- 01 Feb, 2016 27 commits
-
-
Felix Kuehling authored
[ Upstream commit 42ef344c ] eoffset is sometimes treated as the last address inside the address range, and sometimes as the first address outside the range. This was resulting in errors when a test filled up the entire address space. Make it consistent to always be the last address within the range. Also fixed related errors when checking the VA limit and in radeon_vm_fence_pts. Signed-off-by:
Felix.Kuehling <Felix.Kuehling@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
Sasha Levin <sasha.levin@oracle.com>
-
Mathieu Poirier authored
[ Upstream commit fadf3a44 ] Connection child names associated to ports can sometimes be NULL, which is the case when booting a system on QEMU or when the Coresight power domain isn't switched on. This patch is adding a check to make sure a NULL string isn't fed to strcmp(), something that avoid crashing the system. Cc: <stable@vger.kernel.org> # v3.18+ Reported-by:
Tyler Baker <tyler.baker@linaro.org> Signed-off-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Lorenzo Pieralisi authored
[ Upstream commit d2d39a3b ] commit 60792ad3 upstream. The pmuserenr_el0 register value is architecturally UNKNOWN on reset. Current kernel code resets that register value iff the core pmu device is correctly probed in the kernel. On platforms with missing DT pmu nodes (or disabled perf events in the kernel), the pmu is not probed, therefore the pmuserenr_el0 register is not reset in the kernel, which means that its value retains the reset value that is architecturally UNKNOWN (system may run with eg pmuserenr_el0 == 0x1, which means that PMU counters access is available at EL0, which must be disallowed). This patch adds code that resets pmuserenr_el0 on cold boot and restores it on core resume from shutdown, so that the pmuserenr_el0 setup is always enforced in the kernel. Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Will Deacon authored
[ Upstream commit d8d23fa0 ] We don't want to expose the DCC to userspace, particularly as there is a kernel console driver for it. This patch resets mdscr_el1 to disable userspace access to the DCC registers on the cold boot path. Signed-off-by:
-
Thomas Gleixner authored
[ Upstream commit fb75a428 ] If the proxy lock in the requeue loop acquires the rtmutex for a waiter then it acquired also refcount on the pi_state related to the futex, but the waiter side does not drop the reference count. Add the missing free_pi_state() call. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Darren Hart <darren@dvhart.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Bhuvanesh_Surachari@mentor.com Cc: Andy Lowe <Andy_Lowe@mentor.com> Link: http://lkml.kernel.org/r/20151219200607.178132067@linutronix.deSigned-off-by:
-
Slava Grigorev authored
[ Upstream commit ac4a9350 ] DP audio is derived from the dfs clock. Signed-off-by:
Slava Grigorev <slava.grigorev@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Nikolay Borisov authored
[ Upstream commit 18d03e8c ] When a thin pool is being destroyed delayed work items are cancelled using cancel_delayed_work(), which doesn't guarantee that on return the delayed item isn't running. This can cause the work item to requeue itself on an already destroyed workqueue. Fix this by using cancel_delayed_work_sync() which guarantees that on return the work item is not running anymore. Fixes: 905e51b3 ("dm thin: commit outstanding data every second") Fixes: 85ad643b ("dm thin: add timeout to stop out-of-data-space mode holding IO forever") Signed-off-by:
Nikolay Borisov <kernel@kyup.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Will Deacon authored
[ Upstream commit 12c2ab09 ] When tearing down page tables, we return early for the final level since we know that we won't have any table pointers to follow. Unfortunately, this also means that we forget to free the final level, so we end up leaking memory. Fix the issue by always freeing the current level, but just don't bother to iterate over the ptes if we're at the final level. Cc: <stable@vger.kernel.org> Reported-by:
