- 19 May, 2022 2 commits
-
-
Greg Kroah-Hartman authored
Merge tag 'mhi-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-work-next Manivannan writes: MHI changes for v5.19 MHI Host -------- Support for new modems: - Foxconn Cinterion MV32-WA/MV32-WB based on SDX62/SDX65 - Telit FN980 v1 based on SDX55 - Telit FN990 based on SDX65 - Foxconn T99W373/T99W368 based on SDX62/SDX65 Core changes: - During the recycle of event ring elements, compute the ctxt_wp based on the local cached value instead of reading from shared memory. This is to prevent the possible corruption of the ctxt_wp as some of the endpoint devices could modify the value in shared memory. - Add sysfs support for resetting the endpoint based on the MHI spec. The MHI spec allows the host to hard reset the device in the case of an unrecoverable error and all other reset mechanisms have failed. - During MHI shutdown, wait for the endpoint device to enter the ready state post reset before proceeding. This is to avoid a possible race where host would remove the interrupt handler and device will send ready state interrupt, resulting in IOMMU fault. - Bail out updating the MHI register if the read has failed during read/modify/write. - Use mhi_write_reg() instead of mhi_write_reg_field() for writing the whole register fields in mhi_init_mmio(). MAINTAINERS change: - Since Qualcomm has moved the email domain for its employess from codeaurora domain to quicinc, update the same for Hemant. * tag 'mhi-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi: (29 commits) bus: mhi: host: Add support for Foxconn T99W373 and T99W368 bus: mhi: host: pci_generic: add Telit FN990 bus: mhi: host: pci_generic: add Telit FN980 v1 hardware revision bus: mhi: host: Add support for Cinterion MV32-WA/MV32-WB bus: mhi: host: Optimize and update MMIO register write method bus: mhi: host: Bail on writing register fields if read fails bus: mhi: host: Wait for ready state after reset bus: mhi: host: Add soc_reset sysfs bus: mhi: host: pci_generic: Sort mhi_pci_id_table based on the PID bus: mhi: host: Use cached values for calculating the shared write pointer MAINTAINERS: Update Hemant's email id bus: mhi: ep: Add uevent support for module autoloading bus: mhi: ep: Add support for suspending and resuming channels bus: mhi: ep: Add support for queueing SKBs to the host bus: mhi: ep: Add support for processing channel rings bus: mhi: ep: Add support for reading from the host bus: mhi: ep: Add support for processing command rings bus: mhi: ep: Add support for handling SYS_ERR condition bus: mhi: ep: Add support for handling MHI_RESET bus: mhi: ep: Add support for powering down the MHI endpoint stack ...
-
Greg Kroah-Hartman authored
Merge tag 'iio-for-5.19a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: First set of IIO new device support, features and cleanup for 5.19 Usual mixed bag. Stand out this time is Andy Shevchenko's continuing effort to move drivers over the generic firmware interfaces. Device support * sprd,sc2720 - upm9620 binding addition. - Refactor and support for sc2720, sc2721 and sc2730. * ti,ads1015 - Refactor driver and add support for TLA2024. Device support (IDs only) * invensense,mpu6050 - Add ID for ICM-20608-D. * st,accel: - Add ID for lis302dl. * st,lsm6dsx - Add support for ASM330LHHX (can fallback to LSM6DSR.) Features * convert drivers to device properties - IIO core - adi,ad7266 - adi,adis16480 - adi,adxl355 - bosch,bmi160 - domintech,dmard06 - fsl,fxas21002c - invensense,mpu3050 - linear,ltc2983 - linear,ltc2632 - maxbotix,mb1232 - maxim,max31856 - maxim,max31865 - multiplexer - ping - rescale - taos,tsl2772 * core - Add runtime check on whether realbits fit in storagebits for each channel. * adi,ad_sigma_delta - Add sequencer support and relevant update_scan_mode callbacks for adi,ad7192 and adi,ad7124. Cleanup and minor fixes * MAINTAINERS - Update Lorenzo Bianconi's email address for