1. Set extended packet length bit in phy register 0x18 shadow register 0
on all chips that support jumbo frames (i.e. all chips except 5705 and
its variants). Jumbo frame reception is less reliable (more CRC errors)
if this bit is not set. This bit can be set regardless of the current
MTU setting.


2. Remove FTQ reset during chip init. This is the best fix for the ASF
race condition problem that I mentioned a few months ago. The FTQ reset
is redundant as it is already reset during GRC reset.

This fixes a minor problem with fcntl.

get_close_on_exec() uses FD_ISSET() to determine the fd state, but this
is not guaranteed to be either 0 of FD_CLOEXEC.  Make that explicit.

Also, the argument of set_close_on_exec() is being AND'ed with the
literal constant 1.  Make it use an explicit FD_CLOEXEC test.

(The broken macro only triggers for non-gcc compiles, but
still..)

Original patch from Hannes Reinecke <hare@suse.de>.

This is required to have modular IDE drivers announce themselves
properly in modules.pcimap.

Implement migrate_all_tasks() which moves tasks off cpu while machine
is stopped.

The registration and unregistration of CPU notifiers should be done
under the cpucontrol sem.  They should also be exported.

include files moved to fs/hpfs/, gratitious #include removed, stuff that
doesn't have to be global made static, misindented chunk of
hpfs_readdir() put in place, etc.

	Fixed the locking scheme.  The need of extra locking was caused by
the fact that hpfs_write_inode() must update directory entry; since HPFS
directories are implemented as b-trees, we must provide protection both
against rename() (to make sure that we update the entry in right directory)
and against rebalancing of the parent.

	Old scheme had both deadlocks and races - to start with, we had no
protection against rename()/unlink()/rmdir(), since (a) locking parent
was done without any warranties that it will remain our parent and (b)
check that we still have a directory entry (== have positive nlink) was
done before we tried to lock the parent.  Moreover, iget serialization
killed two steps ago gave immediate deadlocks if iget() of parent had
triggered another hpfs_write_inode().

	New scheme introduces another per-inode semaphore (hpfs-only,
obviously) protecting the reference to parent.  It's taken on
rename/rmdir/unlink victims and inode being moved by rename.  Old semaphores
are taken only on parent(s) and only after we grab one(s) of the new kind.
hpfs_write_inode() gets the new semaphore on our inode, checks nlink and
if it's non-zero grabs parent and takes the old semaphore on it.

	Order among the semaphores of the same kind is arbitrary - the only
function that might take more than one of the same kind is hpfs_rename()
and it's serialized by VFS.

	We might get away with only one semaphore, but then the ordering
issues would bite us big way - we would have to make sure that child is
always locked before parent (hpfs_write_inode() leaves no other choice)
and while that's easy to do for almost all operations, rename() is a bitch -
as always.  And per-superblock rwsem giving rename() vs. write_inode()
exclusion on hpfs would make the entire thing too baroque for my taste.
	->readdir() takes no locks at all (protection against directory
modifications is provided by VFS exclusion), ditto for ->lookup().
	->llseek() on directories switched to use of (VFS) ->i_sem, so
it's safe from directory modifications and ->readdir() is safe from it -
no hpfs locks are needed here.

We used to have GFP_KERNEL kmalloc() done by the code that held hpfs
lock on directory.  That could trigger a call of hpfs_write_inode() and
deadlock; fixed by switch to GFP_NOFS.  Same for hpfs inodes themselves
- hpfs_write_inode() calls iget() and that could trigger both the
deadlocks (avoidable with very baroque locking scheme) and stack
overflows (unavoidable unless we kill potential recursion here).

Killed the nightmares in hpfs iget handling.  Since in some (fairly
frequent) cases hpfs_read_inode() could avoid any IO (basically, lookup
hitting a native HPFS regular file can get all data from directory
entry) hpfs had a flag passed to that sucker.  Said flag had been
protected by a semaphore lookalike made out of spit and duct-tape and
callers of iget looked like

	hpfs_lock_iget(sb, flag);
	result = iget(sb, ino);
	hpfs_unlock_iget(sb);

Since now we are calling hpfs_read_inode() directly (note that calling
it without hpfs_lock_iget() would simply break) we can forget all that
crap and get rid of the flag - caller knows what it wants to call.

BTW, that had killed one of the last sleep_on() users in fs/*/*.

	Preparation to hpfs iget locking cleanup - remaining iget() callers
replaced with explicit iget_locked() + call hpfs_read_inode()/unlock_new_inode()
if inode is new.

	1) common initialization for all paths in hpfs_read_inode() taken into
a separate helper (hpfs_init_inode())
	2) hpfs mkdir(),create(),mknod() and symlink() do not bother with
iget() anymore - they call new_inode(), do initializations and insert new
inode into icache.  Handling of OOM failures cleaned up - if we can't
allocate in-core inode, bail instead of corrupting the filesystem.
Allocating in-core inode early also avoids one of the deadlocks here
(hpfs_write_inode() from memory pressure by kmem_cache_alloc() could
deadlock on attempt to lock our directory).
	3) hpfs_write_inode() marks the inode dirty again in case if it
fails to iget() its parent directory.  Again, OOM could trigger fs corruption
here.

	hpfs_{lock,unlock}_{2,3}inodes() killed; all places that take more than
one lock have ->i_sem held by VFS on all inodes involved and all hpfs per-inode
locks are of the same type.  IOW, we can replace these guys with multiple
hpfs_lock_inode() - order doesn't matter here.

Failure exits in hpfs/namei.c merged and cleaned up.