Zhang Bo <zhangbo_a@xiaomi.com> Signed-off-by:
-
Borislav Petkov authored
[ Upstream commit fcd5c4dd ] EDAC workqueue destruction is really fragile. We cancel delayed work but if it is still running and requeues itself, we still go ahead and destroy the workqueue and the queued work explodes when workqueue core attempts to run it. Make the destruction more robust by switching op_state to offline so that requeuing stops. Cancel any pending work *synchronously* too. EDAC i7core: Driver loaded. general protection fault: 0000 [#1] SMP CPU 12 Modules linked in: Supported: Yes Pid: 0, comm: kworker/0:1 Tainted: G IE 3.0.101-0-default #1 HP ProLiant DL380 G7 RIP: 0010:[<ffffffff8107dcd7>] [<ffffffff8107dcd7>] __queue_work+0x17/0x3f0 < ... regs ...> Process kworker/0:1 (pid: 0, threadinfo ffff88019def6000, task ffff88019def4600) Stack: ... Call Trace: call_timer_fn run_timer_softirq __do_softirq call_softirq do_softirq irq_exit smp_apic_timer_interrupt apic_timer_interrupt intel_idle cpuidle_idle_call cpu_idle Code: ... RIP __queue_work RSP <...> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Borislav Petkov authored
[ Upstream commit 12e26969 ] I get the splat below when modprobing/rmmoding EDAC drivers. It happens because bus->name is invalid after bus_unregister() has run. The Code: section below corresponds to: .loc 1 1108 0 movq 672(%rbx), %rax # mci_1(D)->bus, mci_1(D)->bus .loc 1 1109 0 popq %rbx # .loc 1 1108 0 movq (%rax), %rdi # _7->name, jmp kfree # and %rax has some funky stuff 2030203020312030 which looks a lot like something walked over it. Fix that by saving the name ptr before doing stuff to string it points to. general protection fault: 0000 [#1] SMP Modules linked in: ... CPU: 4 PID: 10318 Comm: modprobe Tainted: G I EN 3.12.51-11-default+ #48 Hardware name: HP ProLiant DL380 G7, BIOS P67 05/05/2011 task: ffff880311320280 ti: ffff88030da3e000 task.ti: ffff88030da3e000 RIP: 0010:[<ffffffffa019da92>] [<ffffffffa019da92>] edac_unregister_sysfs+0x22/0x30 [edac_core] RSP: 0018:ffff88030da3fe28 EFLAGS: 00010292 RAX: 2030203020312030 RBX: ffff880311b4e000 RCX: 000000000000095c RDX: 0000000000000001 RSI: ffff880327bb9600 RDI: 0000000000000286 RBP: ffff880311b4e750 R08: 0000000000000000 R09: ffffffff81296110 R10: 0000000000000400 R11: 0000000000000000 R12: ffff88030ba1ac68 R13: 0000000000000001 R14: 00000000011b02f0 R15: 0000000000000000 FS: 00007fc9bf8f5700(0000) GS:ffff8801a7c40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000403c90 CR3: 000000019ebdf000 CR4: 00000000000007e0 Stack: Call Trace: i7core_unregister_mci.isra.9 i7core_remove pci_device_remove __device_release_driver driver_detach bus_remove_driver pci_unregister_driver i7core_exit SyS_delete_module system_call_fastpath 0x7fc9bf426536 Code: 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 53 48 89 fb e8 52 2a 1f e1 48 8b bb a0 02 00 00 e8 46 59 1f e1 48 8b 83 a0 02 00 00 5b <48> 8b 38 e9 26 9a fe e0 66 0f 1f 44 00 00 66 66 66 66 90 48 8b RIP [<ffffffffa019da92>] edac_unregister_sysfs+0x22/0x30 [edac_core] RSP <ffff88030da3fe28> Signed-off-by:
-
Konstantin Khlebnikov authored
[ Upstream commit 84889d49 ] This patch fixes kernel crash at removing directory which contains whiteouts from lower layers. Cache of directory content passed as "list" contains entries from all layers, including whiteouts from lower layers. So, lookup in upper dir (moved into work at this stage) will return negative entry. Plus this cache is filled long before and we can race with external removal. Example: mkdir -p lower0/dir lower1/dir upper work overlay touch lower0/dir/a lower0/dir/b mknod lower1/dir/a c 0 0 mount -t overlay none overlay -o lowerdir=lower1:lower0,upperdir=upper,workdir=work rm -fr overlay/dir Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
