drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c: In function ‘init_one’:
drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:4579:8: warning: ‘chip’ may be used uninitialized in this function [-Wmaybe-uninitialized]
   chip |= CHELSIO_CHIP_CODE(CHELSIO_T4, pl_rev);
        ^
drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:4571:11: note: ‘chip’ was declared here
  int ver, chip;
           ^

Fixes: d86bd29e ("cxgb4/cxgb4vf: read the correct bits of PL Who Am I register")
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

I've noticed  that fixed_phy_register() ignores its 'irq' parameter instead of
passing it to fixed_phy_add(). Luckily, fixed_phy_register()  seems to  always
be  called with PHY_POLL  for 'irq'... :-)

Fixes: a7595121 ("net: phy: extend fixed driver with fixed_phy_register()")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There's no particular desire to have conntrack action support in Open
vSwitch as an independently configurable bit, rather just to ensure
there is not a hard dependency. This exposed option doesn't accurately
reflect the conntrack dependency when enabled, so simplify this by
removing the option. Compile the support if NF_CONNTRACK is enabled.

Fixes: 7f8a436e ("openvswitch: Add conntrack action")
Signed-off-by: Joe Stringer <joestringer@nicira.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The Marvell 88E6171 switch is in the 88E6351 family, which supports
802.1Q, thus add support from the generic mv88e6xxx functions.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mac80211-for-davem-2015-09-04' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
For the first round of fixes, we have this:
 * fix for the sizeof() pointer type issue
 * a fix for regulatory getting into a restore loop
 * a fix for rfkill global 'all' state, it needs to be stored
   everywhere to apply correctly to new rfkill instances
 * properly refuse CQM RSSI when it cannot actually be used
 * protect HT TDLS traffic properly in non-HT networks
 * don't incorrectly advertise 80 MHz support when not allowed
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

If NO_DMA=y:

    ERROR: "dma_alloc_coherent" [drivers/net/ethernet/synopsys/dwc_eth_qos.ko] undefined!
    ERROR: "dma_free_coherent" [drivers/net/ethernet/synopsys/dwc_eth_qos.ko] undefined!
    ERROR: "dma_unmap_single" [drivers/net/ethernet/synopsys/dwc_eth_qos.ko] undefined!
    ERROR: "dma_map_page" [drivers/net/ethernet/synopsys/dwc_eth_qos.ko] undefined!
    ERROR: "dma_mapping_error" [drivers/net/ethernet/synopsys/dwc_eth_qos.ko] undefined!
    ERROR: "dma_map_single" [drivers/net/ethernet/synopsys/dwc_eth_qos.ko] undefined!
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Lars Persson <larper@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/vxlan.c: In function ‘vxlan_udp_encap_recv’:
drivers/net/vxlan.c:1226: warning: ‘info’ may be used uninitialized in this function

While this warning is a false positive, it can be killed easily by
getting rid of the pointer intermediary and referring directly to the
ip_tunnel_info structure.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/usb/lan78xx.c: In function ‘lan78xx_link_reset’:
net/usb/lan78xx.c:1107: warning: comparison is always false due to limited range of data type
net/usb/lan78xx.c:1111: warning: comparison is always false due to limited range of data type

Assigning return values that can be negative error codes to "u16"
variables makes them positive, ignoring the errors.  Hence use "int"
instead.

Drop the "unlikely"s (unlikely considered harmful) and propagate the
actual error values instead of overriding them to -EIO while we're at
it.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Only return a conn if the rds_conn_net(conn) matches the struct
net passed to rds_conn_lookup().

Fixes: 467fa153 ("RDS-TCP: Support multiple RDS-TCP listen endpoints,
       one per netns.")
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If fec MDIO write method succeeds its return value comes from
call to pm_runtime_get_sync().
But pm_runtime_get_sync() can also return 1.

In case of Micrel KSZ9031 PHY this value will then
be returned along the call chain of phy_write() ->
ksz9031_extended_write() -> ksz9031_center_flp_timing() ->
ksz9031_config_init() -> phy_init_hw() -> phy_attach_direct() ->
phy_connect_direct().

