0 0 0 ath10k_pci 0002:01:00.0: [499]: 0x5c1e0040 0 1 0 0 ath10k_pci 0002:01:00.0: [500]: 0x58153040 0 1 0 0 ath10k_pci 0002:01:00.0: [501]: 0x58129040 0 1 0 0 ath10k_pci 0002:01:00.0: [502]: 0x5952f040 0 1 0 0 ath10k_pci 0002:01:00.0: [503]: 0x59535040 0 1 0 0 ath10k_pci 0002:01:00.0: [504]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [505]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [506]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [507]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [508]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [509]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [510]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [511]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [512]: 0x5adcc040 0 1 0 0 ath10k_pci 0002:01:00.0: [513]: 0x5cf3d040 0 1 0 0 ath10k_pci 0002:01:00.0: [514]: 0x5c1e9040 64 1 0 0 ath10k_pci 0002:01:00.0: [515]: 0x00000000 0 0 0 0 Signed-off-by:
Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit f5a26acf Mike writes: It seems that commit f5a26acf ("pinctrl: intel: Initialize GPIO properly when used through irqchip") can cause problems on some Skylake systems with Sunrisepoint PCH-H. Namely on certain systems it may turn the backlight PWM pin from native mode to GPIO which makes the screen blank during boot. There is more information here: https://bugzilla.redhat.com/show_bug.cgi?id=1543769 The actual reason is that GPIO numbering used in BIOS is using "Windows" numbers meaning that they don't match the hardware 1:1 and because of this a wrong pin (backlight PWM) is picked and switched to GPIO mode. There is a proper fix for this but since it has quite many dependencies on commits that cannot be considered stable material, I suggest we revert commit f5a26acf from stable trees 4.9, 4.14 and 4.15 to prevent the backlight issue. Reported-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Fixes: f5a26acf ("pinctrl: intel: Initialize GPIO properly when used through irqchip") Cc: Daniel Drake <drake@endlessm.com> Cc: Chris Chiu <chiu@endlessm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Grant Grundler authored
commit 90841047 upstream. This linksys dongle by default comes up in cdc_ether mode. This patch allows r8152 to claim the device: Bus 002 Device 002: ID 13b1:0041 Linksys Signed-off-by:
Grant Grundler <grundler@chromium.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
David S. Miller <davem@davemloft.net> [krzk: Rebase on v4.4] Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Benjamin Beichler authored
commit 8cfd36a0 upstream. When destroying a net namespace, all hwsim interfaces, which are not created in default namespace are deleted. But the async deletion of the interfaces could last longer than the actual destruction of the namespace, which results to an use after free bug. Therefore use synchronous deletion in this case. Fixes: 100cb9ff ("mac80211_hwsim: Allow managing radios from non-initial namespaces") Reported-by: syzbot+70ce058e01259de7bb1d@syzkaller.appspotmail.com Signed-off-by:
Benjamin Beichler <benjamin.beichler@uni-rostock.de> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Imre Deak authored
commit 5e1df40f upstream. Currently we see sporadic timeouts during CDCLK changing both on BXT and GLK as reported by the Bugzilla: ticket. It's easy to reproduce this by changing the frequency in a tight loop after blanking the display. The upper bound for the completion time is 800us based on my tests, so increase it from the current 500us to 2ms; with that I couldn't trigger the problem either on BXT or GLK. Note that timeouts happened during both the change notification and the voltage level setting PCODE request. (For the latter one BSpec doesn't require us to wait for completion before further HW programming.) This issue is similar to commit 2c7d0602 ("drm/i915/gen9: Fix PCODE polling during CDCLK change notification") but there the PCODE