Miklos Szeredi <miklos@szeredi.hu> Cc: <stable@vger.kernel.org> # 3.18+ Signed-off-by:
-
Miklos Szeredi authored
[ Upstream commit cf9a6784 ] Without this copy-up of a file can be forced, even without actually being allowed to do anything on the file. [Arnd Bergmann] include <linux/pagemap.h> for PAGE_CACHE_SIZE (used by MAX_LFS_FILESIZE definition). Signed-off-by:
-
Uri Mashiach authored
[ Upstream commit 9b2761cb ] The maximum chunks used by the function is (SPI_AGGR_BUFFER_SIZE / WSPI_MAX_CHUNK_SIZE + 1). The original commands array had space for (SPI_AGGR_BUFFER_SIZE / WSPI_MAX_CHUNK_SIZE) commands. When the last chunk is used (len > 4 * WSPI_MAX_CHUNK_SIZE), the last command is stored outside the bounds of the commands array. Oops 5 (page fault) is generated during current wl1271 firmware load attempt: root@debian-armhf:~# ifconfig wlan0 up [ 294.312399] Unable to handle kernel paging request at virtual address 00203fc4 [ 294.320173] pgd = de528000 [ 294.323028] [00203fc4] *pgd=00000000 [ 294.326916] Internal error: Oops: 5 [#1] SMP ARM [ 294.331789] Modules linked in: bnep rfcomm bluetooth ipv6 arc4 wl12xx wlcore mac80211 musb_dsps cfg80211 musb_hdrc usbcore usb_common wlcore_spi omap_rng rng_core musb_am335x omap_wdt cpufreq_dt thermal_sys hwmon [ 294.351838] CPU: 0 PID: 1827 Comm: ifconfig Not tainted 4.2.0-00002-g3e9ad27-dirty #78 [ 294.360154] Hardware name: Generic AM33XX (Flattened Device Tree) [ 294.366557] task: dc9d6d40 ti: de550000 task.ti: de550000 [ 294.372236] PC is at __spi_validate+0xa8/0x2ac [ 294.376902] LR is at __spi_sync+0x78/0x210 [ 294.381200] pc : [<c049c760>] lr : [<c049ebe0>] psr: 60000013 [ 294.381200] sp : de551998 ip : de5519d8 fp : 00200000 [ 294.393242] r10: de551c8c r9 : de5519d8 r8 : de3a9000 [ 294.398730] r7 : de3a9258 r6 : de3a9400 r5 : de551a48 r4 : 00203fbc [ 294.405577] r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : de3a9000 [ 294.412420] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 294.419918] Control: 10c5387d Table: 9e528019 DAC: 00000015 [ 294.425954] Process ifconfig (pid: 1827, stack limit = 0xde550218) [ 294.432437] Stack: (0xde551998 to 0xde552000) ... [ 294.883613] [<c049c760>] (__spi_validate) from [<c049ebe0>] (__spi_sync+0x78/0x210) [ 294.891670] [<c049ebe0>] (__spi_sync) from [<bf036598>] (wl12xx_spi_raw_write+0xfc/0x148 [wlcore_spi]) [ 294.901661] [<bf036598>] (wl12xx_spi_raw_write [wlcore_spi]) from [<bf21c694>] (wlcore_boot_upload_firmware+0x1ec/0x458 [wlcore]) [ 294.914038] [<bf21c694>] (wlcore_boot_upload_firmware [wlcore]) from [<bf24532c>] (wl12xx_boot+0xc10/0xfac [wl12xx]) [ 294.925161] [<bf24532c>] (wl12xx_boot [wl12xx]) from [<bf20d5cc>] (wl1271_op_add_interface+0x5b0/0x910 [wlcore]) [ 294.936364] [<bf20d5cc>] (wl1271_op_add_interface [wlcore]) from [<bf15c4ac>] (ieee80211_do_open+0x44c/0xf7c [mac80211]) [ 294.947963] [<bf15c4ac>] (ieee80211_do_open [mac80211]) from [<c0537978>] (__dev_open+0xa8/0x110) [ 294.957307] [<c0537978>] (__dev_open) from [<c0537bf8>] (__dev_change_flags+0x88/0x148) [ 294.965713] [<c0537bf8>] (__dev_change_flags) from [<c0537cd0>] (dev_change_flags+0x18/0x48) [ 294.974576] [<c0537cd0>] (dev_change_flags) from [<c05a55a0>] (devinet_ioctl+0x6b4/0x7d0) [ 294.983191] [<c05a55a0>] (devinet_ioctl) from [<c0517040>] (sock_ioctl+0x1e4/0x2bc) [ 294.991244] [<c0517040>] (sock_ioctl) from [<c017d378>] (do_vfs_ioctl+0x420/0x6b0) [ 294.999208] [<c017d378>] (do_vfs_ioctl) from [<c017d674>] (SyS_ioctl+0x6c/0x7c) [ 295.006880] [<c017d674>] (SyS_ioctl) from [<c000f4c0>] (ret_fast_syscall+0x0/0x54) [ 295.014835] Code: e1550004 e2444034 0a00007d e5953018 (e5942008) [ 295.021544] ---[ end trace 66ed188198f4e24e ]--- Signed-off-by:
Uri Mashiach <uri.mashiach@compulab.co.il> Acked-by:
Igor Grinberg <grinberg@compulab.co.il> Cc: stable@vger.kernel.org Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Peter Wu authored