Then phy_connect() will cast it into a pointer using ERR_PTR(),
which then fec_enet_mii_probe() will try to dereference
resulting in an oops.

Fix it by normalizing return value of pm_runtime_get_sync()
to be zero if positive in MDIO write method.

Fixes: 8fff755e ("net: fec: Ensure clocks are enabled while using mdio bus")
Signed-off-by: Maciej Szmigiero <mail@maciej.szmigiero.name>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

switchdev_port_fdb_dump is used as .ndo_fdb_dump. Its return value is
idx, so we cannot return errval.

Fixes: 45d4122c ("switchdev: add support for fdb add/del/dump via switchdev_port_obj ops.")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Acked-by: Scott Feldman<sfeldma@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The be_cmd_rx_filter() routine sends a non-embedded cmd to the FW and used
a pre-allocated dma memory to hold the cmd payload. This worked fine when
this cmd was synchronous. This cmd was changed to asynchronous mode by the
commit 8af65c2f("make the RX_FILTER command asynchronous"). So now when
there are two quick invocations of this cmd, the 2nd request may end up
overwriting the first request, causing FW cmd corruption.

This patch reverts the offending commit and hence fixes the regression.

Fixes: 8af65c2f("be2net: make the RX_FILTER command asynchronous")
Signed-off-by: Sathya Perla <sathya.perla@avagotech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Conflicts:
	include/net/netfilter/nf_conntrack.h

The conflict was an overlap between changing the type of the zone
argument to nf_ct_tmpl_alloc() whilst exporting nf_ct_tmpl_free.

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net, they are:

1) Oneliner to restore maps in nf_tables since we support addressing registers
   at 32 bits level.

2) Restore previous default behaviour in bridge netfilter when CONFIG_IPV6=n,
   oneliner from Bernhard Thaler.

3) Out of bound access in ipset hash:net* set types, reported by Dave Jones'
   KASan utility, patch from Jozsef Kadlecsik.

4) Fix ipset compilation with gcc 4.4.7 related to C99 initialization of
   unnamed unions, patch from Elad Raz.

5) Add a workaround to address inconsistent endianess in the res_id field of
   nfnetlink batch messages, reported by Florian Westphal.

6) Fix error paths of CT/synproxy since the conntrack template was moved to use
   kmalloc, patch from Daniel Borkmann.

All of them look good to me to reach 4.2, I can route this to -stable myself
too, just let me know what you prefer.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

dev_get_by_name() will increment the usage count if the matching device
is found. But we were not decrementing the count if we have got the
device and the device is non-active.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the IPv6 multicast routing code the mrt_lock was not being released
correctly in the MFC iterator, as a result adding or deleting a MIF would
cause a hang because the mrt_lock could not be acquired.

This fix is a copy of the code for the IPv4 case and ensures that the lock
is released correctly.
Signed-off-by: Richard Laing <richard.laing@alliedtelesis.co.nz>
Acked-by: Cong Wang <cwang@twopensource.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When beacon filtering is enabled the mac80211 software implementation
for RSSI CQM cannot work as beacons will not be available. Rather than
accepting such a configuration without proper effect, reject it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Currently if 80MHz channels are not allowed for use, the VHT IE is not
included in the probe request for an AP. This is not good enough if the
AP is configured with the wrong regulatory and supports VHT even where
prohibited or in TDLS scenarios.
Mark the ifmgd with the DISABLE_VHT flag for the misbehaving-AP case, and
unset VHT support from the peer-station entry for the TDLS case.
Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

restore_regulatory_settings() should restore alpha2
as computed in restore_alpha2(), not raw user_alpha2 to
behave as described in the comment just above that code.

This fixes endless loop of calling CRDA for "00" and "97"
countries after resume from suspend on my laptop.