IIO drivers. - Add entry for ad3552r and update maintainer in dt-binding doc. * tree-wide - Replace strtobool() with kstrtobool(). - Drop false OF dependencies. * core - Tidy up and document IIO modes. - Take iio_buffer_enabled() out of header allowing current_mode to be moved to the opaque structure. - As all kfifo buffers use the same mode value, drop that parameter and set it unconditionally. - White space fixes and similar. - Drop use of list iterator variable for list_for_each_entry_continue_reverse and use list_prepare_entry to restart. * sysfs-trigger - Replace use of 'found' variable with dedicate list iterator variable. * adi,ad7124 - Drop misleading shift. * adi,ad2s1210 - Remove redundant local variable assignment. * adi,adis16480 - Use local device pointer to reduce repetition. - Improve handling of clocks. * domintech,dmard09 - White space. * dummy driver - Improve error handling. * fsl,mma8452 - Add missing documentation of name element. * invensense,mpu3050 - Stop remove() returning non 0. * kionix,kxsd9 - White space. * linear,ltc2688 - Use local variable for struct device. - Combine of_node_put() error handling paths. * linear,ltc2983 - Avoid use of constants in messages where a define is available. * microchip,mcp4131 - Fix compatible in dt example. * pni,rm3100 - Stop directly accessing iio_dev->current_mode just to find out if the buffer is enabled. * renesas,rzg2l - Relax kconfig constraint to include newer devices. * sprd,sc27xx - Fix wrong scaling mask. - Improve the calibration values. * samsung,ssp - Replace a 'found' variable in favor of an explicit value that was found. * sensortek,stk3xx - Add proximity-near-level binding and driver support. * st,st_sensors: - Drop unused accel_type enum. - Return early in *_write_raw() - Drop unnecessary locking in _avail functions. - Add local lock to protect odr against concurrent updates allowing mlock to no longer be used outside of the core. - Use iio_device_claim_direct_mode() rather than racy checking of the current mode. * st,stmpe-adc - Fix checks on wait_for_completion_timeout(). - Allow use of of_device_id for matching. * st,stm32-dfsdm - Stop accessing iio_dev->current_mode to find out if the buffer is enabled (so we can hide that variable in the opaque structure) * st,vl53l0x - Fix checks on wait_for_completion_timeout. * ti,ads1015 - Add missing ID for ti,ads1115 in binding doc. - Convert from repeated chip ID look up to selecting static const data. - Switch to read_avail() callback. * ti,ads8688 - Use of_device_id for driver matching. * ti,palmas-adc - Drop a warning on minor calibration mismatch leading to slightly negative values after applying the calibration. * tag 'iio-for-5.19a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (95 commits) iio: ti-ads8688: use of_device_id for OF matching iio: stmpe-adc: use of_device_id for OF matching dt-bindings: iio: Fix incorrect compatible strings in examples iio: gyro: mpu3050: Make mpu3050_common_remove() return void iio: dac: ltc2632: Make use of device properties iio: temperature: max31865: Make use of device properties iio: proximity: mb1232: Switch to use fwnode_irq_get() iio: imu: adis16480: Improve getting the optional clocks iio: imu: adis16480: Use temporary variable for struct device iio: imu: adis16480: Make use of device properties staging: iio: ad2s1210: remove redundant assignment to variable negative iio: adc: sc27xx: add support for PMIC sc2730 iio: adc: sc27xx: add support for PMIC sc2720 and sc2721 iio: adc: sc27xx: refactor some functions for support more PMiCs iio: adc: sc27xx: structure adjustment and optimization iio: adc: sc27xx: Fine tune the scale calibration values iio: adc: sc27xx: fix read big scale voltage not right dt-bindings:iio:adc: add sprd,ump9620-adc dt-binding iio: proximity: stk3310: Export near level property for proximity sensor dt-bindings: iio: light: stk33xx: Add proximity-near-level ...
