- 27 Feb, 2012 1 commit
-
-
Linus Torvalds authored
commit be98c2cd upstream. It was marked asmlinkage for some really old and stale legacy reasons. Fix that and the equally stale comment. Noticed when debugging the irq_fpu_usable() bugs. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 20 Feb, 2012 30 commits
-
-
Greg Kroah-Hartman authored
-
Alexey Dobriyan authored
commit f2ea0f5f upstream. Use standard ror64() instead of hand-written. There is no standard ror64, so create it. The difference is shift value being "unsigned int" instead of uint64_t (for which there is no reason). gcc starts to emit native ROR instructions which it doesn't do for some reason currently. This should make the code faster. Patch survives in-tree crypto test and ping flood with hmac(sha512) on. Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Stefano Stabellini authored
commit 207d543f upstream. Signed-off-by:
Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Seungwon Jeon authored
commit f9c2a0dc upstream. Current PIO mode makes a kernel crash with CONFIG_HIGHMEM. Highmem pages have a NULL from sg_virt(sg). This patch fixes the following problem. Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 817 [#1] PREEMPT SMP Modules linked in: CPU: 0 Not tainted (3.0.15-01423-gdbf465f #589) PC is at dw_mci_pull_data32+0x4c/0x9c LR is at dw_mci_read_data_pio+0x54/0x1f0 pc : [<c0358824>] lr : [<c035988c>] psr: 20000193 sp : c0619d48 ip : c0619d70 fp : c0619d6c r10: 00000000 r9 : 00000002 r8 : 00001000 r7 : 00000200 r6 : 00000000 r5 : e1dd3100 r4 : 00000000 r3 : 65622023 r2 : 0000007f r1 : eeb96000 r0 : e1dd3100 Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment xkernel Control: 10c5387d Table: 61e2004a DAC: 00000015 Process swapper (pid: 0, stack limit = 0xc06182f0) Stack: (0xc0619d48 to 0xc061a000) 9d40: e1dd3100 e1a4f000 00000000 e1dd3100 e1a4f000 00000200 9d60: c0619da4 c0619d70 c035988c c03587e4 c0619d9c e18158f4 e1dd3100 e1dd3100 9d80: 00000020 00000000 00000000 00000020 c06e8a84 00000000 c0619e04 c0619da8 9da0: c0359b24 c0359844 e18158f4 e1dd3164 e1dd3168 e1dd3150 3d02fc79 e1dd3154 9dc0: e1dd3178 00000000 00000020 00000000 e1dd3150 00000000 c10dd7e8 e1a84900 9de0: c061e7cc 00000000 00000000 0000008d c06e8a84 c061e780 c0619e4c c0619e08 9e00: c00c4738 c0359a34 3d02fc79 00000000 c0619e4c c05a1698 c05a1670 c05a165c 9e20: c04de8b0 c061e780 c061e7cc e1a84900 ffffed68 0000008d c0618000 00000000 9e40: c0619e6c c0619e50 c00c48b4 c00c46c8 c061e780 c00423ac c061e7cc ffffed68 9e60: c0619e8c c0619e70 c00c7358 c00c487c 0000008d ffffee38 c0618000 ffffed68 9e80: c0619ea4 c0619e90 c00c4258 c00c72b0 c00423ac ffffee38 c0619ecc c0619ea8 9ea0: c004241c c00c4234 ffffffff f8810000 0000006d 00000002 00000001 7fffffff 9ec0: c0619f44 c0619ed0 c0048bc0 c00423c4 220ae7a9 00000000 386f0d30 0005d3a4 9ee0: c00423ac c10dd0b8 c06f2cd8 c0618000 c0594778 c003a674 7fffffff c0619f44 9f00: 386f0d30 c0619f18 c00a6f94 c005be3c 80000013 ffffffff 386f0d30 0005d3a4 9f20: 386f0d30 0005d2d1 c10dd0a8 c10dd0b8 c06f2cd8 c0618000 c0619f74 c0619f48 9f40: c0345858 c005be00 c00a2440 c0618000 c0618000 c00410d8 c06c1944 c00410fc 9f60: c0594778 c003a674 c0619f9c c0619f78 c004a7e8 c03457b4 c0618000 c06c18f8 9f80: 00000000 c0039c70 c06c18d4 c003a674 c0619fb4 c0619fa0 c04ceafc c004a714 9fa0: c06287b4 c06c18f8 c0619ff4 c0619fb8 c0008b68 c04cea68 c0008578 00000000 9fc0: 00000000 c003a674 00000000 10c5387d c0628658 c003aa78 c062f1c4 4000406a 9fe0: 413fc090 00000000 00000000 c0619ff8 40008044 c0008858 00000000 00000000 Backtrace: [<c03587d8>] (dw_mci_pull_data32+0x0/0x9c) from [<c035988c>] (dw_mci_read_data_pio+0x54/0x1f0) r6:00000200 r5:e1a4f000 r4:e1dd3100 [<c0359838>] (dw_mci_read_data_pio+0x0/0x1f0) from [<c0359b24>] (dw_mci_interrupt+0xfc/0x4a4) [<c0359a28>] (dw_mci_interrupt+0x0/0x4a4) from [<c00c4738>] (handle_irq_event_percpu+0x7c/0x1b4) [<c00c46bc>] (handle_irq_event_percpu+0x0/0x1b4) from [<c00c48b4>] (handle_irq_event+0x44/0x64) [<c00c4870>] (handle_irq_event+0x0/0x64) from [<c00c7358>] (handle_fasteoi_irq+0xb4/0x124) r7:ffffed68 r6:c061e7cc r5:c00423ac r4:c061e780 [<c00c72a4>] (handle_fasteoi_irq+0x0/0x124) from [<c00c4258>] (generic_handle_irq+0x30/0x38) r7:ffffed68 r6:c0618000 r5:ffffee38 r4:0000008d [<c00c4228>] (generic_handle_irq+0x0/0x38) from [<c004241c>] (asm_do_IRQ+0x64/0xe0) r5:ffffee38 r4:c00423ac [<c00423b8>] (asm_do_IRQ+0x0/0xe0) from [<c0048bc0>] (__irq_svc+0x80/0x14c) Exception stack(0xc0619ed0 to 0xc0619f18) Signed-off-by:
Seungwon Jeon <tgih.jun@samsung.com> Acked-by:
Will Newton <will.newton@imgtec.com> Signed-off-by:
Chris Ball <cjb@laptop.org> Signed-off-by:
-
Ludovic Desroches authored
commit 18ee684b upstream. Sometimes a software reset is needed. Then some registers are saved and restored but the interrupt mask register is missing. It causes issues with sdio devices whose interrupts are masked after reset. Signed-off-by:
Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
-
Takashi Iwai authored
commit 02a237b2 upstream. Since 3.2 kernel, the driver starts trying to assign the multi-io DACs before the speaker, thus it assigns DAC2/3 for multi-io and DAC4 for the speaker for a standard laptop setup like a HP, a speaker, a mic-in and a line-in. However, on Acer Aspire 6935, it seems that the speaker pin 0x14 must be connected with either DAC1 or 2; otherwise it results in silence by some reason, although the codec itself allows the routing to DAC3/4. As a workaround, the connection list of each pin is reduced to be mapped to either only DAC1/2 or DAC3/4, so that the compatible assignment as in kernel 3.1 is achieved. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42740Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit fc1156c0 upstream. VT1705 codec has two ADCs where the secondary ADC has no MUX but only a fixed connection to the mic pin. This confused the driver and it tries always overriding the input-source selection by assumption of the existing MUX for the secondary ADC, resulted in resetting the input-source at each time PM (including power-saving) occurs. The fix is simply to check the existence of MUX for secondary ADCs in the initialization code. Tested-by:
Anisse Astier <anisse@astier.eu> Signed-off-by:
-
Daniel T Chen authored
commit 27c3afe6 upstream. BugLink: https://bugs.launchpad.net/bugs/930842 The reporter states that audio is inaudible by default without muting 'External Amplifier'. Add a quirk to handle his SSID so that changing the control is not necessary. Reported-and-tested-by:
Benjamin Carlson <elderbubba0810@gmail.com> Signed-off-by:
Daniel T Chen <crimsun@ubuntu.com> Signed-off-by:
-
Rabin Vincent authored
commit 2673b4cf upstream. While 7a401a97 ("backing-dev: ensure wakeup_timer is deleted") addressed the problem of the bdi being freed with a queued wakeup timer, there are other races that could happen if the wakeup timer expires after/during bdi_unregister(), before bdi_destroy() is called. wakeup_timer_fn() could attempt to wakeup a task which has already has been freed, or could access a NULL bdi->dev via the wake_forker_thread tracepoint. Cc: Jens Axboe <axboe@kernel.dk> Reported-by:
Chanho Min <chanho.min@lge.com> Reviewed-by:
Namjae Jeon <linkinjeon@gmail.com> Signed-off-by:
Rabin Vincent <rabin@rab.in> Signed-off-by:
Wu Fengguang <fengguang.wu@intel.com> Signed-off-by:
-
Herbert Xu authored
commit 3a92d687 upstream. Unfortunately in reducing W from 80 to 16 we ended up unrolling the loop twice. As gcc has issues dealing with 64-bit ops on i386 this means that we end up using even more stack space (>1K). This patch solves the W reduction by moving LOAD_OP/BLEND_OP into the loop itself, thus avoiding the need to duplicate it. While the stack space still isn't great (>0.5K) it is at least in the same ball park as the amount of stack used for our C sha1 implementation. Note that this patch basically reverts to the original code so the diff looks bigger than it really is. Signed-off-by:
-
Herbert Xu authored
commit 58d7d18b upstream. The previous patch used the modulus operator over a power of 2 unnecessarily which may produce suboptimal binary code. This patch changes changes them to binary ands instead. Signed-off-by:
-
Jeff Layton authored
commit ff4fa4a2 upstream. standard_receive3 will check the validity of the response from the server (via checkSMB). It'll pass the result of that check to handle_mid which will dequeue it and mark it with a status of MID_RESPONSE_MALFORMED if checkSMB returned an error. At that point, standard_receive3 will also return an error, which will make the demultiplex thread skip doing the callback for the mid. This is wrong -- if we were able to identify the request and the response is marked malformed, then we want the demultiplex thread to do the callback. Fix this by making standard_receive3 return 0 in this situation. Reported-and-Tested-by:
Mark Moseley <moseleymark@gmail.com> Signed-off-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Jeff Layton authored
commit 8b0192a5 upstream. Currently, it's always set to 0 (no oplock requested). Signed-off-by:
-
Nikolaus Schulz authored
commit 09e87e5c upstream. In order to enable temperature mode aka automatic mode for the F75373 and F75375 chips, the two FANx_MODE bits in the fan configuration register need be set to 01, not 10. Signed-off-by:
Nikolaus Schulz <mail@microschulz.de> Signed-off-by:
-
Wu Fengguang authored
commit 977b7e3a upstream. When a SD card is hot removed without umount, del_gendisk() will call bdi_unregister() without destroying/freeing it. This leaves the bdi in the bdi->dev = NULL, bdi->wb.task = NULL, bdi->bdi_list removed state. When sync(2) gets the bdi before bdi_unregister() and calls bdi_queue_work() after the unregister, trace_writeback_queue will be dereferencing the NULL bdi->dev. Fix it with a simple test for NULL. LKML-reference: http://lkml.org/lkml/2012/1/18/346Reported-by:
-
Wu Fengguang authored
commit 15eb77a0 upstream. bdi_prune_sb() resets sb->s_bdi to default_backing_dev_info when the tearing down the original bdi. Fix trace_writeback_single_inode to use sb->s_bdi=default_backing_dev_info rather than bdi->dev=NULL for a teared down bdi. Reported-by:
-
Eliad Peller authored
commit 07ae2dfc upstream. The current code checks for stored_mpdu_num > 1, causing the reorder_timer to be triggered indefinitely, but the frame is never timed-out (until the next packet is received) Signed-off-by:
Eliad Peller <eliad@wizery.com> Acked-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Dan Carpenter authored
commit f6302f1b upstream. "subbuf_size" and "n_subbufs" come from the user and they need to be capped to prevent an integer overflow. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Wu Fengguang authored
commit 3310225d upstream. PROP_MAX_SHIFT should be set to <=32 on 64-bit box. This fixes two bugs in the below lines of bdi_dirty_limit(): bdi_dirty *= numerator; do_div(bdi_dirty, denominator); 1) divide error: do_div() only uses the lower 32 bit of the denominator, which may trimmed to be 0 when PROP_MAX_SHIFT > 32. 2) overflow: (bdi_dirty * numerator) could easily overflow if numerator used up to 48 bits, leaving only 16 bits to bdi_dirty Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Reported-by:
Ilya Tumaykin <librarian_rus@yahoo.com> Tested-by:
-
Atsushi Nemoto authored
commit a1728800 upstream. 8<---------------------------------------------------------------------- From: Ralf Roesch <ralf.roesch@rw-gmbh.de> Date: Wed, 16 Nov 2011 09:33:50 +0100 Subject: net: enable TC35815 for MIPS again TX493[8,9] MIPS SoCs support 2 Ethernet channels of type TC35815 which are connected to the internal PCI controller. And JMR3927 MIPS board has a TC35815 chip on board. These dependencies were lost on movement to drivers/net/ethernet/toshiba. Signed-off-by:
Ralf Roesch <ralf.roesch@rw-gmbh.de> Signed-off-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Nikolaus Schulz authored
commit eb2f255b upstream. In order to extract the high byte of the 16-bit word, shift the word to the right, not to the left. Signed-off-by:
Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by:
-
Felix Fietkau authored
commit 55a2bb4a upstream. commit adb5066a "ath9k_hw: do not apply the 2.4 ghz ack timeout workaround to cts" reduced the hardware CTS timeout to the normal values specified by the standard, but it turns out while it doesn't need the same extra time that it needs for the ACK timeout, it does need more than the value specified in the standard, but only for 2.4 GHz. This patch brings the CTS timeout value in sync with the initialization values, while still allowing adjustment for bigger distances. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Reported-by:
Seth Forshee <seth.forshee@canonical.com> Reported-by:
Marek Lindner <lindner_marek@yahoo.de> Signed-off-by:
-
Felix Fietkau authored
commit f88373fa upstream. commit b4a82a0a "ath9k_hw: fix interpretation of the rx KeyMiss flag" fixed the interpretation of the KeyMiss flag for keycache based lookups, however WEP encryption uses a static index, so KeyMiss is always asserted for it, even though frames are decrypted properly. Fix this by clearing the ATH9K_RXERR_KEYMISS flag if no keycache based lookup was performed. Signed-off-by:
Laurent Bonnans <bonnans.l@gmail.com> Reported-by:
Jurica Vukadin <u.ra604@googlemail.com> Signed-off-by:
-
Mohammed Shafi Shajakhan authored
commit 07445f68 upstream. all works need to be initialized before ieee80211_register_hw to prevent mac80211 call backs such as drv_start, drv_config getting started. otherwise we would queue/cancel works before initializing them and it leads to kernel panic. this issue can be recreated with the following script in Chrome laptops with AR928X cards, with background scan running (or) Network manager is running while true do sudo modprobe -v ath9k sleep 3 sudo modprobe -r ath9k sleep 3 done EIP: [<81040a47>] __cancel_work_timer+0xb8/0xe1 SS:ESP 0068:f6be9d70 ---[ end trace 4f86d6139a9900ef ]--- Registered led device: ath9k-phy0 ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xf88a0000, irq=16 Kernel panic - not syncing: Fatal exception Pid: 456, comm: wpa_supplicant Tainted: G D 3.0.13 #1 Call Trace: [<81379e21>] panic+0x53/0x14a [<81004a30>] oops_end+0x73/0x81 [<81004b53>] die+0x4c/0x55 [<81002710>] do_trap+0x7c/0x83 [<81002855>] ? do_bounds+0x58/0x58 [<810028cc>] do_invalid_op+0x77/0x81 [<81040a47>] ? __cancel_work_timer+0xb8/0xe1 [<810489ec>] ? sched_clock_cpu+0x81/0x11f [<8103f809>] ? wait_on_work+0xe2/0xf7 [<8137f807>] error_code+0x67/0x6c [<810300d8>] ? wait_consider_task+0x4ba/0x84c [<81040a47>] ? __cancel_work_timer+0xb8/0xe1 [<810380c9>] ? try_to_del_timer_sync+0x5f/0x67 [<81040a91>] cancel_work_sync+0xf/0x11 [<f88d7b7c>] ath_set_channel+0x62/0x25c [ath9k] [<f88d67d1>] ? ath9k_tx_last_beacon+0x26a/0x85c [ath9k] [<f88d8899>] ath_radio_disable+0x3f1/0x68e [ath9k] [<f90d0edb>] ieee80211_hw_config+0x111/0x116 [mac80211] [<f90dd95c>] __ieee80211_recalc_idle+0x919/0xa37 [mac80211] [<f90dda76>] __ieee80211_recalc_idle+0xa33/0xa37 [mac80211] [<812dbed8>] __dev_open+0x82/0xab Cc: Gary Morain <gmorain@google.com> Cc: Paul Stewart <pstew@google.com> Cc: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Tested-by:
Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by:
Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by:
-
Daniel Vetter authored
commit e57b6886 upstream. According to a bug report, it doesn't have one. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44263Acked-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-Off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Keith Packard <keithp@keithp.com> Signed-off-by:
-