[ Upstream commit 17bc5586 ] Free skb for received frames with a wrong checksum. This can happen pretty rapidly, exhausting all memory. This fixes a memleak (detected with kmemleak). Originally found while using monitor mode, but it also appears during managed mode (once the link is up). Cc: stable@vger.kernel.org Signed-off-by:
Peter Wu <peter@lekensteyn.nl> ACKed-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Ville Syrjälä authored
[ Upstream commit be8719a6 ] The way the mode probing works is this: 1. All modes currently on the mode list are marked as UNVERIFIED 2. New modes are on the probed_modes list (they start with status OK) 3. Modes are moved from the probed_modes list to the actual mode list. If a mode already on the mode list is deemed to match one of the probed modes, the duplicate is dropped and the mode status updated to OK. After this the probed_modes list will be empty. 4. All modes on the mode list are verified to not violate any constraints. Any that do are marked as such. 5. Any mode left with a non-OK status is pruned from the list, with an appropriate debug message. What all this means is that any mode on the original list that didn't have a duplicate on the probed_modes list, should be left with status UNVERFIED (or previously could have been left with some other status, but never OK). I broke that in commit 05acaec3 ("drm: Reorganize probed mode validation") by always assigning something to the mode->status during the validation step. So any mode from the old list that still passed the validation would be left on the list with status OK in the end. Fix this by not doing the basic mode validation unless the mode already has status OK (meaning it came from the probed_modes list, or at least a duplicate of it was on that list). This way we will correctly prune away any mode from the old mode list that didn't appear on the probed_modes list. Cc: stable@vger.kernel.org Cc: Adam Jackson <ajax@redhat.com> Fixes: 05acaec3 ("drm: Reorganize probed mode validation") Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1449177255-9515-2-git-send-email-ville.syrjala@linux.intel.com Testcase: igt/kms_force_connector_basic/prune-stale-modes Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93332 [danvet: Also applying to drm-misc to avoid too much conflict hell - there's a big pile of patches from Ville on top of this one.] Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Dmitry Tunin authored
[ Upstream commit 1623d0bf ] BugLink: https://bugs.launchpad.net/bugs/1522949 T: Bus=03 Lev=02 Prnt=02 Port=05 Cnt=02 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0930 ProdID=0225 Rev=01.12 S: Manufacturer=Broadcom Corp S: Product=BCM43142A0 S: SerialNumber=4CBB58034671 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by:
Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Miklos Szeredi authored
[ Upstream commit ed06e069 ] We copy i_uid and i_gid of underlying inode into overlayfs inode. Except for the root inode. Fix this omission. Signed-off-by:
-
Thomas Huth authored
[ Upstream commit 760a7364 ] In the old DABR register, the BT (Breakpoint Translation) bit is bit number 61. In the new DAWRX register, the WT (Watchpoint Translation) bit is bit number 59. So to move the DABR-BT bit into the position of the DAWRX-WT bit, it has to be shifted by two, not only by one. This fixes hardware watchpoints in gdb of older guests that only use the H_SET_DABR/X interface instead of the new H_SET_MODE interface. Cc: stable@vger.kernel.org # v3.14+ Signed-off-by:
Thomas Huth <thuth@redhat.com> Reviewed-by:
Laurent Vivier <lvivier@redhat.com> Reviewed-by:
David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
-
David Gibson authored