Looks like others had the same problem, too:
http://ath9k-devel.ath9k.narkive.com/knY5W6St/ath9k-and-crda-messages-in-logs
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/899335
https://forum.porteus.org/viewtopic.php?t=4975&p=36436
https://forums.opensuse.org/showthread.php/483356-Authentication-Regulatory-Domain-issues-ath5k-12-2Signed-off-by: Maciej Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

When switching the state of all RFKill switches of type all we need to
replicate the RFKILL_TYPE_ALL global state to all the other types global
state, so it is used to initialize persistent RFKill switches on
register.
Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

HT TDLS traffic should be protected in a non-HT BSS to avoid
collisions. Therefore, when TDLS peers join/leave, check if
protection is (now) needed and set the ht_operation_mode of
the virtual interface according to the HT capabilities of the
TDLS peer(s).

This works because a non-HT BSS connection never sets (or
otherwise uses) the ht_operation_mode; it just means that
drivers must be aware that this field applies to all HT
traffic for this virtual interface, not just the traffic
within the BSS. Document that.
Signed-off-by: Avri Altman <avri.altman@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

The rate_control_cap_mask() function takes a parameter mcs_mask, which
GCC will take to be u8 * even though it was declared with a fixed size.
This causes the following warning:

	net/mac80211/rate.c: In function 'rate_control_cap_mask':
	net/mac80211/rate.c:719:25: warning: 'sizeof' on array function parameter 'mcs_mask' will return size of 'u8 * {aka unsigned char *}' [-Wsizeof-array-argument]
	   for (i = 0; i < sizeof(mcs_mask); i++)
	                         ^
	net/mac80211/rate.c:684:10: note: declared here
	       u8 mcs_mask[IEEE80211_HT_MCS_MASK_LEN],
	          ^

This can be easily fixed by using the IEEE80211_HT_MCS_MASK_LEN directly
within the loop condition.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Marcelo Ricardo Leitner says:

====================
couple of sctp fixes for 0ca50d12

These are two fixes for sctp after my patch on 0ca50d12 ("sctp: fix
src address selection if using secondary addresses")

The first, fix a dst leak on those it decided to skip.

The second, adds the fallback on src selection that Vlad had asked
about. Unfortunatelly a lot of ipvs setups relies on the old behavior
and I don't see a better fix for it.

Please consider both to -stable tree.
====================
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 0ca50d12 added a restriction that the address must belong to
the output interface, so that sctp will use the right interface even
when using secondary addresses.

But it breaks IPVS setups, on which people is used to attach VIP
addresses to loopback interface on real servers. It's preferred to
attach to the interface actually in use, but it's a very common setup
and that used to work.

This patch then saves the first routing good result, even if it would be
going out through an interface that doesn't have that address. If no
better hit found, it's then used. This effectively restores the original
behavior if no better interface could be found.

Fixes: 0ca50d12 ("sctp: fix src address selection if using secondary addresses")
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 0ca50d12 failed to release the reference to dst entries that
it decided to skip.

Fixes: 0ca50d12 ("sctp: fix src address selection if using secondary addresses")
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tse_poll() calls __napi_complete() with irq enabled.  This leads napi
poll_list corruption and may stop all napi drivers working.
Use napi_complete() instead of __napi_complete().
Signed-off-by: Atsushi Nemoto <nemoto@toshiba-tops.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking updates from David Miller:
 "Another merge window, another set of networking changes.  I've heard
  rumblings that the lightweight tunnels infrastructure has been voted
  networking change of the year.  But what do I know?

   1) Add conntrack support to openvswitch, from Joe Stringer.

   2) Initial support for VRF (Virtual Routing and Forwarding), which
      allows the segmentation of routing paths without using multiple
      devices.  There are some semantic kinks to work out still, but
      this is a reasonably strong foundation.  From David Ahern.

   3) Remove spinlock fro act_bpf fast path, from Alexei Starovoitov.

   4) Ignore route nexthops with a link down state in ipv6, just like
      ipv4.  From Andy Gospodarek.

   5) Remove spinlock from fast path of act_gact and act_mirred, from
      Eric Dumazet.

   6) Document the DSA layer, from Florian Fainelli.