-
- 10 May, 2022 3 commits
-
-
Slark Xiao authored
Product's enumeration align with previous Foxconn SDX55, so T99W373(SDX62)/T99W368(SDX65) would use the same config as Foxconn SDX55. Remove fw and edl for this new commit. Signed-off-by:
Slark Xiao <slark_xiao@163.com> Reviewed-by:
Manivannan Sadhasivam <mani@kernel.org> Reviewed-by:
Loic Poulain <loic.poulain@linaro.org> Link: https://lore.kernel.org/r/20220503024349.4486-1-slark_xiao@163.comSigned-off-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
-
Daniele Palmas authored
Add Telit FN990: 01:00.0 Unassigned class [ff00]: Qualcomm Device 0308 Subsystem: Device 1c5d:2010 Signed-off-by:Daniele Palmas <dnlplm@gmail.com> Reviewed-by:
-
Daniele Palmas authored
Add Telit FN980 v1 hardware revision: 01:00.0 Unassigned class [ff00]: Qualcomm Device [17cb:0306] Subsystem: Device [1c5d:2000] Signed-off-by:
-
- 09 May, 2022 24 commits
-
-
Sean Anderson authored
This adds support for Trust Architecture (TA) 2.1 devices to the SFP driver. There are few differences between TA 2.1 and TA 3.0, especially for read-only support, so just re-use the existing data. Signed-off-by:
Sean Anderson <sean.anderson@seco.com> Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220429162701.2222-17-srinivas.kandagatla@linaro.orgSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sean Anderson authored
This converts the SFP driver to use regmap. This will allow easily supporting devices with different endians. We disallow byte-level access, as regmap_bulk_read doesn't support it (and it's unclear what the correct result would be when we have an endianness difference). Signed-off-by:
-
Sean Anderson authored
Trust Architecture (TA) 2.1 devices include the LS1012A, LS1021A, LS1043A, and LS1046A. The SFP device on TA 2.1 devices is very similar to the SFP on TA 3.0 devices. The primary difference is a few fields in the control register. Add a compatible string. Signed-off-by:
-
Sean Anderson authored
The TA_PROG_SFP supply must be enabled to program the fuses, and disabled to read the fuses (such as at power-on-reset). On many boards, this supply is controlled by a jumper. The user must manually insert or remove it at the appropriate time in the programming process. However, on other boards this supply is controlled by an FPGA or a GPIO. In these cases, the driver can automatically enable and disable it as necessary. Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Sean Anderson authored
To program fuses, it is necessary to set the fuse programming time. This is determined based on the value of the platform clock. Add a clock property. Because this property is necessary for programming, it is made mandatory. Since these bindings have not yet been present in a stable release (though they are on track for 5.18), it is not an ABI break to change them in this manner. Signed-off-by:
-
Sean Anderson authored
There is a small grammatical error in the description. Fix it. Reviewed-by:
Michael Walle <michael@walle.cc> Reviewed-by:
-
Minghao Chi authored
Using pm_runtime_resume_and_get is more appropriate for simplifing code Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Minghao Chi <chi.minghao@zte.com.cn> Signed-off-by:
-
Sven Peter authored
Apple SoCs contain eFuses used to store factory-programmed data such as calibration values for the PCIe or the Type-C PHY. They are organized as 32bit values exposed as MMIO. Signed-off-by:
Sven Peter <sven@svenpeter.dev> Signed-off-by:
-
Sven Peter authored
Apple SoCs come with eFuses used to store factory-programmed data such as calibration settings for the PCIe and Type-C PHY. Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Sven Peter authored
Signed-off-by:
-
Rafał Miłecki authored
DT binding for Broadcom's NVRAM supports specifying NVMEM cells as NVMEM device (provider) subnodes. Look for such subnodes when collecing NVMEM cells. This allows NVMEM consumers to use NVRAM variables. Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Signed-off-by:
-
Rafał Miłecki authored
Some hardware may have NVMEM cells described in Device Tree using individual nodes. Let drivers pass such nodes to the NVMEM subsystem so they can be later used by NVMEM consumers. Signed-off-by:
-
Carlos Llamas authored
Log readable and specific error messages whenever a transaction failure happens. This will ensure better context is given to regular users about these unique error cases, without having to decode a cryptic log. Acked-by:
Todd Kjos <tkjos@google.com> Acked-by:
Christian Brauner (Microsoft) <brauner@kernel.org> Signed-off-by:
Carlos Llamas <cmllamas@google.com> Link: https://lore.kernel.org/r/20220429235644.697372-6-cmllamas@google.comSigned-off-by:
-
Carlos Llamas authored