[ Upstream commit 35a4933a ] 1e75fa8b "time: Condense timekeeper.xtime into xtime_sec" replaced a call to clocksource_cyc2ns() from timekeeping_get_ns() with an open-coded version of the same logic to avoid keeping a semi-redundant struct timespec in struct timekeeper. However, the commit also introduced a subtle semantic change - where clocksource_cyc2ns() uses purely unsigned math, the new version introduces a signed temporary, meaning that if (delta * tk->mult) has a 63-bit overflow the following shift will still give a negative result. The choice of 'maxsec' in __clocksource_updatefreq_scale() means this will generally happen if there's a ~10 minute pause in examining the clocksource. This can be triggered on a powerpc KVM guest by stopping it from qemu for a bit over 10 minutes. After resuming time has jumped backwards several minutes causing numerous problems (jiffies does not advance, msleep()s can be extended by minutes..). It doesn't happen on x86 KVM guests, because the guest TSC is effectively frozen while the guest is stopped, which is not the case for the powerpc timebase. Obviously an unsigned (64 bit) overflow will only take twice as long as a signed, 63-bit overflow. I don't know the time code well enough to know if that will still cause incorrect calculations, or if a 64-bit overflow is avoided elsewhere. Still, an incorrect forwards clock adjustment will cause less trouble than time going backwards. So, this patch removes the potential for intermediate signed overflow. Cc: stable@vger.kernel.org (3.7+) Suggested-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
-
Thomas Petazzoni authored
[ Upstream commit 079ae0c1 ] The Armada 388 GP Device Tree file describes two times a regulator named 'reg_usb2_1_vbus', with the exact same description. This has been wrong since Armada 388 GP support was introduced. Fixes: 928413bd ("ARM: mvebu: Add Armada 388 General Purpose Development Board support") Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: <stable@vger.kernel.org> # v4.0+ Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
-
Alex Deucher authored
[ Upstream commit dbb17a21 ] Need to call this on resume if displays changes during suspend in order to properly be notified of changes. Signed-off-by:
-
Steven Rostedt authored
[ Upstream commit 32abc2ed ] When a long value is read on 32 bit machines for 64 bit output, the parsing needs to change "%lu" into "%llu", as the value is read natively. Unfortunately, if "%llu" is already there, the code will add another "l" to it and fail to parse it properly. Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Acked-by:
Namhyung Kim <namhyung@kernel.org> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20151116172516.4b79b109@gandalf.local.homeSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Malcolm Priestley authored
[ Upstream commit c9d57de6 ] When in FE_TUNE_MODE_ONESHOT the frontend must report the actual capabilities so user can take appropriate action. With frontends that can't do auto inversion this is done by dvb-core automatically so CAN_INVERSION_AUTO is valid. However, when in FE_TUNE_MODE_ONESHOT this is not true. So only set FE_CAN_INVERSION_AUTO in modes other than FE_TUNE_MODE_ONESHOT Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Antonio Ospite authored
[ Upstream commit dcc7fdbe ] v4l2-compliance sends a zeroed struct v4l2_streamparm in v4l2-test-formats.cpp::testParmType(), and this results in a division by 0 in some gspca subdrivers: divide error: 0000 [#1] SMP Modules linked in: gspca_ov534 gspca_main ... CPU: 0 PID: 17201 Comm: v4l2-compliance Not tainted 4.3.0-rc2-ao2 #1 Hardware name: System manufacturer System Product Name/M2N-E SLI, BIOS ASUS M2N-E SLI ACPI BIOS Revision 1301 09/16/2010 task: ffff8800818306c0 ti: ffff880095c4c000 task.ti: ffff880095c4c000 RIP: 0010:[<ffffffffa079bd62>] [<ffffffffa079bd62>] sd_set_streamparm+0x12/0x60 [gspca_ov534] RSP: 0018:ffff880095c4fce8 EFLAGS: 00010296 RAX: 0000000000000000 RBX: ffff8800c9522000 RCX: ffffffffa077a140 RDX: 0000000000000000 RSI: ffff880095e0c100 RDI: ffff8800c9522000 RBP: ffff880095e0c100 R08: ffffffffa077a100 R09: 00000000000000cc R10: ffff880067ec7740 R11: 0000000000000016 R12: ffffffffa07bb400 R13: 0000000000000000 R14: ffff880081b6a800 R15: 