request does complete (as shown by the mbox busy flag), only the reply we get from PCODE indicates a failure. So there we keep resending the request until a success reply, here we just have to increase the timeout for the one PCODE request we send. v2: - s/snb_pcode_request/sandybridge_pcode_write_timeout/ (Ville) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: <stable@vger.kernel.org> # v4.9 Acked-by: Chris Wilson <chris@chris-wilson.co.uk> (v1) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103326Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180130142939.17983-1-imre.deak@intel.com (cherry picked from commit e76019a8) Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> (Rebased for v4.9 stable tree due to upstream intel_cdclk.c, cdclk_state and pcu_lock change) Signed-off-by:
-
Leon Romanovsky authored
commit 75a45982 upstream. mlx5 modify_qp() relies on FW that the error will be thrown if wrong state is supplied. The missing check in FW causes the following crash while using XRC_TGT QPs. [ 14.769632] BUG: unable to handle kernel NULL pointer dereference at (null) [ 14.771085] IP: mlx5_ib_modify_qp+0xf60/0x13f0 [ 14.771894] PGD 800000001472e067 P4D 800000001472e067 PUD 14529067 PMD 0 [ 14.773126] Oops: 0002 [#1] SMP PTI [ 14.773763] CPU: 0 PID: 365 Comm: ubsan Not tainted 4.16.0-rc1-00038-g8151138c0793 #119 [ 14.775192] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 [ 14.777522] RIP: 0010:mlx5_ib_modify_qp+0xf60/0x13f0 [ 14.778417] RSP: 0018:ffffbf48001c7bd8 EFLAGS: 00010246 [ 14.779346] RAX: 0000000000000000 RBX: ffff9a8f9447d400 RCX: 0000000000000000 [ 14.780643] RDX: 0000000000000000 RSI: 000000000000000a RDI: 0000000000000000 [ 14.781930] RBP: 0000000000000000 R08: 00000000000217b0 R09: ffffffffbc9c1504 [ 14.783214] R10: fffff4a180519480 R11: ffff9a8f94523600 R12: ffff9a8f9493e240 [ 14.784507] R13: ffff9a8f9447d738 R14: 000000000000050a R15: 0000000000000000 [ 14.785800] FS: 00007f545b466700(0000) GS:ffff9a8f9fc00000(0000) knlGS:0000000000000000 [ 14.787073] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 14.787792] CR2: 0000000000000000 CR3: 00000000144be000 CR4: 00000000000006b0 [ 14.788689] Call Trace: [ 14.789007] _ib_modify_qp+0x71/0x120 [ 14.789475] modify_qp.isra.20+0x207/0x2f0 [ 14.790010] ib_uverbs_modify_qp+0x90/0xe0 [ 14.790532] ib_uverbs_write+0x1d2/0x3c0 [ 14.791049] ? __handle_mm_fault+0x93c/0xe40 [ 14.791644] __vfs_write+0x36/0x180 [ 14.792096] ? handle_mm_fault+0xc1/0x210 [ 14.792601] vfs_write+0xad/0x1e0 [ 14.793018] SyS_write+0x52/0xc0 [ 14.793422] do_syscall_64+0x75/0x180 [ 14.793888] entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 14.794527] RIP: 0033:0x7f545ad76099 [ 14.794975] RSP: 002b:00007ffd78787468 EFLAGS: 00000287 ORIG_RAX: 0000000000000001 [ 14.795958] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f545ad76099 [ 14.797075] RDX: 0000000000000078 RSI: 0000000020009000 RDI: 0000000000000003 [ 14.798140] RBP: 00007ffd78787470 R08: 00007ffd78787480 R09: 00007ffd78787480 [ 14.799207] R10: 00007ffd78787480 R11: 0000000000000287 R12: 00005599ada98760 [ 14.800277] R13: 00007ffd78787560 R14: 0000000000000000 R15: 0000000000000000 [ 14.801341] Code: 4c 8b 1c 24 48 8b 83 70 02 00 00 48 c7 83 cc 02 00 00 00 00 00 00 48 c7 83 24 03 00 00 00 00 00 00 c7 83 2c 03 00 00 00 00 00 00 <c7> 00 00 00 00 00 48 8b 83 70 02 00 00 c7 40 04 00 00 00 00 4c [ 14.804012] RIP: mlx5_ib_modify_qp+0xf60/0x13f0 RSP: ffffbf48001c7bd8 [ 14.804838] CR2: 0000000000000000 [ 14.805288] ---[ end trace 3f1da0df5c8b7c37 ]--- Cc: syzkaller <syzkaller@googlegroups.com> Reported-by:
Maor Gottlieb <maorg@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Jiri Olsa authored
commit 78b562fb upstream. Return immediately when we find issue in the user stack checks. The error value could get overwritten by following check for PERF_SAMPLE_REGS_INTR. Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: syzkaller-bugs@googlegroups.com Cc: x86@kernel.org Fixes: 60e2364e ("perf: Add ability to sample machine state on interrupt") Link: http://lkml.kernel.org/r/20180415092352.12403-1-jolsa@kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Jiri Olsa authored