   7) Add netconsole support to bcmgenet, systemport, and DSA.  Also
      from Florian Fainelli.

   8) Add Mellanox Switch Driver and core infrastructure, from Jiri
      Pirko.

   9) Add support for "light weight tunnels", which allow for
      encapsulation and decapsulation without bearing the overhead of a
      full blown netdevice.  From Thomas Graf, Jiri Benc, and a cast of
      others.

  10) Add Identifier Locator Addressing support for ipv6, from Tom
      Herbert.

  11) Support fragmented SKBs in iwlwifi, from Johannes Berg.

  12) Allow perf PMUs to be accessed from eBPF programs, from Kaixu Xia.

  13) Add BQL support to 3c59x driver, from Loganaden Velvindron.

  14) Stop using a zero TX queue length to mean that a device shouldn't
      have a qdisc attached, use an explicit flag instead.  From Phil
      Sutter.

  15) Use generic geneve netdevice infrastructure in openvswitch, from
      Pravin B Shelar.

  16) Add infrastructure to avoid re-forwarding a packet in software
      that was already forwarded by a hardware switch.  From Scott
      Feldman.

  17) Allow AF_PACKET fanout function to be implemented in a bpf
      program, from Willem de Bruijn"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1458 commits)
  netfilter: nf_conntrack: make nf_ct_zone_dflt built-in
  netfilter: nf_dup{4, 6}: fix build error when nf_conntrack disabled
  net: fec: clear receive interrupts before processing a packet
  ipv6: fix exthdrs offload registration in out_rt path
  xen-netback: add support for multicast control
  bgmac: Update fixed_phy_register()
  sock, diag: fix panic in sock_diag_put_filterinfo
  flow_dissector: Use 'const' where possible.
  flow_dissector: Fix function argument ordering dependency
  ixgbe: Resolve "initialized field overwritten" warnings
  ixgbe: Remove bimodal SR-IOV disabling
  ixgbe: Add support for reporting 2.5G link speed
  ixgbe: fix bounds checking in ixgbe_setup_tc for 82598
  ixgbe: support for ethtool set_rxfh
  ixgbe: Avoid needless PHY access on copper phys
  ixgbe: cleanup to use cached mask value
  ixgbe: Remove second instance of lan_id variable
  ixgbe: use kzalloc for allocating one thing
  flow: Move __get_hash_from_flowi{4,6} into flow_dissector.c
  ixgbe: Remove unused PCI bus types
  ...

Pull device mapper update from Mike Snitzer:

 - a couple small cleanups in dm-cache, dm-verity, persistent-data's
   dm-btree, and DM core.

 - a 4.1-stable fix for dm-cache that fixes the leaking of deferred bio
   prison cells

 - a 4.2-stable fix that adds feature reporting for the dm-stats
   features added in 4.2

 - improve DM-snapshot to not invalidate the on-disk snapshot if
   snapshot device write overflow occurs; but a write overflow triggered
   through the origin device will still invalidate the snapshot.

 - optimize DM-thinp's async discard submission a bit now that late bio
   splitting has been included in block core.

 - switch DM-cache's SMQ policy lock from using a mutex to a spinlock;
   improves performance on very low latency devices (eg. NVMe SSD).

 - document DM RAID 4/5/6's discard support

[ I did not pull the slab changes, which weren't appropriate for this
  tree, and weren't obviously the right thing to do anyway.  At the very
  least they need some discussion and explanation before getting merged.

  Because not pulling the actual tagged commit but doing a partial pull
  instead, this merge commit thus also obviously is missing the git
  signature from the original tag ]

* tag 'dm-4.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm cache: fix use after freeing migrations
  dm cache: small cleanups related to deferred prison cell cleanup
  dm cache: fix leaking of deferred bio prison cells
  dm raid: document RAID 4/5/6 discard support
  dm stats: report precise_timestamps and histogram in @stats_list output
  dm thin: optimize async discard submission
  dm snapshot: don't invalidate on-disk image on snapshot write overflow
  dm: remove unlikely() before IS_ERR()
  dm: do not override error code returned from dm_get_device()
  dm: test return value for DM_MAPIO_SUBMITTED
  dm verity: remove unused mempool
  dm cache: move wake_waker() from free_migrations() to where it is needed
  dm btree remove: remove unused function get_nr_entries()
  dm btree: remove unused "dm_block_t root" parameter in btree_split_sibling()
  dm cache policy smq: change the mutex to a spinlock