From: Armin Schindler <armin@melware.de>

Fixed NULL pointer reference in recv_handler()

From: Armin Schindler <armin@melware.de>

Use the notifier workqueue in a cleaner way.

From: Armin Schindler <armin@melware.de>

Show debug messages if debug is enabled only.

From: "Jose R. Santos" <jrsantos@austin.ibm.com>

After discussing it with Neil, he fell that the original justification for
taking the kernel_lock on find_exported_dentry() is not longer valid and
should be safe to remove.

This patch fixes an issue while running SpecSFS where under memory
pressure, shrinking dcache cause find_exported_dentry() to allocate
disconnected dentries that later needed to be properly connected.  The
connecting part of the code was done with BKL taken which cause a sharp
drop in performance during iterations and profiles showing 75% time spent
on find_exported_dentry().  After applying the patch, time spent on the
function is reduce to <1%.

I have tested this on an 8-way machine with 56 filesystems for several days
now with no problems using ext2, ext3, xfs and jfs.

Don't panic if the journal superblock is wrecked: just fail the mount.

From: Anton Blanchard <anton@samba.org>

From: Robert Love <rml@ximian.com>

arch/ppc64/Kconfig's entry for CONFIG_PREEMPT is missing the description
after the "bool" statement, so the entry does not show up.

Also, the help description mentions a restriction that is not [any longer]
true.

From: Anton Blanchard <anton@samba.org>

Sometimes we just want to pass the error up to the kernel and let it oops.
X it is.

From: Anton Blanchard <anton@samba.org>

- remove now unused kernel syscalls.
- wrap recently added defines in #ifdef __KERNEL__, fixes glibc
  compile issue
- some of our extra syscalls used asmlinkage, some did not. Make them
  consistent

From: Tom Rini <trini@kernel.crashing.org>

The following patch comes from Paul Mackerras.  Earlier on in 2.6,
arch/ppc/boot/utils/mkprep.c was changed slightly so that it would build
and work on Solaris.  Doing this required changing from filling out
pointers to an area to filling out a local copy of the struct.  However, a
memcpy was left out, and the info is only needed on some machines to boot.
The following adds in the missing memcpy and allows for IBM PRePs to boot
from a raw floppy again.

From: Olaf Hering <olh@suse.de>

Current Linus tree adds an extra space and dot to the mkprep options.
`make all' with an smp config doesnt work.  This patch fixes it.

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Please apply this fix to backout an erroneous change in loopback.c
The statistics structure is allocated separately from the
loopback_dev structure, and the current code overwrites something
other than the statistics.  In my case the scsi_cmd_pool structure.

into kernel.bkbits.net:/home/davem/net-2.6

The attached patch fixes the problem: de->macmode variable,
meant to shadow MacMode (CSR6) register, was used inconsistently,
causing some updates to this register to be dropped.

2.4 kernel doesn't shadow this register at all, so I removed
shadowing from 2.6 as well.

into nuts.davemloft.net:/disk1/BK/net-2.6

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Without this change, GCC thinks it's OK to clobber r13.  It doesn't do it
very often, but it's enough if it does it once and it turns out
acpi_bus_receive_event() had code that would trigger this issue.
Fix by declaring r13 as a global register variable.

All users of hwif->mmio correctly handle resources themselves
(hwif->mmio == 2) so remove ide_mmio_dma() and ide_release_mmio_dma().

Nowadays buddha.c, gayle.c and macide.c handle resources themselves
(hwif->mmio == 2).

Acked by Geert.

It's write-only these days.

Here is the ChangeLog:

	* wireless/Kconfig: fix typos, add SMC2835W-V2
	* islpci_hotplug.c: new version 1.1, authors list, and
	module description updated appropriately
	* isl_ioctl.c, islpci_dev.c, 
	islpci_eth.c, islpci_hotplug.c, islpci_mgt.c: 
	s/ndev->priv/netdev_priv(ndev)/g
	* islpci_hotplug.c: Add PCI ID values for SMC2835W-V2 cardbus card
	Patch by Manuel Lauss <manuel.lauss@fh-hagenberg.at>
	* isl_38xx.[ch]: include firmware.h in header, remove
	declaration of headers in c file. Fix compiler warnings.
	* islpci_dev.c (islpci_alloc_memory),
	* islpci_eth.c (islpci_eth_cleanup_transmit, 
	islpci_eth_transmit, islpci_eth_receive): deal with skb stray 
	pointer, declare NULL.
	* isl_38xx.c: remove unecessary __KERNEL_SYSCALLS__ and
	re-ordered headers per vger.kernel.org - liking.
	* isl_ioctl.c, islpci_mgt.c: move from MODULE_PARAM to the new
	module_param, which is type-safe. Includes the new 
	<linux/moduleparam.h>.
	* isl_ioctl.c (prism54_[s|g]et_[maxframeburst|profile]): added.
	Not adding ioctls as ajfa is working on moving current private ioctls
	to subioctls.
	* isl_oid.h (dot11_[maxframeburst|preamblesettings|
	slotsettings|nonerpstatus|nonerpprotection]_t): added.
	Note: more ioctls can be added here, I believe problems
	with mixed modes can be pinpointed here, with these values.

From: Boehm Olaf <olaf.boehm@lanner.de>
From: Jindrich Makovicka <makovick@kmlinux.fjfi.cvut.cz>

Wider range for 33MHz timing and PLL setup for HPT374
(using the HPT370A timing table, as it is the same as
used in the "opensource" driver by HighPoint).

fixes bugzilla bugs #2209 and #2271

cdu31a.c needs tmp_irq outside of the block it is declared in.  Move it
to the outer block.