commit 5af44ca5 upstream. The syzbot hit KASAN bug in perf_callchain_store having the entry stored behind the allocated bounds [1]. We miss the sample_max_stack check for the initial event that allocates callchain buffers. This missing check allows to create an event with sample_max_stack value bigger than the global sysctl maximum: # sysctl -a | grep perf_event_max_stack kernel.perf_event_max_stack = 127 # perf record -vv -C 1 -e cycles/max-stack=256/ kill ... perf_event_attr: size 112 ... sample_max_stack 256 ------------------------------------------------------------ sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0x8 = 4 Note the '-C 1', which forces perf record to create just single event. Otherwise it opens event for every cpu, then the sample_max_stack check fails on the second event and all's fine. The fix is to run the sample_max_stack check also for the first event with callchains. [1] https://marc.info/?l=linux-kernel&m=152352732920874&w=2 Reported-by: syzbot+7c449856228b63ac951e@syzkaller.appspotmail.com Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit e2d05499 which is commit 1d6b3c9b upstream. It breaks the build, so obviously none of us actually tested it :( Reported-by:
Maxime Hadjinlian <maxime.hadjinlian@gmail.com> Reported-by:
Akemi Yagi <toracat@elrepo.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Cc: kernel-team@lge.com Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
-
Sahitya Tummala authored
commit dbfcef6b upstream. Below is the synchronization issue between unmount and kjournald2 contexts, which results into use after free issue in kjournald2(). Fix this issue by using journal->j_state_lock to synchronize the wait_event() done in journal_kill_thread() and the wake_up() done in kjournald2(). TASK 1: umount cmd: |--jbd2_journal_destroy() { |--journal_kill_thread() { write_lock(&journal->j_state_lock); journal->j_flags |= JBD2_UNMOUNT; ... write_unlock(&journal->j_state_lock); wake_up(&journal->j_wait_commit); TASK 2 wakes up here: kjournald2() { ... checks JBD2_UNMOUNT flag and calls goto end-loop; ... end_loop: write_unlock(&journal->j_state_lock); journal->j_task = NULL; --> If this thread gets pre-empted here, then TASK 1 wait_event will exit even before this thread is completely done. wait_event(journal->j_wait_done_commit, journal->j_task == NULL); ... write_lock(&journal->j_state_lock); write_unlock(&journal->j_state_lock); } |--kfree(journal); } } wake_up(&journal->j_wait_done_commit); --> this step now results into use after free issue. } Signed-off-by:
Sahitya Tummala <stummala@codeaurora.org> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
Felix Fietkau authored
commit a34d0a0d upstream. In an RFC patch, Sven Eckelmann and Simon Wunderlich reported: "QCA 802.11n chips (especially AR9330/AR9340) sometimes end up in a state in which a read of AR_CFG always returns 0xdeadbeef. This should not happen when when the power_mode of the device is ATH9K_PM_AWAKE." Include the check for the default register state in the existing MAC hang check. Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
Kalle Valo <kvalo@qca.qualcomm.com> Cc: Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
Paul Burton authored
commit de96ec2a upstream. When allocating a struct alias_prop, of_alias_scan() only requested that it be aligned on a 4 byte boundary. The struct contains pointers which leads to us attempting 64 bit writes on 64 bit systems, and if the CPU doesn't support unaligned memory accesses then this causes problems - for example on some MIPS64r2 CPUs including the "mips64r2-generic" QEMU emulated CPU it will trigger an address error exception. Fix this by requesting alignment for the struct alias_prop allocation matching that which the compiler expects, using the __alignof__ keyword. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Acked-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Grant Likely <grant.likely@secretlab.ca> Cc: Frank Rowand <frowand.list@gmail.com> Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14306/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Cc: Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