Fengguang reported, that some randconfig generated the following linker
issue with nf_ct_zone_dflt object involved:

  [...]
  CC      init/version.o
  LD      init/built-in.o
  net/built-in.o: In function `ipv4_conntrack_defrag':
  nf_defrag_ipv4.c:(.text+0x93e95): undefined reference to `nf_ct_zone_dflt'
  net/built-in.o: In function `ipv6_defrag':
  nf_defrag_ipv6_hooks.c:(.text+0xe3ffe): undefined reference to `nf_ct_zone_dflt'
  make: *** [vmlinux] Error 1

Given that configurations exist where we have a built-in part, which is
accessing nf_ct_zone_dflt such as the two handlers nf_ct_defrag_user()
and nf_ct6_defrag_user(), and a part that configures nf_conntrack as a
module, we must move nf_ct_zone_dflt into a fixed, guaranteed built-in
area when netfilter is configured in general.

Therefore, split the more generic parts into a common header under
include/linux/netfilter/ and move nf_ct_zone_dflt into the built-in
section that already holds parts related to CONFIG_NF_CONNTRACK in the
netfilter core. This fixes the issue on my side.

Fixes: 308ac914 ("netfilter: nf_conntrack: push zone object into functions")
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

While testing various Kconfig options on another issue, I found that
the following one triggers as well on allmodconfig and nf_conntrack
disabled:

  net/ipv4/netfilter/nf_dup_ipv4.c: In function ‘nf_dup_ipv4’:
  net/ipv4/netfilter/nf_dup_ipv4.c:72:20: error: ‘nf_skb_duplicated’ undeclared (first use in this function)
    if (this_cpu_read(nf_skb_duplicated))
  [...]
  net/ipv6/netfilter/nf_dup_ipv6.c: In function ‘nf_dup_ipv6’:
  net/ipv6/netfilter/nf_dup_ipv6.c:66:20: error: ‘nf_skb_duplicated’ undeclared (first use in this function)
    if (this_cpu_read(nf_skb_duplicated))

Fix it by including directly the header where it is defined.

Fixes: bbde9fc1 ("netfilter: factor out packet duplication for IPv4/IPv6")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

The patch just to re-submit the patch "db3421c1" because the
patch "4d494cdc" remove the change.

Clear any pending receive interrupt before we process a pending packet.
This helps to avoid any spurious interrupts being raised after we have
fully cleaned the receive ring, while still allowing an interrupt to be
raised if we receive another packet.

The position of this is critical: we must do this prior to reading the
next packet status to avoid potentially dropping an interrupt when a
packet is still pending.
Acked-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

We previously register IPPROTO_ROUTING offload under inet6_add_offload(),
but in error path, we try to unregister it with inet_del_offload(). This
doesn't seem correct, it should actually be inet6_del_offload(), also
ipv6_exthdrs_offload_exit() from that commit seems rather incorrect (it
also uses rthdr_offload twice), but it got removed entirely later on.

Fixes: 3336288a ("ipv6: Switch to using new offload infrastructure.")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull SG updates from Jens Axboe:
 "This contains a set of scatter-gather related changes/fixes for 4.3:

   - Add support for limited chaining of sg tables even for
     architectures that do not set ARCH_HAS_SG_CHAIN.  From Christoph.

   - Add sg chain support to target_rd.  From Christoph.

   - Fixup open coded sg->page_link in crypto/omap-sham.  From
     Christoph.

   - Fixup open coded crypto ->page_link manipulation.  From Dan.

   - Also from Dan, automated fixup of manual sg_unmark_end()
     manipulations.

   - Also from Dan, automated fixup of open coded sg_phys()
     implementations.

