Fix a compile error on powerpc.
Signed-off-by: Adrian Bunk <bunk@stusta.de>

User supplied len < 0 can cause leak of kernel memory.
Use unsigned compare instead.
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

I came across this bug in http://bugzilla.kernel.org/show_bug.cgi?id=8155Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

Based on a patch from Don Howard <dhoward@redhat.com>

When calling write() with a buffer larger than 512 bytes, the
driver's write buffer overflows, allowing to overwrite the EIP and
execute arbitrary code with kernel privileges.

In read(), there exists a similar problem, but coming from the device.
A malicous or buggy device sending more than 512 bytes can overflow
of the driver's read buffer, with the same effects as above.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

From: Michael S. Tsirkin <mst@mellanox.co.il>

mthca_table_find() will return the wrong address when the table entry
being searched for is exactly at the beginning of a sglist entry
(other than the first), because it uses >= when it should use >.

Example: assume we have 2 entries in scatterlist, 4K each, offset is 4K.
The current code will return first entry + 4K when we really want
the second entry.

In particular this means mapping an FMR on a memfree HCA may end up
writing the page table into the wrong place, leading to memory
corruption and also causing the HCA to use an incorrect address
translation table.
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

When ipoib_ib_dev_flush() is called because of a port event, the
driver needs to rejoin all multicast groups, since the flush will call
ipoib_mcast_dev_flush() (via ipoib_ib_dev_down()).  Otherwise no
(non-broadcast) multicast groups will be rejoined until the networking
core calls ->set_multicast_list again, and so multicast reception will
be broken for potentially a long time.
Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

We discovered a problem when running IPoIB applications on multiple
CPUs on an Altix system. Many messages such as:

ib_mthca 0002:01:00.0: SQ 000014 full (19941644 head, 19941707 tail, 64 max, 0 nreq)

appear in syslog, and the driver wedges up.

Apparently this is because writes to the doorbells from different CPUs
reach the device out of order. The following patch adds mmiowb() calls
after doorbell rings to ensure the doorbell writes are ordered.
Signed-off-by: Arthur Kepner <akepner@sgi.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

The second argument to free_npages() was being incorrectly
calculated, which would thus access far past the end of the
arena->map[] bitmap.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

Repeated -j20 kernel builds on a G5 Quad running an SMP PREEMPT kernel
would often collapse within a day, some exec failing with "Bad address".
In each case examined, load_elf_binary was doing a kernel_read, but
generic_file_aio_read's access_ok saw current->thread.fs.seg as USER_DS
instead of KERNEL_DS.

objdump of filemap.o shows gcc 4.1.0 emitting "mr r5,r13 ... ld r9,416(r5)"
here for get_paca()->__current, instead of the expected and much more usual
"ld r9,416(r13)"; I've seen other gcc4s do the same, but perhaps not gcc3s.

So, if the task is preempted and rescheduled on a different cpu in between
the mr and the ld, r5 will be looking at a different paca_struct from the
one it's now on, pick up the wrong __current, and perhaps the wrong seg.
Presumably much worse could happen elsewhere, though that split is rare.

Other architectures appear to be safe (x86_64's read_pda is more limiting
than get_paca), but ppc64 needs to force "current" into one instruction.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

CRC-32 checking during ULE decapsulation always failed on x86_64 systems due
to the size of a variable used to store CRC. This bug was discovered on
Fedora Core 6 with kernel-2.6.18-1.2849. The i386 counterpart has no such
problem. This patch has been tested on 64-bit system as well as 32-bit system.
Signed-off-by: Ang Way Chuang <wcang@nrg.cs.usm.my>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

On 2/28/07, KOVACS Krisztian <hidden@balabit.hu> wrote:
>
>   Hi,
>
>   While reading TCP minisock code I've found this suspiciously looking
> code fragment:
>
> - 8< -
> struct sock *tcp_create_openreq_child(struct sock *sk, struct request_sock *req, struct sk_buff *skb)
> {
>         struct sock *newsk = inet_csk_clone(sk, req, GFP_ATOMIC);
>
>         if (newsk != NULL) {
>                 const struct inet_request_sock *ireq = inet_rsk(req);
>                 struct tcp_request_sock *treq = tcp_rsk(req);
>                 struct inet_connection_sock *newicsk = inet_csk(sk);
>                 struct tcp_sock *newtp;
> - 8< -
>
>   The above code initializes newicsk to inet_csk(sk), isn't that supposed
> to be inet_csk(newsk)?  As far as I can tell this might leave
> icsk_ack.last_seg_size zero even if we do have received data.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

Without this patch, the device will not be detected after firmware download
on big endian systems.
Signed-off-by: Jin-Bong lee <jinbong.lee@samsung.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

Reading /proc/net/anycast6 when there is no anycast address
on an interface results in an ever-increasing inet6_dev reference
count, as well as a reference to the netdevice you can't get rid of.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

This patch fixes a bug in Linux IPv6 stack which caused anycast address
to be added to a device prior DAD has been completed. This led to
incorrect reference count which resulted in infinite wait for
unregister_netdevice completion on interface removal.
Signed-off-by: Michal Wrobel <xmxwx@asn.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

Based almost entirely upon a patch by Joerg Friedrich
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

The header may have moved when trimming.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

CT based mach64 cards were reported to hang on sparc64 boxes when
compiled with gcc-4.1.x and later.