Dan Carpenter authored
commit d08876f5 upstream. We pass an int pointer to stk_camera_read_reg() but only write to the highest byte. It's a bug on big endian systems and generally a nasty thing to do and doesn't match the write function either. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Cc: Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
Colin Ian King authored
commit a1b94355 upstream. acpi_match_device can potentially return NULL, so it is prudent to check if acpi_id is null before it is dereferenced. Add a check and an error message to indicate the failure. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
Pali Rohár <pali.rohar@gmail.com> Signed-off-by:
Sebastian Reichel <sre@kernel.org> Cc: Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
Dmitry Torokhov authored
commit 74c82dae upstream. We were accidentally initializing haptics->rated_voltage twice, and did not initialize overdrive voltage. Acked-by:
Dan Murphy <dmurphy@ti.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
Matt Redfearn authored
commit a3078e59 upstream. Big endian CPUs require SWAP_IO_SPACE enabled to swap accesses to little endian peripherals. Without this patch, big endian kernels fail to communicate with little endian periperals, such as PCI devices, on QEMU and FPGA based platforms. Signed-off-by:
Matt Redfearn <matt.redfearn@imgtec.com> Fixes: eed0eabd ("MIPS: generic: Introduce generic DT-based board support") Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15105/Signed-off-by:
-
Merlijn Wajer authored
commit 94e46a4f upstream. This fixes an oops on unbind / module unload (on the musb omap2430 platform). musb_remove function now calls musb_platform_exit before disabling runtime pm. Signed-off-by:
Merlijn Wajer <merlijn@wizzup.org> Signed-off-by:
Bin Liu <b-liu@ti.com> Signed-off-by:
-
Merlijn Wajer authored
commit df6b074d upstream. Without pm_runtime_{get,put}_sync calls in place, reading vbus status via /sys causes the following error: Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa0ab060 pgd = b333e822 [fa0ab060] *pgd=48011452(bad) [<c05261b0>] (musb_default_readb) from [<c0525bd0>] (musb_vbus_show+0x58/0xe4) [<c0525bd0>] (musb_vbus_show) from [<c04c0148>] (dev_attr_show+0x20/0x44) [<c04c0148>] (dev_attr_show) from [<c0259f74>] (sysfs_kf_seq_show+0x80/0xdc) [<c0259f74>] (sysfs_kf_seq_show) from [<c0210bac>] (seq_read+0x250/0x448) [<c0210bac>] (seq_read) from [<c01edb40>] (__vfs_read+0x1c/0x118) [<c01edb40>] (__vfs_read) from [<c01edccc>] (vfs_read+0x90/0x144) [<c01edccc>] (vfs_read) from [<c01ee1d0>] (SyS_read+0x3c/0x74) [<c01ee1d0>] (SyS_read) from [<c0106fe0>] (ret_fast_syscall+0x0/0x54) Solution was suggested by Tony Lindgren <tony@atomide.com>. Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Andreas Kemnade authored
commit 17539f2f upstream. On dm3730 there are enumeration problems after resume. Investigation led to the cause that the MUSB_POWER_SOFTCONN bit is not set. If it was set before suspend (because it was enabled via musb_pullup()), it is set in musb_restore_context() so the pullup is enabled. But then musb_start() is called which overwrites MUSB_POWER and therefore disables MUSB_POWER_SOFTCONN, so no pullup is enabled and the device is not enumerated. So let's do a subset of what musb_start() does in the same way as musb_suspend() does it. Platform-specific stuff it still called as there might be some phy-related stuff which needs to be enabled. Also interrupts are enabled, as it was the original idea of calling musb_start() in musb_resume() according to Commit 6fc6f4b8 ("usb: musb: Disable interrupts on suspend, enable them on resume") Signed-off-by:
Andreas Kemnade <andreas@kemnade.info> Tested-by:
-
Jean Delvare authored
commit f7f6d915 upstream. On some systems, the BIOS expects certain SMBus register values to match the hardware defaults. Restore these configuration registers at shutdown time to avoid confusing the BIOS. This avoids hard-locking such systems upon reboot. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Tested-by:
Jason Andryuk <jandryuk@gmail.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Cc: stable@vger.kernel.org Signed-off-by:
-
Jean Delvare authored
commit a086bb83 upstream. Saving the original value of register SMBSLVCMD in i801_enable_host_notify() doesn't work, because this function is called not only at probe time but also at resume time. Do it in i801_probe() instead, so that the saved value is not overwritten at resume time. Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by:
-
Benjamin Tissoires authored
commit 22e94bd6 upstream. Also do not override any other configuration in this register. Signed-off-by:
-
Imre Deak authored
commit 7eb2c4dd upstream. LSPCON adapters in low-power state may ignore the first I2C write during TMDS output buffer enabling, resulting in a blank screen even with an otherwise enabled pipe. Fix this by reading back and validating the written value a few times. The problem was noticed on GLK machines with an onboard LSPCON adapter after entering/exiting DC5 power state. Doing an I2C read of the adapter ID as the first transaction - instead of the I2C write to enable the TMDS buffers - returns the correct value. Based on this we assume that the transaction itself is sent properly, it's only the adapter that is not ready for some reason to accept this first write after waking from low-power state. In my case the second I2C write attempt always succeeded. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105854 Cc: Clinton Taylor <clinton.a.taylor@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180416155309.11100-1-imre.deak@intel.comSigned-off-by:
-
Daniel J Blueman authored
commit c0db1b67 upstream. During BO teardown, an indirect list 'uniform_addr_offsets' wasn't being freed leading to leaking many 128B allocations. Fix the memory leak by releasing it at teardown time. Cc: stable@vger.kernel.org Fixes: 6d45c81d ("drm/vc4: Add support for branching in shader validation.") Signed-off-by:
Daniel J Blueman <daniel@quora.org> Signed-off-by:
Eric Anholt <eric@anholt.net> Reviewed-by:
-
Xiaoming Gao authored
commit d3878e16 upstream. The TSC calibration code uses HPET as reference. The conversion normalizes the delta of two HPET timestamps: hpetref = ((tshpet1 - tshpet2) * HPET_PERIOD) / 1e6 and then divides the normalized delta of the corresponding TSC timestamps by the result to calulate the TSC frequency. tscfreq = ((tstsc1 - tstsc2 ) * 1e6) / hpetref This uses do_div() which takes an u32 as the divisor, which worked so far because the HPET frequency was low enough that 'hpetref' never exceeded 32bit. On Skylake machines the HPET frequency increased so 'hpetref' can exceed 32bit. do_div() truncates the divisor, which causes the calibration to fail. Use div64_u64() to avoid the problem. [ tglx: Fixes whitespace mangled patch and rewrote changelog ] Signed-off-by:
Xiaoming Gao <newtongao@tencent.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Cc: peterz@infradead.org Cc: hpa@zytor.com Link: https://lkml.kernel.org/r/38894564-4fc9-b8ec-353f-de702839e44e@gmail.comSigned-off-by:
-
Steve French authored