   - From Robert Jarzmik, addition of an sg table splitting helper that
     drivers can use"

* 'for-4.3/sg' of git://git.kernel.dk/linux-block:
  lib: scatterlist: add sg splitting function
  scatterlist: use sg_phys()
  crypto/omap-sham: remove an open coded access to ->page_link
  scatterlist: remove open coded sg_unmark_end instances
  crypto: replace scatterwalk_sg_chain with sg_chain
  target/rd: always chain S/G list
  scatterlist: allow limited chaining without ARCH_HAS_SG_CHAIN

Pull block driver updates from Jens Axboe:
 "On top of the 4.3 core block IO changes, here are the driver related
  changes for 4.3.  Basically just NVMe and nbd this time around:

   - NVMe:
      - PRACT PI improvement from Alok Pandey.
      - Cleanups and improvements on submission queue doorbell and
        writing, using CMB if available.  From Jon Derrick.
      - From Keith, support for setting queue maximum segments, and
        reset support.
      - Also from Jon, fixup of u64 division issue on 32-bit archs and
        wiring up of the reset support through and ioctl.
      - Two small cleanups from Matias and Sunad

  - Various code cleanups and fixes from Markus Pargmann"

* 'for-4.3/drivers' of git://git.kernel.dk/linux-block:
  NVMe: Using PRACT bit to generate and verify PI by controller
  NVMe:Remove unreachable code in nvme_abort_req
  NVMe: Add nvme subsystem reset IOCTL
  NVMe: Add nvme subsystem reset support
  NVMe: removed unused nn var from nvme_dev_add
  NVMe: Set queue max segments
  nbd: flags is a u32 variable
  nbd: Rename functions for clearness of recv/send path
  nbd: Change 'disconnect' to be boolean
  nbd: Add debugfs entries
  nbd: Remove variable 'pid'
  nbd: Move clear queue debug message
  nbd: Remove 'harderror' and propagate error properly
  nbd: restructure sock_shutdown
  nbd: sock_shutdown, remove conditional lock
  nbd: Fix timeout detection
  nvme: Fixes u64 division which breaks i386 builds
  NVMe: Use CMB for the IO SQes if available
  NVMe: Unify SQ entry writing and doorbell ringing

Pull core block updates from Jens Axboe:
 "This first core part of the block IO changes contains:

   - Cleanup of the bio IO error signaling from Christoph.  We used to
     rely on the uptodate bit and passing around of an error, now we
     store the error in the bio itself.

   - Improvement of the above from myself, by shrinking the bio size
     down again to fit in two cachelines on x86-64.

   - Revert of the max_hw_sectors cap removal from a revision again,
     from Jeff Moyer.  This caused performance regressions in various
     tests.  Reinstate the limit, bump it to a more reasonable size
     instead.

   - Make /sys/block/<dev>/queue/discard_max_bytes writeable, by me.
     Most devices have huge trim limits, which can cause nasty latencies
     when deleting files.  Enable the admin to configure the size down.
     We will look into having a more sane default instead of UINT_MAX
     sectors.

   - Improvement of the SGP gaps logic from Keith Busch.

   - Enable the block core to handle arbitrarily sized bios, which
     enables a nice simplification of bio_add_page() (which is an IO hot
     path).  From Kent.

   - Improvements to the partition io stats accounting, making it
     faster.  From Ming Lei.

   - Also from Ming Lei, a basic fixup for overflow of the sysfs pending
     file in blk-mq, as well as a fix for a blk-mq timeout race
     condition.

   - Ming Lin has been carrying Kents above mentioned patches forward
     for a while, and testing them.  Ming also did a few fixes around
     that.

   - Sasha Levin found and fixed a use-after-free problem introduced by
     the bio->bi_error changes from Christoph.