Looking at this piece of code, it's no surprise.  A critical
delay was implemented as an empty for() loop, and gcc 4.0.x
and previous did not optimize it away, so we did get a delay.

But gcc-4.1.x and later can optimize it away, and we get crashes.

Use a real udelay() to fix this.  Fix verified on SunBlade100.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

1. EL3WINDOW is always 1 when lock is not held.

2. The second argument of el3_interrupt is 'void *dev_id',
not 'struct el3_private *lp'.

Adrian Bunk:
backported to 2.6.16
Signed-off-by: Komuro <komurojun-mbn@nifty.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

Adds missing call to phys_to_virt() in the
lib/swiotlb.c:swiotlb_sync_sg() function.  Without this change, a kernel
panic will always occur whenever a SWIOTLB bounce buffer from a
scatter-gather list gets synced.
Signed-off-by: David Moore <dcm@acm.org>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

It looks like there is a bug in init_reap_node() in slab.c that can cause
multiple oops's on certain ES7000 configurations.  The variable reap_node
is defined per cpu, but only initialized on a single CPU.  This causes an
oops in next_reap_node() when __get_cpu_var(reap_node) returns the wrong
value.  Fix is below.
Signed-off-by: Dan Yeisley <dan.yeisley@unisys.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

psmouse_show_int_attr() and psmouse_set_int_attr() were accessing
unsigned int fields as unsigned long, which gave garbage on x86_64.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

Signed-off-by: Adrian Bunk <bunk@stusta.de>

Commit 2b48716d back in January
2006 was a bit overzealous. It removed .owner from all i2c drivers,
including i2c-isa ones, while they still need it.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

Dave Jones wrote:
> sfuzz         D 724EF62A  2828 28717  28691                     (NOTLB)
>        cd69fe98 00000082 0000012d 724ef62a 0001971a 00000010 00000007 df6d22b0
>        dfd81080 725bbc5e 0001971a 000cc634 00000001 df6d23bc c140e260 00000202
>        de1d5ba0 cd69fea0 de1d5ba0 00000000 00000000 de1d5b60 de1d5b8c de1d5ba0
> Call Trace:
>  [<c05b1708>] lock_sock+0x75/0xa6
>  [<e0b0b604>] dn_getname+0x18/0x5f [decnet]
>  [<c05b083b>] sys_getsockname+0x5c/0xb0
>  [<c05b0b46>] sys_socketcall+0xef/0x261
>  [<c0403f97>] syscall_call+0x7/0xb
> DWARF2 unwinder stuck at syscall_call+0x7/0xb
>
> I wonder if the plethora of lockdep related changes inadvertantly broke something?

Looks like unbalanced locking.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

Fix from http://bugzilla.kernel.org/show_bug.cgi?id=7747Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

This patch refactors SENSOR_DEVICE_ATTR_2 macro, following pattern set by
SENSOR_ATTR.  First it creates a new macro SENSOR_ATTR_2() which expands
to an initialization expression, then it uses that in SENSOR_DEVICE_ATTR_2,
which declares and initializes a struct sensor_device_attribute_2.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

This patch refactors SENSOR_DEVICE_ATTR macro.  First it creates a new
macro SENSOR_ATTR() which expands to an initialization expression, then
it uses that in SENSOR_DEVICE_ATTR, which declares and initializes a
struct sensor_device_attribute.

IOW, SENSOR_ATTR() imitates __ATTR() in include/linux/device.h.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

Put in new email address.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

Update the pci device id table to match 2.6.20 (except for new 88e807x
that is still experimental).
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

This is a simple enhancement to dump more device statistics with ethtool.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

Ben added this for 2.6.18, it allows sky2 to run on big endian.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

The 802 standard allows pause frames to be either unicast or multicast.
Switches seem to send unicast frames, but on a direct link, other boards send
multicast pause.  Unless the filter bit is set, these pause frames get
dropped.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

Different chipsets have different amount of ram buffer (some have none),
so need to make sure that driver does proper setup for all cases from 0 on
to 48K, in units of 1K.

This is a backport of the code from 2.6.19 or later
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

This patch fixes ext3 block bitmap leakage,
which leads to the following fsck messages on
_healthy_ filesystem:
Block bitmap differences:  -64159 -73707

All kernels up to 2.6.17 have this bug.

Found by
   Vasily Averin <vvs@sw.ru> and Andrey Savochkin <saw@sawoct.com>
Test case triggered the issue was created by
   Dmitry Monakhov <dmonakhov@sw.ru>
Signed-Off-By: Kirill Korotaev <dev@openvz.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>