commit 1d0cffa6 upstream. RHBZ: 1453123 Since at least the 3.10 kernel and likely a lot earlier we have not been able to create unix domain sockets in a cifs share when mounted using the SFU mount option (except when mounted with the cifs unix extensions to Samba e.g.) Trying to create a socket, for example using the af_unix command from xfstests will cause : BUG: unable to handle kernel NULL pointer dereference at 00000000 00000040 Since no one uses or depends on being able to create unix domains sockets on a cifs share the easiest fix to stop this vulnerability is to simply not allow creation of any other special files than char or block devices when sfu is used. Added update to Ronnie's patch to handle a tcon link leak, and to address a buf leak noticed by Gustavo and Colin. Acked-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> CC: Colin Ian King <colin.king@canonical.com> Reviewed-by:
Pavel Shilovsky <pshilov@microsoft.com> Reported-by:
Eryu Guan <eguan@redhat.com> Signed-off-by:
Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by:
Steve French <smfrench@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
-
- 24 Apr, 2018 7 commits
-
-
Greg Kroah-Hartman authored
-
Wanpeng Li authored
commit 51d638b1 upstream. This can be triggered by hot-unplug one cpu. ====================================================== [ INFO: possible circular locking dependency detected ] 4.11.0+ #17 Not tainted ------------------------------------------------------- step_after_susp/2640 is trying to acquire lock: (all_q_mutex){+.+...}, at: [<ffffffffb33f95b8>] blk_mq_queue_reinit_work+0x18/0x110 but task is already holding lock: (cpu_hotplug.lock){+.+.+.}, at: [<ffffffffb306d04f>] cpu_hotplug_begin+0x7f/0xe0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (cpu_hotplug.lock){+.+.+.}: lock_acquire+0x11c/0x230 __mutex_lock+0x92/0x990 mutex_lock_nested+0x1b/0x20 get_online_cpus+0x64/0x80 blk_mq_init_allocated_queue+0x3a0/0x4e0 blk_mq_init_queue+0x3a/0x60 loop_add+0xe5/0x280 loop_init+0x124/0x177 do_one_initcall+0x53/0x1c0 kernel_init_freeable+0x1e3/0x27f kernel_init+0xe/0x100 ret_from_fork+0x31/0x40 -> #0 (all_q_mutex){+.+...}: __lock_acquire+0x189a/0x18a0 lock_acquire+0x11c/0x230 __mutex_lock+0x92/0x990 mutex_lock_nested+0x1b/0x20 blk_mq_queue_reinit_work+0x18/0x110 blk_mq_queue_reinit_dead+0x1c/0x20 cpuhp_invoke_callback+0x1f2/0x810 cpuhp_down_callbacks+0x42/0x80 _cpu_down+0xb2/0xe0 freeze_secondary_cpus+0xb6/0x390 suspend_devices_and_enter+0x3b3/0xa40 pm_suspend+0x129/0x490 state_store+0x82/0xf0 kobj_attr_store+0xf/0x20 sysfs_kf_write+0x45/0x60 kernfs_fop_write+0x135/0x1c0 __vfs_write+0x37/0x160 vfs_write+0xcd/0x1d0 SyS_write+0x58/0xc0 do_syscall_64+0x8f/0x710 return_from_SYSCALL_64+0x0/0x7a other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(cpu_hotplug.lock); lock(all_q_mutex); lock(cpu_hotplug.lock); lock(all_q_mutex); *** DEADLOCK *** 8 locks held by step_after_susp/2640: #0: (sb_writers#6){.+.+.+}, at: [<ffffffffb3244aed>] vfs_write+0x1ad/0x1d0 #1: (&of->mutex){+.+.+.}, at: [<ffffffffb32d3a51>] kernfs_fop_write+0x101/0x1c0 #2: (s_active#166){.+.+.+}, at: [<ffffffffb32d3a59>] kernfs_fop_write+0x109/0x1c0 #3: (pm_mutex){+.+...}, at: [<ffffffffb30d2ecd>] pm_suspend+0x21d/0x490 #4: (acpi_scan_lock){+.+.+.}, at: [<ffffffffb34dc3d7>] acpi_scan_lock_acquire+0x17/0x20 #5: (cpu_add_remove_lock){+.+.+.}, at: [<ffffffffb306d6d7>] freeze_secondary_cpus+0x27/0x390 #6: (cpu_hotplug.dep_map){++++++}, at: [<ffffffffb306cfd5>] cpu_hotplug_begin+0x5/0xe0 #7: (cpu_hotplug.lock){+.+.+.}, at: [<ffffffffb306d04f>] cpu_hotplug_begin+0x7f/0xe0 stack backtrace: CPU: 3 PID: 2640 Comm: step_after_susp Not tainted 4.11.0+ #17 Hardware name: Dell Inc. OptiPlex 7040/0JCTF8, BIOS 1.4.9 09/12/2016 Call Trace: dump_stack+0x99/0xce print_circular_bug+0x1fa/0x270 __lock_acquire+0x189a/0x18a0 lock_acquire+0x11c/0x230 ? lock_acquire+0x11c/0x230 ? blk_mq_queue_reinit_work+0x18/0x110 ? blk_mq_queue_reinit_work+0x18/0x110 __mutex_lock+0x92/0x990 ? blk_mq_queue_reinit_work+0x18/0x110 ? kmem_cache_free+0x2cb/0x330 ? anon_transport_class_unregister+0x20/0x20 ? blk_mq_queue_reinit_work+0x110/0x110 mutex_lock_nested+0x1b/0x20 ? mutex_lock_nested+0x1b/0x20 