Converting binder_debug() and binder_user_error() macros into functions reduces the overall object size by 16936 bytes when cross-compiled with aarch64-linux-gnu-gcc 11.2.0: $ size drivers/android/binder.o.{old,new} text data bss dec hex filename 77935 6168 20264 104367 197af drivers/android/binder.o.old 65551 1616 20264 87431 15587 drivers/android/binder.o.new This is particularly beneficial to functions binder_transaction() and binder_thread_write() which repeatedly use these macros and are both part of the critical path for all binder transactions. $ nm --size vmlinux.{old,new} |grep ' binder_transaction$' 0000000000002f60 t binder_transaction 0000000000002358 t binder_transaction $ nm --size vmlinux.{old,new} |grep binder_thread_write 0000000000001c54 t binder_thread_write 00000000000014a8 t binder_thread_write Acked-by: -
Carlos Llamas authored
Add extended_error to the binderfs feature list, to help userspace determine whether the BINDER_GET_EXTENDED_ERROR ioctl is supported by the binder driver. Reviewed-by:
-
Carlos Llamas authored
Provide a userspace mechanism to pull precise error information upon failed operations. Extending the current error codes returned by the interfaces allows userspace to better determine the course of action. This could be for instance, retrying a failed transaction at a later point and thus offloading the error handling from the driver. Acked-by:
-
Carlos Llamas authored
Make sure we log relevant information about failed transactions such as the target proc/thread, call type and transaction id. These details are particularly important when debugging userspace issues. Acked-by:
-
Matthew Gerlach authored
Add the Device Feature List (DFL) feature id for the High Speed Serial Interface (HSSI) Subsystem to the table of ids supported by the uio_dfl driver. The HSSI Subsystem is a configurable set of IP blocks to be used as part of a Ethernet or PCS/FEC/PMA pipeline. Like the Ethernet group used by the N3000 card, the HSSI Subsystem does not fully implement a network device from a Linux netdev perspective and is controlled and monitored from user space software via the uio interface. The Feature ID table of DFL can be found: https://github.com/OPAE/dfl-feature-idReviewed-by:
Tom Rix <trix@redhat.com> Acked-by:
Xu Yilun <yilun.xu@intel.com> Signed-off-by:
Matthew Gerlach <matthew.gerlach@linux.intel.com> Signed-off-by:
Tianfei Zhang <tianfei.zhang@intel.com> Link: https://lore.kernel.org/r/20220505094129.686535-1-tianfei.zhang@intel.comSigned-off-by:
-
Lad Prabhakar authored
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). Tested-By:
Steev Klimaszewski <steev@kali.org> Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by:
-
Wan Jiabing authored
Fix following coccicheck warning: ./drivers/bus/mhi/host/init.c:89:8-16: WARNING: use scnprintf or sprintf Use sysfs_emit and sysfs_emit_at instead of snprintf. Reviewed-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
Wan Jiabing <wanjiabing@vivo.com> Link: https://lore.kernel.org/r/20220426125902.681258-1-wanjiabing@vivo.comSigned-off-by:
-
Kees Cook authored
The masking for PAC bits wasn't handling 32-bit architectures correctly. Replace the u64 cast with uintptr_t. Link: https://lore.kernel.org/lkml/CAMuHMdVz-J-1ZQ08u0bsQihDkcRmEPrtX5B_oRJ+Ns5jrasnUw@mail.gmail.com Fixes: 2e53b877 ("lkdtm: Add CFI_BACKWARD to test ROP mitigations") Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Tested-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Shuah Khan authored
rtsx_usb_probe() doesn't call usb_set_intfdata() to null out the interface pointer when probe fails. This leaves a stale pointer. Noticed the missing usb_set_intfdata() while debugging an unrelated invalid DMA mapping problem. Fix it with a call to usb_set_intfdata(..., NULL). Signed-off-by:
Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20220429210913.46804-1-skhan@linuxfoundation.orgSigned-off-by:
-
Jiapeng Chong authored
Clean the following coccicheck warning: ./drivers/misc/altera-stapl/altera.c:955:51-52: WARNING opportunity for swap(). Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Link: https://lore.kernel.org/r/20220505081539.91575-1-jiapeng.chong@linux.alibaba.comSigned-off-by:
-
Ricky WU authored
move rts5261_fetch_vendor_settings() to rts5261_init_from_hw() make sure it be called from S3 or D3 add more register setting when efuse is set read efuse setting to register on init flow Signed-off-by:
Ricky Wu <Ricky_wu@realtek.com> Link: https://lore.kernel.org/r/18101ecb0f0749ccb9f564eda171ba40@realtek.comSigned-off-by:
-
- 02 May, 2022 1 commit
-
-
Greg Kroah-Hartman authored
We need the char-misc fixes in here as well. Signed-off-by:
-
- 01 May, 2022 9 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Paolo Bonzini: "ARM: - Take care of faults occuring between the PARange and IPA range by injecting an exception - Fix S2 faults taken from a host EL0 in protected mode - Work around Oops caused by a PMU access from a 32bit guest when PMU has been created. This is a temporary bodge until we fix it for good. x86: - Fix potential races when walking host page table - Fix shadow page table leak when KVM runs nested - Work around bug in userspace when KVM synthesizes leaf 0x80000021 on older (pre-EPYC) or Intel processors Generic (but affects only RISC-V): - Fix bad user ABI for KVM_EXIT_SYSTEM_EVENT" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: work around QEMU issue with synthetic CPUID leaves Revert "x86/mm: Introduce lookup_address_in_mm()" KVM: x86/mmu: fix potential races when walking host page table KVM: fix bad user ABI for KVM_EXIT_SYSTEM_EVENT KVM: x86/mmu: Do not create SPTEs for GFNs that exceed host.MAXPHYADDR KVM: arm64: Inject exception on out-of-IPA-range translation fault KVM/arm64: Don't emulate a PMU for 32-bit guests if feature not set KVM: arm64: Handle host stage-2 faults from 32-bit EL0 -