0000000000000000 FS: 00007fda0de78740(0000) GS:ffff88012fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000014630f8 CR3: 00000000cf349000 CR4: 00000000000006f0 Stack: ffffffffa07a6431 ffff8800c9522000 ffffffffa077656e 00000000c0cc5616 ffff8800c9522000 ffffffffa07a5e20 ffff880095e0c100 0000000000000000 ffff880067ec7740 ffffffffa077a140 ffff880067ec7740 0000000000000016 Call Trace: [<ffffffffa07a6431>] ? v4l_s_parm+0x21/0x50 [videodev] [<ffffffffa077656e>] ? vidioc_s_parm+0x4e/0x60 [gspca_main] [<ffffffffa07a5e20>] ? __video_do_ioctl+0x280/0x2f0 [videodev] [<ffffffffa07a5ba0>] ? video_ioctl2+0x20/0x20 [videodev] [<ffffffffa07a59b9>] ? video_usercopy+0x319/0x4e0 [videodev] [<ffffffff81182dc1>] ? page_add_new_anon_rmap+0x71/0xa0 [<ffffffff811afb92>] ? mem_cgroup_commit_charge+0x52/0x90 [<ffffffff81179b18>] ? handle_mm_fault+0xc18/0x1680 [<ffffffffa07a15cc>] ? v4l2_ioctl+0xac/0xd0 [videodev] [<ffffffff811c846f>] ? do_vfs_ioctl+0x28f/0x480 [<ffffffff811c86d4>] ? SyS_ioctl+0x74/0x80 [<ffffffff8154a8b6>] ? entry_SYSCALL_64_fastpath+0x16/0x75 Code: c7 93 d9 79 a0 5b 5d e9 f1 f3 9a e0 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 53 31 d2 48 89 fb 48 83 ec 08 8b 46 10 <f7> 76 0c 80 bf ac 0c 00 00 00 88 87 4e 0e 00 00 74 09 80 bf 4f RIP [<ffffffffa079bd62>] sd_set_streamparm+0x12/0x60 [gspca_ov534] RSP <ffff880095c4fce8> ---[ end trace 279710c2c6c72080 ]--- Following what the doc says about a zeroed timeperframe (see http://www.linuxtv.org/downloads/v4l-dvb-apis/vidioc-g-parm.html): ... To reset manually applications can just set this field to zero. fix the issue by resetting the frame rate to a default value in case of an unusable timeperframe. The fix is done in the subdrivers instead of gspca.c because only the subdrivers have notion of a default frame rate to reset the camera to. Signed-off-by:
Antonio Ospite <ao2@ao2.it> Cc: stable@vger.kernel.org Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Sasha Levin authored
[ Upstream commit 4623e596 ] In the 3.17 kernel the poll() behavior changed for output streams: as long as not all buffers were queued up poll() would return that userspace can write. This is fine for the write() call, but when using stream I/O this changed the behavior since the expectation was that it would wait for buffers to become available for dequeuing. This patch only enables the check whether you can queue buffers for file I/O only, and skips it for stream I/O. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: <stable@vger.kernel.org> # for v3.17 and up Signed-off-by:
-
Vito Caputo authored
[ Upstream commit e4ad29fa ] Rather than always allocating the high-order XATTR_SIZE_MAX buffer which is costly and prone to failure, only allocate what is needed and realloc if necessary. Fixes https://github.com/coreos/bugs/issues/489Signed-off-by:
-
Miklos Szeredi authored
[ Upstream commit 97daf8b9 ] When ovl_copy_xattr() encountered a zero size xattr no more xattrs were copied and the function returned success. This is clearly not the desired behavior. Signed-off-by:
-
- 31 Jan, 2016 13 commits
-
-
Greg Kroah-Hartman authored
-
libin authored
commit c84da8b9 upstream. In nop_mcount, shdr->sh_offset and welp->r_offset should handle endianness properly, otherwise it will trigger Segmentation fault if the recordmcount main and file.o have different endianness. Link: http://lkml.kernel.org/r/563806C7.7070606@huawei.comSigned-off-by:
Li Bin <huawei.libin@huawei.com> Signed-off-by:
-
Yang Shi authored
commit 92e788b7 upstream. As previously reported, some userspace applications depend on bogomips showed by /proc/cpuinfo. Although there is much less legacy impact on aarch64 than arm, it does break libvirt. This patch reverts commit 326b16db ("arm64: delay: don't bother reporting bogomips in /proc/cpuinfo"), but with some tweak due to context change and without the pr_info(). Fixes: 326b16db ("arm64: delay: don't bother reporting bogomips in /proc/cpuinfo") Signed-off-by:
Yang Shi <yang.shi@linaro.org> Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Guenter Roeck authored
commit c86576ea upstream. mn10300 builds fail with fs/stat.c: In function 'cp_old_stat': fs/stat.c:163:2: error: 'old_uid_t' undeclared ipc/util.c: In function 'ipc64_perm_to_ipc_perm': ipc/util.c:540:2: error: 'old_uid_t' undeclared Select CONFIG_HAVE_UID16 and remove local definition of CONFIG_UID16 to fix the problem. Fixes: fbc416ff ("arm64: fix building without CONFIG_UID16") Cc: Arnd Bergmann <arnd@arndb.de> Acked-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Acked-by: David Howells <dhowells@redhat.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Al Viro authored
commit 2d4594ac upstream. Sure, it's better to bail out of past-the-eof read and return 0 than return a bogus negative value on such. Only we'd better make sure we are bailing out with 0 and not -ENOMEM... Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Jan Kara authored
commit 74cedf9b upstream. Assume a filesystem with 4KB blocks. When a file has size 1000 bytes and we issue direct IO read at offset 1024, blockdev_direct_IO() reads the tail of the last block and the logic for handling short DIO reads in dio_complete() results in a return value -24 (1000 - 1024) which obviously confuses userspace. Fix the problem by bailing out early once we sample i_size and can reliably check that direct IO read starts beyond i_size. Reported-by:
Avi Kivity <avi@scylladb.com> Fixes: 9fe55eea CC: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Salva Peiró authored
commit eda98796 upstream. The vivid_fb_ioctl() code fails to initialize the 16 _reserved bytes of struct fb_vblank after the ->hcount member. Add an explicit memset(0) before filling the structure to avoid the info leak. Signed-off-by:
Salva Peiró <speirofr@gmail.com> Signed-off-by:
-
Al Viro authored
commit 9225c0b7 upstream. missing get_user() Signed-off-by:
-
Richard Purdie authored
commit 79b568b9 upstream. hid_connect adds various strings to the buffer but they're all conditional. You can find circumstances where nothing would be written to it but the kernel will still print the supposedly empty buffer with printk. This leads to corruption on the console/in the logs. Ensure buf is initialized to an empty string. Signed-off-by:
Richard Purdie <richard.purdie@linuxfoundation.org> [dvhart: Initialize string to "" rather than assign buf[0] = NULL;] Cc: Jiri Kosina <jikos@kernel.org> Cc: linux-input@vger.kernel.org Signed-off-by:
Darren Hart <dvhart@linux.intel.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Mikulas Patocka authored
commit e46e31a3 upstream. When using the Promise TX2+ SATA controller on PA-RISC, the system often crashes with kernel panic, for example just writing data with the dd utility will make it crash. Kernel panic - not syncing: drivers/parisc/sba_iommu.c: I/O MMU @ 000000000000a000 is out of mapping resources CPU: 0 PID: 18442 Comm: mkspadfs Not tainted 4.4.0-rc2 #2 Backtrace: [<000000004021497c>] show_stack+0x14/0x20 [<0000000040410bf0>] dump_stack+0x88/0x100 [<000000004023978c>] panic+0x124/0x360 [<0000000040452c18>] sba_alloc_range+0x698/0x6a0 [<0000000040453150>] sba_map_sg+0x260/0x5b8 [<000000000c18dbb4>] ata_qc_issue+0x264/0x4a8 [libata] [<000000000c19535c>] ata_scsi_translate+0xe4/0x220 [libata] [<000000000c19a93c>] ata_scsi_queuecmd+0xbc/0x320 [libata] [<0000000040499bbc>] scsi_dispatch_cmd+0xfc/0x130 [<000000004049da34>] scsi_request_fn+0x6e4/0x970 [<00000000403e95a8>] __blk_run_queue+0x40/0x60 [<00000000403e9d8c>] blk_run_queue+0x3c/0x68 [<000000004049a534>] scsi_run_queue+0x2a4/0x360 [<000000004049be68>] scsi_end_request+0x1a8/0x238 [<000000004049de84>] scsi_io_completion+0xfc/0x688 [<0000000040493c74>] scsi_finish_command+0x17c/0x1d0 The cause of the crash is not exhaustion of the IOMMU space, there is plenty of free pages. The function sba_alloc_range is called with size 0x11000, thus