Keith Packard authored
commit c898261c upstream. It is never correct to use intel_crtc->bpp in intel_dp_link_required, so instead pass an explicit bpp in to this function. This patch only supports 18bpp and 24bpp modes, which means that 10bpc modes will be computed incorrectly. Fixing that will require more extensive changes, and so must be addressed separately from this bugfix. intel_dp_link_required is called from intel_dp_mode_valid and intel_dp_mode_fixup. * intel_dp_mode_valid is called to list supported modes; in this case, the current crtc values cannot be relevant as the modes in question may never be selected. Thus, using intel_crtc->bpp is never right. * intel_dp_mode_fixup is called during mode setting, but it is run well before ironlake_crtc_mode_set is called to set intel_crtc->bpp, so using intel_crtc-bpp in this path can only ever get a stale value. Cc: Lubos Kolouch <lubos.kolouch@gmail.com> Cc: Adam Jackson <ajax@redhat.com> Reviewed-by:
Dave Airlie <airlied@redhat.com> Tested-by: camalot@picnicpark.org (Dell Latitude 6510) Tested-by:
Roland Dreier <roland@digitalvampire.org> Signed-off-by:
-
Jiri Olsa authored
commit 7a0153ee upstream. By adding following objects: bench/mem-memcpy-x86-64-asm.o the x86_64 perf binary ended up with executable stack. The reason was that above object are assembler sourced and is missing the GNU-stack note section. In such case the linker assumes that the final binary should not be restricted at all and mark the stack as RWX. Adding section ".note.GNU-stack" definition to mentioned object, with all flags disabled, thus omiting this object from linker stack flags decision. Problem introduced in: $ git describe ea7872b9 v2.6.37-rc2-19-gea7872b9 Reported-at: https://bugzilla.redhat.com/show_bug.cgi?id=783570Reported-by:
Clark Williams <williams@redhat.com> Acked-by:
Eric Dumazet <eric.dumazet@gmail.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1328100848-5630-1-git-send-email-jolsa@redhat.comSigned-off-by:
Jiri Olsa <jolsa@redhat.com> [ committer note: Backported fix to perf/urgent (3.3-rc2+) ] Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Naveen N. Rao authored
commit a4a03fc7 upstream. This patch fixes an issue where perf report shows nan% for certain perf.data files. The below is from a report for a do_fork probe: -nan% sshd [kernel.kallsyms] [k] do_fork -nan% packagekitd [kernel.kallsyms] [k] do_fork -nan% dbus-daemon [kernel.kallsyms] [k] do_fork -nan% bash [kernel.kallsyms] [k] do_fork A git bisect shows commit f3bda2c9 as the cause. However, looking back through the git history, I saw commit 640c03ce which seems to have removed the required initialization for perf_sample->period. The problem only started showing after commit f3bda2c9. The below patch re-introduces the initialization and it fixes the problem for me. With the below patch, for the same perf.data: 73.08% bash [kernel.kallsyms] [k] do_fork 8.97% 11-dhclient [kernel.kallsyms] [k] do_fork 6.41% sshd [kernel.kallsyms] [k] do_fork 3.85% 20-chrony [kernel.kallsyms] [k] do_fork 2.56% sendmail [kernel.kallsyms] [k] do_fork This patch applies over current linux-tip commit 9949284. Problem introduced in: $ git describe 640c03ce v2.6.37-rc3-83-g640c03ce Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Robert Richter <robert.richter@amd.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20120203170113.5190.25558.stgit@localhost6.localdomain6Signed-off-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by:
-
Greg Rose authored
commit 06292921 upstream. Recent addition of code to find already allocated VFs failed to take account that systems with 2 or more multi-port SR-IOV capable controllers might have already enabled VFs. Make sure that the VFs the function is finding are actually subordinate to the particular instance of the adapter that is looking for them and not subordinate to some device that has previously enabled SR-IOV. This is applicable to 3.2+ kernels. Reported-by:
David Ahern <daahern@cisco.com> Signed-off-by:
Greg Rose <gregory.v.rose@intel.com> Tested-by:
Robert E Garrett <robertX.e.garrett@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Greg Rose authored
commit a4b08329 upstream. Recent addition of code to find already allocated VFs failed to take account that systems with 2 or more multi-port SR-IOV capable controllers might have already enabled VFs. Make sure that the VFs the function is finding are actually subordinate to the particular instance of the adapter that is looking for them and not subordinate to some device that has previously enabled SR-IOV. This bug exists in 3.2 stable as well as 3.3 release candidates. Reported-by:
-
- 13 Feb, 2012 9 commits
-
-
Greg Kroah-Hartman authored
-
Andreas Herrmann authored
commit a8eb2848 upstream. The driver uses the pstate number from the status register as index in its table of ACPI pstates (powernow_table). This is wrong as this is not a 1-to-1 mapping. For example we can have _PSS information to just utilize Pstate 0 and Pstate 4, ie. powernow-k8: Core Performance Boosting: on. powernow-k8: 0 : pstate 0 (2200 MHz) powernow-k8: 1 : pstate 4 (1400 MHz) In this example the driver's powernow_table has just 2 entries. Using the pstate number (4) as index into this table is just plain wrong. Signed-off-by:
Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by:
Dave Jones <davej@redhat.com> Signed-off-by:
-
Andreas Herrmann authored
commit 201bf0f1 upstream. Due to CPB we can't directly map SW Pstates to Pstate MSRs. Get rid of the paranoia check. (assuming that the ACPI Pstate information is correct.) Signed-off-by:
-
Axel Lin authored
commit b5266ea6 upstream. Signed-off-by:
Axel Lin <axel.lin@gmail.com> Acked-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by:
-
Dan Magenheimer authored
commit 9256a478 upstream. I discovered this deadlock condition awhile ago working on RAMster but it affects zcache as well. The list spinlock must be locked prior to the page spinlock and released after. As a result, the page copy must also be done while the locks are held. Applies to 3.2. Konrad, please push (via GregKH?)... this is definitely a bug fix so need not be pushed during a -rc0 window. Signed-off-by:
Dan Magenheimer <dan.magenheimer@oracle.com> Acked-by:
-
Dan Magenheimer authored
commit e8b45534 upstream. SWIZ_BITS > 8 results in a much larger number of "tmem_obj" allocations, likely one per page-placed-in-frontswap. The tmem_obj is not huge (roughly 100 bytes), but it is large enough to add a not-insignificant memory overhead to zcache. The SWIZ_BITS=8 will get roughly the same lock contention without the space wastage. The effect of SWIZ_BITS can be thought of as "2^SWIZ_BITS is the number of unique oids that be generated" (This concept is limited to frontswap's use of tmem). Acked-by:
Seth Jennings <sjenning@linux.vnet.ibm.com> Signed-off-by:
-
Rui li authored
commit 1608ea5f upstream. As ZTE have and will use more pid for new products this year, so we need to add some new zte 3g-dongle's pid on option.c , and delete one pid 0x0154 because it use for mass-storage port. Signed-off-by:
Rui li <li.rui27@zte.com.cn> Signed-off-by:
-
Milan Kocian authored
commit 90451e69 upstream. Signed-off-by:
Milan Kocian <milon@wq.cz> Signed-off-by:
-
Jayachandran C authored
commit e4436a7c upstream. The Netlogic XLP SoC's on-chip USB controller appears as a PCI USB device, but does not need the EHCI/OHCI handoff done in usb/host/pci-quirks.c. The pci-quirks.c is enabled for all vendors and devices, and is enabled if USB and PCI are configured. If we do not skip the qurik handling on XLP, the readb() call in ehci_bios_handoff() will cause a crash since byte access is not supported for EHCI registers in XLP. Signed-off-by:
Jayachandran C <jayachandranc@netlogicmicro.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