blk_mq_queue_reinit_work+0x18/0x110 blk_mq_queue_reinit_dead+0x1c/0x20 cpuhp_invoke_callback+0x1f2/0x810 ? __flow_cache_shrink+0x160/0x160 cpuhp_down_callbacks+0x42/0x80 _cpu_down+0xb2/0xe0 freeze_secondary_cpus+0xb6/0x390 suspend_devices_and_enter+0x3b3/0xa40 ? rcu_read_lock_sched_held+0x79/0x80 pm_suspend+0x129/0x490 state_store+0x82/0xf0 kobj_attr_store+0xf/0x20 sysfs_kf_write+0x45/0x60 kernfs_fop_write+0x135/0x1c0 __vfs_write+0x37/0x160 ? rcu_read_lock_sched_held+0x79/0x80 ? rcu_sync_lockdep_assert+0x2f/0x60 ? __sb_start_write+0xd9/0x1c0 ? vfs_write+0x1ad/0x1d0 vfs_write+0xcd/0x1d0 SyS_write+0x58/0xc0 ? rcu_read_lock_sched_held+0x79/0x80 do_syscall_64+0x8f/0x710 ? trace_hardirqs_on_thunk+0x1a/0x1c entry_SYSCALL64_slow_path+0x25/0x25 The cpu hotplug path will hold cpu_hotplug.lock and then reinit all exiting queues for blk mq w/ all_q_mutex, however, blk_mq_init_allocated_queue() will contend these two locks in the inversion order. This is due to commit eabe0659 (blk/mq: Cure cpu hotplug lock inversion), it fixes a cpu hotplug lock inversion issue because of hotplug rework, however the hotplug rework is still work-in-progress and lives in a -tip branch and mainline cannot yet trigger that splat. The commit breaks the linus's tree in the merge window, so this patch reverts the lock order and avoids to splat linus's tree. Cc: Jens Axboe <axboe@kernel.dk> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Cc: Thierry Escande <thierry.escande@linaro.org> Signed-off-by:
-
Greg Thelen authored
commit 2e898e4c upstream. lock_page_memcg()/unlock_page_memcg() use spin_lock_irqsave/restore() if the page's memcg is undergoing move accounting, which occurs when a process leaves its memcg for a new one that has memory.move_charge_at_immigrate set. unlocked_inode_to_wb_begin,end() use spin_lock_irq/spin_unlock_irq() if the given inode is switching writeback domains. Switches occur when enough writes are issued from a new domain. This existing pattern is thus suspicious: lock_page_memcg(page); unlocked_inode_to_wb_begin(inode, &locked); ... unlocked_inode_to_wb_end(inode, locked); unlock_page_memcg(page); If both inode switch and process memcg migration are both in-flight then unlocked_inode_to_wb_end() will unconditionally enable interrupts while still holding the lock_page_memcg() irq spinlock. This suggests the possibility of deadlock if an interrupt occurs before unlock_page_memcg(). truncate __cancel_dirty_page lock_page_memcg unlocked_inode_to_wb_begin unlocked_inode_to_wb_end <interrupts mistakenly enabled> <interrupt> end_page_writeback test_clear_page_writeback lock_page_memcg <deadlock> unlock_page_memcg Due to configuration limitations this deadlock is not currently possible because we don't mix cgroup writeback (a cgroupv2 feature) and memory.move_charge_at_immigrate (a cgroupv1 feature). If the kernel is hacked to always claim inode switching and memcg moving_account, then this script triggers lockup in less than a minute: cd /mnt/cgroup/memory mkdir a b echo 1 > a/memory.move_charge_at_immigrate echo 1 > b/memory.move_charge_at_immigrate ( echo $BASHPID > a/cgroup.procs while true; do dd if=/dev/zero of=/mnt/big bs=1M count=256 done ) & while true; do sync done & sleep 1h & SLEEP=$! while true; do echo $SLEEP > a/cgroup.procs echo $SLEEP > b/cgroup.procs done The deadlock does not seem possible, so it's debatable if there's any reason to modify the kernel. I suggest we should to prevent future surprises. And Wang Long said "this deadlock occurs three times in our environment", so there's more reason to apply this, even to stable. Stable 4.4 has minor conflicts applying this patch. For a clean 4.4 patch see "[PATCH for-4.4] writeback: safer lock nesting" https://lkml.org/lkml/2018/4/11/146 Wang Long said "this deadlock occurs three times in our environment" [gthelen@google.com: v4] Link: http://lkml.kernel.org/r/20180411084653.254724-1-gthelen@google.com [akpm@linux-foundation.org: comment tweaks, struct initialization simplification] Change-Id: Ibb773e8045852978f6207074491d262f1b3fb613 Link: http://lkml.kernel.org/r/20180410005908.167976-1-gthelen@google.com Fixes: 682aa8e1 ("writeback: implement unlocked_inode_to_wb transaction and use it for stat updates") Signed-off-by:
Greg Thelen <gthelen@google.com> Reported-by:
Wang Long <wanglong19@meituan.com> Acked-by:
Michal Hocko <mhocko@suse.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <tj@kernel.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: <stable@vger.kernel.org> [v4.2+] Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> [natechancellor: Adjust context due to lack of b93b0163] Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Amir Goldstein authored
commit 54a307ba upstream. When event on child inodes are sent to the parent inode mark and parent inode mark was not marked with FAN_EVENT_ON_CHILD, the event will not be delivered to the listener process. However, if the same process also has a mount mark, the event to the parent inode will be delivered regadless of the mount mark mask. This behavior is incorrect in the case where the mount mark mask does not contain the specific event type. For example, the process adds a mark on a directory with mask FAN_MODIFY (without FAN_EVENT_ON_CHILD) and a mount mark with mask FAN_CLOSE_NOWRITE (without FAN_ONDIR). A modify event on a file inside that directory (and inside that mount) should not create a FAN_MODIFY event, because neither of the marks requested to get that event on the file. Fixes: 1968f5ee ("fanotify: use both marks when possible") Cc: stable <stable@vger.kernel.org> Signed-off-by:
Amir Goldstein <amir73il@gmail.com> Signed-off-by:
Jan Kara <jack@suse.cz> [natechancellor: Fix small conflict due to lack of 3cd5eca8] Signed-off-by:
-
Matthew Wilcox authored
commit abc1be13 upstream. f2fs specifies the __GFP_ZERO flag for allocating some of its pages. Unfortunately, the page cache also uses the mapping's GFP flags for allocating radix tree nodes. It always masked off the __GFP_HIGHMEM flag, and masks off __GFP_ZERO in some paths, but not all. That causes radix tree nodes to be allocated with a NULL list_head, which causes backtraces like: __list_del_entry+0x30/0xd0 list_lru_del+0xac/0x1ac page_cache_tree_insert+0xd8/0x110 The __GFP_DMA and __GFP_DMA32 flags would also be able to sneak through if they are ever used. Fix them all by using GFP_RECLAIM_MASK at the innermost location, and remove it from earlier in the callchain. Link: http://lkml.kernel.org/r/20180411060320.14458-2-willy@infradead.org Fixes: 449dd698 ("mm: keep page cache radix tree nodes in check") Signed-off-by:
Matthew Wilcox <mawilcox@microsoft.com> Reported-by:
Chris Fries <cfries@google.com> Debugged-by:
Minchan Kim <minchan@kernel.org> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
-
Ian Kent authored
commit 1e630665 upstream. The autofs file system mkdir inode operation blindly sets the created directory mode to S_IFDIR | 0555, ingoring the passed in mode, which can cause selinux dac_override denials. But the function also checks if the caller is the daemon (as no-one else should be able to do anything here) so there's no point in not honouring the passed in mode, allowing the daemon to set appropriate mode when required. Link: http://lkml.kernel.org/r/152361593601.8051.14014139124905996173.stgit@pluto.themaw.netSigned-off-by:
Ian Kent <raven@themaw.net> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Al Viro authored
commit 16a34adb upstream. We want it only for the stuff created by SB_KERNMOUNT mounts, *not* for their copies. As it is, creating a deep stack of bindings of /proc/*/ns/* somewhere in a new namespace and exiting yields a stack overflow. Cc: stable@kernel.org Reported-by:
Alexander Aring <aring@mojatatu.com> Bisected-by:
Kirill Tkhai <ktkhai@virtuozzo.com> Tested-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