Krzysztof Kozlowski authored
The of_device_id was added to allow module autoloading, but it should be also used to allow driver matching via Devicetree. This also fixes W=1 warning: drivers/iio/adc/ti-ads8688.c:501:34: error: ‘ads8688_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220501103447.111392-2-krzysztof.kozlowski@linaro.orgSigned-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Krzysztof Kozlowski authored
The of_device_id was added to allow module autoloading, but it should be also used to allow driver matching via Devicetree. This also fixes W=1 warning: drivers/iio/adc/stmpe-adc.c:357:34: error: ‘stmpe_adc_ids’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Rob Herring authored
Fix a couple of examples using incorrect compatible strings. Signed-off-by:
Slawomir Stepien <sst@poczta.fm> Reviewed-by:
-
Uwe Kleine-König authored
This function (up to now) returns zero unconditionally, so there isn't any benefit of returning a value. Make it return void to be able to see at a glance that the return value of mpu3050_i2c_remove is always zero. This patch is a preparation for making i2c remove callbacks return void. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220425191735.59032-1-u.kleine-koenig@pengutronix.deSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Borislav Petkov: - A fix to disable PCI/MSI[-X] masking for XEN_HVM guests as that is solely controlled by the hypervisor - A build fix to make the function prototype (__warn()) as visible as the definition itself - A bunch of objtool annotation fixes which have accumulated over time - An ORC unwinder fix to handle bad input gracefully - Well, we thought the microcode gets loaded in time in order to restore the microcode-emulated MSRs but we thought wrong. So there's a fix for that to have the ordering done properly - Add new Intel model numbers - A spelling fix * tag 'x86_urgent_for_v5.18_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/pci/xen: Disable PCI/MSI[-X] masking for XEN_HVM guests bug: Have __warn() prototype defined unconditionally x86/Kconfig: fix the spelling of 'becoming' in X86_KERNEL_IBT config objtool: Use offstr() to print address of missing ENDBR objtool: Print data address for "!ENDBR" data warnings x86/xen: Add ANNOTATE_NOENDBR to startup_xen() x86/uaccess: Add ENDBR to __put_user_nocheck*() x86/retpoline: Add ANNOTATE_NOENDBR for retpolines x86/static_call: Add ANNOTATE_NOENDBR to static call trampoline objtool: Enable unreachable warnings for CLANG LTO x86,objtool: Explicitly mark idtentry_body()s tail REACHABLE x86,objtool: Mark cpu_startup_entry() __noreturn x86,xen,objtool: Add UNWIND hint lib/strn*,objtool: Enforce user_access_begin() rules MAINTAINERS: Add x86 unwinding entry x86/unwind/orc: Recheck address range after stack info was updated x86/cpu: Load microcode during restore_processor_state() x86/cpu: Add new Alderlake and Raptorlake CPU model numbers
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull objtool fixes from Borislav Petkov: "A bunch of objtool fixes to improve unwinding, sibling call detection, fallthrough detection and relocation handling of weak symbols when the toolchain strips section symbols" * tag 'objtool_urgent_for_v5.18_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix code relocs vs weak symbols objtool: Fix type of reloc::addend objtool: Fix function fallthrough detection for vmlinux objtool: Fix sibling call detection in alternatives objtool: Don't set 'jump_dest' for sibling calls x86/uaccess: Don't jump between functions
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fix from Borislav Petkov: - Fix locking when accessing device MSI descriptors * tag 'irq_urgent_for_v5.18_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: bus: fsl-mc-msi: Fix MSI descriptor mutex lock for msi_first_desc()
-
- 30 Apr, 2022 1 commit
-
-
Linus Torvalds authored
Merge tag 'driver-core-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are some small driver core and kernfs fixes for some reported problems. They include: - kernfs regression that is causing oopses in 5.17 and newer releases - topology sysfs fixes for a few small reported problems. All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: kernfs: fix NULL dereferencing in kernfs_remove topology: Fix up build warning in topology_is_visible() arch_topology: Do not set llc_sibling if llc_id is invalid topology: make core_mask include at least cluster_siblings topology/sysfs: Hide PPIN on systems that do not support it.
-