   - Small blk cgroup cleanup from Viresh Kumar"

* 'for-4.3/core' of git://git.kernel.dk/linux-block: (26 commits)
  blk: Fix bio_io_vec index when checking bvec gaps
  block: Replace SG_GAPS with new queue limits mask
  block: bump BLK_DEF_MAX_SECTORS to 2560
  Revert "block: remove artifical max_hw_sectors cap"
  blk-mq: fix race between timeout and freeing request
  blk-mq: fix buffer overflow when reading sysfs file of 'pending'
  Documentation: update notes in biovecs about arbitrarily sized bios
  block: remove bio_get_nr_vecs()
  fs: use helper bio_add_page() instead of open coding on bi_io_vec
  block: kill merge_bvec_fn() completely
  md/raid5: get rid of bio_fits_rdev()
  md/raid5: split bio for chunk_aligned_read
  block: remove split code in blkdev_issue_{discard,write_same}
  btrfs: remove bio splitting and merge_bvec_fn() calls
  bcache: remove driver private bio splitting code
  block: simplify bio_add_page()
  block: make generic_make_request handle arbitrarily sized bios
  blk-cgroup: Drop unlikely before IS_ERR(_OR_NULL)
  block: don't access bio->bi_error after bio_put()
  block: shrink struct bio down to 2 cache lines again
  ...

Pull first round of SCSI updates from James Bottomley:
 "This includes one new driver: cxlflash plus the usual grab bag of
  updates for the major drivers: qla2xxx, ipr, storvsc, pm80xx, hptiop,
  plus a few assorted fixes.

  There's another tranch coming, but I want to incubate it another few
  days in the checkers, plus it includes a mpt2sas separated lifetime
  fix, which Avago won't get done testing until Friday"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (85 commits)
  aic94xx: set an error code on failure
  storvsc: Set the error code correctly in failure conditions
  storvsc: Allow write_same when host is windows 10
  storvsc: use storage protocol version to determine storage capabilities
  storvsc: use correct defaults for values determined by protocol negotiation
  storvsc: Untangle the storage protocol negotiation from the vmbus protocol negotiation.
  storvsc: Use a single value to track protocol versions
  storvsc: Rather than look for sets of specific protocol versions, make decisions based on ranges.
  cxlflash: Remove unused variable from queuecommand
  cxlflash: shift wrapping bug in afu_link_reset()
  cxlflash: off by one bug in cxlflash_show_port_status()
  cxlflash: Virtual LUN support
  cxlflash: Superpipe support
  cxlflash: Base error recovery support
  qla2xxx: Update driver version to 8.07.00.26-k
  qla2xxx: Add pci device id 0x2261.
  qla2xxx: Fix missing device login retries.
  qla2xxx: do not clear slot in outstanding cmd array
  qla2xxx: Remove decrement of sp reference count in abort handler.
  qla2xxx: Add support to show MPI and PEP FW version for ISP27xx.
  ...

Pull MTD updates from Brian Norris:
 "SPI NOR:
   - reduce virtual address space requirements for fsl-quadspi memory map
   - new fsl-quadspi IP support: imx6ul-qspi and imx7d-qspi
   - add new NOR flash device support
   - add new driver for NXP SPI Flash Interface (SPIFI)
   - stop abusing SPI API structs for non-SPI framework
   - fixup DT table matching for new "jedec,spi-nor" string

  NAND:
   - brcmnand: fix big endian MIPS macro usage
   - denali: refactor to use devres, dev_*() printing, etc.
   - OMAP ELM: change the module alias to actually be usable
   - pxa3xx_nand: fixup a few command sequencing issues -- both new and old
      - race conditions in the IRQ handler status clearing
      - problems when a bootloader left interrupts pending
      - config issues when overriding the bootloader configuration
   - new flash device support
   - sunxi_nand:
      - optimize timing configuration by calculation, rather than fixed
        fail-safe values
      - use EDO setting from ONFI
   - r852: fix compiler warnings
   - davinci: add 4KB page support

  Core:
   - oobtest: correct debug print information"