the pages_needed variable is 0x11. The function sba_search_bitmap is called with bits_wanted 0x11 and boundary size is 0x10 (because dma_get_seg_boundary(dev) returns 0xffff). The function sba_search_bitmap attempts to allocate 17 pages that must not cross 16-page boundary - it can't satisfy this requirement (iommu_is_span_boundary always returns true) and fails even if there are many free entries in the IOMMU space. How did it happen that we try to allocate 17 pages that don't cross 16-page boundary? The cause is in the function iommu_coalesce_chunks. This function tries to coalesce adjacent entries in the scatterlist. The function does several checks if it may coalesce one entry with the next, one of those checks is this: if (startsg->length + dma_len > max_seg_size) break; When it finishes coalescing adjacent entries, it allocates the mapping: sg_dma_len(contig_sg) = dma_len; dma_len = ALIGN(dma_len + dma_offset, IOVP_SIZE); sg_dma_address(contig_sg) = PIDE_FLAG | (iommu_alloc_range(ioc, dev, dma_len) << IOVP_SHIFT) | dma_offset; It is possible that (startsg->length + dma_len > max_seg_size) is false (we are just near the 0x10000 max_seg_size boundary), so the funcion decides to coalesce this entry with the next entry. When the coalescing succeeds, the function performs dma_len = ALIGN(dma_len + dma_offset, IOVP_SIZE); And now, because of non-zero dma_offset, dma_len is greater than 0x10000. iommu_alloc_range (a pointer to sba_alloc_range) is called and it attempts to allocate 17 pages for a device that must not cross 16-page boundary. To fix the bug, we must make sure that dma_len after addition of dma_offset and alignment doesn't cross the segment boundary. I.e. change if (startsg->length + dma_len > max_seg_size) break; to if (ALIGN(dma_len + dma_offset + startsg->length, IOVP_SIZE) > max_seg_size) break; This patch makes this change (it precalculates max_seg_boundary at the beginning of the function iommu_coalesce_chunks). I also added a check that the mapping length doesn't exceed dma_get_seg_boundary(dev) (it is not needed for Promise TX2+ SATA, but it may be needed for other devices that have dma_get_seg_boundary lower than dma_get_max_seg_size). Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
David Woodhouse authored
commit d14053b3 upstream. The VT-d specification says that "Software must enable ATS on endpoint devices behind a Root Port only if the Root Port is reported as supporting ATS transactions." We walk up the tree to find a Root Port, but for integrated devices we don't find one — we get to the host bridge. In that case we *should* allow ATS. Currently we don't, which means that we are incorrectly failing to use ATS for the integrated graphics. Fix that. We should never break out of this loop "naturally" with bus==NULL, since we'll always find bridge==NULL in that case (and now return 1). So remove the check for (!bridge) after the loop, since it can never happen. If it did, it would be worthy of a BUG_ON(!bridge). But since it'll oops anyway in that case, that'll do just as well. Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com> Signed-off-by:
-
Will Deacon authored
commit 32d63978 upstream. In paging_init, we allocate the zero page, memset it to zero and then point TTBR0 to it in order to avoid speculative fetches through the identity mapping. In order to guarantee that the freshly zeroed page is indeed visible to the page table walker, we need to execute a dsb instruction prior to writing the TTBR. Signed-off-by:
-
John Blackwood authored
commit 5db4fd8c upstream. Make sure to clear out any ptrace singlestep state when a ptrace(2) PTRACE_DETACH call is made on arm64 systems. Otherwise, the previously ptraced task will die off with a SIGTRAP signal if the debugger just previously singlestepped the ptraced task. Signed-off-by:
John Blackwood <john.blackwood@ccur.com> [will: added comment to justify why this is in the arch code] Signed-off-by:
-