* tag 'for-linus-20150901' of git://git.infradead.org/linux-mtd: (42 commits)
  mtd: mtd_oobtest: Fix the address offset with vary_offset case
  mtd: blkdevs: fix switch-bool compilation warning
  mtd: spi-nor: stop (ab)using struct spi_device_id
  mtd: nand: add Toshiba TC58NVG0S3E to nand_ids table
  mtd: dataflash: Export OF module alias information
  nand: pxa3xx: Increase READ_ID buffer and make the size static
  mtd: nand: pxa3xx-nand: fix random command timeouts
  mtd: nand: pxa3xx_nand: fix early spurious interrupt
  mtd: pxa3xx_nand: add a default chunk size
  mtd: omap_elm: Fix module alias
  mtd: physmap_of: fix null pointer deference when kzalloc returns null
  mtd: nettel: do not ignore mtd_device_register() failure in nettel_init()
  mtd: denali_pci: switch to dev_err()
  mtd: denali_pci: refactor driver using devres API
  mtd: denali_pci: use module_pci_driver() macro
  mtd: denali: hide core part from user in Kconfig
  mtd: spi-nor: add Spansion S25FL204K support
  mtd: spi-nor: Improve Kconfig help text for SPI_FSL_QUADSPI
  mtd: spi-nor: add driver for NXP SPI Flash Interface (SPIFI)
  doc: dt: add documentation for nxp,lpc1773-spifi
  ...

Xen's PV network protocol includes messages to add/remove ethernet
multicast addresses to/from a filter list in the backend. This allows
the frontend to request the backend only forward multicast packets
which are of interest thus preventing unnecessary noise on the shared
ring.

The canonical netif header in git://xenbits.xen.org/xen.git specifies
the message format (two more XEN_NETIF_EXTRA_TYPEs) so the minimal
necessary changes have been pulled into include/xen/interface/io/netif.h.

To prevent the frontend from extending the multicast filter list
arbitrarily a limit (XEN_NETBK_MCAST_MAX) has been set to 64 entries.
This limit is not specified by the protocol and so may change in future.
If the limit is reached then the next XEN_NETIF_EXTRA_TYPE_MCAST_ADD
sent by the frontend will be failed with NETIF_RSP_ERROR.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit a5597008 ("phy: fixed_phy: Add gpio to determine link up/down.")
added a new argument to fixed_phy_register(), but missed to update bgmac
driver, causing the following build failure:

drivers/net/ethernet/broadcom/bgmac.c:1450:2: error: too few arguments to function 'fixed_phy_register'

Add the missing argument.
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diag socket's sock_diag_put_filterinfo() dumps classic BPF programs
upon request to user space (ss -0 -b). However, native eBPF programs
attached to sockets (SO_ATTACH_BPF) cannot be dumped with this method:

Their orig_prog is always NULL. However, sock_diag_put_filterinfo()
unconditionally tries to access its filter length resp. wants to copy
the filter insns from there. Internal cBPF to eBPF transformations
attached to sockets don't have this issue, as orig_prog state is kept.

It's currently only used by packet sockets. If we would want to add
native eBPF support in the future, this needs to be done through
a different attribute than PACKET_DIAG_FILTER to not confuse possible
user space disassemblers that work on diag data.

Fixes: 89aa0758 ("net: sock: allow eBPF programs to be attached to sockets")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull cgroup updates from Tejun Heo:

 - a new PIDs controller is added.  It turns out that PIDs are actually
   an independent resource from kmem due to the limited PID space.

 - more core preparations for the v2 interface.  Once cpu side interface
   is settled, it should be ready for lifting the devel mask.
   for-4.3-unified-base was temporarily branched so that other trees
   (block) can pull cgroup core changes that blkcg changes depend on.

 - a non-critical idr_preload usage bug fix.

* 'for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: pids: fix invalid get/put usage
  cgroup: introduce cgroup_subsys->legacy_name
  cgroup: don't print subsystems for the default hierarchy
  cgroup: make cftype->private a unsigned long
  cgroup: export cgrp_dfl_root
  cgroup: define controller file conventions
  cgroup: fix idr_preload usage
  cgroup: add documentation for the PIDs controller
  cgroup: implement the PIDs subsystem
  cgroup: allow a cgroup subsystem to reject a fork